RS485-LN – RS485 to LoRaWAN Converter User Manual

1

(% aria-label="1653266934636-343.png image widget" contenteditable="false" role="region" tabindex="-1" %)

2

(((

3

(% data-widget="image" style="text-align:center" %)

4

[[image:1653266934636-343.png||height="385" width="385"]](% title="Click and drag to resize" %)

5

6

(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||height="15" role="presentation" title="Click and drag to move" width="15"]]

)))

**Table of Contents:**

(% aria-label="macro:toc widget" contenteditable="false" role="region" tabindex="-1" %)

21

(((

22

(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||height="15" role="presentation" title="Click and drag to move" width="15"]]

)))

= 1.Introduction =

== 1.1 What is RS485-LN RS485 to LoRaWAN Converter ==

(((

The Dragino RS485-LN is a (% style="color:blue" %)**RS485 to LoRaWAN Converter**(%%). It converts the RS485 signal into LoRaWAN wireless signal which simplify the IoT installation and reduce the installation/maintaining cost.

)))

(((

RS485-LN allows user to (% style="color:blue" %)**monitor / control RS485 devices**(%%) and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

)))

(((

(% style="color:blue" %)**For data uplink**(%%), RS485-LN sends user-defined commands to RS485 devices and gets the return from the RS485 devices. RS485-LN will process these returns according to user-define rules to get the final payload and upload to LoRaWAN server.

)))

(((

(% style="color:blue" %)**For data downlink**(%%), RS485-LN runs in LoRaWAN Class C. When there downlink commands from LoRaWAN server, RS485-LN will forward the commands from LoRaWAN server to RS485 devices.

)))

(((

(% style="color:blue" %)**Demo Dashboard for RS485-LN**(%%) connect to two energy meters: [[https:~~/~~/app.datacake.de/dashboard/d/58844a26-378d-4c5a-aaf5-b5b5b153447a>>url:https://app.datacake.de/dashboard/d/58844a26-378d-4c5a-aaf5-b5b5b153447a]]

)))

(% aria-label="1653267211009-519.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653267211009-519.png||data-widget="image" height="419" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

58

59

60

== 1.2 Specifications ==

61

62

63

(% style="color:#037691" %)**Hardware System:**

64

65

* STM32L072xxxx MCU

66

* SX1276/78 Wireless Chip

67

* Power Consumption (exclude RS485 device):

68

** Idle: 32mA@12v

69

** 20dB Transmit: 65mA@12v

70

71

(% style="color:#037691" %)**Interface for Model:**

72

73

* RS485

74

* Power Input 7~~ 24V DC.

75

76

(% style="color:#037691" %)**LoRa Spec:**

77

78

* Frequency Range:

79

** Band 1 (HF): 862 ~~ 1020 Mhz

80

** Band 2 (LF): 410 ~~ 528 Mhz

81

* 168 dB maximum link budget.

82

* +20 dBm - 100 mW constant RF output vs.

83

* +14 dBm high efficiency PA.

84

* Programmable bit rate up to 300 kbps.

85

* High sensitivity: down to -148 dBm.

86

* Bullet-proof front end: IIP3 = -12.5 dBm.

87

* Excellent blocking immunity.

88

* Low RX current of 10.3 mA, 200 nA register retention.

89

* Fully integrated synthesizer with a resolution of 61 Hz.

90

* FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.

91

* Built-in bit synchronizer for clock recovery.

92

* Preamble detection.

93

* 127 dB Dynamic Range RSSI.

94

* Automatic RF Sense and CAD with ultra-fast AFC.

95

* Packet engine up to 256 bytes with CRC

== 1.3 Features ==

* LoRaWAN Class A & Class C protocol (default Class C)

103

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864/MA869

104

* AT Commands to change parameters

105

* Remote configure parameters via LoRa Downlink

106

* Firmware upgradable via program port

107

* Support multiply RS485 devices by flexible rules

108

* Support Modbus protocol

109

* Support Interrupt uplink (Since hardware version v1.2)

== 1.4 Applications ==

114

115

116

* Smart Buildings & Home Automation

117

* Logistics and Supply Chain Management

* Smart Metering

* Smart Agriculture

* Smart Cities

* Smart Factory

== 1.5 Firmware Change log ==

126

127

128

[[RS485-LN Image files – Download link and Change log>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/]]

== 1.6 Hardware Change log ==

(((

(((

(((

v1.2: Add External Interrupt Pin.

)))

(((

v1.0: Release

)))

)))

)))

= 2. Power ON Device =

(((

The RS485-LN can be powered by 7 ~~ 24V DC power source. Connection as below

154

155

* Power Source VIN to RS485-LN VIN+

156

* Power Source GND to RS485-LN VIN-

157

158

(((

159

Once there is power, the RS485-LN will be on.

160

)))

161

162

(% aria-label="1653268091319-405.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653268091319-405.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

)))

= 3. Operation Mode =

168

169

== 3.1 How it works? ==

(((

(((

The RS485-LN is configured as LoRaWAN OTAA Class C mode by default. It has OTAA keys to join network. To connect a local LoRaWAN network, user just need to input the OTAA keys in the network server and power on the RS485-LN. It will auto join the network via OTAA.

)))

)))

== 3.2 Example to join LoRaWAN network ==

181

182

183

Here shows an example for how to join the TTN V3 Network. Below is the network structure, we use [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]] as LoRaWAN gateway here.

184

185

186

(% aria-label="1653268155545-638.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653268155545-638.png||data-widget="image" height="334" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

(((

The RS485-LN in this example connected to two RS485 devices for demonstration, user can connect to other RS485 devices via the same method. The connection is as below:

)))

(((

485A+ and 485B- of the sensor are connected to RS485A and RA485B of RS485-LN respectively.

)))

(% aria-label="1653268227651-549.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653268227651-549.png||data-widget="image" height="592" width="720"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

The LG308 is already set to connect to [[TTN V3 network >>path:https://www.thethingsnetwork.org/]]. So what we need to now is only configure the TTN V3:

)))

(((

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from RS485-LN.

)))

(((

Each RS485-LN is shipped with a sticker with unique device EUI:

)))

)))

(% aria-label="1652953462722-299.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953462722-299.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

(((

User can enter this key in their LoRaWAN Server portal. Below is TTN V3 screen shot:

)))

(((

**Add APP EUI in the application.**

)))

)))

(% aria-label="image-20220519174512-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-1.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

234

235

(% aria-label="image-20220519174512-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-2.png||data-widget="image" height="323" width="720"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

236

237

(% aria-label="image-20220519174512-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-3.png||data-widget="image" height="556" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

238

239

(% aria-label="image-20220519174512-4.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-4.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]

240

241

242

(% title="Click and drag to resize" %)

243

244

You can also choose to create the device manually.

245

246

(% aria-label="1652953542269-423.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953542269-423.png||data-widget="image" height="710" width="723"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

**Add APP KEY and DEV EUI**

251

252

(% aria-label="1652953553383-907.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953553383-907.png||data-widget="image" height="514" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

(% style="color:blue" %)**Step 2**(%%): Power on RS485-LN and it will auto join to the TTN V3 network. After join success, it will start to upload message to TTN V3 and user can see in the panel.

