Changes for page RS485-LN – RS485 to LoRaWAN Converter User Manual

Last modified by Mengting Qiu on 2025/07/14 09:59

From 33.1 to 32.18 From 102.12 to 102.11

From version 102.11

edited by Xiaoling
on 2023/04/25 11:38

Change comment: There is no comment for this version

To version 33.1

edited by Xiaoling
on 2022/06/02 15:36

Change comment: Uploaded new attachment "image-20220602153621-1.png", version {1}

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 41 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--RS485-LN – RS485 to LoRaWAN Converter User Manual
++RS485-LN – RS485 to LoRaWAN Converter

Content

@@ -1,39 +1,23 @@
--(% aria-label="1653266934636-343.png image widget" contenteditable="false" role="region" tabindex="-1" %)
--(((
--(% data-widget="image" style="text-align:center" %)
--[[image:1653266934636-343.png||height="385" width="385"]](% title="Click and drag to resize" %)
++(% style="text-align:center" %)
++[[image:1653266934636-343.png||height="385" width="385"]]
--(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||height="15" role="presentation" title="Click and drag to move" width="15"]]
--)))
++**RS485-LN – RS485 to LoRaWAN Converter User Manual**
--
--
--
  **Table of Contents:**
--{{toc/}}
--(% aria-label="macro:toc widget" contenteditable="false" role="region" tabindex="-1" %)
--(((
--(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||height="15" role="presentation" title="Click and drag to move" width="15"]]
--)))
++= 1.Introduction =
--
--
--
--
--= 1. Introduction =
--
  == 1.1 What is RS485-LN RS485 to LoRaWAN Converter ==
--
  (((
++(((
  The Dragino RS485-LN is a (% style="color:blue" %)**RS485 to LoRaWAN Converter**(%%). It converts the RS485 signal into LoRaWAN wireless signal which simplify the IoT installation and reduce the installation/maintaining cost.
  )))
@@ -47,33 +47,31 @@
  (((
  (% style="color:blue" %)**For data downlink**(%%), RS485-LN runs in LoRaWAN Class C. When there downlink commands from LoRaWAN server, RS485-LN will forward the commands from LoRaWAN server to RS485 devices.
--)))
--(((
  (% style="color:blue" %)**Demo Dashboard for RS485-LN**(%%) connect to two energy meters: [[https:~~/~~/app.datacake.de/dashboard/d/58844a26-378d-4c5a-aaf5-b5b5b153447a>>url:https://app.datacake.de/dashboard/d/58844a26-378d-4c5a-aaf5-b5b5b153447a]]
  )))
++)))
++[[image:1653267211009-519.png||height="419" width="724"]]
--(% aria-label="1653267211009-519.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653267211009-519.png||data-widget="image" height="419" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--
  == 1.2 Specifications ==
--(% style="color:#037691" %)**Hardware System:**
++**Hardware System:**
--* STM32L072xxxx MCU
++* STM32L072CZT6 MCU
  * SX1276/78 Wireless Chip
  * Power Consumption (exclude RS485 device):
  ** Idle: 32mA@12v
  ** 20dB Transmit: 65mA@12v
--(% style="color:#037691" %)**Interface for Model:**
++**Interface for Model:**
  * RS485
  * Power Input 7~~ 24V DC.
--(% style="color:#037691" %)**LoRa Spec:**
++**LoRa Spec:**
  * Frequency Range:
  ** Band 1 (HF): 862 ~~ 1020 Mhz
@@ -92,13 +92,14 @@
  * Preamble detection.
  * 127 dB Dynamic Range RSSI.
  * Automatic RF Sense and CAD with ultra-fast AFC.
--* Packet engine up to 256 bytes with CRC
++* Packet engine up to 256 bytes with CRC.
--== 1.3 Features ==
++== 1.3 Features ==
++
  * LoRaWAN Class A & Class C protocol (default Class C)
--* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864/MA869
++* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864
  * AT Commands to change parameters
  * Remote configure parameters via LoRa Downlink
  * Firmware upgradable via program port
@@ -106,9 +106,10 @@
  * Support Modbus protocol
  * Support Interrupt uplink (Since hardware version v1.2)
--== 1.4 Applications ==
++== 1.4 Applications ==
++
  * Smart Buildings & Home Automation
  * Logistics and Supply Chain Management
  * Smart Metering
@@ -116,24 +116,20 @@
  * Smart Cities
  * Smart Factory
--== 1.5 Firmware Change log ==
++== 1.5 Firmware Change log ==
++
  [[RS485-LN Image files – Download link and Change log>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/]]
  == 1.6 Hardware Change log ==
--
  (((
  (((
--(((
  v1.2: Add External Interrupt Pin.
--)))
--(((
  v1.0: Release
--)))
  )))
@@ -141,7 +141,6 @@
  = 2. Power ON Device =
--
  (((
  The RS485-LN can be powered by 7 ~~ 24V DC power source. Connection as below
@@ -152,7 +152,7 @@
  Once there is power, the RS485-LN will be on.
  )))
--(% aria-label="1653268091319-405.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653268091319-405.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++[[image:1653268091319-405.png]]
  )))
@@ -161,11 +161,8 @@
  == 3.1 How it works? ==
--
  (((
--(((
  The RS485-LN is configured as LoRaWAN OTAA Class C mode by default. It has OTAA keys to join network. To connect a local LoRaWAN network, user just need to input the OTAA keys in the network server and power on the RS485-LN. It will auto join the network via OTAA.
--)))
  )))
@@ -172,13 +172,11 @@
  == 3.2 Example to join LoRaWAN network ==
--
  Here shows an example for how to join the TTN V3 Network. Below is the network structure, we use [[LG308>>url:http://www.dragino.com/products/lora-lorawan-gateway/item/140-lg308.html]] as LoRaWAN gateway here.
++[[image:1653268155545-638.png||height="334" width="724"]]
--(% aria-label="1653268155545-638.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653268155545-638.png||data-widget="image" height="334" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--
  (((
  (((
  The RS485-LN in this example connected to two RS485 devices for demonstration, user can connect to other RS485 devices via the same method. The connection is as below:
@@ -186,21 +186,16 @@
  (((
 A+ and 485B- of the sensor are connected to RS485A and RA485B of RS485-LN respectively.
--
--
  )))
--(% aria-label="1653268227651-549.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1653268227651-549.png||data-widget="image" height="592" width="720"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++[[image:1653268227651-549.png||height="592" width="720"]]
--
  (((
--The LG308 is already set to connect to [[TTN V3 network >>path:https://www.thethingsnetwork.org/]]. So what we need to now is only configure the TTN V3:
--
--
++The LG308 is already set to connect to [[TTN V3 network >>path:eu1.cloud.thethings.network/]]. So what we need to now is only configure the TTN V3:
  )))
  (((
--(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from RS485-LN.
++**Step 1**: Create a device in TTN V3 with the OTAA keys from RS485-LN.
  )))
  (((
@@ -208,93 +208,73 @@
  )))
  )))
--(% aria-label="1652953462722-299.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953462722-299.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++[[image:1652953462722-299.png]]
--
  (((
  (((
  User can enter this key in their LoRaWAN Server portal. Below is TTN V3 screen shot:
--
--
  )))
  (((
--**Add APP EUI in the application.**
++Add APP EUI in the application.
  )))
  )))
--(% aria-label="image-20220519174512-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-1.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++[[image:image-20220519174512-1.png]]
--(% aria-label="image-20220519174512-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-2.png||data-widget="image" height="323" width="720"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++[[image:image-20220519174512-2.png||height="323" width="720"]]
--(% aria-label="image-20220519174512-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-3.png||data-widget="image" height="556" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++[[image:image-20220519174512-3.png||height="556" width="724"]]
--(% aria-label="image-20220519174512-4.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220519174512-4.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]
++[[image:image-20220519174512-4.png]]
--
--(% title="Click and drag to resize" %)
--
  You can also choose to create the device manually.
--(% aria-label="1652953542269-423.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953542269-423.png||data-widget="image" height="710" width="723"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++[[image:1652953542269-423.png||height="710" width="723"]]
++Add APP KEY and DEV EUI
++[[image:1652953553383-907.png||height="514" width="724"]]
--**Add APP KEY and DEV EUI**
--(% aria-label="1652953553383-907.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953553383-907.png||data-widget="image" height="514" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--
--
--
  (((
--(% style="color:blue" %)**Step 2**(%%): Power on RS485-LN and it will auto join to the TTN V3 network. After join success, it will start to upload message to TTN V3 and user can see in the panel.
--
--
++**Step 2**: Power on RS485-LN and it will auto join to the TTN V3 network. After join success, it will start to upload message to TTN V3 and user can see in the panel.
  )))
--(% aria-label="1652953568895-172.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1652953568895-172.png||data-widget="image" height="232" width="724"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++[[image:1652953568895-172.png||height="232" width="724"]]
  == 3.3 Configure Commands to read data ==
--
  (((
  (((
--(((
--There are plenty of RS485 devices in the market and each device has different command to read the valid data. To support these devices in flexible, RS485-LN supports flexible command set. User can use [[AT Commands>>||anchor="H3.5ConfigureRS485-LNviaATorDownlink"]] or LoRaWAN Downlink Command to configure what commands RS485-LN should send for each sampling and how to handle the return from RS485 devices.
--
--
++There are plenty of RS485 devices in the market and each device has different command to read the valid data. To support these devices in flexible, RS485-LN supports flexible command set. User can use [[AT Commands>>path:#AT_COMMAND]] or LoRaWAN Downlink Command to configure what commands RS485-LN should send for each sampling and how to handle the return from RS485 devices.
  )))
--)))
  (((
--(((
--(% style="color:red" %)**Note: below description and commands are for firmware version >v1.1, if you have firmware version v1.0. Please check the [[user manual v1.0>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/&file=RS485-LN_UserManual_v1.0.1.pdf]] or upgrade the firmware to v1.1**
--)))
++(% style="color:red" %)Note: below description and commands are for firmware version >v1.1, if you have firmware version v1.0. Please check the [[user manual v1.0>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/&file=RS485-LN_UserManual_v1.0.1.pdf]] or upgrade the firmware to v1.1
  )))
  )))
--=== 3.3.1 Configure UART settings for RS485 or TTL communication ===
++=== 3.3.1 onfigure UART settings for RS485 or TTL communication ===
--
  To use RS485-LN to read data from RS485 sensors, connect the RS485-LN A/B traces to the sensors. And user need to make sure RS485-LN use the match UART setting to access the sensors. The related commands for UART settings are:
--
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 119px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)(((
++(% border="1" style="background-color:#ffffcc; color:green; width:782px" %)
++|(% style="width:128px" %)(((
  **AT Commands**
--)))|=(% style="width: 116px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)(((
++)))|(% style="width:305px" %)(((
  **Description**
--)))|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)(((
++)))|(% style="width:346px" %)(((
  **Example**
  )))
--|(% style="width:119px" %)(((
++|(% style="width:128px" %)(((
  AT+BAUDR
--)))|(% style="width:116px" %)(((
++)))|(% style="width:305px" %)(((
  Set the baud rate (for RS485 connection). Default Value is: 9600.
--)))|(% style="width:190px" %)(((
++)))|(% style="width:346px" %)(((
  (((
  AT+BAUDR=9600
  )))
@@ -303,11 +303,11 @@
  Options: (1200,2400,4800,14400,19200,115200)
  )))
  )))
--|(% style="width:119px" %)(((
++|(% style="width:128px" %)(((
