Skip to Content
Last modified by Xiaoling on 2025/07/10 16:21
From version 37.3
edited by Xiaoling
on 2023/01/31 14:09
Change comment: There is no comment for this version
To version 9.1
edited by Xiaoling
on 2023/01/30 17:38
Change comment: Uploaded new attachment "1675071521308-426.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,10 +1,12 @@
1 -[[image:image-20230131115217-1.png]]
1 +[[image:image-20230130161957-1.jpeg||height="493" width="493"]] [[image:image-20230130162222-3.png||height="495" width="477"]]​​​​​​​
2 2  
3 3  
4 4  
5 +
5 5  **Table of Contents：**
6 6  
7 7  
9 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]
8 8  
9 9  
10 10  
... ... @@ -18,30 +18,36 @@
18 18  
19 19  
20 20  
21 -= 1. Introduction =
22 22  
23 -== 1.1 What is LoRaWAN Pressure Sensor ==
24 +1. Introduction
25 +11. ​What is LoRaWAN Pressure Sensor
24 24  
25 -
26 26  The Dragino PS-LB series sensors are **LoRaWAN Pressure Sensor** for Internet of Things solution. PS-LB can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.
27 27  
29 +
28 28  The PS-LB series sensors include **Thread Installation Type** and **Immersion Type**, it supports different pressure range which can be used for different measurement requirement.
29 29  
32 +
30 30  The LoRa wireless technology used in PS-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
31 31  
35 +
32 32  PS-LB supports BLE configure and wireless OTA update which make user easy to use.
33 33  
38 +
34 34  PS-LB is powered by **8500mAh Li-SOCI2 battery**, it is designed for long term use up to 5 years.
35 35  
41 +
36 36  Each PS-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
37 37  
38 -[[image:1675071321348-194.png]]
39 39  
45 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
40 40  
41 41  
42 -== 1.2 ​Features ==
43 43  
44 44  
50 +
51 +*
52 +*1. ​Features
45 45  * LoRaWAN 1.0.3 Class A
46 46  * Ultra-low power consumption
47 47  * Measure air / gas or water pressure
... ... @@ -56,9 +56,9 @@
56 56  * 8500mAh Battery for long term use
57 57  
58 58  
59 -== 1.3 Specification ==
67 +1.
68 +11. Specification
60 60  
61 -
62 62  **Micro Controller:**
63 63  
64 64  * MCU: 48Mhz ARM
... ... @@ -77,6 +77,7 @@
77 77  * RX sensitivity: down to -139 dBm.
78 78  * Excellent blocking immunity
79 79  
88 +
80 80  **Current Input Measuring :**
81 81  
82 82  * Range: 0 ~~ 20mA
... ... @@ -83,6 +83,7 @@
83 83  * Accuracy: 0.02mA
84 84  * Resolution: 0.001mA
85 85  
95 +
86 86  **Voltage Input Measuring:**
87 87  
88 88  * Range: 0 ~~ 30v
... ... @@ -89,6 +89,7 @@
89 89  * Accuracy: 0.02v
90 90  * Resolution: 0.001v
91 91  
102 +
92 92  **Battery:**
93 93  
94 94  * Li/SOCI2 un-chargeable battery
... ... @@ -97,6 +97,7 @@
97 97  * Max continuously current: 130mA
98 98  * Max boost current: 2A, 1 second
99 99  
111 +
100 100  **Power Consumption**
101 101  
102 102  * Sleep Mode: 5uA @ 3.3v
... ... @@ -103,51 +103,56 @@
103 103  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
104 104  
105 105  
106 -== 1.4 Probe Types ==
107 107  
108 -=== 1.4.1 Thread Installation Type ===
109 109  
120 +1.
121 +11. Probe Types
122 +111. Thread Installation Type
110 110  
111 -[[image:1675071448299-229.png]]
112 112  
113 -* Hersman Pressure Transmitter
114 -* Measuring Range: -0.1 ~~ 0 ~~ 60MPa, see order info.
