Changes for page Armbian OS instruction

Last modified by Edwin Chen on 2025/02/26 08:18
<
From version < 96.1 >
edited by Kilight Cao
on 2023/05/08 15:53
To version < 102.1 >
edited by Xiaoye
on 2023/07/12 20:25
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -93,33 +93,118 @@
93 93  
94 94  == 2.2  How to clone Complete OS on the EMMC to SD card ==
95 95  
96 -== 2.3  How to flash SD card to (eMMC) device's built-in Memory ==
97 97  
98 -=== 2.3.1 Prepare an SD card with OS ===
99 99  
100 100  
101 - (% style="background-color:yellow" %)//**Preparations:**//
102 102  
103 -~1. Prepare an SD card and a// card reader device//
104 104  
105 -2. Formatting the SD card (//Make sure the SD card is empty//)
106 106  
107 -3. //Download the OS image from the **[[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]**: ( File format **dragino-lps8v2-1.7.img** )//
108 108  
109 -4. //A Flash software tool ( Such as v1.7.9 from **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
110 110  
111 111  
112 112  
113 -=== 2.3.2 Flash SD card to device's eMMC ===
114 114  
115 115  
116 -//1. Open the device's enclosure, and put the SD card into the SD card slot//
117 117  
118 -//2. Power on the device and access the gateway's CLI via the serial port.//
119 119  
120 -//3. Login and run the below command to flash.//
121 121  
111 +== 2.3  How to flash a new image(OS) to the gateway(LPS8V2) ==
122 122  
113 +
114 +Since the gateway has a large system, you need to use the sd card to reflash the system for the gateway
115 +
116 +
117 +//2.3.1: Making an SD card with the new image//
118 +
119 +//2.3.2: Instal the SD card to the gateway//
120 +
121 +//2.3.3: Flash the image to the gateway's built memory from the SD card//
122 +
123 +//2.3.4: Finished the process of flash and power cycle the gateway//
124 +
125 +
126 +==== (% style="background-color:yellow" %)**//Preparations~://**(%%) ====
127 +
128 +1. Prepare an SD card
129 +1. Prepare a card reader device
130 +1. Download the OS image from the [[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]: ( File format dragino-lps8v2-1.7.img )
131 +1. A Flash software tool ( Such as v1.7.9 from [[balenaEtcher>>url:https://www.balena.io/etcher/]] )
132 +1. SD Card [[format>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]] tool
133 +
134 +
135 +=== **2.3.1 Making an SD Card with the new image** ===
136 +
137 +
138 +==== Step 1.  Formatting the SD Card ====
139 +
140 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609111027-9.png?rev=1.1||alt="image-20220609111027-9.png" height="318" width="292"]]
141 +
142 +
143 +==== Step 2. Select the OS image ====
144 +
145 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104907-8.png?rev=1.1||alt="image-20220609104907-8.png" height="435" width="689"]]
146 +
147 +
148 +==== Step 3. Select the target ====
149 +
150 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104637-2.png?rev=1.1||alt="image-20220609104637-2.png" height="436" width="690"]]
151 +
152 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104701-3.png?rev=1.1||alt="image-20220609104701-3.png" height="436" width="690"]]
153 +
154 +
155 +==== Step 4. Flash start ====
156 +
157 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104727-4.png?rev=1.1||alt="image-20220609104727-4.png" height="435" width="689"]]
158 +
159 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104741-5.png?rev=1.1||alt="image-20220609104741-5.png" height="434" width="687"]]
160 +
161 +
162 +
163 +=== **2.3.2 Instal the SD card to the gateway** ===
164 +
165 +1. Open the device's enclosure, and put the SD card into the SD card slot
166 +
167 +[[image:image-20230712201032-1.png]]
168 +
169 +
170 +2. Power the gateway with 5V2A, and access the gateway's Ethernet port to your PC
171 +
172 +[[image:image-20230712201458-3.png||height="649" width="832"]]
173 +
174 +
175 +Note: The PWR LED on red
176 +
177 + The  LAN LED blink
178 +
179 + The SYS LED on red
180 +
181 +
182 +
183 +=== **3.2.3 Flash the image to the gateway's built memory from the SD card** ===
184 +
185 +
186 +Access the gateway Linux CLI to flash the image to the gateway's built memory
187 +
188 +
189 +* **Use the IP address to access the gateway CLI**
190 +
191 +Users can access the gateway CLI via the SSH protocol. Make sure your PC and the gateway are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
192 +
193 +
194 +IP address:  IP address of gateway or **Fallback IP**(172.31.255.254)
195 +
196 +Port:  22
197 +
198 +User Name:      (% style="color:blue" %)**root**
199 +
200 +Password:         (% style="color:blue" %)**dragino**(%%) (default)
201 +
202 +//After logging in, you will be in the gateway CLI and can enter commands as shown below.//
203 +
204 +
205 +[[image:image-20230508155357-1.png||height="225" width="634"]]
