RS485-LN – RS485 to LoRaWAN Converter User Manual

(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||height="15" role="presentation" title="Click and drag to move" width="15"]]

20

)))

21

= 1. Introduction =

== 1.1 What is RS485-LN RS485 to LoRaWAN Converter ==

(((

The Dragino RS485-LN is a (% style="color:blue" %)**RS485 to LoRaWAN Converter**(%%). It converts the RS485 signal into LoRaWAN wireless signal which simplify the IoT installation and reduce the installation/maintaining cost.

)))

(((

RS485-LN allows user to (% style="color:blue" %)**monitor / control RS485 devices**(%%) and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.

)))

(((

(% style="color:blue" %)**For data uplink**(%%), RS485-LN sends user-defined commands to RS485 devices and gets the return from the RS485 devices. RS485-LN will process these returns according to user-define rules to get the final payload and upload to LoRaWAN server.

)))

(((

(% style="color:blue" %)**For data downlink**(%%), RS485-LN runs in LoRaWAN Class C. When there downlink commands from LoRaWAN server, RS485-LN will forward the commands from LoRaWAN server to RS485 devices.

)))

(((

(% style="color:blue" %)**Demo Dashboard for RS485-LN**(%%) connect to two energy meters: [[https:~~/~~/app.datacake.de/dashboard/d/58844a26-378d-4c5a-aaf5-b5b5b153447a>>url:https://app.datacake.de/dashboard/d/58844a26-378d-4c5a-aaf5-b5b5b153447a]](% title="Click and drag to resize" %)

)))

== 1.2 Specifications ==

55

56

57

(% style="color:#037691" %)**Hardware System:**

58

59

* STM32L072xxxx MCU

60

* SX1276/78 Wireless Chip

61

* Power Consumption (exclude RS485 device):

62

** Idle: 32mA@12v

63

** 20dB Transmit: 65mA@12v

64

65

(% style="color:#037691" %)**Interface for Model:**

66

67

* RS485

68

* Power Input 7~~ 24V DC.

69

70

(% style="color:#037691" %)**LoRa Spec:**

71

72

* Frequency Range:

73

** Band 1 (HF): 862 ~~ 1020 Mhz

74

** Band 2 (LF): 410 ~~ 528 Mhz

75

* 168 dB maximum link budget.

76

* +20 dBm - 100 mW constant RF output vs.

77

* +14 dBm high efficiency PA.

78

* Programmable bit rate up to 300 kbps.

79

* High sensitivity: down to -148 dBm.

80

* Bullet-proof front end: IIP3 = -12.5 dBm.

81

* Excellent blocking immunity.

82

* Low RX current of 10.3 mA, 200 nA register retention.

83

* Fully integrated synthesizer with a resolution of 61 Hz.

84

* FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.

85

* Built-in bit synchronizer for clock recovery.

86

* Preamble detection.

87

* 127 dB Dynamic Range RSSI.

88

* Automatic RF Sense and CAD with ultra-fast AFC.

89

* Packet engine up to 256 bytes with CRC

== 1.3 Features ==

* LoRaWAN Class A & Class C protocol (default Class C)

95

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864/MA869

96

* AT Commands to change parameters

97

* Remote configure parameters via LoRa Downlink

98

* Firmware upgradable via program port

99

* Support multiply RS485 devices by flexible rules

100

* Support Modbus protocol

101

* Support Interrupt uplink (Since hardware version v1.2)

102

103

== 1.4 Applications ==

104

105

106

* Smart Buildings & Home Automation

107

* Logistics and Supply Chain Management

* Smart Metering

* Smart Agriculture

* Smart Cities

* Smart Factory

== 1.5 Firmware Change log ==

114

115

116

[[RS485-LN Image files – Download link and Change log>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/]]

117

118

119

== 1.6 Hardware Change log ==

(((

(((

(((

v1.2: Add External Interrupt Pin.

)))

(((

v1.0: Release

)))

== 1.7 Pin Definitions ==

134

135

136

The following diagram shows the V1.2 hardware version.

137

138

[[image:image-20240928101253-2.jpeg||height="542" width="542"]]

139

140

[[image:image-20240925161157-2.jpeg||height="367" width="545"]]

)))

)))

= 2. Power ON Device =

(((

The RS485-LN can be powered by 7 ~~ 24V DC power source. Connection as below

151

152

* Power Source VIN to RS485-LN VIN+

153

* Power Source GND to RS485-LN VIN-

154

155

(((

156

Once there is power, the RS485-LN will be on.

157

)))

158

159

(% aria-label="1653268091319-405.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653268091319-405.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

)))

= 3. Operation Mode =

165

166

== 3.1 How it works? ==

(((

(((

The RS485-LN is configured as LoRaWAN OTAA Class C mode by default. It has OTAA keys to join network. To connect a local LoRaWAN network, user just need to input the OTAA keys in the network server and power on the RS485-LN. It will auto join the network via OTAA.

)))

)))

== 3.2 Example to join LoRaWAN network ==

178

179

180

Here shows an example for how to join the TTN V3 Network. Below is the network structure, we use [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]] as LoRaWAN gateway here.

181

182

[[image:image-20240928102637-3.png||height="522" width="917"]]

183

184

(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]

(((

(((

The RS485-LN in this example connected to two RS485 devices for demonstration, user can connect to other RS485 devices via the same method. The connection is as below:

)))

(((

485A+ and 485B- of the sensor are connected to RS485A and RA485B of RS485-LN respectively.

)))

(% aria-label="1653268227651-549.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653268227651-549.png||data-widget="image" height="592" width="720"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

The LG308 is already set to connect to [[TTN V3 network >>path:https://www.thethingsnetwork.org/]]. So what we need to now is only configure the TTN V3:

)))

(((

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from RS485-LN.

)))

(((

Each RS485-LN is shipped with a sticker with unique device EUI:

)))

)))

(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]][[image:image-20230425175410-2.png]](% title="Click and drag to resize" %)

(((

(((

User can enter this key in their LoRaWAN Server portal. Below is TTN V3 screen shot:

)))

(((

**Add APP EUI in the application.**

)))

)))

(% aria-label="image-20220519174512-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-1.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

231

232

(% aria-label="image-20220519174512-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-2.png||data-widget="image" height="323" width="720"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

233

234

(% aria-label="image-20220519174512-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-3.png||data-widget="image" height="556" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

235

236

(% aria-label="image-20220519174512-4.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-4.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]

237

238

239

(% title="Click and drag to resize" %)

240

241

You can also choose to create the device manually.

242

243

(% aria-label="1652953542269-423.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953542269-423.png||data-widget="image" height="710" width="723"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

**Add APP KEY and DEV EUI**

248

249

(% aria-label="1652953553383-907.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953553383-907.png||data-widget="image" height="514" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

(% style="color:blue" %)**Step 2**(%%): Power on RS485-LN and it will auto join to the TTN V3 network. After join success, it will start to upload message to TTN V3 and user can see in the panel.

)))

(% aria-label="1652953568895-172.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953568895-172.png||data-widget="image" height="232" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

259

260

261

== 3.3 Configure Device to Read RS485 Sensors ==

262

263

264

There are plenty of RS485 and TTL level devices in the market and each device has different commands to read the valid data. To support these devices in most flexible, RS485-LN supports flexible command set. User can use [[Dragino RS485 Tool>>url:https://www.dropbox.com/sh/us9qecn39fwt8n1/AABREdqUCzEmJMRrfuWuXasoa?dl=0]], [[AT Commands or LoRaWAN Downlink>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/#H3.5ConfigureRS485-LBviaATorDownlink]] Command to configure how RS485-LN should read the sensor and how to handle the return from RS485 or TTL sensors.

