Wiki source code of Armbian OS instruction
Version 97.1 by Kilight Cao on 2023/05/08 15:58
Hide last authors
author | version | line-number | content |
---|---|---|---|
15.1 | 1 | **Table of Contents:** | |
2 | |||
3 | {{toc/}} | ||
4 | |||
1.1 | 5 | ||
50.1 | 6 | ||
7 | |||
48.2 | 8 | = 1. Overview = | |
9 | |||
10 | |||
1.1 | 11 | This is a general instruction for the use of Armbian base OS of Dragino devices. Current models include: | |
12 | |||
13 | * HP0A | ||
14 | * HP0C | ||
15 | * LPS8v2 | ||
55.1 | 16 | * MS20 | |
1.1 | 17 | ||
90.3 | 18 | (% style="display:none" %) | |
90.2 | 19 | ||
20 | |||
48.2 | 21 | = 2. Development Guide = | |
22 | |||
23 | |||
70.4 | 24 | For advanced users to develop Driver/ Linux etc. | |
4.1 | 25 | ||
25.1 | 26 | ||
48.2 | 27 | == 2.1 How to recompile LoRaWAN Concentrator Driver ( dragino-fwd package). == | |
4.1 | 28 | ||
29 | |||
48.3 | 30 | === (% style="color:blue" %)**Step 1. Clone dragino-fwd package**(%%) === | |
4.1 | 31 | ||
30.1 | 32 | ||
70.4 | 33 | **Requirements:** | |
48.3 | 34 | ||
70.4 | 35 | **~ (% style="background-color:yellow; color:green" %)sudo apt install -y libsqlite3-dev(%%)** | |
30.1 | 36 | ||
70.4 | 37 | **~ (% style="background-color:yellow; color:green" %)sudo apt install -y libftdi1-dev(%%)** | |
11.1 | 38 | ||
48.3 | 39 | ||
70.4 | 40 | **Run command clone dragino-fwd package: (% style="background-color:yellow; color:green" %)git clone https:~/~/github.com/dragino/dragino_fwd_src.git(%%)** | |
11.1 | 41 | ||
70.4 | 42 | ||
11.1 | 43 | [[image:image-20220527151010-1.png]] | |
44 | |||
45 | |||
48.3 | 46 | === (% style="color:blue" %)**Step 2. Compile dragino_fwd**(%%) === | |
48.1 | 47 | ||
11.1 | 48 | ||
70.4 | 49 | **After cloning is complete, Run the command starts compiling:** | |
48.3 | 50 | ||
70.5 | 51 | (% style="background-color:yellow; color:green" %)**Compile HP0C/HP0A fwd: ./hp0z-make-deb.sh c** | |
70.4 | 52 | ||
70.5 | 53 | ||
11.1 | 54 | The following example compilers HP0C fwd. | |
55 | |||
56 | [[image:image-20220527153913-3.png]] | ||
57 | |||
58 | |||
59 | |||
70.5 | 60 | When the compilation is complete a** (% style="color:blue" %)draginofwd-*.deb(%%) **package is generated. | |
61 | |||
11.1 | 62 | [[image:image-20220527154311-4.png||height="385" width="773"]] | |
63 | |||
25.1 | 64 | ||
48.3 | 65 | === (% style="color:blue" %)**Step 3. Install the dragino_fwd**(%%) === | |
11.1 | 66 | ||
14.1 | 67 | ||
70.4 | 68 | **Run command:** | |
11.1 | 69 | ||
70.5 | 70 | (% style="background-color:yellow; color:green" %)**dpkg -i draginofwd-*.deb ** | |
11.1 | 71 | ||
70.4 | 72 | ||
11.1 | 73 | [[image:image-20220527154811-5.png]] | |
74 | |||
75 | |||
48.3 | 76 | === (% style="color:blue" %)**Step 4. Test**(%%) === | |
14.1 | 77 | ||
48.3 | 78 | ||
70.5 | 79 | **Check the dragino_fwd log:** | |
11.1 | 80 | ||
70.5 | 81 | (% style="background-color:yellow; color:green" %)**journalctl -u draginofwd -f** | |
11.1 | 82 | ||
70.4 | 83 | ||
13.1 | 84 | [[image:image-20220527165221-7.png||height="182" width="931"]] | |
11.1 | 85 | ||
48.3 | 86 | ||
70.5 | 87 | **Start/stop dragino_fwd via systemctl:** | |
11.1 | 88 | ||
70.5 | 89 | (% style="background-color:yellow; color:green" %)**systemctl start draginofwd** | |
13.1 | 90 | ||
70.5 | 91 | (% style="background-color:yellow; color:green" %)**systemctl stop draginofwd** | |
