Changes for page Armbian OS instruction

Last modified by Edwin Chen on 2025/02/26 08:18
<
From version < 94.1 >
edited by Kilight Cao
on 2023/03/27 17:48
To version < 120.1 >
edited by Xiaoye
on 2024/11/07 10:11
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Kilight
1 +XWiki.Xiaoye
Content
... ... @@ -93,294 +93,372 @@
93 93  
94 94  == 2.2  How to clone Complete OS on the EMMC to SD card ==
95 95  
96 -== 2.3  How to flash SD card to (eMMC) device's built-in Memory ==
97 97  
98 -=== 2.3.1 Prepare an SD card with OS ===
97 +**2.2.1 Prepare a USB flash drive/SD card and plug it into the USB port of the gateway.**
99 99  
100 100  
101 - (% style="background-color:yellow" %)//**Preparations:**//
100 +**2.2.2 Mounting a USB Flash Drive/SD Card in the Linux CLI**
102 102  
103 -~1. Prepare an SD card and a// card reader device//
104 104  
105 -2. Formatting the SD card (//Make sure the SD card is empty//)
103 +(% id="cke_bm_13244S" style="display:none" %) [[image:image-20241107100929-2.png||height="208" width="669"]]
106 106  
107 -3. //Download the OS image from the **[[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]**: ( File format **dragino-lps8v2-1.7.img** )//
105 +mount /dev/sda1 /mnt/
108 108  
109 -4. //A Flash software tool ( Such as v1.7.9 from **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
110 110  
108 +**2.2.3 Using the dd command, copy Emmc as an img file**
111 111  
112 112  
113 -=== 2.3.2 Flash SD card to device's eMMC ===
111 +[[image:image-20241107100901-1.png||height="269" width="994"]]
114 114  
115 115  
116 -//1. Open the device's enclosure, and put the SD card into the SD card slot//
114 +dd if=/dev/mmcblk2 of=/mnt/custom.img bs=1M count=3686 status=progress
117 117  
118 -//2. Power on the device and access the gateway's CLI via the serial port.//
119 119  
120 -//3. Login and run the below command to flash.//
117 +**2.2.4 Export the img file and follow the steps in 2.3 for burning**
121 121  
122 122  
123 -**Run command:**
124 124  
125 -(% style="background-color:yellow; color:green" %)**nand-sata-install**
121 +== 2.3  How to flash a new image(OS) to the gateway(LPS8V2) ==
126 126  
127 127  
128 -[[image:image-20220602112051-1.png]]
124 +Since the gateway has a large system, you need to use the sd card to reflash the system for the gateway
129 129  
130 130  
127 +//2.3.1: Making an SD card with the new image//
131 131  
132 -Select the (% style="color:red" %)**"Boot from eMMC - system on eMMC".**
129 +//2.3.2: Instal the SD card to the gateway//
133 133  
134 -[[image:image-20220602112058-2.png||height="292" width="646"]]
131 +//2.3.3: Flash the image to the gateway's built memory from the SD card//
135 135  
133 +//2.3.4: Finished the process of flash and power cycle the gateway//
136 136  
137 -[[image:image-20220602112106-3.png||height="301" width="643"]]
138 138  
136 +==== (% style="background-color:yellow" %)**//Preparations~://**(%%) ====
139 139  
138 +1. Prepare an SD card
139 +1. Prepare a card reader device
140 +1. Download the OS image from the release.image~: **[[draginolps8v2-release-v1.7>>http://repo.dragino.com/release/hp0c-image/]]**
141 +1. A Flash software tool ( Such as v1.7.9 from [[balenaEtcher>>url:https://www.balena.io/etcher/]] )
142 +1. SD Card [[format>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]] tool
140 140  
141 -Select the (% style="color:red" %)**"1  ext4"**
144 +=== **2.3.1 Making an SD Card with the new image** ===
142 142  
143 -[[image:image-20220602112113-4.png||height="271" width="642"]]
144 144  
147 +==== Step 1.  Formatting the SD Card ====
145 145  
149 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609111027-9.png?rev=1.1||alt="image-20220609111027-9.png" height="318" width="292"]]
146 146  
147 -It takes 4-5 minutes to burn from SD card to eMMC
148 148  
149 -[[image:image-20220602112119-5.png||height="309" width="641"]]
152 +==== Step 2. Select the OS image ====
150 150  
154 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104907-8.png?rev=1.1||alt="image-20220609104907-8.png" height="435" width="689"]]
