Changes for page Armbian OS instruction

Last modified by Edwin Chen on 2025/02/26 08:18
<
From version < 67.1 >
edited by Xiaoling
on 2022/08/24 09:42
To version < 98.1 >
edited by Xiaoye
on 2023/05/08 17:52
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Xiaoye
Content
... ... @@ -15,161 +15,604 @@
15 15  * LPS8v2
16 16  * MS20
17 17  
18 -= 2.  Development Guide =
18 +(% style="display:none" %)
19 19  
20 20  
21 -For advanced users to develop Driver/ Linux etc
21 += 2.  Development Guide =
22 22  
23 23  
24 +For advanced users to develop Driver/ Linux etc.
24 24  
26 +
25 25  == 2.1  How to recompile LoRaWAN Concentrator Driver ( dragino-fwd package). ==
26 26  
27 27  
28 -
29 29  === (% style="color:blue" %)**Step 1. Clone dragino-fwd package**(%%) ===
30 30  
31 31  
32 -(% style="color:red" %)**Requirements:**
33 +**Requirements:**
33 33  
35 +**~ (% style="background-color:yellow; color:green" %)sudo apt install -y libsqlite3-dev(%%)**
36 +
37 +**~ (% style="background-color:yellow; color:green" %)sudo apt install -y libftdi1-dev(%%)**
38 +
39 +
40 +**Run command clone dragino-fwd package: (% style="background-color:yellow; color:green" %)git clone https:~/~/github.com/dragino/dragino_fwd_src.git(%%)**
41 +
42 +
43 +[[image:image-20220527151010-1.png]]
44 +
45 +
46 +=== (% style="color:blue" %)**Step 2. Compile dragino_fwd**(%%) ===
47 +
48 +
49 +**After cloning is complete, Run the command starts compiling:**
50 +
51 +(% style="background-color:yellow; color:green" %)**Compile HP0C/HP0A fwd:  ./hp0z-make-deb.sh c**
52 +
53 +
54 +The following example compilers HP0C fwd.
55 +
56 +[[image:image-20220527153913-3.png]]
57 +
58 +
59 +
60 +When the compilation is complete a** (% style="color:blue" %)draginofwd-*.deb(%%) **package is generated.
61 +
62 +[[image:image-20220527154311-4.png||height="385" width="773"]]
63 +
64 +
65 +=== (% style="color:blue" %)**Step 3. Install the dragino_fwd**(%%) ===
66 +
67 +
68 +**Run command:**
69 +
70 +(% style="background-color:yellow; color:green" %)**dpkg -i draginofwd-*.deb **
71 +
72 +
73 +[[image:image-20220527154811-5.png]]
74 +
75 +
76 +=== (% style="color:blue" %)**Step 4. Test**(%%) ===
77 +
78 +
79 +**Check the dragino_fwd log:**
80 +
81 +(% style="background-color:yellow; color:green" %)**journalctl -u draginofwd -f**
82 +
83 +
84 +[[image:image-20220527165221-7.png||height="182" width="931"]]
85 +
86 +
87 +**Start/stop dragino_fwd via systemctl:**
88 +
89 +(% style="background-color:yellow; color:green" %)**systemctl start draginofwd**
90 +
91 +(% style="background-color:yellow; color:green" %)**systemctl stop draginofwd**
92 +
93 +
94 +== 2.2  How to clone Complete OS on the EMMC to SD card ==
95 +
96 +
97 +
98 +
99 +
100 +
101 +
102 +
103 +
104 +
105 +
106 +
107 +
108 +
109 +
110 +
111 +== 2.3  How to flash SD card to (eMMC) device's built-in Memory ==
112 +
113 +=== 2.3.1 Prepare an SD card with OS ===
114 +
115 +
116 +==== (% style="background-color:yellow" %)**//Preparations~://**(%%) ====
117 +
118 +1. Prepare an SD card and a card reader device
119 +1. Formatting the SD card (Make sure the SD card is empty)
120 +1. Download the OS image from the [[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]: ( File format dragino-lps8v2-1.7.img )
121 +1. A Flash software tool ( Such as v1.7.9 from [[balenaEtcher>>url:https://www.balena.io/etcher/]] )
122 +1. SD Card [[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]
123 +
124 +
125 +==== Step 1.  Formatting the SD Card ====
126 +
127 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609111027-9.png?rev=1.1||alt="image-20220609111027-9.png" height="318" width="292"]]
128 +
129 +
130 +==== Step 2. Select the OS image ====
131 +
132 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104907-8.png?rev=1.1||alt="image-20220609104907-8.png" height="435" width="689"]]
133 +
134 +
135 +==== Step 3. Select the target ====
136 +
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104637-2.png?rev=1.1||alt="image-20220609104637-2.png" height="436" width="690"]]
138 +
139 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104701-3.png?rev=1.1||alt="image-20220609104701-3.png" height="436" width="690"]]
140 +
141 +
142 +==== Step 4. Flash start ====
143 +
144 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104727-4.png?rev=1.1||alt="image-20220609104727-4.png" height="435" width="689"]]
145 +
146 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104741-5.png?rev=1.1||alt="image-20220609104741-5.png" height="434" width="687"]]
147 +
148 +
149 +
150 +=== 2.3.2 Flash SD card to device's eMMC ===
151 +
152 +
153 +1. Open the device's enclosure, and put the SD card into the SD card slot
154 +1. After the device is powered on, use the serial port or gateway ip address to access the CLI of the gateway.
