Skip to Content
Last modified by Xiaoling on 2025/07/10 16:21
From version 71.2
edited by Xiaoling
on 2024/01/09 16:07
Change comment: There is no comment for this version
To version 45.6
edited by Xiaoling
on 2023/02/21 15:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PS-LB/LS -- LoRaWAN Air Water Pressure Sensor User Manual
1 +PS-LB -- LoRaWAN Air Water Pressure Sensor User Manual
Content
... ... @@ -1,17 +1,9 @@
1 -
1 +[[image:image-20230131115217-1.png]]
2 2  
3 3  
4 -(% style="text-align:center" %)
5 -[[image:image-20240109154731-4.png||height="671" width="945"]]
6 6  
5 +**Table of Contents：**
7 7  
8 -
9 -
10 -
11 -
12 -
13 -**Table of Contents :**
14 -
15 15  {{toc/}}
16 16  
17 17  
... ... @@ -65,10 +65,10 @@
65 65  * Support wireless OTA update firmware
66 66  * Uplink on periodically
67 67  * Downlink to change configure
68 -* Controllable 3.3v,5v and 12v output to power external sensor
69 -* 8500mAh Li/SOCl2 Battery (PS-LB)
70 -* Solar panel + 3000mAh Li-on battery (PS-LS)
60 +* 8500mAh Battery for long term use
71 71  
62 +
63 +
72 72  == 1.3 Specification ==
73 73  
74 74  
... ... @@ -85,7 +85,7 @@
85 85  
86 86  (% style="color:#037691" %)**LoRa Spec:**
87 87  
88 -* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz,Band 2 (LF): 410 ~~ 528 Mhz
80 +* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
89 89  * Max +22 dBm constant RF output vs.
90 90  * RX sensitivity: down to -139 dBm.
91 91  * Excellent blocking immunity
... ... @@ -115,6 +115,8 @@
115 115  * Sleep Mode: 5uA @ 3.3v
116 116  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
117 117  
110 +
111 +
118 118  == 1.4 Probe Types ==
119 119  
120 120  === 1.4.1 Thread Installation Type ===
... ... @@ -133,19 +133,26 @@
133 133  * Operating temperature: -20℃~~60℃
134 134  * Connector Type: Various Types, see order info
135 135  
130 +
131 +
136 136  === 1.4.2 Immersion Type ===
137 137  
138 138  
139 -[[image:image-20240109160445-5.png||height="284" width="214"]]
135 +[[image:1675071521308-426.png]]
140 140  
141 141  * Immersion Type, Probe IP Level: IP68
142 142  * Measuring Range: Measure range can be customized, up to 100m.
143 143  * Accuracy: 0.2% F.S
144 144  * Long-Term Stability: ±0.2% F.S / Year
141 +* Overload 200% F.S
142 +* Zero Temperature Drift: ±2% F.S)
143 +* FS Temperature Drift: ±2% F.S
145 145  * Storage temperature: -30℃~~80℃
146 -* Operating temperature: 0℃~~50℃
145 +* Operating temperature: -40℃~~85℃
147 147  * Material: 316 stainless steels
148 148  
148 +
149 +
149 149  == 1.5 Probe Dimension ==
150 150  
151 151  
... ... @@ -200,21 +200,24 @@
200 200  == 1.8 Button & LEDs ==
201 201  
202 202  
203 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]](% style="display:none" %)
204 +[[image:1675071855856-879.png]]
204 204  
205 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
206 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
207 -|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
206 +
207 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
208 +|=(% style="width: 167px;" %)**Behavior on ACT**|=(% style="width: 117px;" %)**Function**|=(% style="width: 225px;" %)**Action**
209 +|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
208 208  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
209 209  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
210 210  )))
211 -|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
212 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
213 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
213 +|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
214 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
215 +(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
214 214  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
215 215  )))
216 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
218 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
217 217  
220 +
221 +
218 218  == 1.9 Pin Mapping ==
219 219  
220 220  
... ... @@ -238,15 +238,16 @@
238 238  
239 239  == 1.11 Mechanical ==
240 240  
241 -=== 1.11.1 for LB version(% style="display:none" %) (%%) ===
