Changes for page PS-LB/LS -- LoRaWAN Air Water Pressure Sensor User Manual

Last modified by Xiaoling on 2025/07/10 16:21

From 42.15 to 42.14 From 71.1 to 70.6

From version 70.6

edited by Xiaoling
on 2024/01/09 16:03

Change comment: There is no comment for this version

To version 42.15

edited by Xiaoling
on 2023/01/31 16:10

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 13 removed)

Details

Page properties

Title

@@ -1,1 +1,1 @@
--PS-LB/LS -- LoRaWAN Air Water Pressure Sensor User Manual
++PS-LB -- LoRaWAN Air Water Pressure Sensor User Manual

Content

@@ -1,17 +1,9 @@
--
++[[image:image-20230131115217-1.png]]
--(% style="text-align:center" %)
--[[image:image-20240109154731-4.png||height="671" width="945"]]
++**Table of Contents：**
--
--
--
--
--
--**Table of Contents :**
--
  {{toc/}}
@@ -24,33 +24,22 @@
  == 1.1 What is LoRaWAN Pressure Sensor ==
--(((
--The Dragino PS-LB series sensors are (% style="color:blue" %)**LoRaWAN Pressure Sensor**(%%) for Internet of Things solution. PS-LB can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
--)))
++The Dragino PS-LB series sensors are **(% style="color:blue" %)LoRaWAN Pressure Sensor**(%%) for Internet of Things solution. PS-LB can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
--(((
--The PS-LB series sensors include (% style="color:blue" %)**Thread Installation Type**(%%) and (% style="color:blue" %)**Immersion Type**(%%), it supports different pressure range which can be used for different measurement requirement.
--)))
++The PS-LB series sensors include **(% style="color:blue" %)Thread Installation Type**(%%) and **(% style="color:blue" %)Immersion Type**(%%), it supports different pressure range which can be used for different measurement requirement.
--(((
  The LoRa wireless technology used in PS-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
--)))
--(((
  PS-LB supports BLE configure and wireless OTA update which make user easy to use.
--)))
--(((
--PS-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
--)))
++PS-LB is powered by **(% style="color:blue" %)8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
--(((
  Each PS-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
--)))
  [[image:1675071321348-194.png]]
++
  == 1.2 Features ==
@@ -65,44 +65,43 @@
  * Support wireless OTA update firmware
  * Uplink on periodically
  * Downlink to change configure
--* Controllable 3.3v,5v and 12v output to power external sensor
--* 8500mAh Li/SOCl2 Battery (PS-LB)
--* Solar panel + 3000mAh Li-on battery (PS-LS)
++* 8500mAh Battery for long term use
++
  == 1.3 Specification ==
--(% style="color:#037691" %)**Micro Controller:**
++**(% style="color:#037691" %)Micro Controller:**
  * MCU: 48Mhz ARM
  * Flash: 256KB
  * RAM: 64KB
--(% style="color:#037691" %)**Common DC Characteristics:**
++**(% style="color:#037691" %)Common DC Characteristics:**
  * Supply Voltage: 2.5v ~~ 3.6v
  * Operating Temperature: -40 ~~ 85°C
--(% style="color:#037691" %)**LoRa Spec:**
++**(% style="color:#037691" %)LoRa Spec:**
--* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz,Band 2 (LF): 410 ~~ 528 Mhz
++* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
  * Max +22 dBm constant RF output vs.
  * RX sensitivity: down to -139 dBm.
  * Excellent blocking immunity
--(% style="color:#037691" %)**Current Input Measuring :**
++**(% style="color:#037691" %)Current Input Measuring :**
  * Range: 0 ~~ 20mA
  * Accuracy: 0.02mA
  * Resolution: 0.001mA
--(% style="color:#037691" %)**Voltage Input Measuring:**
++**(% style="color:#037691" %)Voltage Input Measuring:**
  * Range: 0 ~~ 30v
  * Accuracy: 0.02v
  * Resolution: 0.001v
--(% style="color:#037691" %)**Battery:**
++**(% style="color:#037691" %)Battery:**
  * Li/SOCI2 un-chargeable battery
  * Capacity: 8500mAh
@@ -110,11 +110,12 @@
  * Max continuously current: 130mA
  * Max boost current: 2A, 1 second
--(% style="color:#037691" %)**Power Consumption**
++**(% style="color:#037691" %)Power Consumption**
  * Sleep Mode: 5uA @ 3.3v
  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
++
  == 1.4 Probe Types ==
  === 1.4.1 Thread Installation Type ===
@@ -133,6 +133,7 @@
  * Operating temperature: -20℃~~60℃
  * Connector Type: Various Types, see order info
++
  === 1.4.2 Immersion Type ===
@@ -142,20 +142,25 @@
  * Measuring Range: Measure range can be customized, up to 100m.
  * Accuracy: 0.2% F.S
  * Long-Term Stability: ±0.2% F.S / Year
++* Overload 200% F.S
++* Zero Temperature Drift: ±2% F.S)
++* FS Temperature Drift: ±2% F.S
  * Storage temperature: -30℃~~80℃
--* Operating temperature: 0℃~~50℃
++* Operating temperature: -40℃~~85℃
  * Material: 316 stainless steels
++
  == 1.5 Probe Dimension ==
++
  == 1.6 Application and Installation ==
  === 1.6.1 Thread Installation Type ===