155 +1. Login and run the below command to flash.
156 +
157 +
158 +//The following are two methods for accessing the gateway CLI~://
159 +
160 +
161 +* **Method1. Use the serial port USB to access the gateway CLI**
162 +
163 +For more information about how to access gateway using  serial USB, see this link:
164 +
165 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H6.HowuserscanaccessLPS8-V2usingserialUSB>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H6.HowuserscanaccessLPS8-V2usingserialUSB]]
166 +
167 +
168 +* **Method2. Use the IP address to access the gateway CLI**
169 +
170 +Users can access the gateway CLI via the SSH protocol. Make sure your PC and the gateway are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
171 +
172 +
173 +IP address:  IP address of gateway or **Fallback IP**(172.31.255.254)
174 +
175 +Port:  22
176 +
177 +User Name:      (% style="color:blue" %)**root**
178 +
179 +Password:         (% style="color:blue" %)**dragino**(%%) (default)
180 +
181 +//After logging in, you will be in the gateway CLI and can enter commands as shown below.//
182 +
183 +
184 +[[image:image-20230508155357-1.png||height="225" width="634"]]
185 +
186 +
187 +**Run command:**
188 +
189 +(% style="background-color:yellow; color:green" %)**nand-sata-install**
190 +
191 +
192 +[[image:image-20220602112051-1.png]]
193 +
194 +
195 +
196 +Select the (% style="color:red" %)**"Boot from eMMC - system on eMMC".**
197 +
198 +[[image:image-20220602112058-2.png||height="292" width="646"]]
199 +
200 +
201 +[[image:image-20220602112106-3.png||height="301" width="643"]]
202 +
203 +
204 +
205 +Select the (% style="color:red" %)**"1  ext4"**
206 +
207 +[[image:image-20220602112113-4.png||height="271" width="642"]]
208 +
209 +
210 +
211 +It takes 4-5 minutes to burn from SD card to eMMC
212 +
213 +[[image:image-20220602112119-5.png||height="309" width="641"]]
214 +
215 +
216 +[[image:image-20220602112125-6.png||height="281" width="640"]]
217 +
218 +
219 +[[image:image-20220602112131-7.png||height="241" width="638"]]
220 +
221 +
222 +(% style="color:red" %)**Note: After the flash is complete, power off the device and then remove the SD card.**
223 +
224 +
225 +== 2.4 Default Built Version ==
226 +
227 +
228 +[[image:image-20220902155621-1.png]]
229 +
230 +
231 +== 2.5 How to upgrade the nodejs version to the latest. ==
232 +
233 +
234 +By default, the nodejs uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
235 +
236 +[[image:image-20221112145029-2.png]]
237 +
238 +**If you want to upgrade the nodejs to the latest, please follow to use these commands on the gateway CIL.**
239 +
240 +
241 +#install n, which is an Interactively Manage Your Node.js Versions
242 +
243 +[[image:image-20221112154230-3.png||height="89" width="689"]]
244 +
34 34  (% class="box infomessage" %)
35 35  (((
36 -sudo apt install -y libsqlite3-dev
37 -sudo apt install -y libftdi1-dev
247 +**npm install -g n**
38 38  )))
39 39  
40 40  
41 -(% style="color:red" %)**Run command clone dragino-fwd package:**
251 +#Install the latest LTS Node.js release (downloading if necessary)
42 42  
253 +[[image:image-20221112154418-4.png||height="184" width="893"]]
254 +
43 43  (% class="box infomessage" %)
44 44  (((
45 -git clone https:~/~/github.com/dragino/dragino_fwd_src.git
257 +**n lts**
46 46  )))
47 47  
48 -[[image:image-20220527151010-1.png]]
49 49  
261 +#Remove all downloaded versions except the installed version
50 50  
