Version 57.2 by Edwin Chen on 2022/06/19 08:27
Hide last authors
Edwin Chen 1.1 1 {{box cssClass="floatinginfobox" title="**Contents**"}}
2 {{toc/}}
3 {{/box}}
4
Edwin Chen 5.1 5
6 [[image:image-20220530000243-1.png||height="332" width="531"]]
7
8
Edwin Chen 1.1 9 = Introduction =
10
Edwin Chen 8.1 11 == What is GroPoint Air ==
Edwin Chen 7.1 12
Edwin Chen 2.1 13 The Dragino GroPoint is a (% style="color:blue" %)**LoRaWAN Multi Soil Segment Converter**(%%) for IoT of Agriculture. It is designed to connect to [[GroPoint Profile Multi-depth Soil moisture and temperature profile Sensor>>url:https://www.gropoint.com/products/soil-sensors/gropoint-profile]] and get GroPoint Profile’s reading and send it to IoT server via LoRaWAN wireless network.
Edwin Chen 1.1 14
Edwin Chen 3.1 15 (% style="color:blue" %)**GroPoint Profile is plug-and-play with GroPoint Air**(%%) to get soil moisture and send via wireless. GroPoint Profile is powered by GroPoint Air, (% style="color:blue" %)**no need external power source**(%%).
Edwin Chen 1.1 16
17 The LoRa wireless technology used in GroPoint Air allows devices to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
18
19 GroPoint Air is powered by (% style="color:blue" %)**an 8500mAh Li-SOCI2 battery**(%%), it is designed for long-term use for up to 5 years.
20
21 Each GroPoint Air is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to the local LoRaWAN server and it will auto-connect after power on.
22
Edwin Chen 11.1 23 [[image:image-20220530002019-2.png||height="295" width="655"]]
Edwin Chen 1.1 24
25
Edwin Chen 11.1 26 == Features ==
Edwin Chen 1.1 27
28
Edwin Chen 11.1 29 * LoRaWAN 1.0.3 Class A
30 * Ultra-low power consumption
31 * Supports GroPoint Profile
32 * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
33 * AT Commands to change parameters
34 * Uplink on periodically
35 * Downlink to change configure
36 * IP66 Waterproof Enclosure
37 * 8500mAh Battery for long term use
Edwin Chen 1.1 38
Edwin Chen 11.1 39 == Probe Specification ==
Edwin Chen 1.1 40
Edwin Chen 11.1 41 GroPoint Air includes an M12 5-pin connector, the pins definition matches GroPoint Profile M12 version probes. Users can connect this connector to GroPoint Profile directly.
Edwin Chen 1.1 42
Edwin Chen 12.1 43 GroPoint Profile includes a series of multi-depth soil moisture and temperature sensors. The specification for GroPoint Profile can be found here: [[https:~~/~~/www.gropoint.com/products/soil-sensors/gropoint-profile>>https://www.gropoint.com/products/soil-sensors/gropoint-profile]]
Edwin Chen 1.1 44
45
Edwin Chen 12.1 46 == Applications ==
47
Edwin Chen 11.1 48 * Smart Agriculture
Edwin Chen 1.1 49
Edwin Chen 11.1 50 == Pin Mapping ==
51
52 Inner PCB Pin mapping for reference:
53
54 [[image:image-20220530002453-3.png||height="262" width="493"]]
55
56
Edwin Chen 40.1 57 = Connect LoRaWAN Network =
Edwin Chen 39.1 58
59
David Huang 41.1 60 == LED Indicator ==
Edwin Chen 36.1 61
Edwin Chen 38.1 62 The GroPoint Air has an internal LED which can show the status of different states.
63
64 * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
65 * Blink once when device transmits a packet.
