Changes for page Armbian OS instruction

Last modified by Edwin Chen on 2025/02/26 08:18
<
From version < 102.1 >
edited by Xiaoye
on 2023/07/12 20:25
To version < 94.1 >
edited by Kilight Cao
on 2023/03/27 17:48
>
Change comment: Uploaded new attachment "image-20230327174853-5.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoye
1 +XWiki.Kilight
Content
... ... @@ -93,118 +93,33 @@
93 93  
94 94  == 2.2  How to clone Complete OS on the EMMC to SD card ==
95 95  
96 +== 2.3  How to flash SD card to (eMMC) device's built-in Memory ==
96 96  
98 +=== 2.3.1 Prepare an SD card with OS ===
97 97  
98 98  
101 + (% style="background-color:yellow" %)//**Preparations:**//
99 99  
103 +~1. Prepare an SD card and a// card reader device//
100 100  
105 +2. Formatting the SD card (//Make sure the SD card is empty//)
101 101  
107 +3. //Download the OS image from the **[[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]**: ( File format **dragino-lps8v2-1.7.img** )//
102 102  
109 +4. //A Flash software tool ( Such as v1.7.9 from **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )//
103 103  
104 104  
105 105  
113 +=== 2.3.2 Flash SD card to device's eMMC ===
106 106  
107 107  
116 +//1. Open the device's enclosure, and put the SD card into the SD card slot//
108 108  
118 +//2. Power on the device and access the gateway's CLI via the serial port.//
109 109  
120 +//3. Login and run the below command to flash.//
110 110  
111 -== 2.3  How to flash a new image(OS) to the gateway(LPS8V2) ==
112 112  
113 -
114 -Since the gateway has a large system, you need to use the sd card to reflash the system for the gateway
115 -
116 -
117 -//2.3.1: Making an SD card with the new image//
118 -
119 -//2.3.2: Instal the SD card to the gateway//
120 -
121 -//2.3.3: Flash the image to the gateway's built memory from the SD card//
122 -
123 -//2.3.4: Finished the process of flash and power cycle the gateway//
124 -
125 -
126 -==== (% style="background-color:yellow" %)**//Preparations~://**(%%) ====
127 -
128 -1. Prepare an SD card
129 -1. Prepare a card reader device
130 -1. Download the OS image from the [[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]: ( File format dragino-lps8v2-1.7.img )
131 -1. A Flash software tool ( Such as v1.7.9 from [[balenaEtcher>>url:https://www.balena.io/etcher/]] )
132 -1. SD Card [[format>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]] tool
133 -
134 -
135 -=== **2.3.1 Making an SD Card with the new image** ===
136 -
137 -
138 -==== Step 1.  Formatting the SD Card ====
139 -
140 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609111027-9.png?rev=1.1||alt="image-20220609111027-9.png" height="318" width="292"]]
141 -
142 -
143 -==== Step 2. Select the OS image ====
144 -
145 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104907-8.png?rev=1.1||alt="image-20220609104907-8.png" height="435" width="689"]]
146 -
147 -
148 -==== Step 3. Select the target ====
149 -
150 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104637-2.png?rev=1.1||alt="image-20220609104637-2.png" height="436" width="690"]]
151 -
152 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104701-3.png?rev=1.1||alt="image-20220609104701-3.png" height="436" width="690"]]
153 -
154 -
155 -==== Step 4. Flash start ====
156 -
157 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104727-4.png?rev=1.1||alt="image-20220609104727-4.png" height="435" width="689"]]
158 -
159 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104741-5.png?rev=1.1||alt="image-20220609104741-5.png" height="434" width="687"]]
160 -
161 -
162 -
163 -=== **2.3.2 Instal the SD card to the gateway** ===
164 -
165 -1. Open the device's enclosure, and put the SD card into the SD card slot
166 -
167 -[[image:image-20230712201032-1.png]]
168 -
169 -
170 -2. Power the gateway with 5V2A, and access the gateway's Ethernet port to your PC
171 -
172 -[[image:image-20230712201458-3.png||height="649" width="832"]]
173 -
174 -
175 -Note: The PWR LED on red
176 -
177 - The  LAN LED blink
178 -
179 - The SYS LED on red
180 -
181 -
182 -
183 -=== **3.2.3 Flash the image to the gateway's built memory from the SD card** ===
184 -
185 -
186 -Access the gateway Linux CLI to flash the image to the gateway's built memory
187 -
188 -
189 -* **Use the IP address to access the gateway CLI**
190 -
191 -Users can access the gateway CLI via the SSH protocol. Make sure your PC and the gateway are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.