115 -* Accuracy: 0.2% F.S
116 -* Long-Term Stability: 0.2% F.S ±0.05%
117 -* Overload 200% F.S
118 -* Zero Temperature Drift: 0.03% FS/℃(≤100Kpa), 0.02%FS/℃(＞100Kpa)
119 -* FS Temperature Drift: 0.003% FS/℃(≤100Kpa), 0.002%FS/℃(＞100Kpa)
120 -* Storage temperature: -30℃~~80℃
121 -* Operating temperature: -20℃~~60℃
122 -* Connector Type: Various Types, see order info
125 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
123 123  
124 124  
125 -=== 1.4.2 Immersion Type ===
128 +* **Hersman Pressure Transmitter**
129 +* **Measuring Range: -0.1 ~~ 0 ~~ 60MPa, see order info.**
130 +* **Accuracy: 0.2% F.S**
131 +* **Long-Term Stability: 0.2% F.S ±0.05%**
132 +* **Overload 200% F.S**
133 +* **Zero Temperature Drift: 0.03% FS/℃(≤100Kpa), 0.02%FS/℃(＞100Kpa)**
134 +* **FS Temperature Drift: 0.003% FS/℃(≤100Kpa), 0.002%FS/℃(＞100Kpa)**
135 +* **Storage temperature: -30℃~~80℃**
136 +* **Operating temperature: -20℃~~60℃**
137 +* **Connector Type: Various Types, see order info**
126 126  
127 127  
128 -[[image:1675071521308-426.png]]
140 +1.
141 +11.
142 +111. Immersion Type
129 129  
130 -* Immersion Type, Probe IP Level: IP68
131 -* Measuring Range: Measure range can be customized, up to 100m.
132 -* Accuracy: 0.2% F.S
133 -* Long-Term Stability: ±0.2% F.S / Year
134 -* Overload 200% F.S
135 -* Zero Temperature Drift: ±2% F.S)
136 -* FS Temperature Drift: ±2% F.S
137 -* Storage temperature: -30℃~~80℃
138 -* Operating temperature: -40℃~~85℃
139 -* Material: 316 stainless steels
144 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]
140 140  
141 141  
142 -== 1.5 Probe Dimension ==
147 +* **Immersion Type, Probe IP Level: IP68**
148 +* **Measuring Range: Measure range can be customized, up to 100m.**
149 +* **Accuracy: 0.2% F.S**
150 +* **Long-Term Stability: ±0.2% F.S / Year**
151 +* **Overload 200% F.S**
152 +* **Zero Temperature Drift: ±2% F.S)**
153 +* **FS Temperature Drift: ±2% F.S**
154 +* **Storage temperature: -30℃~~80℃**
155 +* **Operating temperature: -40℃~~85℃**
156 +* **Material: 316 stainless steels**
143 143  
144 144  
159 +1.
160 +11. Probe Dimension
145 145  
146 146  
147 -== 1.6 Application and Installation ==
148 148  
149 -=== 1.6.1 Thread Installation Type ===
150 150  
165 +1.
166 +11. Application and Installation
167 +111. Thread Installation Type
151 151  
152 152  **Application:**
153 153  
... ... @@ -159,52 +159,62 @@
159 159  * Constant Pressure Water Supply
160 160  * Liquid Pressure measuring
161 161  
179 +
180 +
162 162  Order the suitable thread size and install to measure the air / liquid pressure
163 163  
164 -[[image:1675071670469-145.png]]
183 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]
165 165  
166 166  
167 -=== 1.6.2 Immersion Type ===
168 168  
187 +1.
188 +11.
189 +111. Immersion Type
169 169  
170 170  **Application:**
171 171  
172 172  Liquid & Water Pressure / Level detect.
173 173  
174 -[[image:1675071725288-579.png]]
195 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
175 175  
176 176  
177 177  The Immersion Type pressure sensor is shipped with the probe and device separately. When user got the device, below is the wiring to for connect the probe to the device.
178 178  
179 179  
180 -[[image:1675071736646-450.png]]
201 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]]
181 181  
182 182  
183 -[[image:1675071776102-240.png]]
184 184  
205 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.png]]
185 185  
186 -== 1.7 Sleep mode and working mode ==
187 187  
188 188  
189 -**Deep Sleep Mode: **Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
209 +1.
210 +11. Sleep mode and working mode
190 190  
191 -**Working Mode:** In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
192 192  
213 +**Deep Sleep Mode: Sensor doesn’t have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.**
193 193  
194 -== 1.8 Button & LEDs ==
195 195  
216 +**Working Mode: In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.**
196 196  
197 -[[image:1675071855856-879.png]]
198 198  
199 199  
200 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
201 -|(% style="width:138px" %)**Behavior on ACT**|(% style="width:100px" %)**Function**|**Action**
202 -|(% style="width:138px" %)Pressing ACT between 1s < time < 3s|(% style="width:100px" %)Send an uplink|(((
220 +
221 +1.
