Last modified by Xiaoling on 2023/04/23 09:46
Show last authors
1 (% style="text-align:center" %)
2 [[image:image-20220620202334-2.png||height="467" width="809"]]
3
4
5 (((
6
7
8
9 )))
10
11 **Table of Contents：**
12
13 {{toc/}}
14
15
16
17
18
19 = 1. Introduction =
20
21 == 1.1 What is WGT-11 ==
22
23
24 (((
25 (((
26 The WGT-11 is an (% style="color:green" %)**open-source LoRaWAN Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
27 )))
28
29 (((
30 The WGT-11 is fully compatible with LoRaWAN protocol. It supports different kinds of LoRaWAN Network Connections such as: (% style="color:green" %)**Semtech UDP Packet Forwarder, LoRaWAN Basic Station, ChirpStack MQTT Bridge**(%%), and so on. This makes WGT-11 work with most LoRaWAN platforms in the market.
31 )))
32
33 (((
34 WGT-11 also includes a (% style="color:green" %)**built-in LoRaWAN Server and IoT server**(%%), which provide the possibility for the system integrator to deploy the IoT service without cloud service or 3rd servers.
35 )))
36
37 (((
38 Different countries use different LoRaWAN frequency bands. WGT-11 has these bands pre-configured. Users can also customize the frequency bands to use in their own LoRa network.
39 )))
40
41 (((
42 WGT-11 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
43 )))
44
45
46 == 1.2 Specifications ==
47
48
49 (% style="color:#037691" %)**Hardware System:**
50
51 * CPU: Quad-core Cortex-A7 1.2Ghz
52 * RAM: 512MB
53 * eMMC: 4GB
54
55 (% style="color:#037691" %)**Interface:**
56
57 * 10M/100M RJ45 Ports x 1
58 * Multi-Channel LoRaWAN Wireless
59 * WiFi 802.11 b/g/n
60 * Sensitivity: -140dBm
61 * Max Output Power: 27dBm
62
63 (% style="color:#037691" %)**Operating Condition:**
64
65 * Work Temperature: -20 ~~ 70°C
66 * Storage Temperature: -20 ~~ 70°C
67 * Power Input: 5V, 2A, DC
68
69
70
71 == 1.3 Features ==
72
73
74 * Open Source Debian system
75 * Managed by Web GUI, SSH via WAN or WiFi
76 * Remote Management
77 * Auto-provisioning for batch deployment and management
78 * LoRaWAN Gateway
79 * 10 programmable parallel demodulation paths
80 * Pre-configured to support different LoRaWAN regional settings.
81 * Allow customizing LoRaWAN regional parameters.
82 * Different kinds of LoRaWAN Connections such as
83 ** Semtech UDP Packet Forwarder
84 ** LoRaWAN Basic Station
85 ** ChirpStack-Gateway-Bridge (MQTT)
86 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
87 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
88
89
90
91 == 1.4 Block Diagram ==
92
93
94
95 == 1.5 LED Indicators ==
96
97
98 WGT-11 has totally four LEDs, They are:
99
100
101 (% style="color:blue" %)**➢ Power LED**(%%): This RED LED will be solid if the device is properly powered
102
103 (% style="color:blue" %)**➢ ETH LED**(%%):  This RGB LED will blink GREEN when the ETH port is connecting
104
105 (% style="color:blue" %)**➢ SYS LED**(%%):  This RGB LED will show different colors in different states:
106
107 ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.
108
109 ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together
110
111 ✓** SOLID RED:** Device doesn't have an Internet connection.
112
113 (% style="color:blue" %)**➢ WIFI LED**(%%): This LED shows the WIFI interface connection status.
114
115
116 == 1.6 Button Intruction ==
117
118
119 WGT-11 has a black toggle button, which is:
120
121
122 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
123
124 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
125
126
127 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
128
129 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
130
131
132 = 2. Quick Start =
133
134
135 The WGT-11 supports network access via Ethernet or Wi-Fi connection and runs without a network.
136
137 In most cases, the first thing you need to do is make the WGT-11 accessible to the network.
138
139
140 == 2.1 Connects to the network and accesses the gateway Web UI ==
141
142 === 2.1.1 connect the network ===
143
144
145 ==== (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ====
146
147
148 (((
149 Connect the WGT-11 Ethernet port to your router and WGT-11 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the WGT-11.
