Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 71.1 >
edited by Saxer Lin
on 2023/08/18 09:21
To version < 13.1 >
edited by Edwin Chen
on 2023/05/11 23:11
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB LoRaWAN Sensor Node User Manual
1 +SN50v3-LB User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Edwin
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
1 +[[image:image-20230511201248-1.png||height="403" width="489"]]
3 3  
4 4  
5 5  
... ... @@ -16,21 +16,23 @@
16 16  
17 17  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
18 18  
19 -
20 20  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
21 21  
20 +
22 22  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
23 23  
23 +
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 +
26 26  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
27 27  
29 +
28 28  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
29 29  
30 30  
31 31  == 1.2 ​Features ==
32 32  
33 -
34 34  * LoRaWAN 1.0.3 Class A
35 35  * Ultra-low power consumption
36 36  * Open-Source hardware/software
... ... @@ -43,7 +43,6 @@
43 43  
44 44  == 1.3 Specification ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Common DC Characteristics:**
48 48  
49 49  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -80,7 +80,6 @@
80 80  
81 81  == 1.4 Sleep mode and working mode ==
82 82  
83 -
84 84  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
85 85  
86 86  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -123,7 +123,7 @@
123 123  == 1.7 Pin Definitions ==
124 124  
125 125  
126 -[[image:image-20230610163213-1.png||height="404" width="699"]]
125 +[[image:image-20230511203450-2.png||height="443" width="785"]]
127 127  
128 128  
129 129  == 1.8 Mechanical ==
... ... @@ -136,9 +136,8 @@
136 136  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
137 137  
138 138  
139 -== 1.9 Hole Option ==
138 +== Hole Option ==
140 140  
141 -
142 142  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
143 143  
144 144  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -151,7 +151,7 @@
151 151  == 2.1 How it works ==
152 152  
153 153  
154 -The SN50v3-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the SN50v3-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
152 +The SN50v3-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
155 155  
156 156  
157 157  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -159,7 +159,7 @@
159 159  
160 160  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
161 161  
162 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
160 +The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
163 163  
164 164  
165 165  (% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from SN50v3-LB.
... ... @@ -208,7 +208,7 @@
208 208  === 2.3.1 Device Status, FPORT~=5 ===
209 209  
210 210  
211 -Users can use the downlink command(**0x26 01**) to ask SN50v3-LB to send device configure detail, include device configure status. SN50v3-LB will uplink a payload via FPort=5 to server.
209 +Users can use the downlink command(**0x26 01**) to ask SN50v3 to send device configure detail, include device configure status. SN50v3 will uplink a payload via FPort=5 to server.
212 212  
213 213  The Payload format is as below.
214 214  
... ... @@ -216,44 +216,44 @@
216 216  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
217 217  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
218 218  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
219 -|(% style="width:103px" %)Value|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
217 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
220 220  
221 221  Example parse in TTNv3
222 222  
223 223  
224 -(% style="color:#037691" %)**Sensor Model**(%%): For SN50v3-LB, this value is 0x1C
222 +(% style="color:#037691" %)**Sensor Model**(%%): For SN50v3, this value is 0x1C
225 225  
226 226  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
227 227  
228 228  (% style="color:#037691" %)**Frequency Band**:
229 229  
230 -0x01: EU868
228 +*0x01: EU868
231 231  
232 -0x02: US915
230 +*0x02: US915
233 233  
234 -0x03: IN865
232 +*0x03: IN865
235 235  
236 -0x04: AU915
234 +*0x04: AU915
237 237  
238 -0x05: KZ865
236 +*0x05: KZ865
239 239  
240 -0x06: RU864
238 +*0x06: RU864
241 241  
242 -0x07: AS923
240 +*0x07: AS923
243 243  
244 -0x08: AS923-1
242 +*0x08: AS923-1
245 245  
246 -0x09: AS923-2
244 +*0x09: AS923-2
247 247  
248 -0x0a: AS923-3
246 +*0x0a: AS923-3
249 249  
250 -0x0b: CN470
248 +*0x0b: CN470
251 251  
252 -0x0c: EU433
250 +*0x0c: EU433
253 253  
254 -0x0d: KR920
252 +*0x0d: KR920
255 255  
256 -0x0e: MA869
254 +*0x0e: MA869
257 257  
258 258  
259 259  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -277,40 +277,26 @@
277 277  === 2.3.2 Working Modes & Sensor Data. Uplink via FPORT~=2 ===
278 278  
279 279  
280 -SN50v3-LB has different working mode for the connections of different type of sensors. This section describes these modes. Use can use the AT Command (% style="color:blue" %)**AT+MOD**(%%) to set SN50v3-LB to different working modes.
278 +SN50v3 has different working mode for the connections of different type of sensors. This section describes these modes. Use can use the AT Command AT+MOD to set SN50v3 to different working modes.
281 281  
282 282  For example:
283 283  
284 - (% style="color:blue" %)**AT+MOD=2  ** (%%) ~/~/ will set the SN50v3 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
282 + **AT+MOD=2  ** ~/~/ will set the SN50v3 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
285 285  
286 286  
287 287  (% style="color:red" %) **Important Notice:**
288 288  
289 -~1. Some working modes has payload more than 12 bytes, The US915/AU915/AS923 frequency bands' definition has maximum 11 bytes in (% style="color:blue" %)**DR0**(%%). Server sides will see NULL payload while SN50v3-LB transmit in DR0 with 12 bytes payload.
287 +1. Some working modes has payload more than 12 bytes, The US915/AU915/AS923 frequency bands' definition has maximum 11 bytes in **DR0**. Server sides will see NULL payload while SN50v3 transmit in DR0 with 12 bytes payload.
288 +1. All modes share the same Payload Explanation from HERE.
289 +1. By default, the device will send an uplink message every 20 minutes.
290 290  
291 -2. All modes share the same Payload Explanation from HERE.