242 242  
246 +[[image:1675143884058-338.png]]
243 243  
244 -[[image:1675143884058-338.png]] [[image:1675143899218-599.png]]
245 245  
249 +[[image:1675143899218-599.png]]
246 246  
247 - [[image:1675143909447-639.png]]
248 248  
252 +[[image:1675143909447-639.png]]
249 249  
254 +
250 250  = 2. Configure PS-LB to connect to LoRaWAN network =
251 251  
252 252  == 2.1 How it works ==
... ... @@ -271,9 +271,10 @@
271 271  
272 272  Each PS-LB is shipped with a sticker with the default device EUI as below:
273 273  
274 -[[image:image-20230426085320-1.png||height="234" width="504"]]
279 +[[image:image-20230131134744-2.jpeg]]
275 275  
276 276  
282 +
277 277  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
278 278  
279 279  
... ... @@ -309,6 +309,15 @@
309 309  
310 310  == 2.3 ​Uplink Payload ==
311 311  
318 +
319 +Uplink payloads have two types:
320 +
321 +* Distance Value: Use FPORT=2
322 +* Other control commands: Use other FPORT fields.
323 +
324 +The application server should parse the correct value based on FPORT settings.
325 +
326 +
312 312  === 2.3.1 Device Status, FPORT~=5 ===
313 313  
314 314  
... ... @@ -317,10 +317,10 @@
317 317  Users can also use the downlink command(0x26 01) to ask PS-LB to resend this uplink.
318 318  
319 319  
320 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
321 -|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
322 -|(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
323 -|(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
335 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
336 +|(% colspan="6" %)**Device Status (FPORT=5)**
337 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
338 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
324 324  
325 325  Example parse in TTNv3
326 326  
... ... @@ -386,18 +386,32 @@
386 386  Uplink payload includes in total 9 bytes.
387 387  
388 388  
389 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
390 -|(% style="background-color:#d9e2f3; color:#0070c0; width:97px" %)(((
404 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
405 +|(% style="width:97px" %)(((
391 391  **Size(bytes)**
392 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:48px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:71px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:73px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:122px" %)**1**
393 -|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
407 +)))|(% style="width:48px" %)**2**|(% style="width:71px" %)**2**|(% style="width:98px" %)**2**|(% style="width:73px" %)**2**|(% style="width:122px" %)**1**
408 +|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.5ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.607E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.707E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.8IN126IN226INTpin"]]
394 394  
395 395  [[image:1675144608950-310.png]]
396 396  
397 397  
398 -=== 2.3.3 Battery Info ===
413 +=== 2.3.3 Sensor value, FPORT~=7 ===
399 399  
400 400  
416 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:508.222px" %)
417 +|(% style="width:94px" %)(((
418 +**Size(bytes)**
419 +)))|(% style="width:43px" %)2|(% style="width:367px" %)n
420 +|(% style="width:94px" %)**Value**|(% style="width:43px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:367px" %)(((
421 +Voltage value, each 2 bytes is a set of voltage values.
422 +)))
423 +
424 +[[image:image-20230220171300-1.png||height="207" width="863"]]
425 +
426 +
427 +=== 2.3.4 Battery Info ===
428 +
429 +
401 401  Check the battery voltage for PS-LB.
402 402  
403 403  Ex1: 0x0B45 = 2885mV
... ... @@ -405,27 +405,26 @@
405 405  Ex2: 0x0B49 = 2889mV
406 406  
407 407  
408 -=== 2.3.4 Probe Model ===
437 +=== 2.3.5 Probe Model ===
409 409  
410 410  
411 -PS-LB has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe. 
440 +PS-LB has different kind of probe, 0~~20mA represent the full scale of the measuring range. So a 15mA output means different meaning for different probe. 
412 412  
413 413  
414 -**For example.**
443 +For example.
