Last modified by Xiaoling on 2025/04/19 17:58
<
From version < 42.21 >
edited by Xiaoling
on 2023/01/31 16:19
To version < 53.2 >
edited by Xiaoling
on 2023/04/03 10:59
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,22 +16,33 @@
16 16  == 1.1 What is LoRaWAN Pressure Sensor ==
17 17  
18 18  
19 +(((
19 19  The Dragino PS-LB series sensors are (% style="color:blue" %)**LoRaWAN Pressure Sensor**(%%) for Internet of Things solution. PS-LB can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
21 +)))
20 20  
23 +(((
21 21  The PS-LB series sensors include (% style="color:blue" %)**Thread Installation Type**(%%) and (% style="color:blue" %)**Immersion Type**(%%), it supports different pressure range which can be used for different measurement requirement.
25 +)))
22 22  
27 +(((
23 23  The LoRa wireless technology used in PS-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
29 +)))
24 24  
31 +(((
25 25  PS-LB supports BLE configure and wireless OTA update which make user easy to use.
33 +)))
26 26  
35 +(((
27 27  PS-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
37 +)))
28 28  
39 +(((
29 29  Each PS-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
41 +)))
30 30  
31 31  [[image:1675071321348-194.png]]
32 32  
33 33  
34 -
35 35  == 1.2 ​Features ==
36 36  
37 37  
... ... @@ -47,6 +47,7 @@
47 47  * Uplink on periodically
48 48  * Downlink to change configure
49 49  * 8500mAh Battery for long term use
61 +* Controllable 3.3v,5v and 12v output to power external sensor
50 50  
51 51  == 1.3 Specification ==
52 52  
... ... @@ -121,11 +121,8 @@
121 121  * Measuring Range: Measure range can be customized, up to 100m.
122 122  * Accuracy: 0.2% F.S
123 123  * Long-Term Stability: ±0.2% F.S / Year
124 -* Overload 200% F.S
125 -* Zero Temperature Drift: ±2% F.S)
126 -* FS Temperature Drift: ±2% F.S
127 127  * Storage temperature: -30℃~~80℃
128 -* Operating temperature: -40℃~~85℃
137 +* Operating temperature: 0℃~~50℃
129 129  * Material: 316 stainless steels
130 130  
131 131  == 1.5 Probe Dimension ==
... ... @@ -132,7 +132,6 @@
132 132  
133 133  
134 134  
135 -
136 136  == 1.6 Application and Installation ==
137 137  
138 138  === 1.6.1 Thread Installation Type ===
... ... @@ -186,22 +186,20 @@
186 186  [[image:1675071855856-879.png]]
187 187  
188 188  
189 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
190 -|(% style="width:138px" %)**Behavior on ACT**|(% style="width:100px" %)**Function**|**Action**
191 -|(% style="width:138px" %)Pressing ACT between 1s < time < 3s|(% style="width:100px" %)Send an uplink|(((
197 +(% border="1" cellspacing="4" style="width:510px" %)
198 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
199 +|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
192 192  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
193 -
194 194  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
195 195  )))
196 -|(% style="width:138px" %)Pressing ACT for more than 3s|(% style="width:100px" %)Active Device|(((
197 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
198 -
199 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
200 -
203 +|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
204 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
205 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
201 201  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
202 202  )))
203 -|(% style="width:138px" %)Fast press ACT 5 times.|(% style="width:100px" %)Deactivate Device|red led will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
208 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB-NA is in Deep Sleep Mode.
204 204  
210 +
205 205  == 1.9 Pin Mapping ==
206 206  
207 207  
... ... @@ -226,8 +226,6 @@
226 226  == 1.11 Mechanical ==
227 227  
228 228  
229 -
230 -
231 231  [[image:1675143884058-338.png]]
232 232  
233 233  
... ... @@ -245,7 +245,6 @@
245 245  The PS-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
246 246  
247 247  
248 -
249 249  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
250 250  
251 251  
... ... @@ -299,18 +299,8 @@
299 299  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
300 300  
301 301  
302 -
303 303  == 2.3 ​Uplink Payload ==
304 304  
305 -
306 -Uplink payloads have two types:
307 -
308 -* Distance Value: Use FPORT=2
309 -* Other control commands: Use other FPORT fields.