  AT+PARITY
--)))|(% style="width:116px" %)(((
++)))|(% style="width:305px" %)(((
  Set UART parity (for RS485 connection)
--)))|(% style="width:190px" %)(((
++)))|(% style="width:346px" %)(((
  (((
  AT+PARITY=0
  )))
@@ -316,9 +316,9 @@
  Option: 0: no parity, 1: odd parity, 2: even parity
  )))
  )))
--|(% style="width:119px" %)(((
++|(% style="width:128px" %)(((
  AT+STOPBIT
--)))|(% style="width:116px" %)(((
++)))|(% style="width:305px" %)(((
  (((
  Set serial stopbit (for RS485 connection)
  )))
@@ -326,7 +326,7 @@
  (((
  )))
--)))|(% style="width:190px" %)(((
++)))|(% style="width:346px" %)(((
  (((
  AT+STOPBIT=0 for 1bit
  )))
@@ -340,1441 +340,910 @@
  )))
  )))
--=== 3.3.2 Configure sensors ===
++=== 3.3.2 Configure sensors ===
++
  (((
  (((
--Some sensors might need to configure before normal operation. User can configure such sensor via PC and RS485 adapter or through RS485-LN AT Commands (% style="color:#4f81bd" %)**AT+CFGDEV**(%%). Each (% style="color:#4f81bd" %)**AT+CFGDEV **(%%)equals to send a RS485 command to sensors. This command will only run when user input it and won't run during each sampling.
--
--
++Some sensors might need to configure before normal operation. User can configure such sensor via PC and RS485 adapter or through RS485-LN AT Commands (% style="color:#4f81bd" %)**AT+CFGDEV**(%%). Each (% style="color:#4f81bd" %)**AT+CFGDEV **(%%)equals to send a RS485 command to sensors. This command will only run when user input it and won’t run during each sampling.
  )))
  )))
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 122px; background-color:#D9E2F3;color:#0070C0" %)**AT Commands**|=(% style="width: 198px; background-color:#D9E2F3;color:#0070C0" %)**Description**|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)**Example**
--|(% style="width:122px" %)AT+CFGDEV|(% style="width:196px" %)(((
--(((
++(% border="1" style="background-color:#ffffcc; color:green; width:806px" %)
++|**AT Commands**|(% style="width:418px" %)**Description**|(% style="width:256px" %)**Example**
++|AT+CFGDEV|(% style="width:418px" %)(((
  This command is used to configure the RS485/TTL devices; they won’t be used during sampling.
--)))
--(((
  AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,
--)))
--(((
  mm: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command
--)))
--)))|(% style="width:190px" %)AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,m
++)))|(% style="width:256px" %)AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,m
--=== 3.3.3 Configure read commands for each sampling ===
--(((
--During each sampling, we need confirm what commands we need to send to the RS485 sensors to read data. After the RS485 sensors send back the value, it normally include some bytes and we only need a few from them for a shorten payload.
++=== 3.3.3 Configure read commands for each sampling ===
--To save the LoRaWAN network bandwidth, we might need to read data from different sensors and combine their valid value into a short payload.
--
--This section describes how to achieve above goals.
--
--During each sampling, the RS485-LN can support 15 commands to read sensors. And combine the return to one or several uplink payloads.
--
--
--(% style="color:#037691" %)**Each RS485 commands include two parts:**
--
--
--~1. What commands RS485-LN will send to the RS485 sensors. There are total 15 commands from **AT+COMMAD1**, **ATCOMMAND2**,…, to **AT+COMMANDF**. All commands are of same grammar.
--
--2. How to get wanted value the from RS485 sensors returns from by 1). There are total 15 AT Commands to handle the return, commands are **AT+DATACUT1**,**AT+DATACUT2**,…, **AT+DATACUTF** corresponding to the commands from 1). All commands are of same grammar.
--
--3. Some RS485 device might has longer delay on reply, so user can use AT+CMDDL to set the timeout for getting reply after the RS485 command is sent. For example **AT+CMDDL1=1000** to send the open time to 1000ms
--
--
--After we got the valid value from each RS485 commands, we need to combine them together with the command **AT+DATAUP**.
--
--Below are examples for the how above AT Commands works.
--
--
--(% style="color:#037691" %)**AT+COMMANDx **(%%)**: **This command will be sent to RS485 devices during each sampling, Max command length is 14 bytes. The grammar is:
--
--(% border="1" style="background-color:#f2f2f2; width:499px" %)
--|(% style="width:496px" %)(((
--**AT+COMMANDx=xx xx xx xx xx xx xx xx xx xx xx xx,m**
--
--**xx xx xx xx xx xx xx xx xx xx xx xx: The RS485 command to be sent**
--
--**m: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command**
--)))
--
--For example, if we have a RS485 sensor. The command to get sensor value is: 01 03 0B B8 00 02 46 0A. Where 01 03 0B B8 00 02 is the Modbus command to read the register 0B B8 where stored the sensor value. The 46 0A is the CRC-16/MODBUS which calculate manually.
--
--In the RS485-LN, we should use this command AT+COMMAND1=01 03 0B B8 00 02,1 for the same.
--
--
--(% style="color:#037691" %)**AT+DATACUTx **(%%)**: **This command defines how to handle the return from AT+COMMANDx, max return length is 100 bytes.
--
--(% border="1" style="background-color:#f2f2f2; width:510px" %)
--|(% style="width:510px" %)(((
--**AT+DATACUTx=a,b,c**
--
--* **a: length for the return of AT+COMMAND**
--* **b:1: grab valid value by byte, max 6 bytes. 2: grab valid value by bytes section, max 3 sections.**
--* **c: define the position for valid value.  **
--)))
--
--**Examples:**
--
--
--* (% style="color:#037691" %)**Grab bytes**
--
--(% aria-label="image-20220602153621-1.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602153621-1.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--
--
--
--* (% style="color:#037691" %)**Grab a section**
--
--(% aria-label="image-20220602153621-2.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602153621-2.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--
--
--
--* (% style="color:#037691" %)**Grab different sections**
--
--(% aria-label="image-20220602153621-3.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602153621-3.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--
--
--)))
--
--=== 3.3.4 Compose the uplink payload ===
--
--
  (((
--Through AT+COMMANDx and AT+DATACUTx we got valid value from each RS485 commands, Assume these valid value are RETURN1, RETURN2, .., to RETURNx. The next step is how to compose the LoRa Uplink Payload by these RETURNs. The command is **AT+DATAUP.**
--
--
++RS485-BL is a battery powered device; it will sleep most of time. And wake up on each period and read RS485 / TTL sensor data and uplink.
  )))
  (((
--(% style="color:#037691" %)**Examples: AT+DATAUP=0**
--
--
++During each sampling, we need to confirm what commands we need to send to the sensors to read data. After the RS485/TTL sensors send back the value, it normally includes some bytes and we only need a few from them for a shorten payload.
  )))
  (((
--Compose the uplink payload with value returns in sequence and send with (% style="color:red" %)**A SIGNLE UPLINK**.
++To save the LoRaWAN network bandwidth, we might need to read data from different sensors and combine their valid value into a short payload.
  )))
  (((
--Final Payload is (% style="color:#4f81bd" %)**Battery Info+PAYVER + VALID Value from RETURN1 + Valid Value from RETURN2 + … + RETURNx**
++This section describes how to achieve above goals.
  )))
  (((
--Where PAYVER is defined by AT+PAYVER, below is an example screen shot.
--
--
++During each sampling, the RS485-BL can support 15 commands to read sensors. And combine the return to one or several uplink payloads.
  )))
--[[image:image-20220929111027-1.png||height="509" width="685"]](% title="Click and drag to resize" %)
--
--
--(% style="color:#037691" %)**Examples: AT+DATAUP=1**
--
--
--Compose the uplink payload with value returns in sequence and send with (% style="color:red" %)**Multiply UPLINKs**.
--
--Final Payload is (% style="color:#4f81bd" %)**PAYVER + PAYLOAD COUNT + PAYLOAD# + DATA**
--
--
--~1. PAYVER: Defined by AT+PAYVER
--
--2. PAYLOAD COUNT: Total how many uplinks of this sampling.
--
--3. PAYLOAD#: Number of this uplink. (from 0,1,2,3…,to PAYLOAD COUNT)
--
--4. DATA: Valid value: max 8 bytes for each uplink so each uplink <= 11 bytes. For the last uplink, DATA will might less than 8 bytes
--
--
--(% aria-label="image-20220602155039-4.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602155039-4.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--
--
--So totally there will be 3 uplinks for this sampling, each uplink include 8 bytes DATA
--
--DATA1=RETURN1 Valid Value + the first two of Valid value of RETURN10= **20 20 0a 33 90 41 02 aa**
--
--DATA2=3^^rd^^ ~~ 10^^th^^ byte of Valid value of RETURN10= **05 81 0a 20 20 20 20 2d**
--
--DATA3=the rest of Valid value of RETURN10= **30**
--
--
--(% style="color:red" %)**Notice: In firmware v1.3, the Max bytes has been changed according to the max bytes in different Frequency Bands for lowest SF. As below:**
--
--
--   ~* For AU915/AS923 bands, if UplinkDwell time=0, max 51 bytes for each uplink.
--
--   * For AU915/AS923 bands, if UplinkDwell time=0, max 11 bytes for each uplink.
--
--   * For US915 band, max 11 bytes for each uplink.
--
--   ~* For all other bands: max 51 bytes for each uplink.
--
--
--(% style="color:red" %)** When AT+DATAUP=1, the maximum number of segments is 15, and the maximum total number of bytes is 1500;**
--
--(% style="color:red" %)** When AT+DATAUP=1 and AT+ADR=0, the maximum number of bytes of each payload is determined by the DR value. (Since v1.4.0)**
--
--
--
--Below are the uplink payloads:
--
--
--(% aria-label="1654157178836-407.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654157178836-407.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--
--
--=== 3.3.5 Uplink on demand ===
--
--
--Except uplink periodically, RS485-LN is able to uplink on demand. The server send downlink command to RS485-LN and RS485 will uplink data base on the command.
--
--(% style="color:blue" %)**Downlink control command:**
--
--(% style="color:#4472c4" %)** 0x08 command**(%%): Poll an uplink with current command set in RS485-LN.
--
--(% style="color:#4472c4" %)** 0xA8 command**(%%): Send a command to RS485-LN and uplink the output from sensors.
--
--
--=== 3.3.6 Uplink on Interrupt ===
--
--
--RS485-LN support external Interrupt uplink since hardware v1.2 release.
--
--
--(% aria-label="1654157342174-798.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654157342174-798.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--
--Connect the Interrupt pin to RS485-LN INT port and connect the GND pin to V- port. When there is a high voltage (Max 24v) on INT pin. Device will send an uplink packet.
--
--
--== 3.4 Uplink Payload ==
--
--
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
--|=(% scope="row" style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
--Size(bytes)
--)))|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:360px" %)(((
--**Length depends on the return from the commands**
--)))
--|=(% style="width: 90px;" %)(((
--Value
--)))|(% style="width:114px" %)(((
--PAYLOAD_VER
--)))|(% style="width:353px" %)(((
--If the valid payload is too long and exceed the maximum
--
--support payload length in server, server will show payload not
--
--provided in the LoRaWAN server.
--)))
--
--(% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]
--
--(% title="Click and drag to resize" %)
--
--Below is the decoder for the first 3 bytes. The rest bytes are dynamic depends on different RS485 sensors.
--
--
--== 3.5 Configure RS485-LN via AT or Downlink ==
--
--
  (((
--User can configure RS485-LN via AT Commands or LoRaWAN Downlink Commands
++**Command from RS485-BL to Sensor:**
  )))
  (((
--There are two kinds of Commands:
++RS485-BL can send out pre-set max 15 strings via **AT+COMMAD1**, **ATCOMMAND2**,…, to **AT+COMMANDF** . All commands are of same grammar.
  )))
--* (((
--(% style="color:#4f81bd" %)**Common Commands**(%%): They should be available for each sensor, such as: change uplink interval, reset device. For firmware v1.3, user can find what common commands it supports: [[AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