292 292  
293 -3. By default, the device will send an uplink message every 20 minutes.
294 -
295 -
296 296  ==== 2.3.2.1  MOD~=1 (Default Mode) ====
297 297  
298 -
299 299  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
300 300  
301 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
302 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
303 -|Value|Bat|(% style="width:191px" %)(((
304 -Temperature(DS18B20)(PC13)
305 -)))|(% style="width:78px" %)(((
306 -ADC(PA4)
307 -)))|(% style="width:216px" %)(((
308 -Digital in(PB15)&Digital Interrupt(PA8)
309 -)))|(% style="width:308px" %)(((
310 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
311 -)))|(% style="width:154px" %)(((
312 -Humidity(SHT20 or SHT31)
313 -)))
296 +|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
297 +|**Value**|Bat|Temperature(DS18B20)|ADC|Digital in & Digital Interrupt|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor|Humidity（SHT20)
314 314  
315 315  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
316 316  
... ... @@ -317,328 +317,225 @@
317 317  
318 318  ==== 2.3.2.2  MOD~=2 (Distance Mode) ====
319 319  
320 -
321 321  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
322 322  
323 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
324 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:30px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
325 -|Value|BAT|(% style="width:196px" %)(((
326 -Temperature(DS18B20)(PC13)
327 -)))|(% style="width:87px" %)(((
328 -ADC(PA4)
329 -)))|(% style="width:189px" %)(((
330 -Digital in(PB15) & Digital Interrupt(PA8)
331 -)))|(% style="width:208px" %)(((
332 -Distance measure by: 1) LIDAR-Lite V3HP
333 -Or 2) Ultrasonic Sensor
334 -)))|(% style="width:117px" %)Reserved
306 +|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
307 +|**Value**|BAT|(((
308 +Temperature(DS18B20)
309 +)))|ADC|Digital in & Digital Interrupt|(((
310 +Distance measure by:
311 +1) LIDAR-Lite V3HP
312 +Or
313 +2) Ultrasonic Sensor
314 +)))|Reserved
335 335  
336 336  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
337 337  
318 +**Connection of LIDAR-Lite V3HP:**
338 338  
339 -(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
320 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324581381-162.png?rev=1.1||alt="1656324581381-162.png"]]
340 340  
341 -[[image:image-20230512173758-5.png||height="563" width="712"]]
322 +**Connection to Ultrasonic Sensor:**
342 342  
324 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324598488-204.png?rev=1.1||alt="1656324598488-204.png"]]
343 343  
344 -(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
345 -
346 -(% style="color:red" %)**Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.**
347 -
348 -[[image:image-20230512173903-6.png||height="596" width="715"]]
349 -
350 -
351 351  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
352 352  
353 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
354 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
355 -|Value|BAT|(% style="width:183px" %)(((
356 -Temperature(DS18B20)(PC13)
357 -)))|(% style="width:173px" %)(((
358 -Digital in(PB15) & Digital Interrupt(PA8)
359 -)))|(% style="width:84px" %)(((
360 -ADC(PA4)
361 -)))|(% style="width:323px" %)(((
328 +|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
329 +|**Value**|BAT|(((
330 +Temperature(DS18B20)
331 +)))|Digital in & Digital Interrupt|ADC|(((
362 362  Distance measure by:1)TF-Mini plus LiDAR
363 -Or 2) TF-Luna LiDAR
364 -)))|(% style="width:188px" %)Distance signal  strength
333 +Or 
334 +2) TF-Luna LiDAR
335 +)))|Distance signal  strength
365 365  
366 366  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
367 367  
368 -
369 369  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
370 370  
371 -(% style="color:red" %)**Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.**
341 +Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
372 372  
373 -[[image:image-20230512180609-7.png||height="555" width="802"]]
343 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376795715-436.png?rev=1.1||alt="1656376795715-436.png"]]
374 374  
375 -
376 376  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
377 377  
378 -(% style="color:red" %)**Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.**
347 +Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
379 379  
380 -[[image:image-20230610170047-1.png||height="452" width="799"]]
349 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376865561-355.png?rev=1.1||alt="1656376865561-355.png"]]
381 381  
351 +Please use firmware version > 1.6.5 when use MOD=2, in this firmware version, user can use LSn50 v1 to power the ultrasonic sensor directly and with low power consumption.
382 382  
353 +
383 383  ==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
384 384  
385 -
386 386  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
387 387  
388 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
389 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
358 +|=(((
390 390  **Size(bytes)**
391 -)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
392 -|Value|(% style="width:68px" %)(((
393 -ADC1(PA4)
394 -)))|(% style="width:75px" %)(((
395 -ADC2(PA5)
396 -)))|(((
397 -ADC3(PA8)
398 -)))|(((
399 -Digital Interrupt(PB15)
400 -)))|(% style="width:304px" %)(((
401 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
402 -)))|(% style="width:163px" %)(((
403 -Humidity(SHT20 or SHT31)
404 -)))|(% style="width:53px" %)Bat
360 +)))|=**2**|=**2**|=**2**|=**1**|=2|=2|=1
361 +|**Value**|ADC(Pin PA0)|ADC2(PA1)|ADC3 (PA4)|(((
362 +Digital in(PA12)&Digital Interrupt1(PB14)
363 +)))|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor）|Humidity（SHT20 or SHT31)|Bat
405 405  
406 -[[image:image-20230513110214-6.png]]
365 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377431497-975.png?rev=1.1||alt="1656377431497-975.png"]]
407 407  
408 408  
409 409  ==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
410 410  
370 +This mode is supported in firmware version since v1.6.1. Software set to AT+MOD=4
411 411  
412 -This mode has total 11 bytes. As shown below:
372 +Hardware connection is as below,
413 413  
414 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
415 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
416 -|Value|BAT|(% style="width:186px" %)(((
417 -Temperature1(DS18B20)(PC13)
418 -)))|(% style="width:82px" %)(((
419 -ADC(PA4)
420 -)))|(% style="width:210px" %)(((
421 -Digital in(PB15) & Digital Interrupt(PA8) 
422 -)))|(% style="width:191px" %)Temperature2(DS18B20)
423 -(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
374 +**( Note:**
424 424  
425 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
376 +* In hardware version v1.x and v2.0 , R3 & R4 should change from 10k to 4.7k ohm to support the other 2 x DS18B20 probes.
