Last modified by Xiaoling on 2025/04/19 17:58
<
From version < 42.29 >
edited by Xiaoling
on 2023/01/31 16:49
To version < 53.1 >
edited by Edwin Chen
on 2023/04/01 21:15
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -16,22 +16,33 @@
16 16  == 1.1 What is LoRaWAN Pressure Sensor ==
17 17  
18 18  
19 +(((
19 19  The Dragino PS-LB series sensors are (% style="color:blue" %)**LoRaWAN Pressure Sensor**(%%) for Internet of Things solution. PS-LB can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
21 +)))
20 20  
23 +(((
21 21  The PS-LB series sensors include (% style="color:blue" %)**Thread Installation Type**(%%) and (% style="color:blue" %)**Immersion Type**(%%), it supports different pressure range which can be used for different measurement requirement.
25 +)))
22 22  
27 +(((
23 23  The LoRa wireless technology used in PS-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
29 +)))
24 24  
31 +(((
25 25  PS-LB supports BLE configure and wireless OTA update which make user easy to use.
33 +)))
26 26  
35 +(((
27 27  PS-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
37 +)))
28 28  
39 +(((
29 29  Each PS-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
41 +)))
30 30  
31 31  [[image:1675071321348-194.png]]
32 32  
33 33  
34 -
35 35  == 1.2 ​Features ==
36 36  
37 37  
... ... @@ -47,7 +47,9 @@
47 47  * Uplink on periodically
48 48  * Downlink to change configure
49 49  * 8500mAh Battery for long term use
61 +* Controllable 3.3v,5v and 12v output to power external sensor
50 50  
63 +
51 51  == 1.3 Specification ==
52 52  
53 53  
... ... @@ -94,6 +94,7 @@
94 94  * Sleep Mode: 5uA @ 3.3v
95 95  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
96 96  
110 +
97 97  == 1.4 Probe Types ==
98 98  
99 99  === 1.4.1 Thread Installation Type ===
... ... @@ -112,6 +112,7 @@
112 112  * Operating temperature: -20℃~~60℃
113 113  * Connector Type: Various Types, see order info
114 114  
129 +
115 115  === 1.4.2 Immersion Type ===
116 116  
117 117  
... ... @@ -121,18 +121,15 @@
121 121  * Measuring Range: Measure range can be customized, up to 100m.
122 122  * Accuracy: 0.2% F.S
123 123  * Long-Term Stability: ±0.2% F.S / Year
124 -* Overload 200% F.S
125 -* Zero Temperature Drift: ±2% F.S)
126 -* FS Temperature Drift: ±2% F.S
127 127  * Storage temperature: -30℃~~80℃
128 -* Operating temperature: -40℃~~85℃
140 +* Operating temperature: 0℃~~50℃
129 129  * Material: 316 stainless steels
130 130  
143 +
131 131  == 1.5 Probe Dimension ==
132 132  
133 133  
134 134  
135 -
136 136  == 1.6 Application and Installation ==
137 137  
138 138  === 1.6.1 Thread Installation Type ===
... ... @@ -187,18 +187,19 @@
187 187  
188 188  
189 189  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
190 -|=(% style="width: 150px;" %)**Behavior on ACT**|=(% style="width: 90px;" %)**Function**|=**Action**
191 -|(% style="width:260px" %)Pressing ACT between 1s < time < 3s|(% style="width:100px" %)Send an uplink|(((
202 +|=(% style="width: 167px;" %)**Behavior on ACT**|=(% style="width: 117px;" %)**Function**|=(% style="width: 225px;" %)**Action**
203 +|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
192 192  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
193 193  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
194 194  )))
195 -|(% style="width:138px" %)Pressing ACT for more than 3s|(% style="width:100px" %)Active Device|(((
207 +|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
196 196  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
197 197  (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
198 198  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
199 199  )))
200 -|(% style="width:138px" %)Fast press ACT 5 times.|(% style="width:100px" %)Deactivate Device|red led will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
212 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
201 201  
214 +
202 202  == 1.9 Pin Mapping ==
203 203  
204 204  
... ... @@ -223,8 +223,6 @@
223 223  == 1.11 Mechanical ==
224 224  
225 225  
226 -
227 -
228 228  [[image:1675143884058-338.png]]
229 229  
230 230  
... ... @@ -242,7 +242,6 @@
242 242  The PS-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
243 243  
244 244  
245 -
246 246  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
247 247  
248 248  
... ... @@ -296,18 +296,8 @@
296 296  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
297 297  
298 298  
299 -
300 300  == 2.3 ​Uplink Payload ==
301 301  
302 -
303 -Uplink payloads have two types:
304 -
305 -* Distance Value: Use FPORT=2
306 -* Other control commands: Use other FPORT fields.
