Last modified by Xiaoling on 2025/04/27 10:31
<
From version < 53.4 >
edited by Xiaoling
on 2023/04/03 11:15
To version < 45.3 >
edited by Xiaoling
on 2023/02/21 15:24
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -58,7 +58,6 @@
58 58  * Uplink on periodically
59 59  * Downlink to change configure
60 60  * 8500mAh Battery for long term use
61 -* Controllable 3.3v,5v and 12v output to power external sensor
62 62  
63 63  == 1.3 Specification ==
64 64  
... ... @@ -133,8 +133,11 @@
133 133  * Measuring Range: Measure range can be customized, up to 100m.
134 134  * Accuracy: 0.2% F.S
135 135  * Long-Term Stability: ±0.2% F.S / Year
135 +* Overload 200% F.S
136 +* Zero Temperature Drift: ±2% F.S)
137 +* FS Temperature Drift: ±2% F.S
136 136  * Storage temperature: -30℃~~80℃
137 -* Operating temperature: 0℃~~50℃
139 +* Operating temperature: -40℃~~85℃
138 138  * Material: 316 stainless steels
139 139  
140 140  == 1.5 Probe Dimension ==
... ... @@ -194,18 +194,18 @@
194 194  [[image:1675071855856-879.png]]
195 195  
196 196  
197 -(% border="1" cellspacing="4" style="width:510px" %)
198 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
199 -|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
199 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
200 +|=(% style="width: 167px;" %)**Behavior on ACT**|=(% style="width: 117px;" %)**Function**|=(% style="width: 225px;" %)**Action**
201 +|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
200 200  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
201 201  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
202 202  )))
203 -|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
204 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
205 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
205 +|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
206 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
207 +(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
206 206  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
207 207  )))
208 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB-NA is in Deep Sleep Mode.
210 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
209 209  
210 210  == 1.9 Pin Mapping ==
211 211  
... ... @@ -301,8 +301,18 @@
301 301  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
302 302  
303 303  
306 +
304 304  == 2.3 ​Uplink Payload ==
305 305  
309 +
310 +Uplink payloads have two types:
311 +
312 +* Distance Value: Use FPORT=2
313 +* Other control commands: Use other FPORT fields.
314 +
315 +The application server should parse the correct value based on FPORT settings.
316 +
317 +
306 306  === 2.3.1 Device Status, FPORT~=5 ===
307 307  
308 308  
... ... @@ -311,10 +311,10 @@
311 311  Users can also use the downlink command(0x26 01) to ask PS-LB to resend this uplink.
312 312  
313 313  
314 -(% border="1" cellspacing="4" style="width:510px" %)
315 -|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
316 -|(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
317 -|(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
326 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
327 +|(% colspan="6" %)**Device Status (FPORT=5)**
328 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
329 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
318 318  
319 319  Example parse in TTNv3
320 320  
... ... @@ -380,18 +380,32 @@
380 380  Uplink payload includes in total 9 bytes.
381 381  
382 382  
383 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
395 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
384 384  |(% style="width:97px" %)(((
385 385  **Size(bytes)**
386 386  )))|(% style="width:48px" %)**2**|(% style="width:71px" %)**2**|(% style="width:98px" %)**2**|(% style="width:73px" %)**2**|(% style="width:122px" %)**1**
387 -|(% style="width:97px" %)**Value**|(% style="width:48px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.5ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.607E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.707E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.8IN126IN226INTpin"]]
399 +|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
388 388  
389 389  [[image:1675144608950-310.png]]
390 390  
391 391  
392 -=== 2.3.3 Battery Info ===
404 +=== 2.3.3 Sensor value, FPORT~=7 ===
393 393  
394 394  
407 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:508.222px" %)
408 +|(% style="width:94px" %)(((
409 +**Size(bytes)**
410 +)))|(% style="width:43px" %)2|(% style="width:367px" %)n
411 +|(% style="width:94px" %)**Value**|(% style="width:43px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:367px" %)(((
412 +Voltage value, each 2 bytes is a set of voltage values.