263 +[[image:image-20221112154456-5.png||height="139" width="899"]]
51 51  
52 -=== (% style="color:blue" %)**Step 2. Compile dragino_fwd**(%%) ===
265 +(% class="box infomessage" %)
266 +(((
267 +**n prune**
268 +)))
53 53  
54 54  
55 -(% style="color:red" %)**After cloning is complete, Run the command starts compiling:**
271 +(% class="box infomessage" %)
272 +(((
273 +**apt remove nodejs -y && apt autoremove -y && reboot**
274 +)))
56 56  
276 +
277 +Check the current version
278 +
279 +[[image:image-20221112154724-6.png]]
280 +
57 57  (% class="box infomessage" %)
58 58  (((
59 -Compile HP0C/HP0A fwd：  ./hp0z-make-deb.sh c
283 +**node -v**
60 60  )))
61 61  
62 -The following example compilers HP0C fwd.
63 63  
64 -[[image:image-20220527153913-3.png]]
287 +== 2.6 How to install Grafana and influxdb ==
65 65  
66 66  
67 -**When the compilation is complete a draginofwd-*.deb package is generated.**
290 +=== **Grafana:** ===
68 68  
69 -[[image:image-20220527154311-4.png||height="385" width="773"]]
70 70  
293 +(% class="box infomessage" %)
294 +(((
295 +curl https:~/~/packages.grafana.com/gpg.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/grafana-archive-keyrings.gpg >/dev/null
296 +echo "deb [signed-by=/usr/share/keyrings/grafana-archive-keyrings.gpg] https:~/~/packages.grafana.com/oss/deb stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
297 +apt update && apt install grafana
298 +)))
71 71  
72 72  
73 -=== (% style="color:blue" %)**Step 3. Install the dragino_fwd**(%%) ===
301 +Check the running status:
74 74  
75 75  
76 -(% style="color:red" %)**Run command:**
304 +(% class="box infomessage" %)
305 +(((
306 +systemctl status grafana-server
307 +)))
77 77  
309 +
310 +configuration path:
311 +
312 +
78 78  (% class="box infomessage" %)
79 79  (((
80 -dpkg -i draginofwd-*.deb
315 +/etc/grafana/grafana.ini
81 81  )))
82 82  
83 -[[image:image-20220527154811-5.png]]
84 84  
319 +=== **Influxdb:** ===
85 85  
86 86  
87 -=== (% style="color:blue" %)**Step 4. Test**(%%) ===
322 +(% class="box infomessage" %)
323 +(((
324 +curl https:~/~/repos.influxdata.com/influxdb.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/influxdb-archive-keyring.gpg >/dev/null
325 +echo "deb [signed-by=/usr/share/keyrings/influxdb-archive-keyring.gpg] https:~/~/repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
326 +apt update && apt install influxdb
327 +)))
88 88  
89 89  
90 -Check the dragino_fwd log:
330 +Check the running status:
91 91  
332 +
92 92  (% class="box infomessage" %)
93 93  (((
94 -journalctl -u draginofwd -f
335 +systemctl status influxdb
95 95  )))
96 96  
97 -[[image:image-20220527165221-7.png||height="182" width="931"]]
98 98  
339 +configuration path:
99 99  
100 -Start/stop dragino_fwd via systemctl:
101 101  
102 102  (% class="box infomessage" %)
103 103  (((
104 -systemctl start draginofwd
105 -systemctl stop draginofwd
344 +/etc/influxdb/influxdb.conf
106 106  )))
107 107  
108 108  
348 += 3.  Package Management =
109 109  
110 -== 2.2  How to clone Complete OS on the EMMC to SD card ==
350 +== 3.1 Default Package Maintain System ==
111 111  
352 +=== 3.1.1  How Package-Auto-Update works? ===
112 112  
113 113  
114 -== 2.3  How to flash SD card to (eMMC) device's built-in Memory ==
355 +By default, LPS8v2 / MS20 series products have an auto-update feature for main packages. The device will connect to Dragino's auto-update server and check for updates. 