206 +
207 +
123 123  **Run command:**
124 124  
125 125  (% style="background-color:yellow; color:green" %)**nand-sata-install**
... ... @@ -281,143 +281,6 @@
281 281  )))
282 282  
283 283  
284 -== 2.7 How to install BACnet ==
285 -
286 -
287 -(% class="box infomessage" %)
288 -(((
289 -wget [[http:~~/~~/dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb>>url:http://dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb]]
290 -dpkg -i dragino-bacnet-apps-hp0c-2023-03-01.deb
291 -)))
292 -
293 -[[image:image-20230327152105-1.png||height="163" width="933"]]
294 -
295 -
296 -=== 2.7.1 Configure BACnet ===
297 -
298 -
299 -After BACnet is installed, run commands to modify BACnet configurations
300 -
301 -(% style="color:red" %)**Note: device_port and bacnet_ip_port are not set to the same**
302 -
303 -(% class="box infomessage" %)
304 -(((
305 -nano /etc/config/bacnet
306 -)))
307 -
308 -**Examples:**
309 -
310 -(% class="box infomessage" %)
311 -(((
312 -config settings 'general'
313 - option bacnet_ip '10.130.2.80'  #The IP address of the BACnetIP network, here basically the same IP as the bbmd address below
314 - option bacnet_ip_port '47808'  #As with bbmd_port, the purpose of this is to register a Bacnet Server application as a bbmd registration server
315 - option bbmd_address '10.130.2.80'  #bbmd is the BACnet registration server. Only one bbmd server is required in the same ip network
316 - option bbmd_port '47808'  #In general, 47808 is used as the default port
317 - option bacnet_dev_count '2'  #Here is the number of BACnet devices that need to be simulated, if the number is 2, then the following settings must have 2, which are bacdev_1, bacdev_2
318 -
319 -config settings 'bacdev_1'
320 - option device_name 'LHT65N-1'  #The identification name of the bacnet device
321 - option device_id '10001'  #The unique identification code in the same network segment of BACnet,Scope is(1 - 4194302)
322 - option device_port '47912'  #The IP port occupied by Bacnet when it starts, Scope is (1024 - 65535)
323 -
324 -config settings 'bacdev_2'
325 - option device_name 'LHT65N-2'
326 - option device_id '10002'
327 - option device_port '47913'  
328 -)))
329 -
330 -
331 -=== 2.7.2 Run BACnet ===
332 -
333 -
334 -After the configuration is complete, run the following command to start BACnet, The following are two ways to run BACnet:
335 -
336 -(1) With /etc/config/bacnet configuration, and to run the registration server on the current machine, start it with the following command (configure the /etc/config/bacnet file correctly):
337 -
338 -(% class="box infomessage" %)
339 -(((
340 -bacserver -c -s
341 -)))
342 -
343 -
344 -(2) Without /etc/config/bacnet, and to run the registration server on the current machine, start it with the following command:
345 -
346 -(% class="box infomessage" %)
347 -(((
348 -bacserver -s -a 10.130.2.80 -p 47808
349 -)))
350 -
351 -This command simulates two devices, with device IDs 47910 and 47911
352 -
353 -Enter bacserver -h to output help
354 -
355 -(% class="box infomessage" %)
356 -(((
357 -bacserver -h
358 -)))
359 -
360 -[[image:image-20230327154700-3.png]]
361 -
362 -
363 -=== 2.7.3 Read devices and modify devices ===
364 -
365 -
366 -Enter baccli -h to output help
367 -
368 -(% class="box infomessage" %)
369 -(((
370 -baccli -h
371 -)))
372 -
373 -[[image:image-20230327165836-1.png]]
374 -
375 -
376 -**Examples:**
377 -
378 -(1) List the current Bacnet devices:
379 -
380 -(% class="box infomessage" %)
381 -(((
382 -baccli -l -a
383 -)))
384 -
385 -[[image:image-20230327174537-3.png]]
386 -
387 -
388 -(2) List device information based on device ID:
389 -
390 -(% class="box infomessage" %)
391 -(((
392 -baccli -l -i id
393 -)))
394 -
395 -[[image:image-20230327174556-4.png]]
396 -
397 -
398 -(3) List the device details by device ID:
399 -
400 -(% class="box infomessage" %)
401 -(((
402 -baccli -l -v -i id
403 -)))
404 -
405 -
406 -(4) Modify the specified attribute value based on the device ID:
407 -
408 -(% class="box infomessage" %)
409 -(((
410 -baccli -i id -p prop -w value
411 -)))
412 -
413 -[[image:image-20230327174853-5.png]]
414 -
415 -
416 -The user can check the data of the device by using the **[[yabe BACnet tool>>https://sourceforge.net/projects/yetanotherbacnetexplorer/]]**
417 -
418 -[[image:image-20230327171824-2.png]]
419 -
420 -
421 421  = 3.  Package Management =
422 422  
423 423  == 3.1 Default Package Maintain System ==
image-20230712201032-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +872.4 KB
Content
image-20230712201424-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +872.4 KB
Content
image-20230712201458-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +854.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0