413 +)))
414 +
415 +[[image:image-20230220171300-1.png||height="207" width="863"]]
416 +
417 +
418 +=== 2.3.4 Battery Info ===
419 +
420 +
395 395  Check the battery voltage for PS-LB.
396 396  
397 397  Ex1: 0x0B45 = 2885mV
... ... @@ -399,27 +399,26 @@
399 399  Ex2: 0x0B49 = 2889mV
400 400  
401 401  
402 -=== 2.3.4 Probe Model ===
428 +=== 2.3.5 Probe Model ===
403 403  
404 404  
405 -PS-LB has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe. 
431 +PS-LB has different kind of probe, 0~~20mA represent the full scale of the measuring range. So a 15mA output means different meaning for different probe. 
406 406  
407 407  
408 408  For example.
409 409  
410 410  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
411 -|**Part Number**|**Probe Used**|**4~~20mA scale**|**Example: 12mA meaning**
412 -|PS-LB-I3|immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
413 -|PS-LB-I5|immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
414 -|PS-LB-T20-B|T20 threaded probe|0~~1MPa|0.5MPa air / gas or water pressure
437 +|(% style="width:111px" %)**Part Number**|(% style="width:158px" %)**Probe Used**|**0~~20mA scale**|**Example: 10mA meaning**
438 +|(% style="width:111px" %)PS-LB-I3|(% style="width:158px" %)immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
439 +|(% style="width:111px" %)PS-LB-I5|(% style="width:158px" %)immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
415 415  
416 -The probe model field provides the convenient for server to identical how it should parse the 4~~20mA sensor value and get the correct value.
441 +The probe model field provides the convenient for server to identical how it should parse the 0~~20mA sensor value and get the correct value.
417 417  
418 418  
419 -=== 2.3.5 0~~20mA value (IDC_IN) ===
444 +=== 2.3.6 0~~20mA value (IDC_IN) ===
420 420  
421 421  
422 -The output value from **Pressure Probe**, use together with Probe Model to get the pressure value or water level.
447 +The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
423 423  
424 424  (% style="color:#037691" %)**Example**:
425 425  
... ... @@ -426,14 +426,9 @@
426 426  27AE(H) = 10158 (D)/1000 = 10.158mA.
427 427  
428 428  
429 -Instead of pressure probe, User can also connect a general 4~~20mA in this port to support different types of 4~~20mA sensors. below is the connection example:
454 +=== 2.3.7 0~~30V value ( pin VDC_IN) ===
430 430  
431 -[[image:image-20230225154759-1.png||height="408" width="741"]]
432 432  
433 -
434 -=== 2.3.6 0~~30V value ( pin VDC_IN) ===
435 -
436 -
437 437  Measure the voltage value. The range is 0 to 30V.
438 438  
439 439  (% style="color:#037691" %)**Example**:
... ... @@ -441,7 +441,7 @@
441 441  138E(H) = 5006(D)/1000= 5.006V
442 442  
443 443  
444 -=== 2.3.7 IN1&IN2&INT pin ===
464 +=== 2.3.8 IN1&IN2&INT pin ===
445 445  
446 446  
447 447  IN1 and IN2 are used as digital input pins.
... ... @@ -464,24 +464,6 @@
464 464  0x01: Interrupt Uplink Packet.
465 465  
466 466  
467 -=== (% id="cke_bm_109176S" style="display:none" %) (%%)2.3.8 Sensor value, FPORT~=7 ===
468 -
469 -
470 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:508.222px" %)
471 -|(% style="width:94px" %)(((
472 -**Size(bytes)**
473 -)))|(% style="width:43px" %)2|(% style="width:367px" %)n
474 -|(% style="width:94px" %)**Value**|(% style="width:43px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:367px" %)(((
475 -Voltage value, each 2 bytes is a set of voltage values.