(((

(((

(((

(% style="color:red" %)**Note: below description and commands are for firmware version >v1.1, if you have firmware version v1.0. Please check the [[user manual v1.0>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/&file=RS485-LN_UserManual_v1.0.1.pdf]] or upgrade the firmware to v1.1**

)))

=== 3.3.1 Method 1 ~-~- via RS485 Configure Tool ===

275

276

277

Use the RS485 Configure tool is the recommand method. Please see the instruction of how to use the tool:

278

279

* **[[RS485 Configure Tool Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/RS485_Configure_Tool/]]**

280

281

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20231127144411-1.png?width=494&height=368&rev=1.1||alt="image-20231127144411-1.png" height="368" width="494"]]

282

283

284

=== 3.3.2 Method 2 ~-~- via AT Commands ===

)))

)))

==== 3.3.2.1 Configure UART settings for RS485 communication ====

289

290

291

To use RS485-LN to read data from RS485 sensors, connect the RS485-LN A/B traces to the sensors. The related commands for UART settings are:

292

293

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

294

|=(% style="width: 126px; background-color:#4F81BD;color:white" %)(((

295

**AT Commands**

296

)))|=(% style="width: 187px; background-color:#4F81BD;color:white" %)(((

297

**Description**

298

)))|=(% style="width: 197px;background-color:#4F81BD;color:white" %)(((

299

**Example**

300

)))

301

|(% style="width:126px" %)(((

(((

AT+BAUDR

)))

)))|(% style="width:177px" %)(((

308

Set the baud rate (for RS485 connection). Default Value is: 9600.

309

)))|(% style="width:193px" %)(((

(((

AT+BAUDR=9600

)))

(((

Options: (1200,2400,4800,

14400,19200,115200)

)))

)))

|(% style="width:126px" %)(((

320

AT+PARITY

321

)))|(% style="width:177px" %)(((

322

Set UART parity (for RS485 connection)

323

)))|(% style="width:193px" %)(((

(((

AT+PARITY=0

)))

(((

Option: 0: no parity,

1: odd parity,

2: even parity

)))

)))

|(% style="width:126px" %)(((

335

AT+STOPBIT

336

)))|(% style="width:177px" %)(((

337

(((

338

Set serial stopbit (for RS485 connection)

339

)))

340

)))|(% style="width:193px" %)(((

341

(((

342

AT+STOPBIT=0 for 1bit

)))

(((

AT+STOPBIT=1 for 1.5 bit

)))

(((

AT+STOPBIT=2 for 2 bits

)))

)))

=== 3.3.3 Configure sensors ===

(((

Some sensors might need to configure before normal operation. User can configure such sensor via PC and RS485 adapter or through RS485-LN AT Commands (% style="color:#4f81bd" %)**AT+CFGDEV**(%%). Each (% style="color:#4f81bd" %)**AT+CFGDEV **(%%)equals to send a RS485 command to sensors. This command will only run when user input it and won't run during each sampling.

359

)))

360

361

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

362

|=(% style="width: 122px; background-color:#4F81BD;color:white" %)**AT Commands**|=(% style="width: 198px; background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 190px;background-color:#4F81BD;color:white" %)**Example**

363

|(% style="width:122px" %)AT+CFGDEV|(% style="width:196px" %)(((

364

(((

365

This command is used to configure the RS485/TTL devices; they won’t be used during sampling.

)))

(((

AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,

)))

(((

mm: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command

374

)))

375

)))|(% style="width:190px" %)AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,m

376

377

=== 3.3.4 Configure read commands for each sampling ===

(((

During each sampling, we need confirm what commands we need to send to the RS485 sensors to read data. After the RS485 sensors send back the value, it normally include some bytes and we only need a few from them for a shorten payload.

382

383

To save the LoRaWAN network bandwidth, we might need to read data from different sensors and combine their valid value into a short payload.

384

385

This section describes how to achieve above goals.

386

387

During each sampling, the RS485-LN can support 15 commands to read sensors. And combine the return to one or several uplink payloads.

388

389

390

(% style="color:#037691" %)**Each RS485 commands include two parts:**

391

392

393

~1. What commands RS485-LN will send to the RS485 sensors. There are total 15 commands from **AT+COMMAD1**, **ATCOMMAND2**,…, to **AT+COMMANDF**. All commands are of same grammar.

394

395

2. How to get wanted value the from RS485 sensors returns from by 1). There are total 15 AT Commands to handle the return, commands are **AT+DATACUT1**,**AT+DATACUT2**,…, **AT+DATACUTF** corresponding to the commands from 1). All commands are of same grammar.

396

397

3. Some RS485 device might has longer delay on reply, so user can use AT+CMDDL to set the timeout for getting reply after the RS485 command is sent. For example **AT+CMDDL1=1000** to send the open time to 1000ms

398

399

400

After we got the valid value from each RS485 commands, we need to combine them together with the command **AT+DATAUP**.

401

402

Below are examples for the how above AT Commands works.

403

404

405

(% style="color:#037691" %)**AT+COMMANDx **(%%)**: **This command will be sent to RS485 devices during each sampling, Max command length is 14 bytes. The grammar is:

406

407

(% border="1" style="background-color:#f2f2f2; width:499px" %)

408

|(% style="width:496px" %)(((

409

**AT+COMMANDx=xx xx xx xx xx xx xx xx xx xx xx xx,m**

410

411

**xx xx xx xx xx xx xx xx xx xx xx xx: The RS485 command to be sent**

412

413

**m: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command**

414

)))

415

416

For example, if we have a RS485 sensor. The command to get sensor value is: 01 03 0B B8 00 02 46 0A. Where 01 03 0B B8 00 02 is the Modbus command to read the register 0B B8 where stored the sensor value. The 46 0A is the CRC-16/MODBUS which calculate manually.

417

418

In the RS485-LN, we should use this command AT+COMMAND1=01 03 0B B8 00 02,1 for the same.

419

420

421

If a single command exceeds 14 bytes, you can use the command splicing function.

422

423

When AT+CMDDLx=1, the commands of AT+COMMANDx and AT+COMMAND(x+1) will be merged.

424

425

426

**Examples:** To send 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F data it should be configured:

427

428

AT+COMMAND1=00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D,0

AT+COMMAND1=1

AT+COMMAND2=0E 0F,0

(% style="color:#037691" %)**AT+DATACUTx **(%%)**: **This command defines how to handle the return from AT+COMMANDx, max return length is 100 bytes.

436

437

(% border="1" style="background-color:#f2f2f2; width:510px" %)

438

|(% style="width:510px" %)(((

439

**AT+DATACUTx=a,b,c**

440

441

* **a: length for the return of AT+COMMAND**

442

* **b:1: grab valid value by byte, max 6 bytes. 2: grab valid value by bytes section, max 3 sections.**

443

* **c: define the position for valid value. **

)))

**Examples:**

* (% style="color:#037691" %)**Grab bytes**

450

451

(% aria-label="image-20220602153621-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602153621-1.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

* (% style="color:#037691" %)**Grab a section**

456

457

(% aria-label="image-20220602153621-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602153621-2.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

* (% style="color:#037691" %)**Grab different sections**

462

463

(% aria-label="image-20220602153621-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602153621-3.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

)))

=== 3.3.5 Compose the uplink payload ===

(((

Through AT+COMMANDx and AT+DATACUTx we got valid value from each RS485 commands, Assume these valid value are RETURN1, RETURN2, .., to RETURNx. The next step is how to compose the LoRa Uplink Payload by these RETURNs. The command is **AT+DATAUP.**

)))

(((

(% style="color:#037691" %)**Examples: AT+DATAUP=0**

)))

(((

Compose the uplink payload with value returns in sequence and send with (% style="color:red" %)**A SIGNLE UPLINK**.

)))

(((

Final Payload is (% style="color:#4f81bd" %)**Battery Info+PAYVER + VALID Value from RETURN1 + Valid Value from RETURN2 + … + RETURNx**

)))

(((

Where PAYVER is defined by AT+PAYVER, below is an example screen shot.

493

)))

494

495

[[image:image-20220929111027-1.png||height="509" width="685"]](% title="Click and drag to resize" %)

496

497

498

(% style="color:#037691" %)**Examples: AT+DATAUP=1**

499

500

501

Compose the uplink payload with value returns in sequence and send with (% style="color:red" %)**Multiply UPLINKs**.