307 -
308 -The application server should parse the correct value based on FPORT settings.
309 -
310 -
311 311  === 2.3.1 Device Status, FPORT~=5 ===
312 312  
313 313  
... ... @@ -318,8 +318,8 @@
318 318  
319 319  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
320 320  |(% colspan="6" %)**Device Status (FPORT=5)**
321 -|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|**1**|**1**|**2**
322 -|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|Frequency Band|Sub-band|BAT
321 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
322 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
323 323  
324 324  Example parse in TTNv3
325 325  
... ... @@ -389,12 +389,11 @@
389 389  |(% style="width:97px" %)(((
390 390  **Size(bytes)**
391 391  )))|(% style="width:48px" %)**2**|(% style="width:71px" %)**2**|(% style="width:98px" %)**2**|(% style="width:73px" %)**2**|(% style="width:122px" %)**1**
392 -|(% style="width:97px" %)**Value**|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
392 +|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.5ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.607E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.707E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.8IN126IN226INTpin"]]
393 393  
394 394  [[image:1675144608950-310.png]]
395 395  
396 396  
397 -
398 398  === 2.3.3 Battery Info ===
399 399  
400 400  
... ... @@ -408,23 +408,24 @@
408 408  === 2.3.4 Probe Model ===
409 409  
410 410  
411 -PS-LB has different kind of probe, 0~~20mA represent the full scale of the measuring range. So a 15mA output means different meaning for different probe. 
410 +PS-LB has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe. 
412 412  
413 413  
414 414  For example.
415 415  
416 416  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
417 -|(% style="width:111px" %)**Part Number**|(% style="width:158px" %)**Probe Used**|**0~~20mA scale**|**Example: 10mA meaning**
418 -|(% style="width:111px" %)PS-LB-I3|(% style="width:158px" %)immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
419 -|(% style="width:111px" %)PS-LB-I5|(% style="width:158px" %)immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
416 +|**Part Number**|**Probe Used**|**4~~20mA scale**|**Example: 12mA meaning**
417 +|PS-LB-I3|immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
418 +|PS-LB-I5|immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
419 +|PS-LB-T20-B|T20 threaded probe|0~~1MPa|0.5MPa air / gas or water pressure
420 420  
421 -The probe model field provides the convenient for server to identical how it should parse the 0~~20mA sensor value and get the correct value.
421 +The probe model field provides the convenient for server to identical how it should parse the 4~~20mA sensor value and get the correct value.
422 422  
423 423  
424 424  === 2.3.5 0~~20mA value (IDC_IN) ===
425 425  
426 426  
427 -The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
427 +The output value from **Pressure Probe**, use together with Probe Model to get the pressure value or water level.
428 428  
429 429  (% style="color:#037691" %)**Example**:
430 430  
... ... @@ -431,6 +431,11 @@
431 431  27AE(H) = 10158 (D)/1000 = 10.158mA.
432 432  
433 433  
434 +Instead of pressure probe, User can also connect a general 4~~20mA in this port to support different types of 4~~20mA sensors. below is the connection example:
435 +
436 +[[image:image-20230225154759-1.png||height="408" width="741"]]
437 +
438 +
434 434  === 2.3.6 0~~30V value ( pin VDC_IN) ===
435 435  
436 436  
... ... @@ -464,9 +464,27 @@
464 464  0x01: Interrupt Uplink Packet.
465 465  
466 466  
467 -=== 2.3.8 ​Decode payload in The Things Network ===
472 +=== (% id="cke_bm_109176S" style="display:none" %) (%%)2.3.8 Sensor value, FPORT~=7 ===
468 468  
469 469  
475 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:508.222px" %)
476 +|(% style="width:94px" %)(((
477 +**Size(bytes)**
478 +)))|(% style="width:43px" %)2|(% style="width:367px" %)n
479 +|(% style="width:94px" %)**Value**|(% style="width:43px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:367px" %)(((
480 +Voltage value, each 2 bytes is a set of voltage values.
