Last modified by Xiaoling on 2025/04/27 10:31
<
From version < 53.2 >
edited by Xiaoling
on 2023/04/03 10:59
To version < 42.28 >
edited by Xiaoling
on 2023/01/31 16:47
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,33 +16,22 @@
16 16  == 1.1 What is LoRaWAN Pressure Sensor ==
17 17  
18 18  
19 -(((
20 20  The Dragino PS-LB series sensors are (% style="color:blue" %)**LoRaWAN Pressure Sensor**(%%) for Internet of Things solution. PS-LB can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
21 -)))
22 22  
23 -(((
24 24  The PS-LB series sensors include (% style="color:blue" %)**Thread Installation Type**(%%) and (% style="color:blue" %)**Immersion Type**(%%), it supports different pressure range which can be used for different measurement requirement.
25 -)))
26 26  
27 -(((
28 28  The LoRa wireless technology used in PS-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
29 -)))
30 30  
31 -(((
32 32  PS-LB supports BLE configure and wireless OTA update which make user easy to use.
33 -)))
34 34  
35 -(((
36 36  PS-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
37 -)))
38 38  
39 -(((
40 40  Each PS-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
41 -)))
42 42  
43 43  [[image:1675071321348-194.png]]
44 44  
45 45  
34 +
46 46  == 1.2 ​Features ==
47 47  
48 48  
... ... @@ -58,7 +58,6 @@
58 58  * Uplink on periodically
59 59  * Downlink to change configure
60 60  * 8500mAh Battery for long term use
61 -* Controllable 3.3v,5v and 12v output to power external sensor
62 62  
63 63  == 1.3 Specification ==
64 64  
... ... @@ -133,8 +133,11 @@
133 133  * Measuring Range: Measure range can be customized, up to 100m.
134 134  * Accuracy: 0.2% F.S
135 135  * Long-Term Stability: ±0.2% F.S / Year
124 +* Overload 200% F.S
125 +* Zero Temperature Drift: ±2% F.S)
126 +* FS Temperature Drift: ±2% F.S
136 136  * Storage temperature: -30℃~~80℃
137 -* Operating temperature: 0℃~~50℃
128 +* Operating temperature: -40℃~~85℃
138 138  * Material: 316 stainless steels
139 139  
140 140  == 1.5 Probe Dimension ==
... ... @@ -141,6 +141,7 @@
141 141  
142 142  
143 143  
135 +
144 144  == 1.6 Application and Installation ==
145 145  
146 146  === 1.6.1 Thread Installation Type ===
... ... @@ -194,20 +194,19 @@
194 194  [[image:1675071855856-879.png]]
195 195  
196 196  
197 -(% border="1" cellspacing="4" style="width:510px" %)
198 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
199 -|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
189 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
190 +|=(% style="width: 150px;" %)**Behavior on ACT**|=(% style="width: 90px;" %)**Function**|=**Action**
191 +|(% style="width:260px" %)Pressing ACT between 1s < time < 3s|(% style="width:100px" %)Send an uplink|(((
200 200  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
201 201  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
202 202  )))
203 -|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
204 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
205 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
195 +|(% style="width:138px" %)Pressing ACT for more than 3s|(% style="width:100px" %)Active Device|(((
196 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
197 +(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
206 206  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
207 207  )))
208 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB-NA is in Deep Sleep Mode.
200 +|(% style="width:138px" %)Fast press ACT 5 times.|(% style="width:100px" %)Deactivate Device|red led will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
209 209  
210 -
211 211  == 1.9 Pin Mapping ==
212 212  
213 213  
... ... @@ -232,6 +232,8 @@
232 232  == 1.11 Mechanical ==
233 233  
234 234  
226 +
227 +
235 235  [[image:1675143884058-338.png]]
236 236  
237 237  
... ... @@ -249,6 +249,7 @@
249 249  The PS-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
250 250  
251 251  
245 +
252 252  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
253 253  
254 254  
... ... @@ -302,8 +302,18 @@
302 302  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
303 303  
304 304  
299 +
305 305  == 2.3 ​Uplink Payload ==
306 306  
302 +
303 +Uplink payloads have two types:
304 +
305 +* Distance Value: Use FPORT=2
306 +* Other control commands: Use other FPORT fields.
307 +
308 +The application server should parse the correct value based on FPORT settings.