415 415  
416 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
417 -|(% style="background-color:#d9e2f3; color:#0070c0" %)**Part Number**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Probe Used**|(% style="background-color:#d9e2f3; color:#0070c0" %)**4~~20mA scale**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Example: 12mA meaning**
418 -|(% style="background-color:#f2f2f2" %)PS-LB-I3|(% style="background-color:#f2f2f2" %)immersion type with 3 meters cable|(% style="background-color:#f2f2f2" %)0~~3 meters|(% style="background-color:#f2f2f2" %)1.5 meters pure water
419 -|(% style="background-color:#f2f2f2" %)PS-LB-I5|(% style="background-color:#f2f2f2" %)immersion type with 5 meters cable|(% style="background-color:#f2f2f2" %)0~~5 meters|(% style="background-color:#f2f2f2" %)2.5 meters pure water
420 -|(% style="background-color:#f2f2f2" %)PS-LB-T20-B|(% style="background-color:#f2f2f2" %)T20 threaded probe|(% style="background-color:#f2f2f2" %)0~~1MPa|(% style="background-color:#f2f2f2" %)0.5MPa air / gas or water pressure
445 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
446 +|(% style="width:111px" %)**Part Number**|(% style="width:158px" %)**Probe Used**|**0~~20mA scale**|**Example: 10mA meaning**
447 +|(% style="width:111px" %)PS-LB-I3|(% style="width:158px" %)immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
448 +|(% style="width:111px" %)PS-LB-I5|(% style="width:158px" %)immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
421 421  
422 -The probe model field provides the convenient for server to identical how it should parse the 4~~20mA sensor value and get the correct value.
450 +The probe model field provides the convenient for server to identical how it should parse the 0~~20mA sensor value and get the correct value.
423 423  
424 424  
425 -=== 2.3.5 0~~20mA value (IDC_IN) ===
453 +=== 2.3.6 0~~20mA value (IDC_IN) ===
426 426  
427 427  
428 -The output value from **Pressure Probe**, use together with Probe Model to get the pressure value or water level.
456 +The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
429 429  
430 430  (% style="color:#037691" %)**Example**:
431 431  
... ... @@ -432,14 +432,9 @@
432 432  27AE(H) = 10158 (D)/1000 = 10.158mA.
433 433  
434 434  
435 -Instead of pressure probe, User can also connect a general 4~~20mA in this port to support different types of 4~~20mA sensors. below is the connection example:
463 +=== 2.3.7 0~~30V value ( pin VDC_IN) ===
436 436  
437 -[[image:image-20230225154759-1.png||height="408" width="741"]]
438 438  
439 -
440 -=== 2.3.6 0~~30V value ( pin VDC_IN) ===
441 -
442 -
443 443  Measure the voltage value. The range is 0 to 30V.
444 444  
445 445  (% style="color:#037691" %)**Example**:
... ... @@ -447,7 +447,7 @@
447 447  138E(H) = 5006(D)/1000= 5.006V
448 448  
449 449  
450 -=== 2.3.7 IN1&IN2&INT pin ===
473 +=== 2.3.8 IN1&IN2&INT pin ===
451 451  
452 452  
453 453  IN1 and IN2 are used as digital input pins.
... ... @@ -459,7 +459,7 @@
459 459  09 (H): (0x09&0x04)>>2=0    IN2 pin is low level.
460 460  
461 461  
462 -This data field shows if this packet is generated by (% style="color:blue" %)**Interrupt Pin** (%%)or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
485 +This data field shows if this packet is generated by (% style="color:blue" %)**Interrupt Pin** (%%)or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
463 463  
464 464  (% style="color:#037691" %)**Example:**
465 465  
... ... @@ -470,24 +470,6 @@
470 470  0x01: Interrupt Uplink Packet.
471 471  
472 472  
473 -=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.8 Sensor value, FPORT~=7(%%) ===
474 -
475 -
476 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:508.222px" %)
477 -|(% style="background-color:#d9e2f3; color:#0070c0; width:94px" %)(((
478 -**Size(bytes)**
479 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:43px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:367px" %)**n**
480 -|(% style="width:94px" %)Value|(% style="width:43px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:367px" %)(((
481 -Voltage value, each 2 bytes is a set of voltage values.