192 -
193 -
194 -IP address:  IP address of gateway or **Fallback IP**(172.31.255.254)
195 -
196 -Port:  22
197 -
198 -User Name:      (% style="color:blue" %)**root**
199 -
200 -Password:         (% style="color:blue" %)**dragino**(%%) (default)
201 -
202 -//After logging in, you will be in the gateway CLI and can enter commands as shown below.//
203 -
204 -
205 -[[image:image-20230508155357-1.png||height="225" width="634"]]
206 -
207 -
208 208  **Run command:**
209 209  
210 210  (% style="background-color:yellow; color:green" %)**nand-sata-install**
... ... @@ -366,13 +366,106 @@
366 366  )))
367 367  
368 368  
369 -= 3.  Package Management =
284 +== 2.7 How to install BACnet ==
370 370  
371 -== 3.1 Default Package Maintain System ==
372 372  
373 -=== 3.1.1  How Package-Auto-Update works? ===
287 +(% class="box infomessage" %)
288 +(((
289 +wget [[http:~~/~~/dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb>>url:http://dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb]]
290 +dpkg -i dragino-bacnet-apps-hp0c-2023-03-01.deb
291 +)))
374 374  
293 +[[image:image-20230327152105-1.png||height="163" width="933"]]
375 375  
295 +
296 +=== 2.7.1 Configure BACnet ===
297 +
298 +
299 +After BACnet is installed, run commands to modify BACnet configurations
300 +
301 +Note: device_port and bacnet_ip_port are not set to the same
302 +
303 +(% class="box infomessage" %)
304 +(((
305 +nano /etc/config/bacnet
306 +)))
307 +
308 +Examples:
309 +
310 +(% class="box infomessage" %)
311 +(((
312 +config settings 'general'
313 + option bacnet_ip '10.130.2.80'  #The IP address of the BACnetIP network, here basically the same IP as the bbmd address below
314 + option bacnet_ip_port '47808'  #As with bbmd_port, the purpose of this is to register a Bacnet Server application as a bbmd registration server
315 + option bbmd_address '10.130.2.80'  #bbmd is the BACnet registration server. Only one bbmd server is required in the same ip network
316 + option bbmd_port '47808'  #In general, 47808 is used as the default port
317 + option bacnet_dev_count '2'  #Here is the number of BACnet devices that need to be simulated, if the number is 2, then the following settings must have 2, which are bacdev_1, bacdev_2
318 +
319 +config settings 'bacdev_1'
320 + option device_name 'LHT65N-1'  #The identification name of the bacnet device
321 + option device_id '10001'  #The unique identification code in the same network segment of BACnet,Scope is(1 - 4194302)
322 + option device_port '47912'  #The IP port occupied by Bacnet when it starts, Scope is (1024 - 65535)
323 +
324 +config settings 'bacdev_2'
325 + option device_name 'LHT65N-2'
326 + option device_id '10002'
327 + option device_port '47913'  
328 +)))
329 +
330 +
331 +=== 2.7.2 Run BACnet ===
332 +
333 +
334 +After the configuration is complete, run the following command to start BACnet, The following are two ways to run BACnet:
335 +
336 +(1)With /etc/config/bacnet configuration, and to run the registration server on the current machine, start it with the following command (configure the /etc/config/bacnet file correctly):
337 +
338 +(% class="box infomessage" %)
339 +(((
340 +bacserver -c -s
341 +)))
342 +
343 +(2)Without /etc/config/bacnet, and to run the registration server on the current machine, start it with the following command:
344 +
345 +(% class="box infomessage" %)
346 +(((
347 +bacserver -s -a 10.130.2.80 -p 47808
348 +)))
349 +
350 +This command simulates two devices, with device IDs 47910 and 47911
351 +
352 +Enter bacserver -h to output help
353 +
354 +(% class="box infomessage" %)
355 +(((
356 +bacserver -h
357 +)))
358 +
359 +[[image:image-20230327154700-3.png]]
360 +
361 +
362 +=== 2.7.3 Read devices and modify devices ===
363 +
364 +
365 +Enter baccli -h to output help
366 +
367 +(% class="box infomessage" %)
368 +(((
369 +baccli -h
370 +)))
371 +
372 +[[image:image-20230327165836-1.png]]
373 +
374 +Examples:
375 +
376 +
377 += 4. Package Maintain Note =
378 +
379 +== 4.1 Default Package Maintain System ==
380 +
381 +=== 4.1.1 How Package-Auto-Update works? ===
382 +
383 +
376 376  By default, LPS8v2 / MS20 series products have an auto-update feature for main packages. The device will connect to Dragino's auto-update server and check for updates. 