309 +
310 +
307 307  === 2.3.1 Device Status, FPORT~=5 ===
308 308  
309 309  
... ... @@ -314,8 +314,8 @@
314 314  
315 315  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
316 316  |(% colspan="6" %)**Device Status (FPORT=5)**
317 -|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
318 -|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
321 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|**1**|**1**|**2**
322 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|Frequency Band|Sub-band|BAT
319 319  
320 320  Example parse in TTNv3
321 321  
... ... @@ -385,11 +385,12 @@
385 385  |(% style="width:97px" %)(((
386 386  **Size(bytes)**
387 387  )))|(% style="width:48px" %)**2**|(% style="width:71px" %)**2**|(% style="width:98px" %)**2**|(% style="width:73px" %)**2**|(% style="width:122px" %)**1**
388 -|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.5ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.607E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.707E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.8IN126IN226INTpin"]]
392 +|(% style="width:97px" %)**Value**|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
389 389  
390 390  [[image:1675144608950-310.png]]
391 391  
392 392  
397 +
393 393  === 2.3.3 Battery Info ===
394 394  
395 395  
... ... @@ -403,24 +403,23 @@
403 403  === 2.3.4 Probe Model ===
404 404  
405 405  
406 -PS-LB has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe. 
411 +PS-LB has different kind of probe, 0~~20mA represent the full scale of the measuring range. So a 15mA output means different meaning for different probe. 
407 407  
408 408  
409 409  For example.
410 410  
411 411  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
412 -|**Part Number**|**Probe Used**|**4~~20mA scale**|**Example: 12mA meaning**
413 -|PS-LB-I3|immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
414 -|PS-LB-I5|immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
415 -|PS-LB-T20-B|T20 threaded probe|0~~1MPa|0.5MPa air / gas or water pressure
417 +|(% style="width:111px" %)**Part Number**|(% style="width:158px" %)**Probe Used**|**0~~20mA scale**|**Example: 10mA meaning**
418 +|(% style="width:111px" %)PS-LB-I3|(% style="width:158px" %)immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
419 +|(% style="width:111px" %)PS-LB-I5|(% style="width:158px" %)immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
416 416  
417 -The probe model field provides the convenient for server to identical how it should parse the 4~~20mA sensor value and get the correct value.
421 +The probe model field provides the convenient for server to identical how it should parse the 0~~20mA sensor value and get the correct value.
418 418  
419 419  
420 420  === 2.3.5 0~~20mA value (IDC_IN) ===
421 421  
422 422  
423 -The output value from **Pressure Probe**, use together with Probe Model to get the pressure value or water level.
427 +The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
424 424  
425 425  (% style="color:#037691" %)**Example**:
426 426  
... ... @@ -427,11 +427,6 @@
427 427  27AE(H) = 10158 (D)/1000 = 10.158mA.
428 428  
429 429  
430 -Instead of pressure probe, User can also connect a general 4~~20mA in this port to support different types of 4~~20mA sensors. below is the connection example:
431 -
432 -[[image:image-20230225154759-1.png||height="408" width="741"]]
433 -
434 -
435 435  === 2.3.6 0~~30V value ( pin VDC_IN) ===
436 436  
437 437  
... ... @@ -465,27 +465,9 @@
465 465  0x01: Interrupt Uplink Packet.
466 466  
467 467  
468 -=== (% id="cke_bm_109176S" style="display:none" %) (%%)2.3.8 Sensor value, FPORT~=7 ===
467 +=== 2.3.8 ​Decode payload in The Things Network ===
469 469  
470 470  
471 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:508.222px" %)
472 -|(% style="width:94px" %)(((
473 -**Size(bytes)**
474 -)))|(% style="width:43px" %)2|(% style="width:367px" %)n
475 -|(% style="width:94px" %)**Value**|(% style="width:43px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:367px" %)(((
476 -Voltage value, each 2 bytes is a set of voltage values.
477 -)))
478 -
479 -[[image:image-20230220171300-1.png||height="207" width="863"]]
480 -
481 -Multiple sets of data collected are displayed in this form：
482 -
483 -[voltage value1], [voltage value2], [voltage value3],…[voltage value n/2]
484 -
485 -
486 -=== 2.3.9 ​Decode payload in The Things Network ===
487 -
488 -
489 489  While using TTN network, you can add the payload format to decode the payload.