502

503

Final Payload is (% style="color:#4f81bd" %)**PAYVER + PAYLOAD COUNT + PAYLOAD# + DATA**

504

505

506

~1. PAYVER: Defined by AT+PAYVER

507

508

2. PAYLOAD COUNT: Total how many uplinks of this sampling.

509

510

3. PAYLOAD#: Number of this uplink. (from 0,1,2,3…,to PAYLOAD COUNT)

511

512

4. DATA: Valid value: max 8 bytes for each uplink so each uplink <= 11 bytes. For the last uplink, DATA will might less than 8 bytes

513

514

515

(% aria-label="image-20220602155039-4.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602155039-4.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

516

517

518

So totally there will be 3 uplinks for this sampling, each uplink include 8 bytes DATA

519

520

DATA1=RETURN1 Valid Value + the first two of Valid value of RETURN10= **20 20 0a 33 90 41 02 aa**

521

522

DATA2=3^^rd^^ ~~ 10^^th^^ byte of Valid value of RETURN10= **05 81 0a 20 20 20 20 2d**

523

524

DATA3=the rest of Valid value of RETURN10= **30**

525

526

527

(% style="color:red" %)**Notice: In firmware v1.3, the Max bytes has been changed according to the max bytes in different Frequency Bands for lowest SF. As below:**

528

529

530

~* For AU915/AS923 bands, if UplinkDwell time=0, max 51 bytes for each uplink.

531

532

* For AU915/AS923 bands, if UplinkDwell time=0, max 11 bytes for each uplink.

533

534

* For US915 band, max 11 bytes for each uplink.

535

536

~* For all other bands: max 51 bytes for each uplink.

537

538

539

(% style="color:red" %)** When AT+DATAUP=1, the maximum number of segments is 15, and the maximum total number of bytes is 1500;**

540

541

(% style="color:red" %)** When AT+DATAUP=1 and AT+ADR=0, the maximum number of bytes of each payload is determined by the DR value. (Since v1.4.0)**

542

543

544

Below are the uplink payloads:

545

546

(% aria-label="1654157178836-407.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654157178836-407.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

547

548

549

=== 3.3.6 Uplink on demand ===

550

551

552

Except uplink periodically, RS485-LN is able to uplink on demand. The server send downlink command to RS485-LN and RS485 will uplink data base on the command.

553

554

(% style="color:blue" %)**Downlink control command:**

555

556

(% style="color:#4472c4" %)** 0x08 command**(%%): Poll an uplink with current command set in RS485-LN.

557

558

(% style="color:#4472c4" %)** 0xA8 command**(%%): Send a command to RS485-LN and uplink the output from sensors.

559

560

561

=== 3.3.7 Uplink on Interrupt ===

562

563

564

RS485-LN support external Interrupt uplink since hardware v1.2 release.

565

566

(% aria-label="1654157342174-798.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654157342174-798.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]

567

568

569

==== 3.3.7.1 Set Interrupt Mode ====

570

571

572

Before using the interrupt function of the **INT** pin, users can set the interrupt triggering mode as required.

573

574

(% style="color:blue" %)**AT command:**

575

576

* (% style="color:#037691" %)**AT+INTMOD **(%%) ~/~/ Set the trigger interrupt mode

577

578

* (% style="color:#037691" %)**AT+INTMOD=0 **(%%) ~/~/ Disable Interrupt

579

580

* (% style="color:#037691" %)**AT+INTMOD=1 **(%%) ~/~/ Trigger by rising and falling edge

581

582

* (% style="color:#037691" %)**AT+INTMOD=2 **(%%) ~/~/ Trigger by falling edge **(default)**

583

584

* (% style="color:#037691" %)**AT+INTMOD=3 **(%%) ~/~/ Trigger by rising edge

585

586

(% style="color:blue" %)**Downlink Commands: **(% style="color:#037691" %)**0x06**

587

588

Format: Command Code (0x06) followed by 3 bytes.

589

590

Example1: Downlink Payload: **06 00 00 01 **~/~/ AT+INTMOD=1

591

592

Example2: Downlink Payload: **06 00 00 03 **~/~/AT+INTMOD=3

593

594

595

==== 3.3.7.2 Practical application ====

596

597

598

The following uses the default interrupt triggering mode (% style="color:blue" %)**(AT+INTMOD=2)**(%%) as an example to show the interrupt function of (% style="color:blue" %)**INT**(%%):

599

600

When a high voltage is given to the INT pin and then the level of the (% style="color:blue" %)**INT**(%%) pin changes from high to low, the interrupt is triggered by a falling edge and the RS485-LN sends an uplink data.

601

602

(% style="color:red" %)**Note: The level that triggers the interrupt ranges from 3.3V to 24V. Generally, it is recommended to use less than 12V.**

**Example:**

* Use a dry contact to connect the (% style="color:blue" %)**INT**(%%) pin and (% style="color:blue" %)**VIN+**(%%) pin of the RS485-LN.

607

608

When the dry contact is closed, INT and VIN+ conduct and INT is high.

609

610

Disconnecting the dry contact, the level of the INT pin changes from high to low, triggering an interrupt (triggered along the falling edge), and the RS485-LN sends an uplink data.

611

612

[[image:image-20240925174124-5.jpeg||height="439" width="703"]]

613

614

* Use a regulated power supply or a wet contact to connect the 485-LN to trigger the interruption.(This section uses a regulated power supply as an example.)

615

616

The positive pole of the stabilized power supply is connected to the (% style="color:blue" %)**INT**(%%) pin of RS485-LN, and the negative pole of the stabilized power supply is connected to the (% style="color:blue" %)**VIN-**(%%) pin of RS485-LN.

617

618

When the regulated power supply is operating, a high voltage is given to the INT pin and the INT level is high. When the regulated power supply is turned off, the level of the INT pin changes from

619

620

high to low, at which time an interrupt is triggered (triggered along the falling edge), and the device will send an uplink data.

621

622

[[image:image-20240925173243-4.jpeg||height="404" width="900"]]

623

624

* Example of interrupt data in TTN.

625

626

The first byte of the payload of the interrupted packet is (% style="color:blue" %)**0x81**(%%).

627

628

[[image:image-20240925181010-1.png||height="348" width="953"]]

629

630

631

== 3.4 Uplink Payload ==

632

633

634

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

635

|(% style="background-color:#4f81bd; color:white; width:70px" %)(((

636

**Size(bytes)**

637

)))|(% style="background-color:#4f81bd; color:white; width:80px" %)**1**|(% style="background-color:#4f81bd; color:white; width:360px" %)(((

638

**Length depends on the return from the commands**

639

)))

640

|(% style="width:90px" %)(((

641

Value

642

)))|(% style="width:114px" %)(((

643

PAYLOAD_VER

644

)))|(% style="width:353px" %)(((

645

If the valid payload is too long and exceed the maximum

646

647

support payload length in server, server will show payload not

648

649

provided in the LoRaWAN server.

650

)))

651

652

(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](%%)Below is the decoder for the first 3 bytes. The rest bytes are dynamic depends on different RS485 sensors.

653

654

655

== 3.5 Configure RS485-LN via AT or Downlink ==

(((

User can configure RS485-LN via AT Commands or LoRaWAN Downlink Commands

)))

(((

There are two kinds of Commands:

)))

* (((

(% style="color:#4f81bd" %)**Common Commands**(%%): They should be available for each sensor, such as: change uplink interval, reset device. For firmware v1.3, user can find what common commands it supports: [[AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

)))

* (((

(% style="color:#4f81bd" %)**Sensor Related Commands**(%%): These commands are special designed for RS485-LN. User can see these commands below:

)))

(((

)))

=== 3.5.1 Common Commands ===

680

681

682

They should be available for each of Dragino Sensors, such as: change uplink interval, reset device. For firmware v1.3, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

683

684

685

=== 3.5.2 Downlink Response(Since firmware v1.4) ===

686

687

688

Response feature is added to the server's downlink, a special package with a FPort of 200 will be uploaded immediately after receiving the data sent by the server.

689

690

691

(% aria-label="image-20220602163333-5.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602163333-5.png||data-widget="image" height="263" width="1160"]]

692

693

(% title="Click and drag to resize" %)

694

695

The first byte of this package represents whether the configuration is successful, 00 represents failure, 01 represents success. Except for the first byte, the other is the previous downlink. (All commands except A8 type commands are applicable)

696

697

698

=== 3.5.3 Sensor related commands ===

==== (% style="color:blue" %)**RS485 Debug Command**(%%) ====

(((

This command is used to configure the RS485 devices; they won't be used during sampling. Max Length of AT+CFGDEV is **40 bytes**.