66
David Huang 42.1 67 == Firmware and Changelog ==
Edwin Chen 36.1 68
David Huang 41.1 69 Firmware Download Location: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/GroPoint_Air/firmware/>>https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/GroPoint_Air/firmware/]]
Edwin Chen 36.1 70
71 Change Log:
72
73
Edwin Chen 57.2 74 = How to use? =
Edwin Chen 36.1 75
Edwin Chen 57.2 76 (% class="wikigeneratedid" %)
77 == Connect to GroPoint Profile ==
David Huang 42.1 78
Edwin Chen 57.2 79 GroPoint Air must be used with [[GroPoint Profile>>https://www.gropoint.com/products/soil-sensors/gropoint-profile]]. There are different interface model from GroPoint, users need to choose the one:
80
81 * Support RS485 Interface
82 * with M12 5pin connector.
83
84 Such model in GroPoint Profile is: **2625-N-T-x-M-M **(Where x is different depending on how many levels it detects).
85
86
87 == Connect to LoRaWAN Network? ==
88
David Huang 42.1 89 Each GroPoint Air is shipped with a worldwide unique set of OTAA keys. To use GroPoint Air in a LoRaWAN network, user needs to input the OTAA keys in the LoRaWAN network server. So GroPoint Air can join the LoRaWAN network and start to transmit sensor data
90
91
Edwin Chen 56.1 92 == Example to use for LoRaWAN network ==
David Huang 42.1 93
94 This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are similar.
95
96 * In this use case, the GroPoint Air measures soil moisture and temperature and sends the status to the LoRaWAN server.The GroPoint Air will uplink different types of messages to the LoRaWAN server. See [[Uplink payload>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/#H2.3UplinkPayload]] for detail.
97
98 Assume the DLOS8 is already set to connect to the [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the GroPoint Air device in TTN V3:
99
100 **Step 1**: Create a device in TTN V3 with the OTAA keys from GroPoint Air.
101
102 Each GroPoint Air is shipped with a sticker with the default device EUI as below:
103
104
105 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652944593868-618.png?rev=1.1||alt="1652944593868-618.png"]]
106
107 Users can enter these keys in the LoRaWAN Server portal. Below is the TTN V3 screenshot:
108
109 Add APP EUI in the application.
110
111 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-1.png?rev=1.1||alt="image-20220519151704-1.png"]]
112
113 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-2.png?width=717&height=322&rev=1.1||alt="image-20220519151704-2.png" height="322" width="717"]]
114
115 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-3.png?rev=1.1||alt="image-20220519151704-3.png"]]
116
117 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519151704-4.png?rev=1.1||alt="image-20220519151704-4.png"]]
118
119 Add APP KEY and DEV EUI
120
121 **Step 2**: Power on GroPoint Air
122
123 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/image-20220519094347-1.png?width=725&height=430&rev=1.1||alt="image-20220519094347-1.png" height="430" width="725"]]
124
125 Put the jumper to power on GroPoint Air and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and the user can see it in the panel.