310 -
311 -The application server should parse the correct value based on FPORT settings.
312 -
313 -
314 314  === 2.3.1 Device Status, FPORT~=5 ===
315 315  
316 316  
... ... @@ -321,8 +321,8 @@
321 321  
322 322  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
323 323  |(% colspan="6" %)**Device Status (FPORT=5)**
324 -|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|**1**|**1**|**2**
325 -|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|Frequency Band|Sub-band|BAT
317 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
318 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
326 326  
327 327  Example parse in TTNv3
328 328  
... ... @@ -391,13 +391,12 @@
391 391  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
392 392  |(% style="width:97px" %)(((
393 393  **Size(bytes)**
394 -)))|(% style="width:48px" %)**2**|(% style="width:58px" %)**2**|**2**|**2**|**1**
395 -|(% style="width:97px" %)**Value**|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:58px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
387 +)))|(% style="width:48px" %)**2**|(% style="width:71px" %)**2**|(% style="width:98px" %)**2**|(% style="width:73px" %)**2**|(% style="width:122px" %)**1**
388 +|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.5ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.607E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.707E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.8IN126IN226INTpin"]]
396 396  
397 397  [[image:1675144608950-310.png]]
398 398  
399 399  
400 -
401 401  === 2.3.3 Battery Info ===
402 402  
403 403  
... ... @@ -411,23 +411,24 @@
411 411  === 2.3.4 Probe Model ===
412 412  
413 413  
414 -PS-LB has different kind of probe, 0~~20mA represent the full scale of the measuring range. So a 15mA output means different meaning for different probe. 
406 +PS-LB has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe. 
415 415  
416 416  
417 417  For example.
418 418  
419 419  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
420 -|(% style="width:111px" %)**Part Number**|(% style="width:158px" %)**Probe Used**|**0~~20mA scale**|**Example: 10mA meaning**
421 -|(% style="width:111px" %)PS-LB-I3|(% style="width:158px" %)immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
422 -|(% style="width:111px" %)PS-LB-I5|(% style="width:158px" %)immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
412 +|**Part Number**|**Probe Used**|**4~~20mA scale**|**Example: 12mA meaning**
413 +|PS-LB-I3|immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
414 +|PS-LB-I5|immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
415 +|PS-LB-T20-B|T20 threaded probe|0~~1MPa|0.5MPa air / gas or water pressure
423 423  
424 -The probe model field provides the convenient for server to identical how it should parse the 0~~20mA sensor value and get the correct value.
417 +The probe model field provides the convenient for server to identical how it should parse the 4~~20mA sensor value and get the correct value.
425 425  
426 426  
427 427  === 2.3.5 0~~20mA value (IDC_IN) ===
428 428  
429 429  
430 -The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
423 +The output value from **Pressure Probe**, use together with Probe Model to get the pressure value or water level.
431 431  
432 432  (% style="color:#037691" %)**Example**:
433 433  
... ... @@ -434,6 +434,11 @@
434 434  27AE(H) = 10158 (D)/1000 = 10.158mA.
435 435  
436 436  
430 +Instead of pressure probe, User can also connect a general 4~~20mA in this port to support different types of 4~~20mA sensors. below is the connection example:
431 +
432 +[[image:image-20230225154759-1.png||height="408" width="741"]]
433 +
434 +
437 437  === 2.3.6 0~~30V value ( pin VDC_IN) ===
438 438  
439 439  
... ... @@ -467,9 +467,27 @@
467 467  0x01: Interrupt Uplink Packet.