490 490  
491 491  
... ... @@ -541,6 +541,7 @@
541 541  [[image:1675145060812-420.png]]
542 542  
543 543  
525 +
544 544  After added, the sensor data arrive TTN, it will also arrive and show in Datacake.
545 545  
546 546  
... ... @@ -563,35 +563,35 @@
563 563  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
564 564  
565 565  
566 -= 3. Configure PS-LB =
567 567  
568 -== 3.1 Configure Methods ==
549 += 3. Configure PS-LB via AT Command or LoRaWAN Downlink =
569 569  
570 -PS-LB-NA supports below configure method:
571 571  
572 -* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
573 -* AT Command via UART Connection : See [[FAQ>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/#H7.FAQ]].
574 -* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
552 +Use can configure PS-LB via AT Command or LoRaWAN Downlink.
575 575  
576 -== 3.2 General Commands ==
554 +* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
555 +* LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
577 577  
557 +There are two kinds of commands to configure PS-LB, they are:
558 +
559 +* (% style="color:#037691" %)**General Commands**.
560 +
578 578  These commands are to configure:
579 579  
580 580  * General system settings like: uplink interval.
581 581  * LoRaWAN protocol & radio related command.
582 582  
583 -They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
566 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
584 584  
585 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
568 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
586 586  
587 587  
571 +* (% style="color:#037691" %)**Commands special design for PS-LB**
588 588  
589 -== 3.3 Commands special design for PS-LB ==
590 -
591 591  These commands only valid for PS-LB, as below:
592 592  
593 593  
594 -=== 3.3.1 Set Transmit Interval Time ===
576 +== 3.1 Set Transmit Interval Time ==
595 595  
596 596  
597 597  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -614,12 +614,12 @@
614 614  
615 615  Format: Command Code (0x01) followed by 3 bytes time value.
616 616  
617 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
599 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
618 618  
619 -* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
620 -* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
601 +* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
602 +* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
621 621  
622 -=== 3.3.2 Set Interrupt Mode ===
604 +== 3.2 Set Interrupt Mode ==
623 623  
624 624  
625 625  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -627,19 +627,19 @@
627 627  (% style="color:blue" %)**AT Command: AT+INTMOD**
628 628  
629 629  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
630 -|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 157px;" %)**Response**
631 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
612 +|=**Command Example**|=**Function**|=**Response**
613 +|AT+INTMOD=?|Show current interrupt mode|(((
632 632  0
633 633  OK
634 -the mode is 0 =Disable Interrupt
616 +the mode is 0 = No interruption
635 635  )))
636 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
618 +|AT+INTMOD=2|(((
637 637  Set Transmit Interval
638 -0. (Disable Interrupt),
639 -~1. (Trigger by rising and falling edge)
640 -2. (Trigger by falling edge)
641 -3. (Trigger by rising edge)
642 -)))|(% style="width:157px" %)OK
620 +~1. (Disable Interrupt),
621 +2. (Trigger by rising and falling edge),
622 +3. (Trigger by falling edge)
623 +4. (Trigger by rising edge)
624 +)))|OK
643 643  
644 644  (% style="color:blue" %)**Downlink Command: 0x06**
645 645  
... ... @@ -647,10 +647,10 @@
647 647  
648 648  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
649 649  
650 -* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
651 -* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
632 +* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
633 +* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
652 652  
653 -=== 3.3.3 Set the output time ===
635 +== 3.3 Set the output time ==
654 654  
655 655  
656 656  Feature, Control the output 3V3 , 5V or 12V.