--)))
--
--* (((
--(% style="color:#4f81bd" %)**Sensor Related Commands**(%%): These commands are special designed for RS485-LN.  User can see these commands below:
--)))
--
  (((
--
++**Handle return from sensors to RS485-BL**:
  )))
--
--=== 3.5.1 Common Commands ===
--
--
--They should be available for each of Dragino Sensors, such as: change uplink interval, reset device. For firmware v1.3, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
--
--
--=== 3.5.2 Downlink Response(Since firmware v1.4) ===
--
--
--Response feature is added to the server's downlink, a special package with a FPort of 200 will be uploaded immediately after receiving the data sent by the server.
--
--
--(% aria-label="image-20220602163333-5.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602163333-5.png||data-widget="image" height="263" width="1160"]]
--
--(% title="Click and drag to resize" %)
--
--The first byte of this package represents whether the configuration is successful, 00 represents failure, 01 represents success. Except for the first byte, the other is the previous downlink. (All commands except A8 type commands are applicable)
--
--
--=== 3.5.3 Sensor related commands ===
--
--
--
--==== (% style="color:blue" %)**RS485 Debug Command**(%%) ====
--
--
  (((
--This command is used to configure the RS485 devices; they won't be used during sampling. Max Length of AT+CFGDEV is **40 bytes**.
++After RS485-BL send out a string to sensor, RS485-BL will wait for the return from RS485 or TTL sensor. And user can specify how to handle the return, by **AT+DATACUT or AT+SEARCH commands**
  )))
--(((
--* (% style="color:#037691" %)**AT Command**
--
--(((
--(% style="color:#4472c4" %)** AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,m**  (%%)         m: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command
++* (((
++**AT+DATACUT**
  )))
--)))
  (((
--
++When the return value from sensor have fix length and we know which position the valid value we should get, we can use AT+DATACUT command.
  )))
  * (((
--(% style="color:#037691" %)**Downlink Payload**
++**AT+SEARCH**
  )))
  (((
--Format: (% style="color:#4472c4" %)** A8 MM NN XX XX XX XX YY**
++When the return value from sensor is dynamic length and we are not sure which bytes the valid data is, instead, we know what value the valid value following. We can use AT+SEARCH to search the valid value in the return string.
  )))
  (((
--Where:
++**Define wait timeout:**
  )))
--* (((
--MM: 1: add CRC-16/MODBUS ; 0: no CRC
--)))
--* (((
--NN: The length of RS485 command
--)))
--* (((
--XX XX XX XX: RS485 command total NN bytes
--)))
--* (((
  (((
--YY: How many bytes will be uplink from the return of this RS485 command,
++Some RS485 device might has longer delay on reply, so user can use AT+CMDDL to set the timeout for getting reply after the RS485 command is sent. For example, AT+CMDDL1=1000 to send the open time to 1000ms
  )))
--* (((
--if YY=0, RS485-LN will execute the downlink command without uplink;
--)))
--* (((
--if YY>0, RS485-LN will uplink total YY bytes from the output of this RS485 command; Fport=200
--)))
--* (((
--if YY=FF, RS485-LN will uplink RS485 output with the downlink command content; Fport=200.
--)))
--)))
--
  (((
--
--
--(% style="color:blue" %)**Example 1:**  (%%)  ~-~-> Configure without ask for uplink (YY=0)
++After we got the valid value from each RS485 commands, we need to combine them together with the command **AT+DATAUP**.
  )))
--(((
--To connect a Modbus Alarm with below commands.
--)))
++**Examples:**
--* (((
--The command to active alarm is: 0A 05 00 04 00 01 4C B0. Where 0A 05 00 04 00 01 is the Modbus command to read the register 00 40 where stored the DI status. The 4C B0 is the CRC-16/MODBUS which calculate manually.
--)))
++Below are examples for the how above AT Commands works.
--* (((
--The command to deactivate alarm is: 0A 05 00 04 00 00 8D 70. Where 0A 05 00 04 00 00 is the Modbus command to read the register 00 40 where stored the DI status. The 8D 70 is the CRC-16/MODBUS which calculate manually.
--)))
++**AT+COMMANDx : **This command will be sent to RS485/TTL devices during each sampling, Max command length is 14 bytes. The grammar is:
--(((
--
++(% border="1" class="table-bordered" %)
++|(((
++**AT+COMMANDx=xx xx xx xx xx xx xx xx xx xx xx xx,m**
--So if user want to use downlink command to control to RS485 Alarm, he can use:
--)))
++**xx xx xx xx xx xx xx xx xx xx xx xx: The RS485 command to be sent**
--(((
--(% style="color:#4f81bd" %)**A8 01 06 0A 05 00 04 00 01 00**(%%): to activate the RS485 Alarm
++**m: 0: no CRC, 1: add CRC-16/MODBUS in the end of this command**
  )))
  (((
--(% style="color:#4f81bd" %)**A8 01 06 0A 05 00 04 00 00 00**(%%): to deactivate the RS485 Alarm
++For example, if we have a RS485 sensor. The command to get sensor value is: 01 03 0B B8 00 02 46 0A. Where 01 03 0B B8 00 02 is the Modbus command to read the register 0B B8 where stored the sensor value. The 46 0A is the CRC-16/MODBUS which calculate manually.
  )))
  (((
--A8 is type code and 01 means add CRC-16/MODBUS at the end, the 3^^rd^^ byte is 06, means the next 6 bytes are the command to be sent to the RS485 network, the final byte 00 means this command don’t need to acquire output.
++In the RS485-BL, we should use this command AT+COMMAND1=01 03 0B B8 00 02,1 for the same.
  )))
  (((
--
++**AT+SEARCHx**: This command defines how to handle the return from AT+COMMANDx.
  )))
--(((
--(% style="color:blue" %)**Example 2:**  (%%)      ~-~-> Configure with requesting uplink and original downlink command (**YY=FF**)
--)))
++(% border="1" class="table-bordered" %)
++|(((
++**AT+SEARCHx=aa,xx xx xx xx xx**
--(((
--User in IoT server send a downlink command: (% style="color:#4f81bd" %)**A8 01 06 0A 08 00 04 00 01 YY**
--)))
++* **aa: 1: prefix match mode; 2: prefix and suffix match mode**
++* **xx xx xx xx xx: match string. Max 5 bytes for prefix and 5 bytes for suffix**
--(((
  )))
--(((
--(((
--RS485-LN got this downlink command and send (% style="color:#4f81bd" %)**0A 08 00 04 00 01 **(%%)to Modbus network. One of the RS485 sensor in the network send back Modbus reply **0A 08 00 04 00 00**. RS485-LN get this reply and combine with the original downlink command and uplink. The uplink message is:    **A8** (% style="color:#4f81bd" %)**0A 08 00 04 00  **(% style="color:red" %)**01 06** ** **(% style="color:green" %)**0A 08 00 04 00 00**
--)))
++**Examples:**
--
--)))
++~1. For a return string from AT+COMMAND1: 16 0c 1e 56 34 2e 30 58 5f 36 41 30 31 00 49
--(((
-- (% aria-label="1654159460680-153.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654159460680-153.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--)))
++If we set AT+SEARCH1=1,1E 56 34.      (max 5 bytes for prefix)
++The valid data will be all bytes after 1E 56 34 , so it is (% style="background-color:yellow" %)** 2e 30 58 5f 36 41 30 31 00 49**
++[[image:1653269403619-508.png]]
--==== (% style="color:blue" %)**Set Payload version**(%%) ====
++2. For a return string from AT+COMMAND1:  16 0c 1e 56 34 2e 30 58 5f 36 41 30 31 00 49
++If we set AT+SEARCH1=2, 1E 56 34+31 00 49
--(((
--This is the first byte of the uplink payload. RS485-LN can connect to different sensors. User can set the PAYVER field to tell server how to decode the current payload.
--)))
++Device will search the bytes between 1E 56 34 and 31 00 49. So it is (% style="background-color:yellow" %)** 2e 30 58 5f 36 41 30**
--(((
--* (% style="color:#037691" %)**AT Command:**
++[[image:1653269438444-278.png]]
--(% style="color:#4472c4" %)** AT+PAYVER:    ** (%%) Set PAYVER field = 1
++**AT+DATACUTx : **This command defines how to handle the return from AT+COMMANDx, max return length is 45 bytes.
--
--)))
++|(((
++**AT+DATACUTx=a,b,c**
--* (((
--(% style="color:#037691" %)**Downlink Payload:**
++* **a: length for the return of AT+COMMAND**
++* **b:1: grab valid value by byte, max 6 bytes. 2: grab valid value by bytes section, max 3 sections.**
++* **c: define the position for valid value.  **
  )))
--(((
--(% style="color:#4472c4" %)** 0xAE 01** (%%)   ~-~->     Set PAYVER field =  0x01
--)))
++Examples:
--(((
--(% style="color:#4472c4" %)** 0xAE 0F**   (%%) ~-~->     Set PAYVER field =  0x0F
--)))
++* Grab bytes:
++[[image:1653269551753-223.png||height="311" width="717"]]
--**1 )  Add the interrupt flag at the highest bit of the Payver byte, that is, Byte7 of the first byte. (Since v1.4.0)**
++* Grab a section.
++[[image:1653269568276-930.png||height="325" width="718"]]
--[[image:image-20220824145428-2.png||height="168" width="1300"]]
++* Grab different sections.
++[[image:1653269593172-426.png||height="303" width="725"]]
++(% style="color:red" %)**Note:**
--**2 )  if the data intercepted by AT+DATACUT or AT+MBFUN is empty, it will display NULL, and the payload will be filled with n FFs.**
++AT+SEARCHx and AT+DATACUTx can be used together, if both commands are set, RS485-BL will first process AT+SEARCHx on the return string and get a temporary string, and then process AT+DATACUTx on this temporary string to get the final payload. In this case, AT+DATACUTx need to set to format AT+DATACUTx=0,xx,xx where the return bytes set to 0.
++Example:
--[[image:image-20220824145428-3.png||height="308" width="1200"]]
++(% style="color:red" %)AT+COMMAND1=11 01 1E D0,0
++(% style="color:red" %)AT+SEARCH1=1,1E 56 34
++(% style="color:red" %)AT+DATACUT1=0,2,1~~5
--==== (% style="color:blue" %)**Set RS485 Sampling Commands**(%%) ====
++(% style="color:red" %)Return string from AT+COMMAND1: 16 0c 1e 56 34 2e 30 58 5f 36 41 30 31 00 49
++(% style="color:red" %)String after SEARCH command: 2e 30 58 5f 36 41 30 31 00 49
--(((
--AT+COMMANDx or AT+DATACUTx
--)))
++(% style="color:red" %)Valid payload after DataCUT command: 2e 30 58 5f 36
--(((
--These three commands are used to configure how the RS485-LN polling data from Modbus device. Detail of usage please see : [[polling RS485 device>>||anchor="H3.3.3Configurereadcommandsforeachsampling"]].
--)))
++[[image:1653269618463-608.png]]
--(((
--
--)))
++=== 3.3.4 Compose the uplink payload ===
--* (((
--(% style="color:#037691" %)**AT Command:**
--)))
--
--(% style="color:#4472c4" %)** AT+COMMANDx:    ** (%%) Configure RS485 read command to sensor.
--
--(% style="color:#4472c4" %)** AT+DATACUTx:        **(%%)  Configure how to handle return from RS485 devices.
--
--
--* (((
--(% style="color:#037691" %)**Downlink Payload:**
--)))
--
  (((
--(% style="color:#4472c4" %)** 0xAF**(%%)  downlink command can be used to set AT+COMMANDx or AT+DATACUTx.
--
--
++Through AT+COMMANDx and AT+DATACUTx we got valid value from each RS485 commands, Assume these valid value are RETURN1, RETURN2, .., to RETURNx. The next step is how to compose the LoRa Uplink Payload by these RETURNs. The command is **AT+DATAUP.**
  )))
  (((
--(% style="color:red" %)**Note : if user use AT+COMMANDx to add a new command, he also need to send AT+DATACUTx downlink.**
--
--
++(% style="color:#4f81bd" %)**Examples: AT+DATAUP=0**
  )))
  (((
--Format: (% style="color:#4472c4" %)** AF MM NN LL XX XX XX XX YY**
++Compose the uplink payload with value returns in sequence and send with (% style="color:red" %)**A SIGNLE UPLINK**.
  )))
  (((
--Where:
++Final Payload is
  )))
--* (((
--MM: the ATCOMMAND or AT+DATACUT to be set. Value from 01 ~~ 0F,
--)))
--* (((
--NN:  0: no CRC; 1: add CRC-16/MODBUS ; 2: set the AT+DATACUT value.
--)))
--* (((
--LL:   The length of AT+COMMAND or AT+DATACUT command
--)))
--* (((
--XX XX XX XX: AT+COMMAND or AT+DATACUT command
--)))
--* (((
--YY:   If YY=0, RS485-LN will execute the downlink command without uplink; if YY=1, RS485-LN will execute an uplink after got this command.
--)))
--
  (((
--
--
--**Example:**
++(% style="color:#4f81bd" %)**Battery Info+PAYVER + VALID Value from RETURN1 + Valid Value from RETURN2 + … + RETURNx**
  )))
  (((
--(% style="color:#037691" %)**AF 03 01 06 0A 05 00 04 00 01 00**(%%): Same as AT+COMMAND3=0A 05 00 04 00 01,1
++Where PAYVER is defined by AT+PAYVER, below is an example screen shot.
