Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 13.1 >
edited by Edwin Chen
on 2023/05/11 23:11
To version < 43.53 >
edited by Xiaoling
on 2023/05/16 16:13
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB User Manual
1 +SN50v3-LB LoRaWAN Sensor Node User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,4 +1,5 @@
1 -[[image:image-20230511201248-1.png||height="403" width="489"]]
1 +(% style="text-align:center" %)
2 +[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
2 2  
3 3  
4 4  
... ... @@ -15,23 +15,21 @@
15 15  
16 16  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
17 17  
19 +
18 18  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
19 19  
20 -
21 21  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
22 22  
23 -
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 -
27 27  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
28 28  
29 -
30 30  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
31 31  
32 32  
33 33  == 1.2 ​Features ==
34 34  
33 +
35 35  * LoRaWAN 1.0.3 Class A
36 36  * Ultra-low power consumption
37 37  * Open-Source hardware/software
... ... @@ -42,8 +42,11 @@
42 42  * Downlink to change configure
43 43  * 8500mAh Battery for long term use
44 44  
44 +
45 +
45 45  == 1.3 Specification ==
46 46  
48 +
47 47  (% style="color:#037691" %)**Common DC Characteristics:**
48 48  
49 49  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -78,8 +78,11 @@
78 78  * Sleep Mode: 5uA @ 3.3v
79 79  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
80 80  
83 +
84 +
81 81  == 1.4 Sleep mode and working mode ==
82 82  
87 +
83 83  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
84 84  
85 85  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -104,6 +104,8 @@
104 104  )))
105 105  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
106 106  
112 +
113 +
107 107  == 1.6 BLE connection ==
108 108  
109 109  
... ... @@ -122,7 +122,7 @@
122 122  == 1.7 Pin Definitions ==
123 123  
124 124  
125 -[[image:image-20230511203450-2.png||height="443" width="785"]]
132 +[[image:image-20230513102034-2.png]]
126 126  
127 127  
128 128  == 1.8 Mechanical ==
... ... @@ -137,6 +137,7 @@
137 137  
138 138  == Hole Option ==
139 139  
147 +
140 140  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
141 141  
142 142  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -289,237 +289,302 @@
289 289  1. By default, the device will send an uplink message every 20 minutes.
290 290  
291 291  
300 +
292 292  ==== 2.3.2.1  MOD~=1 (Default Mode) ====
293 293  
303 +
294 294  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
295 295  
296 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
297 -|**Value**|Bat|Temperature(DS18B20)|ADC|Digital in & Digital Interrupt|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor|Humidity（SHT20)
306 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
307 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**2**
308 +|**Value**|Bat|(% style="width:191px" %)(((
309 +Temperature(DS18B20)(PC13)
310 +)))|(% style="width:78px" %)(((
311 +ADC(PA4)
312 +)))|(% style="width:216px" %)(((
313 +Digital in(PB15)&Digital Interrupt(PA8)
314 +)))|(% style="width:308px" %)(((
315 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
316 +)))|(% style="width:154px" %)(((
317 +Humidity(SHT20 or SHT31)
318 +)))
298 298  
299 299  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
300 300  
301 301  
323 +
302 302  ==== 2.3.2.2  MOD~=2 (Distance Mode) ====
303 303  
326 +
304 304  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
305 305  
306 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
307 -|**Value**|BAT|(((
308 -Temperature(DS18B20)
309 -)))|ADC|Digital in & Digital Interrupt|(((
310 -Distance measure by:
311 -1) LIDAR-Lite V3HP
312 -Or
313 -2) Ultrasonic Sensor
314 -)))|Reserved
329 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
330 +|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
331 +|**Value**|BAT|(% style="width:196px" %)(((
332 +Temperature(DS18B20)(PC13)
333 +)))|(% style="width:87px" %)(((
334 +ADC(PA4)
335 +)))|(% style="width:189px" %)(((
336 +Digital in(PB15) & Digital Interrupt(PA8)
337 +)))|(% style="width:208px" %)(((
338 +Distance measure by:1) LIDAR-Lite V3HP
339 +Or 2) Ultrasonic Sensor
340 +)))|(% style="width:117px" %)Reserved
315 315  
316 316  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
317 317  
318 -**Connection of LIDAR-Lite V3HP:**
319 319  
320 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324581381-162.png?rev=1.1||alt="1656324581381-162.png"]]
345 +(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
321 321  
322 -**Connection to Ultrasonic Sensor:**
347 +[[image:image-20230512173758-5.png||height="563" width="712"]]
323 323  
324 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324598488-204.png?rev=1.1||alt="1656324598488-204.png"]]
325 325  
350 +(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
351 +
352 +Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
353 +
