Changes for page Armbian OS instruction

Last modified by Edwin Chen on 2025/02/26 08:18
<
From version < 102.1 >
edited by Xiaoye
on 2023/07/12 20:25
To version < 96.1 >
edited by Kilight Cao
on 2023/05/08 15:53
>
Change comment: Uploaded new attachment "image-20230508155357-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -93,118 +93,33 @@
93 93  
94 94  == 2.2  How to clone Complete OS on the EMMC to SD card ==
95 95  
96 +== 2.3  How to flash SD card to (eMMC) device's built-in Memory ==
96 96  
98 +=== 2.3.1 Prepare an SD card with OS ===
97 97  
98 98  
101 + (% style="background-color:yellow" %)//**Preparations:**//
99 99  
103 +~1. Prepare an SD card and a// card reader device//
100 100  
105 +2. Formatting the SD card (//Make sure the SD card is empty//)
101 101  
107 +3. //Download the OS image from the **[[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]**: ( File format **dragino-lps8v2-1.7.img** )//
102 102  
109 +4. //A Flash software tool ( Such as v1.7.9 from **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
103 103  
104 104  
105 105  
113 +=== 2.3.2 Flash SD card to device's eMMC ===
106 106  
107 107  
116 +//1. Open the device's enclosure, and put the SD card into the SD card slot//
108 108  
118 +//2. Power on the device and access the gateway's CLI via the serial port.//
109 109  
120 +//3. Login and run the below command to flash.//
110 110  
111 -== 2.3  How to flash a new image(OS) to the gateway(LPS8V2) ==
112 112  
113 -
114 -Since the gateway has a large system, you need to use the sd card to reflash the system for the gateway
115 -
116 -
117 -//2.3.1: Making an SD card with the new image//
118 -
119 -//2.3.2: Instal the SD card to the gateway//
120 -
121 -//2.3.3: Flash the image to the gateway's built memory from the SD card//
122 -
123 -//2.3.4: Finished the process of flash and power cycle the gateway//
124 -
125 -
126 -==== (% style="background-color:yellow" %)**//Preparations~://**(%%) ====
127 -
128 -1. Prepare an SD card
129 -1. Prepare a card reader device
130 -1. Download the OS image from the [[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]: ( File format dragino-lps8v2-1.7.img )
131 -1. A Flash software tool ( Such as v1.7.9 from [[balenaEtcher>>url:https://www.balena.io/etcher/]] )
132 -1. SD Card [[format>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]] tool
133 -
134 -
135 -=== **2.3.1 Making an SD Card with the new image** ===
136 -
137 -
138 -==== Step 1.  Formatting the SD Card ====
139 -
140 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609111027-9.png?rev=1.1||alt="image-20220609111027-9.png" height="318" width="292"]]
141 -
142 -
143 -==== Step 2. Select the OS image ====
144 -
145 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104907-8.png?rev=1.1||alt="image-20220609104907-8.png" height="435" width="689"]]
146 -
147 -
148 -==== Step 3. Select the target ====
149 -
150 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104637-2.png?rev=1.1||alt="image-20220609104637-2.png" height="436" width="690"]]
151 -
152 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104701-3.png?rev=1.1||alt="image-20220609104701-3.png" height="436" width="690"]]
153 -
154 -
155 -==== Step 4. Flash start ====
156 -
157 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104727-4.png?rev=1.1||alt="image-20220609104727-4.png" height="435" width="689"]]
158 -
159 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104741-5.png?rev=1.1||alt="image-20220609104741-5.png" height="434" width="687"]]
160 -
161 -
162 -
163 -=== **2.3.2 Instal the SD card to the gateway** ===
164 -
165 -1. Open the device's enclosure, and put the SD card into the SD card slot
166 -
167 -[[image:image-20230712201032-1.png]]
168 -
169 -
170 -2. Power the gateway with 5V2A, and access the gateway's Ethernet port to your PC
171 -
172 -[[image:image-20230712201458-3.png||height="649" width="832"]]
173 -
174 -
175 -Note: The PWR LED on red
176 -
177 - The  LAN LED blink
178 -
179 - The SYS LED on red
180 -
181 -
182 -
183 -=== **3.2.3 Flash the image to the gateway's built memory from the SD card** ===
184 -
185 -
186 -Access the gateway Linux CLI to flash the image to the gateway's built memory
187 -
188 -
189 -* **Use the IP address to access the gateway CLI**
190 -
191 -Users can access the gateway CLI via the SSH protocol. Make sure your PC and the gateway are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
192 -
193 -
194 -IP address:  IP address of gateway or **Fallback IP**(172.31.255.254)
195 -
196 -Port:  22
197 -
198 -User Name:      (% style="color:blue" %)**root**
199 -
200 -Password:         (% style="color:blue" %)**dragino**(%%) (default)
201 -
202 -//After logging in, you will be in the gateway CLI and can enter commands as shown below.//
203 -
204 -