... ... @@ -657,52 +657,52 @@
657 657  
658 658  (% style="color:blue" %)**AT Command: AT+3V3T**
659 659  
660 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:474px" %)
661 -|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 201px;" %)**Function**|=(% style="width: 116px;" %)**Response**
662 -|(% style="width:154px" %)AT+3V3T=?|(% style="width:201px" %)Show 3V3 open time.|(% style="width:116px" %)(((
642 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
643 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 236px;" %)**Function**|=(% style="width: 117px;" %)**Response**
644 +|(% style="width:156px" %)AT+3V3T=?|(% style="width:236px" %)Show 3V3 open time.|(% style="width:117px" %)(((
663 663  0
664 664  OK
665 665  )))
666 -|(% style="width:154px" %)AT+3V3T=0|(% style="width:201px" %)Normally open 3V3 power supply.|(% style="width:116px" %)(((
648 +|(% style="width:156px" %)AT+3V3T=0|(% style="width:236px" %)Normally open 3V3 power supply.|(% style="width:117px" %)(((
667 667  OK
668 668  default setting
669 669  )))
670 -|(% style="width:154px" %)AT+3V3T=1000|(% style="width:201px" %)Close after a delay of 1000 milliseconds.|(% style="width:116px" %)(((
652 +|(% style="width:156px" %)AT+3V3T=1000|(% style="width:236px" %)Close after a delay of 1000 milliseconds.|(% style="width:117px" %)(((
671 671  OK
672 672  )))
673 -|(% style="width:154px" %)AT+3V3T=65535|(% style="width:201px" %)Normally closed 3V3 power supply.|(% style="width:116px" %)(((
655 +|(% style="width:156px" %)AT+3V3T=65535|(% style="width:236px" %)Normally closed 3V3 power supply.|(% style="width:117px" %)(((
674 674  OK
675 675  )))
676 676  
677 677  (% style="color:blue" %)**AT Command: AT+5VT**
678 678  
679 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:470px" %)
680 -|=(% style="width: 155px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 114px;" %)**Response**
681 -|(% style="width:155px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:114px" %)(((
661 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
662 +|=(% style="width: 158px;" %)**Command Example**|=(% style="width: 232px;" %)**Function**|=(% style="width: 119px;" %)**Response**
663 +|(% style="width:158px" %)AT+5VT=?|(% style="width:232px" %)Show 5V open time.|(% style="width:119px" %)(((
682 682  0
683 683  OK
684 684  )))
685 -|(% style="width:155px" %)AT+5VT=0|(% style="width:196px" %)Normally closed 5V power supply.|(% style="width:114px" %)(((
667 +|(% style="width:158px" %)AT+5VT=0|(% style="width:232px" %)Normally closed 5V power supply.|(% style="width:119px" %)(((
686 686  OK
687 687  default setting
688 688  )))
689 -|(% style="width:155px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:114px" %)(((
671 +|(% style="width:158px" %)AT+5VT=1000|(% style="width:232px" %)Close after a delay of 1000 milliseconds.|(% style="width:119px" %)(((
690 690  OK
691 691  )))
692 -|(% style="width:155px" %)AT+5VT=65535|(% style="width:196px" %)Normally open 5V power supply.|(% style="width:114px" %)(((
674 +|(% style="width:158px" %)AT+5VT=65535|(% style="width:232px" %)Normally open 5V power supply.|(% style="width:119px" %)(((
693 693  OK
694 694  )))
695 695  
696 696  (% style="color:blue" %)**AT Command: AT+12VT**
697 697  
698 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:443px" %)
699 -|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 199px;" %)**Function**|=(% style="width: 83px;" %)**Response**
700 -|(% style="width:156px" %)AT+12VT=?|(% style="width:199px" %)Show 12V open time.|(% style="width:83px" %)(((
680 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
681 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 268px;" %)**Function**|=**Response**
682 +|(% style="width:156px" %)AT+12VT=?|(% style="width:268px" %)Show 12V open time.|(((
701 701  0
702 702  OK
703 703  )))
704 -|(% style="width:156px" %)AT+12VT=0|(% style="width:199px" %)Normally closed 12V power supply.|(% style="width:83px" %)OK
705 -|(% style="width:156px" %)AT+12VT=500|(% style="width:199px" %)Close after a delay of 500 milliseconds.|(% style="width:83px" %)(((
686 +|(% style="width:156px" %)AT+12VT=0|(% style="width:268px" %)Normally closed 12V power supply.|OK
687 +|(% style="width:156px" %)AT+12VT=500|(% style="width:268px" %)Close after a delay of 500 milliseconds.|(((
706 706  OK
707 707  )))
708 708  
... ... @@ -712,118 +712,146 @@
712 712  
713 713  The first byte is which power, the second and third bytes are the time to turn on.
