Skip to Content

Wiki source code of Armbian OS instruction

Version 26.1 by Kilight Cao on 2022/06/02 11:59
Show last authors
1 **Table of Contents：**
2
3 {{toc/}}
4
5 = Overview =
6
7 This is a general instruction for the use of Armbian base OS of Dragino devices. Current models include:
8
9 * HP0A
10 * HP0C
11 * LPS8v2
12
13 = Development Guide =
14
15 For advanced users to develop Driver/ Linux etc
16
17
18 = Advance =
19
20 == SSH Access for Linux console ==
21
22 Connect the HP0C Ethernet port to your router and HP0C will obtain an IP address from your router. In the router’s management portal, you should be able to find what IP address the router has assigned to the HP0C. You can use this IP to connect the SSH access of HP0C.
23
24 IP address:  IP address of HP0C
25
26 Port:         22
27
28 User Name:      **root**
29
30 Password:  **draginohp** (default)
31
32 After logging in, you will be in the Linux console and can enter commands as shown below.
33
34
35 == How to flash SD card to eMMC ==
36
37
38 Run command:
39
40 (% class="box infomessage" %)
41 (((
42 nand-sata-install
43 )))
44
45 [[image:image-20220602112051-1.png]]
46
47 **Select the "Boot from eMMC - system on eMMC"**
48
49 [[image:image-20220602112058-2.png||height="292" width="646"]]
50
51 [[image:image-20220602112106-3.png||height="301" width="643"]]
52
53
54 **Select the "1  ext4"**
55
56 [[image:image-20220602112113-4.png||height="271" width="642"]]
57
58
59 **It takes 4-5 minutes to burn from SD card to eMMC**
60
61 [[image:image-20220602112119-5.png||height="309" width="641"]]
62
63 [[image:image-20220602112125-6.png||height="281" width="640"]]
64
65 [[image:image-20220602112131-7.png||height="241" width="638"]]
66
67
68 (% style="color:red" %)**Note: After the flash is complete, power off the device and then remove the SD card**
69
70 == How to recompile LoRaWAN Concentrator Driver ( dragino-fwd package). ==
71
72 === Step 1. Clone dragino-fwd package ===
73
74
75 Run command clone dragino-fwd package:
76
77 (% class="box infomessage" %)
78 (((
79 git clone https:~/~/github.com/dragino/dragino_fwd_src.git
80 )))
81
82 [[image:image-20220527151010-1.png]]
83
84
85 === Step 2. Compile dragino_fwd ===
86
87
88 After cloning is complete, Run the command starts compiling:
89
90 (% class="box infomessage" %)
91 (((
92 Compile HP0D/rasspberrypi fwd：  ./hp0z-make-deb.sh d
93 Compile HP0C/HP0A fwd：  ./hp0z-make-deb.sh c
94 )))
95
96 The following example compilers HP0C fwd.
97
98 [[image:image-20220527153913-3.png]]
99
100
101 **When the compilation is complete a draginofwd-*.deb package is generated.**
102
103 [[image:image-20220527154311-4.png||height="385" width="773"]]
104
105
106 === Step 3. Install the dragino_fwd ===
107
108
109 Run command:
110
111 (% class="box infomessage" %)
112 (((
113 dpkg -i draginofwd-*.deb
114 )))
115
116 [[image:image-20220527154811-5.png]]
117
118
119 === Step 4. Test ===
120
121
122 Check the dragino_fwd log:
123
124 (% class="box infomessage" %)
125 (((
126 journalctl -u draginofwd -f
127 )))
128
129 [[image:image-20220527165221-7.png||height="182" width="931"]]
130
131 Start/stop dragino_fwd via systemctl:
132
133 (% class="box infomessage" %)
134 (((
135 systemctl start draginofwd
136 systemctl stop draginofwd
137 )))
138
139
140