151 151  
152 -[[image:image-20220602112125-6.png||height="281" width="640"]]
153 153  
157 +==== Step 3. Select the target ====
154 154  
155 -[[image:image-20220602112131-7.png||height="241" width="638"]]
159 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104637-2.png?rev=1.1||alt="image-20220609104637-2.png" height="436" width="690"]]
156 156  
161 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104701-3.png?rev=1.1||alt="image-20220609104701-3.png" height="436" width="690"]]
157 157  
158 -(% style="color:red" %)**Note: After the flash is complete, power off the device and then remove the SD card.**
159 159  
164 +==== Step 4. Flash start ====
160 160  
161 -== 2.4 Default Built Version ==
166 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104727-4.png?rev=1.1||alt="image-20220609104727-4.png" height="435" width="689"]]
162 162  
168 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104741-5.png?rev=1.1||alt="image-20220609104741-5.png" height="434" width="687"]]
163 163  
164 -[[image:image-20220902155621-1.png]]
165 165  
166 166  
167 -== 2.5 How to upgrade the nodejs version to the latest. ==
172 +=== **2.3.2 Instal the SD card to the gateway** ===
168 168  
174 +1. Open the device's enclosure, and put the SD card into the SD card slot
169 169  
170 -By default, the nodejs uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
176 +[[image:image-20230712201032-1.png]]
171 171  
172 -[[image:image-20221112145029-2.png]]
173 173  
174 -**If you want to upgrade the nodejs to the latest, please follow to use these commands on the gateway CIL.**
179 +2. Power the gateway with 5V2A, and access the gateway's Ethernet port to your PC
175 175  
181 +[[image:image-20230712201458-3.png||height="649" width="832"]]
176 176  
177 -#install n, which is an Interactively Manage Your Node.js Versions
178 178  
179 -[[image:image-20221112154230-3.png||height="89" width="689"]]
184 +Note: The PWR LED on red
180 180  
181 -(% class="box infomessage" %)
182 -(((
183 -**npm install -g n**
184 -)))
186 + The  LAN LED blink
185 185  
188 + The SYS LED on red
186 186  
187 -#Install the latest LTS Node.js release (downloading if necessary)
188 188  
189 -[[image:image-20221112154418-4.png||height="184" width="893"]]
190 190  
191 -(% class="box infomessage" %)
192 -(((
193 -**n lts**
194 -)))
192 +=== **3.2.3 Flash the image to the gateway's built memory from the SD card(LPS8v2)** ===
195 195  
196 196  
197 -#Remove all downloaded versions except the installed version
195 +Access the gateway Linux CLI to flash the image to the gateway's built memory
198 198  
199 -[[image:image-20221112154456-5.png||height="139" width="899"]]
200 200  
201 -(% class="box infomessage" %)
202 -(((
203 -**n prune**
204 -)))
198 +* **Use the IP address to access the gateway CLI**
205 205  
200 +Users can access the gateway CLI via the SSH protocol. Make sure your PC and the gateway are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
206 206  
207 -(% class="box infomessage" %)
208 -(((
209 -**apt remove nodejs -y && apt autoremove -y && reboot**
210 -)))
211 211  
203 +IP address:  IP address of gateway or **Fallback IP**(172.31.255.254)
212 212  
213 -Check the current version
205 +Port:  22
214 214  
215 -[[image:image-20221112154724-6.png]]
207 +User Name:      (% style="color:blue" %)**root**
216 216  
217 -(% class="box infomessage" %)
218 -(((
219 -**node -v**
220 -)))
209 +Password:         (% style="color:blue" %)**dragino**(%%) (default)
221 221  
211 +//After logging in, you will be in the gateway CLI and can enter commands as shown below.//
222 222  
223 -== 2.6 How to install Grafana and influxdb ==
224 224  
214 +[[image:image-20230508155357-1.png||height="225" width="634"]]
225 225  
226 -=== **Grafana:** ===
227 227  
217 +**Run command:**
228 228  
229 -(% class="box infomessage" %)
230 -(((
231 -curl https:~/~/packages.grafana.com/gpg.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/grafana-archive-keyrings.gpg >/dev/null