468 468  
469 469  
470 -=== 2.3.8 ​Decode payload in The Things Network ===
468 +=== (% id="cke_bm_109176S" style="display:none" %) (%%)2.3.8 Sensor value, FPORT~=7 ===
471 471  
472 472  
471 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:508.222px" %)
472 +|(% style="width:94px" %)(((
473 +**Size(bytes)**
474 +)))|(% style="width:43px" %)2|(% style="width:367px" %)n
475 +|(% style="width:94px" %)**Value**|(% style="width:43px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:367px" %)(((
476 +Voltage value, each 2 bytes is a set of voltage values.
477 +)))
478 +
479 +[[image:image-20230220171300-1.png||height="207" width="863"]]
480 +
481 +Multiple sets of data collected are displayed in this form：
482 +
483 +[voltage value1], [voltage value2], [voltage value3],…[voltage value n/2]
484 +
485 +
486 +=== 2.3.9 ​Decode payload in The Things Network ===
487 +
488 +
473 473  While using TTN network, you can add the payload format to decode the payload.
474 474  
475 475  
... ... @@ -525,7 +525,6 @@
525 525  [[image:1675145060812-420.png]]
526 526  
527 527  
528 -
529 529  After added, the sensor data arrive TTN, it will also arrive and show in Datacake.
530 530  
531 531  
... ... @@ -548,35 +548,35 @@
548 548  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
549 549  
550 550  
566 += 3. Configure PS-LB =
551 551  
552 -= 3. Configure PS-LB via AT Command or LoRaWAN Downlink =
568 +== 3.1 Configure Methods ==
553 553  
570 +PS-LB-NA supports below configure method:
554 554  
555 -Use can configure PS-LB via AT Command or LoRaWAN Downlink.
572 +* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
573 +* AT Command via UART Connection : See [[FAQ>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/#H7.FAQ]].
574 +* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
556 556  
557 -* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
558 -* LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
576 +== 3.2 General Commands ==
559 559  
560 -There are two kinds of commands to configure PS-LB, they are:
561 -
562 -* (% style="color:#037691" %)**General Commands**.
563 -
564 564  These commands are to configure:
565 565  
566 566  * General system settings like: uplink interval.
567 567  * LoRaWAN protocol & radio related command.
568 568  
569 -They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
583 +They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
570 570  
571 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
585 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
572 572  
573 573  
574 -* (% style="color:#037691" %)**Commands special design for PS-LB**
575 575  
589 +== 3.3 Commands special design for PS-LB ==
590 +
576 576  These commands only valid for PS-LB, as below:
577 577  
578 578  
579 -== 3.1 Set Transmit Interval Time ==
594 +=== 3.3.1 Set Transmit Interval Time ===
580 580  
581 581  
582 582  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -584,17 +584,14 @@
584 584  (% style="color:blue" %)**AT Command: AT+TDC**
585 585  
586 586  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
587 -|**Command Example**|**Function**|**Response**
588 -|AT+TDC=?|Show current transmit Interval|(((
602 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 137px;" %)**Function**|=**Response**
603 +|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
589 589  30000
590 -
591 591  OK
592 -
593 593  the interval is 30000ms = 30s
594 594  )))
595 -|AT+TDC=60000|Set Transmit Interval|(((
608 +|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
596 596  OK
597 -
598 598  Set transmit interval to 60000ms = 60 seconds
599 599  )))
600 600  
... ... @@ -602,40 +602,33 @@
602 602  
603 603  Format: Command Code (0x01) followed by 3 bytes time value.
604 604  
605 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
617 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
606 606  
607 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
608 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
619 +* Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
620 +* Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
609 609  
622 +=== 3.3.2 Set Interrupt Mode ===
610 610  
611 -== 3.2 Set Interrupt Mode ==
612 612  
613 -
614 614  Feature, Set Interrupt mode for GPIO_EXIT.