482 -)))
483 -
484 -[[image:image-20230220171300-1.png||height="207" width="863"]]
485 -
486 -Multiple sets of data collected are displayed in this form：
487 -
488 -[voltage value1], [voltage value2], [voltage value3],…[voltage value n/2]
489 -
490 -
491 491  === 2.3.9 ​Decode payload in The Things Network ===
492 492  
493 493  
... ... @@ -534,6 +534,7 @@
534 534  
535 535  
536 536  
542 +
537 537  [[image:1675145029119-717.png]]
538 538  
539 539  
... ... @@ -567,37 +567,34 @@
567 567  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
568 568  
569 569  
570 -= 3. Configure PS-LB =
576 += 3. Configure PS-LB via AT Command or LoRaWAN Downlink =
571 571  
572 -== 3.1 Configure Methods ==
573 573  
579 +Use can configure PS-LB via AT Command or LoRaWAN Downlink.
574 574  
575 -PS-LB supports below configure method:
581 +* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
582 +* LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
576 576  
577 -* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
578 -* AT Command via UART Connection : See [[FAQ>>||anchor="H6.FAQ"]].
579 -* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
584 +There are two kinds of commands to configure PS-LB, they are:
580 580  
581 -== 3.2 General Commands ==
586 +* (% style="color:#037691" %)**General Commands**
582 582  
583 -
584 584  These commands are to configure:
585 585  
586 586  * General system settings like: uplink interval.
587 587  * LoRaWAN protocol & radio related command.
588 588  
589 -They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
593 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
590 590  
591 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
595 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
592 592  
593 593  
594 -== 3.3 Commands special design for PS-LB ==
598 +* (% style="color:#037691" %)**Commands special design for PS-LB**
595 595  
596 -
597 597  These commands only valid for PS-LB, as below:
598 598  
599 599  
600 -=== 3.3.1 Set Transmit Interval Time ===
603 +== 3.1 Set Transmit Interval Time ==
601 601  
602 602  
603 603  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -604,14 +604,14 @@
604 604  
605 605  (% style="color:blue" %)**AT Command: AT+TDC**
606 606  
607 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
608 -|=(% style="width: 160px; background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 160px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)**Response**
609 -|(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=?|(% style="background-color:#f2f2f2; width:166px" %)Show current transmit Interval|(% style="background-color:#f2f2f2" %)(((
610 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
611 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 137px;" %)**Function**|=**Response**
612 +|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
610 610  30000
611 611  OK
612 612  the interval is 30000ms = 30s
613 613  )))
614 -|(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=60000|(% style="background-color:#f2f2f2; width:166px" %)Set Transmit Interval|(% style="background-color:#f2f2f2" %)(((
617 +|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
615 615  OK
616 616  Set transmit interval to 60000ms = 60 seconds
617 617  )))
... ... @@ -625,27 +625,29 @@
625 625  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
626 626  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
627 627  
628 -=== 3.3.2 Set Interrupt Mode ===
629 629  
630 630  
633 +== 3.2 Set Interrupt Mode ==
634 +
635 +
631 631  Feature, Set Interrupt mode for GPIO_EXIT.
632 632  
633 633  (% style="color:blue" %)**AT Command: AT+INTMOD**
634 634  
635 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
636 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Response**
637 -|(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=?|(% style="background-color:#f2f2f2; width:196px" %)Show current interrupt mode|(% style="background-color:#f2f2f2; width:157px" %)(((
640 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
641 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 157px;" %)**Response**
642 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
638 638  0
639 639  OK
640 -the mode is 0 =Disable Interrupt
645 +the mode is 0 = No interruption
641 641  )))
642 -|(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=2|(% style="background-color:#f2f2f2; width:196px" %)(((
647 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
643 643  Set Transmit Interval
644 -0. (Disable Interrupt),
645 -~1. (Trigger by rising and falling edge)
646 -2. (Trigger by falling edge)
647 -3. (Trigger by rising edge)
648 -)))|(% style="background-color:#f2f2f2; width:157px" %)OK
649 +~1. (Disable Interrupt),
650 +2. (Trigger by rising and falling edge)
651 +3. (Trigger by falling edge)
652 +4. (Trigger by rising edge)
653 +)))|(% style="width:157px" %)OK
649 649  
650 650  (% style="color:blue" %)**Downlink Command: 0x06**
651 651  
... ... @@ -656,59 +656,61 @@
656 656  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
657 657  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
658 658  
659 -=== 3.3.3 Set the output time ===
660 660  
661 661  
666 +== 3.3 Set the output time ==
667 +
668 +
662 662  Feature, Control the output 3V3 , 5V or 12V.