  )))
--(((
--(% style="color:#037691" %)**AF 03 02 06**(% style="color:orange" %)** 10 **(% style="color:red" %)**01 **(% style="color:green" %)**05 06 09 0A**(% style="color:#037691" %)** 00**(%%): Same as AT+DATACUT3=(% style="color:orange" %)**16**(%%),(% style="color:red" %)**1**(%%),(% style="color:green" %)**5+6+9+10**
--)))
++[[image:1653269759169-150.png||height="513" width="716"]]
--(((
--(% style="color:#037691" %)**AF 03 02 06 **(% style="color:orange" %)**0B**(% style="color:red" %)** 02 **(% style="color:green" %)**05 07 08 0A **(% style="color:#037691" %)**00**(%%): Same as AT+DATACUT3=(% style="color:orange" %)**11**(%%),(% style="color:red" %)**2**(%%),(% style="color:green" %)**5~~7+8~~10**
--)))
++(% style="color:#4f81bd" %)**Examples: AT+DATAUP=1**
++Compose the uplink payload with value returns in sequence and send with (% style="color:red" %)**Multiply UPLINKs**.
++Final Payload is
--==== (% style="color:blue" %)**Fast command to handle MODBUS device**(%%) ====
++(% style="color:#4f81bd" %)**Battery Info+PAYVER + PAYLOAD COUNT + PAYLOAD# + DATA**
++1. Battery Info (2 bytes): Battery voltage
++1. PAYVER (1 byte): Defined by AT+PAYVER
++1. PAYLOAD COUNT (1 byte): Total how many uplinks of this sampling.
++1. PAYLOAD# (1 byte): Number of this uplink. (from 0,1,2,3…,to PAYLOAD COUNT)
++1. DATA: Valid value: max 6 bytes(US915 version here, Notice*!) for each uplink so each uplink <= 11 bytes. For the last uplink, DATA will might less than 6 bytes
--(((
--(% style="color:#4472c4" %)** AT+MBFUN**(%%) is valid since v1.3 firmware version. The command is for fast configure to read Modbus devices. It is only valid for the devices which follow the [[MODBUS-RTU protocol>>url:https://www.modbustools.com/modbus.html]].
--)))
++[[image:1653269916228-732.png||height="433" width="711"]]
--(((
--This command is valid since v1.3 firmware version
--)))
--(((
--AT+MBFUN can auto read the Modbus function code: 01, 02, 03 or 04. AT+MBFUN has lower priority vs AT+DATACUT command. If AT+DATACUT command is configured, AT+MBFUN will be ignore.
--)))
++So totally there will be 3 uplinks for this sampling, each uplink includes 6 bytes DATA
--(((
--
--)))
++DATA1=RETURN1 Valid Value = (% style="background-color:green; color:white" %)20 20 0a 33 90 41
--(((
--**Example:**
--)))
++DATA2=1^^st^^ ~~ 6^^th^^ byte of Valid value of RETURN10=(% style="background-color:green; color:white" %) 02 aa 05 81 0a 20
--* (((
--AT+MBFUN=1 and AT+DATACUT1/AT+DATACUT2  are not configure (0,0,0). So RS485-LN.
--)))
--* (((
--AT+COMMAND1= 01 03 00 10 00 08,1      ~-~-> read slave address 01 , function code 03, start address 00 01, quantity of registers 00 08.
--)))
--* (((
--AT+COMMAND2= 01 02 00 40 00 10,1      ~-~-> read slave address 01 , function code 02, start address 00 40, quantity of inputs 00 10.
++DATA3=7^^th^^ ~~ 11^^th^^ bytes of Valid value of RETURN10 = (% style="background-color:green; color:white" %)20 20 20 2d 30
--
--)))
++Below are the uplink payloads:
--(% aria-label="image-20220602165351-6.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602165351-6.png||data-widget="image"]]
++[[image:1653270130359-810.png]]
--(% title="Click and drag to resize" %)
--(% aria-label="image-20220602165351-7.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602165351-7.png||data-widget="image"]](% title="Click and drag to resize" %)
++(% style="color:red" %)**Notice: the Max bytes is according to the max support bytes in different Frequency Bands for lowest SF. As below:**
++   ~* For AU915/AS923 bands, if UplinkDwell time=0, max 51 bytes for each uplink ( so 51 -5 = 46 max valid date)
++   * For AU915/AS923 bands, if UplinkDwell time=1, max 11 bytes for each uplink ( so 11 -5 = 6 max valid date).
--==== (% style="color:blue" %)**RS485 command timeout**(%%) ====
++   * For US915 band, max 11 bytes for each uplink ( so 11 -5 = 6 max valid date).
++   ~* For all other bands: max 51 bytes for each uplink  ( so 51 -5 = 46 max valid date).
--(((
--Some Modbus device has slow action to send replies. This command is used to configure the RS485-LN to use longer time to wait for their action.
--)))
++=== 3.3.5 Uplink on demand ===
--(((
--Default value: 0, range:  0 ~~ 65 seconds
--)))
++Except uplink periodically, RS485-BL is able to uplink on demand. The server sends downlink command to RS485-BL and RS485 will uplink data base on the command.
--(((
--* (% style="color:#037691" %)** AT Command:**
++Downlink control command:
--(% style="color:#4472c4" %)** AT+CMDDLaa=hex(bb cc)*1000**
--)))
++[[0x08 command>>path:#downlink_08]]: Poll an uplink with current command set in RS485-BL.
--(((
--
++[[0xA8 command>>path:#downlink_A8]]: Send a command to RS485-BL and uplink the output from sensors.
--**Example:**
--)))
--(((
--(% style="color:#4472c4" %)** AT+CMDDL1=1000** (%%)to send the open time to 1000ms
--)))
--(((
--
--)))
++1.
++11.
++111. Uplink on Interrupt
--* (((
--(% style="color:#037691" %)** Downlink Payload:**
--)))
++Put the interrupt sensor between 3.3v_out and GPIO ext.[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
--(((
--(% style="color:#4472c4" %)** 0x AA aa bb cc**(%%) Same as: AT+CMDDLaa=hex (bb cc)
--)))
++AT+INTMOD=0  Disable Interrupt
--(((
--
++AT+INTMOD=1  Interrupt trigger by rising or falling edge.
--**Example:**
--)))
++AT+INTMOD=2  Interrupt trigger by falling edge. ( Default Value)
--(((
--**0xAA 01 03 E8**    ~-~-> Same as  **AT+CMDDL1=1000 ms**
--)))
++AT+INTMOD=3  Interrupt trigger by rising edge.
++1.
++11. Uplink Payload
--==== (% style="color:blue" %)**Uplink payload mode**(%%) ====
++|**Size(bytes)**|**2**|**1**|**Length depends on the return from the commands**
++|Value|(((
++Battery(mV)
++&
--(((
--Define to use one uplink or multiple uplinks for the sampling.
--)))
++Interrupt _Flag
++)))|(((
++PAYLOAD_VER
--(((
--The use of this command please see: [[Compose Uplink payload>>||anchor="H3.3.4Composetheuplinkpayload"]]
--
--)))
++)))|If the valid payload is too long and exceed the maximum support payload length in server, server will show payload not provided in the LoRaWAN server.
--(((
--* (% style="color:#037691" %)** AT Command:**
++Below is the decoder for the first 3 bytes. The rest bytes are dynamic depends on different RS485 sensors.
--(% style="color:#4472c4" %)** AT+DATAUP=0**
--(% style="color:#4472c4" %)** AT+DATAUP=1**
++function Decoder(bytes, port) {
--
--)))
++~/~/Payload Formats of RS485-BL Deceive
--(% style="color:#4472c4" %)** 0xAD 01 00 00 14** (%%)  **~-~->** Same as AT+DATAUP=1，20000   ~/~/  (00 00 14 is 20 seconds)
++return {
--Each uplink is sent to the server at 20-second intervals when segmented.
++    ~/~/Battery,units:V
++    BatV:((bytes[0]<<8 | bytes[1])&0x7fff)/1000,
--* (((
--(% style="color:#037691" %)** Downlink Payload:**
--)))
++    ~/~/GPIO_EXTI
--(% style="color:#4472c4" %)** 0xAD 00** (%%)  **~-~->** Same as AT+DATAUP=0
++    EXTI_Trigger:(bytes[0] & 0x80)? "TRUE":"FALSE",
--(% style="color:#4472c4" %)** 0xAD 01**  (%%) **~-~->** Same as AT+DATAUP=1  ~/~/Each uplink is sent to the server one after the other as it is segmented.
++    ~/~/payload of version
++    Pay_ver:bytes[2],
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
++    };
--(% style="color:#4472c4" %)** AT+DATAUP=1,Timeout**
++  }
--* (((
--(% style="color:#037691" %)** Downlink Payload:**
--)))
--(% style="color:#4472c4" %)** 0xAD 01 00 00 14** (%%)  **~-~->** Same as AT+DATAUP=1，20000  ~/~/  (00 00 14 is 20 seconds)
--Each uplink is sent to the server at 20-second intervals when segmented.
--==== (% style="color:blue" %)**Manually trigger an Uplink**(%%) ====
++TTN V3 uplink screen shot.
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
--(((
--Ask device to send an uplink immediately.
--)))
++1.
++11. Configure RS485-BL via AT or Downlink
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
++User can configure RS485-BL via [[AT Commands >>path:#_Using_the_AT]]or LoRaWAN Downlink Commands
--(((
--No AT Command for this, user can press the [[ACT button>>||anchor="H3.7Buttons"]] for 1 second for the same.
--)))
++There are two kinds of Commands:
--(((
--
--)))
++* **Common Commands**: They should be available for each sensor, such as: change uplink interval, reset device. For firmware v1.3, user can find what common commands it supports: http:~/~/wiki.dragino.com/index.php?title=End_Device_AT_Commands_and_Downlink_Commands
--* (((
--(% style="color:#037691" %)** Downlink Payload:**
--)))
++* **Sensor Related Commands**: These commands are special designed for RS485-BL.  User can see these commands below:
--(((
--(% style="color:#4472c4" %)** 0x08 FF**(%%), RS485-LN will immediately send an uplink.
--)))
++1.
++11.
++111. Common Commands:
++They should be available for each of Dragino Sensors, such as: change uplink interval, reset device. For firmware v1.3, user can find what common commands it supports: [[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_AT_Commands_and_Downlink_Commands>>url:http://wiki.dragino.com/index.php?title=End_Device_AT_Commands_and_Downlink_Commands]]
--==== (% style="color:blue" %)**Clear RS485 Command**(%%) ====
++1.
++11.
++111. Sensor related commands:
++==== Choose Device Type (RS485 or TTL) ====
--(((
--The AT+COMMANDx and AT+DATACUTx settings are stored in special location, user can use below command to clear them.
++RS485-BL can connect to either RS485 sensors or TTL sensor. User need to specify what type of sensor need to connect.
--
--)))
++* AT Command
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
++**AT+MOD=1** ~/~/ Set to support RS485-MODBUS type sensors. User can connect multiply RS485 , Modbus sensors to the A / B pins.
--(((
--(% style="color:#4472c4" %)** AT+CMDEAR=mm,nn** (%%)  mm: start position of erase ,nn: stop position of erase
--)))
++**AT+MOD=2** ~/~/ Set to support TTL Level sensors, User can connect one TTL Sensor to the TXD/RXD/GND pins.
--(((
--
--Etc. AT+CMDEAR=1,10 means erase AT+COMMAND1/AT+DATACUT1 to AT+COMMAND10/AT+DATACUT10
--)))
++* Downlink Payload
--(((
--Example screen shot after clear all RS485 commands.
--)))
++**0A aa**     à same as AT+MOD=aa
--(((
--
--)))
--(((
--The uplink screen shot is:
--)))
--(% aria-label="1654160691922-496.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654160691922-496.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++==== [[RS485 Debug Command>>path:#downlink_A8]] (AT+CFGDEV) ====
++This command is used to configure the RS485 or TTL sensors; they won’t be used during sampling.
--* (((
--(% style="color:#037691" %)** Downlink Payload:**
--)))
++* AT Command
--(((
--(% style="color:#4472c4" %)** 0x09 aa bb** (%%) same as AT+CMDEAR=aa,bb
--)))
++AT+CFGDEV=xx xx xx xx xx xx xx xx xx xx xx xx,m
++m: 0: no CRC; 1: add CRC-16/MODBUS in the end of this command.
--==== (% style="color:blue" %)**Set Serial Communication Parameters**(%%) ====
++* Downlink Payload
--(((
--Set the Rs485 serial communication parameters:
--)))
++Format: A8 MM NN XX XX XX XX YY
--(((
--(% style="color:#037691" %)**AT Command:**
--)))
++Where:
--(((
--* Set Baud Rate
--)))
++* MM: 1: add CRC-16/MODBUS ; 0: no CRC
++* NN: The length of RS485 command
++* XX XX XX XX: RS485 command total NN bytes
++* YY: How many bytes will be uplink from the return of this RS485 command, if YY=0, RS485-BL will execute the downlink command without uplink; if YY>0, RS485-BL will uplink total YY bytes from the output of this RS485 command
--(% style="color:#4472c4" %)**        AT+BAUDR=9600** (%%)   ~/~/  Options: (200~~115200)  When using low baud rate or receiving multiple bytes, you need to use AT+CMDDL to increase the receive timeout (the default receive timeout is 400ms), otherwise data will be lost
++**Example 1:**
++To connect a Modbus Alarm with below commands.
--(((
--* Set UART Parity
--)))
++* The command to active alarm is: 0A 05 00 04 00 01 4C B0. Where 0A 05 00 04 00 01 is the Modbus command to read the register 00 40 where stored the DI status. The 4C B0 is the CRC-16/MODBUS which calculate manually.
--(% style="color:#4472c4" %)**       AT+PARITY=0** (%%)   ~/~/  Option: 0: no parity, 1: odd parity, 2: even parity