46.1 | 92 | ||
13.1 | 93 | ||
48.3 | 94 | == 2.2 How to clone Complete OS on the EMMC to SD card == | |
27.1 | 95 | ||
57.1 | 96 | == 2.3 How to flash SD card to (eMMC) device's built-in Memory == | |
48.3 | 97 | ||
67.2 | 98 | === 2.3.1 Prepare an SD card with OS === | |
57.1 | 99 | ||
67.2 | 100 | ||
70.5 | 101 | (% style="background-color:yellow" %)//**Preparations:**// | |
51.1 | 102 | ||
97.1 | 103 | //1. Prepare an SD card and a card reader device// | |
51.1 | 104 | ||
97.1 | 105 | //2. Formatting the SD card (Make sure the SD card is empty)// | |
51.1 | 106 | ||
75.1 | 107 | 3. //Download the OS image from the **[[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]**: ( File format **dragino-lps8v2-1.7.img** )// | |
51.1 | 108 | ||
61.1 | 109 | 4. //A Flash software tool ( Such as v1.7.9 from **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )// | |
51.1 | 110 | ||
97.1 | 111 | 5. //SD Card **[[formatter>>url:http://repo.dragino.com/release/tool/PanasonicSDFormatter.zip]]**// | |
51.1 | 112 | ||
113 | |||
97.1 | 114 | ==== Step 1. Formatting the SD Card ==== | |
115 | |||
116 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609111027-9.png?rev=1.1||alt="image-20220609111027-9.png" height="318" width="292"]] | ||
117 | |||
118 | |||
119 | ==== Step 2. Select the OS image ==== | ||
120 | |||
121 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104907-8.png?rev=1.1||alt="image-20220609104907-8.png" height="435" width="689"]] | ||
122 | |||
123 | |||
124 | ==== Step 3. Select the target ==== | ||
125 | |||
126 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104637-2.png?rev=1.1||alt="image-20220609104637-2.png" height="436" width="690"]] | ||
127 | |||
128 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104701-3.png?rev=1.1||alt="image-20220609104701-3.png" height="436" width="690"]] | ||
129 | |||
130 | |||
131 | ==== Step 4. Flash start ==== | ||
132 | |||
133 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104727-4.png?rev=1.1||alt="image-20220609104727-4.png" height="435" width="689"]] | ||
134 | |||
135 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0D/WebHome/image-20220609104741-5.png?rev=1.1||alt="image-20220609104741-5.png" height="434" width="687"]] | ||
136 | |||
137 | |||
138 | |||
67.2 | 139 | === 2.3.2 Flash SD card to device's eMMC === | |
140 | |||
141 | |||
57.1 | 142 | //1. Open the device's enclosure, and put the SD card into the SD card slot// | |
51.1 | 143 | ||
97.1 | 144 | //2. After the device is powered on, use the serial port or gateway ip address to access the CLI of the gateway.// | |
51.1 | 145 | ||
57.1 | 146 | //3. Login and run the below command to flash.// | |
147 | |||
148 | |||
97.1 | 149 | //The following are two methods for accessing the gateway CLI~:// | |
150 | |||
151 | |||
152 | **Method1. Use the serial port USB to access the gateway CLI** | ||
153 | |||
154 | //For more information about how to access gateway using serial USB, see this link~:// | ||
155 | |||
156 | [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H6.HowuserscanaccessLPS8-V2usingserialUSB>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/#H6.HowuserscanaccessLPS8-V2usingserialUSB]] | ||
157 | |||
158 | |||
159 | **Method2. Use the IP address to access the gateway CLI** | ||