222 +11. Button & LEDs
223 +
224 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.png]]
225 +
226 +
227 +
228 +|**Behavior on ACT**|**Function**|**Action**
229 +|Pressing ACT between 1s < time < 3s|Send an uplink|(((
203 203  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, **blue led** will blink once.
204 204  
205 205  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
206 206  )))
207 -|(% style="width:138px" %)Pressing ACT for more than 3s|(% style="width:100px" %)Active Device|(((
234 +|Pressing ACT for more than 3s|Active Device|(((
208 208  **Green led** will fast blink 5 times, device will enter **OTA mode** for 3 seconds. And then start to JOIN LoRaWAN network.
209 209  
210 210  **Green led** will solidly turn on for 5 seconds after joined in network.
... ... @@ -211,19 +211,22 @@
211 211  
212 212  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
213 213  )))
214 -|(% style="width:138px" %)Fast press ACT 5 times.|(% style="width:100px" %)Deactivate Device|red led will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
241 +|Fast press ACT 5 times.|Deactivate Device|red led will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
215 215  
216 216  
217 217  
218 -== 1.9 Pin Mapping ==
219 219  
220 220  
221 -[[image:1675072568006-274.png]]
247 +1.
248 +11. Pin Mapping
222 222  
250 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]
223 223  
224 -== 1.10 BLE connection ==
225 225  
226 226  
254 +1.
255 +11. BLE connection
256 +
227 227  PS-LB support BLE remote configure.
228 228  
229 229  
... ... @@ -236,36 +236,33 @@
236 236  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
237 237  
238 238  
239 -== 1.11 Mechanical ==
240 240  
241 241  
271 +1.
272 +11. Mechanical
242 242  
274 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]
243 243  
244 -[[image:1675143884058-338.png]]
276 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]
245 245  
278 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]]
246 246  
247 -[[image:1675143899218-599.png]]
248 248  
249 249  
250 -[[image:1675143909447-639.png]]
251 251  
283 +1. Configure PS-LB to connect to LoRaWAN network
284 +11. How it works
252 252  
253 -= 2. Configure PS-LB to connect to LoRaWAN network =
254 -
255 -== 2.1 How it works ==
256 -
257 -
258 258  The PS-LB is configured as **LoRaWAN OTAA Class A** mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
259 259  
260 260  
289 +1.
290 +11. ​Quick guide to connect to LoRaWAN server (OTAA)
261 261  
262 -== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
263 -
264 -
265 265  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
266 266  
267 267  
268 -[[image:1675144005218-297.png]]
295 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
269 269  
270 270  
271 271  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
... ... @@ -275,47 +275,59 @@
275 275  
276 276  Each PS-LB is shipped with a sticker with the default device EUI as below:
277 277  
278 -[[image:image-20230131134744-2.jpeg]]
279 279  
306 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]
280 280  
281 281  
309 +
310 +
311 +
282 282  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
283 283  
284 284  
285 285  **Register the device**
286 286  
287 -[[image:1675144099263-405.png]]
317 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
288 288  
289 289  
290 290  **Add APP EUI and DEV EUI**
291 291  
292 -[[image:1675144117571-832.png]]
293 293  
323 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
294 294  
325 +
295 295  **Add APP EUI in the application**
296 296  
297 297  
298 -[[image:1675144143021-195.png]]
329 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
299 299  
300 300  
301 301  **Add APP KEY**
302 302  
303 -[[image:1675144157838-392.png]]
334 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
304 304  
336 +
305 305  **Step 2**: Activate on PS-LB
306 306  
307 307  
308 308  Press the button for 5 seconds to activate the PS-LB.
309 309  
342 +
310 310  **Green led** will fast blink 5 times, device will enter **OTA mode** for 3 seconds. And then start to JOIN LoRaWAN network. **Green led** will solidly turn on for 5 seconds after joined in network.
311 311  
345 +
312 312  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
313 313  
314 314  
349 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
315 315  
316 -== 2.3 ​Uplink Payload ==
317 317  
318 318  
353 +
354 +1.
355 +11. ​Uplink Payload
356 +
357 +
319 319  Uplink payloads have two types:
320 320  
321 321  * Distance Value: Use FPORT=2
... ... @@ -324,24 +324,28 @@
324 324  The application server should parse the correct value based on FPORT settings.