--(% style="color:blue" %)**Application:**
++**(% style="color:blue" %)Application:**
  * Hydraulic Pressure
  * Petrochemical Industry
@@ -173,7 +173,7 @@
  === 1.6.2 Immersion Type ===
--(% style="color:blue" %)**Application:**
++**(% style="color:blue" %)Application:**
  Liquid & Water Pressure / Level detect.
@@ -192,9 +192,9 @@
  == 1.7 Sleep mode and working mode ==
--(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
++**(% style="color:blue" %)Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
--(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
++**(% style="color:blue" %)Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
  == 1.8 Button & LEDs ==
@@ -203,19 +203,24 @@
  [[image:1675071855856-879.png]]
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
--|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
--If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|(% style="width:138px" %)**Behavior on ACT**|(% style="width:100px" %)**Function**|**Action**
++|(% style="width:138px" %)Pressing ACT between 1s < time < 3s|(% style="width:100px" %)Send an uplink|(((
++If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, **(% style="color:blue" %)blue led** (%%)will blink once.
++
  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
  )))
--|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
--(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
--(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
++|(% style="width:138px" %)Pressing ACT for more than 3s|(% style="width:100px" %)Active Device|(((
++**(% style="color:green" %)Green led**(%%) will fast blink 5 times, device will enter **(% style="color:#037691" %)OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
++
++**(% style="color:green" %)Green led**(%%) will solidly turn on for 5 seconds after joined in network.
++
  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
  )))
--|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
++|(% style="width:138px" %)Fast press ACT 5 times.|(% style="width:100px" %)Deactivate Device|red led will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
++
++
  == 1.9 Pin Mapping ==
@@ -240,6 +240,8 @@
  == 1.11 Mechanical ==
++
++
  [[image:1675143884058-338.png]]
@@ -254,9 +254,10 @@
  == 2.1 How it works ==
--The PS-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
++The PS-LB is configured as **(% style="color:#037691" %)LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
++
  == 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==
@@ -269,48 +269,59 @@
  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
--(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from PS-LB.
++**(% style="color:blue" %)Step 1:**(%%) Create a device in TTN with the OTAA keys from PS-LB.
  Each PS-LB is shipped with a sticker with the default device EUI as below:
--[[image:image-20230426085320-1.png||height="234" width="504"]]
++[[image:image-20230131134744-2.jpeg]]
++
  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
--(% style="color:blue" %)**Register the device**
++**(% style="color:blue" %)Register the device**
  [[image:1675144099263-405.png]]
--(% style="color:blue" %)**Add APP EUI and DEV EUI**
++**(% style="color:blue" %)Add APP EUI and DEV EUI**
  [[image:1675144117571-832.png]]
--(% style="color:blue" %)**Add APP EUI in the application**
++**(% style="color:blue" %)Add APP EUI in the application**
  [[image:1675144143021-195.png]]
--(% style="color:blue" %)**Add APP KEY**
++**(% style="color:blue" %)Add APP KEY**
  [[image:1675144157838-392.png]]
--(% style="color:blue" %)**Step 2:**(%%) Activate on PS-LB
++**(% style="color:blue" %)Step 2:**(%%) Activate on PS-LB
  Press the button for 5 seconds to activate the PS-LB.
--(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
++**(% style="color:green" %)Green led**(%%) will fast blink 5 times, device will enter **(% style="color:blue" %)OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. **(% style="color:green" %)Green led**(%%) will solidly turn on for 5 seconds after joined in network.
  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
++
  == 2.3 Uplink Payload ==
++
++Uplink payloads have two types:
++
++* Distance Value: Use FPORT=2
++* Other control commands: Use other FPORT fields.
++
++The application server should parse the correct value based on FPORT settings.
++
++
  === 2.3.1 Device Status, FPORT~=5 ===
@@ -319,10 +319,10 @@
  Users can also use the downlink command(0x26 01) to ask PS-LB to resend this uplink.
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
--|(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
--|(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|(% colspan="6" %)**Device Status (FPORT=5)**
++|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|**1**|**1**|**2**