615 615  
616 616  (% style="color:blue" %)**AT Command: AT+INTMOD**
617 617  
618 618  (% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
619 -|**Command Example**|**Function**|**Response**
620 -|AT+INTMOD=?|Show current interrupt mode|(((
630 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 157px;" %)**Response**
631 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
621 621  0
622 -
623 623  OK
624 -
625 -the mode is 0 = No interruption
634 +the mode is 0 =Disable Interrupt
626 626  )))
627 -|AT+INTMOD=2|(((
636 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
628 628  Set Transmit Interval
638 +0. (Disable Interrupt),
639 +~1. (Trigger by rising and falling edge)
640 +2. (Trigger by falling edge)
641 +3. (Trigger by rising edge)
642 +)))|(% style="width:157px" %)OK
629 629  
630 -~1. (Disable Interrupt),
631 -
632 -2. (Trigger by rising and falling edge),
633 -
634 -3. (Trigger by falling edge)
635 -
636 -4. (Trigger by rising edge)
637 -)))|OK
638 -
639 639  (% style="color:blue" %)**Downlink Command: 0x06**
640 640  
641 641  Format: Command Code (0x06) followed by 3 bytes.
... ... @@ -642,10 +642,10 @@
642 642  
643 643  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
644 644  
645 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
646 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
650 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
651 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
647 647  
648 -== 3.3 Set the output time ==
653 +=== 3.3.3 Set the output time ===
649 649  
650 650  
651 651  Feature, Control the output 3V3 , 5V or 12V.
... ... @@ -652,68 +652,53 @@
652 652  
653 653  (% style="color:blue" %)**AT Command: AT+3V3T**
654 654  
655 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
656 -|(% style="width:156px" %)**Command Example**|(% style="width:236px" %)**Function**|(% style="width:117px" %)**Response**
657 -|(% style="width:156px" %)AT+3V3T=?|(% style="width:236px" %)Show 3V3 open time.|(% style="width:117px" %)(((
660 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:474px" %)
661 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 201px;" %)**Function**|=(% style="width: 116px;" %)**Response**
662 +|(% style="width:154px" %)AT+3V3T=?|(% style="width:201px" %)Show 3V3 open time.|(% style="width:116px" %)(((
658 658  0
659 -
660 660  OK
661 661  )))
662 -|(% style="width:156px" %)AT+3V3T=0|(% style="width:236px" %)Normally open 3V3 power supply.|(% style="width:117px" %)(((
666 +|(% style="width:154px" %)AT+3V3T=0|(% style="width:201px" %)Normally open 3V3 power supply.|(% style="width:116px" %)(((
663 663  OK
664 -
665 665  default setting
666 666  )))
667 -|(% style="width:156px" %)AT+3V3T=1000|(% style="width:236px" %)Close after a delay of 1000 milliseconds.|(% style="width:117px" %)(((
670 +|(% style="width:154px" %)AT+3V3T=1000|(% style="width:201px" %)Close after a delay of 1000 milliseconds.|(% style="width:116px" %)(((
668 668  OK
669 -
670 -
671 671  )))
672 -|(% style="width:156px" %)AT+3V3T=65535|(% style="width:236px" %)Normally closed 3V3 power supply.|(% style="width:117px" %)(((
673 +|(% style="width:154px" %)AT+3V3T=65535|(% style="width:201px" %)Normally closed 3V3 power supply.|(% style="width:116px" %)(((
673 673  OK
674 -
675 -
676 676  )))
677 677  
678 678  (% style="color:blue" %)**AT Command: AT+5VT**
679 679  
680 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
681 -|(% style="width:158px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:119px" %)**Response**
682 -|(% style="width:158px" %)AT+5VT=?|(% style="width:232px" %)Show 5V open time.|(% style="width:119px" %)(((
679 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:470px" %)
680 +|=(% style="width: 155px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 114px;" %)**Response**
681 +|(% style="width:155px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:114px" %)(((
683 683  0
684 -
685 685  OK
686 686  )))
687 -|(% style="width:158px" %)AT+5VT=0|(% style="width:232px" %)Normally closed 5V power supply.|(% style="width:119px" %)(((
