Instruction for LA66 Peer to Peer firmware
Version 3.1 by Edwin Chen on 2022/09/24 13:51
Overview:
This instruction is for how to use Peer to Peer firmware in LA66.
Firmware Location:
Click here to download the firmware and update it to LA66 according to the instruction for different boards.
How to use?
AT Command Set.
Set TX and RX Bandwidth
Set TX and RX BandWidth (0 ~ 9)
0: 125 kHz
1: 250 kHz
2: 500 kHz
3: 62.5 kHz
4: 41.67 kHz
5: 31.25 kHz
6: 20.83 kHz
7: 15.63 kHz
8: 10.42 kHz
9: 7.81 kHz
Default Value: AT+BW=0,0 // BandWidth: 125kHz ,125kHz
Range: (0 ~ 9)
No comments for this page