354 +[[image:image-20230512173903-6.png||height="596" width="715"]]
355 +
356 +
326 326  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
327 327  
328 -|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
329 -|**Value**|BAT|(((
330 -Temperature(DS18B20)
331 -)))|Digital in & Digital Interrupt|ADC|(((
359 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
360 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
361 +|**Value**|BAT|(% style="width:183px" %)(((
362 +Temperature(DS18B20)(PC13)
363 +)))|(% style="width:173px" %)(((
364 +Digital in(PB15) & Digital Interrupt(PA8)
365 +)))|(% style="width:84px" %)(((
366 +ADC(PA4)
367 +)))|(% style="width:323px" %)(((
332 332  Distance measure by:1)TF-Mini plus LiDAR
333 333  Or 
334 334  2) TF-Luna LiDAR
335 -)))|Distance signal  strength
371 +)))|(% style="width:188px" %)Distance signal  strength
336 336  
337 337  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
338 338  
375 +
339 339  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
340 340  
341 -Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
378 +Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
342 342  
343 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376795715-436.png?rev=1.1||alt="1656376795715-436.png"]]
380 +[[image:image-20230512180609-7.png||height="555" width="802"]]
344 344  
382 +
345 345  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
346 346  
347 -Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
385 +Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
348 348  
349 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376865561-355.png?rev=1.1||alt="1656376865561-355.png"]]
387 +[[image:image-20230513105207-4.png||height="469" width="802"]]
350 350  
351 -Please use firmware version > 1.6.5 when use MOD=2, in this firmware version, user can use LSn50 v1 to power the ultrasonic sensor directly and with low power consumption.
352 352  
353 -
354 354  ==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
355 355  
392 +
356 356  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
357 357  
358 -|=(((
395 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
396 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
359 359  **Size(bytes)**
360 -)))|=**2**|=**2**|=**2**|=**1**|=2|=2|=1
361 -|**Value**|ADC(Pin PA0)|ADC2(PA1)|ADC3 (PA4)|(((
362 -Digital in(PA12)&Digital Interrupt1(PB14)
363 -)))|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor）|Humidity（SHT20 or SHT31)|Bat
398 +)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 140px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
399 +|**Value**|(% style="width:68px" %)(((
400 +ADC1(PA4)
401 +)))|(% style="width:75px" %)(((
402 +ADC2(PA5)
403 +)))|(((
404 +ADC3(PA8)
405 +)))|(((
406 +Digital Interrupt(PB15)
407 +)))|(% style="width:304px" %)(((
408 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
409 +)))|(% style="width:163px" %)(((
410 +Humidity(SHT20 or SHT31)
411 +)))|(% style="width:53px" %)Bat
364 364  
365 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377431497-975.png?rev=1.1||alt="1656377431497-975.png"]]
413 +[[image:image-20230513110214-6.png]]
366 366  
367 367  
368 368  ==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
369 369  
370 -This mode is supported in firmware version since v1.6.1. Software set to AT+MOD=4
371 371  
372 -Hardware connection is as below,
373 -
374 -**( Note:**
375 -
376 -* In hardware version v1.x and v2.0 , R3 & R4 should change from 10k to 4.7k ohm to support the other 2 x DS18B20 probes.
377 -* In hardware version v2.1 no need to change R3 , R4, by default, they are 4.7k ohm already.
378 -
379 -See [[here>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H1.6A0HardwareChangelog]] for hardware changelog. **) **
380 -
381 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377461619-156.png?rev=1.1||alt="1656377461619-156.png"]]
382 -
383 383  This mode has total 11 bytes. As shown below:
384 384  
385 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
386 -|**Value**|BAT|(((
387 -Temperature1
388 -(DS18B20)
389 -(PB3)
390 -)))|ADC|Digital in & Digital Interrupt|Temperature2
391 -(DS18B20)
392 -(PA9)|Temperature3
393 -(DS18B20)
394 -(PA10)
421 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
422 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
423 +|**Value**|BAT|(% style="width:186px" %)(((
424 +Temperature1(DS18B20)(PC13)
425 +)))|(% style="width:82px" %)(((
426 +ADC(PA4)
427 +)))|(% style="width:210px" %)(((
428 +Digital in(PB15) & Digital Interrupt(PA8) 
429 +)))|(% style="width:191px" %)Temperature2(DS18B20)
430 +(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
395 395  
396 396  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
397 397  
398 -(% class="wikigeneratedid" %)
399 -=== ===
434 +[[image:image-20230513134006-1.png||height="559" width="736"]]
400 400  
401 -==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
402 402  
403 -This mode is supported in firmware version since v1.6.2. Please use v1.6.5 firmware version so user no need to use extra LDO for connection.