150 )))
151
152 (((
153 You can also use this IP to connect.
154 )))
155
156 [[image:image-20220622100129-1.png||height="332" width="1263"]]
157
158
159
160 ==== (% style="color:blue" %)**Method 2**(%%):  Connect via WGT-11 Fallback IP ====
161
162
163 [[image:image-20230107084650-2.png||height="310" width="839"]]
164
165
166 (% style="color:blue" %)**Steps to connect via fallback IP:**
167
168 ~1. Connect the PC's Ethernet port to WGT-11's WAN port
169
170 2. Configure PC's Ethernet port has IP: 172.31.255.253 and Netmask: 255.255.255.252
171
172
173 Settings ~-~-> Network & Internet ~-~-> Ethernet ~-~-> Change advanced sharing options ~-~-> Double-click"Ethernet" ~-~-> Internet Protocol Version 4 (TCP/IPv4)
174
175
176 As in the below photo:
177
178 [[image:image-20230413172038-1.png||height="732" width="1243"]]
179
180
181 Configure computer Ethernet port steps video: **[[attach:fallback ip.mp4||target="_blank"]]**
182
183 If you still can't access the WGT-11 fallback ip, follow this connection to debug :**[[Trouble Shooting>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H9.2A0FallbackIPdoesnotwork2Chowcanuserscheck]]**
184
185
186 3. In the PC, use IP address 172.31.255.254 to access the WGT-11 via Web or Console.
187
188 [[image:image-20230111094247-2.png||height="619" width="1250"]]
189
190
191
192 ==== (% style="color:blue" %)**Method 3**(%%):  Connect via WiFi with DHCP IP from the router ====
193
194 [[image:image-20220622100542-2.png||height="369" width="1256"]]
195
196
197 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
198
199
200 [[image:image-20220622102702-6.png]]
201
202
203
204 **Wi-Fi configuration successful**
205
206
207 [[image:image-20220622102847-7.png]]
208
209
210 [[image:image-20220622102901-8.png||height="476" width="938"]]
211
212
213 === 2.1.2 Access Configure Web UI ===
214
215
216 **Web Interface**
217
218 Open a browser on the PC and type the WGT-11 ip address (depends on your connect method)
219
220
221 [[(% style="background-color:yellow" %)**//http:~~/~~/IP_ADDRESS //**>>http://IP_ADDRESS]](%%) or (% style="background-color:yellow" %)//**[[http:~~/~~/172.31.255.254>>http://172.31.255.254(]]**//(Fallback IP)
222
223 You will see the login interface of WGT-11 as shown below.
224
225 The account details for Web Login are:
226
227 (% style="color:#4f81bd" %)**User Name: root**
228
229 (% style="color:#4f81bd" %)**Password:   dragino**
230
231 [[image:image-20230106153501-1.png||height="367" width="894"]]
232
233
234 == 2.2  Typical Network Setup ==
235
236 === 2.2.1  Overview ===
237
238
239 WGT-11 supports flexible network set up for different environment. This section describes the typical network topology can be set in WGT-11. The typical network set up includes:
240
241 * **WAN Port Internet Mode**
242 * **WiFi Client Mode**
243 * **Cellular Mode**
244
245
246
247 === 2.2.2  Use WAN port to access Internet ===
248
249
250 By default, the WGT-11 is set to use the WAN port to connect to an upstream network. When you connect the WGT-11's WAN port to an upstream router, WGT-11 will get an IP address from the router and have Internet access via the upstream router. The network status can be checked in the (% style="color:blue" %)**home page**(%%):
251
252
253 [[image:image-20230411100633-2.png||height="501" width="935"]]
254
255
256 === 2.2.3  Access the Internet as a WiFi Client ===
257
258
259 In the WiFi Client Mode, WGT-11 acts as a WiFi client and gets DHCP from an upstream router via WiFi.
260
261 The settings for WiFi Client is under page (% style="color:blue" %)**Network ~-~-> Wi-Fi**
262
263 [[image:image-20230411095739-1.png||height="264" width="691"]]
264
265 In the WiFi Survey Choose the WiFi AP, and input the Passphrase then click(% style="color:blue" %)** Save & Apply**(%%) to connect.