377 +* In hardware version v2.1 no need to change R3 , R4, by default, they are 4.7k ohm already.
426 426  
379 +See [[here>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H1.6A0HardwareChangelog]] for hardware changelog. **) **
427 427  
428 -[[image:image-20230513134006-1.png||height="559" width="736"]]
381 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377461619-156.png?rev=1.1||alt="1656377461619-156.png"]]
429 429  
383 +This mode has total 11 bytes. As shown below:
430 430  
385 +|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
386 +|**Value**|BAT|(((
387 +Temperature1
388 +(DS18B20)
389 +(PB3)
390 +)))|ADC|Digital in & Digital Interrupt|Temperature2
391 +(DS18B20)
392 +(PA9)|Temperature3
393 +(DS18B20)
394 +(PA10)
395 +
396 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
397 +
398 +(% class="wikigeneratedid" %)
399 +=== ===
400 +
431 431  ==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
432 432  
403 +This mode is supported in firmware version since v1.6.2. Please use v1.6.5 firmware version so user no need to use extra LDO for connection.
433 433  
434 -[[image:image-20230512164658-2.png||height="532" width="729"]]
435 435  
406 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378224664-860.png?rev=1.1||alt="1656378224664-860.png"]]
407 +
436 436  Each HX711 need to be calibrated before used. User need to do below two steps:
437 437  
438 -1. Zero calibration. Don't put anything on load cell and run (% style="color:blue" %)**AT+WEIGRE**(%%) to calibrate to Zero gram.
439 -1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run (% style="color:blue" %)**AT+WEIGAP**(%%) to adjust the Calibration Factor.
410 +1. Zero calibration. Don't put anything on load cell and run **AT+WEIGRE** to calibrate to Zero gram.
411 +1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run **AT+WEIGAP** to adjust the Calibration Factor.
440 440  1. (((
441 -Weight has 4 bytes, the unit is g.
442 -
443 -
444 -
413 +Remove the limit of plus or minus 5Kg in mode 5, and expand from 2 bytes to 4 bytes, the unit is g.(Since v1.8.0)
445 445  )))
446 446  
447 447  For example:
448 448  
449 -(% style="color:blue" %)**AT+GETSENSORVALUE =0**
418 +**AT+WEIGAP =403.0**
450 450  
451 451  Response:  Weight is 401 g
452 452  
453 453  Check the response of this command and adjust the value to match the real value for thing.
454 454  
455 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
456 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
424 +|=(((
457 457  **Size(bytes)**
458 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
459 -|Value|BAT|(% style="width:193px" %)(((
460 -Temperature(DS18B20)(PC13)
461 -)))|(% style="width:85px" %)(((
462 -ADC(PA4)
463 -)))|(% style="width:186px" %)(((
464 -Digital in(PB15) & Digital Interrupt(PA8)
465 -)))|(% style="width:100px" %)Weight
426 +)))|=**2**|=**2**|=**2**|=**1**|=**4**|=2
427 +|**Value**|[[Bat>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital Input and Digitak Interrupt>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Weight|Reserved
466 466  
467 467  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
468 468  
431 +(% class="wikigeneratedid" %)
432 +=== ===
469 469  
470 470  ==== 2.3.2.6  MOD~=6 (Counting Mode) ====
471 471  
472 -
473 473  In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
474 474  
475 475  Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
476 476  
477 -[[image:image-20230512181814-9.png||height="543" width="697"]]
440 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378351863-572.png?rev=1.1||alt="1656378351863-572.png"]]
478 478  
442 +**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the LSN50 to avoid this happen.
479 479  
480 -(% style="color:red" %)**Note:** **LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.**
444 +|=**Size(bytes)**|=**2**|=**2**|=**2**|=**1**|=**4**
445 +|**Value**|[[BAT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|(((
446 +[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]
447 +)))|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital in>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Count
481 481  
482 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
483 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
484 -|Value|BAT|(% style="width:256px" %)(((
485 -Temperature(DS18B20)(PC13)
486 -)))|(% style="width:108px" %)(((
487 -ADC(PA4)
488 -)))|(% style="width:126px" %)(((
489 -Digital in(PB15)
490 -)))|(% style="width:145px" %)(((
491 -Count(PA8)
492 -)))
493 -
494 494  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
495 495  
496 496  
497 497  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
498 498  
454 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820140109-3.png?rev=1.1||alt="image-20220820140109-3.png"]]
499 499  
500 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
501 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
456 +|=(((
502 502  **Size(bytes)**
503 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
504 -|Value|BAT|(% style="width:188px" %)(((
505 -Temperature(DS18B20)
506 -(PC13)
507 -)))|(% style="width:83px" %)(((
508 -ADC(PA5)
509 -)))|(% style="width:184px" %)(((
510 -Digital Interrupt1(PA8)
511 -)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
458 +)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
459 +|**Value**|BAT|Temperature(DS18B20)|ADC|(((
460 +Digital in(PA12)&Digital Interrupt1(PB14)
461 +)))|Digital Interrupt2(PB15)|Digital Interrupt3(PA4)|Reserved
512 512  
513 -[[image:image-20230513111203-7.png||height="324" width="975"]]
514 514  
515 -