126
David Huang 44.1 127 [[image:image-20220611174943-1.png||height="139" width="1008"]]
David Huang 42.1 128
David Huang 44.1 129
David Huang 42.1 130 === Decoder in TTN V3 ===
131
132 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SW3L%20LoRaWAN%20Outdoor%20Flow%20Sensor/WebHome/1652927365661-475.png?width=723&height=359&rev=1.1||alt="1652927365661-475.png" height="359" width="723"]]
133
Edwin Chen 55.2 134 Please check the decoder [gropoint_Decoder_V1.0.0.js] from this link:
David Huang 42.1 135
Edwin Chen 55.2 136 [[https:~~/~~/www.dropbox.com/sh/4strg6w7kkekdc4/AAAUKdAV3XKhOi3t6YjA8j9za?dl=0>>https://www.dropbox.com/sh/4strg6w7kkekdc4/AAAUKdAV3XKhOi3t6YjA8j9za?dl=0]]
David Huang 42.1 137
138
Edwin Chen 56.2 139 == Uplink Payload Analyze ==
140
141
142
143
Edwin Chen 55.3 144 == Show data on Datacake ==
David Huang 42.1 145
146 Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
147
148 **Step 1**: Link TTNv3 to Datacake [[https:~~/~~/docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti>>url:https://docs.datacake.de/lorawan/lns/thethingsindustries#create-integration-on-tti]]
149
150 **Step 2**: Configure SW3L in Datacake  ​​​​
151
David Huang 52.1 152 [[image:image-20220613171007-1.png||height="567" width="542"]]
David Huang 42.1 153
David Huang 52.1 154 [[image:image-20220613171015-2.png||height="600" width="586"]]
David Huang 42.1 155
David Huang 52.1 156 [[image:image-20220613171029-3.png||height="507" width="513"]]
David Huang 42.1 157
David Huang 52.1 158 [[image:image-20220613171038-4.png||height="469" width="786"]]
David Huang 42.1 159
David Huang 52.1 160 [[image:image-20220613171105-5.png||height="533" width="949"]]
David Huang 42.1 161
David Huang 52.1 162 [[image:image-20220613171117-6.png||height="501" width="925"]]
David Huang 42.1 163
David Huang 52.1 164 [[image:image-20220613171124-7.png||height="466" width="877"]]
David Huang 42.1 165
166
167
Edwin Chen 32.1 168 = Configure GroPoint Air via AT Command or LoRaWAN Downlink =
169
170 Use can configure GroPoint Air via AT Command or LoRaWAN Downlink.
171
Edwin Chen 33.1 172 * AT Command Connection: See [[FAQ>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/#H6.FAQ]].
173 * LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>url:http://8.211.40.43/xwiki/bin/view/Main/]]
Edwin Chen 32.1 174
Edwin Chen 34.1 175 There are two kinds of commands to configure GroPoint Air, they are:
Edwin Chen 32.1 176
177 * (((
178 **~ General Commands**.
179 )))
180
181 These commands are to configure:
182
Edwin Chen 35.1 183 * General system settings like: uplink interval.
184 * LoRaWAN protocol & radio-related command.
Edwin Chen 32.1 185
186 They are the same for all Dragino Device that support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>url:http://8.211.40.43/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
187
188
189 * (((
Edwin Chen 34.1 190 **~ Commands special design for GroPoint Air**
Edwin Chen 32.1 191 )))
192
Edwin Chen 34.1 193 These commands only valid for GroPoint Air, as below:
Edwin Chen 32.1 194
195 == 3.1 Set Transmit Interval Time ==
196
197 Feature: Change LoRaWAN End Node Transmit Interval.
198
199 **AT Command: AT+TDC**
200
201 [[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/image-20220607171554-8.png?rev=1.1||alt="image-20220607171554-8.png"]]
202
203 **Downlink Command: 0x01**
204
205 Format: Command Code (0x01) followed by 3 bytes time value.
206
207 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
208
Edwin Chen 35.1 209 * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
210 * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
Edwin Chen 32.1 211
David Huang 42.1 212 == 3.2 Set Interrupt Mode ==
Edwin Chen 32.1 213
214 Feature, Set Interrupt mode for GPIO_EXIT.
215
216 **AT Command: AT+INTMOD**
217
218 [[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/image-20220607171716-9.png?rev=1.1||alt="image-20220607171716-9.png"]]
219
220 **Downlink Command: 0x06**
221
222 Format: Command Code (0x06) followed by 3 bytes.
223
224 This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
225
Edwin Chen 35.1 226 * Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
227 * Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
Edwin Chen 32.1 228
David Huang 54.1 229 == (% id="cke_bm_55968S" style="display:none" %) (%%)3.3 Set the sensor delay time ==
Edwin Chen 32.1 230
David Huang 54.1 231 Feature: Change the sensor delay time.
232
David Huang 55.1 233 The default delay is 1000ms.