266
267
268 === 2.2.4  Use built-in 4G modem for internet access ===
269
270
271 (% style="color:blue" %)**Since Hardware version HP0C 1.4**
272
273 Users can see whether WGT-11 has EC25 on the label of the gateway to determine whether there is 3G/4G Cellular modem.
274
275
276 If the WGT-11 has 3G/4G Cellular modem, user can use it as main internet connection or back up.
277
278 First, install the Micro SIM card as below direction
279
280 Second, Power off/ ON WGT-11 to let it detect the SIM card.
281
282
283 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090855037-497.png?rev=1.1||alt="1657090855037-497.png"]]
284
285
286 The set up page is (% style="color:blue" %)**Network ~-~-> Cellular**
287
288 While use the cellular as Backup WAN, device will use Cellular for internet connection while WAN port or WiFi is not valid and switch back to WAN port or WiFi after they recover.
289
290
291 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1657090932270-444.png?rev=1.1||alt="1657090932270-444.png"]]
292
293
294 === 2.2.5  Check Internet connection ===
295
296 In the **home** page, we can check the Internet connection.
297
298 * GREEN Tick ​​​​ [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436675869-206.png?width=15&height=14&rev=1.1||alt="1652436675869-206.png"]] : This interface has Internet connection.
299 * Yellow  Tick  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436705761-420.png?width=15&height=15&rev=1.1||alt="1652436705761-420.png"]] : This interface has IP address but don't use it for internet connection.
300 * RED Cross  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/WebHome/1652436787176-950.png?width=15&height=14&rev=1.1||alt="1652436787176-950.png"]] : This interface doesn't connected or no internet.
301
302 [[image:image-20230411101534-3.png||height="544" width="942"]]
303
304
305 == 2.3 The WGT-11 is registered and connected to The Things Network ==
306
307 === 2.3.1 Select your area frequency ===
308
309
310 (((
311 First, you need to set the frequency plan in WGT-11 to match the end node we use, so to receive the LoRaWAN packets from the LoRaWAN sensor.
312
313
314 )))
315
316 [[image:image-20220622103332-9.png||height="485" width="938"]]
317
318
319 === 2.3.2 Get the only gateway EUI ===
320
321
322 Every WGT-11 has a unique gateway id. The ID can be found on LoRaWAN Semtech page:
323
324
325 [[image:image-20220622103355-10.png||height="698" width="949"]]
326
327
328 (% style="color:red" %)**Note: Choose the cluster that corresponds to a specific Gateway server address**
329
330
331 **➢ Europe 1:**  corresponding Gateway server address:  **eu1.cloud.thethings.network**
332
333 **➢ North America 1:**  corresponding Gateway server address:  **nam1.cloud.thethings.network**
334
335 **➢ Australia 1: ** corresponding Gateway server address:  **au1.cloud.thethings.network**
336
337 **➢ Legacy V2 Console:** TTN v2 shuts down in December 2021
338
339
340 [[image:image-20220622103956-12.png]]
341
342
343 === 2.3.3 Register the gateway to The Things Network ===
344
345
346 **Login to The Things Network**
347
348 [[https:~~/~~/console.cloud.thethings.network/>>https://console.cloud.thethings.network/]]
349
350
351 **Add the gateway**