516 516  ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
517 517  
518 -
519 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
520 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
466 +|=(((
521 521  **Size(bytes)**
522 -)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
523 -|Value|BAT|(% style="width:207px" %)(((
524 -Temperature(DS18B20)
525 -(PC13)
526 -)))|(% style="width:94px" %)(((
527 -ADC1(PA4)
528 -)))|(% style="width:198px" %)(((
529 -Digital Interrupt(PB15)
530 -)))|(% style="width:84px" %)(((
531 -ADC2(PA5)
532 -)))|(% style="width:82px" %)(((
533 -ADC3(PA8)
468 +)))|=**2**|=**2**|=**2**|=**1**|=**2**|=2
469 +|**Value**|BAT|Temperature(DS18B20)|(((
470 +ADC1(PA0)
471 +)))|(((
472 +Digital in
473 +& Digital Interrupt(PB14)
474 +)))|(((
475 +ADC2(PA1)
476 +)))|(((
477 +ADC3(PA4)
534 534  )))
535 535  
536 -[[image:image-20230513111231-8.png||height="335" width="900"]]
480 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823164903-2.png?rev=1.1||alt="image-20220823164903-2.png"]]
537 537  
482 +(% class="wikigeneratedid" %)
483 +=== ===
538 538  
539 539  ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
540 540  
541 -
542 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
543 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
487 +|=(((
544 544  **Size(bytes)**
545 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
546 -|Value|BAT|(((
547 -Temperature
548 -(DS18B20)(PC13)
489 +)))|=**2**|=**2**|=**2**|=**1**|=**2**|=4|=4
490 +|**Value**|BAT|(((
491 +Temperature1(PB3)
549 549  )))|(((
550 -Temperature2
551 -(DS18B20)(PB9)
493 +Temperature2(PA9)
552 552  )))|(((
553 -Digital Interrupt
554 -(PB15)
555 -)))|(% style="width:193px" %)(((
556 -Temperature3
557 -(DS18B20)(PB8)
558 -)))|(% style="width:78px" %)(((
559 -Count1(PA8)
560 -)))|(% style="width:78px" %)(((
561 -Count2(PA4)
495 +Digital in
496 +& Digital Interrupt(PA4)
497 +)))|(((
498 +Temperature3(PA10)
499 +)))|(((
500 +Count1(PB14)
501 +)))|(((
502 +Count2(PB15)
562 562  )))
563 563  
564 -[[image:image-20230513111255-9.png||height="341" width="899"]]
505 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823165322-3.png?rev=1.1||alt="image-20220823165322-3.png"]]
565 565  
566 -(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
507 +**The newly added AT command is issued correspondingly:**
567 567  
568 -(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)**06 00 00 xx**
509 +**~ AT+INTMOD1** ** PB14**  pin：  Corresponding downlink:  **06 00 00 xx**
569 569  
570 -(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)  pin：  Corresponding downlink: (% style="color:#037691" %)**06 00 01 xx**
511 +**~ AT+INTMOD2**  **PB15** pin：  Corresponding downlink:**  06 00 01 xx**
571 571  
572 -(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
513 +**~ AT+INTMOD3**  **PA4**  pin：  Corresponding downlink:  ** 06 00 02 xx**
573 573  
515 +**AT+SETCNT=aa,bb** 
574 574  
575 -(% style="color:blue" %)**AT+SETCNT=aa,bb** 
517 +When AA is 1, set the count of PB14 pin to BB Corresponding downlink：09 01 bb bb bb bb
576 576  
577 -When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
519 +When AA is 2, set the count of PB15 pin to BB Corresponding downlink：09 02 bb bb bb bb
578 578  
579 -When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
521 +=== 2.3.10  ​Decode payload in The Things Network ===
580 580  
581 -
582 -==== 2.3.2.10  MOD~=10 (PWM input capture and output mode，Since firmware v1.2) ====
583 -
584 -In this mode, the uplink can perform PWM input capture, and the downlink can perform PWM output.
585 -
586 -[[It should be noted when using PWM mode.>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/#H2.3.3.12A0PWMMOD]]
587 -
588 -
589 -===== 2.3.2.10.a  Uplink, PWM input capture =====
590 -
591 -[[image:image-20230817172209-2.png||height="439" width="683"]]
592 -
593 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:690px" %)
594 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:135px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**2**
595 -|Value|Bat|(% style="width:191px" %)(((
596 -Temperature(DS18B20)(PC13)
597 -)))|(% style="width:78px" %)(((
598 -ADC(PA4)
599 -)))|(% style="width:135px" %)(((
600 -PWM_Setting
601 -
602 -&Digital Interrupt(PA8)
603 -)))|(% style="width:70px" %)(((
604 -Pulse period
605 -)))|(% style="width:89px" %)(((
606 -Duration of high level
607 -)))
608 -
609 -[[image:image-20230817170702-1.png||height="161" width="1044"]]
610 -
611 -
612 -(% style="color:blue" %)**AT+PWMSET=AA（Default is 0）  ==> Corresponding downlink: 0B AA**
613 -
614 -When AA is 0, the unit of PWM capture time is microsecond. The capture frequency range is between 20HZ and 100000HZ.  
615 -
616 -When AA is 1, the unit of PWM capture time is millisecond.  The capture frequency range is between 5HZ and 250HZ.  
617 -
618 -
619 -===== 2.3.2.10.b  Downlink, PWM output =====
620 -
621 -[[image:image-20230817173800-3.png||height="412" width="685"]]
622 -
623 -Downlink:  (% style="color:#037691" %)**0B xx xx xx yy zz zz**
624 -
625 - xx xx xx is the output frequency, the unit is HZ.
626 -
627 - yy is the duty cycle of the output, the unit is %.
628 -
629 - zz zz is the time delay of the output, the unit is ms.
630 -
631 -
632 -For example, send a downlink command: 0B 00 61 A8 32 13 88, the frequency is 25KHZ, the duty cycle is 50, and the output time is 5 seconds.
633 -
634 -The oscilloscope displays as follows:
635 -
636 -[[image:image-20230817173858-5.png||height="694" width="921"]]
637 -
638 -
639 -=== 2.3.3  ​Decode payload ===
640 -
641 -
642 642  While using TTN V3 network, you can add the payload format to decode the payload.