160 | |||
161 | //Users can access the gateway CLI via the SSH protocol. Make sure your PC and the gateway are connected to the same network, then use a SSH tool (such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows) to access it.// | ||
162 | |||
163 | |||
164 | IP address: IP address of gateway or **Fallback IP**(172.31.255.254) | ||
165 | |||
166 | Port: 22 | ||
167 | |||
168 | User Name: (% style="color:blue" %)**root** | ||
169 | |||
170 | Password: (% style="color:blue" %)**dragino**(%%) (default) | ||
171 | |||
172 | //After logging in, you will be in the gateway CLI and can enter commands as shown below.// | ||
173 | |||
174 | |||
175 | [[image:image-20230508155357-1.png||height="225" width="634"]] | ||
176 | |||
177 | |||
70.4 | 178 | **Run command:** | |
27.1 | 179 | ||
70.6 | 180 | (% style="background-color:yellow; color:green" %)**nand-sata-install** | |
27.1 | 181 | ||
70.4 | 182 | ||
27.1 | 183 | [[image:image-20220602112051-1.png]] | |
184 | |||
28.1 | 185 | ||
27.1 | 186 | ||
70.7 | 187 | Select the (% style="color:red" %)**"Boot from eMMC - system on eMMC".** | |
188 | |||
27.1 | 189 | [[image:image-20220602112058-2.png||height="292" width="646"]] | |
190 | |||
72.2 | 191 | ||
27.1 | 192 | [[image:image-20220602112106-3.png||height="301" width="643"]] | |
193 | |||
194 | |||
72.2 | 195 | ||
70.7 | 196 | Select the (% style="color:red" %)**"1 ext4"** | |
27.1 | 197 | ||
198 | [[image:image-20220602112113-4.png||height="271" width="642"]] | ||
199 | |||
200 | |||
70.7 | 201 | ||
27.1 | 202 | It takes 4-5 minutes to burn from SD card to eMMC | |
203 | |||
204 | [[image:image-20220602112119-5.png||height="309" width="641"]] | ||
205 | |||
72.2 | 206 | ||
27.1 | 207 | [[image:image-20220602112125-6.png||height="281" width="640"]] | |
208 | |||
72.2 | 209 | ||
27.1 | 210 | [[image:image-20220602112131-7.png||height="241" width="638"]] | |
211 | |||
212 | |||
213 | (% style="color:red" %)**Note: After the flash is complete, power off the device and then remove the SD card.** | ||
214 | |||
28.1 | 215 | ||
72.1 | 216 | == 2.4 Default Built Version == | |
67.2 | 217 | ||
72.2 | 218 | ||
72.1 | 219 | [[image:image-20220902155621-1.png]] | |
220 | |||
221 | |||
84.2 | 222 | == 2.5 How to upgrade the nodejs version to the latest. == | |
72.1 | 223 | ||
78.1 | 224 | ||
225 | By default, the nodejs uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old. | ||
226 | |||
227 | [[image:image-20221112145029-2.png]] | ||
228 | |||
229 | **If you want to upgrade the nodejs to the latest, please follow to use these commands on the gateway CIL.** | ||
230 | |||
231 | |||
232 | #install n, which is an Interactively Manage Your Node.js Versions | ||
233 | |||
83.1 | 234 | [[image:image-20221112154230-3.png||height="89" width="689"]] | |
78.1 | 235 | ||
236 | (% class="box infomessage" %) | ||
237 | ((( | ||
238 | **npm install -g n** | ||
239 | ))) | ||
240 | |||
241 | |||
242 | #Install the latest LTS Node.js release (downloading if necessary) | ||
243 | |||
83.1 | 244 | [[image:image-20221112154418-4.png||height="184" width="893"]] | |
245 | |||
78.1 | 246 | (% class="box infomessage" %) | |
247 | ((( | ||
248 | **n lts** | ||
249 | ))) | ||
250 | |||
251 | |||
252 | #Remove all downloaded versions except the installed version | ||
253 | |||