232 -echo "deb [signed-by=/usr/share/keyrings/grafana-archive-keyrings.gpg] https:~/~/packages.grafana.com/oss/deb stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
233 -apt update && apt install grafana
234 -)))
219 +draginolps8v2-release-chirpsrtack-v1.7-240725 image :
235 235  
221 +(% style="background-color:#ffff00; color:#008000" %)** flash_emmc /usr/local/image/dragino-LPS8V2-ChirpStack-240725-1.img **
236 236  
237 -Check the running status:
223 +draginolps8v2-release-ttnstack-v1.7-240712 image :
238 238  
225 +(% style="background-color:#ffff00; color:#008000" %)** flash_emmc /usr/local/image/dragino-LPS8V2-TTN-231124.img**
239 239  
240 -(% class="box infomessage" %)
241 -(((
242 -systemctl status grafana-server
243 -)))
227 +[[image:image-20241008091850-2.png]]
244 244  
229 +(% style="color:red" %)**Note: Note: After the flash is completed, please power off the device (run the command halt) and disconnect the power supply, and then unplug the SD card.**
245 245  
246 -configuration path:
247 247  
232 +=== **3.2.4 Flash the image to the gateway's built memory from the SD card(MS48-LR)** ===
248 248  
234 +
235 +Download the OS image from the release.image~: **[[MS48-LR-image>>https://www.dropbox.com/scl/fi/ug25bbwyk6gnqjnsee2m1/dragino-MS48-LR-231124.rar?rlkey=bqva7hkeft0m3haiui5uj12sv&st=ii6mp2g7&dl=0]]**
236 +
237 +
238 +Access the gateway Linux CLI to flash the image to the gateway's built memory
239 +
240 +* **Use the IP address to access the gateway CLI**
241 +
242 +Users can access the gateway CLI via the SSH protocol. Make sure your PC and the gateway are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
243 +
244 +IP address:  IP address of gateway or **Fallback IP**(172.31.255.254)
245 +
246 +Port:  22
247 +
248 +User Name:      **root**
249 +
250 +Password:         **dragino** (default)
251 +
252 +//After logging in, you will be in the gateway CLI and can enter commands as shown below.//
253 +
254 +[[image:https://wiki.dragino.com/xwiki/bin/downloadrev/Main/Armbian%20OS%20instruction/WebHome/image-20230508155357-1.png?rev=1.1&width=634&height=225||alt="image-20230508155357-1.png" height="225" width="634"]]
255 +
256 +**Run command:**
257 +
258 +**nand-sata-install**
259 +
260 +[[image:https://wiki.dragino.com/xwiki/bin/downloadrev/Main/Armbian%20OS%20instruction/WebHome/image-20220602112051-1.png?rev=1.1||alt="image-20220602112051-1.png"]]
261 +
262 +Select the **"Boot from eMMC - system on eMMC".**
263 +
264 +[[image:https://wiki.dragino.com/xwiki/bin/downloadrev/Main/Armbian%20OS%20instruction/WebHome/image-20220602112058-2.png?rev=1.1&width=646&height=292||alt="image-20220602112058-2.png" height="292" width="646"]]
265 +
266 +[[image:https://wiki.dragino.com/xwiki/bin/downloadrev/Main/Armbian%20OS%20instruction/WebHome/image-20220602112106-3.png?rev=1.1&width=643&height=301||alt="image-20220602112106-3.png" height="301" width="643"]]
267 +
268 +Select the **"1  ext4"**
269 +
270 +[[image:https://wiki.dragino.com/xwiki/bin/downloadrev/Main/Armbian%20OS%20instruction/WebHome/image-20220602112113-4.png?rev=1.1&width=642&height=271||alt="image-20220602112113-4.png" height="271" width="642"]]
271 +
272 +It takes 4-5 minutes to burn from SD card to eMMC
273 +
274 +[[image:https://wiki.dragino.com/xwiki/bin/downloadrev/Main/Armbian%20OS%20instruction/WebHome/image-20220602112119-5.png?rev=1.1&width=641&height=309||alt="image-20220602112119-5.png" height="309" width="641"]]
275 +
276 +[[image:https://wiki.dragino.com/xwiki/bin/downloadrev/Main/Armbian%20OS%20instruction/WebHome/image-20220602112125-6.png?rev=1.1&width=640&height=281||alt="image-20220602112125-6.png" height="281" width="640"]]
277 +
278 +[[image:https://wiki.dragino.com/xwiki/bin/downloadrev/Main/Armbian%20OS%20instruction/WebHome/image-20220602112131-7.png?rev=1.1&width=638&height=241||alt="image-20220602112131-7.png" height="241" width="638"]]
279 +
280 +**Note: After the flash is complete, power off the device and then remove the SD card.**
281 +
282 +
283 +== 2.4 How to extend the gateway size of memory with SD card ==
284 +
285 +
286 +Users can use the SD card slot to expand the gateway memory size by following the steps below