234
David Huang 54.1 235 **AT Command: AT+SDELAY**
236
237 [[image:image-20220613175511-8.png]]
238
239 **Downlink Command: 0xA1**
240
241 Format: Command Code (0xA1) followed by 3 bytes time value.
242
243 If the downlink payload=A10007D0, it means set the sensor delay time to 0x0007D0=2000ms, while type code is A1.
244
245 * Example 1: Downlink Payload: A10003E8 ~/~/ Set the sensor delay time = 1000ms
246 * Example 2: Downlink Payload: A10007D0 ~/~/ Set the sensor delay time = 2000ms
247
248 == 3.4 Get Firmware Version Info ==
249
Edwin Chen 32.1 250 Feature: use downlink to get firmware version.
251
252 **Downlink Command: 0x26**
253
254 [[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/image-20220607171917-10.png?rev=1.1||alt="image-20220607171917-10.png"]]
255
256 * Reply to the confirmation package: 26 01
257 * Reply to non-confirmed packet: 26 00
258
259 Device will send an uplink after got this downlink command. With below payload:
260
261 Configures info payload:
262
263 |=(((
264 **Size(bytes)**
David Huang 41.1 265 )))|=**1**|=**1**|=**1**|=**2**|=**1**|=4|=**1**
Edwin Chen 32.1 266 |**Value**|Software Type|(((
267 Frequency
268
269 Band
270 )))|Sub-band|(((
271 Firmware
272
273 Version
274 )))|Sensor Type|Reserve|(((
275 [[Message Type>>url:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/#H2.3.6MessageType]]
276 Always 0x02
277 )))
278
279 **Software Type**: Always 0x03 for LLMS01
280
281 **Frequency Band**:
282
283 *0x01: EU868
284
285 *0x02: US915
286
287 *0x03: IN865
288
289 *0x04: AU915
290
291 *0x05: KZ865
292
293 *0x06: RU864
294
295 *0x07: AS923
296
297 *0x08: AS923-1
298
299 *0x09: AS923-2
300
David Huang 41.1 301 *0x0A: AS923-3
Edwin Chen 32.1 302
David Huang 41.1 303 *0x0B: AS923-4
304
Edwin Chen 32.1 305 **Sub-Band**: value 0x00 ~~ 0x08
306
307 **Firmware Version**: 0x0100, Means: v1.0.0 version
308
309 **Sensor Type**:
310
311 0x01: LSE01
312
313 0x02: LDDS75
314
315 0x03: LDDS20
316
317 0x04: LLMS01
318
319 0x05: LSPH01
320
321 0x06: LSNPK01
322
David Huang 41.1 323 0x07: LDDS45
Edwin Chen 32.1 324
David Huang 41.1 325 0x08: LSLP01
Edwin Chen 32.1 326
Edwin Chen 25.1 327 = Use AT Command =
Edwin Chen 11.1 328
Edwin Chen 25.1 329 == Access AT Commands ==
330
331 GroPoint Air supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to GroPoint Air for using AT command, as below.
332
Edwin Chen 27.1 333 [[image:Main.User Manual for LoRaWAN End Nodes.LLMS01-LoRaWAN Leaf Moisture Sensor User Manual.WebHome@1654593668970-604.png||height="297" width="474"]]
Edwin Chen 25.1 334
335 **Connection:**
336
337 (% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
338
339 (% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
340
341 (% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
342
343
344 In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for GroPoint Air. GroPoint Air will output system info once power on as below:
345
Edwin Chen 27.1 346 [[image:Main.User Manual for LoRaWAN End Nodes.LLMS01-LoRaWAN Leaf Moisture Sensor User Manual.WebHome@1654653659449-932.png||height="471" width="674"]]
Edwin Chen 25.1 347
348 Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLLMS01viaATCommandorLoRaWANDownlink"]].