++|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|Frequency Band|Sub-band|BAT
  Example parse in TTNv3
@@ -329,11 +329,11 @@
  [[image:1675144504430-490.png]]
--(% style="color:#037691" %)**Sensor Model**(%%): For PS-LB, this value is 0x16
++**(% style="color:#037691" %)Sensor Model**(%%): For PS-LB, this value is 0x16
--(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
++**(% style="color:#037691" %)Firmware Version**(%%): 0x0100, Means: v1.0.0 version
--(% style="color:#037691" %)**Frequency Band**:
++**(% style="color:#037691" %)Frequency Band**:
  *0x01: EU868
@@ -364,7 +364,7 @@
  *0x0e: MA869
--(% style="color:#037691" %)**Sub-Band**:
++**(% style="color:#037691" %)Sub-Band**:
  AU915 and US915:value 0x00 ~~ 0x08
@@ -373,7 +373,7 @@
  Other Bands: Always 0x00
--(% style="color:#037691" %)**Battery Info**:
++**(% style="color:#037691" %)Battery Info**:
  Check the battery voltage.
@@ -388,15 +388,16 @@
  Uplink payload includes in total 9 bytes.
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|(% style="background-color:#d9e2f3; color:#0070c0; width:97px" %)(((
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|(% style="width:97px" %)(((
  **Size(bytes)**
--)))|(% style="background-color:#d9e2f3; color:#0070c0; width:48px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:71px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:73px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:122px" %)**1**
--|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
++)))|(% style="width:48px" %)**2**|(% style="width:58px" %)**2**|**2**|**2**|**1**
++|(% style="width:97px" %)**Value**|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:58px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
  [[image:1675144608950-310.png]]
++
  === 2.3.3 Battery Info ===
@@ -410,41 +410,35 @@
  === 2.3.4 Probe Model ===
--PS-LB has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe.
++PS-LB has different kind of probe, 0~~20mA represent the full scale of the measuring range. So a 15mA output means different meaning for different probe.
--**For example.**
++For example.
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|(% style="background-color:#d9e2f3; color:#0070c0" %)**Part Number**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Probe Used**|(% style="background-color:#d9e2f3; color:#0070c0" %)**4~~20mA scale**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Example: 12mA meaning**
--|(% style="background-color:#f2f2f2" %)PS-LB-I3|(% style="background-color:#f2f2f2" %)immersion type with 3 meters cable|(% style="background-color:#f2f2f2" %)0~~3 meters|(% style="background-color:#f2f2f2" %)1.5 meters pure water
--|(% style="background-color:#f2f2f2" %)PS-LB-I5|(% style="background-color:#f2f2f2" %)immersion type with 5 meters cable|(% style="background-color:#f2f2f2" %)0~~5 meters|(% style="background-color:#f2f2f2" %)2.5 meters pure water
--|(% style="background-color:#f2f2f2" %)PS-LB-T20-B|(% style="background-color:#f2f2f2" %)T20 threaded probe|(% style="background-color:#f2f2f2" %)0~~1MPa|(% style="background-color:#f2f2f2" %)0.5MPa air / gas or water pressure
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|(% style="width:111px" %)**Part Number**|(% style="width:158px" %)**Probe Used**|**0~~20mA scale**|**Example: 10mA meaning**
++|(% style="width:111px" %)PS-LB-I3|(% style="width:158px" %)immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
++|(% style="width:111px" %)PS-LB-I5|(% style="width:158px" %)immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
--The probe model field provides the convenient for server to identical how it should parse the 4~~20mA sensor value and get the correct value.
++The probe model field provides the convenient for server to identical how it should parse the 0~~20mA sensor value and get the correct value.
  === 2.3.5 0~~20mA value (IDC_IN) ===
--The output value from **Pressure Probe**, use together with Probe Model to get the pressure value or water level.
++The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
--(% style="color:#037691" %)**Example**:
++**(% style="color:#037691" %)Example**:
 AE(H) = 10158 (D)/1000 = 10.158mA.
--Instead of pressure probe, User can also connect a general 4~~20mA in this port to support different types of 4~~20mA sensors. below is the connection example:
--
--[[image:image-20230225154759-1.png||height="408" width="741"]]
--
--
  === 2.3.6 0~~30V value ( pin VDC_IN) ===
  Measure the voltage value. The range is 0 to 30V.
--(% style="color:#037691" %)**Example**:
++**(% style="color:#037691" %)Example**:
 E(H) = 5006(D)/1000= 5.006V
@@ -454,45 +454,27 @@
  IN1 and IN2 are used as digital input pins.
--(% style="color:#037691" %)**Example**:
++**(% style="color:#037691" %)Example**:
--09 (H): (0x09&0x08)>>3=1    IN1 pin is high level.
++09 (H) :(0x09&0x08)>>3=1    IN1 pin is high level.
--09 (H): (0x09&0x04)>>2=0    IN2 pin is low level.
++09 (H) :(0x09&0x04)>>2=0    IN2 pin is low level.
--This data field shows if this packet is generated by (% style="color:blue" %)**Interrupt Pin** (%%)or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
++This data field shows if this packet is generated by **(% style="color:blue" %)Interrupt Pin** (%%)or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
--(% style="color:#037691" %)**Example:**
++**(% style="color:#037691" %)Example:**
--09 (H): (0x09&0x02)>>1=1    The level of the interrupt pin.
++09 (H) :(0x09&0x02)>>1=1    The level of the interrupt pin.
--09 (H): 0x09&0x01=1              0x00: Normal uplink packet.
++09 (H) :0x09&0x01=1              0x00: Normal uplink packet.
 x01: Interrupt Uplink Packet.
--=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.8 Sensor value, FPORT~=7(%%) ===
++=== 2.3.8 Decode payload in The Things Network ===
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:508.222px" %)
--|(% style="background-color:#d9e2f3; color:#0070c0; width:94px" %)(((
--**Size(bytes)**
--)))|(% style="background-color:#d9e2f3; color:#0070c0; width:43px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:367px" %)**n**
--|(% style="width:94px" %)Value|(% style="width:43px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:367px" %)(((
--Voltage value, each 2 bytes is a set of voltage values.
--)))
--
--[[image:image-20230220171300-1.png||height="207" width="863"]]
--
--Multiple sets of data collected are displayed in this form：
--
--[voltage value1], [voltage value2], [voltage value3],…[voltage value n/2]
--
--
--=== 2.3.9 Decode payload in The Things Network ===
--
--
  While using TTN network, you can add the payload format to decode the payload.
@@ -514,9 +514,9 @@
  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
--(% style="color:blue" %)**Step 1: **(%%)Be sure that your device is programmed and properly connected to the network at this time.
++**(% style="color:blue" %)Step 1: **(%%)Be sure that your device is programmed and properly connected to the network at this time.
--(% style="color:blue" %)**Step 2:**(%%) To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
++**(% style="color:blue" %)Step 2:**(%%) To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
  [[image:1675144951092-237.png]]
@@ -525,9 +525,9 @@
  [[image:1675144960452-126.png]]
--(% style="color:blue" %)**Step 3:**(%%) Create an account or log in Datacake.
++**(% style="color:blue" %)Step 3:**(%%) Create an account or log in Datacake.
--(% style="color:blue" %)**Step 4:** (%%)Create PS-LB product.
++**(% style="color:#blue" %)Step 4:** (%%)Create PS-LB product.
  [[image:1675145004465-869.png]]
@@ -536,10 +536,11 @@
++
  [[image:1675145029119-717.png]]
--(% style="color:blue" %)**Step 5: **(%%)add payload decode
++**(% style="color:blue" %)Step 5: **(%%)add payload decode
  [[image:1675145051360-659.png]]
@@ -547,6 +547,7 @@
  [[image:1675145060812-420.png]]
++
  After added, the sensor data arrive TTN, it will also arrive and show in Datacake.
@@ -569,289 +569,341 @@
  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
--= 3. Configure PS-LB =
--== 3.1 Configure Methods ==
++= 3. Configure PS-LB via AT Command or LoRaWAN Downlink =
--PS-LB supports below configure method:
++Use can configure PS-LB via AT Command or LoRaWAN Downlink.
--* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
--* AT Command via UART Connection : See [[FAQ>>||anchor="H6.FAQ"]].
--* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
++* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
++* LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
--== 3.2 General Commands ==
++There are two kinds of commands to configure PS-LB, they are:
++* **General Commands**.
++
  These commands are to configure:
  * General system settings like: uplink interval.
  * LoRaWAN protocol & radio related command.
--They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
++They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
--[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
++[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
--== 3.3 Commands special design for PS-LB ==
++* **Commands special design for PS-LB**
--
  These commands only valid for PS-LB, as below:
--=== 3.3.1 Set Transmit Interval Time ===
++== 3.1 Set Transmit Interval Time ==
  Feature: Change LoRaWAN End Node Transmit Interval.
--(% style="color:blue" %)**AT Command: AT+TDC**
++**AT Command: AT+TDC**
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 160px; background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 160px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=?|(% style="background-color:#f2f2f2; width:166px" %)Show current transmit Interval|(% style="background-color:#f2f2f2" %)(((