481 +)))
482 +
483 +[[image:image-20230220171300-1.png||height="207" width="863"]]
484 +
485 +Multiple sets of data collected are displayed in this form：
486 +
487 +[voltage value1], [voltage value2], [voltage value3],…[voltage value n/2]
488 +
489 +
490 +=== 2.3.9 ​Decode payload in The Things Network ===
491 +
492 +
470 470  While using TTN network, you can add the payload format to decode the payload.
471 471  
472 472  
... ... @@ -522,7 +522,6 @@
522 522  [[image:1675145060812-420.png]]
523 523  
524 524  
525 -
526 526  After added, the sensor data arrive TTN, it will also arrive and show in Datacake.
527 527  
528 528  
... ... @@ -545,35 +545,36 @@
545 545  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
546 546  
547 547  
570 += 3. Configure PS-LB =
548 548  
549 -= 3. Configure PS-LB via AT Command or LoRaWAN Downlink =
572 +== 3.1 Configure Methods ==
550 550  
574 +PS-LB-NA supports below configure method:
551 551  
552 -Use can configure PS-LB via AT Command or LoRaWAN Downlink.
576 +* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
577 +* AT Command via UART Connection : See [[FAQ>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/#H7.FAQ]].
578 +* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
553 553  
554 -* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
555 -* LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
556 556  
557 -There are two kinds of commands to configure PS-LB, they are:
581 +== 3.2 General Commands ==
558 558  
559 -* (% style="color:#037691" %)**General Commands**.
560 -
561 561  These commands are to configure:
562 562  
563 563  * General system settings like: uplink interval.
564 564  * LoRaWAN protocol & radio related command.
565 565  
566 -They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
588 +They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
567 567  
568 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
590 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
569 569  
570 570  
571 -* (% style="color:#037691" %)**Commands special design for PS-LB**
572 572  
594 +== 3.3 Commands special design for PS-LB ==
595 +
573 573  These commands only valid for PS-LB, as below:
574 574  
575 575  
576 -== 3.1 Set Transmit Interval Time ==
599 +=== 3.3.1 Set Transmit Interval Time ===
577 577  
578 578  
579 579  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -596,32 +596,33 @@
596 596  
597 597  Format: Command Code (0x01) followed by 3 bytes time value.
598 598  
599 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
622 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
600 600  
601 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
602 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
624 +* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
625 +* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
603 603  
604 -== 3.2 Set Interrupt Mode ==
605 605  
628 +=== 3.3.2 Set Interrupt Mode ===
606 606  
630 +
607 607  Feature, Set Interrupt mode for GPIO_EXIT.
608 608  
609 609  (% style="color:blue" %)**AT Command: AT+INTMOD**
610 610  
611 611  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
612 -|=**Command Example**|=**Function**|=**Response**
613 -|AT+INTMOD=?|Show current interrupt mode|(((
636 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 157px;" %)**Response**
637 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
614 614  0
615 615  OK
616 -the mode is 0 = No interruption
640 +the mode is 0 =Disable Interrupt
617 617  )))
618 -|AT+INTMOD=2|(((
642 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
619 619  Set Transmit Interval
620 -~1. (Disable Interrupt),
621 -2. (Trigger by rising and falling edge)
622 -3. (Trigger by falling edge)
623 -4. (Trigger by rising edge)
624 -)))|OK
644 +0. (Disable Interrupt),
645 +~1. (Trigger by rising and falling edge)
646 +2. (Trigger by falling edge)
647 +3. (Trigger by rising edge)
648 +)))|(% style="width:157px" %)OK
625 625  
626 626  (% style="color:blue" %)**Downlink Command: 0x06**
627 627  
... ... @@ -629,49 +629,50 @@
629 629  
630 630  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
631 631  
632 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
633 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
656 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
657 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
634 634  
635 -== 3.3 Set the output time ==
636 636  
660 +=== 3.3.3 Set the output time ===
637 637  
662 +
638 638  Feature, Control the output 3V3 , 5V or 12V.