)))

(((

* (% style="color:#037691" %)**AT Command**

711

712

(((

713

(% style="color:#4472c4" %)** AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,m** (%%) m: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command

)))

)))

(((

)))

* (((

(% style="color:#037691" %)**Downlink Payload**

)))

(((

Format: (% style="color:#4472c4" %)** A8 MM NN XX XX XX XX YY**

)))

(((

Where:

)))

* (((

MM: 1: add CRC-16/MODBUS ; 0: no CRC

735

)))

736

* (((

737

NN: The length of RS485 command

738

)))

739

* (((

740

XX XX XX XX: RS485 command total NN bytes

)))

* (((

(((

YY: How many bytes will be uplink from the return of this RS485 command,

)))

* (((

if YY=0, RS485-LN will execute the downlink command without uplink;

749

)))

750

* (((

751

if YY>0, RS485-LN will uplink total YY bytes from the output of this RS485 command; Fport=200

752

)))

753

* (((

754

if YY=FF, RS485-LN will uplink RS485 output with the downlink command content; Fport=200.

)))

)))

(((

(% style="color:blue" %)**Example 1:** (%%) ~-~-> Configure without ask for uplink (YY=0)

)))

(((

To connect a Modbus Alarm with below commands.

)))

* (((

The command to active alarm is: 0A 05 00 04 00 01 4C B0. Where 0A 05 00 04 00 01 is the Modbus command to read the register 00 40 where stored the DI status. The 4C B0 is the CRC-16/MODBUS which calculate manually.

)))

* (((

The command to deactivate alarm is: 0A 05 00 04 00 00 8D 70. Where 0A 05 00 04 00 00 is the Modbus command to read the register 00 40 where stored the DI status. The 8D 70 is the CRC-16/MODBUS which calculate manually.

)))

(((

So if user want to use downlink command to control to RS485 Alarm, he can use:

)))

(((

(% style="color:#4f81bd" %)**A8 01 06 0A 05 00 04 00 01 00**(%%): to activate the RS485 Alarm

)))

(((

(% style="color:#4f81bd" %)**A8 01 06 0A 05 00 04 00 00 00**(%%): to deactivate the RS485 Alarm

)))

(((

A8 is type code and 01 means add CRC-16/MODBUS at the end, the 3^^rd^^ byte is 06, means the next 6 bytes are the command to be sent to the RS485 network, the final byte 00 means this command don’t need to acquire output.

)))

(((

)))

(((

(% style="color:blue" %)**Example 2:** (%%)

)))

(((

Check TTL Sensor return:

)))

(((

(((

[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/test/WebHome/1654132684752-193.png?rev=1.1||alt="1654132684752-193.png"]](% title="Click and drag to resize" %)

)))

)))

==== (% style="color:blue" %)**Set Payload version**(%%) ====

(((

This is the first byte of the uplink payload. RS485-LN can connect to different sensors. User can set the PAYVER field to tell server how to decode the current payload.

)))

(((

* (% style="color:#037691" %)**AT Command:**

823

824

(% style="color:#4472c4" %)** AT+PAYVER: ** (%%) Set PAYVER field = 1

)))

* (((

(% style="color:#037691" %)**Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0xAE 01** (%%) ~-~-> Set PAYVER field = 0x01

)))

(((

(% style="color:#4472c4" %)** 0xAE 0F** (%%) ~-~-> Set PAYVER field = 0x0F

)))

**1 ) Add the interrupt flag at the highest bit of the Payver byte, that is, Byte7 of the first byte. (Since v1.4.0)**

843

844

845

[[image:image-20220824145428-2.png||height="168" width="1300"]]

846

847

848

**2 ) if the data intercepted by AT+DATACUT or AT+MBFUN is empty, it will display NULL, and the payload will be filled with n FFs.**

849

850

851

[[image:image-20220824145428-3.png||height="308" width="1200"]]

==== (% style="color:blue" %)**Set RS485 Sampling Commands**(%%) ====

(((

AT+COMMANDx or AT+DATACUTx

)))

(((

These three commands are used to configure how the RS485-LN polling data from Modbus device. Detail of usage please see : [[polling RS485 device>>||anchor="H3.3.3Configurereadcommandsforeachsampling"]].

)))

(((

)))

* (((

(% style="color:#037691" %)**AT Command:**

872

)))

873

874

(% style="color:#4472c4" %)** AT+COMMANDx: ** (%%) Configure RS485 read command to sensor.

875

876

(% style="color:#4472c4" %)** AT+DATACUTx: **(%%) Configure how to handle return from RS485 devices.

* (((

(% style="color:#037691" %)**Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0xAF**(%%) downlink command can be used to set AT+COMMANDx or AT+DATACUTx.

)))

(((

(% style="color:red" %)**Note : if user use AT+COMMANDx to add a new command, he also need to send AT+DATACUTx downlink.**

)))

(((

Format: (% style="color:#4472c4" %)** AF MM NN LL XX XX XX XX YY**

)))

(((

Where:

)))

* (((

MM: the ATCOMMAND or AT+DATACUT to be set. Value from 01 ~~ 0F,

905

)))

906

* (((

907

NN: 0: no CRC; 1: add CRC-16/MODBUS ; 2: set the AT+DATACUT value.

908

)))

909

* (((

910

LL: The length of AT+COMMAND or AT+DATACUT command

911

)))

912

* (((

913

XX XX XX XX: AT+COMMAND or AT+DATACUT command

914

)))

915

* (((

916

YY: If YY=0, RS485-LN will execute the downlink command without uplink; if YY=1, RS485-LN will execute an uplink after got this command.

)))

(((

**Example:**

)))

(((

(% style="color:#037691" %)**AF 03 01 06 0A 05 00 04 00 01 00**(%%): Same as AT+COMMAND3=0A 05 00 04 00 01,1

)))

(((

(% style="color:#037691" %)**AF 03 02 06**(% style="color:orange" %)** 10 **(% style="color:red" %)**01 **(% style="color:green" %)**05 06 09 0A**(% style="color:#037691" %)** 00**(%%): Same as AT+DATACUT3=(% style="color:orange" %)**16**(%%),(% style="color:red" %)**1**(%%),(% style="color:green" %)**5+6+9+10**

)))

(((

(% style="color:#037691" %)**AF 03 02 06 **(% style="color:orange" %)**0B**(% style="color:red" %)** 02 **(% style="color:green" %)**05 07 08 0A **(% style="color:#037691" %)**00**(%%): Same as AT+DATACUT3=(% style="color:orange" %)**11**(%%),(% style="color:red" %)**2**(%%),(% style="color:green" %)**5~~7+8~~10**

)))

==== (% style="color:blue" %)**Fast command to handle MODBUS device**(%%) ====

(((

(% style="color:#4472c4" %)** AT+MBFUN**(%%) is valid since v1.3 firmware version. The command is for fast configure to read Modbus devices. It is only valid for the devices which follow the [[MODBUS-RTU protocol>>url:https://www.modbustools.com/modbus.html]].

)))

(((

This command is valid since v1.3 firmware version

)))

(((

AT+MBFUN can auto read the Modbus function code: 01, 02, 03 or 04. AT+MBFUN has lower priority vs AT+DATACUT command. If AT+DATACUT command is configured, AT+MBFUN will be ignore.

)))

(((

)))

(((

**Example:**

)))

* (((

AT+MBFUN=1 and AT+DATACUT1/AT+DATACUT2 are not configure (0,0,0). So RS485-LN.

964

)))

965

* (((

966

AT+COMMAND1= 01 03 00 10 00 08,1 ~-~-> read slave address 01 , function code 03, start address 00 01, quantity of registers 00 08.

967

)))

968

* (((

969

AT+COMMAND2= 01 02 00 40 00 10,1 ~-~-> read slave address 01 , function code 02, start address 00 40, quantity of inputs 00 10.

)))

(% aria-label="image-20220602165351-6.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602165351-6.png||data-widget="image"]]

975

976

(% title="Click and drag to resize" %)

977

978

(% aria-label="image-20220602165351-7.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602165351-7.png||data-widget="image"]](% title="Click and drag to resize" %)

979

980

* (((

981

(% style="color:#037691" %)**Downlink Command:**

982

)))

983

984

**~ (% style="color:#4472c4" %)A9 aa(%%)** ~-~-> Same as AT+MBFUN=aa

985

986

987

==== (% style="color:blue" %)**RS485 command timeout**(%%) ====

(((

Some Modbus device has slow action to send replies. This command is used to configure the RS485-LN to use longer time to wait for their action.