714 714  
715 -* Example 1: Downlink Payload: 070101F4  **~-~-->**  AT+3V3T=500
716 -* Example 2: Downlink Payload: 0701FFFF   **~-~-->**  AT+3V3T=65535
717 -* Example 3: Downlink Payload: 070203E8  **~-~-->**  AT+5VT=1000
718 -* Example 4: Downlink Payload: 07020000  **~-~-->**  AT+5VT=0
719 -* Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
720 -* Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
697 +* Example 1: Downlink Payload: 070101F4  -> AT+3V3T=500
698 +* Example 2: Downlink Payload: 0701FFFF   -> AT+3V3T=65535
699 +* Example 3: Downlink Payload: 070203E8  -> AT+5VT=1000
700 +* Example 4: Downlink Payload: 07020000  -> AT+5VT=0
701 +* Example 5: Downlink Payload: 070301F4  -> AT+12VT=500
702 +* Example 6: Downlink Payload: 07030000  -> AT+12VT=0
721 721  
722 -=== 3.3.4 Set the Probe Model ===
704 +== 3.4 Set the Probe Model ==
723 723  
724 724  
725 -Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
707 +(% style="color:blue" %)**AT Command: AT** **+PROBE**
726 726  
727 -**AT Command: AT** **+PROBE**
709 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
710 +|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 267px;" %)**Function**|=**Response**
711 +|(% style="width:157px" %)AT +PROBE =?|(% style="width:267px" %)Get or Set the probe model.|(((
712 +0
713 +OK
714 +)))
715 +|(% style="width:157px" %)AT +PROBE =0003|(% style="width:267px" %)Set water depth sensor mode, 3m type.|OK
716 +|(% style="width:157px" %)AT +PROBE =0101|(% style="width:267px" %)Set pressure transmitters mode, first type.|(((
717 +OK
718 +)))
719 +|(% style="width:157px" %)AT +PROBE =0000|(% style="width:267px" %)Initial state, no settings.|(((
720 +OK
721 +)))
728 728  
729 -AT+PROBE=aabb
723 +(% style="color:blue" %)**Downlink Command: 0x08**
730 730  
731 -When aa=00, it is the water depth mode, and the current is converted into the water depth value; bb is the probe at a depth of several meters.
725 +Format: Command Code (0x08) followed by 2 bytes.
732 732  
733 -When aa=01, it is the pressure mode, which converts the current into a pressure value;
727 +* Example 1: Downlink Payload: 080003  -> AT+PROBE=0003
728 +* Example 2: Downlink Payload: 080101  -> AT+PROBE=0101
734 734  
735 -bb represents which type of pressure sensor it is.
730 += 4. Battery & how to replace =
736 736  
737 -(A->01,B->02,C->03,D->04,E->05,F->06,G->07,H->08,I->09,J->0A,K->0B,L->0C)
732 +== 4.1 Battery Type ==
738 738  
739 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
740 -|**Command Example**|**Function**|**Response**
741 -|AT +PROBE =?|Get or Set the probe model.|0
742 -OK
743 -|AT +PROBE =0003|Set water depth sensor mode, 3m type.|OK
744 -|(((
745 -AT +PROBE =000A
746 746  
747 -
748 -)))|Set water depth sensor mode, 10m type.|OK
749 -|AT +PROBE =0101|Set pressure transmitters mode, first type(A).|OK
750 -|AT +PROBE =0000|Initial state, no settings.|OK
735 +PS-LB is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>https://www.dropbox.com/sh/w9l2oa3ytpculph/AAAPtt-apH4lYfCj-2Y6lHvQa?dl=0]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
751 751  
752 -**Downlink Command: 0x08**
753 753  
754 -Format: Command Code (0x08) followed by 2 bytes.
738 +The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
755 755  
756 -* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
757 -* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
740 +[[image:1675146710956-626.png]]
758 758  
759 -=== 3.3.5 Multiple collections are one uplink（Since firmware V1.1） ===
760 760  
743 +Minimum Working Voltage for the PS-LB:
761 761  
762 -Added AT+STDC command to collect the voltage of VDC_INPUT multiple times and upload it at one time.
745 +PS-LB:  2.45v ~~ 3.6v
763 763  
764 -(% style="color:blue" %)**AT Command: AT** **+STDC**
765 765  
766 -AT+STDC=aa,bb,bb
748 +== 4.2 Replace Battery ==
767 767  
768 -(% style="color:#037691" %)**aa:**(%%)
769 -**0:** means disable this function and use TDC to send packets.
770 -**1:** means enable this function, use the method of multiple acquisitions to send packets.
771 -(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
772 -(% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
773 773  
774 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
775 -|**Command Example**|**Function**|**Response**
776 -|AT+STDC=?|Get the mode of multiple acquisitions and one uplink.|1,10,18
777 -OK
778 -|AT+STDC=1,10,18|Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(((
779 -Attention:Take effect after ATZ
751 +Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
780 780  
781 -OK
782 -)))
783 -|AT+STDC=0, 0,0|(((
784 -Use the TDC interval to send packets.(default)
753 +And make sure the positive and negative pins match.