663 663  
664 664  (% style="color:blue" %)**AT Command: AT+3V3T**
665 665  
666 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:474px" %)
667 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 201px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 119px;background-color:#D9E2F3;color:#0070C0" %)**Response**
668 -|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=?|(% style="background-color:#f2f2f2; width:201px" %)Show 3V3 open time.|(% style="background-color:#f2f2f2; width:116px" %)(((
673 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:474px" %)
674 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 201px;" %)**Function**|=(% style="width: 116px;" %)**Response**
675 +|(% style="width:154px" %)AT+3V3T=?|(% style="width:201px" %)Show 3V3 open time.|(% style="width:116px" %)(((
669 669  0
670 670  OK
671 671  )))
672 -|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=0|(% style="background-color:#f2f2f2; width:201px" %)Normally open 3V3 power supply.|(% style="background-color:#f2f2f2; width:116px" %)(((
679 +|(% style="width:154px" %)AT+3V3T=0|(% style="width:201px" %)Normally open 3V3 power supply.|(% style="width:116px" %)(((
673 673  OK
674 674  default setting
675 675  )))
676 -|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=1000|(% style="background-color:#f2f2f2; width:201px" %)Close after a delay of 1000 milliseconds.|(% style="background-color:#f2f2f2; width:116px" %)(((
683 +|(% style="width:154px" %)AT+3V3T=1000|(% style="width:201px" %)Close after a delay of 1000 milliseconds.|(% style="width:116px" %)(((
677 677  OK
678 678  )))
679 -|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=65535|(% style="background-color:#f2f2f2; width:201px" %)Normally closed 3V3 power supply.|(% style="background-color:#f2f2f2; width:116px" %)(((
686 +|(% style="width:154px" %)AT+3V3T=65535|(% style="width:201px" %)Normally closed 3V3 power supply.|(% style="width:116px" %)(((
680 680  OK
681 681  )))
682 682  
683 683  (% style="color:blue" %)**AT Command: AT+5VT**
684 684  
685 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:470px" %)
686 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 119px;background-color:#D9E2F3;color:#0070C0" %)**Response**
687 -|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=?|(% style="background-color:#f2f2f2; width:196px" %)Show 5V open time.|(% style="background-color:#f2f2f2; width:114px" %)(((
692 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:470px" %)
693 +|=(% style="width: 155px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 114px;" %)**Response**
694 +|(% style="width:155px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:114px" %)(((
688 688  0
689 689  OK
690 690  )))
691 -|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=0|(% style="background-color:#f2f2f2; width:196px" %)Normally closed 5V power supply.|(% style="background-color:#f2f2f2; width:114px" %)(((
698 +|(% style="width:155px" %)AT+5VT=0|(% style="width:196px" %)Normally closed 5V power supply.|(% style="width:114px" %)(((
692 692  OK
693 693  default setting
694 694  )))
695 -|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=1000|(% style="background-color:#f2f2f2; width:196px" %)Close after a delay of 1000 milliseconds.|(% style="background-color:#f2f2f2; width:114px" %)(((
702 +|(% style="width:155px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:114px" %)(((
696 696  OK
697 697  )))
698 -|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=65535|(% style="background-color:#f2f2f2; width:196px" %)Normally open 5V power supply.|(% style="background-color:#f2f2f2; width:114px" %)(((
705 +|(% style="width:155px" %)AT+5VT=65535|(% style="width:196px" %)Normally open 5V power supply.|(% style="width:114px" %)(((
699 699  OK
700 700  )))
701 701  
702 702  (% style="color:blue" %)**AT Command: AT+12VT**
703 703  
704 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:443px" %)
705 -|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 199px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
706 -|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=?|(% style="background-color:#f2f2f2; width:199px" %)Show 12V open time.|(% style="background-color:#f2f2f2; width:83px" %)(((