)))

(((

Default value: 0, range: 0 ~~ 65 seconds

)))

(((

* (% style="color:#037691" %)** AT Command:**

1000

1001

(% style="color:#4472c4" %)** AT+CMDDLaa=hex(bb cc)*1000**

)))

(((

**Example:**

)))

(((

(% style="color:#4472c4" %)** AT+CMDDL1=1000** (%%)to send the open time to 1000ms

)))

(((

)))

* (((

(% style="color:#037691" %)** Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0x AA aa bb cc**(%%) Same as: AT+CMDDLaa=hex (bb cc)

)))

(((

**Example:**

)))

(((

**0xAA 01 03 E8** ~-~-> Same as **AT+CMDDL1=1000 ms**

)))

==== (% style="color:blue" %)**Uplink payload mode**(%%) ====

(((

Define to use one uplink or multiple uplinks for the sampling.

)))

(((

The use of this command please see: [[Compose Uplink payload>>||anchor="H3.3.4Composetheuplinkpayload"]]

)))

(((

* (% style="color:#037691" %)** AT Command:**

1053

1054

(% style="color:#4472c4" %)** AT+DATAUP=0**

1055

1056

(% style="color:#4472c4" %)** AT+DATAUP=1**

)))

(% style="color:#4472c4" %)** 0xAD 01 00 00 14** (%%) **~-~->** Same as AT+DATAUP=1，20000 ~/~/ (00 00 14 is 20 seconds)

1062

1063

Each uplink is sent to the server at 20-second intervals when segmented.

* (((

(% style="color:#037691" %)** Downlink Payload:**

1068

)))

1069

1070

(% style="color:#4472c4" %)** 0xAD 00** (%%) **~-~->** Same as AT+DATAUP=0

1071

1072

(% style="color:#4472c4" %)** 0xAD 01** (%%) **~-~->** Same as AT+DATAUP=1 ~/~/Each uplink is sent to the server one after the other as it is segmented.

1073

1074

1075

(Since firmware v1.4.0)

1076

1077

* (((

1078

(% style="color:#037691" %)** AT Command:**

1079

)))

1080

1081

(% style="color:#4472c4" %)** AT+DATAUP=1,Timeout**

* (((

(% style="color:#037691" %)** Downlink Payload:**

1086

)))

1087

1088

(% style="color:#4472c4" %)** 0xAD 01 00 00 14** (%%) **~-~->** Same as AT+DATAUP=1，20000 ~/~/ (00 00 14 is 20 seconds)

1089

1090

Each uplink is sent to the server at 20-second intervals when segmented.

1091

1092

1093

==== (% style="color:blue" %)**Cut data separation processing(Since Version 1.4.2)**(%%) ====

1094

1095

1096

AT+NEWLINE command, which only takes effect when AT+DATAUP=1 or AT+DATAUP=1, timeout.

1097

1098

When not set, each part of AT+DATAUP is sent according to the maximum number of bytes of DR.

1099

1100

When setting, each part of AT+DATAUP is sent according to the value set by AT+NEWLINE.

* (((

(% style="color:#037691" %)** AT Command:**

1105

)))

1106

1107

(% style="color:#4472c4" %)//**AT+NEWLINE=ALL**//(%%)// //The data cut out by each AT+COMMANDx command is sent separately as an uplink.

1108

1109

(% style="color:#4472c4" %)//**AT+NEWLINE=ALL**//(%%)// equal： (% style="color:#4472c4" %)**AT+NEWLINE=1+2+3+4+5+6+7+8+9+10+11+12+13+14+15**//

1110

1111

1112

(% style="color:#4472c4" %)//**AT+NEWLINE=a+b+c**//(%%)// //The data returned by all commands is divided into three parts, COMMAND(1~~a) is the first part, COMMAND(a+1~~b) is the second part,COMMAND(b+1~~c) is the third part.

1113

1114

1115

(% style="color:#4472c4" %)//**AT+NEWLINE=NULL**//(%%)// //Turn off the functionality of this AT command.

* (((

(% style="color:#037691" %)** Downlink Payload:**

1120

)))

1121

1122

//AT+NEWLINE=ALL ~-~--> (% style="color:#4472c4" %)**0xAC 01**//

1123

1124

// AT+NEWLINE= NULL ~-~--> (% style="color:#4472c4" %)**0xAC 00**//

1125

1126

//AT+NEWLINE= a+b+c ~-~--> (% style="color:#4472c4" %)**0xAC number of bytes a b c**//

1127

1128

//AT+NEWLINE= 1+5+15 ~-~--> (% style="color:#4472c4" %)**0xAC 03 01 05 0F**//

1129

1130

1131

==== (% style="color:blue" %)**Manually trigger an Uplink**(%%) ====

(((

Ask device to send an uplink immediately.

)))

* (((

(% style="color:#037691" %)** AT Command:**

)))

(((

No AT Command for this, user can press the [[ACT button>>||anchor="H3.7Buttons"]] for 1 second for the same.

)))

(((

)))

* (((

(% style="color:#037691" %)** Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0x08 FF**(%%), RS485-LN will immediately send an uplink.

)))

==== (% style="color:blue" %)**Clear RS485 Command**(%%) ====

(((

The AT+COMMANDx and AT+DATACUTx settings are stored in special location, user can use below command to clear them.

)))

* (((

(% style="color:#037691" %)** AT Command:**

)))

(((

(% style="color:#4472c4" %)** AT+CMDEAR=mm,nn** (%%) mm: start position of erase ,nn: stop position of erase

)))

(((

Etc. AT+CMDEAR=1,10 means erase AT+COMMAND1/AT+DATACUT1 to AT+COMMAND10/AT+DATACUT10

)))

(((

Example screen shot after clear all RS485 commands.

)))

(((

)))

(((

The uplink screen shot is:

1193

)))

1194

1195

(% aria-label="1654160691922-496.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654160691922-496.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

* (((

(% style="color:#037691" %)** Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** 0x09 aa bb** (%%) same as AT+CMDEAR=aa,bb

)))

==== (% style="color:blue" %)**Set Serial Communication Parameters**(%%) ====

(((

Set the Rs485 serial communication parameters:

)))

(((

(% style="color:#037691" %)**AT Command:**

)))

(((

* Set Baud Rate

)))

(% style="color:#4472c4" %)** AT+BAUDR=9600** (%%) ~/~/ Options: (200~~115200) When using low baud rate or receiving multiple bytes, you need to use AT+CMDDL to increase the receive timeout (the default receive timeout is 400ms), otherwise data will be lost

(((

* Set UART Parity

)))

(% style="color:#4472c4" %)** AT+PARITY=0** (%%) ~/~/ Option: 0: no parity, 1: odd parity, 2: even parity

(((

* Set STOPBIT

)))

(% style="color:#4472c4" %)** AT+STOPBIT=0** (%%) ~/~/ Option: 0 for 1bit; 1 for 1.5 bit ; 2 for 2 bits

(((

(% style="color:#037691" %)**Downlink Payload:**

)))

(((

(% style="color:#4472c4" %)** A7 01 aa bb**: (%%) Same AT+BAUDR=hex(aa bb)*100

)))

(((

**Example:**

)))

* (((

A7 01 00 60 same as AT+BAUDR=9600

1254

)))

1255

* (((

1256

A7 01 04 80 same as AT+BAUDR=115200

)))

(((

* A7 02 aa: Same as AT+PARITY=aa (aa value: 00 , 01 or 02)

)))

(((

* A7 03 aa: Same as AT+STOPBIT=aa (aa value: 00 , 01 or 02)

)))

==== (% style="color:blue" %)**Configure Databit (Since Version 1.4.0)**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1275

)))

1276

1277

(% style="color:#4472c4" %)** AT+DATABIT=7 **(%%)~/~/ Set the data bits to 7

1278

1279

(% style="color:#4472c4" %)** AT+DATABIT=8 **(%%)~/~/ Set the data bits to 8

1280

1281

* (((

1282

(% style="color:#037691" %)**Downlink Payload:**

1283

)))

1284

1285

(% style="color:#4472c4" %)** A7 04 07**(%%): Same as AT+DATABIT=7

1286

1287

(% style="color:#4472c4" %)** A7 04 08**(%%): Same as AT+DATABIT=8

==== (% style="color:blue" %)**Encrypted payload(Since Version 1.4.0)**(%%) ====

(((

)))

* (((

(% style="color:#037691" %)** AT Command:**

1299

)))

1300

1301

(% style="color:#4472c4" %)** AT+DECRYPT=1 ** (%%) ~/~/ The payload is uploaded without encryption

1302

1303

(% style="color:#4472c4" %)** AT+DECRYPT=0 ** (%%) ~/~/ Encrypt when uploading payload (default)

==== (% style="color:blue" %)**Get sensor value(Since Version 1.4.0)**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1312

)))

1313

1314

(% style="color:#4472c4" %)** AT+GETSENSORVALUE=0 **(%%) ~/~/ The serial port gets the reading of the current sensor

1315

1316

(% style="color:#4472c4" %)** AT+GETSENSORVALUE=1 **(%%) ~/~/ The serial port gets the current sensor reading and uploads it.