115 115  
116 116  
117 -=== 2.3.1 Prepare an SD card with OS. ===
358 +(% style="color:blue" %)**When devices will check for updates**?
118 118  
119 - //**Preparations:**//
360 +* Devices will check for updates for every boot.
361 +* Devices will check for updates on every day midnight.
120 120  
121 -~1. Prepare an SD card and a// card reader device//
363 +(% style="color:blue" %)**What packages will be checked for updates**?
122 122  
123 -2. Formatting the SD card (//Make sure the SD card is empty//)
365 +dragino-httpd ~-~- Main Web UI http configuration
124 124  
125 -3. //Download the OS image from **[[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]**: ( File format **dragino-lps8v2-1.7.img** )//
367 +dragino-sid  ~-~- SN write and read tool
126 126  
127 -4. //A Flash software tool ( Such as v1.7.9 from **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
369 +dragino-ui  ~-~- Gateway Web UI package
128 128  
371 +draginofwd   ~-~- UDP packet forwarder, LoRa Base Station
129 129  
130 -=== 2.3.2 Flash SD card to device's eMMC. ===
373 +draginoups   ~-~- Miscellaneous between different versions
131 131  
132 -//1. Open the device's enclosure, and put the SD card into the SD card slot//
133 133  
134 -//2. Power on the device and access the gateway's CLI via the serial port.//
135 135  
136 -//3. Login and run the below command to flash.//
377 +(% style="color:blue" %)**Location and changelog for packages**:
137 137  
379 +* Location: http:~/~/repo.dragino.com/release/tool/
380 +* Changelog: [[http:~~/~~/repo.dragino.com/release/tool/Readme_HP0.txt>>http://repo.dragino.com/release/tool/Readme_HP0.txt]]
138 138  
139 -(% style="color:red" %)**Run command:**
382 +(% style="color:blue" %)**How to view auto-updated log**
140 140  
141 -(% class="box infomessage" %)
142 -(((
143 -nand-sata-install
144 -)))
384 +You can view the log on the page of (% style="color:#037691" %)**System ~-~-> Package Management.**
145 145  
146 -[[image:image-20220602112051-1.png]]
147 147  
387 +[[image:1661305025451-220.png]]
148 148  
149 -Select the "Boot from eMMC - system on eMMC"
150 150  
151 -[[image:image-20220602112058-2.png||height="292" width="646"]]
152 152  
153 -[[image:image-20220602112106-3.png||height="301" width="643"]]
391 +(% style="color:blue" %)**Can I disable package-auto-update?**
154 154  
393 +You can check the checkbox and click the(% style="color:red" %)** ‘SAVE’ **(%%)button to enable or disable the auto-update.
155 155  
156 -Select the "1  ext4"
157 157  
158 -[[image:image-20220602112113-4.png||height="271" width="642"]]
396 +[[image:1661305258501-636.png]]
159 159  
160 160  
161 -It takes 4-5 minutes to burn from SD card to eMMC
399 +=== 3.1.2 How to manually update core packages? ===
162 162  
163 -[[image:image-20220602112119-5.png||height="309" width="641"]]
164 164  
165 -[[image:image-20220602112125-6.png||height="281" width="640"]]
402 +You can click the (% style="color:red" %)**‘Manual Update’**(%%) to update the dragino's packages.
166 166  
167 -[[image:image-20220602112131-7.png||height="241" width="638"]]
168 168  
405 +[[image:1661305328295-218.png]]
169 169  
170 -(% style="color:red" %)**Note: After the flash is complete, power off the device and then remove the SD card.**
171 171  
408 +=== 3.1.3 How to manually update other packages? ===
172 172  
173 -= 3. Package Maintain Note =
174 174  
411 +For the other packages, you have to access the device's CLI to do it via the apt command.