404 404  
438 +==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
405 405  
406 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378224664-860.png?rev=1.1||alt="1656378224664-860.png"]]
407 407  
441 +[[image:image-20230512164658-2.png||height="532" width="729"]]
442 +
408 408  Each HX711 need to be calibrated before used. User need to do below two steps:
409 409  
410 410  1. Zero calibration. Don't put anything on load cell and run **AT+WEIGRE** to calibrate to Zero gram.
411 411  1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run **AT+WEIGAP** to adjust the Calibration Factor.
412 412  1. (((
413 -Remove the limit of plus or minus 5Kg in mode 5, and expand from 2 bytes to 4 bytes, the unit is g.(Since v1.8.0)
448 +Weight has 4 bytes, the unit is g.
449 +
450 +
451 +
414 414  )))
415 415  
416 416  For example:
417 417  
418 -**AT+WEIGAP =403.0**
456 +**AT+GETSENSORVALUE =0**
419 419  
420 420  Response:  Weight is 401 g
421 421  
422 422  Check the response of this command and adjust the value to match the real value for thing.
423 423  
424 -|=(((
462 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
463 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
425 425  **Size(bytes)**
426 -)))|=**2**|=**2**|=**2**|=**1**|=**4**|=2
427 -|**Value**|[[Bat>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital Input and Digitak Interrupt>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Weight|Reserved
465 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
466 +|**Value**|BAT|(% style="width:193px" %)(((
467 +Temperature(DS18B20)
468 +(PC13)
469 +)))|(% style="width:85px" %)(((
470 +ADC(PA4)
471 +)))|(% style="width:186px" %)(((
472 +Digital in(PB15) &
473 +Digital Interrupt(PA8)
474 +)))|(% style="width:100px" %)Weight
428 428  
429 429  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
430 430  
431 -(% class="wikigeneratedid" %)
432 -=== ===
433 433  
479 +
434 434  ==== 2.3.2.6  MOD~=6 (Counting Mode) ====
435 435  
482 +
436 436  In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
437 437  
438 438  Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
439 439  
440 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378351863-572.png?rev=1.1||alt="1656378351863-572.png"]]
487 +[[image:image-20230512181814-9.png||height="543" width="697"]]
441 441  
442 -**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the LSN50 to avoid this happen.
443 443  
444 -|=**Size(bytes)**|=**2**|=**2**|=**2**|=**1**|=**4**
445 -|**Value**|[[BAT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|(((
446 -[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]
447 -)))|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital in>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Count
490 +(% style="color:red" %)**Note:** **LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.**
448 448  
492 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
493 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 220px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
494 +|**Value**|BAT|(% style="width:256px" %)(((
495 +Temperature(DS18B20)(PC13)
496 +)))|(% style="width:108px" %)(((
497 +ADC(PA4)
498 +)))|(% style="width:126px" %)(((
499 +Digital in(PB15)
500 +)))|(% style="width:145px" %)(((
501 +Count(PA8)
502 +)))
503 +
449 449  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
450 450  
451 451  
507 +
452 452  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
453 453  
454 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820140109-3.png?rev=1.1||alt="image-20220820140109-3.png"]]
455 455  
456 -|=(((
511 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
512 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
457 457  **Size(bytes)**
458 -)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
459 -|**Value**|BAT|Temperature(DS18B20)|ADC|(((
460 -Digital in(PA12)&Digital Interrupt1(PB14)
461 -)))|Digital Interrupt2(PB15)|Digital Interrupt3(PA4)|Reserved
514 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
515 +|**Value**|BAT|(% style="width:188px" %)(((
516 +Temperature(DS18B20)
517 +(PC13)
518 +)))|(% style="width:83px" %)(((
519 +ADC(PA5)
520 +)))|(% style="width:184px" %)(((
521 +Digital Interrupt1(PA8)
522 +)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
462 462  
524 +[[image:image-20230513111203-7.png||height="324" width="975"]]
463 463  
526 +
464 464  ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
465 465  
466 -|=(((
529 +
530 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