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|**Command Example**|**Function**|**Response**
++|AT+TDC=?|Show current transmit Interval|(((
++
  OK
++
  the interval is 30000ms = 30s
  )))
--|(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=60000|(% style="background-color:#f2f2f2; width:166px" %)Set Transmit Interval|(% style="background-color:#f2f2f2" %)(((
++|AT+TDC=60000|Set Transmit Interval|(((
  OK
++
  Set transmit interval to 60000ms = 60 seconds
  )))
--(% style="color:blue" %)**Downlink Command: 0x01**
++**Downlink Command: 0x01**
  Format: Command Code (0x01) followed by 3 bytes time value.
--If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
++If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
--* Example 1: Downlink Payload: 0100001E       ~/~/  Set Transmit Interval (TDC) = 30 seconds
--* Example 2: Downlink Payload: 0100003C       ~/~/  Set Transmit Interval (TDC) = 60 seconds
++* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
++* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
--=== 3.3.2 Set Interrupt Mode ===
++== 3.2 Set Interrupt Mode ==
++
  Feature, Set Interrupt mode for GPIO_EXIT.
--(% style="color:blue" %)**AT Command: AT+INTMOD**
++**AT Command: AT+INTMOD**
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=?|(% style="background-color:#f2f2f2; width:196px" %)Show current interrupt mode|(% style="background-color:#f2f2f2; width:157px" %)(((
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|**Command Example**|**Function**|**Response**
++|AT+INTMOD=?|Show current interrupt mode|(((
++
  OK
--the mode is 0 =Disable Interrupt
++
++the mode is 0 = No interruption
  )))
--|(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=2|(% style="background-color:#f2f2f2; width:196px" %)(((
++|AT+INTMOD=2|(((
  Set Transmit Interval
--0. (Disable Interrupt),
--~1. (Trigger by rising and falling edge)
--2. (Trigger by falling edge)
--3. (Trigger by rising edge)
--)))|(% style="background-color:#f2f2f2; width:157px" %)OK
--(% style="color:blue" %)**Downlink Command: 0x06**
++~1. (Disable Interrupt),
++2. (Trigger by rising and falling edge),
++
++3. (Trigger by falling edge)
++
++4. (Trigger by rising edge)
++)))|OK
++
++**Downlink Command: 0x06**
++
  Format: Command Code (0x06) followed by 3 bytes.
  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
--* Example 1: Downlink Payload: 06000000       ~/~/  Turn off interrupt mode
--* Example 2: Downlink Payload: 06000003      ~/~/   Set the interrupt mode to rising edge trigger
++* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
++* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
--=== 3.3.3 Set the output time ===
++== 3.3 Set the output time ==
++
++
  Feature, Control the output 3V3 , 5V or 12V.
--(% style="color:blue" %)**AT Command: AT+3V3T**
++**AT Command: AT+3V3T**
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:474px" %)
--|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 201px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 119px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=?|(% style="background-color:#f2f2f2; width:201px" %)Show 3V3 open time.|(% style="background-color:#f2f2f2; width:116px" %)(((
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|(% style="width:156px" %)**Command Example**|(% style="width:236px" %)**Function**|(% style="width:117px" %)**Response**
++|(% style="width:156px" %)AT+3V3T=?|(% style="width:236px" %)Show 3V3 open time.|(% style="width:117px" %)(((
++
  OK
  )))
--|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=0|(% style="background-color:#f2f2f2; width:201px" %)Normally open 3V3 power supply.|(% style="background-color:#f2f2f2; width:116px" %)(((
++|(% style="width:156px" %)AT+3V3T=0|(% style="width:236px" %)Normally open 3V3 power supply.|(% style="width:117px" %)(((
  OK
++
  default setting
  )))
--|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=1000|(% style="background-color:#f2f2f2; width:201px" %)Close after a delay of 1000 milliseconds.|(% style="background-color:#f2f2f2; width:116px" %)(((
++|(% style="width:156px" %)AT+3V3T=1000|(% style="width:236px" %)Close after a delay of 1000 milliseconds.|(% style="width:117px" %)(((
  OK
++
++
  )))
--|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=65535|(% style="background-color:#f2f2f2; width:201px" %)Normally closed 3V3 power supply.|(% style="background-color:#f2f2f2; width:116px" %)(((
++|(% style="width:156px" %)AT+3V3T=65535|(% style="width:236px" %)Normally closed 3V3 power supply.|(% style="width:117px" %)(((
  OK
++
++
  )))
--(% style="color:blue" %)**AT Command: AT+5VT**
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:470px" %)