325 325  
326 326  
327 -=== 2.3.1 Device Status, FPORT~=5 ===
328 328  
367 +1.
368 +11.
369 +111. Device Status, FPORT=5
329 329  
330 330  Include device configure status. Once PS-LB Joined the network, it will uplink this message to the server.
331 331  
373 +
332 332  Users can also use the downlink command(0x26 01) to ask PS-LB to resend this uplink.
333 333  
334 334  
335 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
336 336  |(% colspan="6" %)**Device Status (FPORT=5)**
337 -|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|**1**|**1**|**2**
338 -|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|Frequency Band|Sub-band|BAT
378 +|**Size (bytes)**|**1**|**2**|**1**|**1**|**2**
379 +|**Value**|Sensor Model|Firmware Version|Frequency Band|Sub-band|BAT
339 339  
381 +
340 340  Example parse in TTNv3
341 341  
342 -[[image:1675144504430-490.png]]
384 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]]
343 343  
344 344  
387 +
345 345  **Sensor Model**: For PS-LB, this value is 0x16
346 346  
347 347  **Firmware Version**: 0x0100, Means: v1.0.0 version
... ... @@ -395,25 +395,37 @@
395 395  Ex2: 0x0B49 = 2889mV
396 396  
397 397  
398 -=== 1.3.2 Sensor value, FPORT~=2 ===
399 399  
442 +1.
443 +11.
444 +111. Sensor value, FPORT=2
400 400  
446 +
447 +
401 401  Uplink payload includes in total 9 bytes.
402 402  
403 403  
404 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
405 -|(% style="width:97px" %)(((
406 -**Size(bytes)**
407 -)))|(% style="width:48px" %)**2**|(% style="width:58px" %)**2**|**2**|**2**|**1**
408 -|(% style="width:97px" %)**Value**|(% style="width:48px" %)[[BAT>>path:#bat]]|(% style="width:58px" %)[[Probe Model>>path:#Probe_Model]]|0 ~~ 20mA value|[[0 ~~~~ 30v value>>path:#Voltage_30v]]|[[IN1 &IN2 Interrupt  flag>>path:#Int_pin]]
451 +|(((
452 +**Size**
409 409  
410 -[[image:1675144608950-310.png]]
454 +**(bytes)**
455 +)))|**2**|**2**|**2**|**2**|**1**
456 +|**Value**|[[BAT>>path:#bat]]|[[Probe Model>>path:#Probe_Model]]|0 ~~ 20mA value|[[0 ~~~~ 30v value>>path:#Voltage_30v]]|[[IN1 &IN2 Interrupt  flag>>path:#Int_pin]]
411 411  
412 412  
413 413  
414 -=== 2.3.3 Battery Info ===
415 415  
416 416  
462 +
463 +
464 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
465 +
466 +
467 +
468 +1.
469 +11.
470 +111. Battery Info
471 +
417 417  Check the battery voltage for PS-LB.
418 418  
419 419  Ex1: 0x0B45 = 2885mV
... ... @@ -421,45 +421,55 @@
421 421  Ex2: 0x0B49 = 2889mV
422 422  
423 423  
424 -=== 2.3.4 Probe Model ===
479 +1.
480 +11.
481 +111. Probe Model
425 425  
483 +PS-LB has different kind of probe, 0~~20mA represent the full scale of the measuring range. So a 15mA output means different meaning for different probe.
426 426  
427 -PS-LB has different kind of probe, 0~~20mA represent the full scale of the measuring range. So a 15mA output means different meaning for different probe. 
428 428  
429 -
430 430  For example.
431 431  
432 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
433 -|(% style="width:111px" %)**Part Number**|(% style="width:158px" %)**Probe Used**|**0~~20mA scale**|**Example: 10mA meaning**
434 -|(% style="width:111px" %)PS-LB-I3|(% style="width:158px" %)immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
435 -|(% style="width:111px" %)PS-LB-I5|(% style="width:158px" %)immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
488 +|**Part Number**|**Probe Used**|**0~~20mA scale**|**Example: 10mA meaning**
489 +|PS-LB-I3|immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
490 +|PS-LB-I5|immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
436 436  
492 +
437 437  The probe model field provides the convenient for server to identical how it should parse the 0~~20mA sensor value and get the correct value.
438 438  
439 439  
440 -=== 2.3.5 0~~20mA value (IDC_IN) ===
496 +1.