531 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
467 467  **Size(bytes)**
468 -)))|=**2**|=**2**|=**2**|=**1**|=**2**|=2
469 -|**Value**|BAT|Temperature(DS18B20)|(((
470 -ADC1(PA0)
471 -)))|(((
472 -Digital in
473 -& Digital Interrupt(PB14)
474 -)))|(((
475 -ADC2(PA1)
476 -)))|(((
477 -ADC3(PA4)
533 +)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
534 +|**Value**|BAT|(% style="width:207px" %)(((
535 +Temperature(DS18B20)
536 +(PC13)
537 +)))|(% style="width:94px" %)(((
538 +ADC1(PA4)
539 +)))|(% style="width:198px" %)(((
540 +Digital Interrupt(PB15)
541 +)))|(% style="width:84px" %)(((
542 +ADC2(PA5)
543 +)))|(% style="width:82px" %)(((
544 +ADC3(PA8)
478 478  )))
479 479  
480 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823164903-2.png?rev=1.1||alt="image-20220823164903-2.png"]]
547 +[[image:image-20230513111231-8.png||height="335" width="900"]]
481 481  
482 -(% class="wikigeneratedid" %)
483 -=== ===
484 484  
485 485  ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
486 486  
487 -|=(((
552 +
553 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
554 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
488 488  **Size(bytes)**
489 -)))|=**2**|=**2**|=**2**|=**1**|=**2**|=4|=4
556 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
490 490  |**Value**|BAT|(((
491 -Temperature1(PB3)
558 +Temperature1(DS18B20)
559 +(PC13)
492 492  )))|(((
493 -Temperature2(PA9)
561 +Temperature2(DS18B20)
562 +(PB9)
494 494  )))|(((
495 -Digital in
496 -& Digital Interrupt(PA4)
497 -)))|(((
498 -Temperature3(PA10)
499 -)))|(((
500 -Count1(PB14)
501 -)))|(((
502 -Count2(PB15)
564 +Digital Interrupt
565 +(PB15)
566 +)))|(% style="width:193px" %)(((
567 +Temperature3(DS18B20)
568 +(PB8)
569 +)))|(% style="width:78px" %)(((
570 +Count1(PA8)
571 +)))|(% style="width:78px" %)(((
572 +Count2(PA4)
503 503  )))
504 504  
505 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823165322-3.png?rev=1.1||alt="image-20220823165322-3.png"]]
575 +[[image:image-20230513111255-9.png||height="341" width="899"]]
506 506  
507 -**The newly added AT command is issued correspondingly:**
577 +(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
508 508  
509 -**~ AT+INTMOD1** ** PB14**  pin：  Corresponding downlink:  **06 00 00 xx**
579 +(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)**06 00 00 xx**
510 510  
511 -**~ AT+INTMOD2**  **PB15** pin：  Corresponding downlink:**  06 00 01 xx**
581 +(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)  pin：  Corresponding downlink: (% style="color:#037691" %)**06 00 01 xx**
512 512  
513 -**~ AT+INTMOD3**  **PA4**  pin：  Corresponding downlink:  ** 06 00 02 xx**
583 +(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
514 514  
515 -**AT+SETCNT=aa,bb** 
516 516  
517 -When AA is 1, set the count of PB14 pin to BB Corresponding downlink：09 01 bb bb bb bb
586 +(% style="color:blue" %)**AT+SETCNT=aa,bb** 
518 518  
519 -When AA is 2, set the count of PB15 pin to BB Corresponding downlink：09 02 bb bb bb bb
588 +When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
520 520  
521 -=== 2.3.10  ​Decode payload in The Things Network ===
590 +When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
522 522  
592 +
593 +=== 2.3.3  ​Decode payload ===
594 +
595 +
523 523  While using TTN V3 network, you can add the payload format to decode the payload.
524 524  
525 525  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
... ... @@ -526,41 +526,33 @@
526 526  
527 527  The payload decoder function for TTN V3 are here:
528 528  
529 -LSN50 TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
602 +SN50v3 TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
530 530  
531 531  
532 -Sensor Data is uplink via FPORT=2
605 +==== 2.3.3.1 Battery Info ====
533 533  
534 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
535 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
536 -**Size(bytes)**
537 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
538 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
539 -[[Battery>>||anchor="HBattery:"]]
540 -)))|(% style="width:130px" %)(((
541 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
542 -)))|(% style="width:91px" %)(((
543 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
544 -)))|(% style="width:103px" %)(((
545 -[[Temperature>>||anchor="HTemperature:"]]
546 -)))|(% style="width:80px" %)(((
547 -[[Humidity>>||anchor="HHumidity:"]]
548 -)))
549 549  
550 -==== (% style="color:#4472c4" %)**Battery**(%%) ====
608 +Check the battery voltage for SN50v3.
551 551  
552 -Sensor Battery Level.