349
350
Edwin Chen 28.1 351 = Battery & How to replace =
352
353 == Battery Type ==
354
355 GroPoint Air is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is an un-rechargeable battery with a low discharge rate targeting more than 5 years use. This type of battery is commonly used in IoT targets for long-term running, such as water meters.
356
357 The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
358
359
360 [[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/1654593587246-335.png?rev=1.1||alt="1654593587246-335.png" height="408" width="574"]]
361
362 Minimum Working Voltage for the GroPoint Air:
363
364 GroPoint Air:  2.45v ~~ 3.6v
365
366
367 == Power Consumption Analyze ==
368
369 Dragino Battery-powered products are all runs in Low Power mode. We have an updated battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit intervals.
370
371 Instruction to use as below:
372
373
374 **Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
375
376
377 **Step 2**: Open it and choose
378
379 * (((
380 Product Model
381 )))
382 * (((
383 Uplink Interval
384 )))
385 * (((
386 Working Mode
387 )))
388
Edwin Chen 31.1 389 And the Life expectation in different cases will be shown on the right.
Edwin Chen 28.1 390
391 [[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/1654593605679-189.png?rev=1.1||alt="1654593605679-189.png"]]
392
393 The battery-related documents as below:
394
395 * (((
396 [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
397 )))
398 * (((
399 [[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
400 )))
401 * (((
402 [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
403 )))
404
405 [[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LLMS01-LoRaWAN%20Leaf%20Moisture%20Sensor%20User%20Manual/WebHome/image-20220607172042-11.png?rev=1.1||alt="image-20220607172042-11.png"]]
406
407
Edwin Chen 29.1 408 === ​Battery Note ===
409
Edwin Chen 30.1 410 The Li-SICO battery is designed for small current / long period applications. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period to transmit LoRa, then the battery life may be decreased.
Edwin Chen 28.1 411
412
Edwin Chen 29.1 413 === Replace the battery ===
414
Edwin Chen 30.1 415 You can change the battery in GroPoint Air. The type of battery is not limited as long as the output is between 3v to 3.6v.
Edwin Chen 28.1 416
Edwin Chen 30.1 417 The default battery pack of GroPoint Air includes a ER26500 plus supercapacitor. If users can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most cases. The SPC can enlarge the battery life for high-frequency use (update period below 5 minutes)
Edwin Chen 28.1 418
419
420
421
Edwin Chen 18.1 422 = FAQ =
423
424 == How to change the LoRa Frequency Bands/Region ==
425
Edwin Chen 24.1 426 You can follow the instruction here: [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome||anchor="H2.HardwareUpgradeMethodSupportList"]].
427 When downloading the images, choose the required image file for download. ​
Edwin Chen 18.1 428
429
Edwin Chen 19.1 430 = Trouble Shooting =
Edwin Chen 18.1 431
Edwin Chen 19.1 432 == AT Commands input doesn’t work ==
Edwin Chen 18.1 433
434 In case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while pressing the send key, user need to add ENTER in their string.
435
436
437
Edwin Chen 11.1 438 = Order Info =
439
440 Part Number: **GROPOINT AIR-M-XX**
441
442 **XX**: The default frequency band
443
444 * **AS923**: LoRaWAN AS923 band
445 * **AU915**: LoRaWAN AU915 band
446 * **EU433**: LoRaWAN EU433 band
447 * **EU868**: LoRaWAN EU868 band
448 * **KR920**: LoRaWAN KR920 band
449 * **US915**: LoRaWAN US915 band
450 * **IN865**: LoRaWAN IN865 band
451 * **CN470**: LoRaWAN CN470 band
452
Edwin Chen 16.1 453 = ​Packing Info =
454
Edwin Chen 17.1 455 **Package Includes:  **
Edwin Chen 16.1 456
Edwin Chen 17.1 457 * GroPoint Air-M x 1
458
459 **Dimension and weight:**
460
461 * Device Size: cm
462 * Device Weight: g
463 * Package Size / pcs : cm
464 * Weight / pcs : g

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0