Changes for page Armbian OS instruction

Last modified by Edwin Chen on 2025/02/26 08:18
<
From version < 107.1 >
edited by Kilight Cao
on 2023/08/31 15:20
To version < 95.1 >
edited by Kilight Cao
on 2023/03/27 17:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -93,332 +93,330 @@
93 93  
94 94  == 2.2  How to clone Complete OS on the EMMC to SD card ==
95 95  
96 +== 2.3  How to flash SD card to (eMMC) device's built-in Memory ==
96 96  
98 +=== 2.3.1 Prepare an SD card with OS ===
97 97  
98 98  
101 + (% style="background-color:yellow" %)//**Preparations:**//
99 99  
103 +~1. Prepare an SD card and a// card reader device//
100 100  
105 +2. Formatting the SD card (//Make sure the SD card is empty//)
101 101  
107 +3. //Download the OS image from the **[[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]**: ( File format **dragino-lps8v2-1.7.img** )//
102 102  
109 +4. //A Flash software tool ( Such as v1.7.9 from **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
103 103  
104 104  
105 105  
113 +=== 2.3.2 Flash SD card to device's eMMC ===
106 106  
107 107  
116 +//1. Open the device's enclosure, and put the SD card into the SD card slot//
108 108  
118 +//2. Power on the device and access the gateway's CLI via the serial port.//
109 109  
120 +//3. Login and run the below command to flash.//
110 110  
111 -== 2.3  How to flash a new image(OS) to the gateway(LPS8V2) ==
112 112  
123 +**Run command:**
113 113  
114 -Since the gateway has a large system, you need to use the sd card to reflash the system for the gateway
125 +(% style="background-color:yellow; color:green" %)**nand-sata-install**
115 115  
116 116  
117 -//2.3.1: Making an SD card with the new image//
128 +[[image:image-20220602112051-1.png]]
118 118  
119 -//2.3.2: Instal the SD card to the gateway//
120 120  
121 -//2.3.3: Flash the image to the gateway's built memory from the SD card//
122 122  
123 -//2.3.4: Finished the process of flash and power cycle the gateway//
132 +Select the (% style="color:red" %)**"Boot from eMMC - system on eMMC".**
124 124  
134 +[[image:image-20220602112058-2.png||height="292" width="646"]]
125 125  
126 -==== (% style="background-color:yellow" %)**//Preparations~://**(%%) ====
127 127  
128 -1. Prepare an SD card
129 -1. Prepare a card reader device
130 -1. Download the OS image from the [[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]: ( File format dragino-lps8v2-1.7.img )
131 -1. A Flash software tool ( Such as v1.7.9 from [[balenaEtcher>>url:https://www.balena.io/etcher/]] )
132 -1. SD Card [[format>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]] tool
137 +[[image:image-20220602112106-3.png||height="301" width="643"]]
133 133  
134 -=== **2.3.1 Making an SD Card with the new image** ===
135 135  
136 136  
137 -==== Step 1.  Formatting the SD Card ====
141 +Select the (% style="color:red" %)**"1  ext4"**
138 138  
139 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609111027-9.png?rev=1.1||alt="image-20220609111027-9.png" height="318" width="292"]]
143 +[[image:image-20220602112113-4.png||height="271" width="642"]]
140 140  
141 141  
142 -==== Step 2. Select the OS image ====
143 143  
144 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104907-8.png?rev=1.1||alt="image-20220609104907-8.png" height="435" width="689"]]
147 +It takes 4-5 minutes to burn from SD card to eMMC
145 145  
149 +[[image:image-20220602112119-5.png||height="309" width="641"]]
146 146  
147 -==== Step 3. Select the target ====
148 148  
149 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104637-2.png?rev=1.1||alt="image-20220609104637-2.png" height="436" width="690"]]
152 +[[image:image-20220602112125-6.png||height="281" width="640"]]
150 150  
151 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104701-3.png?rev=1.1||alt="image-20220609104701-3.png" height="436" width="690"]]
152 152  
155 +[[image:image-20220602112131-7.png||height="241" width="638"]]
153 153  
154 -==== Step 4. Flash start ====
155 155  
156 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104727-4.png?rev=1.1||alt="image-20220609104727-4.png" height="435" width="689"]]
158 +(% style="color:red" %)**Note: After the flash is complete, power off the device and then remove the SD card.**
157 157  
158 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104741-5.png?rev=1.1||alt="image-20220609104741-5.png" height="434" width="687"]]
159 159  
161 +== 2.4 Default Built Version ==
160 160  
161 161  
162 -=== **2.3.2 Instal the SD card to the gateway** ===
164 +[[image:image-20220902155621-1.png]]
163 163  