553 -
554 554  Ex1: 0x0B45 = 2885mV
555 555  
556 556  Ex2: 0x0B49 = 2889mV
557 557  
558 558  
615 +==== 2.3.3.2  Temperature (DS18B20) ====
559 559  
560 -==== (% style="color:#4472c4" %)**Temperature**(%%) ====
561 561  
562 -**Example**:
618 +If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
563 563  
620 +More DS18B20 can check the [[3 DS18B20 mode>>||anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
621 +
622 +(% style="color:blue" %)**Connection:**
623 +
624 +[[image:image-20230512180718-8.png||height="538" width="647"]]
625 +
626 +
627 +(% style="color:blue" %)**Example**:
628 +
564 564  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
565 565  
566 566  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
... ... @@ -568,200 +568,232 @@
568 568  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
569 569  
570 570  
571 -==== (% style="color:#4472c4" %)**Humidity**(%%) ====
636 +==== 2.3.3.3 Digital Input ====
572 572  
573 573  
574 -Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
639 +The digital input for pin PB15,
575 575  
641 +* When PB15 is high, the bit 1 of payload byte 6 is 1.
642 +* When PB15 is low, the bit 1 of payload byte 6 is 0.
576 576  
577 -==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
644 +(% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
645 +(((
646 +When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
578 578  
648 +(% style="color:red" %)**Note: The maximum voltage input supports 3.6V.**
579 579  
580 -**Example:**
650 +
651 +)))
581 581  
582 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
653 +==== 2.3.3.4  Analogue Digital Converter (ADC) ====
583 583  
584 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
585 585  
586 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
656 +The measuring range of the ADC is only about 0V to 1.1V The voltage resolution is about 0.24mv.
587 587  
588 -If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
658 +When the measured output voltage of the sensor is not within the range of 0V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
589 589  
660 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
590 590  
591 -== 2.4 Payload Decoder file ==
662 +(% style="color:red" %)**Note: If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.**
592 592  
593 593  
594 -In TTN, use can add a custom payload so it shows friendly reading
665 +==== 2.3.3.5 Digital Interrupt ====
595 595  
596 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
597 597  
598 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
668 +Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
599 599  
670 +(% style="color:blue" %)** Interrupt connection method:**
600 600  
601 -== 2.5 Datalog Feature ==
672 +[[image:image-20230513105351-5.png||height="147" width="485"]]
602 602  
603 603  
604 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
675 +(% style="color:blue" %)**Example to use with door sensor :**
605 605  
677 +The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
606 606  
607 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
679 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
608 608  
681 +When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
609 609  
610 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
611 611  
612 -* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
613 -* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
684 +(% style="color:blue" %)**Below is the installation example:**
614 614  
615 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
686 +Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
616 616  
617 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
688 +* (((
689 +One pin to SN50_v3's PA8 pin
690 +)))
691 +* (((
692 +The other pin to SN50_v3's VDD pin
693 +)))
618 618  
619 -=== 2.5.2 Unix TimeStamp ===
695 +Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
620 620  
697 +Door sensors have two types: (% style="color:blue" %)** NC (Normal close)**(%%) and (% style="color:blue" %)**NO (normal open)**(%%). The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
621 621  
622 -S31x-LB uses Unix TimeStamp format based on
699 +When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
623 623  
624 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
701 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
625 625  
626 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
703 +The above photos shows the two parts of the magnetic switch fitted to a door.
627 627  
628 -Below is the converter example
705 +The software by default uses the falling edge on the signal line as an interrupt. We need to modify it to accept both the rising edge (0v ~-~-> VCC , door close) and the falling edge (VCC ~-~-> 0v , door open) as the interrupt.
629 629  
630 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
707 +The command is:
631 631  
632 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
709 +(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
633 633  
711 +Below shows some screen captures in TTN V3:
634 634  
635 -=== 2.5.3 Set Device Time ===
713 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1||alt="1656379339508-835.png"]]
636 636  
637 637  
638 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
716 +In MOD=1, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
639 639  
640 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
718 +door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
641 641  
642 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
643 643  
721 +==== 2.3.3.6 I2C Interface (SHT20 & SHT31) ====
644 644  
645 -=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
646 646  
724 +The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
647 647  
648 -The Datalog uplinks will use below payload format.
726 +We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
649 649  
650 -**Retrieval data payload:**
728 +Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
651 651  
652 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
653 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
654 -**Size(bytes)**
655 -)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
656 -|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
657 -[[Temp_Black>>||anchor="HTemperatureBlack:"]]
658 -)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
730 +Below is the connection to SHT20/ SHT31. The connection is as below:
659 659  
660 -**Poll message flag & Ext:**
661 661  
662 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
733 +[[image:image-20230513103633-3.png||height="448" width="716"]]
663 663  
664 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
735 +The device will be able to get the I2C sensor data now and upload to IoT Server.