685 +|(% style="width:155px" %)AT+5VT=0|(% style="width:196px" %)Normally closed 5V power supply.|(% style="width:114px" %)(((
688 688  OK
689 -
690 690  default setting
691 691  )))
692 -|(% style="width:158px" %)AT+5VT=1000|(% style="width:232px" %)Close after a delay of 1000 milliseconds.|(% style="width:119px" %)(((
689 +|(% style="width:155px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:114px" %)(((
693 693  OK
694 -
695 -
696 696  )))
697 -|(% style="width:158px" %)AT+5VT=65535|(% style="width:232px" %)Normally open 5V power supply.|(% style="width:119px" %)(((
692 +|(% style="width:155px" %)AT+5VT=65535|(% style="width:196px" %)Normally open 5V power supply.|(% style="width:114px" %)(((
698 698  OK
699 -
700 -
701 701  )))
702 702  
703 703  (% style="color:blue" %)**AT Command: AT+12VT**
704 704  
705 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
706 -|(% style="width:156px" %)**Command Example**|(% style="width:268px" %)**Function**|**Response**
707 -|(% style="width:156px" %)AT+12VT=?|(% style="width:268px" %)Show 12V open time.|(((
698 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:443px" %)
699 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 199px;" %)**Function**|=(% style="width: 83px;" %)**Response**
700 +|(% style="width:156px" %)AT+12VT=?|(% style="width:199px" %)Show 12V open time.|(% style="width:83px" %)(((
708 708  0
709 -
710 710  OK
711 711  )))
712 -|(% style="width:156px" %)AT+12VT=0|(% style="width:268px" %)Normally closed 12V power supply.|OK
713 -|(% style="width:156px" %)AT+12VT=500|(% style="width:268px" %)Close after a delay of 500 milliseconds.|(((
704 +|(% style="width:156px" %)AT+12VT=0|(% style="width:199px" %)Normally closed 12V power supply.|(% style="width:83px" %)OK
705 +|(% style="width:156px" %)AT+12VT=500|(% style="width:199px" %)Close after a delay of 500 milliseconds.|(% style="width:83px" %)(((
714 714  OK
715 -
716 -
717 717  )))
718 718  
719 719  (% style="color:blue" %)**Downlink Command: 0x07**
... ... @@ -722,151 +722,118 @@
722 722  
723 723  The first byte is which power, the second and third bytes are the time to turn on.
724 724  
725 -* Example 1: Downlink Payload: 070101F4  -> AT+3V3T=500
726 -* Example 2: Downlink Payload: 0701FFFF   -> AT+3V3T=65535
727 -* Example 3: Downlink Payload: 070203E8  -> AT+5VT=1000
728 -* Example 4: Downlink Payload: 07020000  -> AT+5VT=0
729 -* Example 5: Downlink Payload: 070301F4  -> AT+12VT=500
730 -* Example 6: Downlink Payload: 07030000  -> AT+12VT=0
715 +* Example 1: Downlink Payload: 070101F4  **~-~-->**  AT+3V3T=500
716 +* Example 2: Downlink Payload: 0701FFFF   **~-~-->**  AT+3V3T=65535
717 +* Example 3: Downlink Payload: 070203E8  **~-~-->**  AT+5VT=1000
718 +* Example 4: Downlink Payload: 07020000  **~-~-->**  AT+5VT=0
719 +* Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
720 +* Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
731 731  
732 -== 3.4 Set the Probe Model ==
722 +=== 3.3.4 Set the Probe Model ===
733 733  
734 734  
735 -(% style="color:blue" %)**AT Command: AT** **+PROBE**
725 +Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
736 736  
737 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
738 -|(% style="width:157px" %)**Command Example**|(% style="width:267px" %)**Function**|**Response**
739 -|(% style="width:157px" %)AT +PROBE =?|(% style="width:267px" %)Get or Set the probe model.|(((
740 -0
727 +**AT Command: AT** **+PROBE**
741 741  
742 -OK
743 -)))
744 -|(% style="width:157px" %)AT +PROBE =0003|(% style="width:267px" %)Set water depth sensor mode, 3m type.|OK
745 -|(% style="width:157px" %)AT +PROBE =0101|(% style="width:267px" %)Set pressure transmitters mode, first type.|(((
746 -OK
729 +AT+PROBE=aabb
747 747  
748 -
749 -)))
750 -|(% style="width:157px" %)AT +PROBE =0000|(% style="width:267px" %)Initial state, no settings.|(((
751 -OK
731 +When aa=00, it is the water depth mode, and the current is converted into the water depth value; bb is the probe at a depth of several meters.
