How to set the transmit time interval
Version 5.1 by Edwin Chen on 2022/05/12 11:17
1. Introduction
This chapter describes how to set Transmit Time Interval for Dragino Sensors.
2. via AT Command through UART interface
3. via LoRaWAN Downlink
TDC can be controlled by Downlink Payload.
For example: AT+TDC=0x258=600s Payload: 01 00 02 58 TDC=600s The time interval is represented by hexadecimal conversion to decimal.
If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), 3C (HEX) = 60 (decimal),while type code is 01.
Payload: 01 00 00 1E TDC=30s Payload: 01 00 00 3C TDC=60s
3. Downlink Method
See use note for different serves Servers Note