83.1 | 254 | [[image:image-20221112154456-5.png||height="139" width="899"]] | |
78.1 | 255 | ||
256 | (% class="box infomessage" %) | ||
257 | ((( | ||
258 | **n prune** | ||
259 | ))) | ||
260 | |||
261 | |||
262 | (% class="box infomessage" %) | ||
263 | ((( | ||
83.1 | 264 | **apt remove nodejs -y && apt autoremove -y && reboot** | |
78.1 | 265 | ))) | |
266 | |||
267 | |||
268 | Check the current version | ||
269 | |||
83.1 | 270 | [[image:image-20221112154724-6.png]] | |
78.1 | 271 | ||
272 | (% class="box infomessage" %) | ||
273 | ((( | ||
274 | **node -v** | ||
275 | ))) | ||
276 | |||
277 | |||
84.1 | 278 | == 2.6 How to install Grafana and influxdb == | |
279 | |||
280 | |||
281 | === **Grafana:** === | ||
282 | |||
283 | |||
284 | (% class="box infomessage" %) | ||
285 | ((( | ||
286 | curl https:~/~/packages.grafana.com/gpg.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/grafana-archive-keyrings.gpg >/dev/null | ||
287 | echo "deb [signed-by=/usr/share/keyrings/grafana-archive-keyrings.gpg] https:~/~/packages.grafana.com/oss/deb stable main" | sudo tee /etc/apt/sources.list.d/grafana.list | ||
288 | apt update && apt install grafana | ||
289 | ))) | ||
290 | |||
291 | |||
292 | Check the running status: | ||
293 | |||
294 | |||
295 | (% class="box infomessage" %) | ||
296 | ((( | ||
297 | systemctl status grafana-server | ||
298 | ))) | ||
299 | |||
300 | |||
301 | configuration path: | ||
302 | |||
303 | |||
304 | (% class="box infomessage" %) | ||
305 | ((( | ||
306 | /etc/grafana/grafana.ini | ||
307 | ))) | ||
308 | |||
309 | |||
310 | === **Influxdb:** === | ||
311 | |||
312 | |||
313 | (% class="box infomessage" %) | ||
314 | ((( | ||
315 | curl https:~/~/repos.influxdata.com/influxdb.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/influxdb-archive-keyring.gpg >/dev/null | ||
316 | echo "deb [signed-by=/usr/share/keyrings/influxdb-archive-keyring.gpg] https:~/~/repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list | ||
317 | apt update && apt install influxdb | ||
318 | ))) | ||
319 | |||
320 | |||
321 | Check the running status: | ||
322 | |||
323 | |||
324 | (% class="box infomessage" %) | ||
325 | ((( | ||
326 | systemctl status influxdb | ||
327 | ))) | ||
328 | |||
329 | |||
330 | configuration path: | ||
331 | |||
332 | |||
333 | (% class="box infomessage" %) | ||
334 | ((( | ||
335 | /etc/influxdb/influxdb.conf | ||
336 | ))) | ||
337 | |||
338 | |||
95.6 | 339 | = 3. Package Management = | |
340 | |||
95.1 | 341 | == 3.1 Default Package Maintain System == | |
342 | |||
95.6 | 343 | === 3.1.1 How Package-Auto-Update works? === | |
95.1 | 344 | ||
345 | |||
67.2 | 346 | By default, LPS8v2 / MS20 series products have an auto-update feature for main packages. The device will connect to Dragino's auto-update server and check for updates. | |
347 | |||
348 | |||
349 | (% style="color:blue" %)**When devices will check for updates**? | ||
350 | |||
351 | * Devices will check for updates for every boot. | ||
352 | * Devices will check for updates on every day midnight. | ||
353 | |||
354 | (% style="color:blue" %)**What packages will be checked for updates**? | ||
355 | |||
356 | dragino-httpd ~-~- Main Web UI http configuration | ||
357 | |||
358 | dragino-sid ~-~- SN write and read tool | ||
359 | |||
360 | dragino-ui ~-~- Gateway Web UI package | ||