412 +
413 +
414 +== 3.2 Set up a 3^^rd^^ party package maintain server ==
415 +
416 +=== 3.2.1 Overview ===
417 +
418 +
419 +Customers can use their own package maintenance system instead of using the default one from Dragino. They need to set up a package maintenance system for Debian. Lots of instructions are available in Internet, below is a reference instruction.
420 +
421 +
422 +=== 3.2.2 Install Apache2 HTTP server ===
423 +
424 +
425 +(% style="background-color:yellow; color:green" %)**apt install apache2**
426 +
427 +
428 +=== 3.2.3 Creating Package Directories ===
429 +
430 +
431 +**~ (% style="background-color:yellow; color:green" %)cd /var/www/html/(%%)**
432 +
433 +**~ (% style="background-color:yellow; color:green" %)mkdir debian/release/dists/stable/main/binary-armhf/ -p(%%)**
434 +
435 +**~ (% style="background-color:yellow; color:green" %)mkdir debian/release/pool/main/d/dragino/ -p(%%)**
436 +
437 +
438 +**Tree Structure:**
439 +
440 +(% style="color:red" %)**Note: If you are not familiar with updating servers, most directory names are not recommended to be changed.**
441 +
442 +
443 +└── debian
444 +
445 + └── release
446 +
447 + ├── dists
448 +
449 + │   └── stable
450 +
451 + │       └── main
452 +
453 + │           └── binary-armhf
454 +
455 + └── pool
456 +
457 + └── main
458 +
459 + └── d
460 +
461 + └── dragino   ~-~-> (% style="background-color:yellow; color:green" %)**This is the directory to store the packages. User can change it to other name.**
462 +
463 +
464 +=== 3.2.4 Get deb packages ===
465 +
466 +
467 +The deb packages for auto-update can be placed in** (% style="color:blue" %)/var/www/html/debian/release/pool/main/d/dragino/(%%)**
468 +
469 +Below is an example package(testing-0808.deb) for test purpose:
470 +
471 +
472 +**~ (% style="background-color:yellow; color:green" %)wget http:~/~/repo.dragino.com/release/tool/unimportant/testing-0808.deb(%%)**
473 +
474 +**~ (% style="background-color:yellow; color:green" %)cp ./testing-0808.deb /var/www/html/debian/release/pool/main/d/dragino/(%%)**
475 +
476 +
477 +=== 3.2.5 Generate Package Index file ===
478 +
479 +
480 +(% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/**
481 +
482 +(% style="background-color:yellow; color:green" %)**dpkg-scanpackages pool/ > dists/stable/main/binary-armhf/Packages**
483 +
484 +(% style="background-color:yellow; color:green" %)**cat dists/stable/main/binary-armhf/Packages | gzip -9 > dists/stable/main/binary-armhf/Packages.gz**
485 +
486 +
487 +(% style="color:red" %)**Note: Every time a package has been update, above comments need to be executed in the server to get the up-to-date package list.**
488 +
489 +
490 +=== 3.2.6 Generate Release file ===
491 +
492 +
493 +==== (% style="color:blue" %)**Create the generated script:**(%%) ====
494 +
495 +
496 +(% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/dists/stable**
497 +
498 +
499 +(% style="background-color:yellow; color:green" %)**wget [[http:~~/~~/repo.dragino.com/release/tool/unimportant/generate-release.sh>>url:http://repo.dragino.com/release/tool/unimportant/generate-release.sh]]**
500 +
501 +(% style="background-color:yellow; color:green" %)**chmod + x ./generate-release.sh**
502 +
503 +(% style="background-color:yellow; color:green" %)**./generate-release.sh > Release**
504 +
505 +
506 +=== 3.2.7 Sign the Release file with gpg and generating Inrelease file ===
507 +
508 +
509 +==== (% style="color:blue" %)**Make sure auto-update server has gnupg**(%%) ====
510 +
511 +
512 +(% style="background-color:yellow; color:green" %)**apt install gnupg**
513 +
514 +
515 +
516 +==== (% style="color:blue" %)**generate gpg key**(%%) ====
517 +
518 +
519 +(% style="background-color:yellow; color:green" %)**gpg -gen-key**
520 +
521 +
522 +(% style="color:red" %)**Note: Fill in the content as required and remember the name and email address.**
523 +
524 +
525 +
526 +==== (% style="color:blue" %)**Check the gen-key**(%%) ====
527 +
528 +
529 +(% style="background-color:yellow; color:green" %)**gen -list-key**
530 +
531 +
532 +
533 +==== (% style="color:blue" %)**Generate the release.gpg**(%%) ====
534 +
535 +
536 +(% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/dists/stable**
537 +