++* The command to deactivate alarm is: 0A 05 00 04 00 00 8D 70. Where 0A 05 00 04 00 00 is the Modbus command to read the register 00 40 where stored the DI status. The 8D 70 is the CRC-16/MODBUS which calculate manually.
++So if user want to use downlink command to control to RS485 Alarm, he can use:
--(((
--* Set STOPBIT
--)))
++**A8 01 06 0A 05 00 04 00 01 00**: to activate the RS485 Alarm
--(% style="color:#4472c4" %)**        AT+STOPBIT=0** (%%)   ~/~/  Option: 0 for 1bit; 1 for 1.5 bit ; 2 for 2 bits
++**A8 01 06 0A 05 00 04 00 00 00**: to deactivate the RS485 Alarm
++A8 is type code and 01 means add CRC-16/MODBUS at the end, the 3^^rd^^ byte is 06, means the next 6 bytes are the command to be sent to the RS485 network, the final byte 00 means this command don’t need to acquire output.
--(((
--(% style="color:#037691" %)**Downlink Payload:**
--)))
--(((
--(% style="color:#4472c4" %)**     A7 01 aa bb**:   (%%)  Same  AT+BAUDR=hex(aa bb)*100
--)))
++**Example 2:**
--(((
--**Example:**
--)))
++Check TTL Sensor return:
--* (((
--A7 01 00 60     same as AT+BAUDR=9600
--)))
--* (((
--A7 01 04 80     same as AT+BAUDR=115200
--)))
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
--(((
--* A7 02 aa:    Same as  AT+PARITY=aa  (aa value: 00 , 01 or 02)
--)))
--(((
--* A7 03 aa:    Same as  AT+STOPBIT=aa  (aa value: 00 , 01 or 02)
--)))
++==== Set Payload version ====
++This is the first byte of the uplink payload. RS485-BL can connect to different sensors. User can set the PAYVER field to tell server how to decode the current payload.
--==== (% style="color:blue" %)**Configure Databit (Since Version 1.4.0)**(%%) ====
++* AT Command:
++AT+PAYVER: Set PAYVER field = 1
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
--(% style="color:#4472c4" %)** AT+DATABIT=7    **(%%)~/~/ Set the data bits to 7
++* Downlink Payload:
--(% style="color:#4472c4" %)** AT+DATABIT=8    **(%%)~/~/ Set the data bits to 8
++0xAE 01   à Set PAYVER field =  0x01
--* (((
--(% style="color:#037691" %)**Downlink Payload:**
--)))
++0xAE 0F   à Set PAYVER field =  0x0F
--(% style="color:#4472c4" %)** A7 04 07**(%%): Same as  AT+DATABIT=7
--(% style="color:#4472c4" %)** A7 04 08**(%%): Same as  AT+DATABIT=8
++==== Set RS485 Sampling Commands ====
++AT+COMMANDx, AT+DATACUTx and AT+SEARCHx
++These three commands are used to configure how the RS485-BL polling data from Modbus device. Detail of usage please see : [[polling RS485 device>>path:#polling_485]].
--==== (% style="color:blue" %)**Encrypted payload(Since Version 1.4.0)**(%%) ====
--(((
--
--)))
++* AT Command:
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
++AT+COMMANDx: Configure RS485 read command to sensor.
--(% style="color:#4472c4" %)** AT+DECRYPT=1  ** (%%)  ~/~/ The payload is uploaded without encryption
++AT+DATACUTx: Configure how to handle return from RS485 devices.
--(% style="color:#4472c4" %)** AT+DECRYPT=0  ** (%%)  ~/~/ Encrypt when uploading payload (default)
++AT+SEARCHx: Configure search command
++* Downlink Payload:
--==== (% style="color:blue" %)**Get sensor value(Since Version 1.4.0)**(%%) ====
++0xAF downlink command can be used to set AT+COMMANDx or AT+DATACUTx.
++Note: if user use AT+COMMANDx to add a new command, he also need to send AT+DATACUTx downlink.
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
++Format: AF MM NN LL XX XX XX XX YY
--(% style="color:#4472c4" %)** AT+GETSENSORVALUE=0  **(%%)  ~/~/ The serial port gets the reading of the current sensor
++Where:
--(% style="color:#4472c4" %)** AT+GETSENSORVALUE=1  **(%%)  ~/~/ The serial port gets the current sensor reading and uploads it.
++* MM: the ATCOMMAND or AT+DATACUT to be set. Value from 01 ~~ 0F,
++* NN: 0: no CRC; 1: add CRC-16/MODBUS ; 2: set the AT+DATACUT value.
++* LL: The length of AT+COMMAND or AT+DATACUT command
++* XX XX XX XX: AT+COMMAND or AT+DATACUT command
++* YY: If YY=0, RS485-BL will execute the downlink command without uplink; if YY=1, RS485-BL will execute an uplink after got this command.
++Example:
++**AF 03 01 06 0A 05 00 04 00 01 00**: Same as AT+COMMAND3=0A 05 00 04 00 01,1
--==== (% style="color:blue" %)**Resets the downlink packet count(Since Version 1.4.0)**(%%) ====
++**AF 03 02 06 10 01 05 06 09 0A 00**: Same as AT+DATACUT3=**16**,**1**,**5+6+9+10**
++**AF 03 02 06 0B 02 05 07 08 0A 00**: Same as AT+DATACUT3=**11**,**2**,**5~~7+8~~10**
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
--(% style="color:#4472c4" %)** AT+DISFCNTCHECK=0  **(%%) ~/~/  When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node will no longer receive downlink packets (default)
++0xAB downlink command can be used for set AT+SEARCHx
--(% style="color:#4472c4" %)** AT+DISFCNTCHECK=1  **(%%) ~/~/  When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node resets the downlink packet count and keeps it consistent with the server downlink packet count.
++Example: **AB aa 01 03 xx xx xx** (03 here means there are total 3 bytes after 03) So
++* AB aa 01 03 xx xx xx  same as AT+SEARCHaa=1,xx xx xx
++* AB aa 02 03 xx xx xx 02 yy yy(03 means there are 3 bytes after 03, they are xx xx xx;02 means there are 2 bytes after 02, they are yy yy) so the commands
++**AB aa 02 03 xx xx xx 02 yy yy**  same as **AT+SEARCHaa=2,xx xx xx+yy yy**
--==== (% style="color:blue" %)**When the limit bytes are exceeded, upload in batches(Since Version 1.4.0)**(%%) ====
++==== Fast command to handle MODBUS device ====
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
++AT+MBFUN is valid since v1.3 firmware version. The command is for fast configure to read Modbus devices. It is only valid for the devices which follow the [[MODBUS-RTU protocol>>url:https://www.modbustools.com/modbus.html]].
-- (% style="color:#4472c4" %)** AT+DISMACANS=0**  (%%)   ~/~/  When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of 11 bytes (DR0 of US915, DR2 of AS923, DR2 of AU195), the node will send a packet with a payload of 00 and a port of 4. (default)
++This command is valid since v1.3 firmware version
-- (% style="color:#4472c4" %)** AT+DISMACANS=1**   (%%)   ~/~/  When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of the DR, the node will ignore the MACANS and not reply, and only upload the payload part.
++AT+MBFUN has only two value:
--* (((
--(% style="color:#037691" %)** Downlink Payload:**
--)))
++* AT+MBFUN=1: Enable Modbus reading. And get response base on the MODBUS return
--(% style="color:#4472c4" %)** 0x21 00 01 **  (%%)       ~/~/ Set  the DISMACANS=1
++AT+MBFUN=1, device can auto read the Modbus function code: 01, 02, 03 or 04. AT+MBFUN has lower priority vs AT+DATACUT command. If AT+DATACUT command is configured, AT+MBFUN will be ignore.
++* AT+MBFUN=0: Disable Modbus fast reading.
++Example:
--==== (% style="color:blue" %)**Copy downlink to uplink (Since Version 1.4.0)**(%%) ====
++* AT+MBFUN=1 and AT+DATACUT1/AT+DATACUT2 are not configure (0,0,0).
++* AT+COMMAND1= 01 03 00 10 00 08,1 ~-~-> read slave address 01 , function code 03, start address 00 01, quantity of registers 00 08.
++* AT+COMMAND2= 01 02 00 40 00 10,1 ~-~-> read slave address 01 , function code 02, start address 00 40, quantity of inputs 00 10.
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
--(% style="color:#4472c4" %)** AT+RPL=5**  (%%)   ~/~/ After receiving the package from the server, it will immediately upload the content of the package to the server, the port number is 100.
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
--Example：**aa xx xx xx xx**         ~/~/ aa indicates whether the configuration has changed, 00 is yes, 01 is no; xx xx xx xx are the bytes sent.
++* Downlink Commands:
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173747-6.png?width=1124&height=165&rev=1.1||alt="image-20220823173747-6.png"]]
++A9 aa -à Same as AT+MBFUN=aa
--For example, sending 11 22 33 44 55 66 77 will return invalid configuration 00 11 22 33 44 55 66 77.
++==== RS485 command timeout ====
++Some Modbus device has slow action to send replies. This command is used to configure the RS485-BL to use longer time to wait for their action.
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173833-7.png?width=1124&height=149&rev=1.1||alt="image-20220823173833-7.png"]]
++Default value: 0, range:  0 ~~ 5 seconds
--For example, if 01 00 02 58 is issued, a valid configuration of 01 01 00 02 58 will be returned.
++* AT Command:
++AT+CMDDLaa=hex(bb cc)
--==== (% style="color:blue" %)**Query version number and frequency band 、TDC(Since Version 1.4.0)**(%%) ====
++Example:
++**AT+CMDDL1=1000** to send the open time to 1000ms
--(((
--* (% style="color:#037691" %)**Downlink Payload:**
--(% style="color:#4472c4" %)** 26 01  ** (%%) ~/~/   Downlink 26 01 can query device upload frequency, frequency band, software version number, TDC time.
--)))
++* Downlink Payload:
++0x AA aa bb cc
--Example：
++Same as: AT+CMDDLaa=hex(bb cc)
++   Example:
--[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173929-8.png?width=1205&height=76&rev=1.1||alt="image-20220823173929-8.png"]]
++   0xAA 01 03 E8  à Same as **AT+CMDDL1=1000 ms**
++==== [[Uplink>>path:#downlink_A8]] payload mode ====
--==== (% style="color:blue" %)** Monitor RS485 communication of other devices(Since Version 1.4.0)**(%%) ====
++Define to use one uplink or multiple uplinks for the sampling.
++The use of this command please see: [[Compose Uplink payload>>path:#DataUP]]
--* (((
--(% style="color:#037691" %)** AT Command:**
--)))
++* AT Command:
--(% style="color:#4472c4" %)**AT+RXMODE=1,10**    (%%)     ~/~/ When the RS485-LN receives more than 10 bytes from the RS485, it immediately sends the uplink of the received data.
++AT+DATAUP=0
--(% style="color:#4472c4" %)**AT+RXMODE=2,500    ** (%%) ~/~/  RS485-LN uploads data as uplink from the first byte received by RS485 to the data received within 500ms after that.
++AT+DATAUP=1
--(% style="color:#4472c4" %)**AT+RXMODE=0,0  **    (%%)    ~/~/  Disable this mode (default)
++* Downlink Payload:
--* (((
--(% style="color:#037691" %)**Downlink Payload:**
--)))
++0xAD 00   à Same as AT+DATAUP=0
--(% style="color:#4472c4" %)** A6 aa bb bb               ** (%%)  ~/~/ same as AT+RXMODE=aa,bb
++0xAD 01   à Same as AT+DATAUP=1
--[[image:image-20220824144240-1.png]]
++==== Manually trigger an Uplink ====
--== 3.6 Listening mode for RS485 network ==
++Ask device to send an uplink immediately.
++* Downlink Payload:
--(((
--This feature support since firmware v1.4
--)))
++0x08 FF, RS485-BL will immediately send an uplink.
--(((
--RS485-LN supports listening mode, it can listen the RS485 network packets and send them via LoRaWAN uplink. Below is the structure. The blue arrow shows the RS485 network packets to RS485-LN.
--
--)))
++==== Clear RS485 Command ====
--(% aria-label="image-20220602171200-8.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602171200-8.png||data-widget="image" height="567" width="1007"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]
++The AT+COMMANDx and AT+DATACUTx settings are stored in special location, user can use below command to clear them.
--(% title="Click and drag to resize" %)
--(((
--To enable the listening mode, use can run the command (% style="color:#4472c4" %)** AT+RXMODE**.
--)))
++* AT Command:
++**AT+CMDEAR=mm,nn**   mm: start position of erase ,nn: stop position of erase
++Etc. AT+CMDEAR=1,10 means erase AT+COMMAND1/AT+DATACUT1 to AT+COMMAND10/AT+DATACUT10
--(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 156px; background-color:#D9E2F3;color:#0070C0" %)(((
--**Command example**
--)))|=(% style="width: 355px; background-color:#D9E2F3;color:#0070C0" %)(((
--**Function**
--)))
--|(% style="width:156px" %)(((
--AT+RXMODE=1,10
--)))|(% style="width:352px" %)(((
--Enable listening mode 1, if RS485-LN has received more than 10 RS485 commands from the network. RS485-LN will send these commands via LoRaWAN uplinks.
--)))
--|(% style="width:156px" %)(((
--AT+RXMODE=2,500
--)))|(% style="width:352px" %)(((
--Enable listening mode 2, RS485-LN will capture and send a 500ms content once from the first detect of character. Max value is 65535 ms
--)))
--|(% style="width:156px" %)(((