352
353 [[image:image-20220622104252-13.png||height="511" width="953"]]
354
355
356 **Get it online**
357
358
359 = 3. Web Configure Pages =
360
361 == 3.1 Home ==
362
363
364 //Shows the system running status~://
365
366 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
367
368
369 == 3.2 LoRa Settings ==
370
371 === 3.2.1 LoRa ~-~-> LoRa ===
372
373
374 //This page shows the LoRa Radio Settings. There is a set of default frequency bands according to LoRaWAN protocol, and users can customize the band* as well.//
375
376 //Different WGT-11 hardware versions can support different frequency ranges~://
377
378 * (% style="color:#0000ff" %)//**868**//(% style="color:black" %)//: valid frequency: 863Mhz ~~ 870Mhz. for bands EU868, RU864, IN865, or KZ865.//
379 * (% style="color:#0000ff" %)//**915**//(% style="color:black" %)//: valid frequency: 902Mhz ~~ 928Mhz. for bands US915, AU915, AS923 or KR920//
380
381 (% class="wikigeneratedid" %)
382 //After the user choose the frequency plan,  the user can see the actual frequency is used by checking the page (% style="color:#037691" %)**LogRead ~-~-> LoRa Log**//
383
384
385 (% class="wikigeneratedid" %)
386 [[image:image-20220616110739-1.png||height="372" width="682"]]
387
388
389 (((
390 (% style="color:red" %)//**Note *: See this instruction for how to customize the frequency band: **//(%%)**//__[[How to customized LoRaWAN frequency band - DRAGINO>>doc:Main.How to customized LoRaWAN frequency band.WebHome]]__//**
391 )))
392
393
394 == 3.3 LoRaWAN Settings ==
395
396 === 3.3.1 LoRaWAN ~-~-> LoRaWAN Semtech UDP ===
397
398
399 //This page is for the connection set up to a general LoRaWAN Network server such as [[TTN>>url:http://www.thethingsnetwork.org/]], [[ChirpStack>>url:https://www.chirpstack.io/]], etc.//
400
401
402 [[image:image-20220616111932-2.png||height="516" width="672"]]
403
404
405 === 3.3.2 LoRaWAN ~-~-> LoRaWAN Basic Station ===
406
407
408 This page is for the connection set up to the TTN Basic Station, AWS-IoT, etc.
409
410
411 [[image:image-20220616113246-3.png||height="396" width="672"]]
412
413
414 (((
415 Please see this instruction to know more detail and a demo for how to use of LoRaWAN Basic Station: __[[Use of LoRaWAN Basic Station - DRAGINO>>doc:Main.Use of LoRaWAN Basic Station.WebHome]]__
416 )))
417
418
419 == 3.4 Network Settings ==
420
421 === 3.4.1 Network ~-~-> WiFi ===
422
423
424 [[image:image-20220616114756-4.png||height="251" width="669"]]
425
426
427 === 3.4.2 Network ~-~-> System Status ===
428
429
430 [[image:image-20220820134112-2.png||height="539" width="668"]]
431
432
433 === 3.4.3 Network ~-~-> Network ===
434
435
436 In the Network ~-~-> Network interface, Users can set the Ethernet WAN static ip address.
437
438 [[image:image-20230214093657-2.png||height="333" width="858"]]
439
440
441 === 3.4.4 Network ~-~-> Cellular ===
442
443
444 In the Network ~-~-> Cellular interface, Users can Enable Cellular WAN and configure Celluar.
445
446 (% style="color:red" %)**Note: APN cannot be empty.**
447
448 [[image:image-20230228115126-1.png]]
449
450
451 After the configuration is complete, return to the Home interface and put the mouse on the Cell icon to check the Cellualr state.