)))

(% aria-label="1652953568895-172.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953568895-172.png||data-widget="image" height="232" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

263

264

265

== 3.3 Configure Commands to read data ==

(((

(((

(((

There are plenty of RS485 devices in the market and each device has different command to read the valid data. To support these devices in flexible, RS485-LN supports flexible command set. User can use [[AT Commands>>||anchor="H3.5ConfigureRS485-LNviaATorDownlink"]] or LoRaWAN Downlink Command to configure what commands RS485-LN should send for each sampling and how to handle the return from RS485 devices.

)))

)))

(((

(((

(% style="color:red" %)**Note: below description and commands are for firmware version >v1.1, if you have firmware version v1.0. Please check the [[user manual v1.0>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/&file=RS485-LN_UserManual_v1.0.1.pdf]] or upgrade the firmware to v1.1**

)))

)))

)))

=== 3.3.1 Configure UART settings for RS485 or TTL communication ===

287

288

289

To use RS485-LN to read data from RS485 sensors, connect the RS485-LN A/B traces to the sensors. And user need to make sure RS485-LN use the match UART setting to access the sensors. The related commands for UART settings are:

290

291

292

(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)

293

|=(% style="width: 110px;" %)(((

294

**AT Commands**

295

)))|=(% style="width: 210px;" %)(((

296

**Description**

297

)))|=(% style="width: 190px;" %)(((

298

**Example**

299

)))

300

|(% style="width:110px" %)(((

301

AT+BAUDR

302

)))|(% style="width:190px" %)(((

303

Set the baud rate (for RS485 connection). Default Value is: 9600.

304

)))|(% style="width:190px" %)(((

(((

AT+BAUDR=9600

)))

(((

Options: (1200,2400,4800,14400,19200,115200)

311

)))

312

)))

313

|(% style="width:110px" %)(((

314

AT+PARITY

315

)))|(% style="width:190px" %)(((

316

Set UART parity (for RS485 connection)

317

)))|(% style="width:190px" %)(((

(((

AT+PARITY=0

)))

(((

Option: 0: no parity, 1: odd parity, 2: even parity

324

)))

325

)))

326

|(% style="width:110px" %)(((

327

AT+STOPBIT

328

)))|(% style="width:190px" %)(((

329

(((

330

Set serial stopbit (for RS485 connection)

)))

(((

)))

)))|(% style="width:190px" %)(((

337

(((

338

AT+STOPBIT=0 for 1bit

)))

(((

AT+STOPBIT=1 for 1.5 bit

)))

(((

AT+STOPBIT=2 for 2 bits

)))

)))

=== 3.3.2 Configure sensors ===

(((

(((

Some sensors might need to configure before normal operation. User can configure such sensor via PC and RS485 adapter or through RS485-LN AT Commands (% style="color:#4f81bd" %)**AT+CFGDEV**(%%). Each (% style="color:#4f81bd" %)**AT+CFGDEV **(%%)equals to send a RS485 command to sensors. This command will only run when user input it and won't run during each sampling.

)))

)))

(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)

364

|=(% style="width: 110px;" %)**AT Commands**|=(% style="width: 210px;" %)**Description**|=(% style="width: 190px;" %)**Example**

365

|AT+CFGDEV|(% style="width:110px" %)(((

366

(((

367

This command is used to configure the RS485/TTL devices; they won’t be used during sampling.

)))

(((

AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,

)))

(((

mm: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command

376

)))

377

)))|(% style="width:190px" %)AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,m

=== 3.3.3 Configure read commands for each sampling ===

(((

During each sampling, we need confirm what commands we need to send to the RS485 sensors to read data. After the RS485 sensors send back the value, it normally include some bytes and we only need a few from them for a shorten payload.

386

387

To save the LoRaWAN network bandwidth, we might need to read data from different sensors and combine their valid value into a short payload.

388

389

This section describes how to achieve above goals.

390

391

During each sampling, the RS485-LN can support 15 commands to read sensors. And combine the return to one or several uplink payloads.

392

393

394

(% style="color:#037691" %)**Each RS485 commands include two parts:**

395

396

397

~1. What commands RS485-LN will send to the RS485 sensors. There are total 15 commands from **AT+COMMAD1**, **ATCOMMAND2**,…, to **AT+COMMANDF**. All commands are of same grammar.

398

399

2. How to get wanted value the from RS485 sensors returns from by 1). There are total 15 AT Commands to handle the return, commands are **AT+DATACUT1**,**AT+DATACUT2**,…, **AT+DATACUTF** corresponding to the commands from 1). All commands are of same grammar.

400

401

3. Some RS485 device might has longer delay on reply, so user can use AT+CMDDL to set the timeout for getting reply after the RS485 command is sent. For example **AT+CMDDL1=1000** to send the open time to 1000ms

402

403

404

After we got the valid value from each RS485 commands, we need to combine them together with the command **AT+DATAUP**.

405

406

Below are examples for the how above AT Commands works.

407

408

409

(% style="color:#037691" %)**AT+COMMANDx **(%%)**: **This command will be sent to RS485 devices during each sampling, Max command length is 14 bytes. The grammar is:

410

411

(% border="1" style="background-color:#4bacc6; color:white; width:499px" %)

412

|(% style="width:496px" %)(((

413

**AT+COMMANDx=xx xx xx xx xx xx xx xx xx xx xx xx,m**

414

415

**xx xx xx xx xx xx xx xx xx xx xx xx: The RS485 command to be sent**

416

417

**m: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command**

418

)))

419

420

For example, if we have a RS485 sensor. The command to get sensor value is: 01 03 0B B8 00 02 46 0A. Where 01 03 0B B8 00 02 is the Modbus command to read the register 0B B8 where stored the sensor value. The 46 0A is the CRC-16/MODBUS which calculate manually.

421

422

In the RS485-LN, we should use this command AT+COMMAND1=01 03 0B B8 00 02,1 for the same.

423

424

425

(% style="color:#037691" %)**AT+DATACUTx **(%%)**: **This command defines how to handle the return from AT+COMMANDx, max return length is 100 bytes.

426

427

(% border="1" style="background-color:#4bacc6; color:white; width:510px" %)

428

|(% style="width:510px" %)(((

429

**AT+DATACUTx=a,b,c**

430

431

* **a: length for the return of AT+COMMAND**

432

* **b:1: grab valid value by byte, max 6 bytes. 2: grab valid value by bytes section, max 3 sections.**

433

* **c: define the position for valid value. **

)))

**Examples:**

* (% style="color:#037691" %)**Grab bytes**

440

441

(% aria-label="image-20220602153621-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602153621-1.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

* (% style="color:#037691" %)**Grab a section**

446

447

(% aria-label="image-20220602153621-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602153621-2.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

* (% style="color:#037691" %)**Grab different sections**

452

453

(% aria-label="image-20220602153621-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602153621-3.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

)))

=== 3.3.4 Compose the uplink payload ===

(((

Through AT+COMMANDx and AT+DATACUTx we got valid value from each RS485 commands, Assume these valid value are RETURN1, RETURN2, .., to RETURNx. The next step is how to compose the LoRa Uplink Payload by these RETURNs. The command is **AT+DATAUP.**

)))

(((

(% style="color:#037691" %)**Examples: AT+DATAUP=0**

)))

(((

Compose the uplink payload with value returns in sequence and send with (% style="color:red" %)**A SIGNLE UPLINK**.