==== (% style="color:blue" %)**Resets the downlink packet count(Since Version 1.4.0)**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1325

)))

1326

1327

(% style="color:#4472c4" %)** AT+DISFCNTCHECK=0 **(%%) ~/~/ When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node will no longer receive downlink packets (default)

1328

1329

(% style="color:#4472c4" %)** AT+DISFCNTCHECK=1 **(%%) ~/~/ When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node resets the downlink packet count and keeps it consistent with the server downlink packet count.

==== (% style="color:blue" %)**When the limit bytes are exceeded, upload in batches(Since Version 1.4.0)**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1338

)))

1339

1340

(% style="color:#4472c4" %)** AT+DISMACANS=0** (%%) ~/~/ When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of 11 bytes (DR0 of US915, DR2 of AS923, DR2 of AU195), the node will send a packet with a payload of 00 and a port of 4. (default)

1341

1342

(% style="color:#4472c4" %)** AT+DISMACANS=1** (%%) ~/~/ When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of the DR, the node will ignore the MACANS and not reply, and only upload the payload part.

* (((

(% style="color:#037691" %)** Downlink Payload:**

1347

)))

1348

1349

(% style="color:#4472c4" %)** 0x21 00 01 ** (%%) ~/~/ Set the DISMACANS=1

==== (% style="color:blue" %)**Copy downlink to uplink (Since Version 1.4.0)**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1358

)))

1359

1360

(% style="color:#4472c4" %)** AT+RPL=5** (%%) ~/~/ After receiving the package from the server, it will immediately upload the content of the package to the server, the port number is 100.

1361

1362

Example：**aa xx xx xx xx** ~/~/ aa indicates whether the configuration has changed, 00 is yes, 01 is no; xx xx xx xx are the bytes sent.

1363

1364

1365

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173747-6.png?width=1124&height=165&rev=1.1||alt="image-20220823173747-6.png"]]

1366

1367

For example, sending 11 22 33 44 55 66 77 will return invalid configuration 00 11 22 33 44 55 66 77.

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173833-7.png?width=1124&height=149&rev=1.1||alt="image-20220823173833-7.png"]]

1372

1373

For example, if 01 00 02 58 is issued, a valid configuration of 01 01 00 02 58 will be returned.

==== (% style="color:blue" %)**Query version number and frequency band 、TDC(Since Version 1.4.0)**(%%) ====

(((

* (% style="color:#037691" %)**Downlink Payload:**

1382

1383

(% style="color:#4472c4" %)** 26 01 ** (%%) ~/~/ Downlink 26 01 can query device upload frequency, frequency band, software version number, TDC time.

)))

Example：

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173929-8.png?width=1205&height=76&rev=1.1||alt="image-20220823173929-8.png"]]

==== (% style="color:blue" %)** Monitor RS485 communication of other devices(Since Version 1.4.0)**(%%) ====

* (((

(% style="color:#037691" %)** AT Command:**

1398

)))

1399

1400

(% style="color:#4472c4" %)**AT+RXMODE=1,10** (%%) ~/~/ When the RS485-LN receives more than 10 bytes from the RS485, it immediately sends the uplink of the received data.

1401

1402

(% style="color:#4472c4" %)**AT+RXMODE=2,500 ** (%%) ~/~/ RS485-LN uploads data as uplink from the first byte received by RS485 to the data received within 500ms after that.

1403

1404

(% style="color:#4472c4" %)**AT+RXMODE=0,0 ** (%%) ~/~/ Disable this mode (default)

* (((

(% style="color:#037691" %)**Downlink Payload:**

1409

)))

1410

1411

(% style="color:#4472c4" %)** A6 aa bb bb ** (%%) ~/~/ same as AT+RXMODE=aa,bb

1412

1413

[[image:image-20220824144240-1.png]]

1414

1415

1416

== 3.6 Listening mode for RS485 network ==

(((

This feature support since firmware v1.4

)))

(((

RS485-LN supports listening mode, it can listen the RS485 network packets and send them via LoRaWAN uplink. Below is the structure. The blue arrow shows the RS485 network packets to RS485-LN.

1425

1426

[[image:image-20240928104143-6.png||height="487" width="797"]]

1427

)))

1428

1429

(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]

1430

1431

(% title="Click and drag to resize" %)

1432

1433

(((

1434

To enable the listening mode, use can run the command (% style="color:#4472c4" %)** AT+RXMODE**.

1435

)))

1436

1437

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)

1438

|=(% style="width: 156px; background-color:#4F81BD;color:white" %)(((

1439

**Command example**

1440

)))|=(% style="width: 355px; background-color:#4F81BD;color:white" %)(((

1441

**Function**

1442

)))

1443

|(% style="width:156px" %)(((

1444

AT+RXMODE=1,10

1445

)))|(% style="width:352px" %)(((

1446

Enable listening mode 1, if RS485-LN has received more than 10 RS485 commands from the network. RS485-LN will send these commands via LoRaWAN uplinks.

1447

)))

1448

|(% style="width:156px" %)(((

1449

AT+RXMODE=2,500

1450

)))|(% style="width:352px" %)(((

1451

Enable listening mode 2, RS485-LN will capture and send a 500ms content once from the first detect of character. Max value is 65535 ms

1452

)))

1453

|(% style="width:156px" %)(((

1454

AT+RXMODE=0,0

1455

)))|(% style="width:352px" %)(((

1456

Disable listening mode. This is the default settings.

1457

)))

1458

|(% style="width:156px" %)(((

1459

1460

)))|(% style="width:352px" %)(((

1461

A6 aa bb cc same as AT+RXMODE=aa,(bb<<8 | cc)

)))

(((

(% style="color:#037691" %)**Downlink Command:**

)))

(((

(% style="color:#4472c4" %)** 0xA6 aa bb cc **(%%) same as AT+RXMODE=aa,(bb<<8 | cc)

)))

(((

)))

(((

**Example**:

)))

(((

The RS485-LN is set to AT+RXMODE=2,1000

)))

(((

There is a two Modbus commands in the RS485 network as below:

)))

(((

The Modbus master send a command: (% style="background-color:#ffc000" %)**01 03 00 00 00 02 c4 0b**

)))

(((

And Modbus slave reply with: (% style="background-color:green" %)**01 03 04 00 00 00 00 fa 33**

)))

(((

RS485-LN will capture both and send the uplink: (% style="background-color:#ffc000" %)**01 03 00 00 00 02 c4 0b **(% style="background-color:green" %)**01 03 04 00 00 00 00 fa 33**

)))

(((

(% aria-label="image-20220602171200-9.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602171200-9.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

)))

(((

(% style="color:red" %)**Notice: Listening mode can work with the default polling mode of RS485-LN. When RS485-LN is in to send the RS485 commands (from AT+COMMANDx), the listening mode will be interrupt for a while.**

)))

== 3.7 Buttons ==

(% border="1.5" cellspacing="4" style="background-color:#f2f2f2; width:430px" %)

1518

|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**Button**|=(% style="width: 380px;background-color:#4F81BD;color:white" %)**Feature**

1519

|(% style="width:50px" %)ACT|(% style="width:361px" %)If RS485 joined in network, press this button for more than 1 second, RS485 will upload a packet, and the SYS LED will give a (% style="color:blue" %)**Blue blink**

1520

|(% style="width:50px" %)RST|(% style="width:361px" %)Reboot RS485

1521

|(% style="width:50px" %)PRO|(% style="width:361px" %)Use for upload image, see [[How to Update Image>>||anchor="H6.1Howtoupgradetheimage3F"]]

== 3.8 LEDs ==

(% border="1.5" cellspacing="4" style="background-color:#f2f2f2; width:430px" %)

1527

|=(% style="width: 50px;background-color:#4F81BD;color:white" %)**LEDs**|=(% style="width: 380px;background-color:#4F81BD;color:white" %)**Feature**

1528

|PWR|Always on if there is power

1529

|SYS|After device is powered on, the SYS will (% style="color:green" %)**fast blink in GREEN**(%%) for 5 times, means RS485-LN start to join LoRaWAN network. If join success, SYS will be (% style="color:green" %)**on GREEN for 5 seconds** (%%)**. **SYS will (% style="color:green" %)**blink Blue**(%%) on every upload and (% style="color:green" %)**blink Green**(%%) once receive a downlink message.