538 +(% style="background-color:yellow; color:green" %)**gpg ~-~-armor ~-~-detach-sign -o Release.gpg Release**
539 +
540 +
541 +(% style="background-color:yellow; color:green" %)**gpg ~-~-clearsign -o InRelease Release**
542 +
543 +
544 +
545 +==== (% style="color:blue" %)**Generate the public key**(%%) ====
546 +
547 +
548 +(% style="background-color:yellow; color:green" %)**gpg ~-~-armor ~-~-output <name>.asc ~-~-export <email address>**
549 +
550 +
551 +**example: gpg ~-~-armor ~-~-output xiao.asc ~-~-export **[[xiaoye@dragino.cc>>mailto:xiaoye@dragino.cc]]
552 +
553 +
554 +
555 +=== 3.2.8 Add url as apt source in LPS8v2 / MS20 ===
556 +
557 +
558 +
559 +==== (% style="color:blue" %)**Add the public key**(%%) ====
560 +
561 +
562 +(% style="background-color:yellow; color:green" %)**cp xiao.asc /etc/apt/trusted.gpg.d/**
563 +
564 +
565 +(% style="color:red" %)**Note: First need to transfer the public key from auto-update server to device.**
566 +
567 +
568 +
569 +==== (% style="color:blue" %)**Add the apt source list**(%%) ====
570 +
571 +
572 +Add the apt source list url and name this as test_server.list
573 +
574 +(% style="background-color:yellow; color:green" %)**echo "deb http:~/~/<IP_address or hostname>/debian/release stable main" | tee /etc/apt/sources.list.d/test_server.list**
575 +
576 +
577 +
578 +==== (% style="color:blue" %)**Validate the apt repository**(%%) ====
579 +
580 +
581 +Get and install the testing package (download testing-0808.deb and test)
582 +
583 +(% style="background-color:yellow; color:green" %)**apt update && apt install testing**
584 +
585 +
586 +Example output:
587 +
588 +[[image:1661306420449-569.png]]
589 +
590 +
591 +=== 3.2.9 Configure the gateway's auto-upgrade rules ===
592 +
593 +
594 +==== (% style="color:blue" %)**Remove dragino apt source**(%%) ====
595 +
596 +
597 +(% style="background-color:yellow; color:green" %)**/etc/apt/sources.list**
598 +
599 +
600 +[[image:1661306460134-112.png]]
601 +
602 +
603 +
604 +==== (% style="color:blue" %)**Set up automatic updates**(%%) ====
605 +
606 +
607 +(% style="background-color:yellow; color:green" %)**Path : /usr/lib/dragino/dragino-apt-updates**
608 +
609 +
610 +The device performs automatic updates from this script,
611 +
612 +But it will now only look for dragino as a keyword, so you need to replace the keyword dragino with your own keyword.
613 +
614 +
615 +[[image:1661306487761-768.png]]
616 +
617 +
175 175  
1661306420449-569.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +237.0 KB
Content
1661306460134-112.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +146.8 KB
Content
1661306487761-768.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +291.9 KB
Content
image-20220902155621-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +27.7 KB
Content
image-20221112145017-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 KB
Content
image-20221112145029-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +3.3 KB
Content
image-20221112154230-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +5.2 KB
Content
image-20221112154418-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +18.2 KB
Content
image-20221112154456-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +14.6 KB
Content
image-20221112154724-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoye
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 KB
Content
image-20230327152105-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +27.5 KB
Content
image-20230327152431-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +47.5 KB
Content
image-20230327154700-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +26.7 KB
Content
image-20230327165836-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +17.1 KB
Content
image-20230327171824-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +46.1 KB
Content
image-20230327174537-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +8.8 KB
Content
image-20230327174556-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +16.0 KB
Content
image-20230327174853-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20230508155357-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Kilight
Size
... ... @@ -1,0 +1,1 @@
1 +24.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0