287 +
288 +
289 +=== 2.4.1 View SD card information ===
290 +
249 249  (% class="box infomessage" %)
250 250  (((
251 -/etc/grafana/grafana.ini
293 +fdisk -l
252 252  )))
253 253  
296 +[[image:image-20230831150518-3.png]]
254 254  
255 -=== **Influxdb:** ===
256 256  
299 +=== 2.4.2 Displays the current file system disk usage statistics on Linux systems ===
257 257  
301 +
258 258  (% class="box infomessage" %)
259 259  (((
260 -curl https:~/~/repos.influxdata.com/influxdb.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/influxdb-archive-keyring.gpg >/dev/null
261 -echo "deb [signed-by=/usr/share/keyrings/influxdb-archive-keyring.gpg] https:~/~/repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
262 -apt update && apt install influxdb
304 +df -h
263 263  )))
264 264  
307 +[[image:image-20230831150341-2.png]]
265 265  
266 -Check the running status:
267 267  
310 +=== 2.4.3 Mount SD card ===
268 268  
312 +
269 269  (% class="box infomessage" %)
270 270  (((
271 -systemctl status influxdb
315 +mkdir /mnt/sd
316 +
317 +mount /dev/mmcblk0p1 /mnt/sd
272 272  )))
273 273  
320 +After the mount is successful to check the file system disk usage on the Linux system again:
274 274  
275 -configuration path:
322 +[[image:image-20230831151432-4.png]]
276 276  
277 277  
325 +If the mount fails, you can format the file system and try the mount again
326 +
278 278  (% class="box infomessage" %)
279 279  (((
280 -/etc/influxdb/influxdb.conf
329 +mkfs.ext4 /dev/mmcblk0p1
281 281  )))
282 282  
332 +== 2.5 Default Built Version ==
283 283  
284 -== 2.7 How to install BACnet ==
285 285  
335 +[[image:image-20220902155621-1.png]]
286 286  
337 +
338 +== 2.6 How to upgrade the nodejs version to the latest. ==
339 +
340 +
341 +By default, the nodejs uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
342 +
343 +[[image:image-20221112145029-2.png]]
344 +
345 +**If you want to upgrade the nodejs to the latest, please follow to use these commands on the gateway CIL.**
346 +
347 +
348 +#install n, which is an Interactively Manage Your Node.js Versions
349 +
350 +[[image:image-20221112154230-3.png||height="89" width="689"]]
351 +
287 287  (% class="box infomessage" %)
288 288  (((
289 -wget [[http:~~/~~/dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb>>url:http://dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb]]
290 -dpkg -i dragino-bacnet-apps-hp0c-2023-03-01.deb
354 +**npm install -g n**
291 291  )))
292 292  
293 -[[image:image-20230327152105-1.png||height="163" width="933"]]
294 294  
358 +#Install the latest LTS Node.js release (downloading if necessary)
295 295  
296 -=== 2.7.1 Configure BACnet ===
360 +[[image:image-20221112154418-4.png||height="184" width="893"]]
297 297  
362 +(% class="box infomessage" %)
363 +(((
364 +**n lts**
365 +)))
298 298  
299 -After BACnet is installed, run commands to modify BACnet configurations
300 300  
301 -Note: device_port and bacnet_ip_port are not set to the same
368 +#Remove all downloaded versions except the installed version
302 302  
370 +[[image:image-20221112154456-5.png||height="139" width="899"]]
371 +
303 303  (% class="box infomessage" %)
304 304  (((
305 -nano /etc/config/bacnet
374 +**n prune**
306 306  )))
307 307  
308 -Examples:
309 309  
310 310  (% class="box infomessage" %)
311 311  (((
312 -config settings 'general'
313 - option bacnet_ip '10.130.2.80'  #The IP address of the BACnetIP network, here basically the same IP as the bbmd address below
314 - option bacnet_ip_port '47808'  #As with bbmd_port, the purpose of this is to register a Bacnet Server application as a bbmd registration server
315 - option bbmd_address '10.130.2.80'  #bbmd is the BACnet registration server. Only one bbmd server is required in the same ip network
316 - option bbmd_port '47808'  #In general, 47808 is used as the default port
317 - option bacnet_dev_count '2'  #Here is the number of BACnet devices that need to be simulated, if the number is 2, then the following settings must have 2, which are bacdev_1, bacdev_2