452
453 [[image:image-20230228115535-2.png||height="478" width="888"]]
454
455
456 == 3.5 System ==
457
458 === 3.5.1 System ~-~-> System Overview ===
459
460
461 Shows the system info:
462
463 [[image:image-20220917144512-5.png||height="618" width="853"]]
464
465
466 === 3.5.2 System ~-~-> System General ===
467
468
469 In the System-> System General interface, Users can customize the configuration System Password and set Timezone.
470
471 In addition, Users can customize the FallBack IP address.
472
473 [[image:image-20230214094058-3.png]]
474
475
476 === 3.5.3 System ~-~-> Backup/Restore ===
477
478
479 [[image:image-20220917144725-6.png||height="208" width="869"]]
480
481
482 === 3.5.4 System ~-~-> Remoteit ===
483
484
485 In the System-> Remoteit interface, users can configure the gateway to be accessed remotely via Remote.it.
486
487
488 the users can refer to this link to configure them: **[[Monitor & Remote Access Gateway>>http://wiki.dragino.com/xwiki/bin/view/Main/Monitor%20%26%20Remote%20Access%20Gateway/?Remote%20Access#H2.1A0RemoteAccessviaRemote.it.]]**
489
490 [[image:image-20221230092303-2.png]]
491
492
493 === 3.5.5 System ~-~-> Package Management ===
494
495
496 In the System ~-~-> Package Management interface, Users can check the current version of Core Packages.
497
498 [[image:image-20230214094316-4.png]]
499
500
501 = 4. Build-in Server =
502
503
504 The default factory version of WGT-11 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red, and**(%%) LoRaWAN Server: (% style="color:blue" %)**The Things Network - Stack (Open Source 3.19 Version).**
505
506
507 [[image:image-20230214095318-5.png||height="347" width="980"]]
508
509
510 (% style="color:red" %)**Note:**
511
512 **Path**: System ~-~-> Built-in Server
513
514
515 **Troubleshooting:**
516
517
518 **~ 1. URL does not jump properly**
519
520 For the ttn-stack, you can click the update the URL which will update the configuration where change the hostname to the current local IP address as the URL.
521
522 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
523
524
525 == 4.1 LoRaWAN Network  Server ~-~- The Things Network - Stack (TTN-V3) ==
526
527
528 You can access the gateway's built-in LNS server of (% style="color:blue" %)**The Things Network - Stack **(%%)via the URL( (% style="background-color:yellow" %)__**//http:~/~/<hostname>:8080 or http:~/~/<local-IPV4-address> //**__(%%)) in your browser.
529
530 Such as  (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:8080  or http:~/~/<Local-IPV4-Address>//**__
531
532
533 Login account:
534
535 **User ID: ** ** (% style="background-color:yellow" %)admin(%%)**
536
537 **Password: ** ** (% style="background-color:yellow" %)dragino(%%)**
538
539
540 [[image:image-20220725171719-1.png||height="570" width="769"]]
541
542
543 === 4.1.1 The WGT-11 is registered and connected to Built-in The Things Network ===
544
545
546 Users need to set the Service Provider to (% style="color:blue" %)**Local Host/Build-in Server **(%%) and click "Save&Apply"
547
548 The registration steps are basically similar to [[WGT-11 is registered and connected to The Things Network>>||anchor="H2.3TheWGT-11isregisteredandconnectedtoTheThingsNetwork"]]
549
550 [[image:image-20230321092456-1.png]]
551
552
553 == 4.2 Application Server ~-~- Node-Red ==
554
555
556 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
557
558
559 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
560
561
562 [[image:image-20220725172124-3.png||height="610" width="843"]]
563
564
565
566 === **Using Node-Red, InfluxDB and Grafana** ===
567
568 The WGT-11 supports this combination, the default, Node-red is pre-installed but the InfluxDB and Grafana is not pre-installed.
569
570
571 the users can refer to this link to install them.
572
573 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.6HowtoinstallGrafanaandinfluxdb]]
574
575
576 === **Upgrade the node.js** ===
577
578 By default, the WGT-11 node.js uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old.
579
580
581 the users can refer to this link to upgrade them.
582
583 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.>>http://wiki.dragino.com/xwiki/bin/view/Main/Armbian%20OS%20instruction/#H2.5Howtoupgradethenodejsversiontothelatest.]]