)))

(((

Final Payload is (% style="color:#4f81bd" %)**Battery Info+PAYVER + VALID Value from RETURN1 + Valid Value from RETURN2 + … + RETURNx**

)))

(((

Where PAYVER is defined by AT+PAYVER, below is an example screen shot.

)))

[[image:image-20220929111027-1.png||height="509" width="685"]](% title="Click and drag to resize" %)

488

489

490

(% style="color:#037691" %)**Examples: AT+DATAUP=1**

491

492

493

Compose the uplink payload with value returns in sequence and send with (% style="color:red" %)**Multiply UPLINKs**.

494

495

Final Payload is (% style="color:#4f81bd" %)**PAYVER + PAYLOAD COUNT + PAYLOAD# + DATA**

496

497

498

~1. PAYVER: Defined by AT+PAYVER

499

500

2. PAYLOAD COUNT: Total how many uplinks of this sampling.

501

502

3. PAYLOAD#: Number of this uplink. (from 0,1,2,3…,to PAYLOAD COUNT)

503

504

4. DATA: Valid value: max 8 bytes for each uplink so each uplink <= 11 bytes. For the last uplink, DATA will might less than 8 bytes

505

506

507

(% aria-label="image-20220602155039-4.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602155039-4.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

508

509

510

So totally there will be 3 uplinks for this sampling, each uplink include 8 bytes DATA

511

512

DATA1=RETURN1 Valid Value + the first two of Valid value of RETURN10= **20 20 0a 33 90 41 02 aa**

513

514

DATA2=3^^rd^^ ~~ 10^^th^^ byte of Valid value of RETURN10= **05 81 0a 20 20 20 20 2d**

515

516

DATA3=the rest of Valid value of RETURN10= **30**

517

518

519

(% style="color:red" %)**Notice: In firmware v1.3, the Max bytes has been changed according to the max bytes in different Frequency Bands for lowest SF. As below:**

520

521

522

~* For AU915/AS923 bands, if UplinkDwell time=0, max 51 bytes for each uplink.

523

524

* For AU915/AS923 bands, if UplinkDwell time=0, max 11 bytes for each uplink.

525

526

* For US915 band, max 11 bytes for each uplink.

527

528

~* For all other bands: max 51 bytes for each uplink.

529

530

531

(% style="color:red" %)** When AT+DATAUP=1, the maximum number of segments is 15, and the maximum total number of bytes is 1500;**

532

533

(% style="color:red" %)** When AT+DATAUP=1 and AT+ADR=0, the maximum number of bytes of each payload is determined by the DR value. (Since v1.4.0)**

Below are the uplink payloads:

538

539

540

(% aria-label="1654157178836-407.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654157178836-407.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

541

542

543

=== 3.3.5 Uplink on demand ===

544

545

546

Except uplink periodically, RS485-LN is able to uplink on demand. The server send downlink command to RS485-LN and RS485 will uplink data base on the command.

547

548

(% style="color:blue" %)**Downlink control command:**

549

550

(% style="color:#4472c4" %)** 0x08 command**(%%): Poll an uplink with current command set in RS485-LN.

551

552

(% style="color:#4472c4" %)** 0xA8 command**(%%): Send a command to RS485-LN and uplink the output from sensors.

553

554

555

=== 3.3.6 Uplink on Interrupt ===

556

557

558

RS485-LN support external Interrupt uplink since hardware v1.2 release.

559

560

561

(% aria-label="1654157342174-798.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654157342174-798.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

562

563

Connect the Interrupt pin to RS485-LN INT port and connect the GND pin to V- port. When there is a high voltage (Max 24v) on INT pin. Device will send an uplink packet.

564

565

566

== 3.4 Uplink Payload ==

567

568

569

(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)

570

|=(% scope="row" style="width: 60px;" %)(((

571

Size(bytes)

572

)))|(% style="width:80px" %)1|(% style="width:360px" %)(((

573

Length depends on the return from the commands

574

)))

575

|=(% style="width: 90px;" %)(((

576

Value

577

)))|(% style="width:114px" %)(((

578

PAYLOAD_VER

579

)))|(% style="width:353px" %)(((

580

If the valid payload is too long and exceed the maximum

581

582

support payload length in server, server will show payload not

583

584

provided in the LoRaWAN server.

585

)))

586

587

(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]

588

589

(% title="Click and drag to resize" %)

590

591

Below is the decoder for the first 3 bytes. The rest bytes are dynamic depends on different RS485 sensors.

592

593

594

== 3.5 Configure RS485-LN via AT or Downlink ==

(((

User can configure RS485-LN via AT Commands or LoRaWAN Downlink Commands

)))

(((

There are two kinds of Commands:

)))

* (((

(% style="color:#4f81bd" %)**Common Commands**(%%): They should be available for each sensor, such as: change uplink interval, reset device. For firmware v1.3, user can find what common commands it supports: [[AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

)))

* (((

(% style="color:#4f81bd" %)**Sensor Related Commands**(%%): These commands are special designed for RS485-LN. User can see these commands below:

)))

(((

)))

=== 3.5.1 Common Commands ===

620

621

622

They should be available for each of Dragino Sensors, such as: change uplink interval, reset device. For firmware v1.3, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

623

624

625

=== 3.5.2 Downlink Response(Since firmware v1.4) ===

626

627

628

Response feature is added to the server's downlink, a special package with a FPort of 200 will be uploaded immediately after receiving the data sent by the server.

629

630

631

(% aria-label="image-20220602163333-5.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602163333-5.png||data-widget="image" height="263" width="1160"]]

632

633

(% title="Click and drag to resize" %)

634

635

The first byte of this package represents whether the configuration is successful, 00 represents failure, 01 represents success. Except for the first byte, the other is the previous downlink. (All commands except A8 type commands are applicable)

636

637

638

=== 3.5.3 Sensor related commands ===

==== (% style="color:blue" %)**RS485 Debug Command**(%%) ====

(((

This command is used to configure the RS485 devices; they won't be used during sampling. Max Length of AT+CFGDEV is **40 bytes**.

)))

(((

* (% style="color:#037691" %)**AT Command**

651

652

(((

653

(% style="color:#4472c4" %)** AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,m** (%%) m: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command

)))

)))

(((

)))

* (((

(% style="color:#037691" %)**Downlink Payload**

)))

(((

Format: (% style="color:#4472c4" %)** A8 MM NN XX XX XX XX YY**

)))

(((

Where:

)))

* (((

MM: 1: add CRC-16/MODBUS ; 0: no CRC

675

)))

676

* (((

677

NN: The length of RS485 command

678

)))

679

* (((

680

XX XX XX XX: RS485 command total NN bytes

)))

* (((

(((

YY: How many bytes will be uplink from the return of this RS485 command,

)))

* (((

if YY=0, RS485-LN will execute the downlink command without uplink;

689

)))

690

* (((

691

if YY>0, RS485-LN will uplink total YY bytes from the output of this RS485 command; Fport=200

692

)))

693

* (((

694

if YY=FF, RS485-LN will uplink RS485 output with the downlink command content; Fport=200.

)))

)))

(((

(% style="color:blue" %)**Example 1:** (%%) ~-~-> Configure without ask for uplink (YY=0)

)))

(((

To connect a Modbus Alarm with below commands.