752 752  
753 -
754 -)))
733 +When aa=01, it is the pressure mode, which converts the current into a pressure value;
755 755  
756 -(% style="color:blue" %)**Downlink Command: 0x08**
735 +bb represents which type of pressure sensor it is.
757 757  
758 -Format: Command Code (0x08) followed by 2 bytes.
737 +(A->01,B->02,C->03,D->04,E->05,F->06,G->07,H->08,I->09,J->0A,K->0B,L->0C)
759 759  
760 -* Example 1: Downlink Payload: 080003  -> AT+PROBE=0003
761 -* Example 2: Downlink Payload: 080101  -> AT+PROBE=0101
739 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
740 +|**Command Example**|**Function**|**Response**
741 +|AT +PROBE =?|Get or Set the probe model.|0
742 +OK
743 +|AT +PROBE =0003|Set water depth sensor mode, 3m type.|OK
744 +|(((
745 +AT +PROBE =000A
762 762  
763 -= 4. Battery & how to replace =
747 +
748 +)))|Set water depth sensor mode, 10m type.|OK
749 +|AT +PROBE =0101|Set pressure transmitters mode, first type(A).|OK
750 +|AT +PROBE =0000|Initial state, no settings.|OK
764 764  
765 -== 4.1 Battery Type ==
752 +**Downlink Command: 0x08**
766 766  
754 +Format: Command Code (0x08) followed by 2 bytes.
767 767  
768 -PS-LB is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>https://www.dropbox.com/sh/w9l2oa3ytpculph/AAAPtt-apH4lYfCj-2Y6lHvQa?dl=0]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
756 +* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
757 +* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
769 769  
759 +=== 3.3.5 Multiple collections are one uplink（Since firmware V1.1） ===
770 770  
771 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
772 772  
773 -[[image:1675146710956-626.png]]
762 +Added AT+STDC command to collect the voltage of VDC_INPUT multiple times and upload it at one time.
774 774  
764 +(% style="color:blue" %)**AT Command: AT** **+STDC**
775 775  
776 -Minimum Working Voltage for the PS-LB:
766 +AT+STDC=aa,bb,bb
777 777  
778 -PS-LB:  2.45v ~~ 3.6v
768 +(% style="color:#037691" %)**aa:**(%%)
769 +**0:** means disable this function and use TDC to send packets.
770 +**1:** means enable this function, use the method of multiple acquisitions to send packets.
771 +(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
772 +(% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
779 779  
774 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
775 +|**Command Example**|**Function**|**Response**
776 +|AT+STDC=?|Get the mode of multiple acquisitions and one uplink.|1,10,18
777 +OK
778 +|AT+STDC=1,10,18|Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(((
779 +Attention:Take effect after ATZ
780 780  
781 -== 4.2 Replace Battery ==
781 +OK
782 +)))
783 +|AT+STDC=0, 0,0|(((
784 +Use the TDC interval to send packets.(default)
782 782  
786 +
787 +)))|(((
788 +Attention:Take effect after ATZ
783 783  
784 -Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
790 +OK
791 +)))
785 785  
786 -And make sure the positive and negative pins match.
793 +(% style="color:blue" %)**Downlink Command: 0xAE**
787 787  
795 +Format: Command Code (0x08) followed by 5 bytes.