--|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 119px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=?|(% style="background-color:#f2f2f2; width:196px" %)Show 5V open time.|(% style="background-color:#f2f2f2; width:114px" %)(((
++**AT Command: AT+5VT**
++
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|(% style="width:158px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:119px" %)**Response**
++|(% style="width:158px" %)AT+5VT=?|(% style="width:232px" %)Show 5V open time.|(% style="width:119px" %)(((
++
  OK
  )))
--|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=0|(% style="background-color:#f2f2f2; width:196px" %)Normally closed 5V power supply.|(% style="background-color:#f2f2f2; width:114px" %)(((
++|(% style="width:158px" %)AT+5VT=0|(% style="width:232px" %)Normally closed 5V power supply.|(% style="width:119px" %)(((
  OK
++
  default setting
  )))
--|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=1000|(% style="background-color:#f2f2f2; width:196px" %)Close after a delay of 1000 milliseconds.|(% style="background-color:#f2f2f2; width:114px" %)(((
++|(% style="width:158px" %)AT+5VT=1000|(% style="width:232px" %)Close after a delay of 1000 milliseconds.|(% style="width:119px" %)(((
  OK
++
++
  )))
--|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=65535|(% style="background-color:#f2f2f2; width:196px" %)Normally open 5V power supply.|(% style="background-color:#f2f2f2; width:114px" %)(((
++|(% style="width:158px" %)AT+5VT=65535|(% style="width:232px" %)Normally open 5V power supply.|(% style="width:119px" %)(((
  OK
++
++
  )))
--(% style="color:blue" %)**AT Command: AT+12VT**
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:443px" %)
--|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 199px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 88px;background-color:#D9E2F3;color:#0070C0" %)**Response**
--|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=?|(% style="background-color:#f2f2f2; width:199px" %)Show 12V open time.|(% style="background-color:#f2f2f2; width:83px" %)(((
++**AT Command: AT+12VT**
++
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|(% style="width:156px" %)**Command Example**|(% style="width:268px" %)**Function**|**Response**
++|(% style="width:156px" %)AT+12VT=?|(% style="width:268px" %)Show 12V open time.|(((
++
  OK
  )))
--|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=0|(% style="background-color:#f2f2f2; width:199px" %)Normally closed 12V power supply.|(% style="background-color:#f2f2f2; width:83px" %)OK
--|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=500|(% style="background-color:#f2f2f2; width:199px" %)Close after a delay of 500 milliseconds.|(% style="background-color:#f2f2f2; width:83px" %)(((
++|(% style="width:156px" %)AT+12VT=0|(% style="width:268px" %)Normally closed 12V power supply.|OK
++|(% style="width:156px" %)AT+12VT=500|(% style="width:268px" %)Close after a delay of 500 milliseconds.|(((
  OK
++
++
  )))
--(% style="color:blue" %)**Downlink Command: 0x07**
++**Downlink Command: 0x07**
++
  Format: Command Code (0x07) followed by 3 bytes.
  The first byte is which power, the second and third bytes are the time to turn on.
--* Example 1: Downlink Payload: 070101F4  **~-~-->**   AT+3V3T=500
--* Example 2: Downlink Payload: 0701FFFF   **~-~-->**  AT+3V3T=65535
--* Example 3: Downlink Payload: 070203E8  **~-~-->**  AT+5VT=1000
--* Example 4: Downlink Payload: 07020000  **~-~-->**  AT+5VT=0
--* Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
--* Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
++* Example 1: Downlink Payload: 070101F4  -> AT+3V3T=500
++* Example 2: Downlink Payload: 0701FFFF   -> AT+3V3T=65535
++* Example 3: Downlink Payload: 070203E8  -> AT+5VT=1000
++* Example 4: Downlink Payload: 07020000  -> AT+5VT=0
++* Example 5: Downlink Payload: 070301F4  -> AT+12VT=500
++* Example 6: Downlink Payload: 07030000  -> AT+12VT=0
--=== 3.3.4 Set the Probe Model ===
--Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
++== 3.4 Set the Probe Model ==
--(% style="color:blue" %)**AT Command: AT** **+PROBE**
--AT+PROBE=aabb
++**AT Command: AT** **+PROBE**
--When aa=00, it is the water depth mode, and the current is converted into the water depth value; bb is the probe at a depth of several meters.
++(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
++|(% style="width:157px" %)**Command Example**|(% style="width:267px" %)**Function**|**Response**
++|(% style="width:157px" %)AT +PROBE =?|(% style="width:267px" %)Get or Set the probe model.|(((
++0
--When aa=01, it is the pressure mode, which converts the current into a pressure value;
++OK
++)))
++|(% style="width:157px" %)AT +PROBE =0003|(% style="width:267px" %)Set water depth sensor mode, 3m type.|OK