164 -1. Open the device's enclosure, and put the SD card into the SD card slot
165 165  
166 -[[image:image-20230712201032-1.png]]
167 +== 2.5 How to upgrade the nodejs version to the latest. ==
167 167  
168 168  
169 -2. Power the gateway with 5V2A, and access the gateway's Ethernet port to your PC
170 +By default, the nodejs uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
170 170  
171 -[[image:image-20230712201458-3.png||height="649" width="832"]]
172 +[[image:image-20221112145029-2.png]]
172 172  
174 +**If you want to upgrade the nodejs to the latest, please follow to use these commands on the gateway CIL.**
173 173  
174 -Note: The PWR LED on red
175 175  
176 - The  LAN LED blink
177 +#install n, which is an Interactively Manage Your Node.js Versions
177 177  
178 - The SYS LED on red
179 +[[image:image-20221112154230-3.png||height="89" width="689"]]
179 179  
181 +(% class="box infomessage" %)
182 +(((
183 +**npm install -g n**
184 +)))
180 180  
181 181  
182 -=== **3.2.3 Flash the image to the gateway's built memory from the SD card** ===
187 +#Install the latest LTS Node.js release (downloading if necessary)
183 183  
189 +[[image:image-20221112154418-4.png||height="184" width="893"]]
184 184  
185 -Access the gateway Linux CLI to flash the image to the gateway's built memory
191 +(% class="box infomessage" %)
192 +(((
193 +**n lts**
194 +)))
186 186  
187 187  
188 -* **Use the IP address to access the gateway CLI**
197 +#Remove all downloaded versions except the installed version
189 189  
190 -Users can access the gateway CLI via the SSH protocol. Make sure your PC and the gateway are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
199 +[[image:image-20221112154456-5.png||height="139" width="899"]]
191 191  
201 +(% class="box infomessage" %)
202 +(((
203 +**n prune**
204 +)))
192 192  
193 -IP address:  IP address of gateway or **Fallback IP**(172.31.255.254)
194 194  
195 -Port:  22
207 +(% class="box infomessage" %)
208 +(((
209 +**apt remove nodejs -y && apt autoremove -y && reboot**
210 +)))
196 196  
197 -User Name:      (% style="color:blue" %)**root**
198 198  
199 -Password:         (% style="color:blue" %)**dragino**(%%) (default)
213 +Check the current version
200 200  
201 -//After logging in, you will be in the gateway CLI and can enter commands as shown below.//
215 +[[image:image-20221112154724-6.png]]
202 202  
217 +(% class="box infomessage" %)
218 +(((
219 +**node -v**
220 +)))
203 203  
204 -[[image:image-20230508155357-1.png||height="225" width="634"]]
205 205  
223 +== 2.6 How to install Grafana and influxdb ==
206 206  
207 -**Run command:**
208 208  
209 -(% style="background-color:yellow; color:green" %)**nand-sata-install**
226 +=== **Grafana:** ===
210 210  
211 211  
212 -[[image:image-20220602112051-1.png]]
229 +(% class="box infomessage" %)
230 +(((
231 +curl https:~/~/packages.grafana.com/gpg.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/grafana-archive-keyrings.gpg >/dev/null
232 +echo "deb [signed-by=/usr/share/keyrings/grafana-archive-keyrings.gpg] https:~/~/packages.grafana.com/oss/deb stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
233 +apt update && apt install grafana
234 +)))
213 213  
214 214  
237 +Check the running status:
215 215  
216 -Select the (% style="color:red" %)**"Boot from eMMC - system on eMMC".**
217 217  
218 -[[image:image-20220602112058-2.png||height="292" width="646"]]
240 +(% class="box infomessage" %)
241 +(((
242 +systemctl status grafana-server
243 +)))
219 219  
220 220  
221 -[[image:image-20220602112106-3.png||height="301" width="643"]]
246 +configuration path:
222 222  
223 223  
249 +(% class="box infomessage" %)
250 +(((
251 +/etc/grafana/grafana.ini
252 +)))
224 224  
225 -Select the (% style="color:red" %)**"1  ext4"**
226 226  
227 -[[image:image-20220602112113-4.png||height="271" width="642"]]
255 +=== **Influxdb:** ===
228 228  
229 229  
230 -
231 -It takes 4-5 minutes to burn from SD card to eMMC
232 -
233 -[[image:image-20220602112119-5.png||height="309" width="641"]]
234 -
235 -
236 -[[image:image-20220602112125-6.png||height="281" width="640"]]
237 -
238 -
239 -[[image:image-20220602112131-7.png||height="241" width="638"]]
240 -
241 -
242 -(% style="color:red" %)**Note: After the flash is complete, power off the device and then remove the SD card.**
243 -
244 -
245 -== 2.4 How to extend the gateway size of memory with SD card ==
246 -
247 -
248 -Users can use the SD card slot to expand the gateway memory size by following the steps below
249 -
250 -
251 -=== 2.4.1 View SD card information ===