380 +**apt remove nodejs -y && apt autoremove -y && reboot**
381 +)))
318 318  
319 -config settings 'bacdev_1'
320 - option device_name 'LHT65N-1'  #The identification name of the bacnet device
321 - option device_id '10001'  #The unique identification code in the same network segment of BACnet,Scope is(1 - 4194302)
322 - option device_port '47912'  #The IP port occupied by Bacnet when it starts, Scope is (1024 - 65535)
323 323  
324 -config settings 'bacdev_2'
325 - option device_name 'LHT65N-2'
326 - option device_id '10002'
327 - option device_port '47913'  
384 +Check the current version
385 +
386 +[[image:image-20221112154724-6.png]]
387 +
388 +(% class="box infomessage" %)
389 +(((
390 +**node -v**
328 328  )))
329 329  
330 330  
331 -=== 2.7.2 Run BACnet ===
394 +== 2.7 How to install Grafana and influxdb ==
332 332  
333 333  
334 -After the configuration is complete, run the following command to start BACnet, The following are two ways to run BACnet:
397 +=== **Grafana:** ===
335 335  
336 -(1)With /etc/config/bacnet configuration, and to run the registration server on the current machine, start it with the following command (configure the /etc/config/bacnet file correctly):
337 337  
338 338  (% class="box infomessage" %)
339 339  (((
340 -bacserver -c -s
402 +curl https:~/~/packages.grafana.com/gpg.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/grafana-archive-keyrings.gpg >/dev/null
403 +echo "deb [signed-by=/usr/share/keyrings/grafana-archive-keyrings.gpg] https:~/~/packages.grafana.com/oss/deb stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
404 +apt update && apt install grafana
341 341  )))
342 342  
343 -(2)Without /etc/config/bacnet, and to run the registration server on the current machine, start it with the following command:
344 344  
408 +Check the running status:
409 +
410 +
345 345  (% class="box infomessage" %)
346 346  (((
347 -bacserver -s -a 10.130.2.80 -p 47808
413 +systemctl status grafana-server
348 348  )))
349 349  
350 -This command simulates two devices, with device IDs 47910 and 47911
351 351  
352 -Enter bacserver -h to output help
417 +configuration path:
353 353  
419 +
354 354  (% class="box infomessage" %)
355 355  (((
356 -bacserver -h
422 +/etc/grafana/grafana.ini
357 357  )))
358 358  
359 -[[image:image-20230327154700-3.png]]
360 360  
426 +=== **Influxdb:** ===
361 361  
362 -=== 2.7.3 Read devices and modify devices ===
363 363  
429 +(% class="box infomessage" %)
430 +(((
431 +curl https:~/~/repos.influxdata.com/influxdata-archive_compat.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/influxdb-archive-keyring.gpg >/dev/null
432 +echo "deb [signed-by=/usr/share/keyrings/influxdb-archive-keyring.gpg] https:~/~/repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
433 +apt update && apt install influxdb
434 +)))
364 364  
365 -Enter baccli -h to output help
366 366  
437 +Check the running status:
438 +
439 +
367 367  (% class="box infomessage" %)
368 368  (((
369 -baccli -h
442 +systemctl status influxdb
370 370  )))
371 371  
372 -[[image:image-20230327165836-1.png]]
373 373  
374 -Examples:
446 +configuration path:
375 375  
376 376  
377 -= 4. Package Maintain Note =
449 +(% class="box infomessage" %)
450 +(((
451 +/etc/influxdb/influxdb.conf
452 +)))
378 378  
379 -== 4.1 Default Package Maintain System ==
380 380  
381 -=== 4.1.1 How Package-Auto-Update works? ===
455 += 3.  Package Management =
382 382  
457 +== 3.1 Default Package Maintain System ==
383 383  
459 +=== 3.1.1  How Package-Auto-Update works? ===
460 +
461 +
384 384  By default, LPS8v2 / MS20 series products have an auto-update feature for main packages. The device will connect to Dragino's auto-update server and check for updates. 
385 385  
386 386  
... ... @@ -425,7 +425,7 @@
425 425  [[image:1661305258501-636.png]]
426 426  
427 427  
428 -=== 4.1.2 How to manually update core packages? ===
506 +=== 3.1.2 How to manually update core packages? ===
429 429  
430 430  
431 431  You can click the (% style="color:red" %)**‘Manual Update’**(%%) to update the dragino's packages.