++|(% style="width:157px" %)AT +PROBE =0101|(% style="width:267px" %)Set pressure transmitters mode, first type.|(((
++OK
--bb represents which type of pressure sensor it is.
--
--(A->01,B->02,C->03,D->04,E->05,F->06,G->07,H->08,I->09,J->0A,K->0B,L->0C)
--
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:269px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Response**
--|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=?|(% style="background-color:#f2f2f2; width:269px" %)Get or Set the probe model.|(% style="background-color:#f2f2f2" %)0
++
++)))
++|(% style="width:157px" %)AT +PROBE =0000|(% style="width:267px" %)Initial state, no settings.|(((
  OK
--|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0003|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 3m type.|(% style="background-color:#f2f2f2" %)OK
--|(% style="background-color:#f2f2f2; width:154px" %)(((
--AT+PROBE=000A
--)))|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 10m type.|(% style="background-color:#f2f2f2" %)OK
--|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0064|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 100m type.|(% style="background-color:#f2f2f2" %)OK
--|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0101|(% style="background-color:#f2f2f2; width:269px" %)Set pressure transmitters mode, first type(A).|(% style="background-color:#f2f2f2" %)OK
--|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0000|(% style="background-color:#f2f2f2; width:269px" %)Initial state, no settings.|(% style="background-color:#f2f2f2" %)OK
--(% style="color:blue" %)**Downlink Command: 0x08**
++
++)))
++**Downlink Command: 0x08**
++
  Format: Command Code (0x08) followed by 2 bytes.
--* Example 1: Downlink Payload: 080003  **~-~-->**   AT+PROBE=0003
--* Example 2: Downlink Payload: 080101  **~-~-->**   AT+PROBE=0101
++* Example 1: Downlink Payload: 080003  -> AT+PROBE=0003
++* Example 2: Downlink Payload: 080101  -> AT+PROBE=0101
--=== 3.3.5 Multiple collections are one uplink（Since firmware V1.1） ===
--Added AT+STDC command to collect the voltage of VDC_INPUT multiple times and upload it at one time.
++= 4. Battery & how to replace =
--(% style="color:blue" %)**AT Command: AT** **+STDC**
++== 4.1 Battery Type ==
--AT+STDC=aa,bb,bb
--(% style="color:#037691" %)**aa:**(%%)
--**0:** means disable this function and use TDC to send packets.
--**1:** means enable this function, use the method of multiple acquisitions to send packets.
--(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
--(% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
++PS-LB is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>https://www.dropbox.com/sh/w9l2oa3ytpculph/AAAPtt-apH4lYfCj-2Y6lHvQa?dl=0]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
--(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
--|(% style="background-color:#d9e2f3; color:#0070c0; width:160px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:215px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Response**
--|(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=?|(% style="background-color:#f2f2f2; width:215px" %)Get the mode of multiple acquisitions and one uplink.|(% style="background-color:#f2f2f2" %)1,10,18
--OK
--|(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=1,10,18|(% style="background-color:#f2f2f2; width:215px" %)Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(% style="background-color:#f2f2f2" %)(((
--Attention:Take effect after ATZ
--OK
--)))
--|(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=0, 0,0|(% style="background-color:#f2f2f2; width:215px" %)(((
--Use the TDC interval to send packets.(default)
++The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
--
--)))|(% style="background-color:#f2f2f2" %)(((
--Attention:Take effect after ATZ
++[[image:1675146710956-626.png]]
--OK
--)))
--(% style="color:blue" %)**Downlink Command: 0xAE**
++Minimum Working Voltage for the PS-LB:
--Format: Command Code (0x08) followed by 5 bytes.
++PS-LB:  2.45v ~~ 3.6v
--* Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**   AT+STDC=1,600,18
--= 4. Battery & Power Consumption =
++== 4.2 Replace Battery ==
--PS-LB uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
++Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
--[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
++And make sure the positive and negative pins match.
--= 5. OTA firmware update =
++== 4.3 Power Consumption Analyze ==
--Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
++Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
--= 6. FAQ =
++Instruction to use as below:
--== 6.1 How to use AT Command  via UART to access device? ==
++**Step 1:** Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
--See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