361 | |||
362 | draginofwd ~-~- UDP packet forwarder, LoRa Base Station | ||
363 | |||
364 | draginoups ~-~- Miscellaneous between different versions | ||
365 | |||
366 | |||
70.9 | 367 | ||
67.2 | 368 | (% style="color:blue" %)**Location and changelog for packages**: | |
369 | |||
370 | * Location: http:~/~/repo.dragino.com/release/tool/ | ||
371 | * Changelog: [[http:~~/~~/repo.dragino.com/release/tool/Readme_HP0.txt>>http://repo.dragino.com/release/tool/Readme_HP0.txt]] | ||
372 | |||
373 | (% style="color:blue" %)**How to view auto-updated log** | ||
374 | |||
375 | You can view the log on the page of (% style="color:#037691" %)**System ~-~-> Package Management.** | ||
376 | |||
377 | |||
378 | [[image:1661305025451-220.png]] | ||
379 | |||
380 | |||
70.7 | 381 | ||
67.2 | 382 | (% style="color:blue" %)**Can I disable package-auto-update?** | |
383 | |||
70.8 | 384 | You can check the checkbox and click the(% style="color:red" %)** ‘SAVE’ **(%%)button to enable or disable the auto-update. | |
67.2 | 385 | ||
386 | |||
387 | [[image:1661305258501-636.png]] | ||
388 | |||
389 | |||
95.1 | 390 | === 3.1.2 How to manually update core packages? === | |
67.2 | 391 | ||
392 | |||
70.8 | 393 | You can click the (% style="color:red" %)**‘Manual Update’**(%%) to update the dragino's packages. | |
67.2 | 394 | ||
395 | |||
396 | [[image:1661305328295-218.png]] | ||
397 | |||
398 | |||
95.1 | 399 | === 3.1.3 How to manually update other packages? === | |
67.2 | 400 | ||
401 | |||
402 | For the other packages, you have to access the device's CLI to do it via the apt command. | ||
403 | |||
404 | |||
95.1 | 405 | == 3.2 Set up a 3^^rd^^ party package maintain server == | |
67.2 | 406 | ||
95.1 | 407 | === 3.2.1 Overview === | |
67.2 | 408 | ||
409 | |||
410 | Customers can use their own package maintenance system instead of using the default one from Dragino. They need to set up a package maintenance system for Debian. Lots of instructions are available in Internet, below is a reference instruction. | ||
411 | |||
412 | |||
95.1 | 413 | === 3.2.2 Install Apache2 HTTP server === | |
67.2 | 414 | ||
415 | |||
70.5 | 416 | (% style="background-color:yellow; color:green" %)**apt install apache2** | |
67.2 | 417 | ||
418 | |||
95.1 | 419 | === 3.2.3 Creating Package Directories === | |
67.2 | 420 | ||
421 | |||
70.5 | 422 | **~ (% style="background-color:yellow; color:green" %)cd /var/www/html/(%%)** | |
67.2 | 423 | ||
70.5 | 424 | **~ (% style="background-color:yellow; color:green" %)mkdir debian/release/dists/stable/main/binary-armhf/ -p(%%)** | |
67.2 | 425 | ||
70.5 | 426 | **~ (% style="background-color:yellow; color:green" %)mkdir debian/release/pool/main/d/dragino/ -p(%%)** | |
67.2 | 427 | ||
428 | |||
429 | **Tree Structure:** | ||
430 | |||
431 | (% style="color:red" %)**Note: If you are not familiar with updating servers, most directory names are not recommended to be changed.** | ||
432 | |||
433 | |||
434 | └── debian | ||
435 | |||
436 | └── release | ||
437 | |||
438 | ├── dists | ||
439 | |||
440 | │ └── stable | ||
441 | |||
442 | │ └── main | ||
443 | |||
444 | │ └── binary-armhf | ||
445 | |||
446 | └── pool | ||
447 | |||
448 | └── main | ||
449 | |||
450 | └── d | ||
451 | |||