476 -)))
477 -
478 -[[image:image-20230220171300-1.png||height="207" width="863"]]
479 -
480 -Multiple sets of data collected are displayed in this form：
481 -
482 -[voltage value1], [voltage value2], [voltage value3],…[voltage value n/2]
483 -
484 -
485 485  === 2.3.9 ​Decode payload in The Things Network ===
486 486  
487 487  
... ... @@ -562,35 +562,35 @@
562 562  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
563 563  
564 564  
565 -= 3. Configure PS-LB =
566 566  
567 -== 3.1 Configure Methods ==
568 += 3. Configure PS-LB via AT Command or LoRaWAN Downlink =
568 568  
569 -PS-LB-NA supports below configure method:
570 570  
571 -* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
572 -* AT Command via UART Connection : See [[FAQ>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/#H7.FAQ]].
573 -* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
571 +Use can configure PS-LB via AT Command or LoRaWAN Downlink.
574 574  
575 -== 3.2 General Commands ==
573 +* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
574 +* LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
576 576  
576 +There are two kinds of commands to configure PS-LB, they are:
577 +
578 +* (% style="color:#037691" %)**General Commands**
579 +
577 577  These commands are to configure:
578 578  
579 579  * General system settings like: uplink interval.
580 580  * LoRaWAN protocol & radio related command.
581 581  
582 -They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
585 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
583 583  
584 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
587 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
585 585  
586 586  
590 +* (% style="color:#037691" %)**Commands special design for PS-LB**
587 587  
588 -== 3.3 Commands special design for PS-LB ==
589 -
590 590  These commands only valid for PS-LB, as below:
591 591  
592 592  
593 -=== 3.3.1 Set Transmit Interval Time ===
595 +== 3.1 Set Transmit Interval Time ==
594 594  
595 595  
596 596  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -618,7 +618,7 @@
618 618  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
619 619  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
620 620  
621 -=== 3.3.2 Set Interrupt Mode ===
623 +== 3.2 Set Interrupt Mode ==
622 622  
623 623  
624 624  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -630,14 +630,14 @@
630 630  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
631 631  0
632 632  OK
633 -the mode is 0 =Disable Interrupt
635 +the mode is 0 = No interruption
634 634  )))
635 635  |(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
636 636  Set Transmit Interval
637 -0. (Disable Interrupt),
638 -~1. (Trigger by rising and falling edge)
639 -2. (Trigger by falling edge)
640 -3. (Trigger by rising edge)
639 +~1. (Disable Interrupt),
640 +2. (Trigger by rising and falling edge)
641 +3. (Trigger by falling edge)
642 +4. (Trigger by rising edge)
641 641  )))|(% style="width:157px" %)OK
642 642  
643 643  (% style="color:blue" %)**Downlink Command: 0x06**
... ... @@ -649,7 +649,7 @@
649 649  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
650 650  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
651 651  
652 -=== 3.3.3 Set the output time ===
654 +== 3.3 Set the output time ==
653 653  
654 654  
655 655  Feature, Control the output 3V3 , 5V or 12V.
... ... @@ -718,111 +718,163 @@
718 718  * Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
719 719  * Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
720 720  
721 -=== 3.3.4 Set the Probe Model ===
723 +== 3.4 Set the Probe Model ==
722 722  
723 723  
724 -Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
726 +(% style="color:blue" %)**AT Command: AT** **+PROBE**
725 725  
726 -**AT Command: AT** **+PROBE**
728 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:448px" %)
729 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 204px;" %)**Function**|=(% style="width: 85px;" %)**Response**
730 +|(% style="width:154px" %)AT +PROBE =?|(% style="width:204px" %)Get or Set the probe model.|(% style="width:85px" %)(((
731 +0
732 +OK
733 +)))
734 +|(% style="width:154px" %)AT +PROBE =0003|(% style="width:204px" %)Set water depth sensor mode, 3m type.|(% style="width:85px" %)OK
735 +|(% style="width:154px" %)AT +PROBE =0101|(% style="width:204px" %)Set pressure transmitters mode, first type.|(% style="width:85px" %)(((
736 +OK
737 +)))
738 +|(% style="width:154px" %)AT +PROBE =0000|(% style="width:204px" %)Initial state, no settings.|(% style="width:85px" %)(((
739 +OK
740 +)))
727 727  
728 -AT+PROBE=aabb
742 +(% style="color:blue" %)**Downlink Command: 0x08**
729 729  
730 -When aa=00, it is the water depth mode, and the current is converted into the water depth value; bb is the probe at a depth of several meters.