584
585
586 == 4.3 How to disable the built-in server ==
587
588
589 Use the following commands to start and stop the TTNv3 service:
590
591 (% class="box infomessage" %)
592 (((
593 **# start**
594 systemctl start ttnstack
595
596 **# stop**
597 systemctl stop ttnstack
598
599 **# enable**
600 systemctl enable ttnstack
601
602 **#disable**
603 systemctl disable ttnstack
604 )))
605
606 Use the following commands to start and stop the Node-Red service:
607
608 (% class="box infomessage" %)
609 (((
610 **# start**
611 systemctl start nodered
612
613 **# stop**
614 systemctl stop nodered
615
616 **# enable**
617 systemctl enable nodered
618
619 **#disable**
620 systemctl disable nodered
621 )))
622
623
624 == 4.4 How to use ChirpStack on WGT-11 ==
625
626
627 By default, the built-in LoRaWAN network server used on WGT-11 is TTNv3, so users need to disable TTNv3 services and follow this link to install chirpstack:
628
629 [[ChirpStack open-source LoRaWAN® Network Server documentation>>https://www.chirpstack.io/docs/getting-started/docker.html]]
630
631 [[image:image-20230222094908-1.png||height="133" width="798"]]
632
633
634 = 5. How the WGT-11 connects to Chirpstack via gateway-bridge =
635
636
637
638 = 6. How users can access WGT-11 using serial USB =
639
640
641 (% style="color:blue" %)**USB TTL to WGT-11  Connection:**
642
643
644 Port 1 of the UART on the WGT-11 is GND
645
646 (% class="box infomessage" %)
647 (((
648 **TXD  <~-~--> UART RXD (Gray line)**
649
650 **RXD  <~-~--> UART TXD (White line)**
651
652 **GND <~-~--> GND (Black line)**
653 )))
654
655
656 **WGT-11 UART connection photo**
657
658
659 [[image:image-20230421094319-2.png||height="351" width="392"]]
660
661 In the PC,you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for WGT-11. WGT-11 will output system info once power on as below:
662
663
664 [[image:image-20220804164928-3.png||height="320" width="332"]]
665
666
667 [[image:image-20220804164747-2.png||height="622" width="594"]]
668
669
670 = 7. Use the helium gateway-rs as the Data-only Hotspot =
671
672
673 == **Step 1: Configure Frequency Band** ==
674
675
676 //Each country has a requirement for frequency region. Choose the right one for your area.//
677
678 [[image:image-20220905164308-1.png]]
679
680
681
682 == **Step 2: Configure the forward address** ==
683
684
685 **Select one of the servers to configure.**
686
687 **For example:**
688
689 [[image:image-20220905164847-2.png]]
690
691
692
693 == **Step 3: Download and Install the Helium-gateway-rs** ==
694
695
696 **Access the gateway CLI via SSH.**
697
698 [[image:image-20220905165222-3.png]]
699
700
701 **Download gateway-rs.**
702
703 [[image:image-20220905165715-5.png]]
704
705 (% class="box infomessage" %)
706 (((
707 **Command: wget [[http:~~/~~/repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb>>http://repo.dragino.com/release/tool/gateway-rs/helium-gateway-v1.0.0-alpha.31-raspi234.deb]]**
708 )))
709
710
711 **Install gateway-rs.**
712
713 [[image:image-20220905165917-7.png]]
714
715 (% class="box infomessage" %)
716 (((
717 **Command: dpkg -i helium-gateway-v1.0.0-alpha.31-raspi234.deb **
718 )))
719
720
721 **Modify configuration.**
722
723
724 [[image:image-20220905173847-12.png]]
725
726
727 (% class="box infomessage" %)
728 (((
729 **region=<Enter regional parameters> \
730 && sed -i '/region/d' /etc/helium_gateway/settings.toml && sed -i "1 i\region = \"$region\"" /etc/helium_gateway/settings.toml \
731 && sed -i '/region/d' /etc/helium_gateway/default.toml && sed -i "22 i\region = \"$region\"" /etc/helium_gateway/default.toml**
732 )))
733
734
735 **Restart the helium_gateway**
736
737 [[image:image-20220905170920-9.png]]
738
739
740 (% class="box infomessage" %)
741 (((
742 **systemctl restart helium_gateway**
743 )))
744
745
746 **Check the helium_gateway Log：**
747
748 [[image:image-20220905173952-13.png]]
749
750
751 (% class="box infomessage" %)
752 (((
753 **journalctl -u helium_gateway -f**
754 )))
755
756
757 (% style="color:red" %)**Note: if your device is not finished the onboarding, which is unable to connect to the Helium console.**
758
759 where the helium gateway log is shown:
760
761 [[image:image-20220905174534-14.png]]
762
763
764 So you have to finish the onboarding, ~-~--Please refer to [[Step 2.7>>doc:Main.Notes for Helium.WebHome||anchor="H2.7A0Step6:OnboardingData-OnlyHotspot"]] to onboarding your WGT-11.