... ... @@ -434,27 +434,27 @@
434 434  [[image:1661305328295-218.png]]
435 435  
436 436  
437 -=== 4.1.3 How to manually update other packages? ===
515 +=== 3.1.3 How to manually update other packages? ===
438 438  
439 439  
440 440  For the other packages, you have to access the device's CLI to do it via the apt command.
441 441  
442 442  
443 -== 4.2 Set up a 3^^rd^^ party package maintain server ==
521 +== 3.2 Set up a 3^^rd^^ party package maintain server ==
444 444  
445 -=== 4.2.1 Overview ===
523 +=== 3.2.1 Overview ===
446 446  
447 447  
448 448  Customers can use their own package maintenance system instead of using the default one from Dragino. They need to set up a package maintenance system for Debian. Lots of instructions are available in Internet, below is a reference instruction.
449 449  
450 450  
451 -=== 4.2.2 Install Apache2 HTTP server ===
529 +=== 3.2.2 Install Apache2 HTTP server ===
452 452  
453 453  
454 454  (% style="background-color:yellow; color:green" %)**apt install apache2**
455 455  
456 456  
457 -=== 4.2.3 Creating Package Directories ===
535 +=== 3.2.3 Creating Package Directories ===
458 458  
459 459  
460 460  **~ (% style="background-color:yellow; color:green" %)cd /var/www/html/(%%)**
... ... @@ -490,7 +490,7 @@
490 490   └── dragino   ~-~-> (% style="background-color:yellow; color:green" %)**This is the directory to store the packages. User can change it to other name.**
491 491  
492 492  
493 -=== 4.2.4 Get deb packages ===
571 +=== 3.2.4 Get deb packages ===
494 494  
495 495  
496 496  The deb packages for auto-update can be placed in** (% style="color:blue" %)/var/www/html/debian/release/pool/main/d/dragino/(%%)**
... ... @@ -503,7 +503,7 @@
503 503  **~ (% style="background-color:yellow; color:green" %)cp ./testing-0808.deb /var/www/html/debian/release/pool/main/d/dragino/(%%)**
504 504  
505 505  
506 -=== 4.2.5 Generate Package Index file ===
584 +=== 3.2.5 Generate Package Index file ===
507 507  
508 508  
509 509  (% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/**
... ... @@ -516,7 +516,7 @@
516 516  (% style="color:red" %)**Note: Every time a package has been update, above comments need to be executed in the server to get the up-to-date package list.**
517 517  
518 518  
519 -=== 4.2.6 Generate Release file ===
597 +=== 3.2.6 Generate Release file ===
520 520  
521 521  
522 522  ==== (% style="color:blue" %)**Create the generated script:**(%%) ====
... ... @@ -532,7 +532,7 @@
532 532  (% style="background-color:yellow; color:green" %)**./generate-release.sh > Release**
533 533  
534 534  
535 -=== 4.2.7 Sign the Release file with gpg and generating Inrelease file ===
613 +=== 3.2.7 Sign the Release file with gpg and generating Inrelease file ===
536 536  
537 537  
538 538  ==== (% style="color:blue" %)**Make sure auto-update server has gnupg**(%%) ====
... ... @@ -581,7 +581,7 @@
581 581  
582 582  
583 583  
584 -=== 4.2.8 Add url as apt source in LPS8v2 / MS20 ===
662 +=== 3.2.8 Add url as apt source in LPS8v2 / MS20 ===
585 585  
586 586  
587 587  
... ... @@ -617,7 +617,7 @@
617 617  [[image:1661306420449-569.png]]
618 618  
619 619  
620 -=== 4.2.9 Configure the gateway's auto-upgrade rules ===
698 +=== 3.2.9 Configure the gateway's auto-upgrade rules ===
621 621  
622 622  
623 623  ==== (% style="color:blue" %)**Remove dragino apt source**(%%) ====
... ... @@ -642,3 +642,6 @@
642 642  
643 643  
644 644  [[image:1661306487761-768.png]]
723 +
724 +
725 +
image-20230508155357-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.3 KB
Content
image-20230712201032-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +872.4 KB
Content
image-20230712201424-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +872.4 KB
Content
image-20230712201458-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +854.1 KB
Content
image-20230831144800-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +86.9 KB
Content
image-20230831150341-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +30.7 KB
Content
image-20230831150518-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +89.9 KB
Content
image-20230831151432-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +37.7 KB
Content
image-20241008091544-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +36.1 KB
Content
image-20241008091850-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +36.2 KB
Content
image-20241107100901-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +66.7 KB
Content
image-20241107100929-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +33.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0