744 +Format: Command Code (0x08) followed by 2 bytes.
731 731  
732 -When aa=01, it is the pressure mode, which converts the current into a pressure value;
746 +* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
747 +* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
733 733  
734 -bb represents which type of pressure sensor it is.
749 +== 3.5 Multiple collections are one uplink（Since firmware V1.1） ==
735 735  
736 -(A->01,B->02,C->03,D->04,E->05,F->06,G->07,H->08,I->09,J->0A,K->0B,L->0C)
737 737  
752 +Added AT+STDC command to collect the voltage of VDC_INPUT multiple times and upload it at one time.
753 +
754 +(% style="color:blue" %)**AT Command: AT** **+STDC**
755 +
738 738  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
739 -|**Command Example**|**Function**|**Response**
740 -|AT +PROBE =?|Get or Set the probe model.|0
757 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 137px;" %)**Function**|=**Response**
758 +|(% style="width:156px" %)AT+STDC=?|(% style="width:137px" %)(((
759 +Get the mode of multiple acquisitions and one uplink
760 +)))|(((
761 +1,10,18
741 741  OK
742 -|AT +PROBE =0003|Set water depth sensor mode, 3m type.|OK
743 -|(((
744 -AT +PROBE =000A
763 +)))
764 +|(% style="width:156px" %)AT+STDC=1,10,18|(% style="width:137px" %)Set the mode of multiple acquisitions and one uplink|(((
765 +OK
766 +**(% style="color:#037691" %)aa:**(%%)
767 +**0** means disable this function and use TDC to send packets.
768 +**1** means enable this function, use the method of multiple acquisitions to send packets.
769 +**(% style="color:#037691" %)bb:**(%%) Each collection interval (s), the value is 1~~65535
770 +**(% style="color:#037691" %)cc:**(%%)the number of collection times, the value is 1~~120
771 +)))
745 745  
746 -
747 -)))|Set water depth sensor mode, 10m type.|OK
748 -|AT +PROBE =0101|Set pressure transmitters mode, first type(A).|OK
749 -|AT +PROBE =0000|Initial state, no settings.|OK
773 +(% style="color:blue" %)**Downlink Command: 0xAE**
750 750  
751 -**Downlink Command: 0x08**
775 +Format: Command Code (0x08) followed by 5 bytes.
752 752  
753 -Format: Command Code (0x08) followed by 2 bytes.
777 +* Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
754 754  
755 -* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
756 -* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
779 += 4. Battery & how to replace =
757 757  
758 -=== 3.3.5 Multiple collections are one uplink（Since firmware V1.1） ===
781 +== 4.1 Battery Type ==
759 759  
760 760  
761 -Added AT+STDC command to collect the voltage of VDC_INPUT multiple times and upload it at one time.
784 +PS-LB is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>https://www.dropbox.com/sh/w9l2oa3ytpculph/AAAPtt-apH4lYfCj-2Y6lHvQa?dl=0]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
762 762  
763 -(% style="color:blue" %)**AT Command: AT** **+STDC**
786 +The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
764 764  
765 -AT+STDC=aa,bb,bb
788 +[[image:1675146710956-626.png]]
766 766  
767 -(% style="color:#037691" %)**aa:**(%%)
768 -**0:** means disable this function and use TDC to send packets.
769 -**1:** means enable this function, use the method of multiple acquisitions to send packets.
770 -(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
771 -(% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
772 772  
773 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
774 -|**Command Example**|**Function**|**Response**
775 -|AT+STDC=?|Get the mode of multiple acquisitions and one uplink.|1,10,18
776 -OK
777 -|AT+STDC=1,10,18|Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(((
778 -Attention:Take effect after ATZ
791 +Minimum Working Voltage for the PS-LB:
779 779  
780 -OK
781 -)))
782 -|AT+STDC=0, 0,0|(((
783 -Use the TDC interval to send packets.(default)
793 +PS-LB:  2.45v ~~ 3.6v
784 784  
785 -
786 -)))|(((
787 -Attention:Take effect after ATZ
788 788  
789 -OK
790 -)))
796 +== 4.2 Replace Battery ==
791 791  
792 -(% style="color:blue" %)**Downlink Command: 0xAE**
793 793  
794 -Format: Command Code (0x08) followed by 5 bytes.