639 639  
640 640  (% style="color:blue" %)**AT Command: AT+3V3T**
641 641  
642 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
643 -|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 236px;" %)**Function**|=(% style="width: 117px;" %)**Response**
644 -|(% style="width:156px" %)AT+3V3T=?|(% style="width:236px" %)Show 3V3 open time.|(% style="width:117px" %)(((
667 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:474px" %)
668 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 201px;" %)**Function**|=(% style="width: 116px;" %)**Response**
669 +|(% style="width:154px" %)AT+3V3T=?|(% style="width:201px" %)Show 3V3 open time.|(% style="width:116px" %)(((
645 645  0
646 646  OK
647 647  )))
648 -|(% style="width:156px" %)AT+3V3T=0|(% style="width:236px" %)Normally open 3V3 power supply.|(% style="width:117px" %)(((
673 +|(% style="width:154px" %)AT+3V3T=0|(% style="width:201px" %)Normally open 3V3 power supply.|(% style="width:116px" %)(((
649 649  OK
650 650  default setting
651 651  )))
652 -|(% style="width:156px" %)AT+3V3T=1000|(% style="width:236px" %)Close after a delay of 1000 milliseconds.|(% style="width:117px" %)(((
677 +|(% style="width:154px" %)AT+3V3T=1000|(% style="width:201px" %)Close after a delay of 1000 milliseconds.|(% style="width:116px" %)(((
653 653  OK
654 654  )))
655 -|(% style="width:156px" %)AT+3V3T=65535|(% style="width:236px" %)Normally closed 3V3 power supply.|(% style="width:117px" %)(((
680 +|(% style="width:154px" %)AT+3V3T=65535|(% style="width:201px" %)Normally closed 3V3 power supply.|(% style="width:116px" %)(((
656 656  OK
657 657  )))
658 658  
659 659  (% style="color:blue" %)**AT Command: AT+5VT**
660 660  
661 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
662 -|=(% style="width: 158px;" %)**Command Example**|=(% style="width: 232px;" %)**Function**|=(% style="width: 119px;" %)**Response**
663 -|(% style="width:158px" %)AT+5VT=?|(% style="width:232px" %)Show 5V open time.|(% style="width:119px" %)(((
686 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:470px" %)
687 +|=(% style="width: 155px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 114px;" %)**Response**
688 +|(% style="width:155px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:114px" %)(((
664 664  0
665 665  OK
666 666  )))
667 -|(% style="width:158px" %)AT+5VT=0|(% style="width:232px" %)Normally closed 5V power supply.|(% style="width:119px" %)(((
692 +|(% style="width:155px" %)AT+5VT=0|(% style="width:196px" %)Normally closed 5V power supply.|(% style="width:114px" %)(((
668 668  OK
669 669  default setting
670 670  )))
671 -|(% style="width:158px" %)AT+5VT=1000|(% style="width:232px" %)Close after a delay of 1000 milliseconds.|(% style="width:119px" %)(((
696 +|(% style="width:155px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:114px" %)(((
672 672  OK
673 673  )))
674 -|(% style="width:158px" %)AT+5VT=65535|(% style="width:232px" %)Normally open 5V power supply.|(% style="width:119px" %)(((
699 +|(% style="width:155px" %)AT+5VT=65535|(% style="width:196px" %)Normally open 5V power supply.|(% style="width:114px" %)(((
675 675  OK
676 676  )))
677 677  
... ... @@ -694,146 +694,121 @@
694 694  
695 695  The first byte is which power, the second and third bytes are the time to turn on.