70.5 | 452 | └── dragino ~-~-> (% style="background-color:yellow; color:green" %)**This is the directory to store the packages. User can change it to other name.** | |
67.2 | 453 | ||
454 | |||
95.1 | 455 | === 3.2.4 Get deb packages === | |
67.2 | 456 | ||
457 | |||
458 | The deb packages for auto-update can be placed in** (% style="color:blue" %)/var/www/html/debian/release/pool/main/d/dragino/(%%)** | ||
459 | |||
460 | Below is an example package(testing-0808.deb) for test purpose: | ||
461 | |||
462 | |||
70.5 | 463 | **~ (% style="background-color:yellow; color:green" %)wget http:~/~/repo.dragino.com/release/tool/unimportant/testing-0808.deb(%%)** | |
67.2 | 464 | ||
70.5 | 465 | **~ (% style="background-color:yellow; color:green" %)cp ./testing-0808.deb /var/www/html/debian/release/pool/main/d/dragino/(%%)** | |
67.2 | 466 | ||
467 | |||
95.1 | 468 | === 3.2.5 Generate Package Index file === | |
67.2 | 469 | ||
470 | |||
70.5 | 471 | (% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/** | |
67.2 | 472 | ||
70.5 | 473 | (% style="background-color:yellow; color:green" %)**dpkg-scanpackages pool/ > dists/stable/main/binary-armhf/Packages** | |
67.2 | 474 | ||
70.5 | 475 | (% style="background-color:yellow; color:green" %)**cat dists/stable/main/binary-armhf/Packages | gzip -9 > dists/stable/main/binary-armhf/Packages.gz** | |
67.2 | 476 | ||
477 | |||
478 | (% style="color:red" %)**Note: Every time a package has been update, above comments need to be executed in the server to get the up-to-date package list.** | ||
479 | |||
480 | |||
95.1 | 481 | === 3.2.6 Generate Release file === | |
67.2 | 482 | ||
483 | |||
70.10 | 484 | ==== (% style="color:blue" %)**Create the generated script:**(%%) ==== | |
67.2 | 485 | ||
486 | |||
70.5 | 487 | (% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/dists/stable** | |
67.2 | 488 | ||
489 | |||
70.5 | 490 | (% style="background-color:yellow; color:green" %)**wget [[http:~~/~~/repo.dragino.com/release/tool/unimportant/generate-release.sh>>url:http://repo.dragino.com/release/tool/unimportant/generate-release.sh]]** | |
67.2 | 491 | ||
70.5 | 492 | (% style="background-color:yellow; color:green" %)**chmod + x ./generate-release.sh** | |
67.2 | 493 | ||
70.5 | 494 | (% style="background-color:yellow; color:green" %)**./generate-release.sh > Release** | |
67.2 | 495 | ||
496 | |||
95.1 | 497 | === 3.2.7 Sign the Release file with gpg and generating Inrelease file === | |
67.2 | 498 | ||
499 | |||
70.7 | 500 | ==== (% style="color:blue" %)**Make sure auto-update server has gnupg**(%%) ==== | |
67.2 | 501 | ||
502 | |||
70.5 | 503 | (% style="background-color:yellow; color:green" %)**apt install gnupg** | |
68.2 | 504 | ||
505 | |||
506 | |||
70.7 | 507 | ==== (% style="color:blue" %)**generate gpg key**(%%) ==== | |
67.2 | 508 | ||
509 | |||
70.5 | 510 | (% style="background-color:yellow; color:green" %)**gpg -gen-key** | |
67.2 | 511 | ||
68.2 | 512 | ||
70.10 | 513 | (% style="color:red" %)**Note: Fill in the content as required and remember the name and email address.** | |
67.2 | 514 | ||
515 | |||
68.2 | 516 | ||
70.7 | 517 | ==== (% style="color:blue" %)**Check the gen-key**(%%) ==== | |
67.2 | 518 | ||
519 | |||
70.5 | 520 | (% style="background-color:yellow; color:green" %)**gen -list-key** | |
67.2 | 521 | ||
68.2 | 522 | ||
523 | |||