252 -
253 253  (% class="box infomessage" %)
254 254  (((
255 -fdisk -l
260 +curl https:~/~/repos.influxdata.com/influxdb.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/influxdb-archive-keyring.gpg >/dev/null
261 +echo "deb [signed-by=/usr/share/keyrings/influxdb-archive-keyring.gpg] https:~/~/repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
262 +apt update && apt install influxdb
256 256  )))
257 257  
258 -[[image:image-20230831150518-3.png]]
259 259  
266 +Check the running status:
260 260  
261 -=== 2.4.2 Displays the current file system disk usage statistics on Linux systems ===
262 262  
263 -
264 264  (% class="box infomessage" %)
265 265  (((
266 -df -h
271 +systemctl status influxdb
267 267  )))
268 268  
269 -[[image:image-20230831150341-2.png]]
270 270  
275 +configuration path:
271 271  
272 -=== 2.4.3 Mount SD card ===
273 273  
274 -
275 275  (% class="box infomessage" %)
276 276  (((
277 -mkdir /mnt/sd
278 -
279 -mount /dev/mmcblk0p1 /mnt/sd
280 +/etc/influxdb/influxdb.conf
280 280  )))
281 281  
282 -After the mount is successful to check the file system disk usage on the Linux system again:
283 283  
284 -[[image:image-20230831151432-4.png]]
284 +== 2.7 How to install BACnet ==
285 285  
286 286  
287 -If the mount fails, you can format the file system and try the mount again
288 -
289 289  (% class="box infomessage" %)
290 290  (((
291 -mkfs.ext4 /dev/mmcblk0p1
289 +wget [[http:~~/~~/dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb>>url:http://dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb]]
290 +dpkg -i dragino-bacnet-apps-hp0c-2023-03-01.deb
292 292  )))
293 293  
294 -== 2.5 Default Built Version ==
293 +[[image:image-20230327152105-1.png||height="163" width="933"]]
295 295  
296 296  
297 -[[image:image-20220902155621-1.png]]
296 +=== 2.7.1 Configure BACnet ===
298 298  
299 299  
300 -== 2.6 How to upgrade the nodejs version to the latest. ==
299 +After BACnet is installed, run commands to modify BACnet configurations
301 301  
301 +Note: device_port and bacnet_ip_port are not set to the same
302 302  
303 -By default, the nodejs uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
304 -
305 -[[image:image-20221112145029-2.png]]
306 -
307 -**If you want to upgrade the nodejs to the latest, please follow to use these commands on the gateway CIL.**
308 -
309 -
310 -#install n, which is an Interactively Manage Your Node.js Versions
311 -
312 -[[image:image-20221112154230-3.png||height="89" width="689"]]
313 -
314 314  (% class="box infomessage" %)
315 315  (((
316 -**npm install -g n**
305 +nano /etc/config/bacnet
317 317  )))
318 318  
308 +Examples:
319 319  
320 -#Install the latest LTS Node.js release (downloading if necessary)
321 -
322 -[[image:image-20221112154418-4.png||height="184" width="893"]]
323 -
324 324  (% class="box infomessage" %)
325 325  (((
326 -**n lts**
312 +config settings 'general'
313 + option bacnet_ip '10.130.2.80'  #The IP address of the BACnetIP network, here basically the same IP as the bbmd address below
314 + option bacnet_ip_port '47808'  #As with bbmd_port, the purpose of this is to register a Bacnet Server application as a bbmd registration server
315 + option bbmd_address '10.130.2.80'  #bbmd is the BACnet registration server. Only one bbmd server is required in the same ip network
316 + option bbmd_port '47808'  #In general, 47808 is used as the default port
317 + option bacnet_dev_count '2'  #Here is the number of BACnet devices that need to be simulated, if the number is 2, then the following settings must have 2, which are bacdev_1, bacdev_2
318 +
319 +config settings 'bacdev_1'
320 + option device_name 'LHT65N-1'  #The identification name of the bacnet device
321 + option device_id '10001'  #The unique identification code in the same network segment of BACnet,Scope is(1 - 4194302)
322 + option device_port '47912'  #The IP port occupied by Bacnet when it starts, Scope is (1024 - 65535)
323 +
324 +config settings 'bacdev_2'
325 + option device_name 'LHT65N-2'
326 + option device_id '10002'
327 + option device_port '47913'  
327 327  )))
328 328  
329 329  
330 -#Remove all downloaded versions except the installed version
331 +=== 2.7.2 Run BACnet ===
331 331  
332 -[[image:image-20221112154456-5.png||height="139" width="899"]]
333 333  
334 +After the configuration is complete, run the following command to start BACnet, The following are two ways to run BACnet:
335 +
336 +(1)With /etc/config/bacnet configuration, and to run the registration server on the current machine, start it with the following command (configure the /etc/config/bacnet file correctly):