788 788  
789 -== 4.3 Power Consumption Analyze ==
797 +* Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
790 790  
799 += 4. Battery & Power Consumption =
791 791  
792 -Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
801 +PS-LB-NA uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
793 793  
803 + [[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
794 794  
795 -Instruction to use as below:
796 796  
806 += 5. OTA firmware update =
797 797  
798 -(% style="color:blue" %)**Step 1:**(%%) Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
799 799  
800 -[[https:~~/~~/www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0>>https://www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0]]
801 -
802 -
803 -(% style="color:blue" %)**Step 2:**(%%) Open it and choose
804 -
805 -* Product Model
806 -* Uplink Interval
807 -* Working Mode
808 -
809 -And the Life expectation in difference case will be shown on the right.
810 -
811 -[[image:1675146895108-304.png]]
812 -
813 -
814 -The battery related documents as below:
815 -
816 -* [[Battery Dimension>>https://www.dropbox.com/s/ox5g9njwjle7aw3/LSN50-Battery-Dimension.pdf?dl=0]],
817 -* [[Lithium-Thionyl Chloride Battery datasheet, Tech Spec>>https://www.dropbox.com/sh/d4oyfnp8o94180o/AABQewCNSh5GPeQH86UxRgQQa?dl=0]]
818 -* [[Lithium-ion Battery-Capacitor datasheet>>https://www.dropbox.com/s/791gjes2lcbfi1p/SPC_1520_datasheet.jpg?dl=0]], [[Tech Spec>>https://www.dropbox.com/s/4pkepr9qqqvtzf2/SPC1520%20Technical%20Specification20171123.pdf?dl=0]]
819 -
820 -[[image:image-20230131145708-3.png]]
821 -
822 -
823 -=== 4.3.1 ​Battery Note ===
824 -
825 -
826 -The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
827 -
828 -
829 -=== 4.3.2 Replace the battery ===
830 -
831 -
832 -You can change the battery in the PS-LB.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
833 -
834 -The default battery pack of PS-LB includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
835 -
836 -
837 -= 5. Remote Configure device =
838 -
839 -== 5.1 Connect via BLE ==
840 -
841 -
842 -Please see this instruction for how to configure via BLE: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]]
843 -
844 -
845 -== 5.2 AT Command Set ==
846 -
847 -
848 -
849 -= 6. OTA firmware update =
850 -
851 -
852 852  Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
853 853  
854 854  
855 -= 7. FAQ =
812 += 6. FAQ =
856 856  
857 -== 7.1 How to use AT Command to access device? ==
814 +== 6.1 How to use AT Command via UART to access device? ==
858 858  
859 859  
860 860  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
861 861  
862 862  
863 -== 7.2 How to update firmware via UART port? ==
820 +== 6.2 How to update firmware via UART port? ==
864 864  
865 865  
866 866  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
867 867  
868 868  
869 -== 7.3 How to change the LoRa Frequency Bands/Region? ==
826 +== 6.3 How to change the LoRa Frequency Bands/Region? ==
870 870  
871 871  
872 872  You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
... ... @@ -873,13 +873,13 @@
873 873  When downloading the images, choose the required image file for download. ​
874 874  
875 875  
876 -= 8. Order Info =
833 += 7. Order Info =
877 877  
878 878  
879 879  [[image:image-20230131153105-4.png]]
880 880  
881 881  
882 -= 9. ​Packing Info =
839 += 8. ​Packing Info =
883 883  
884 884  
885 885  (% style="color:#037691" %)**Package Includes**:
... ... @@ -893,7 +893,7 @@
893 893  * Package Size / pcs : cm
894 894  * Weight / pcs : g
895 895  
896 -= 10. Support =
853 += 9. Support =
897 897  
898 898  
899 899  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20230201090514-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +560.9 KB
Content
image-20230220171300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20230222174559-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content
image-20230225154759-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +468.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0