)))

* (((

The command to active alarm is: 0A 05 00 04 00 01 4C B0. Where 0A 05 00 04 00 01 is the Modbus command to read the register 00 40 where stored the DI status. The 4C B0 is the CRC-16/MODBUS which calculate manually.

)))

* (((

The command to deactivate alarm is: 0A 05 00 04 00 00 8D 70. Where 0A 05 00 04 00 00 is the Modbus command to read the register 00 40 where stored the DI status. The 8D 70 is the CRC-16/MODBUS which calculate manually.

)))

(((

So if user want to use downlink command to control to RS485 Alarm, he can use:

)))

(((

(% style="color:#4f81bd" %)**A8 01 06 0A 05 00 04 00 01 00**(%%): to activate the RS485 Alarm

)))

(((

(% style="color:#4f81bd" %)**A8 01 06 0A 05 00 04 00 00 00**(%%): to deactivate the RS485 Alarm

)))

(((

A8 is type code and 01 means add CRC-16/MODBUS at the end, the 3^^rd^^ byte is 06, means the next 6 bytes are the command to be sent to the RS485 network, the final byte 00 means this command don’t need to acquire output.

)))

(((

)))

(((

(% style="color:blue" %)**Example 2:** (%%) ~-~-> Configure with requesting uplink and original downlink command (**YY=FF**)

)))

(((

User in IoT server send a downlink command: (% style="color:#4f81bd" %)**A8 01 06 0A 08 00 04 00 01 YY**

)))

(((

)))

(((

(((

RS485-LN got this downlink command and send (% style="color:#4f81bd" %)**0A 08 00 04 00 01 **(%%)to Modbus network. One of the RS485 sensor in the network send back Modbus reply **0A 08 00 04 00 00**. RS485-LN get this reply and combine with the original downlink command and uplink. The uplink message is: **A8** (% style="color:#4f81bd" %)**0A 08 00 04 00 **(% style="color:red" %)**01 06** ** **(% style="color:green" %)**0A 08 00 04 00 00**

)))

)))

(((

(% aria-label="1654159460680-153.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654159460680-153.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

)))

==== (% style="color:blue" %)**Set Payload version**(%%) ====

(((

This is the first byte of the uplink payload. RS485-LN can connect to different sensors. User can set the PAYVER field to tell server how to decode the current payload.

)))

(((

* (% style="color:#037691" %)**AT Command:**

774

775

(% style="color:#4472c4" %)** AT+PAYVER: ** (%%) Set PAYVER field = 1

)))

* (((

(% style="color:#037691" %)**Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0xAE 01** (%%) ~-~-> Set PAYVER field = 0x01

)))

(((

(% style="color:#4472c4" %)** 0xAE 0F** (%%) ~-~-> Set PAYVER field = 0x0F

)))

**1 ) Add the interrupt flag at the highest bit of the Payver byte, that is, Byte7 of the first byte. (Since v1.4.0)**

794

795

796

[[image:image-20220824145428-2.png||height="168" width="1300"]]

**2 ) if the data intercepted by AT+DATACUT or AT+MBFUN is empty, it will display NULL, and the payload will be filled with n FFs.**

801

802

803

[[image:image-20220824145428-3.png||height="308" width="1200"]]

==== (% style="color:blue" %)**Set RS485 Sampling Commands**(%%) ====

(((

AT+COMMANDx or AT+DATACUTx

)))

(((

These three commands are used to configure how the RS485-LN polling data from Modbus device. Detail of usage please see : [[polling RS485 device>>||anchor="H3.3.3Configurereadcommandsforeachsampling"]].

)))

(((

)))

* (((

(% style="color:#037691" %)**AT Command:**

825

)))

826

827

(% style="color:#4472c4" %)** AT+COMMANDx: ** (%%) Configure RS485 read command to sensor.

828

829

(% style="color:#4472c4" %)** AT+DATACUTx: **(%%) Configure how to handle return from RS485 devices.

* (((

(% style="color:#037691" %)**Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0xAF**(%%) downlink command can be used to set AT+COMMANDx or AT+DATACUTx.

)))

(((

(% style="color:red" %)**Note : if user use AT+COMMANDx to add a new command, he also need to send AT+DATACUTx downlink.**

)))

(((

Format: (% style="color:#4472c4" %)** AF MM NN LL XX XX XX XX YY**

)))

(((

Where:

)))

* (((

MM: the ATCOMMAND or AT+DATACUT to be set. Value from 01 ~~ 0F,

858

)))

859

* (((

860

NN: 0: no CRC; 1: add CRC-16/MODBUS ; 2: set the AT+DATACUT value.

861

)))

862

* (((

863

LL: The length of AT+COMMAND or AT+DATACUT command

864

)))

865

* (((

866

XX XX XX XX: AT+COMMAND or AT+DATACUT command

867

)))

868

* (((

869

YY: If YY=0, RS485-LN will execute the downlink command without uplink; if YY=1, RS485-LN will execute an uplink after got this command.

)))

(((

**Example:**

)))

(((

(% style="color:#037691" %)**AF 03 01 06 0A 05 00 04 00 01 00**(%%): Same as AT+COMMAND3=0A 05 00 04 00 01,1

)))

(((

(% style="color:#037691" %)**AF 03 02 06**(% style="color:orange" %)** 10 **(% style="color:red" %)**01 **(% style="color:green" %)**05 06 09 0A**(% style="color:#037691" %)** 00**(%%): Same as AT+DATACUT3=(% style="color:orange" %)**16**(%%),(% style="color:red" %)**1**(%%),(% style="color:green" %)**5+6+9+10**

)))

(((

(% style="color:#037691" %)**AF 03 02 06 **(% style="color:orange" %)**0B**(% style="color:red" %)** 02 **(% style="color:green" %)**05 07 08 0A **(% style="color:#037691" %)**00**(%%): Same as AT+DATACUT3=(% style="color:orange" %)**11**(%%),(% style="color:red" %)**2**(%%),(% style="color:green" %)**5~~7+8~~10**

)))

==== (% style="color:blue" %)**Fast command to handle MODBUS device**(%%) ====

(((

(% style="color:#4472c4" %)** AT+MBFUN**(%%) is valid since v1.3 firmware version. The command is for fast configure to read Modbus devices. It is only valid for the devices which follow the [[MODBUS-RTU protocol>>url:https://www.modbustools.com/modbus.html]].

)))

(((

This command is valid since v1.3 firmware version

)))

(((

AT+MBFUN can auto read the Modbus function code: 01, 02, 03 or 04. AT+MBFUN has lower priority vs AT+DATACUT command. If AT+DATACUT command is configured, AT+MBFUN will be ignore.

)))

(((

)))

(((

**Example:**

)))

* (((

AT+MBFUN=1 and AT+DATACUT1/AT+DATACUT2 are not configure (0,0,0). So RS485-LN.

918

)))

919

* (((

920

AT+COMMAND1= 01 03 00 10 00 08,1 ~-~-> read slave address 01 , function code 03, start address 00 01, quantity of registers 00 08.

921

)))

922

* (((

923

AT+COMMAND2= 01 02 00 40 00 10,1 ~-~-> read slave address 01 , function code 02, start address 00 40, quantity of inputs 00 10.