696 696  
697 -* Example 1: Downlink Payload: 070101F4  -> AT+3V3T=500
698 -* Example 2: Downlink Payload: 0701FFFF   -> AT+3V3T=65535
699 -* Example 3: Downlink Payload: 070203E8  -> AT+5VT=1000
700 -* Example 4: Downlink Payload: 07020000  -> AT+5VT=0
701 -* Example 5: Downlink Payload: 070301F4  -> AT+12VT=500
702 -* Example 6: Downlink Payload: 07030000  -> AT+12VT=0
722 +* Example 1: Downlink Payload: 070101F4  **~-~-->**  AT+3V3T=500
723 +* Example 2: Downlink Payload: 0701FFFF   **~-~-->**  AT+3V3T=65535
724 +* Example 3: Downlink Payload: 070203E8  **~-~-->**  AT+5VT=1000
725 +* Example 4: Downlink Payload: 07020000  **~-~-->**  AT+5VT=0
726 +* Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
727 +* Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
703 703  
704 -== 3.4 Set the Probe Model ==
705 705  
730 +=== 3.3.4 Set the Probe Model ===
706 706  
707 -(% style="color:blue" %)**AT Command: AT** **+PROBE**
708 708  
709 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
710 -|=(% style="width: 157px;" %)**Command Example**|=(% style="width: 267px;" %)**Function**|=**Response**
711 -|(% style="width:157px" %)AT +PROBE =?|(% style="width:267px" %)Get or Set the probe model.|(((
712 -0
713 -OK
714 -)))
715 -|(% style="width:157px" %)AT +PROBE =0003|(% style="width:267px" %)Set water depth sensor mode, 3m type.|OK
716 -|(% style="width:157px" %)AT +PROBE =0101|(% style="width:267px" %)Set pressure transmitters mode, first type.|(((
717 -OK
718 -)))
719 -|(% style="width:157px" %)AT +PROBE =0000|(% style="width:267px" %)Initial state, no settings.|(((
720 -OK
721 -)))
733 +Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
722 722  
723 -(% style="color:blue" %)**Downlink Command: 0x08**
735 +**AT Command: AT** **+PROBE**
724 724  
725 -Format: Command Code (0x08) followed by 2 bytes.
737 +AT+PROBE=aabb
726 726  
727 -* Example 1: Downlink Payload: 080003  -> AT+PROBE=0003
728 -* Example 2: Downlink Payload: 080101  -> AT+PROBE=0101
739 +When aa=00, it is the water depth mode, and the current is converted into the water depth value; bb is the probe at a depth of several meters.
729 729  
730 -= 4. Battery & how to replace =
741 +When aa=01, it is the pressure mode, which converts the current into a pressure value;
731 731  
732 -== 4.1 Battery Type ==
743 +bb represents which type of pressure sensor it is.
733 733  
745 +(A->01,B->02,C->03,D->04,E->05,F->06,G->07,H->08,I->09,J->0A,K->0B,L->0C)
734 734  
735 -PS-LB is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>https://www.dropbox.com/sh/w9l2oa3ytpculph/AAAPtt-apH4lYfCj-2Y6lHvQa?dl=0]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
747 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
748 +|**Command Example**|**Function**|**Response**
749 +|AT +PROBE =?|Get or Set the probe model.|0
750 +OK
751 +|AT +PROBE =0003|Set water depth sensor mode, 3m type.|OK
752 +|(((
753 +AT +PROBE =000A
736 736  
755 +
756 +)))|Set water depth sensor mode, 10m type.|OK
757 +|AT +PROBE =0101|Set pressure transmitters mode, first type(A).|OK
758 +|AT +PROBE =0000|Initial state, no settings.|OK
737 737  
738 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
760 +**Downlink Command: 0x08**
739 739  
740 -[[image:1675146710956-626.png]]
762 +Format: Command Code (0x08) followed by 2 bytes.
741 741  
764 +* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
765 +* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
742 742  
743 -Minimum Working Voltage for the PS-LB:
744 744  
745 -PS-LB:  2.45v ~~ 3.6v
768 +=== 3.3.5 Multiple collections are one uplink（Since firmware V1.1） ===
746 746  
747 747  
748 -== 4.2 Replace Battery ==
771 +Added AT+STDC command to collect the voltage of VDC_INPUT multiple times and upload it at one time.
749 749  
773 +(% style="color:blue" %)**AT Command: AT** **+STDC**
750 750  
751 -Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
775 +AT+STDC=aa,bb,bb
752 752  
753 -And make sure the positive and negative pins match.
777 +(% style="color:#037691" %)**aa:**(%%)
778 +**0:** means disable this function and use TDC to send packets.
779 +**1:** means enable this function, use the method of multiple acquisitions to send packets.