377 377  
378 378  
... ... @@ -417,7 +417,7 @@
417 417  [[image:1661305258501-636.png]]
418 418  
419 419  
420 -=== 3.1.2 How to manually update core packages? ===
428 +=== 4.1.2 How to manually update core packages? ===
421 421  
422 422  
423 423  You can click the (% style="color:red" %)**‘Manual Update’**(%%) to update the dragino's packages.
... ... @@ -426,27 +426,27 @@
426 426  [[image:1661305328295-218.png]]
427 427  
428 428  
429 -=== 3.1.3 How to manually update other packages? ===
437 +=== 4.1.3 How to manually update other packages? ===
430 430  
431 431  
432 432  For the other packages, you have to access the device's CLI to do it via the apt command.
433 433  
434 434  
435 -== 3.2 Set up a 3^^rd^^ party package maintain server ==
443 +== 4.2 Set up a 3^^rd^^ party package maintain server ==
436 436  
437 -=== 3.2.1 Overview ===
445 +=== 4.2.1 Overview ===
438 438  
439 439  
440 440  Customers can use their own package maintenance system instead of using the default one from Dragino. They need to set up a package maintenance system for Debian. Lots of instructions are available in Internet, below is a reference instruction.
441 441  
442 442  
443 -=== 3.2.2 Install Apache2 HTTP server ===
451 +=== 4.2.2 Install Apache2 HTTP server ===
444 444  
445 445  
446 446  (% style="background-color:yellow; color:green" %)**apt install apache2**
447 447  
448 448  
449 -=== 3.2.3 Creating Package Directories ===
457 +=== 4.2.3 Creating Package Directories ===
450 450  
451 451  
452 452  **~ (% style="background-color:yellow; color:green" %)cd /var/www/html/(%%)**
... ... @@ -482,7 +482,7 @@
482 482   └── dragino   ~-~-> (% style="background-color:yellow; color:green" %)**This is the directory to store the packages. User can change it to other name.**
483 483  
484 484  
485 -=== 3.2.4 Get deb packages ===
493 +=== 4.2.4 Get deb packages ===
486 486  
487 487  
488 488  The deb packages for auto-update can be placed in** (% style="color:blue" %)/var/www/html/debian/release/pool/main/d/dragino/(%%)**
... ... @@ -495,7 +495,7 @@
495 495  **~ (% style="background-color:yellow; color:green" %)cp ./testing-0808.deb /var/www/html/debian/release/pool/main/d/dragino/(%%)**
496 496  
497 497  
498 -=== 3.2.5 Generate Package Index file ===
506 +=== 4.2.5 Generate Package Index file ===
499 499  
500 500  
501 501  (% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/**
... ... @@ -508,7 +508,7 @@
508 508  (% style="color:red" %)**Note: Every time a package has been update, above comments need to be executed in the server to get the up-to-date package list.**
509 509  
510 510  
511 -=== 3.2.6 Generate Release file ===
519 +=== 4.2.6 Generate Release file ===
512 512  
513 513  
514 514  ==== (% style="color:blue" %)**Create the generated script:**(%%) ====
... ... @@ -524,7 +524,7 @@
524 524  (% style="background-color:yellow; color:green" %)**./generate-release.sh > Release**
525 525  
526 526  
527 -=== 3.2.7 Sign the Release file with gpg and generating Inrelease file ===
535 +=== 4.2.7 Sign the Release file with gpg and generating Inrelease file ===
528 528  
529 529  
530 530  ==== (% style="color:blue" %)**Make sure auto-update server has gnupg**(%%) ====
... ... @@ -573,7 +573,7 @@
573 573  
574 574  
575 575  
576 -=== 3.2.8 Add url as apt source in LPS8v2 / MS20 ===
584 +=== 4.2.8 Add url as apt source in LPS8v2 / MS20 ===
577 577  
578 578  
579 579  
... ... @@ -609,7 +609,7 @@
609 609  [[image:1661306420449-569.png]]
610 610  
611 611  
612 -=== 3.2.9 Configure the gateway's auto-upgrade rules ===
620 +=== 4.2.9 Configure the gateway's auto-upgrade rules ===
613 613  
614 614  
615 615  ==== (% style="color:blue" %)**Remove dragino apt source**(%%) ====
... ... @@ -634,6 +634,3 @@
634 634  
635 635  
636 636  [[image:1661306487761-768.png]]
637 -
638 -
639 -
image-20230508155357-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -24.3 KB
Content
image-20230712201032-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -872.4 KB
Content
image-20230712201424-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -872.4 KB
Content
image-20230712201458-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoye
Size
... ... @@ -1,1 +1,0 @@
1 -854.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0