)))

(% aria-label="image-20220602165351-6.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602165351-6.png||data-widget="image"]]

929

930

(% title="Click and drag to resize" %)

931

932

(% aria-label="image-20220602165351-7.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602165351-7.png||data-widget="image"]](% title="Click and drag to resize" %)

==== (% style="color:blue" %)**RS485 command timeout**(%%) ====

(((

Some Modbus device has slow action to send replies. This command is used to configure the RS485-LN to use longer time to wait for their action.

)))

(((

Default value: 0, range: 0 ~~ 65 seconds

)))

(((

* (% style="color:#037691" %)** AT Command:**

950

951

(% style="color:#4472c4" %)** AT+CMDDLaa=hex(bb cc)*1000**

)))

(((

**Example:**

)))

(((

(% style="color:#4472c4" %)** AT+CMDDL1=1000** (%%)to send the open time to 1000ms

)))

(((

)))

* (((

(% style="color:#037691" %)** Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0x AA aa bb cc**(%%) Same as: AT+CMDDLaa=hex(bb cc)*1000

)))

(((

**Example:**

)))

(((

**0xAA 01 00 01** ~-~-> Same as **AT+CMDDL1=1000 ms**

)))

==== (% style="color:blue" %)**Uplink payload mode**(%%) ====

(((

Define to use one uplink or multiple uplinks for the sampling.

)))

(((

The use of this command please see: [[Compose Uplink payload>>||anchor="H3.3.4Composetheuplinkpayload"]]

)))

(((

* (% style="color:#037691" %)** AT Command:**

1004

1005

(% style="color:#4472c4" %)** AT+DATAUP=0**

1006

1007

(% style="color:#4472c4" %)** AT+DATAUP=1**

)))

(% style="color:#4472c4" %)** 0xAD 01 00 00 14** (%%) **~-~->** Same as AT+DATAUP=1，20000 ~/~/ (00 00 14 is 20 seconds)

1013

1014

Each uplink is sent to the server at 20-second intervals when segmented.

* (((

(% style="color:#037691" %)** Downlink Payload:**

1019

)))

1020

1021

(% style="color:#4472c4" %)** 0xAD 00** (%%) **~-~->** Same as AT+DATAUP=0

1022

1023

(% style="color:#4472c4" %)** 0xAD 01** (%%) **~-~->** Same as AT+DATAUP=1 ~/~/Each uplink is sent to the server one after the other as it is segmented.

* (((

(% style="color:#037691" %)** AT Command:**

1028

)))

1029

1030

(% style="color:#4472c4" %)** AT+DATAUP=1,Timeout**

* (((

(% style="color:#037691" %)** Downlink Payload:**

1035

)))

1036

1037

(% style="color:#4472c4" %)** 0xAD 01 00 00 14** (%%) **~-~->** Same as AT+DATAUP=1，20000 ~/~/ (00 00 14 is 20 seconds)

1038

1039

Each uplink is sent to the server at 20-second intervals when segmented.

==== (% style="color:blue" %)**Manually trigger an Uplink**(%%) ====

(((

Ask device to send an uplink immediately.

)))

* (((

(% style="color:#037691" %)** AT Command:**

)))

(((

No AT Command for this, user can press the [[ACT button>>||anchor="H3.7Buttons"]] for 1 second for the same.

)))

(((

)))

* (((

(% style="color:#037691" %)** Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0x08 FF**(%%), RS485-LN will immediately send an uplink.

)))

==== (% style="color:blue" %)**Clear RS485 Command**(%%) ====

(((

The AT+COMMANDx and AT+DATACUTx settings are stored in special location, user can use below command to clear them.

)))

* (((

(% style="color:#037691" %)** AT Command:**

)))

(((

(% style="color:#4472c4" %)** AT+CMDEAR=mm,nn** (%%) mm: start position of erase ,nn: stop position of erase

)))

(((

Etc. AT+CMDEAR=1,10 means erase AT+COMMAND1/AT+DATACUT1 to AT+COMMAND10/AT+DATACUT10

)))

(((

Example screen shot after clear all RS485 commands.

)))

(((

)))

(((

The uplink screen shot is:

1107

)))

1108

1109

(% aria-label="1654160691922-496.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654160691922-496.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

* (((

(% style="color:#037691" %)** Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0x09 aa bb** (%%) same as AT+CMDEAR=aa,bb

)))

==== (% style="color:blue" %)**Set Serial Communication Parameters**(%%) ====

(((

Set the Rs485 serial communication parameters:

)))

(((

(% style="color:#037691" %)**AT Command:**

)))

(((

* Set Baud Rate

)))

(% style="color:#4472c4" %)** AT+BAUDR=9600** (%%) ~/~/ Options: (200~~115200) When using low baud rate or receiving multiple bytes, you need to use AT+CMDDL to increase the receive timeout (the default receive timeout is 400ms), otherwise data will be lost

(((

* Set UART Parity

)))

(% style="color:#4472c4" %)** AT+PARITY=0** (%%) ~/~/ Option: 0: no parity, 1: odd parity, 2: even parity

(((

* Set STOPBIT

)))

(% style="color:#4472c4" %)** AT+STOPBIT=0** (%%) ~/~/ Option: 0 for 1bit; 1 for 1.5 bit ; 2 for 2 bits

(((

(% style="color:#037691" %)**Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** A7 01 aa bb**: (%%) Same AT+BAUDR=hex(aa bb)*100

)))

(((

**Example:**

)))

* (((

A7 01 00 60 same as AT+BAUDR=9600

1169

)))

1170

* (((

1171

A7 01 04 80 same as AT+BAUDR=115200

)))

(((

* A7 02 aa: Same as AT+PARITY=aa (aa value: 00 , 01 or 02)

)))

(((

* A7 03 aa: Same as AT+STOPBIT=aa (aa value: 00 , 01 or 02)

)))

==== (% style="color:blue" %)**Configure Databit (Since Version 1.4.0)**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1190

)))

1191

1192

(% style="color:#4472c4" %)** AT+DATABIT=7 **(%%)~/~/ Set the data bits to 7

1193

1194

(% style="color:#4472c4" %)** AT+DATABIT=8 **(%%)~/~/ Set the data bits to 8

1195

1196

* (((

1197

(% style="color:#037691" %)**Downlink Payload:**

1198

)))

1199

1200

(% style="color:#4472c4" %)** A7 04 07**(%%): Same as AT+DATABIT=7

1201

1202

(% style="color:#4472c4" %)** A7 04 08**(%%): Same as AT+DATABIT=8

==== (% style="color:blue" %)**Encrypted payload**(%%) ====

(((

)))

* (((

(% style="color:#037691" %)** AT Command:**

1214

)))

1215

1216

(% style="color:#4472c4" %)** AT+DECRYPT=1 ** (%%) ~/~/ The payload is uploaded without encryption

1217

1218

(% style="color:#4472c4" %)** AT+DECRYPT=0 ** (%%) ~/~/ Encrypt when uploading payload (default)

==== (% style="color:blue" %)**Get sensor value**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1228

)))

1229

1230

(% style="color:#4472c4" %)** AT+GETSENSORVALUE=0 **(%%) ~/~/ The serial port gets the reading of the current sensor

1231

1232

(% style="color:#4472c4" %)** AT+GETSENSORVALUE=1 **(%%) ~/~/ The serial port gets the current sensor reading and uploads it.