--AT+RXMODE=0,0
--)))|(% style="width:352px" %)(((
--Disable listening mode. This is the default settings.
--)))
--|(% style="width:156px" %)(((
--
--)))|(% style="width:352px" %)(((
--A6 aa bb cc  same as AT+RXMODE=aa,(bb<<8 | cc)
--)))
++Example screen shot after clear all RS485 commands.
--(((
--
--(% style="color:#037691" %)**Downlink Command:**
--)))
--(((
--(% style="color:#4472c4" %)** 0xA6 aa bb cc **(%%) same as AT+RXMODE=aa,(bb<<8 | cc)
--)))
++The uplink screen shot is:
--(((
--
--)))
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
--(((
--**Example**:
--)))
--(((
--The RS485-LN is set to AT+RXMODE=2,1000
--)))
++* Downlink Payload:
--(((
--There is a two Modbus commands in the RS485 network as below:
--)))
++0x09 aa bb  same as AT+CMDEAR=aa,bb
--(((
--The Modbus master send a command: (% style="background-color:#ffc000" %)**01 03 00 00 00 02 c4 0b**
--)))
--(((
--And Modbus slave reply with: (% style="background-color:green" %)**01 03 04 00 00 00 00 fa 33**
--)))
++==== Set Serial Communication Parameters ====
--(((
--RS485-LN will capture both and send the uplink: (% style="background-color:#ffc000" %)**01 03 00 00 00 02 c4 0b  **(% style="background-color:green" %)**01 03 04 00 00 00 00 fa 33**
++Set the Rs485 serial communication parameters:
--
--)))
++* AT Command:
--(((
--(% aria-label="image-20220602171200-9.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602171200-9.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
--)))
++Set Baud Rate:
++AT+BAUDR=9600    ~/~/ Options: (1200,2400,4800,14400,19200,115200)
--(((
--(% style="color:red" %)**Notice: Listening mode can work with the default polling mode of RS485-LN. When RS485-LN is in to send the RS485 commands (from AT+COMMANDx), the listening mode will be interrupt for a while.**
--)))
++Set UART parity
++AT+PARITY=0    ~/~/ Option: 0: no parity, 1: odd parity, 2: even parity
--== 3.7 Buttons ==
++Set STOPBIT
--(% border="1.5" cellspacing="4" style="background-color:#ffffcc; width:430px" %)
--|=(% style="width: 50px;" %)**Button**|=(% style="width: 380px;" %)**Feature**
--|(% style="width:50px" %)**ACT**|(% style="width:361px" %)If RS485 joined in network, press this button for more than 1 second, RS485 will upload a packet, and the SYS LED will give a (% style="color:blue" %)**Blue blink**
--|(% style="width:50px" %)**RST**|(% style="width:361px" %)Reboot RS485
--|(% style="width:50px" %)**PRO**|(% style="width:361px" %)Use for upload image, see [[How to Update Image>>||anchor="H6.1Howtoupgradetheimage3F"]]
++AT+STOPBIT=0    ~/~/ Option: 0 for 1bit; 1 for 1.5 bit ; 2 for 2 bits
--== 3.8 LEDs ==
++* Downlink Payload:
--(% border="1.5" cellspacing="4" style="background-color:#ffffcc; width:430px" %)
--|=(% style="width: 50px;" %)**LEDs**|=(% style="width: 380px;" %)**Feature**
--|**PWR**|Always on if there is power
--|**SYS**|After device is powered on, the SYS will (% style="color:green" %)**fast blink in GREEN**(%%) for 5 times, means RS485-LN start to join LoRaWAN network. If join success, SYS will be (% style="color:green" %)**on GREEN for 5 seconds** (%%)**. **SYS will (% style="color:green" %)**blink Blue**(%%) on every upload and (% style="color:green" %)**blink Green**(%%) once receive a downlink message.
++A7 01 aa bb: Same  AT+BAUDR=hex(aa bb)*100
--= 4. Case Study =
++Example:
++* A7 01 00 60   same as AT+BAUDR=9600
++* A7 01 04 80     same as AT+BAUDR=115200
--User can check this URL for some case studies: [[APP RS485 COMMUNICATE WITH SENSORS>>doc:Main.Application Note \: Communicate with Different Sensors ----- RS485-LN  RS485-BL.WebHome]]
++A7 02 aa: Same as  AT+PARITY=aa  (aa value: 00 , 01 or 02)
++A7 03 aa: Same as  AT+STOPBIT=aa  (aa value: 00 , 01 or 02)
--= 5. Use AT Command =
--== 5.1 Access AT Command ==
++==== Control output power duration ====
++User can set the output power duration before each sampling.
--(((
--RS485-LN supports AT Command set. User can use a USB to TTL adapter plus the 3.5mm Program Cable to connect to RS485-LN to use AT command, as below.
++* AT Command:
--
--)))
++Example:
--(% aria-label="1654162355560-817.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162355560-817.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++AT+3V3T=1000 ~/~/ 3V3 output power will open 1s before each sampling.
++AT+5VT=1000 ~/~/ +5V output power will open 1s before each sampling.
--(((
--In PC, User needs to set (% style="color:blue" %)**serial tool**(%%)(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console of RS485-LN. The default password is 123456. Below is the output for reference:
++* LoRaWAN Downlink Command:
--
--)))
++07 01 aa bb  Same as AT+5VT=(aa bb)
--(% aria-label="1654162368066-342.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162368066-342.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++07 02 aa bb  Same as AT+3V3T=(aa bb)
--(((
--More detail AT Command manual can be found at [[AT Command Manual>>https://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/]]
--)))
--== 5.2 Common AT Command Sequence ==
++1.
++11. Buttons
--=== 5.2.1 Multi-channel ABP mode (Use with SX1301/LG308) ===
++|**Button**|**Feature**
++|**RST**|Reboot RS485-BL
++1.
++11. +3V3 Output
--If device has not joined network yet:
++RS485-BL has a Controllable +3V3 output, user can use this output to power external sensor.
--* (% style="color:#037691" %)**AT+FDR**
--* (% style="color:#037691" %)**AT+NJM=0**
--* (% style="color:#037691" %)**ATZ**
++The +3V3 output will be valid for every sampling. RS485-BL will enable +3V3 output before all sampling and disable the +3V3 after all sampling.
--(((
--
--If device already joined network:
++The +3V3 output time can be controlled by AT Command.
--* (% style="color:#037691" %)**AT+NJM=0**
--* (% style="color:#037691" %)**ATZ**
--)))
++**AT+3V3T=1000**
++Means set +3v3 valid time to have 1000ms. So, the real +3v3 output will actually have 1000ms + sampling time for other sensors.
--=== 5.5.2 Single-channel ABP mode (Use with LG01/LG02) ===
++By default, the AT+3V3T=0. This is a special case, means the +3V3 output is always on at any time
--(% style="background-color:#dcdcdc" %)**AT+FDR** (%%)          Reset Parameters to Factory Default, Keys Reserve
++1.
++11. +5V Output
--(% style="background-color:#dcdcdc" %)**AT+NJM=0 **(%%)   Set to ABP mode
++RS485-BL has a Controllable +5V output, user can use this output to power external sensor.
--(% style="background-color:#dcdcdc" %)**AT+ADR=0** (%%)   Set the Adaptive Data Rate Off
++The +5V output will be valid for every sampling. RS485-BL will enable +5V output before all sampling and disable the +5v after all sampling.
--(% style="background-color:#dcdcdc" %)**AT+DR=5**   (%%)   Set Data Rate
--(% style="background-color:#dcdcdc" %)**AT+TDC=60000** (%%)                 Set transmit interval to 60 seconds
++The 5V output time can be controlled by AT Command.
--(% style="background-color:#dcdcdc" %)**AT+CHS=868400000**(%%)          Set transmit frequency to 868.4Mhz
++**AT+5VT=1000**
--(% style="background-color:#dcdcdc" %)**AT+RX2FQ=868400000** (%%)     Set RX2Frequency to 868.4Mhz (according to the result from server)
++Means set 5V valid time to have 1000ms. So, the real 5V output will actually have 1000ms + sampling time for other sensors.
--(% style="background-color:#dcdcdc" %)**AT+RX2DR=5**  (%%)                    Set RX2DR to match the downlink DR from server. see below
--(% style="background-color:#dcdcdc" %)**AT+DADDR=26** (%%)                  01 1A F1 Set Device Address to 26 01 1A F1, this ID can be found in the LoRa Server portal.
++By default, the AT+5VT=0. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
--(% style="background-color:#dcdcdc" %)**ATZ**       (%%)                                Reset MCU
--(% style="color:red" %)**Note:**
--(((
--(% style="color:red" %)1. Make sure the device is set to ABP mode in the IoT Server.
--2. Make sure the LG01/02 gateway RX frequency is exactly the same as AT+CHS setting.
--3. Make sure SF / bandwidth setting in LG01/LG02 match the settings of AT+DR. refer [[this link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/&file=LoRaWAN%201.0.3%20Regional%20Parameters.xlsx]] to see what DR means.
--4. The command AT+RX2FQ and AT+RX2DR is to let downlink work. to set the correct parameters, user can check the actually downlink parameters to be used. As below. Which shows the RX2FQ should use 868400000 and RX2DR should be 5
++1.
++11. LEDs
--
--)))
++|**LEDs**|**Feature**
++|**LED1**|Blink when device transmit a packet.
--(% aria-label="1654162478620-421.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162478620-421.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++1.
++11. Switch Jumper
++|**Switch Jumper**|**Feature**
++|**SW1**|(((
++ISP position: Upgrade firmware via UART
--= 6. FAQ =
--
--== 6.1 How to upgrade the image? ==
--
--
--(((
--The RS485-LN LoRaWAN Controller is shipped with a 3.5mm cable, the cable is used to upload image to RS485-LN to:
++Flash position: Configure device, check running status.
  )))
++|**SW2**|(((
++5V position: set to compatible with 5v I/O.
--* (((
--Support new features
++3.3v position: set to compatible with 3.3v I/O.,
  )))
--* (((
--For bug fix
--)))
--* (((
--Change LoRaWAN bands.
--)))
--(((
--Below shows the hardware connection for how to upload an image to RS485-LN:
--)))
+++3.3V: is always ON
--(% aria-label="1654162535040-878.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654162535040-878.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]]
+++5V: Only open before every sampling. The time is by default, it is AT+5VT=0.  Max open time. 5000 ms.
--(% title="Click and drag to resize" %)
++1. Case Study
--(((
--(% style="color:blue" %)**Step1**(%%)**:** Download [[flash loader>>url:https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/flasher-stm32.html]].
++User can check this URL for some case studies.
--
--)))
++[[http:~~/~~/wiki.dragino.com/index.php?title=APP_RS485_COMMUNICATE_WITH_SENSORS>>url:http://wiki.dragino.com/index.php?title=APP_RS485_COMMUNICATE_WITH_SENSORS]]
--(((
--(% style="color:blue" %)**Step2**(%%)**:** Download the [[LT Image files>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AACP33wo_ZQLsxW2MJ70oUoba/RS485-LN/Firmware?dl=0&subfolder_nav_tracking=1]].
--
--)))
--(((
--(% style="color:blue" %)**Step3**(%%)**: **Open flashloader; choose the correct COM port to update.
--
--)))
++1. Use AT Command
++11. Access AT Command
--(((
--(((
--(((
--(% style="color:blue" %) Hold down the PRO button and then momentarily press the RST reset button and the SYS led will change from OFF to ON, While SYS LED is RED ON, it means the RS485-LN is ready to be program.
--)))
--)))
--)))
++RS485-BL supports AT Command set. User can use a USB to TTL adapter plus the 3.5mm Program Cable to connect to RS485-BL to use AT command, as below.
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
--(% aria-label="image-20220602175818-12.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175818-12.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to **9600** to access to access serial console of RS485-BL. The default password is 123456. Below is the output for reference:
--(% aria-label="image-20220602175848-13.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175848-13.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
--(% aria-label="image-20220602175912-14.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175912-14.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++More detail AT Command manual can be found at [[AT Command Manual>>path:#AT_COMMAND]]
--(% style="color:red" %)**Notice**: **In case user has lost the program cable. User can hand made one from a 3.5mm cable. The pin mapping is:**
--(% aria-label="image-20220602175638-10.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220602175638-10.png||data-widget="image"]](% style="background-image:url(http://wiki.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)
++1.
++11. Common AT Command Sequence
++111. Multi-channel ABP mode (Use with SX1301/LG308)
--== 6.2 How to change the LoRa Frequency Bands/Region? ==