70.7 | 524 | ==== (% style="color:blue" %)**Generate the release.gpg**(%%) ==== | |
67.2 | 525 | ||
526 | |||
70.5 | 527 | (% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/dists/stable** | |
67.2 | 528 | ||
70.5 | 529 | (% style="background-color:yellow; color:green" %)**gpg ~-~-armor ~-~-detach-sign -o Release.gpg Release** | |
67.2 | 530 | ||
531 | |||
70.5 | 532 | (% style="background-color:yellow; color:green" %)**gpg ~-~-clearsign -o InRelease Release** | |
67.2 | 533 | ||
534 | |||
68.2 | 535 | ||
70.7 | 536 | ==== (% style="color:blue" %)**Generate the public key**(%%) ==== | |
67.2 | 537 | ||
538 | |||
70.5 | 539 | (% style="background-color:yellow; color:green" %)**gpg ~-~-armor ~-~-output <name>.asc ~-~-export <email address>** | |
67.2 | 540 | ||
68.2 | 541 | ||
67.2 | 542 | **example: gpg ~-~-armor ~-~-output xiao.asc ~-~-export **[[xiaoye@dragino.cc>>mailto:xiaoye@dragino.cc]] | |
543 | |||
544 | |||
545 | |||
95.1 | 546 | === 3.2.8 Add url as apt source in LPS8v2 / MS20 === | |
67.2 | 547 | ||
68.2 | 548 | ||
549 | |||
70.7 | 550 | ==== (% style="color:blue" %)**Add the public key**(%%) ==== | |
67.2 | 551 | ||
552 | |||
70.5 | 553 | (% style="background-color:yellow; color:green" %)**cp xiao.asc /etc/apt/trusted.gpg.d/** | |
67.2 | 554 | ||
70.7 | 555 | ||
68.2 | 556 | (% style="color:red" %)**Note: First need to transfer the public key from auto-update server to device.** | |
67.2 | 557 | ||
68.2 | 558 | ||
559 | |||
70.7 | 560 | ==== (% style="color:blue" %)**Add the apt source list**(%%) ==== | |
67.2 | 561 | ||
68.2 | 562 | ||
67.2 | 563 | Add the apt source list url and name this as test_server.list | |
564 | |||
70.5 | 565 | (% style="background-color:yellow; color:green" %)**echo "deb http:~/~/<IP_address or hostname>/debian/release stable main" | tee /etc/apt/sources.list.d/test_server.list** | |
67.2 | 566 | ||
567 | |||
68.2 | 568 | ||
70.7 | 569 | ==== (% style="color:blue" %)**Validate the apt repository**(%%) ==== | |
67.2 | 570 | ||
68.2 | 571 | ||
67.2 | 572 | Get and install the testing package (download testing-0808.deb and test) | |
573 | |||
70.5 | 574 | (% style="background-color:yellow; color:green" %)**apt update && apt install testing** | |
67.2 | 575 | ||
68.2 | 576 | ||
67.2 | 577 | Example output: | |
578 | |||
68.2 | 579 | [[image:1661306420449-569.png]] | |
67.2 | 580 | ||
581 | |||
95.1 | 582 | === 3.2.9 Configure the gateway's auto-upgrade rules === | |
67.2 | 583 | ||
584 | |||
70.7 | 585 | ==== (% style="color:blue" %)**Remove dragino apt source**(%%) ==== | |
67.2 | 586 | ||
587 | |||
70.5 | 588 | (% style="background-color:yellow; color:green" %)**/etc/apt/sources.list** | |
67.2 | 589 | ||
590 | |||
70.2 | 591 | [[image:1661306460134-112.png]] | |
67.2 | 592 | ||
593 | |||
594 | |||
70.7 | 595 | ==== (% style="color:blue" %)**Set up automatic updates**(%%) ==== | |
67.2 | 596 | ||
597 | |||
70.5 | 598 | (% style="background-color:yellow; color:green" %)**Path : /usr/lib/dragino/dragino-apt-updates** | |
67.2 | 599 | ||
70.2 | 600 | ||
67.2 | 601 | The device performs automatic updates from this script, | |
602 | |||
603 | But it will now only look for dragino as a keyword, so you need to replace the keyword dragino with your own keyword. | ||
604 | |||
605 | |||
70.2 | 606 | [[image:1661306487761-768.png]] | |
95.2 | 607 | ||
608 | |||
609 |