++[[https:~~/~~/www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0>>https://www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0]]
--== 6.2 How to update firmware via UART port? ==
++**Step 2:** Open it and choose
++* Product Model
++* Uplink Interval
++* Working Mode
--See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
++And the Life expectation in difference case will be shown on the right.
++[[image:1675146895108-304.png]]
--== 6.3 How to change the LoRa Frequency Bands/Region? ==
++The battery related documents as below:
--You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
--When downloading the images, choose the required image file for download.
++* [[Battery Dimension>>https://www.dropbox.com/s/ox5g9njwjle7aw3/LSN50-Battery-Dimension.pdf?dl=0]],
++* [[Lithium-Thionyl Chloride Battery datasheet, Tech Spec>>https://www.dropbox.com/sh/d4oyfnp8o94180o/AABQewCNSh5GPeQH86UxRgQQa?dl=0]]
++* [[Lithium-ion Battery-Capacitor datasheet>>https://www.dropbox.com/s/791gjes2lcbfi1p/SPC_1520_datasheet.jpg?dl=0]], [[Tech Spec>>https://www.dropbox.com/s/4pkepr9qqqvtzf2/SPC1520%20Technical%20Specification20171123.pdf?dl=0]]
++[[image:image-20230131145708-3.png]]
--= 7. Troubleshooting =
--== 7.1 Water Depth Always shows 0 in payload ==
++=== 4.3.1 Battery Note ===
--If your device's IDC_intput_mA is normal, but your reading always shows 0, please refer to the following points:
++The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
--~1. Please set it to mod1
--2. Please set the command [[AT+PROBE>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/PS-LB%20--%20LoRaWAN%20Pressure%20Sensor/#H3.3.4SettheProbeModel]] according to the model of your sensor
++=== 4.3.2 Replace the battery ===
--3. Check the connection status of the sensor
++You can change the battery in the PS-LB.The type of battery is not limited as long as the output is between 3v to 3.6v.  On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
++The default battery pack of PS-LB includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
++
++
++= 5. Remote Configure device =
++
++== 5.1 Connect via BLE ==
++
++
++Please see this instruction for how to configure via BLE: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]]
++
++
++== 5.2 AT Command Set ==
++
++
++
++= 6. OTA firmware update =
++
++
++Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
++
++
++= 7. FAQ =
++
++== 7.1 How to use AT Command to access device? ==
++
++
++See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
++
++
++== 7.2 How to update firmware via UART port? ==
++
++
++See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
++
++
++== 7.3 How to change the LoRa Frequency Bands/Region? ==
++
++
++You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
++When downloading the images, choose the required image file for download.
++
++
  = 8. Order Info =
@@ -861,11 +861,11 @@
  = 9. Packing Info =
--(% style="color:#037691" %)**Package Includes**:
++**Package Includes**:
  * PS-LB LoRaWAN Pressure Sensor
--(% style="color:#037691" %)**Dimension and weight**:
++**Dimension and weight**:
  * Device Size: cm
  * Device Weight: g
@@ -872,11 +872,12 @@
  * Package Size / pcs : cm
  * Weight / pcs : g
++
++
  = 10. Support =
  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
++* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
--* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
--

image-20230201090514-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-560.9 KB

Content

image-20230220171300-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-98.0 KB

Content

image-20230222174559-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-19.4 KB

Content

image-20230225154759-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Edwin

Size

...	...	@@ -1,1 +1,0 @@
1		-468.9 KB

Content

image-20230426085320-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-190.0 KB

Content

image-20231120110833-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-255.7 KB

Content

image-20231120110949-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-217.3 KB

Content

image-20231120111036-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-273.4 KB

Content

image-20231120111226-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-340.3 KB

Content

image-20240109154009-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-297.0 KB

Content

image-20240109154121-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-414.4 KB

Content

image-20240109154227-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-342.4 KB

Content

image-20240109154731-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-511.6 KB

Content

Changes for page PS-LB/LS -- LoRaWAN Air Water Pressure Sensor User Manual

Summary

Details

Applications

Navigation