780 +(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
781 +(% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
754 754  
783 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
784 +|**Command Example**|**Function**|**Response**
785 +|AT+STDC=?|Get the mode of multiple acquisitions and one uplink.|1,10,18
786 +OK
787 +|AT+STDC=1,10,18|Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(((
788 +Attention:Take effect after ATZ
755 755  
756 -== 4.3 Power Consumption Analyze ==
790 +OK
791 +)))
792 +|AT+STDC=0, 0,0|(((
793 +Use the TDC interval to send packets.(default)
757 757  
795 +
796 +)))|(((
797 +Attention:Take effect after ATZ
758 758  
759 -Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
799 +OK
800 +)))
760 760  
802 +(% style="color:blue" %)**Downlink Command: 0xAE**
761 761  
762 -Instruction to use as below:
804 +Format: Command Code (0x08) followed by 5 bytes.
763 763  
806 +* Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
764 764  
765 -(% style="color:blue" %)**Step 1:**(%%) Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
766 766  
767 -[[https:~~/~~/www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0>>https://www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0]]
809 += 4. Battery & Power Consumption =
768 768  
811 +PS-LB-NA uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
769 769  
770 -(% style="color:blue" %)**Step 2:**(%%) Open it and choose
813 + [[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
771 771  
772 -* Product Model
773 -* Uplink Interval
774 -* Working Mode
775 775  
776 -And the Life expectation in difference case will be shown on the right.
816 += 5. OTA firmware update =
777 777  
778 -[[image:1675146895108-304.png]]
779 779  
780 -
781 -The battery related documents as below:
782 -
783 -* [[Battery Dimension>>https://www.dropbox.com/s/ox5g9njwjle7aw3/LSN50-Battery-Dimension.pdf?dl=0]],
784 -* [[Lithium-Thionyl Chloride Battery datasheet, Tech Spec>>https://www.dropbox.com/sh/d4oyfnp8o94180o/AABQewCNSh5GPeQH86UxRgQQa?dl=0]]
785 -* [[Lithium-ion Battery-Capacitor datasheet>>https://www.dropbox.com/s/791gjes2lcbfi1p/SPC_1520_datasheet.jpg?dl=0]], [[Tech Spec>>https://www.dropbox.com/s/4pkepr9qqqvtzf2/SPC1520%20Technical%20Specification20171123.pdf?dl=0]]
786 -
787 -[[image:image-20230131145708-3.png]]
788 -
789 -
790 -=== 4.3.1 ​Battery Note ===
791 -
792 -
793 -The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
794 -
795 -
796 -=== 4.3.2 Replace the battery ===
797 -
798 -
799 -You can change the battery in the PS-LB.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
800 -
801 -The default battery pack of PS-LB includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
802 -
803 -
804 -= 5. Remote Configure device =
805 -
806 -== 5.1 Connect via BLE ==
807 -
808 -
809 -Please see this instruction for how to configure via BLE: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]]
810 -
811 -
812 -== 5.2 AT Command Set ==
813 -
814 -
815 -
816 -= 6. OTA firmware update =
817 -
818 -
819 819  Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
820 820  
821 821  
822 -= 7. FAQ =
822 += 6. FAQ =
823 823  
824 -== 7.1 How to use AT Command to access device? ==
824 +== 6.1 How to use AT Command via UART to access device? ==
825 825  
826 826  
827 827  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
828 828  
829 829  
830 -== 7.2 How to update firmware via UART port? ==
830 +== 6.2 How to update firmware via UART port? ==
831 831  
832 832  
833 833  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
834 834  
835 835  
836 -== 7.3 How to change the LoRa Frequency Bands/Region? ==
836 +== 6.3 How to change the LoRa Frequency Bands/Region? ==
837 837  
838 838  
839 839  You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
... ... @@ -840,13 +840,13 @@
840 840  When downloading the images, choose the required image file for download. ​
841 841  
842 842  
843 -= 8. Order Info =
843 += 7. Order Info =
844 844  
845 845  
846 846  [[image:image-20230131153105-4.png]]
847 847  
848 848  
849 -= 9. ​Packing Info =
849 += 8. ​Packing Info =
850 850  
851 851  
852 852  (% style="color:#037691" %)**Package Includes**:
... ... @@ -860,9 +860,10 @@
860 860  * Package Size / pcs : cm
861 861  * Weight / pcs : g
862 862  
863 -= 10. Support =
864 864  
864 += 9. Support =
865 865  
866 +
866 866  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
867 867  
868 868  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230201090514-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +560.9 KB
Content
image-20230220171300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20230222174559-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20230225154759-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +468.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0