==== (% style="color:blue" %)**Resets the downlink packet count**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1242

)))

1243

1244

(% style="color:#4472c4" %)** AT+DISFCNTCHECK=0 **(%%) ~/~/ When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node will no longer receive downlink packets (default)

1245

1246

(% style="color:#4472c4" %)** AT+DISFCNTCHECK=1 **(%%) ~/~/ When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node resets the downlink packet count and keeps it consistent with the server downlink packet count.

==== (% style="color:blue" %)**When the limit bytes are exceeded, upload in batches**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1256

)))

1257

1258

(% style="color:#4472c4" %)** AT+DISMACANS=0** (%%) ~/~/ When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of 11 bytes (DR0 of US915, DR2 of AS923, DR2 of AU195), the node will send a packet with a payload of 00 and a port of 4. (default)

1259

1260

(% style="color:#4472c4" %)** AT+DISMACANS=1** (%%) ~/~/ When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of the DR, the node will ignore the MACANS and not reply, and only upload the payload part.

* (((

(% style="color:#037691" %)** Downlink Payload:**

1265

)))

1266

1267

(% style="color:#4472c4" %)** 0x21 00 01 ** (%%) ~/~/ Set the DISMACANS=1

==== (% style="color:blue" %)** Copy downlink to uplink **(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1277

)))

1278

1279

(% style="color:#4472c4" %)** AT+RPL=5** (%%) ~/~/ After receiving the package from the server, it will immediately upload the content of the package to the server, the port number is 100.

1280

1281

Example：**aa xx xx xx xx** ~/~/ aa indicates whether the configuration has changed, 00 is yes, 01 is no; xx xx xx xx are the bytes sent.

1282

1283

1284

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173747-6.png?width=1124&height=165&rev=1.1||alt="image-20220823173747-6.png"]]

1285

1286

For example, sending 11 22 33 44 55 66 77 will return invalid configuration 00 11 22 33 44 55 66 77.

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173833-7.png?width=1124&height=149&rev=1.1||alt="image-20220823173833-7.png"]]

1291

1292

For example, if 01 00 02 58 is issued, a valid configuration of 01 01 00 02 58 will be returned.

==== (% style="color:blue" %)**Query version number and frequency band 、TDC**(%%) ====

(((

* (% style="color:#037691" %)**Downlink Payload:**

1302

1303

(% style="color:#4472c4" %)** 26 01 ** (%%) ~/~/ Downlink 26 01 can query device upload frequency, frequency band, software version number, TDC time.

)))

Example：

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173929-8.png?width=1205&height=76&rev=1.1||alt="image-20220823173929-8.png"]]

==== (% style="color:blue" %)** Monitor RS485 communication of other devices**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1320

)))

1321

1322

(% style="color:#4472c4" %)**AT+RXMODE=1,10** (%%) ~/~/ When the RS485-LN receives more than 10 bytes from the RS485, it immediately sends the uplink of the received data.

1323

1324

(% style="color:#4472c4" %)**AT+RXMODE=2,500 ** (%%) ~/~/ RS485-LN uploads data as uplink from the first byte received by RS485 to the data received within 500ms after that.

1325

1326

(% style="color:#4472c4" %)**AT+RXMODE=0,0 ** (%%) ~/~/ Disable this mode (default)

* (((

(% style="color:#037691" %)**Downlink Payload:**

1331

)))

1332

1333

(% style="color:#4472c4" %)** A6 aa bb bb ** (%%) ~/~/ same as AT+RXMODE=aa,bb

1334

1335

[[image:image-20220824144240-1.png]]

1336

1337

1338

== 3.6 Listening mode for RS485 network ==

(((

This feature support since firmware v1.4

)))

(((

RS485-LN supports listening mode, it can listen the RS485 network packets and send them via LoRaWAN uplink. Below is the structure. The blue arrow shows the RS485 network packets to RS485-LN.

)))

(% aria-label="image-20220602171200-8.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602171200-8.png||data-widget="image" height="567" width="1007"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]

1352

1353

(% title="Click and drag to resize" %)

1354

1355

(((

1356

To enable the listening mode, use can run the command (% style="color:#4472c4" %)** AT+RXMODE**.

)))

(((

)))

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)

1364

|=(% style="width: 100px;" %)(((

1365

**Command example**

1366

)))|=(% style="width: 400px;" %)(((

1367

**Function**

1368

)))

1369

|(% style="width:100px" %)(((

1370

AT+RXMODE=1,10

1371

)))|(% style="width:400px" %)(((

1372

Enable listening mode 1, if RS485-LN has received more than 10 RS485 commands from the network. RS485-LN will send these commands via LoRaWAN uplinks.

1373

)))

1374

|(% style="width:100px" %)(((

1375

AT+RXMODE=2,500

1376

)))|(% style="width:400px" %)(((

1377

Enable listening mode 2, RS485-LN will capture and send a 500ms content once from the first detect of character. Max value is 65535 ms

1378

)))

1379

|(% style="width:100px" %)(((

1380

AT+RXMODE=0,0

1381

)))|(% style="width:400px" %)(((

1382

Disable listening mode. This is the default settings.

1383

)))

1384

|(% style="width:100px" %)(((

1385

1386

)))|(% style="width:400px" %)(((

1387

A6 aa bb cc same as AT+RXMODE=aa,(bb<<8 | cc)

)))

(((

(% style="color:#037691" %)**Downlink Command:**

)))

(((

(% style="color:#4472c4" %)** 0xA6 aa bb cc **(%%) same as AT+RXMODE=aa,(bb<<8 | cc)

)))

(((

)))

(((

**Example**:

)))

(((

The RS485-LN is set to AT+RXMODE=2,1000

)))

(((

There is a two Modbus commands in the RS485 network as below:

)))

(((

The Modbus master send a command: (% style="background-color:#ffc000" %)**01 03 00 00 00 02 c4 0b**

)))

(((

And Modbus slave reply with: (% style="background-color:green" %)**01 03 04 00 00 00 00 fa 33**

)))

(((

RS485-LN will capture both and send the uplink: (% style="background-color:#ffc000" %)**01 03 00 00 00 02 c4 0b **(% style="background-color:green" %)**01 03 04 00 00 00 00 fa 33**

)))

(((

(% aria-label="image-20220602171200-9.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602171200-9.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

)))

(((

)))

(((

(((

(% style="color:red" %)**Notice: Listening mode can work with the default polling mode of RS485-LN. When RS485-LN is in to send the RS485 commands (from AT+COMMANDx), the listening mode will be interrupt for a while.**

)))

)))

== 3.7 Buttons ==

(% border="1.5" cellspacing="4" style="background-color:#ffffcc; width:430px" %)

1449

|=(% style="width: 50px;" %)**Button**|=(% style="width: 380px;" %)**Feature**

1450

|(% style="width:50px" %)**ACT**|(% style="width:361px" %)If RS485 joined in network, press this button for more than 1 second, RS485 will upload a packet, and the SYS LED will give a (% style="color:blue" %)**Blue blink**

1451

|(% style="width:50px" %)**RST**|(% style="width:361px" %)Reboot RS485

1452

|(% style="width:50px" %)**PRO**|(% style="width:361px" %)Use for upload image, see [[How to Update Image>>||anchor="H6.1Howtoupgradetheimage3F"]]

== 3.8 LEDs ==

(% border="1.5" cellspacing="4" style="background-color:#ffffcc; width:430px" %)

1460

|=(% style="width: 50px;" %)**LEDs**|=(% style="width: 380px;" %)**Feature**

1461

|**PWR**|Always on if there is power

1462

|**SYS**|After device is powered on, the SYS will (% style="color:green" %)**fast blink in GREEN**(%%) for 5 times, means RS485-LN start to join LoRaWAN network. If join success, SYS will be (% style="color:green" %)**on GREEN for 5 seconds** (%%)**. **SYS will (% style="color:green" %)**blink Blue**(%%) on every upload and (% style="color:green" %)**blink Green**(%%) once receive a downlink message.