799 +Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
795 795  
796 -* Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
801 +And make sure the positive and negative pins match.
797 797  
798 -= 4. Battery & Power Consumption =
799 799  
800 -PS-LB-NA uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
804 +== 4.3 Power Consumption Analyze ==
801 801  
802 - [[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
803 803  
807 +Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
804 804  
805 -= 5. OTA firmware update =
809 +Instruction to use as below:
806 806  
811 +(% style="color:blue" %)**Step 1:**(%%) Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0>>https://www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0]]
807 807  
813 +(% style="color:blue" %)**Step 2:**(%%) Open it and choose
814 +
815 +* Product Model
816 +* Uplink Interval
817 +* Working Mode
818 +
819 +And the Life expectation in difference case will be shown on the right.
820 +
821 +[[image:1675146895108-304.png]]
822 +
823 +
824 +The battery related documents as below:
825 +
826 +* [[Battery Dimension>>https://www.dropbox.com/s/ox5g9njwjle7aw3/LSN50-Battery-Dimension.pdf?dl=0]],
827 +* [[Lithium-Thionyl Chloride Battery datasheet, Tech Spec>>https://www.dropbox.com/sh/d4oyfnp8o94180o/AABQewCNSh5GPeQH86UxRgQQa?dl=0]]
828 +* [[Lithium-ion Battery-Capacitor datasheet>>https://www.dropbox.com/s/791gjes2lcbfi1p/SPC_1520_datasheet.jpg?dl=0]], [[Tech Spec>>https://www.dropbox.com/s/4pkepr9qqqvtzf2/SPC1520%20Technical%20Specification20171123.pdf?dl=0]]
829 +
830 +[[image:image-20230131145708-3.png]]
831 +
832 +
833 +=== 4.3.1 ​Battery Note ===
834 +
835 +
836 +The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
837 +
838 +
839 +=== 4.3.2 Replace the battery ===
840 +
841 +
842 +You can change the battery in the PS-LB.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
843 +
844 +The default battery pack of PS-LB includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
845 +
846 +
847 += 5. Remote Configure device =
848 +
849 +== 5.1 Connect via BLE ==
850 +
851 +
852 +Please see this instruction for how to configure via BLE: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]]
853 +
854 +
855 +== 5.2 AT Command Set ==
856 +
857 +
858 +
859 += 6. OTA firmware update =
860 +
861 +
808 808  Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
809 809  
810 810  
811 -= 6. FAQ =
865 += 7. FAQ =
812 812  
813 -== 6.1 How to use AT Command via UART to access device? ==
867 +== 7.1 How to use AT Command to access device? ==
814 814  
815 815  
816 816  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
817 817  
818 818  
819 -== 6.2 How to update firmware via UART port? ==
873 +== 7.2 How to update firmware via UART port? ==
820 820  
821 821  
822 822  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
823 823  
824 824  
825 -== 6.3 How to change the LoRa Frequency Bands/Region? ==
879 +== 7.3 How to change the LoRa Frequency Bands/Region? ==
826 826  
827 827  
828 828  You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
... ... @@ -829,13 +829,13 @@
829 829  When downloading the images, choose the required image file for download. ​
830 830  
831 831  
832 -= 7. Order Info =
886 += 8. Order Info =
833 833  
834 834  
835 835  [[image:image-20230131153105-4.png]]
836 836  
837 837  
838 -= 8. ​Packing Info =
892 += 9. ​Packing Info =
839 839  
840 840  
841 841  (% style="color:#037691" %)**Package Includes**:
... ... @@ -849,7 +849,7 @@
849 849  * Package Size / pcs : cm
850 850  * Weight / pcs : g
851 851  
852 -= 9. Support =
906 += 10. Support =
853 853  
854 854  
855 855  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20230222174559-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20230225154759-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -468.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0