643 643  
644 644  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
... ... @@ -645,33 +645,41 @@
645 645  
646 646  The payload decoder function for TTN V3 are here:
647 647  
648 -SN50v3-LB TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
529 +LSN50 TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
649 649  
650 650  
651 -==== 2.3.3.1 Battery Info ====
532 +Sensor Data is uplink via FPORT=2
652 652  
534 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
535 +|=(% style="width: 90px;background-color:#D9E2F3" %)(((
536 +**Size(bytes)**
537 +)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
538 +|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
539 +[[Battery>>||anchor="HBattery:"]]
540 +)))|(% style="width:130px" %)(((
541 +[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
542 +)))|(% style="width:91px" %)(((
543 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
544 +)))|(% style="width:103px" %)(((
545 +[[Temperature>>||anchor="HTemperature:"]]
546 +)))|(% style="width:80px" %)(((
547 +[[Humidity>>||anchor="HHumidity:"]]
548 +)))
653 653  
654 -Check the battery voltage for SN50v3-LB.
550 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
655 655  
552 +Sensor Battery Level.
553 +
656 656  Ex1: 0x0B45 = 2885mV
657 657  
658 658  Ex2: 0x0B49 = 2889mV
659 659  
660 660  
661 -==== 2.3.3.2  Temperature (DS18B20) ====
662 662  
560 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
663 663  
664 -If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
562 +**Example**:
665 665  
666 -More DS18B20 can check the [[3 DS18B20 mode>>||anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
667 -
668 -(% style="color:blue" %)**Connection:**
669 -
670 -[[image:image-20230512180718-8.png||height="538" width="647"]]
671 -
672 -
673 -(% style="color:blue" %)**Example**:
674 -
675 675  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
676 676  
677 677  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
... ... @@ -679,251 +679,195 @@
679 679  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
680 680  
681 681  
682 -==== 2.3.3.3 Digital Input ====
571 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
683 683  
684 684  
685 -The digital input for pin PB15,
574 +Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
686 686  
687 -* When PB15 is high, the bit 1 of payload byte 6 is 1.
688 -* When PB15 is low, the bit 1 of payload byte 6 is 0.
689 689  
690 -(% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
691 -(((
692 -When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
577 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
693 693  
694 -(% style="color:red" %)**Note: The maximum voltage input supports 3.6V.**
695 695  
696 -
697 -)))
580 +**Example:**
698 698  
699 -==== 2.3.3.4  Analogue Digital Converter (ADC) ====
582 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
700 700  
584 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
701 701  
702 -The measuring range of the ADC is only about 0.1V to 1.1V The voltage resolution is about 0.24mv.
586 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
703 703  
704 -When the measured output voltage of the sensor is not within the range of 0.1V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
588 +If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
705 705  
706 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
707 707  
591 +== 2.4 Payload Decoder file ==
708 708  
709 -(% style="color:red" %)**Note: If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.**
710 710  
594 +In TTN, use can add a custom payload so it shows friendly reading
711 711  
712 -The position of PA5 on the hardware after **LSN50 v3.3** is changed to the position shown in the figure below, and the collected voltage becomes one-sixth of the original.
596 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
713 713  
714 -[[image:image-20230811113449-1.png||height="370" width="608"]]
598 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
715 715  
716 -==== 2.3.3.5 Digital Interrupt ====
717 717  
601 +== 2.5 Datalog Feature ==
718 718  
719 -Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3-LB will send a packet to the server.
720 720  
721 -(% style="color:blue" %)** Interrupt connection method:**
604 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
722 722  
723 -[[image:image-20230513105351-5.png||height="147" width="485"]]
724 724  
607 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
725 725  
726 -(% style="color:blue" %)**Example to use with door sensor :**
727 727  
728 -The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
610 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
729 729  
730 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
612 +* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
613 +* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
731 731  
732 -When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50v3-LB interrupt interface to detect the status for the door or window.
615 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
733 733  
617 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
734 734  
735 -(% style="color:blue" %)**Below is the installation example:**
619 +=== 2.5.2 Unix TimeStamp ===
736 736  
737 -Fix one piece of the magnetic sensor to the door and connect the two pins to SN50v3-LB as follows:
738 738  
739 -* (((
740 -One pin to SN50v3-LB's PA8 pin
741 -)))
742 -* (((
743 -The other pin to SN50v3-LB's VDD pin
744 -)))
622 +S31x-LB uses Unix TimeStamp format based on
745 745  
746 -Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
624 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
747 747  
748 -Door sensors have two types: (% style="color:blue" %)** NC (Normal close)**(%%) and (% style="color:blue" %)**NO (normal open)**(%%). The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
626 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
749 749  
750 -When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
628 +Below is the converter example
751 751  
752 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
630 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
753 753  
754 -The above photos shows the two parts of the magnetic switch fitted to a door.
632 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
755 755  
756 -The software by default uses the falling edge on the signal line as an interrupt. We need to modify it to accept both the rising edge (0v ~-~-> VCC , door close) and the falling edge (VCC ~-~-> 0v , door open) as the interrupt.
757 757  
758 -The command is:
635 +=== 2.5.3 Set Device Time ===
759 759  
760 -(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/  (more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
761 761  
762 -Below shows some screen captures in TTN V3:
638 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
763 763  
764 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1||alt="1656379339508-835.png"]]
640 +Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
765 765  
642 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
766 766  
767 -In **MOD=1**, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
768 768  
769 -door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
645 +=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
770 770  
771 771  
772 -==== 2.3.3.6 I2C Interface (SHT20 & SHT31) ====
648 +The Datalog uplinks will use below payload format.