665 665  
666 -**Poll Message Flag**: 1: This message is a poll message reply.
737 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
667 667  
668 -* Poll Message Flag is set to 1.
739 +Convert the read byte to decimal and divide it by ten.
669 669  
670 -* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
741 +**Example:**
671 671  
672 -For example, in US915 band, the max payload for different DR is:
743 +Temperature:  Read:0116(H) = 278(D)  Value:  278 /10=27.8℃;
673 673  
674 -**a) DR0:** max is 11 bytes so one entry of data
745 +Humidity:    Read:0248(H)=584(D)  Value:  584 / 10=58.4, So 58.4%
675 675  
676 -**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
747 +If you want to use other I2C device, please refer the SHT20 part source code as reference.
677 677  
678 -**c) DR2:** total payload includes 11 entries of data
679 679  
680 -**d) DR3: **total payload includes 22 entries of data.
750 +==== 2.3.3.7  ​Distance Reading ====
681 681  
682 -If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
683 683  
753 +Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
684 684  
755 +
756 +==== 2.3.3.8 Ultrasonic Sensor ====
757 +
758 +
759 +This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
760 +
761 +The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
762 +
763 +The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
764 +
765 +The picture below shows the connection:
766 +
767 +[[image:image-20230512173903-6.png||height="596" width="715"]]
768 +
769 +
770 +Connect to the SN50_v3 and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
771 +
772 +The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
773 +
685 685  **Example:**
686 686  
687 -If S31x-LB has below data inside Flash:
776 +Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
688 688  
689 -[[image:1682646494051-944.png]]
690 690  
691 -If user sends below downlink command: 3160065F9760066DA705
779 +==== 2.3.3.9  Battery Output - BAT pin ====
692 692  
693 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
694 694  
695 - Stop time: 60066DA7= time 21/1/19 05:27:03
782 +The BAT pin of SN50v3 is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
696 696  
697 697  
698 -**S31x-LB will uplink this payload.**
785 +==== 2.3.3.10  +5V Output ====
699 699  
700 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
701 701  
702 -(((
703 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
704 -)))
788 +SN50v3 will enable +5V output before all sampling and disable the +5v after all sampling. 
705 705  
706 -(((
707 -Where the first 11 bytes is for the first entry:
708 -)))
790 +The 5V output time can be controlled by AT Command.
709 709  
710 -(((
711 -7FFF089801464160065F97
712 -)))
792 +(% style="color:blue" %)**AT+5VT=1000**
713 713  
714 -(((
715 -**Ext sensor data**=0x7FFF/100=327.67
716 -)))
794 +Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
717 717  
718 -(((
719 -**Temp**=0x088E/100=22.00
720 -)))
796 +By default the AT+5VT=500. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
721 721  
722 -(((
723 -**Hum**=0x014B/10=32.6
724 -)))
725 725  
726 -(((
727 -**poll message flag & Ext**=0x41,means reply data,Ext=1
728 -)))
799 +==== 2.3.3.11  BH1750 Illumination Sensor ====
729 729  
730 -(((
731 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
732 -)))
733 733  
802 +MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
734 734  
735 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
804 +[[image:image-20230512172447-4.png||height="416" width="712"]]
736 736  
737 -== 2.6 Temperature Alarm Feature ==
738 738  
807 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
739 739  
740 -S31x-LB work flow with Alarm feature.