205 -[[image:image-20230508155357-1.png||height="225" width="634"]]
206 -
207 -
208 208  **Run command:**
209 209  
210 210  (% style="background-color:yellow; color:green" %)**nand-sata-install**
... ... @@ -366,6 +366,143 @@
366 366  )))
367 367  
368 368  
284 +== 2.7 How to install BACnet ==
285 +
286 +
287 +(% class="box infomessage" %)
288 +(((
289 +wget [[http:~~/~~/dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb>>url:http://dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb]]
290 +dpkg -i dragino-bacnet-apps-hp0c-2023-03-01.deb
291 +)))
292 +
293 +[[image:image-20230327152105-1.png||height="163" width="933"]]
294 +
295 +
296 +=== 2.7.1 Configure BACnet ===
297 +
298 +
299 +After BACnet is installed, run commands to modify BACnet configurations
300 +
301 +(% style="color:red" %)**Note: device_port and bacnet_ip_port are not set to the same**
302 +
303 +(% class="box infomessage" %)
304 +(((
305 +nano /etc/config/bacnet
306 +)))
307 +
308 +**Examples:**
309 +
310 +(% class="box infomessage" %)
311 +(((
312 +config settings 'general'
313 + option bacnet_ip '10.130.2.80'  #The IP address of the BACnetIP network, here basically the same IP as the bbmd address below
314 + option bacnet_ip_port '47808'  #As with bbmd_port, the purpose of this is to register a Bacnet Server application as a bbmd registration server
315 + option bbmd_address '10.130.2.80'  #bbmd is the BACnet registration server. Only one bbmd server is required in the same ip network
316 + option bbmd_port '47808'  #In general, 47808 is used as the default port
317 + option bacnet_dev_count '2'  #Here is the number of BACnet devices that need to be simulated, if the number is 2, then the following settings must have 2, which are bacdev_1, bacdev_2
318 +
319 +config settings 'bacdev_1'
320 + option device_name 'LHT65N-1'  #The identification name of the bacnet device
321 + option device_id '10001'  #The unique identification code in the same network segment of BACnet,Scope is(1 - 4194302)
322 + option device_port '47912'  #The IP port occupied by Bacnet when it starts, Scope is (1024 - 65535)
323 +
324 +config settings 'bacdev_2'
325 + option device_name 'LHT65N-2'
326 + option device_id '10002'
327 + option device_port '47913'  
328 +)))
329 +
330 +
331 +=== 2.7.2 Run BACnet ===
332 +
333 +
334 +After the configuration is complete, run the following command to start BACnet, The following are two ways to run BACnet:
335 +
336 +(1) With /etc/config/bacnet configuration, and to run the registration server on the current machine, start it with the following command (configure the /etc/config/bacnet file correctly):
337 +
338 +(% class="box infomessage" %)
339 +(((
340 +bacserver -c -s
341 +)))
342 +
343 +
344 +(2) Without /etc/config/bacnet, and to run the registration server on the current machine, start it with the following command:
345 +
346 +(% class="box infomessage" %)
347 +(((
348 +bacserver -s -a 10.130.2.80 -p 47808
349 +)))
350 +
351 +This command simulates two devices, with device IDs 47910 and 47911
352 +
353 +Enter bacserver -h to output help
354 +
355 +(% class="box infomessage" %)
356 +(((
357 +bacserver -h
358 +)))
359 +
360 +[[image:image-20230327154700-3.png]]
361 +
362 +
363 +=== 2.7.3 Read devices and modify devices ===
364 +
365 +
366 +Enter baccli -h to output help
367 +
368 +(% class="box infomessage" %)
369 +(((
370 +baccli -h
371 +)))
372 +
373 +[[image:image-20230327165836-1.png]]
374 +
375 +
376 +**Examples:**
377 +
378 +(1) List the current Bacnet devices:
379 +
380 +(% class="box infomessage" %)
381 +(((
382 +baccli -l -a
383 +)))
384 +
385 +[[image:image-20230327174537-3.png]]
386 +
387 +
388 +(2) List device information based on device ID:
389 +
390 +(% class="box infomessage" %)
391 +(((
392 +baccli -l -i id
393 +)))
394 +
395 +[[image:image-20230327174556-4.png]]
396 +
397 +
398 +(3) List the device details by device ID:
399 +
400 +(% class="box infomessage" %)
401 +(((
402 +baccli -l -v -i id
403 +)))
404 +
405 +
406 +(4) Modify the specified attribute value based on the device ID:
407 +
408 +(% class="box infomessage" %)
409 +(((
410 +baccli -i id -p prop -w value
411 +)))
412 +
413 +[[image:image-20230327174853-5.png]]
414 +
415 +
416 +The user can check the data of the device by using the **[[yabe BACnet tool>>https://sourceforge.net/projects/yetanotherbacnetexplorer/]]**
417 +
418 +[[image:image-20230327171824-2.png]]
419 +
420 +
369 369  = 3.  Package Management =
370 370  
371 371  == 3.1 Default Package Maintain System ==
image-20230712201032-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -872.4 KB
Content
image-20230712201424-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -872.4 KB
Content
image-20230712201458-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -854.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0