Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -300,7 +300,7 @@
300	300
301	301	Press the button for 5 seconds to activate the PS-LB.
302	302
303		-**Green led** will fast blink 5 times, device will enter **OTA mode** for 3 seconds. And then start to JOIN LoRaWAN network. **Green led** will solidly turn on for 5 seconds after joined in network.
	303	+**(% style="color:green" %)Green led**(%%) will fast blink 5 times, device will enter **(% style="color:blue" %)OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. **(% style="color:green" %)Green led**(%%) will solidly turn on for 5 seconds after joined in network.
304	304
305	305	After join success, it will start to upload messages to TTN and you can see the messages in the panel.
306	306
...	...	@@ -335,11 +335,11 @@
335	335	[[image:1675144504430-490.png]]
336	336
337	337
338		-**Sensor Model**: For PS-LB, this value is 0x16
	338	+**(% style="color:#037691" %)Sensor Model**(%%): For PS-LB, this value is 0x16
339	339
340		-**Firmware Version**: 0x0100, Means: v1.0.0 version
	340	+**(% style="color:#037691" %)Firmware Version**(%%): 0x0100, Means: v1.0.0 version
341	341
342		-**Frequency Band**:
	342	+**(% style="color:#037691" %)Frequency Band**:
343	343
344	344	*0x01: EU868
345	345
...	...	@@ -370,7 +370,7 @@
370	370	*0x0e: MA869
371	371
372	372
373		-**Sub-Band**:
	373	+**(% style="color:#037691" %)Sub-Band**:
374	374
375	375	AU915 and US915:value 0x00 ~~ 0x08
376	376
...	...	@@ -379,7 +379,7 @@
379	379	Other Bands: Always 0x00
380	380
381	381
382		-**Battery Info**:
	382	+**(% style="color:#037691" %)Battery Info**:
383	383
384	384	Check the battery voltage.
385	385
...	...	@@ -388,7 +388,7 @@
388	388	Ex2: 0x0B49 = 2889mV
389	389
390	390
391		-=== 1.3.2 Sensor value, FPORT~=2 ===
	391	+=== 2.3.2 Sensor value, FPORT~=2 ===
392	392
393	393
394	394	Uplink payload includes in total 9 bytes.
...	...	@@ -435,7 +435,7 @@
435	435
436	436	The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
437	437
438		-**Example**:
	438	+**(% style="color:#037691" %)Example**:
439	439
440	440	27AE(H) = 10158 (D)/1000 = 10.158mA.
441	441
...	...	@@ -445,7 +445,7 @@
445	445
446	446	Measure the voltage value. The range is 0 to 30V.
447	447
448		-**Example**:
	448	+**(% style="color:#037691" %)Example**:
449	449
450	450	138E(H) = 5006(D)/1000= 5.006V
451	451
...	...	@@ -455,7 +455,7 @@
455	455
456	456	IN1 and IN2 are used as digital input pins.
457	457
458		-**Example**:
	458	+**(% style="color:#037691" %)Example**:
459	459
460	460	09 (H) :(0x09&0x08)>>3=1    IN1 pin is high level.
461	461
...	...	@@ -464,7 +464,7 @@
464	464
465	465	This data field shows if this packet is generated by **Interrupt Pin** or not. [[Click here>>path:#Int_mod]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
466	466
467		-**Example:**
	467	+**(% style="color:#037691" %)Example:**
468	468
469	469	09 (H) : (0x09&0x02)>>1=1    The level of the interrupt pin.
470	470
...	...	@@ -497,9 +497,9 @@
497	497	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
498	498
499	499
500		-**Step 1: **Be sure that your device is programmed and properly connected to the network at this time.
	500	+**(% style="color:blue" %)Step 1: **(%%)Be sure that your device is programmed and properly connected to the network at this time.
501	501
502		-**Step 2:** To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
	502	+**(% style="color:blue" %)Step 2:**(%%) To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
503	503
504	504
505	505	[[image:1675144951092-237.png]]
...	...	@@ -508,9 +508,9 @@
508	508	[[image:1675144960452-126.png]]
509	509
510	510
511		-**Step 3:** Create an account or log in Datacake.
	511	+**(% style="color:blue" %)Step 3:**(%%) Create an account or log in Datacake.
512	512
513		-**Step 4:** Create PS-LB product.
	513	+**(% style="color:#blue" %)Step 4:** (%%)Create PS-LB product.
514	514
515	515	[[image:1675145004465-869.png]]
516	516
...	...	@@ -523,7 +523,7 @@
523	523	[[image:1675145029119-717.png]]
524	524
525	525
526		-**Step 5: **add payload decode
	526	+**(% style="color:blue" %)Step 5: **(%%)add payload decode
527	527
528	528	[[image:1675145051360-659.png]]
529	529