= 4. Case Study =

User can check this URL for some case studies: [[APP RS485 COMMUNICATE WITH SENSORS>>doc:Main.Application Note \: Communicate with Different Sensors ----- RS485-LN RS485-BL.WebHome]]

1470

1471

1472

= 5. Use AT Command =

1473

1474

== 5.1 Access AT Command ==

(((

RS485-LN supports AT Command set. User can use a USB to TTL adapter plus the 3.5mm Program Cable to connect to RS485-LN to use AT command, as below.

)))

(% aria-label="1654162355560-817.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162355560-817.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

In PC, User needs to set (% style="color:blue" %)**serial tool**(%%)(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console of RS485-LN. The default password is 123456. Below is the output for reference:

)))

(% aria-label="1654162368066-342.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162368066-342.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

More detail AT Command manual can be found at [[AT Command Manual>>https://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/]]

)))

== 5.2 Common AT Command Sequence ==

1502

1503

=== 5.2.1 Multi-channel ABP mode (Use with SX1301/LG308) ===

1504

1505

1506

If device has not joined network yet:

1507

1508

* (% style="color:#037691" %)**AT+FDR**

1509

* (% style="color:#037691" %)**AT+NJM=0**

1510

* (% style="color:#037691" %)**ATZ**

(((

If device already joined network:

1516

1517

* (% style="color:#037691" %)**AT+NJM=0**

1518

* (% style="color:#037691" %)**ATZ**

)))

=== 5.5.2 Single-channel ABP mode (Use with LG01/LG02) ===

1526

1527

1528

(% style="background-color:#dcdcdc" %)**AT+FDR** (%%) Reset Parameters to Factory Default, Keys Reserve

1529

1530

(% style="background-color:#dcdcdc" %)**AT+NJM=0 **(%%) Set to ABP mode

1531

1532

(% style="background-color:#dcdcdc" %)**AT+ADR=0** (%%) Set the Adaptive Data Rate Off

1533

1534

(% style="background-color:#dcdcdc" %)**AT+DR=5** (%%) Set Data Rate

1535

1536

(% style="background-color:#dcdcdc" %)**AT+TDC=60000** (%%) Set transmit interval to 60 seconds

1537

1538

(% style="background-color:#dcdcdc" %)**AT+CHS=868400000**(%%) Set transmit frequency to 868.4Mhz

1539

1540

(% style="background-color:#dcdcdc" %)**AT+RX2FQ=868400000** (%%) Set RX2Frequency to 868.4Mhz (according to the result from server)

1541

1542

(% style="background-color:#dcdcdc" %)**AT+RX2DR=5** (%%) Set RX2DR to match the downlink DR from server. see below

1543

1544

(% style="background-color:#dcdcdc" %)**AT+DADDR=26** (%%) 01 1A F1 Set Device Address to 26 01 1A F1, this ID can be found in the LoRa Server portal.

1545

1546

(% style="background-color:#dcdcdc" %)**ATZ** (%%) Reset MCU

1547

1548

1549

(% style="color:red" %)**Note:**

1550

1551

(((

1552

(% style="color:red" %)1. Make sure the device is set to ABP mode in the IoT Server.

1553

2. Make sure the LG01/02 gateway RX frequency is exactly the same as AT+CHS setting.

1554

3. Make sure SF / bandwidth setting in LG01/LG02 match the settings of AT+DR. refer [[this link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/&file=LoRaWAN%201.0.3%20Regional%20Parameters.xlsx]] to see what DR means.

1555

4. The command AT+RX2FQ and AT+RX2DR is to let downlink work. to set the correct parameters, user can check the actually downlink parameters to be used. As below. Which shows the RX2FQ should use 868400000 and RX2DR should be 5

)))

(% aria-label="1654162478620-421.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162478620-421.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

= 6. FAQ =

== 6.1 How to upgrade the image? ==

(((

The RS485-LN LoRaWAN Controller is shipped with a 3.5mm cable, the cable is used to upload image to RS485-LN to:

)))

* (((

Support new features

)))

* (((

For bug fix

)))

* (((

Change LoRaWAN bands.

)))

(((

Below shows the hardware connection for how to upload an image to RS485-LN:

1584

)))

1585

1586

(% aria-label="1654162535040-878.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162535040-878.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]

1587

1588

(% title="Click and drag to resize" %)

1589

1590

(((

1591

(% style="color:blue" %)**Step1**(%%)**:** Download [[flash loader>>url:https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/flasher-stm32.html]].

)))

(((

(% style="color:blue" %)**Step2**(%%)**:** Download the [[LT Image files>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AACP33wo_ZQLsxW2MJ70oUoba/RS485-LN/Firmware?dl=0&subfolder_nav_tracking=1]].

)))

(((

(% style="color:blue" %)**Step3**(%%)**: **Open flashloader; choose the correct COM port to update.

)))

(((

(((

(((

(% style="color:blue" %) Hold down the PRO button and then momentarily press the RST reset button and the SYS led will change from OFF to ON, While SYS LED is RED ON, it means the RS485-LN is ready to be program.

)))

)))

)))

(% aria-label="image-20220602175818-12.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175818-12.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

1618

1619

1620

(% aria-label="image-20220602175848-13.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175848-13.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

1621

1622

1623

(% aria-label="image-20220602175912-14.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175912-14.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

1624

1625

1626

(% style="color:red" %)**Notice**: **In case user has lost the program cable. User can hand made one from a 3.5mm cable. The pin mapping is:**

1627

1628

(% aria-label="image-20220602175638-10.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175638-10.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

1629

1630

1631

== 6.2 How to change the LoRa Frequency Bands/Region? ==

1632

1633

1634

User can follow the introduction for [[how to upgrade image>>||anchor="H6.1Howtoupgradetheimage3F"]]. When download the images, choose the required image file for download.

1635

1636

1637

== 6.3 How many RS485-Slave can RS485-LN connects? ==

1638

1639

1640

The RS485-LN can support max 32 RS485 devices. Each uplink command of RS485-LN can support max 16 different RS485 command. So RS485-LN can support max 16 RS485 devices pre-program in the device for uplink. For other devices no pre-program, user can use the [[downlink message (type code 0xA8) to poll their info>>||anchor="H3.3.3Configurereadcommandsforeachsampling"]].

1641

1642

1643

== 6.4 Compatible question to ChirpStack and TTI LoRaWAN server ? ==

1644

1645

1646

When user need to use with ChirpStack or TTI. Please set AT+RPL=4.

1647

1648

Detail info check this link: [[Set Packet Receiving Response Level>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H7.23SetPacketReceivingResponseLevel"]]

1649

1650

1651

== 6.5 Can i use point to point communication for RS485-LN? ==

1652

1653

1654

Yes, please updating point-to-point [[firmware>>https://www.dropbox.com/sh/g99v0fxcltn9r1y/AACP33wo_ZQLsxW2MJ70oUoba/RS485-LN/Firmware?dl=0&subfolder_nav_tracking=1]]，then refer [[Point to Point Communication for RS485-LN>>Point to Point Communication for RS485-LN]].