773 773  
650 +**Retrieval data payload:**
774 774  
775 -The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
652 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
653 +|=(% style="width: 80px;background-color:#D9E2F3" %)(((
654 +**Size(bytes)**
655 +)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
656 +|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
657 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
658 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
776 776  
777 -We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
660 +**Poll message flag & Ext:**
778 778  
779 -(% style="color:red" %)**Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50v3-LB will be a good reference.**
662 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
780 780  
664 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
781 781  
782 -Below is the connection to SHT20/ SHT31. The connection is as below:
666 +**Poll Message Flag**: 1: This message is a poll message reply.
783 783  
784 -[[image:image-20230610170152-2.png||height="501" width="846"]]
668 +* Poll Message Flag is set to 1.
785 785  
670 +* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
786 786  
787 -The device will be able to get the I2C sensor data now and upload to IoT Server.
672 +For example, in US915 band, the max payload for different DR is:
788 788  
789 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
674 +**a) DR0:** max is 11 bytes so one entry of data
790 790  
791 -Convert the read byte to decimal and divide it by ten.
676 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
792 792  
793 -**Example:**
678 +**c) DR2:** total payload includes 11 entries of data
794 794  
795 -Temperature:  Read:0116(H) = 278(D)  Value:  278 /10=27.8℃;
680 +**d) DR3: **total payload includes 22 entries of data.
796 796  
797 -Humidity:    Read:0248(H)=584(D)  Value:  584 / 10=58.4, So 58.4%
682 +If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
798 798  
799 -If you want to use other I2C device, please refer the SHT20 part source code as reference.
800 800  
801 -
802 -==== 2.3.3.7  ​Distance Reading ====
803 -
804 -
805 -Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
806 -
807 -
808 -==== 2.3.3.8 Ultrasonic Sensor ====
809 -
810 -
811 -This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
812 -
813 -The SN50v3-LB detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
814 -
815 -The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
816 -
817 -The picture below shows the connection:
818 -
819 -[[image:image-20230512173903-6.png||height="596" width="715"]]
820 -
821 -
822 -Connect to the SN50v3-LB and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
823 -
824 -The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
825 -
826 826  **Example:**
827 827  
828 -Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
687 +If S31x-LB has below data inside Flash:
829 829  
689 +[[image:1682646494051-944.png]]
830 830  
831 -==== 2.3.3.9  Battery Output - BAT pin ====
691 +If user sends below downlink command: 3160065F9760066DA705
832 832  
693 +Where : Start time: 60065F97 = time 21/1/19 04:27:03
833 833  
834 -The BAT pin of SN50v3-LB is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
695 + Stop time: 60066DA7= time 21/1/19 05:27:03
835 835  
836 836  
837 -==== 2.3.3.10  +5V Output ====
698 +**S31x-LB will uplink this payload.**
838 838  
700 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
839 839  
840 -SN50v3-LB will enable +5V output before all sampling and disable the +5v after all sampling. 
702 +(((
703 +__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
704 +)))
841 841  
842 -The 5V output time can be controlled by AT Command.
706 +(((
707 +Where the first 11 bytes is for the first entry:
708 +)))
843 843  
844 -(% style="color:blue" %)**AT+5VT=1000**
710 +(((
711 +7FFF089801464160065F97
712 +)))
845 845  
846 -Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
714 +(((
715 +**Ext sensor data**=0x7FFF/100=327.67
716 +)))
847 847  
848 -By default the **AT+5VT=500**. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
718 +(((
719 +**Temp**=0x088E/100=22.00
720 +)))
849 849  
850 -
851 -==== 2.3.3.11  BH1750 Illumination Sensor ====
852 -
853 -
854 -MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
855 -
856 -[[image:image-20230512172447-4.png||height="416" width="712"]]
857 -
858 -
859 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
860 -
861 -
862 -==== 2.3.3.12  PWM MOD ====
863 -
864 -
865 -* (((
866 -The maximum voltage that the SDA pin of SN50v3 can withstand is 3.6V, and it cannot exceed this voltage value, otherwise the chip may be burned.
722 +(((
723 +**Hum**=0x014B/10=32.6
867 867  )))
868 -* (((
869 -If the PWM pin connected to the SDA pin cannot maintain a high level when it is not working, you need to remove the resistor R2 or replace it with a resistor with a larger resistance, otherwise a sleep current of about 360uA will be generated. The position of the resistor is shown in the figure below:
870 -)))
871 871  
872 - [[image:image-20230817183249-3.png||height="320" width="417"]]
873 -
874 -* (((
875 -The signal captured by the input should preferably be processed by hardware filtering and then connected in. The software processing method is to capture four values, discard the first captured value, and then take the middle value of the second, third, and fourth captured values.
726 +(((
727 +**poll message flag & Ext**=0x41,means reply data,Ext=1
876 876  )))
877 -* (((
878 -Since the device can only detect a pulse period of 50ms when AT+PWMSET=0 (counting in microseconds), it is necessary to change the value of PWMSET according to the frequency of input capture.
879 879  
880 -
730 +(((
731 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
881 881  )))
882 882  
883 -==== 2.3.3.13  Working MOD ====
884 884  
735 +(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
885 885  
886 -The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
737 +== 2.6 Temperature Alarm Feature ==
887 887  
888 -User can use the 3^^rd^^ ~~ 7^^th^^  bit of this byte to see the working mod:
889 889  
890 -Case 7^^th^^ Byte >> 2 & 0x1f:
740 +S31x-LB work flow with Alarm feature.