711 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:443px" %)
712 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 199px;" %)**Function**|=(% style="width: 83px;" %)**Response**
713 +|(% style="width:156px" %)AT+12VT=?|(% style="width:199px" %)Show 12V open time.|(% style="width:83px" %)(((
707 707  0
708 708  OK
709 709  )))
710 -|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=0|(% style="background-color:#f2f2f2; width:199px" %)Normally closed 12V power supply.|(% style="background-color:#f2f2f2; width:83px" %)OK
711 -|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=500|(% style="background-color:#f2f2f2; width:199px" %)Close after a delay of 500 milliseconds.|(% style="background-color:#f2f2f2; width:83px" %)(((
717 +|(% style="width:156px" %)AT+12VT=0|(% style="width:199px" %)Normally closed 12V power supply.|(% style="width:83px" %)OK
718 +|(% style="width:156px" %)AT+12VT=500|(% style="width:199px" %)Close after a delay of 500 milliseconds.|(% style="width:83px" %)(((
712 712  OK
713 713  )))
714 714  
... ... @@ -725,74 +725,58 @@
725 725  * Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
726 726  * Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
727 727  
728 -=== 3.3.4 Set the Probe Model ===
729 729  
730 730  
731 -Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
737 +== 3.4 Set the Probe Model ==
732 732  
733 -(% style="color:blue" %)**AT Command: AT** **+PROBE**
734 734  
735 -AT+PROBE=aabb
740 +(% style="color:blue" %)**AT Command: AT** **+PROBE**
736 736  
737 -When aa=00, it is the water depth mode, and the current is converted into the water depth value; bb is the probe at a depth of several meters.
738 -
739 -When aa=01, it is the pressure mode, which converts the current into a pressure value;
740 -
741 -bb represents which type of pressure sensor it is.
742 -
743 -(A->01,B->02,C->03,D->04,E->05,F->06,G->07,H->08,I->09,J->0A,K->0B,L->0C)
744 -
745 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
746 -|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:269px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Response**
747 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=?|(% style="background-color:#f2f2f2; width:269px" %)Get or Set the probe model.|(% style="background-color:#f2f2f2" %)0
742 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:448px" %)
743 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 204px;" %)**Function**|=(% style="width: 85px;" %)**Response**
744 +|(% style="width:154px" %)AT +PROBE =?|(% style="width:204px" %)Get or Set the probe model.|(% style="width:85px" %)(((
745 +0
748 748  OK
749 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0003|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 3m type.|(% style="background-color:#f2f2f2" %)OK
750 -|(% style="background-color:#f2f2f2; width:154px" %)(((
751 -AT+PROBE=000A
752 -)))|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 10m type.|(% style="background-color:#f2f2f2" %)OK
753 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0064|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 100m type.|(% style="background-color:#f2f2f2" %)OK
754 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0101|(% style="background-color:#f2f2f2; width:269px" %)Set pressure transmitters mode, first type(A).|(% style="background-color:#f2f2f2" %)OK
755 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0000|(% style="background-color:#f2f2f2; width:269px" %)Initial state, no settings.|(% style="background-color:#f2f2f2" %)OK
747 +)))
748 +|(% style="width:154px" %)AT +PROBE =0003|(% style="width:204px" %)Set water depth sensor mode, 3m type.|(% style="width:85px" %)OK
749 +|(% style="width:154px" %)AT +PROBE =0101|(% style="width:204px" %)Set pressure transmitters mode, first type.|(% style="width:85px" %)(((
750 +OK
751 +)))
752 +|(% style="width:154px" %)AT +PROBE =0000|(% style="width:204px" %)Initial state, no settings.|(% style="width:85px" %)(((
753 +OK
754 +)))
756 756  
757 757  (% style="color:blue" %)**Downlink Command: 0x08**
758 758  
759 759  Format: Command Code (0x08) followed by 2 bytes.