= 4. Case Study =

User can check this URL for some case studies: [[APP RS485 COMMUNICATE WITH SENSORS>>doc:Main.Application Note \: Communicate with Different Sensors ----- RS485-LN RS485-BL.WebHome]]

1535

1536

1537

= 5. Use AT Command =

1538

1539

== 5.1 Access AT Command ==

(((

RS485-LN supports AT Command set. User can use a USB to TTL adapter plus the 3.5mm Program Cable to connect to RS485-LN to use AT command, as below.

1544

)))

1545

1546

(% aria-label="1654162355560-817.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162355560-817.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

In PC, User needs to set (% style="color:blue" %)**serial tool**(%%)(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console of RS485-LN. The default password is 123456. Below is the output for reference:

1551

)))

1552

1553

(% aria-label="1654162368066-342.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162368066-342.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

(((

More detail AT Command manual can be found at [[AT Command Manual>>https://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/]]

)))

== 5.2 Common AT Command Sequence ==

1562

1563

=== 5.2.1 Multi-channel ABP mode (Use with SX1301/LG308) ===

1564

1565

1566

If device has not joined network yet:

1567

1568

* (% style="color:#037691" %)**AT+FDR**

1569

* (% style="color:#037691" %)**AT+NJM=0**

1570

* (% style="color:#037691" %)**ATZ**

(((

If device already joined network:

1576

1577

* (% style="color:#037691" %)**AT+NJM=0**

1578

* (% style="color:#037691" %)**ATZ**

)))

=== 5.5.2 Single-channel ABP mode (Use with LG01/LG02) ===

1584

1585

1586

(% style="background-color:#dcdcdc" %)**AT+FDR** (%%) Reset Parameters to Factory Default, Keys Reserve

1587

1588

(% style="background-color:#dcdcdc" %)**AT+NJM=0 **(%%) Set to ABP mode

1589

1590

(% style="background-color:#dcdcdc" %)**AT+ADR=0** (%%) Set the Adaptive Data Rate Off

1591

1592

(% style="background-color:#dcdcdc" %)**AT+DR=5** (%%) Set Data Rate

1593

1594

(% style="background-color:#dcdcdc" %)**AT+TDC=60000** (%%) Set transmit interval to 60 seconds

1595

1596

(% style="background-color:#dcdcdc" %)**AT+CHS=868400000**(%%) Set transmit frequency to 868.4Mhz

1597

1598

(% style="background-color:#dcdcdc" %)**AT+RX2FQ=868400000** (%%) Set RX2Frequency to 868.4Mhz (according to the result from server)

1599

1600

(% style="background-color:#dcdcdc" %)**AT+RX2DR=5** (%%) Set RX2DR to match the downlink DR from server. see below

1601

1602

(% style="background-color:#dcdcdc" %)**AT+DADDR=26** (%%) 01 1A F1 Set Device Address to 26 01 1A F1, this ID can be found in the LoRa Server portal.

1603

1604

(% style="background-color:#dcdcdc" %)**ATZ** (%%) Reset MCU

1605

1606

1607

(% style="color:red" %)**Note:**

1608

1609

(((

1610

(% style="color:red" %)1. Make sure the device is set to ABP mode in the IoT Server.

1611

2. Make sure the LG01/02 gateway RX frequency is exactly the same as AT+CHS setting.

1612

3. Make sure SF / bandwidth setting in LG01/LG02 match the settings of AT+DR. refer [[this link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/&file=LoRaWAN%201.0.3%20Regional%20Parameters.xlsx]] to see what DR means.

1613

4. The command AT+RX2FQ and AT+RX2DR is to let downlink work. to set the correct parameters, user can check the actually downlink parameters to be used. As below. Which shows the RX2FQ should use 868400000 and RX2DR should be 5

)))

(% aria-label="1654162478620-421.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162478620-421.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

= 6. FAQ =

== 6.1 How to upgrade the image? ==

(((

The RS485-LN LoRaWAN Controller is shipped with a 3.5mm cable, the cable is used to upload image to RS485-LN to:

)))

* (((

Support new features

)))

* (((

For bug fix

)))

* (((

Change LoRaWAN bands.

)))

(((

Below shows the hardware connection for how to upload an image to RS485-LN:

1642

)))

1643

1644

(% aria-label="1654162535040-878.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162535040-878.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]

1645

1646

(% title="Click and drag to resize" %)

1647

1648

(((

1649

(% style="color:blue" %)**Step1**(%%)**:** Download [[flash loader>>url:https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/flasher-stm32.html]].

)))

(((

(% style="color:blue" %)**Step2**(%%)**:** Download the [[LT Image files>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AACP33wo_ZQLsxW2MJ70oUoba/RS485-LN/Firmware?dl=0&subfolder_nav_tracking=1]].

)))

(((

(% style="color:blue" %)**Step3**(%%)**: **Open flashloader; choose the correct COM port to update.

)))

(((

(((

(((

(% style="color:blue" %) Hold down the PRO button and then momentarily press the RST reset button and the SYS led will change from OFF to ON, While SYS LED is RED ON, it means the RS485-LN is ready to be program.

)))

)))

)))

(% aria-label="image-20220602175818-12.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175818-12.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

1676

1677

1678

(% aria-label="image-20220602175848-13.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175848-13.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

1679

1680

1681

(% aria-label="image-20220602175912-14.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175912-14.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

1682

1683

1684

(% style="color:red" %)**Users can select the new burning software STM32Cubeprogramer for firmware upgrade and follow the same connection steps to enter burning mode (until SYS LED is RED ON):**

1685

1686

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H4.2.FirmwareupgradeusingSTM32Cubeprogramer>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H4.2.FirmwareupgradeusingSTM32Cubeprogramer]]

1687

1688

1689

(% style="color:red" %)**Notice**: **In case user has lost the program cable. User can hand made one from a 3.5mm cable. The pin mapping is:**

1690

1691

(% aria-label="image-20220602175638-10.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175638-10.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)

1692

1693

1694

== 6.2 How to change the LoRa Frequency Bands/Region? ==

1695

1696

1697

User can follow the introduction for [[how to upgrade image>>||anchor="H6.1Howtoupgradetheimage3F"]]. When download the images, choose the required image file for download.

1698

1699

1700

== 6.3 How many RS485-Slave can RS485-LN connects? ==

1701

1702

1703

The RS485-LN can support max 32 RS485 devices. Each uplink command of RS485-LN can support max 16 different RS485 command. So RS485-LN can support max 16 RS485 devices pre-program in the device for uplink. For other devices no pre-program, user can use the [[downlink message (type code 0xA8) to poll their info>>||anchor="H3.3.3Configurereadcommandsforeachsampling"]].

1704

1705

1706

== 6.4 Compatible question to ChirpStack and TTI LoRaWAN server ? ==

1707

1708

1709

When user need to use with ChirpStack or TTI. Please set AT+RPL=4.

1710

1711

Detail info check this link: [[Set Packet Receiving Response Level>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H7.23SetPacketReceivingResponseLevel"]]

1712

1713

1714

== 6.5 Can i use point to point communication for RS485-LN? ==

1715

1716

1717

Yes, please updating point-to-point [[firmware>>https://www.dropbox.com/sh/g99v0fxcltn9r1y/AACP33wo_ZQLsxW2MJ70oUoba/RS485-LN/Firmware?dl=0&subfolder_nav_tracking=1]]，then refer [[Point to Point Communication for RS485-LN>>Point to Point Communication for RS485-LN]].