741 741  
810 +==== 2.3.3.12  Working MOD ====
742 742  
743 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
744 744  
813 +The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
745 745  
746 -== 2.7 Frequency Plans ==
815 +User can use the 3^^rd^^ ~~ 7^^th^^  bit of this byte to see the working mod:
747 747  
817 +Case 7^^th^^ Byte >> 2 & 0x1f:
748 748  
749 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
819 +* 0: MOD1
820 +* 1: MOD2
821 +* 2: MOD3
822 +* 3: MOD4
823 +* 4: MOD5
824 +* 5: MOD6
825 +* 6: MOD7
826 +* 7: MOD8
827 +* 8: MOD9
750 750  
829 +
830 +
831 +== 2.4 Payload Decoder file ==
832 +
833 +
834 +In TTN, use can add a custom payload so it shows friendly reading
835 +
836 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
837 +
838 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
839 +
840 +
841 +== 2.5 Frequency Plans ==
842 +
843 +
844 +The SN50v3-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
845 +
751 751  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
752 752  
753 753  
754 -= 3. Configure S31x-LB =
849 += 3. Configure SN50v3-LB =
755 755  
756 756  == 3.1 Configure Methods ==
757 757  
758 758  
759 -S31x-LB supports below configure method:
854 +SN50v3-LB supports below configure method:
760 760  
761 761  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
762 762  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
763 763  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
764 764  
860 +
861 +
765 765  == 3.2 General Commands ==
766 766  
767 767  
... ... @@ -775,7 +775,7 @@
775 775  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
776 776  
777 777  
778 -== 3.3 Commands special design for S31x-LB ==
875 +== 3.3 Commands special design for SN50v3-LB ==
779 779  
780 780  
781 781  These commands only valid for S31x-LB, as below:
... ... @@ -809,10 +809,12 @@
809 809  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
810 810  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
811 811  
909 +
910 +
812 812  === 3.3.2 Get Device Status ===
813 813  
814 814  
815 -Send a LoRaWAN downlink to ask device send Alarm settings.
914 +Send a LoRaWAN downlink to ask the device to send its status.
816 816  
817 817  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
818 818  
... ... @@ -819,108 +819,159 @@
819 819  Sensor will upload Device Status via FPORT=5. See payload section for detail.
820 820  
821 821  
822 -=== 3.3.3 Set Temperature Alarm Threshold ===
921 +=== 3.3.3 Set Interrupt Mode ===
823 823  
824 -* (% style="color:blue" %)**AT Command:**
825 825  
826 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
924 +Feature, Set Interrupt mode for GPIO_EXIT.
827 827  
828 -* When min=0, and max≠0, Alarm higher than max
829 -* When min≠0, and max=0, Alarm lower than min
830 -* When min≠0 and max≠0, Alarm higher than max or lower than min
926 +(% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
831 831  
832 -Example:
928 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
929 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
930 +|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
931 +0
932 +OK
933 +the mode is 0 =Disable Interrupt
934 +)))
935 +|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
936 +Set Transmit Interval
937 +0. (Disable Interrupt),
938 +~1. (Trigger by rising and falling edge)
939 +2. (Trigger by falling edge)
940 +3. (Trigger by rising edge)
941 +)))|(% style="width:157px" %)OK
942 +|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
943 +Set Transmit Interval
833 833  
834 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
945 +trigger by rising edge.
946 +)))|(% style="width:157px" %)OK
947 +|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
835 835  
836 -* (% style="color:blue" %)**Downlink Payload:**
949 +(% style="color:blue" %)**Downlink Command: 0x06**
837 837  
838 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
951 +Format: Command Code (0x06) followed by 3 bytes.
839 839  
840 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
953 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
841 841  
955 +* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
956 +* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
957 +* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
958 +* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
842 842  
843 -=== 3.3.4 Set Humidity Alarm Threshold ===
844 844  
845 -* (% style="color:blue" %)**AT Command:**
846 846  
847 -(% style="color:#037691" %)**AT+SHHUM=min,max**
962 +=== 3.3.4 Set Power Output Duration ===
848 848  
849 -* When min=0, and max≠0, Alarm higher than max
850 -* When min≠0, and max=0, Alarm lower than min
851 -* When min≠0 and max≠0, Alarm higher than max or lower than min
852 852  
853 -Example:
965 +Control the output duration 5V . Before each sampling, device will
854 854  
855 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
967 +~1. first enable the power output to external sensor,
856 856  
857 -* (% style="color:blue" %)**Downlink Payload:**
969 +2. keep it on as per duration, read sensor value and construct uplink payload
858 858  
859 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
971 +3. final, close the power output.
860 860  
861 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
973 +(% style="color:blue" %)**AT Command: AT+5VT**
862 862  
975 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
976 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
977 +|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
978 +500(default)
979 +OK
980 +)))
981 +|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
982 +Close after a delay of 1000 milliseconds.
983 +)))|(% style="width:157px" %)OK
863 863  
864 -=== 3.3.5 Set Alarm Interval ===
985 +(% style="color:blue" %)**Downlink Command: 0x07**
865 865  
866 -The shortest time of two Alarm packet. (unit: min)
987 +Format: Command Code (0x07) followed by 2 bytes.
867 867  
868 -* (% style="color:blue" %)**AT Command:**
989 +The first and second bytes are the time to turn on.
869 869  
870 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
991 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
992 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
871 871  
872 -* (% style="color:blue" %)**Downlink Payload:**
873 873  
874 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
875 875  
996 +=== 3.3.5 Set Weighing parameters ===
876 876  
877 -=== 3.3.6 Get Alarm settings ===
878 878  
999 +Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
879 879  
880 -Send a LoRaWAN downlink to ask device send Alarm settings.