765
766
767 = 8. OTA System Update =
768
769
770 WGT-11 supports system auto update via OTA, please see **[[this URL>>url:http://wiki.dragino.com/xwiki/bin/view/OTA%20Update/]]** for the detail of this feature.
771
772
773 = 9. Trouble Shooting =
774
775 == 9.1  I can't log in to the built-in Server TTN Stack which shows '**Login failed**'. ==
776
777
778 [[image:image-20220920135918-1.png]]
779
780
781 This is caused by the inconsistency between the built-in TTN-Stack domain configuration and your login URL.
782
783 By default, ttn-stack uses the gateway's domain name for URL resolution, but in some networks, they prefer to resolve IP-v4 addresses.
784
785
786 So you can change the domain name of the TTN-Stack configuration to the IPv4 address.
787
788 **Click the update URL button to configure the URL with the current eth port address.**
789
790 [[image:image-20220920141936-2.png]]
791
792
793 == 9.2  Fallback IP does not work, how can users check ==
794
795
796 When the computer has completed the above fallback IP configuration,the WGT-11 Web UI is still not accessible via fallback IP.
797
798
799 **1.Check whether the configuration is correct**
800
801 Run the CMD command to ipconfig and ping 172.31.255.254.
802
803 If this fails, the user needs to reconfigure.
804
805 [[image:image-20230413170224-3.png||height="433" width="707"]]
806
807 [[image:image-20230413170246-4.png]]
808
809
810 **2. Check whether the firewall is disabled**
811
812 If the firewall is not down, this will affect access to the gateway.
813
814
815 = (% style="color:inherit; font-family:inherit; font-size:29px" %)10. Supports(%%) =
816
817
818 (((
819 **If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].**
820 )))
821
822 (((
823 **With your question as detailed as possible. We will reply and help you in the shortest.**
824
825
826 = 11. Reference =
827
828
829 * Install Tago Core: Refer **Install Tago Core in WGT-11** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
830 * [[Advance OS Reference Guide for WGT-11>>doc:Main.Armbian OS instruction.WebHome]].
831
832
833 )))
834
835 = 12. Order Info =
836
837
838 (% style="color:#0000ff" %)**WGT-11-XXX-YYY**
839
840 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
841
842 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
843 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
844 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
845 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
846 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
847 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
848
849 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
850
851 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
852 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
853 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
854 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
855
856 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
857
858
859 = 13. Manufacturer Info =
860
861
862 **Shenzhen Dragino Technology Development co. LTD**
863
864 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
865
866 LongCheng Street, LongGang District ; Shenzhen 518116,China
867
868
869 = 14. FCC Warning =
870
871
872 (((
873 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
874 )))
875
876 (((
877 ~-~- Reorient or relocate the receiving antenna.
878 )))
879
880 (((
881 ~-~- Increase the separation between the equipment and receiver.
882 )))
883
884 (((
885 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
886 )))
887
888 (((
889 ~-~- Consult the dealer or an experienced radio/TV technician for help.
890 )))
891
892
893 (((
894 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
895 )))
896
897
898 (((
899 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
900
901
902 )))
903 )))

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0