760 760  
761 -* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
762 -* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
760 +* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
761 +* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
763 763  
764 -=== 3.3.5 Multiple collections are one uplink（Since firmware V1.1） ===
765 765  
766 766  
765 +== 3.5 Multiple collections are one uplink（Since firmware V1.1） ==
766 +
767 +
767 767  Added AT+STDC command to collect the voltage of VDC_INPUT multiple times and upload it at one time.
768 768  
769 769  (% style="color:blue" %)**AT Command: AT** **+STDC**
770 770  
771 -AT+STDC=aa,bb,bb
772 -
773 -(% style="color:#037691" %)**aa:**(%%)
774 -**0:** means disable this function and use TDC to send packets.
775 -**1:** means enable this function, use the method of multiple acquisitions to send packets.
776 -(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
777 -(% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
778 -
779 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
780 -|(% style="background-color:#d9e2f3; color:#0070c0; width:160px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:215px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Response**
781 -|(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=?|(% style="background-color:#f2f2f2; width:215px" %)Get the mode of multiple acquisitions and one uplink.|(% style="background-color:#f2f2f2" %)1,10,18
772 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
773 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 137px;" %)**Function**|=**Response**
774 +|(% style="width:156px" %)AT+STDC=?|(% style="width:137px" %)(((
775 +Get the mode of multiple acquisitions and one uplink
776 +)))|(((
777 +1,10,18
782 782  OK
783 -|(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=1,10,18|(% style="background-color:#f2f2f2; width:215px" %)Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(% style="background-color:#f2f2f2" %)(((
784 -Attention:Take effect after ATZ
785 -
786 -OK
787 787  )))
788 -|(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=0, 0,0|(% style="background-color:#f2f2f2; width:215px" %)(((
789 -Use the TDC interval to send packets.(default)
790 -
791 -
792 -)))|(% style="background-color:#f2f2f2" %)(((
793 -Attention:Take effect after ATZ
794 -
780 +|(% style="width:156px" %)AT+STDC=1,10,18|(% style="width:137px" %)Set the mode of multiple acquisitions and one uplink|(((
795 795  OK
782 +(% style="color:#037691" %)**aa:**(%%)
783 +**0:** means disable this function and use TDC to send packets.
784 +**1:** means enable this function, use the method of multiple acquisitions to send packets.
785 +(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
786 +(% style="color:#037691" %)**cc: **(%%)the number of collection times, the value is 1~~120
796 796  )))
797 797  
798 798  (% style="color:blue" %)**Downlink Command: 0xAE**
... ... @@ -801,55 +801,115 @@
801 801  
802 802  * Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
803 803  
804 -= 4. Battery & Power Consumption =
805 805  
806 806  
807 -PS-LB uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
797 += 4. Battery & how to replace =
808 808  
809 -[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
799 +== 4.1 Battery Type ==
810 810  
811 811  
812 -= 5. OTA firmware update =
802 +PS-LB is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>https://www.dropbox.com/sh/w9l2oa3ytpculph/AAAPtt-apH4lYfCj-2Y6lHvQa?dl=0]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
813 813  
804 +The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
814 814  
815 -Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
806 +[[image:1675146710956-626.png]]
816 816  
817 817  
818 -= 6. FAQ =
809 +Minimum Working Voltage for the PS-LB:
819 819  
820 -== 6.1 How to use AT Command via UART to access device? ==
811 +PS-LB:  2.45v ~~ 3.6v
821 821  
822 822  
823 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
814 +== 4.2 Replace Battery ==
824 824  
825 825  
826 -== 6.2 How to update firmware via UART port? ==
817 +Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
827 827  
819 +And make sure the positive and negative pins match.