1001 +(% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
881 881  
882 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
1003 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1004 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1005 +|(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
1006 +|(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
1007 +|(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
883 883  
884 -**Example:**
1009 +(% style="color:blue" %)**Downlink Command: 0x08**
885 885  
886 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
1011 +Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
887 887  
1013 +Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
888 888  
889 -**Explain:**
1015 +The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
890 890  
891 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
1017 +* Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
1018 +* Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
1019 +* Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
892 892  
893 -=== 3.3.7 Set Interrupt Mode ===
894 894  
895 895  
896 -Feature, Set Interrupt mode for GPIO_EXIT.
1023 +=== 3.3.6 Set Digital pulse count value ===
897 897  
898 -(% style="color:blue" %)**AT Command: AT+INTMOD**
899 899  
1026 +Feature: Set the pulse count value.
1027 +
1028 +Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
1029 +
1030 +(% style="color:blue" %)**AT Command: AT+SETCNT**
1031 +
900 900  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
901 901  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
902 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
903 -0
1034 +|(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
1035 +|(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
1036 +
1037 +(% style="color:blue" %)**Downlink Command: 0x09**
1038 +
1039 +Format: Command Code (0x09) followed by 5 bytes.
1040 +
1041 +The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
1042 +
1043 +* Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1044 +* Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1045 +
1046 +
1047 +
1048 +=== 3.3.7 Set Workmode ===
1049 +
1050 +
1051 +Feature: Switch working mode.
1052 +
1053 +(% style="color:blue" %)**AT Command: AT+MOD**
1054 +
1055 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1056 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1057 +|(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
904 904  OK
905 -the mode is 0 =Disable Interrupt
906 906  )))
907 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
908 -Set Transmit Interval
909 -0. (Disable Interrupt),
910 -~1. (Trigger by rising and falling edge)
911 -2. (Trigger by falling edge)
912 -3. (Trigger by rising edge)
913 -)))|(% style="width:157px" %)OK
1060 +|(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1061 +OK
1062 +Attention:Take effect after ATZ
1063 +)))
914 914  
915 -(% style="color:blue" %)**Downlink Command: 0x06**
1065 +(% style="color:blue" %)**Downlink Command: 0x0A**
916 916  
917 -Format: Command Code (0x06) followed by 3 bytes.
1067 +Format: Command Code (0x0A) followed by 1 bytes.
918 918  
919 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1069 +* Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1070 +* Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
920 920  
921 -* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
922 -* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
923 923  
1073 +
924 924  = 4. Battery & Power Consumption =
925 925  
926 926  
... ... @@ -947,10 +947,18 @@
947 947  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
948 948  * Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
949 949  
1100 +
1101 +
950 950  = 6. FAQ =
951 951  
1104 +== 6.1 Where can i find source code of SN50v3-LB? ==
952 952  
953 953  
1107 +* **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1108 +* **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1109 +
1110 +
1111 +
954 954  = 7. Order Info =
955 955  
956 956  
... ... @@ -974,8 +974,11 @@
974 974  * (% style="color:red" %)**20**(%%): With M20 waterproof cable hole
975 975  * (% style="color:red" %)**NH**(%%): No Hole
976 976  
1135 +
1136 +
977 977  = 8. ​Packing Info =
978 978  
1139 +
979 979  (% style="color:#037691" %)**Package Includes**:
980 980  
981 981  * SN50v3-LB LoRaWAN Generic Node
... ... @@ -987,8 +987,11 @@
987 987  * Package Size / pcs : cm
988 988  * Weight / pcs : g
989 989  
1151 +
1152 +
990 990  = 9. Support =
991 991  
992 992  
993 993  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
994 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1157 +
1158 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
image-20230512163509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 MB
Content
image-20230512164658-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 MB
Content
image-20230512170701-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
image-20230512172447-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 MB
Content
image-20230512173758-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 MB
Content
image-20230512173903-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512180609-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512180718-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512181814-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.2 MB
Content
image-20230513084523-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +611.3 KB
Content
image-20230513102034-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +607.1 KB
Content
image-20230513103633-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +595.5 KB
Content
image-20230513105207-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +384.7 KB
Content
image-20230513105351-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
image-20230513110214-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +172.7 KB
Content
image-20230513111203-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +79.9 KB
Content
image-20230513111231-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20230513111255-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +70.4 KB
Content
image-20230513134006-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 MB
Content
image-20230515135611-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +948.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0