891 891  
892 -* 0: MOD1
893 -* 1: MOD2
894 -* 2: MOD3
895 -* 3: MOD4
896 -* 4: MOD5
897 -* 5: MOD6
898 -* 6: MOD7
899 -* 7: MOD8
900 -* 8: MOD9
901 -* 9: MOD10
902 902  
903 -== 2.4 Payload Decoder file ==
743 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
904 904  
905 905  
906 -In TTN, use can add a custom payload so it shows friendly reading
746 +== 2.7 Frequency Plans ==
907 907  
908 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
909 909  
910 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
749 +The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
911 911  
912 -
913 -== 2.5 Frequency Plans ==
914 -
915 -
916 -The SN50v3-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
917 -
918 918  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
919 919  
920 920  
921 -= 3. Configure SN50v3-LB =
754 += 3. Configure S31x-LB =
922 922  
923 923  == 3.1 Configure Methods ==
924 924  
925 925  
926 -SN50v3-LB supports below configure method:
759 +S31x-LB supports below configure method:
927 927  
928 928  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
929 929  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -942,10 +942,10 @@
942 942  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
943 943  
944 944  
945 -== 3.3 Commands special design for SN50v3-LB ==
778 +== 3.3 Commands special design for S31x-LB ==
946 946  
947 947  
948 -These commands only valid for SN50v3-LB, as below:
781 +These commands only valid for S31x-LB, as below:
949 949  
950 950  
951 951  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -956,7 +956,7 @@
956 956  (% style="color:blue" %)**AT Command: AT+TDC**
957 957  
958 958  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
959 -|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
792 +|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
960 960  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
961 961  30000
962 962  OK
... ... @@ -979,155 +979,115 @@
979 979  === 3.3.2 Get Device Status ===
980 980  
981 981  
982 -Send a LoRaWAN downlink to ask the device to send its status.
815 +Send a LoRaWAN downlink to ask device send Alarm settings.
983 983  
984 -(% style="color:blue" %)**Downlink Payload: 0x26 01**
817 +(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
985 985  
986 -Sensor will upload Device Status via **FPORT=5**. See payload section for detail.
819 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
987 987  
988 988  
989 -=== 3.3.3 Set Interrupt Mode ===
822 +=== 3.3.3 Set Temperature Alarm Threshold ===
990 990  
824 +* (% style="color:blue" %)**AT Command:**
991 991  
992 -Feature, Set Interrupt mode for GPIO_EXIT.
826 +(% style="color:#037691" %)**AT+SHTEMP=min,max**
993 993  
994 -(% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
828 +* When min=0, and max≠0, Alarm higher than max
829 +* When min≠0, and max=0, Alarm lower than min
830 +* When min≠0 and max≠0, Alarm higher than max or lower than min
995 995  
996 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
997 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
998 -|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
999 -0
1000 -OK
1001 -the mode is 0 =Disable Interrupt
1002 -)))
1003 -|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
1004 -Set Transmit Interval
1005 -0. (Disable Interrupt),
1006 -~1. (Trigger by rising and falling edge)
1007 -2. (Trigger by falling edge)
1008 -3. (Trigger by rising edge)
1009 -)))|(% style="width:157px" %)OK
1010 -|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
1011 -Set Transmit Interval
1012 -trigger by rising edge.
1013 -)))|(% style="width:157px" %)OK
1014 -|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
832 +Example:
1015 1015  
1016 -(% style="color:blue" %)**Downlink Command: 0x06**
834 + AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
1017 1017  
1018 -Format: Command Code (0x06) followed by 3 bytes.
836 +* (% style="color:blue" %)**Downlink Payload:**
1019 1019  
1020 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
838 +(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
1021 1021  
1022 -* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
1023 -* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
1024 -* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
1025 -* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
840 +(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
1026 1026  
1027 -=== 3.3.4 Set Power Output Duration ===
1028 1028  
843 +=== 3.3.4 Set Humidity Alarm Threshold ===
1029 1029  
1030 -Control the output duration 5V . Before each sampling, device will
845 +* (% style="color:blue" %)**AT Command:**
1031 1031  
1032 -~1. first enable the power output to external sensor,
847 +(% style="color:#037691" %)**AT+SHHUM=min,max**
1033 1033  
1034 -2. keep it on as per duration, read sensor value and construct uplink payload
849 +* When min=0, and max≠0, Alarm higher than max
850 +* When min≠0, and max=0, Alarm lower than min
851 +* When min≠0 and max≠0, Alarm higher than max or lower than min
1035 1035  
1036 -3. final, close the power output.
853 +Example:
1037 1037  
1038 -(% style="color:blue" %)**AT Command: AT+5VT**
855 + AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
1039 1039  
1040 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1041 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1042 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
1043 -500(default)
1044 -OK
1045 -)))
1046 -|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
1047 -Close after a delay of 1000 milliseconds.
1048 -)))|(% style="width:157px" %)OK
857 +* (% style="color:blue" %)**Downlink Payload:**
1049 1049  
1050 -(% style="color:blue" %)**Downlink Command: 0x07**
859 +(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
1051 1051  
1052 -Format: Command Code (0x07) followed by 2 bytes.
861 +(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
1053 1053  
1054 -The first and second bytes are the time to turn on.
1055 1055  
1056 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1057 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
864 +=== 3.3.5 Set Alarm Interval ===
1058 1058  
1059 -=== 3.3.5 Set Weighing parameters ===
866 +The shortest time of two Alarm packet. (unit: min)
1060 1060  
868 +* (% style="color:blue" %)**AT Command:**
1061 1061  
1062 -Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
870 +(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
1063 1063  
1064 -(% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
872 +* (% style="color:blue" %)**Downlink Payload:**
1065 1065  
1066 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1067 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1068 -|(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
1069 -|(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
1070 -|(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
874 +(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
1071 1071  
1072 -(% style="color:blue" %)**Downlink Command: 0x08**
1073 1073  
1074 -Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
877 +=== 3.3.6 Get Alarm settings ===
1075 1075  
1076 -Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
1077 1077  
1078 -The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
880 +Send a LoRaWAN downlink to ask device send Alarm settings.
1079 1079  
1080 -* Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
1081 -* Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
1082 -* Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
882 +* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
1083 1083  
1084 -=== 3.3.6 Set Digital pulse count value ===
884 +**Example:**
1085 1085  
886 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
1086 1086  
1087 -Feature: Set the pulse count value.