1655

1656

1657

== 6.6 How to Use RS485-LN to connect to RS232 devices? ==

1658

1659

1660

[[Use RS485-BL or RS485-LN to connect to RS232 devices. - DRAGINO>>url:http://8.211.40.43:8080/xwiki/bin/view/Main/RS485%20to%20RS232/]]

1661

1662

1663

== 6.7 How to judge whether there is a problem with the set COMMAND ==

1664

1665

=== 6.7.1 Introduce: ===

1666

1667

1668

Users can use below the structure to fast debug the communication between RS485BL and RS485-LN. The principle is to put the PC in the RS485 network and sniff the packet between Modbus MTU and RS485-BL/LN. We can use this way to:

1669

1670

1. Test if Modbus-MTU works with PC commands.

1671

1. Check if RS485-LN sent the expected command to Mobus-MTU

1672

1. Check if Modbus-MTU return back the expected result to RS485-LN.

1673

1. If both b) and c) has issue, we can compare PC’s output and RS485-LN output.

1674

1675

[[image:image-20221130104310-1.png||height="380" width="680"]]

Example Connection:

[[image:image-20221130104310-2.png]]

1681

1682

1683

=== 6.7.2 Set up PC to monitor RS485 network With Serial tool ===

1684

1685

1686

(% style="color:red" %)**Note: Receive and send set to hex mode**

1687

1688

[[image:image-20221130104310-3.png||height="616" width="714"]]

1689

1690

1691

=== 6.7.3 With ModRSsim2: ===

1692

1693

1694

(% style="color:blue" %)**(1) Select serial port MODBUS RS-232**

1695

1696

[[image:image-20221130104310-4.png||height="390" width="865"]]

1697

1698

1699

(% style="color:blue" %)**(2) Click the serial port icon**

1700

1701

[[image:image-20221130104310-5.png||height="392" width="870"]]

1702

1703

1704

(% style="color:blue" %)**(3) After selecting the correct serial port and baud rate, click ok**

1705

1706

[[image:image-20221130104310-6.png]]

1707

1708

1709

(% style="color:blue" %)**(4) Click the comms.**

1710

1711

[[image:image-20221130104310-7.png||height="376" width="835"]]

1712

1713

(% class="wikigeneratedid" id="HRunRS485-LN2FBLcommandandmonitorifitiscorrect." %)

1714

**Run RS485-LN/BL command and monitor if it is correct.**

1715

1716

1717

=== 6.7.4 Example – Test the CFGDEV command ===

1718

1719

1720

RS485-LN sent below command:

1721

1722

(% style="color:blue" %)**AT+CFGDEV=01 03 20 00 01 85 c0,1**(%%) to RS485 network, and PC is able to get this command and return commands from MTU to show in the serial tool.

1723

1724

1725

We can see the output from the Serial port tool to analyze. And check if they are expected result.

1726

1727

[[image:image-20221130104310-8.png||height="214" width="797"]]

1728

1729

1730

We can also use (% style="color:blue" %)**ModRSsim2**(%%) to see the output.

1731

1732

[[image:image-20221130104310-9.png||height="531" width="729"]]

1733

1734

1735

=== 6.7.5 Example – Test CMD command sets. ===

1736

1737

1738

Run (% style="color:blue" %)**AT+SENSORVALUE=1**(%%) to test the CMD commands set in RS485-LN.

1739

1740

1741

(% style="color:blue" %)**Serial port tool:**

1742

1743

[[image:image-20221130104310-10.png||height="339" width="844"]]

1744

1745

1746

(% style="color:blue" %)**ModRSsim2:**

1747

1748

[[image:image-20221130104310-11.png||height="281" width="962"]]

1749

1750

1751

=== 6.7.6 Test with PC ===

1752

1753

1754

If there is still have problem to set up correctly the commands between RS485-LN and MTU. User can test the correct RS485 command set in PC and compare with the RS485 command sent out via RS485-LN. as long as both commands are the same, the MTU should return correct result.

1755

1756

1757

Or User can send the working commands set in PC serial tool to Dragino Support to check what should be configured in RS485-LN.

1758

1759

(% style="color:blue" %)**Connection method：**

1760

1761

[[image:image-20221130104310-12.png]]

1762

1763

1764

(% style="color:blue" %)**Link situation:**

1765

1766

[[image:image-20221130104310-13.png||height="458" width="486"]]

1767

1768

1769

[[image:image-20221130104310-14.png||height="371" width="823"]]

1770

1771

1772

= 7. Trouble Shooting =

1773

1774

== 7.1 Downlink doesn't work, how to solve it? ==

1775

1776

1777

Please see this link for debug: [[LoRaWAN Communication Debug>>doc:Main.LoRaWAN Communication Debug.WebHome]]

1778

1779

1780

== 7.2 Why I can't join TTN V3 in US915 /AU915 bands? ==

1781

1782

1783

It might about the channels mapping. Please see for detail: [[Notice of Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]

= 8. Order Info =

(% style="color:blue" %)**Part Number: RS485-LN-XXX**

1790

1791

(% style="color:blue" %)**XXX:**

1792

1793

* (% style="color:red" %)**EU433**(%%): frequency bands EU433

1794

* (% style="color:red" %)**EU868**(%%): frequency bands EU868

1795

* (% style="color:red" %)**KR920**(%%): frequency bands KR920

1796

* (% style="color:red" %)**CN470**(%%): frequency bands CN470

1797

* (% style="color:red" %)**AS923**(%%): frequency bands AS923

1798

* (% style="color:red" %)**AU915**(%%): frequency bands AU915

1799

* (% style="color:red" %)**US915**(%%): frequency bands US915

1800

* (% style="color:red" %)**IN865**(%%): frequency bands IN865

1801

* (% style="color:red" %)**RU864**(%%): frequency bands RU864

1802

* (% style="color:red" %)**KZ865**(%%): frequency bands KZ865

= 9.Packing Info =

**Package Includes**:

1810

1811

* RS485-LN x 1

1812

* Stick Antenna for LoRa RF part x 1

1813

* Program cable x 1

1814

1815

**Dimension and weight**:

1816

1817

* Device Size: 13.5 x 7 x 3 cm

1818

* Device Weight: 105g

1819

* Package Size / pcs : 14.5 x 8 x 5 cm

1820

* Weight / pcs : 170g

= 10. FCC Caution for RS485LN-US915 =

(((

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

)))

(((

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

)))

(((

)))

(((

(% style="color:red" %)**IMPORTANT NOTE:**

)))

(((

(% style="color:red" %)**Note: **(%%)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

)))

(((

—Reorient or relocate the receiving antenna.

)))

(((

—Increase the separation between the equipment and receiver.

)))

(((

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

)))

(((

—Consult the dealer or an experienced radio/TV technician for help.

)))

(((

)))

(((

(% style="color:red" %)**FCC Radiation Exposure Statement:**

)))

(((

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

)))

= 11. Support =

* (((

Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1881

)))

1882

* (((

1883

Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].

)))

Wiki source code of RS485-LN – RS485 to LoRaWAN Converter User Manual

Applications

Navigation