1718

1719

1720

== 6.6 How to Use RS485-LN to connect to RS232 devices? ==

1721

1722

1723

[[Use RS485-BL or RS485-LN to connect to RS232 devices. - DRAGINO>>url:http://8.211.40.43:8080/xwiki/bin/view/Main/RS485%20to%20RS232/]]

1724

1725

1726

== 6.7 How to judge whether there is a problem with the set COMMAND ==

1727

1728

=== 6.7.1 Introduce: ===

1729

1730

1731

Users can use below the structure to fast debug the communication between RS485BL and RS485-LN. The principle is to put the PC in the RS485 network and sniff the packet between Modbus MTU and RS485-BL/LN. We can use this way to:

1732

1733

1. Test if Modbus-MTU works with PC commands.

1734

1. Check if RS485-LN sent the expected command to Mobus-MTU

1735

1. Check if Modbus-MTU return back the expected result to RS485-LN.

1736

1. If both b) and c) has issue, we can compare PC’s output and RS485-LN output.

1737

1738

[[image:image-20240816112950-1.png||height="382" width="731"]]

Example Connection:

[[image:image-20221130104310-2.png]]

1744

1745

1746

=== 6.7.2 Set up PC to monitor RS485 network With Serial tool ===

1747

1748

1749

(% style="color:red" %)**Note: Receive and send set to hex mode**

1750

1751

[[image:image-20221130104310-3.png||height="616" width="714"]]

1752

1753

1754

=== 6.7.3 With ModRSsim2: ===

1755

1756

1757

(% style="color:blue" %)**(1) Select serial port MODBUS RS-232**

1758

1759

[[image:image-20221130104310-4.png||height="390" width="865"]]

1760

1761

1762

(% style="color:blue" %)**(2) Click the serial port icon**

1763

1764

[[image:image-20221130104310-5.png||height="392" width="870"]]

1765

1766

1767

(% style="color:blue" %)**(3) After selecting the correct serial port and baud rate, click ok**

1768

1769

[[image:image-20221130104310-6.png]]

1770

1771

1772

(% style="color:blue" %)**(4) Click the comms.**

1773

1774

[[image:image-20221130104310-7.png||height="376" width="835"]]

1775

1776

(% class="wikigeneratedid" id="HRunRS485-LN2FBLcommandandmonitorifitiscorrect." %)

1777

**Run RS485-LN/BL command and monitor if it is correct.**

1778

1779

1780

=== 6.7.4 Example – Test the CFGDEV command ===

1781

1782

1783

RS485-LN sent below command:

1784

1785

(% style="color:blue" %)**AT+CFGDEV=01 03 00 20 00 01,1**(%%) to RS485 network, and PC is able to get this command and return commands from MTU to show in the serial tool.

1786

1787

1788

We can see the output from the Serial port tool to analyze. And check if they are expected result.

1789

1790

[[image:image-20221130104310-8.png||height="214" width="797"]]

1791

1792

1793

We can also use (% style="color:blue" %)**ModRSsim2**(%%) to see the output.

1794

1795

[[image:image-20221130104310-9.png||height="531" width="729"]]

1796

1797

1798

=== 6.7.5 Example – Test CMD command sets. ===

1799

1800

1801

Run (% style="color:blue" %)**AT+SENSORVALUE=1**(%%) to test the CMD commands set in RS485-LN.

1802

1803

1804

(% style="color:blue" %)**Serial port tool:**

1805

1806

[[image:image-20221130104310-10.png||height="339" width="844"]]

1807

1808

1809

(% style="color:blue" %)**ModRSsim2:**

1810

1811

[[image:image-20221130104310-11.png||height="281" width="962"]]

1812

1813

1814

=== 6.7.6 Test with PC ===

1815

1816

1817

If there is still have problem to set up correctly the commands between RS485-LN and MTU. User can test the correct RS485 command set in PC and compare with the RS485 command sent out via RS485-LN. as long as both commands are the same, the MTU should return correct result.

1818

1819

1820

Or User can send the working commands set in PC serial tool to Dragino Support to check what should be configured in RS485-LN.

1821

1822

(% style="color:blue" %)**Connection method：**

1823

1824

[[image:image-20221130104310-12.png]]

1825

1826

1827

(% style="color:blue" %)**Link situation:**

1828

1829

[[image:image-20221130104310-13.png||height="458" width="486"]]

1830

1831

1832

[[image:image-20221130104310-14.png||height="371" width="823"]]

1833

1834

1835

== 6.8 Where to get the decoder for RS485-LN? ==

1836

1837

1838

The decoder for RS485-LN needs to be written by yourself. Because the sensor to which the user is connected is custom, the read device data bytes also need custom parsing, so there is no universal decoder. We can only provide [[templates>>https://github.com/dragino/dragino-end-node-decoder/tree/main/RS485-LN]] for decoders (no intermediate data parsing part involved)

1839

1840

1841

== 6.9 How to configure RS485 commands more conveniently？ ==

1842

1843

1844

Dragino has developed an application for the RS485 series of products.

1845

1846

It can help you configure RS485 sensors more conveniently

1847

Please refer to the link below for specific usage：

1848

1849

[[RS485 Configure Tool - DRAGINO>>url:http://wiki.dragino.com/xwiki/bin/view/Main/RS485_Configure_Tool/#HTableofContentsFF1A]]

1850

1851

1852

= 7. Trouble Shooting =

1853

1854

== 7.1 Downlink doesn't work, how to solve it? ==

1855

1856

1857

Please see this link for debug: [[LoRaWAN Communication Debug>>doc:Main.LoRaWAN Communication Debug.WebHome]]

1858

1859

1860

== 7.2 Why customers can't join TTN V3 in US915 /AU915 bands? ==

1861

1862

1863

It might about the channels mapping. Please see for detail: [[Notice of Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]

1864

1865

1866

== 7.3 Why can't customers see the device's data in the server when the data is too long? ==

1867

1868

1869

This is due to the limitation of the lorawan protocol, and the fixed DR needs to be adjusted to improve this problem.

1870

1871

Please refer to the following link for the number of bytes limited by different frequencies and different DRs in the lorawan protocol

1872

1873

[[lora-alliance.org/wp-content/uploads/2021/05/RP002-1.0.3-FINAL-1.pdf>>url:https://lora-alliance.org/wp-content/uploads/2021/05/RP002-1.0.3-FINAL-1.pdf]]

Example:

[[image:image-20240620145456-1.png]]

1878

1879

Please refer to the following command to fix DR

AT+ADR=0

AT+DR=3

Downlink command:

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H7.4DataRate>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H7.4DataRate]]

= 8. Order Info =

(% style="color:blue" %)**Part Number: RS485-LN-XXX**

1894

1895

(% style="color:blue" %)**XXX:**

1896

1897

* (% style="color:red" %)**EU433**(%%): frequency bands EU433

1898

* (% style="color:red" %)**EU868**(%%): frequency bands EU868

1899

* (% style="color:red" %)**KR920**(%%): frequency bands KR920

1900

* (% style="color:red" %)**CN470**(%%): frequency bands CN470

1901

* (% style="color:red" %)**AS923**(%%): frequency bands AS923

1902

* (% style="color:red" %)**AU915**(%%): frequency bands AU915

1903

* (% style="color:red" %)**US915**(%%): frequency bands US915

1904

* (% style="color:red" %)**IN865**(%%): frequency bands IN865

1905

* (% style="color:red" %)**RU864**(%%): frequency bands RU864

1906

* (% style="color:red" %)**KZ865**(%%): frequency bands KZ865

= 9. Packing Info =

**Package Includes**:

1912

1913

* RS485-LN x 1

1914

* Stick Antenna for LoRa RF part x 1

1915

* Program cable x 1

1916

1917

**Dimension and weight**:

1918

1919

* Device Size: 13.5 x 7 x 3 cm

1920

* Device Weight: 105g

1921

* Package Size / pcs : 14.5 x 8 x 5 cm

1922

* Weight / pcs : 170g

1923

1924

= 10. FCC Caution for RS485LN-US915 =

(((

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

)))

(((

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

)))

(((

)))

(((

(% style="color:red" %)**IMPORTANT NOTE:**

)))

(((

(% style="color:red" %)**Note: **(%%)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

)))

(((

—Reorient or relocate the receiving antenna.

)))

(((

—Increase the separation between the equipment and receiver.

)))

(((

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

)))

(((

—Consult the dealer or an experienced radio/TV technician for help.

)))

(((

)))

(((

(% style="color:red" %)**FCC Radiation Exposure Statement:**

)))

(((

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

)))

= 11. Support =

* (((

Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1981

)))

1982

* (((

1983

Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].

)))

Wiki source code of RS485-LN – RS485 to LoRaWAN Converter User Manual