++If device has not joined network yet:
++AT+FDR
--User can follow the introduction for [[how to upgrade image>>||anchor="H6.1Howtoupgradetheimage3F"]]. When download the images, choose the required image file for download.
++AT+NJM=0
++ATZ
--== 6.3 How many RS485-Slave can RS485-LN connects? ==
++If device already joined network:
--The RS485-LN can support max 32 RS485 devices. Each uplink command of RS485-LN can support max 16 different RS485 command. So RS485-LN can support max 16 RS485 devices pre-program in the device for uplink. For other devices no pre-program, user can use the [[downlink message (type code 0xA8) to poll their info>>||anchor="H3.3.3Configurereadcommandsforeachsampling"]].
++AT+NJM=0
++ATZ
--== 6.4 Compatible question to ChirpStack and TTI LoRaWAN server ? ==
++1.
++11.
++111. Single-channel ABP mode (Use with LG01/LG02)
++AT+FDR   Reset Parameters to Factory Default, Keys Reserve
--When user need to use with ChirpStack or TTI. Please set AT+RPL=4.
++AT+NJM=0 Set to ABP mode
--Detail info check this link: [[Set Packet Receiving Response Level>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H7.23SetPacketReceivingResponseLevel"]]
++AT+ADR=0 Set the Adaptive Data Rate Off
++AT+DR=5  Set Data Rate
--== 6.5 Can i use point to point communication for RS485-LN? ==
++AT+TDC=60000  Set transmit interval to 60 seconds
++AT+CHS=868400000 Set transmit frequency to 868.4Mhz
--Yes, please updating point-to-point [[firmware>>https://www.dropbox.com/sh/g99v0fxcltn9r1y/AACP33wo_ZQLsxW2MJ70oUoba/RS485-LN/Firmware?dl=0&subfolder_nav_tracking=1]]，then refer [[Point to Point Communication for RS485-LN>>Point to Point Communication for RS485-LN]].
++AT+RX2FQ=868400000 Set RX2Frequency to 868.4Mhz (according to the result from server)
++AT+RX2DR=5  Set RX2DR to match the downlink DR from server. see below
--== 6.6 How to Use RS485-LN  to connect to RS232 devices? ==
++AT+DADDR=26 01 1A F1 Set Device Address to 26 01 1A F1, this ID can be found in the LoRa Server portal.
++ATZ          Reset MCU
--[[Use RS485-BL or RS485-LN to connect to RS232 devices. - DRAGINO>>url:http://8.211.40.43:8080/xwiki/bin/view/Main/RS485%20to%20RS232/]]
++**Note:**
++1. Make sure the device is set to ABP mode in the IoT Server.
++1. Make sure the LG01/02 gateway RX frequency is exactly the same as AT+CHS setting.
++1. Make sure SF / bandwidth setting in LG01/LG02 match the settings of AT+DR. refer [[this link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/&file=LoRaWAN%201.0.3%20Regional%20Parameters.xlsx]] to see what DR means.
++1. The command AT+RX2FQ and AT+RX2DR is to let downlink work. to set the correct parameters, user can check the actually downlink parameters to be used. As below. Which shows the RX2FQ should use 868400000 and RX2DR should be 5
--== 6.7 How to judge whether there is a problem with the set COMMAND ==
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
--=== 6.7.1 Introduce: ===
++1. FAQ
++11. How to upgrade the image?
--Users can use below the structure to fast debug the communication between RS485BL and RS485-LN. The principle is to put the PC in the RS485 network and sniff the packet between Modbus MTU and RS485-BL/LN.  We can use this way to:
++The RS485-BL LoRaWAN Controller is shipped with a 3.5mm cable, the cable is used to upload image to RS485-BL to:
--1. Test if Modbus-MTU works with PC commands.
--1. Check if RS485-LN sent the expected command to Mobus-MTU
--1. Check if Modbus-MTU return back the expected result to RS485-LN.
--1. If both b) and c) has issue, we can compare PC’s output and RS485-LN output.
++* Support new features
++* For bug fix
++* Change LoRaWAN bands.
--[[image:image-20221130104310-1.png||height="380" width="680"]]
++Below shows the hardware connection for how to upload an image to RS485-BL:
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
--Example Connection:
++**Step1:** Download [[flash loader>>url:https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/flasher-stm32.html]].
--[[image:image-20221130104310-2.png]]
++**Step2**: Download the [[LT Image files>>url:http://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/image/]].
++**Step3: **Open flashloader; choose the correct COM port to update.
--=== 6.7.2 Set up PC to monitor RS485 network With Serial tool ===
++|(((
++HOLD PRO then press the RST button, SYS will be ON, then click next
++)))
--(% style="color:red" %)**Note: Receive and send set to hex mode**
++|(((
++Board detected
++)))
--[[image:image-20221130104310-3.png||height="616" width="714"]]
++|(((
++
++)))
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]            [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.png]]
--=== 6.7.3 With ModRSsim2: ===
--(% style="color:blue" %)**(1) Select serial port MODBUS RS-232**
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image033.png]]           [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image034.png]]
--[[image:image-20221130104310-4.png||height="390" width="865"]]
++[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image035.png]]   [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image036.png]]
--(% style="color:blue" %)**(2) Click the serial port icon**
--[[image:image-20221130104310-5.png||height="392" width="870"]]
++1.
++11. How to change the LoRa Frequency Bands/Region?
++User can follow the introduction for [[how to upgrade image>>path:#upgrade_image]]. When download the images, choose the required image file for download.
--(% style="color:blue" %)**(3) After selecting the correct serial port and baud rate, click ok**
--[[image:image-20221130104310-6.png]]
++1.
++11. How many RS485-Slave can RS485-BL connects?
--(% style="color:blue" %)**(4) Click the comms.**
++The RS485-BL can support max 32 RS485 devices. Each uplink command of RS485-BL can support max 16 different RS485 command. So RS485-BL can support max 16 RS485 devices pre-program in the device for uplink. For other devices no pre-program, user can use the [[downlink message (type code 0xA8) to poll their info>>path:#downlink_A8]].
--[[image:image-20221130104310-7.png||height="376" width="835"]]
--(% class="wikigeneratedid" id="HRunRS485-LN2FBLcommandandmonitorifitiscorrect." %)
--**Run RS485-LN/BL command and monitor if it is correct.**
--=== 6.7.4 Example – Test the CFGDEV command ===
++1. Trouble Shooting
++11. Downlink doesn’t work, how to solve it?
++Please see this link for debug:
--RS485-LN sent below command:
++[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#LoRaWAN_Communication_Debug>>url:http://wiki.dragino.com/index.php?title=Main_Page#LoRaWAN_Communication_Debug]]
--(% style="color:blue" %)**AT+CFGDEV=01 03 00 20 00 01,1**(%%) to RS485 network, and PC is able to get this command and return commands from MTU to show in the serial tool.
--We can see the output from the Serial port tool to analyze. And check if they are expected result.
++1.
++11. Why I can’t join TTN V3 in US915 /AU915 bands?
--[[image:image-20221130104310-8.png||height="214" width="797"]]
++It might about the channels mapping. Please see for detail.
++[[http:~~/~~/wiki.dragino.com/index.php?title=LoRaWAN_Communication_Debug#Notice_of_US915.2FCN470.2FAU915_Frequency_band>>url:http://wiki.dragino.com/index.php?title=LoRaWAN_Communication_Debug#Notice_of_US915.2FCN470.2FAU915_Frequency_band]]
--We can also use (% style="color:blue" %)**ModRSsim2**(%%) to see the output.
--[[image:image-20221130104310-9.png||height="531" width="729"]]
++1. Order Info
--=== 6.7.5 Example – Test CMD command sets. ===
++**Part Number: RS485-BL-XXX**
++**XXX:**
--Run (% style="color:blue" %)**AT+SENSORVALUE=1**(%%) to test the CMD commands set in RS485-LN.
++* **EU433**: frequency bands EU433
++* **EU868**: frequency bands EU868
++* **KR920**: frequency bands KR920
++* **CN470**: frequency bands CN470
++* **AS923**: frequency bands AS923
++* **AU915**: frequency bands AU915
++* **US915**: frequency bands US915
++* **IN865**: frequency bands IN865
++* **RU864**: frequency bands RU864
++* **KZ865: **frequency bands KZ865
++1. Packing Info
--(% style="color:blue" %)**Serial port tool:**
--
--[[image:image-20221130104310-10.png||height="339" width="844"]]
--
--
--(% style="color:blue" %)**ModRSsim2:**
--
--[[image:image-20221130104310-11.png||height="281" width="962"]]
--
--
--=== 6.7.6 Test with PC ===
--
--
--If there is still have problem to set up correctly the commands between RS485-LN and MTU. User can test the correct RS485 command set in PC and compare with the RS485 command sent out via RS485-LN. as long as both commands are the same, the MTU should return correct result.
--
--
--Or User can send the working commands set in PC serial tool to Dragino Support to check what should be configured in RS485-LN.
--
--(% style="color:blue" %)**Connection method：**
--
--[[image:image-20221130104310-12.png]]
--
--
--(% style="color:blue" %)**Link situation:**
--
--[[image:image-20221130104310-13.png||height="458" width="486"]]
--
--
--[[image:image-20221130104310-14.png||height="371" width="823"]]
--
--
--== 6.8 Where to get the decoder for RS485-LN? ==
--
--
--The decoder for RS485-LN needs to be written by yourself. Because the sensor to which the user is connected is custom, the read device data bytes also need custom parsing, so there is no universal decoder. We can only provide [[templates>>https://github.com/dragino/dragino-end-node-decoder/tree/main/RS485-LN]] for decoders (no intermediate data parsing part involved)
--
--
--= 7. Trouble Shooting =
--
--== 7.1 Downlink doesn't work, how to solve it? ==
--
--
--Please see this link for debug: [[LoRaWAN Communication Debug>>doc:Main.LoRaWAN Communication Debug.WebHome]]
--
--
--== 7.2 Why I can't join TTN V3 in US915 /AU915 bands? ==
--
--
--It might about the channels mapping. Please see for detail: [[Notice of Frequency band>>doc:Main.LoRaWAN Communication Debug.WebHome||anchor="H2.NoticeofUS9152FCN4702FAU915Frequencyband"]]
--
--
--= 8. Order Info =
--
--
--(% style="color:blue" %)**Part Number: RS485-LN-XXX**
--
--(% style="color:blue" %)**XXX:**
--
--* (% style="color:red" %)**EU433**(%%):  frequency bands EU433
--* (% style="color:red" %)**EU868**(%%):  frequency bands EU868
--* (% style="color:red" %)**KR920**(%%):  frequency bands KR920
--* (% style="color:red" %)**CN470**(%%):  frequency bands CN470
--* (% style="color:red" %)**AS923**(%%):  frequency bands AS923
--* (% style="color:red" %)**AU915**(%%):  frequency bands AU915
--* (% style="color:red" %)**US915**(%%):  frequency bands US915
--* (% style="color:red" %)**IN865**(%%):   frequency bands IN865
--* (% style="color:red" %)**RU864**(%%):  frequency bands RU864
--* (% style="color:red" %)**KZ865**(%%):  frequency bands KZ865
--
--= 9. Packing Info =
--
--
  **Package Includes**:
--* RS485-LN x 1
++* RS485-BL x 1
  * Stick Antenna for LoRa RF part x 1
  * Program cable x 1
@@ -1785,67 +1785,9 @@
  * Package Size / pcs : 14.5 x 8 x 5 cm
  * Weight / pcs : 170g
--= 10. FCC Caution for RS485LN-US915 =
++1. Support
++* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
++* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
--(((
--Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
--)))
--
--(((
--This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
--)))
--
--(((
--
--)))
--
--(((
--(% style="color:red" %)**IMPORTANT NOTE:**
--)))
--
--(((
--(% style="color:red" %)**Note: **(%%)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--)))
--
--(((
--—Reorient or relocate the receiving antenna.
--)))
--
--(((
--—Increase the separation between the equipment and receiver.
--)))
--
--(((
--—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--)))
--
--(((
--—Consult the dealer or an experienced radio/TV technician for help.
--)))
--
--(((
--
--)))
--
--(((
--(% style="color:red" %)**FCC Radiation Exposure Statement:**
--)))
--
--(((
--This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
--)))
--
--
--= 11. Support =
--
--
--* (((
--Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
--)))
--* (((
--Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
--
--
--
--)))
++[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]