1088 1088  
1089 -Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
889 +**Explain:**
1090 1090  
1091 -(% style="color:blue" %)**AT Command: AT+SETCNT**
891 +* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
1092 1092  
1093 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1094 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1095 -|(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
1096 -|(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
893 +=== 3.3.7 Set Interrupt Mode ===
1097 1097  
1098 -(% style="color:blue" %)**Downlink Command: 0x09**
1099 1099  
1100 -Format: Command Code (0x09) followed by 5 bytes.
896 +Feature, Set Interrupt mode for GPIO_EXIT.
1101 1101  
1102 -The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
898 +(% style="color:blue" %)**AT Command: AT+INTMOD**
1103 1103  
1104 -* Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1105 -* Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1106 -
1107 -=== 3.3.7 Set Workmode ===
1108 -
1109 -
1110 -Feature: Switch working mode.
1111 -
1112 -(% style="color:blue" %)**AT Command: AT+MOD**
1113 -
1114 1114  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1115 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1116 -|(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
901 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
902 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
903 +0
1117 1117  OK
905 +the mode is 0 =Disable Interrupt
1118 1118  )))
1119 -|(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1120 -OK
1121 -Attention:Take effect after ATZ
1122 -)))
907 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
908 +Set Transmit Interval
909 +0. (Disable Interrupt),
910 +~1. (Trigger by rising and falling edge)
911 +2. (Trigger by falling edge)
912 +3. (Trigger by rising edge)
913 +)))|(% style="width:157px" %)OK
1123 1123  
1124 -(% style="color:blue" %)**Downlink Command: 0x0A**
915 +(% style="color:blue" %)**Downlink Command: 0x06**
1125 1125  
1126 -Format: Command Code (0x0A) followed by 1 bytes.
917 +Format: Command Code (0x06) followed by 3 bytes.
1127 1127  
1128 -* Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1129 -* Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
919 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1130 1130  
921 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
922 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
923 +
1131 1131  = 4. Battery & Power Consumption =
1132 1132  
1133 1133  
... ... @@ -1140,43 +1140,24 @@
1140 1140  
1141 1141  
1142 1142  (% class="wikigeneratedid" %)
1143 -**User can change firmware SN50v3-LB to:**
936 +User can change firmware SN50v3-LB to:
1144 1144  
1145 1145  * Change Frequency band/ region.
1146 1146  * Update with new features.
1147 1147  * Fix bugs.
1148 1148  
1149 -**Firmware and changelog can be downloaded from :** **[[Firmware download link>>https://www.dropbox.com/sh/4rov7bcp6u28exp/AACt-wAySd4si5AXi8DBmvSca?dl=0]]**
942 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
1150 1150  
1151 -**Methods to Update Firmware:**
1152 1152  
1153 -* (Recommanded way) OTA firmware update via wireless: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1154 -* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
945 +Methods to Update Firmware:
1155 1155  
947 +* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
948 +* Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
949 +
1156 1156  = 6. FAQ =
1157 1157  
1158 -== 6.1 Where can i find source code of SN50v3-LB? ==
1159 1159  
1160 1160  
1161 -* **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1162 -* **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1163 -
1164 -== 6.2 How to generate PWM Output in SN50v3-LB? ==
1165 -
1166 -
1167 -See this document: **[[Generate PWM Output on SN50v3>>https://www.dropbox.com/scl/fi/r3trcet2knujg40w0mgyn/Generate-PWM-Output-on-SN50v3.pdf?rlkey=rxsgmrhhrv62iiiwjq9sv10bn&dl=0]]**.
1168 -
1169 -
1170 -== 6.3 How to put several sensors to a SN50v3-LB? ==
1171 -
1172 -
1173 -When we want to put several sensors to A SN50v3-LB, the waterproof at the grand connector will become an issue. User can try to exchange the grand connector to below type.
1174 -
1175 -[[Reference Supplier>>https://www.yscableglands.com/cable-glands/nylon-cable-glands/cable-gland-rubber-seal.html]].
1176 -
1177 -[[image:image-20230810121434-1.png||height="242" width="656"]]
1178 -
1179 -
1180 1180  = 7. Order Info =
1181 1181  
1182 1182  
... ... @@ -1202,7 +1202,6 @@
1202 1202  
1203 1203  = 8. ​Packing Info =
1204 1204  
1205 -
1206 1206  (% style="color:#037691" %)**Package Includes**:
1207 1207  
1208 1208  * SN50v3-LB LoRaWAN Generic Node
... ... @@ -1218,5 +1218,4 @@
1218 1218  
1219 1219  
1220 1220  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1221 -
1222 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
994 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230512163509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 MB
Content
image-20230512164658-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 MB
Content
image-20230512170701-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.5 MB
Content
image-20230512172447-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 MB
Content
image-20230512173758-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 MB
Content
image-20230512173903-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20230512180609-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20230512180718-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20230512181814-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.2 MB
Content
image-20230513084523-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -611.3 KB
Content
image-20230513102034-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -607.1 KB
Content
image-20230513103633-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -595.5 KB
Content
image-20230513105207-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -384.7 KB
Content
image-20230513105351-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.6 KB
Content
image-20230513110214-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -172.7 KB
Content
image-20230513111203-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -79.9 KB
Content
image-20230513111231-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20230513111255-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -70.4 KB
Content
image-20230513134006-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 MB
Content
image-20230515135611-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -948.0 KB
Content
image-20230610162852-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -695.7 KB
Content
image-20230610163213-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -695.4 KB
Content
image-20230610170047-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -444.9 KB
Content
image-20230610170152-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -359.5 KB
Content
image-20230810121434-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -137.3 KB
Content
image-20230811113449-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -973.1 KB
Content
image-20230817170702-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -39.6 KB
Content
image-20230817172209-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 MB
Content
image-20230817173800-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20230817173830-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -508.5 KB
Content
image-20230817173858-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.6 MB
Content
image-20230817183137-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -137.1 KB
Content
image-20230817183218-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -137.1 KB
Content
image-20230817183249-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -948.6 KB
Content
image-20230818092200-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -98.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0