Wiki source code of How to set the transmit time interval -- LoRaWAN End node
Last modified by Bei Jinggeng on 2022/11/10 14:31
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
14.3 | 1 | **~ Table of Contents:** |
| |
1.1 | 2 | |
| |
14.3 | 3 | {{toc/}} |
| 4 | |||
| |
14.4 | 5 | |
| 6 | |||
| 7 | |||
| |
1.2 | 8 | = 1. Introduction = |
| |
1.1 | 9 | |
| |
14.3 | 10 | |
| |
9.2 | 11 | This chapter describes how to set Transmit Time Interval. |
| |
1.1 | 12 | |
| |
13.2 | 13 | |
| |
9.2 | 14 | = 2. Downlink Payload = |
| |
1.1 | 15 | |
| |
14.3 | 16 | |
| |
1.2 | 17 | TDC can be controlled by Downlink Payload. |
| |
1.1 | 18 | |
| |
9.3 | 19 | ((( |
| |
14.3 | 20 | **For example**: AT+TDC=0x258=600s ** ; Payload: **01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal. |
| |
9.3 | 21 | ))) |
| |
1.1 | 22 | |
| |
13.2 | 23 | [[image:image-20220527085044-1.png]] |
| |
1.1 | 24 | |
| 25 | |||
| |
14.3 | 26 | If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal)，while type code is 01. |
| |
2.1 | 27 | |
| |
14.3 | 28 | **Payload: **01 00 00 1E TDC=30s Payload: 01 00 00 3C TDC=60s |
| |
1.1 | 29 | |
| 30 | |||
| |
18.1 | 31 | Example Downlink payload setting in TTN: |
| |
13.2 | 32 | |
| |
18.1 | 33 | [[image:image-20221110143023-2.png||height="632" width="808"]] |
| 34 | |||
| 35 | |||
| 36 | |||
| |
14.3 | 37 | = 3. Downlink Method = |
| |
1.1 | 38 | |
| |
14.3 | 39 | |
| |
14.2 | 40 | See use note for different serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server) |
| |
14.3 | 41 | |
| 42 |