828 828  
829 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
830 830  
822 +== 4.3 Power Consumption Analyze ==
831 831  
832 -== 6.3 How to change the LoRa Frequency Bands/Region? ==
833 833  
825 +Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
834 834  
835 -You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
836 -When downloading the images, choose the required image file for download. ​
827 +Instruction to use as below:
837 837  
829 +(% style="color:blue" %)**Step 1:**(%%) Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0>>https://www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0]]
838 838  
839 -= 7. Troubleshooting =
831 +(% style="color:blue" %)**Step 2:**(%%) Open it and choose
840 840  
841 -== 7.1 Water Depth Always shows 0 in payload ==
833 +* Product Model
834 +* Uplink Interval
835 +* Working Mode
842 842  
837 +And the Life expectation in difference case will be shown on the right.
843 843  
844 -If your device's IDC_intput_mA is normal, but your reading always shows 0, please refer to the following points:
839 +[[image:1675146895108-304.png]]
845 845  
846 -~1. Please set it to mod1
847 847  
848 -2. Please set the command [[AT+PROBE>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/PS-LB%20--%20LoRaWAN%20Pressure%20Sensor/#H3.3.4SettheProbeModel]] according to the model of your sensor
842 +The battery related documents as below:
849 849  
850 -3. Check the connection status of the sensor
844 +* [[Battery Dimension>>https://www.dropbox.com/s/ox5g9njwjle7aw3/LSN50-Battery-Dimension.pdf?dl=0]],
845 +* [[Lithium-Thionyl Chloride Battery datasheet, Tech Spec>>https://www.dropbox.com/sh/d4oyfnp8o94180o/AABQewCNSh5GPeQH86UxRgQQa?dl=0]]
846 +* [[Lithium-ion Battery-Capacitor datasheet>>https://www.dropbox.com/s/791gjes2lcbfi1p/SPC_1520_datasheet.jpg?dl=0]], [[Tech Spec>>https://www.dropbox.com/s/4pkepr9qqqvtzf2/SPC1520%20Technical%20Specification20171123.pdf?dl=0]]
851 851  
848 +[[image:image-20230131145708-3.png]]
852 852  
850 +
851 +=== 4.3.1 ​Battery Note ===
852 +
853 +
854 +The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
855 +
856 +
857 +=== 4.3.2 Replace the battery ===
858 +
859 +
860 +You can change the battery in the PS-LB.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
861 +
862 +The default battery pack of PS-LB includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
863 +
864 +
865 += 5. Remote Configure device =
866 +
867 +== 5.1 Connect via BLE ==
868 +
869 +
870 +Please see this instruction for how to configure via BLE: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]]
871 +
872 +
873 +== 5.2 AT Command Set ==
874 +
875 +
876 +
877 += 6. OTA firmware update =
878 +
879 +
880 +Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
881 +
882 +
883 += 7. FAQ =
884 +
885 +== 7.1 How to use AT Command to access device? ==
886 +
887 +
888 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
889 +
890 +
891 +== 7.2 How to update firmware via UART port? ==
892 +
893 +
894 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
895 +
896 +
897 +== 7.3 How to change the LoRa Frequency Bands/Region? ==
898 +
899 +
900 +You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
901 +When downloading the images, choose the required image file for download. ​
902 +
903 +
853 853  = 8. Order Info =
854 854  
855 855  
... ... @@ -870,11 +870,13 @@
870 870  * Package Size / pcs : cm
871 871  * Weight / pcs : g
872 872  
924 +
925 +
873 873  = 10. Support =
874 874  
875 875  
876 876  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
877 877  
878 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
931 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
879 879  
880 880  
image-20230222174559-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20230225154759-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -468.9 KB
Content
image-20230426085320-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content
image-20231120110833-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -255.7 KB
Content
image-20231120110949-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -217.3 KB
Content
image-20231120111036-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -273.4 KB
Content
image-20231120111226-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -340.3 KB
Content
image-20240109154009-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -297.0 KB
Content
image-20240109154121-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -414.4 KB
Content
image-20240109154227-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -342.4 KB
Content
image-20240109154731-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -511.6 KB
Content
image-20240109160445-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -88.8 KB
Content