1654157178836-407.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-179.9 KB

Content

1654157342174-798.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-31.9 KB

Content

1654158783574-851.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-40.6 KB

Content

1654159460680-153.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-24.9 KB

Content

1654160691922-496.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-109.3 KB

Content

1654162355560-817.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-670.0 KB

Content

1654162368066-342.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-192.9 KB

Content

1654162478620-421.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-158.9 KB

Content

1654162535040-878.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-670.0 KB

Content

image-20220602153621-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-22.2 KB

Content

image-20220602153621-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-22.3 KB

Content

image-20220602155039-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-24.6 KB

Content

image-20220602163333-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-48.2 KB

Content

image-20220602165351-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-10.6 KB

Content

image-20220602165351-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-19.3 KB

Content

image-20220602171200-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-276.1 KB

Content

image-20220602171200-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-10.0 KB

Content

image-20220602175638-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.5 KB

Content

image-20220602175743-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-85.5 KB

Content

image-20220602175818-12.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-102.5 KB

Content

image-20220602175848-13.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-250.9 KB

Content

image-20220602175912-14.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-176.1 KB

Content

image-20220606110929-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-13.9 KB

Content

image-20220824144240-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-110.9 KB

Content

image-20220824145428-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-12.6 KB

Content

image-20220824145428-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-17.7 KB

Content

image-20220929111027-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-240.0 KB

Content

image-20221130104310-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-82.0 KB

Content

image-20221130104310-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-17.4 KB

Content

image-20221130104310-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-27.7 KB

Content

image-20221130104310-12.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-392.9 KB

Content

image-20221130104310-13.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-23.3 KB

Content

image-20221130104310-14.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-25.4 KB

Content

image-20221130104310-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-392.9 KB

Content

image-20221130104310-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-30.4 KB

Content

image-20221130104310-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-25.8 KB

Content

image-20221130104310-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-22.9 KB

Content

image-20221130104310-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-12.9 KB

Content

image-20221130104310-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-25.1 KB

Content

image-20221130104310-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-9.9 KB

Content

image-20221130104310-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-29.1 KB

Content