337 +
334 334  (% class="box infomessage" %)
335 335  (((
336 -**n prune**
340 +bacserver -c -s
337 337  )))
338 338  
343 +(2)Without /etc/config/bacnet, and to run the registration server on the current machine, start it with the following command:
339 339  
340 340  (% class="box infomessage" %)
341 341  (((
342 -**apt remove nodejs -y && apt autoremove -y && reboot**
347 +bacserver -s -a 10.130.2.80 -p 47808
343 343  )))
344 344  
350 +This command simulates two devices, with device IDs 47910 and 47911
345 345  
346 -Check the current version
352 +Enter bacserver -h to output help
347 347  
348 -[[image:image-20221112154724-6.png]]
349 -
350 350  (% class="box infomessage" %)
351 351  (((
352 -**node -v**
356 +bacserver -h
353 353  )))
354 354  
359 +[[image:image-20230327154700-3.png]]
355 355  
356 -== 2.7 How to install Grafana and influxdb ==
357 357  
362 +=== 2.7.3 Read devices and modify devices ===
358 358  
359 -=== **Grafana:** ===
360 360  
365 +Enter baccli -h to output help
361 361  
362 362  (% class="box infomessage" %)
363 363  (((
364 -curl https:~/~/packages.grafana.com/gpg.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/grafana-archive-keyrings.gpg >/dev/null
365 -echo "deb [signed-by=/usr/share/keyrings/grafana-archive-keyrings.gpg] https:~/~/packages.grafana.com/oss/deb stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
366 -apt update && apt install grafana
369 +baccli -h
367 367  )))
368 368  
372 +[[image:image-20230327165836-1.png]]
369 369  
370 -Check the running status:
374 +Examples:
371 371  
376 +(1)List the current Bacnet devices:
372 372  
373 373  (% class="box infomessage" %)
374 374  (((
375 -systemctl status grafana-server
380 +baccli -l -a
376 376  )))
377 377  
383 +[[image:image-20230327174537-3.png]]
378 378  
379 -configuration path:
385 +(2)List device information based on device ID:
380 380  
381 -
382 382  (% class="box infomessage" %)
383 383  (((
384 -/etc/grafana/grafana.ini
389 +baccli -l -i id
385 385  )))
386 386  
392 +[[image:image-20230327174556-4.png]]
387 387  
388 -=== **Influxdb:** ===
394 +(3)List the device details by device ID:
389 389  
390 -
391 391  (% class="box infomessage" %)
392 392  (((
393 -curl https:~/~/repos.influxdata.com/influxdb.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/influxdb-archive-keyring.gpg >/dev/null
394 -echo "deb [signed-by=/usr/share/keyrings/influxdb-archive-keyring.gpg] https:~/~/repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
395 -apt update && apt install influxdb
398 +baccli -l -v -i id
396 396  )))
397 397  
401 +(4) Modify the specified attribute value based on the device ID:
398 398  
399 -Check the running status:
400 -
401 -
402 402  (% class="box infomessage" %)
403 403  (((
404 -systemctl status influxdb
405 +baccli -i id -p prop -w value
405 405  )))
406 406  
408 +[[image:image-20230327174853-5.png]]
407 407  
408 -configuration path:
409 409  
411 +The user can check the data of the device by using the **[[yabe BACnet tool>>https://sourceforge.net/projects/yetanotherbacnetexplorer/]]**
410 410  
411 -(% class="box infomessage" %)
412 -(((
413 -/etc/influxdb/influxdb.conf
414 -)))
413 +[[image:image-20230327171824-2.png]]
415 415  
415 += 3. Package Maintain Note =
416 416  
417 -= 3.  Package Management =
418 -
419 419  == 3.1 Default Package Maintain System ==
420 420  
421 -=== 3.1.1  How Package-Auto-Update works? ===
419 +=== 3.1.1 How Package-Auto-Update works? ===
422 422  
423 423  
424 424  By default, LPS8v2 / MS20 series products have an auto-update feature for main packages. The device will connect to Dragino's auto-update server and check for updates. 
... ... @@ -682,6 +682,3 @@
682 682  
683 683  
684 684  [[image:1661306487761-768.png]]
685 -
686 -
687 -
image-20230508155357-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.3 KB
Content
image-20230712201032-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -872.4 KB
Content
image-20230712201424-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -872.4 KB
Content
image-20230712201458-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -854.1 KB
Content
image-20230831144800-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -86.9 KB
Content
image-20230831150341-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -30.7 KB
Content
image-20230831150518-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -89.9 KB
Content
image-20230831151432-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -37.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0