785 785  
786 -
787 -)))|(((
788 -Attention:Take effect after ATZ
789 789  
790 -OK
791 -)))
756 +== 4.3 Power Consumption Analyze ==
792 792  
793 -(% style="color:blue" %)**Downlink Command: 0xAE**
794 794  
795 -Format: Command Code (0x08) followed by 5 bytes.
759 +Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
796 796  
797 -* Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
798 798  
799 -= 4. Battery & Power Consumption =
762 +Instruction to use as below:
800 800  
801 -PS-LB-NA uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
802 802  
803 - [[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
765 +(% style="color:blue" %)**Step 1:**(%%) Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
804 804  
767 +[[https:~~/~~/www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0>>https://www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0]]
805 805  
806 -= 5. OTA firmware update =
807 807  
770 +(% style="color:blue" %)**Step 2:**(%%) Open it and choose
808 808  
772 +* Product Model
773 +* Uplink Interval
774 +* Working Mode
775 +
776 +And the Life expectation in difference case will be shown on the right.
777 +
778 +[[image:1675146895108-304.png]]
779 +
780 +
781 +The battery related documents as below:
782 +
783 +* [[Battery Dimension>>https://www.dropbox.com/s/ox5g9njwjle7aw3/LSN50-Battery-Dimension.pdf?dl=0]],
784 +* [[Lithium-Thionyl Chloride Battery datasheet, Tech Spec>>https://www.dropbox.com/sh/d4oyfnp8o94180o/AABQewCNSh5GPeQH86UxRgQQa?dl=0]]
785 +* [[Lithium-ion Battery-Capacitor datasheet>>https://www.dropbox.com/s/791gjes2lcbfi1p/SPC_1520_datasheet.jpg?dl=0]], [[Tech Spec>>https://www.dropbox.com/s/4pkepr9qqqvtzf2/SPC1520%20Technical%20Specification20171123.pdf?dl=0]]
786 +
787 +[[image:image-20230131145708-3.png]]
788 +
789 +
790 +=== 4.3.1 ​Battery Note ===
791 +
792 +
793 +The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
794 +
795 +
796 +=== 4.3.2 Replace the battery ===
797 +
798 +
799 +You can change the battery in the PS-LB.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
800 +
801 +The default battery pack of PS-LB includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
802 +
803 +
804 += 5. Remote Configure device =
805 +
806 +== 5.1 Connect via BLE ==
807 +
808 +
809 +Please see this instruction for how to configure via BLE: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]]
810 +
811 +
812 +== 5.2 AT Command Set ==
813 +
814 +
815 +
816 += 6. OTA firmware update =
817 +
818 +
809 809  Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
810 810  
811 811  
812 -= 6. FAQ =
822 += 7. FAQ =
813 813  
814 -== 6.1 How to use AT Command via UART to access device? ==
824 +== 7.1 How to use AT Command to access device? ==
815 815  
816 816  
817 817  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
818 818  
819 819  
820 -== 6.2 How to update firmware via UART port? ==
830 +== 7.2 How to update firmware via UART port? ==
821 821  
822 822  
823 823  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
824 824  
825 825  
826 -== 6.3 How to change the LoRa Frequency Bands/Region? ==
836 +== 7.3 How to change the LoRa Frequency Bands/Region? ==
827 827  
828 828  
829 829  You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
... ... @@ -830,13 +830,13 @@
830 830  When downloading the images, choose the required image file for download. ​
831 831  
832 832  
833 -= 7. Order Info =
843 += 8. Order Info =
834 834  
835 835  
836 836  [[image:image-20230131153105-4.png]]
837 837  
838 838  
839 -= 8. ​Packing Info =
849 += 9. ​Packing Info =
840 840  
841 841  
842 842  (% style="color:#037691" %)**Package Includes**:
... ... @@ -850,7 +850,7 @@
850 850  * Package Size / pcs : cm
851 851  * Weight / pcs : g
852 852  
853 -= 9. Support =
863 += 10. Support =
854 854  
855 855  
856 856  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20230201090514-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -560.9 KB
Content
image-20230220171300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -98.0 KB
Content
image-20230222174559-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
image-20230225154759-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -468.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0