497 +11.
498 +111. 0~~20mA value (IDC_IN)
441 441  
442 442  
443 443  The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
444 444  
503 +
445 445  **Example**:
446 446  
447 447  27AE(H) = 10158 (D)/1000 = 10.158mA.
448 448  
449 449  
450 -=== 2.3.6 0~~30V value ( pin VDC_IN) ===
509 +1.
510 +11.
511 +111. 0~~30V value ( pin VDC_IN)
451 451  
452 452  
453 453  Measure the voltage value. The range is 0 to 30V.
454 454  
516 +
455 455  **Example**:
456 456  
457 457  138E(H) = 5006(D)/1000= 5.006V
458 458  
459 459  
460 -=== 2.3.7 IN1&IN2&INT pin ===
522 +1.
523 +11.
524 +111. IN1&IN2&INT pin
461 461  
462 462  
527 +
463 463  IN1 and IN2 are used as digital input pins.
464 464  
465 465  **Example**:
... ... @@ -469,8 +469,10 @@
469 469  09 (H) :(0x09&0x04)>>2=0    IN2 pin is low level.
470 470  
471 471  
537 +
472 472  This data field shows if this packet is generated by **Interrupt Pin** or not. [[Click here>>path:#Int_mod]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
473 473  
540 +
474 474  **Example:**
475 475  
476 476  09 (H) : (0x09&0x02)>>1=1    The level of the interrupt pin.
... ... @@ -480,81 +480,106 @@
480 480  0x01: Interrupt Uplink Packet.
481 481  
482 482  
483 -=== 2.3.8 ​Decode payload in The Things Network ===
484 484  
485 485  
552 +
553 +
554 +
555 +1.
556 +11.
557 +111. ​Decode payload in The Things Network
558 +
486 486  While using TTN network, you can add the payload format to decode the payload.
487 487  
488 488  
489 -[[image:1675144839454-913.png]]
562 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
490 490  
564 +PS-LB TTN Payload Decoder:
491 491  
492 -PS-LB TTN Payload Decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
566 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
493 493  
494 494  
495 -== 2.4 Uplink Interval ==
569 +1.
570 +11. Uplink Interval
496 496  
572 +The PS-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link:
497 497  
498 -The PS-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval||style="background-color: rgb(255, 255, 255);"]]
574 +[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_AT_Commands_and_Downlink_Commands#Change_Uplink_Interval>>url:http://wiki.dragino.com/index.php?title=End_Device_AT_Commands_and_Downlink_Commands#Change_Uplink_Interval]]
499 499  
500 500  
501 -== 2.5 Show Data in DataCake IoT Server ==
502 502  
578 +1.
579 +11. ​Show Data in DataCake IoT Server
503 503  
504 504  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
505 505  
506 506  
507 -**Step 1: **Be sure that your device is programmed and properly connected to the network at this time.
584 +**Step 1**: Be sure that your device is programmed and properly connected to the network at this time.
508 508  
509 -**Step 2:** To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
586 +**Step 2**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
510 510  
511 511  
512 -[[image:1675144951092-237.png]]
589 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
513 513  
514 514  
515 -[[image:1675144960452-126.png]]
592 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
516 516  
517 517  
518 -**Step 3:** Create an account or log in Datacake.
595 +Step 3: Create an account or log in Datacake.
519 519  
520 -**Step 4:** Create PS-LB product.
597 +Step 4: Create PS-LB product.
521 521  
522 -[[image:1675145004465-869.png]]
599 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
523 523  
524 524  
525 -[[image:1675145018212-853.png]]
526 526  
603 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
527 527  
528 528  
606 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
529 529  
530 -[[image:1675145029119-717.png]]
531 531  
609 +Step 5: add payload decode
532 532  
533 -**Step 5: **add payload decode
534 534  
535 -[[image:1675145051360-659.png]]
612 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
536 536  
614 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
537 537  
538 -[[image:1675145060812-420.png]]
539 539  
540 540  
541 -
542 542  After added, the sensor data arrive TTN, it will also arrive and show in Datacake.
543 543  
544 544  
545 -[[image:1675145081239-376.png]]
621 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]]
546 546  
547 547  
548 -== 2.6 Frequency Plans ==
549 549  
550 550  
626 +
627 +
628 +
629 +
630 +
631 +
632 +
633 +
634 +
635 +
636 +
637 +
638 +
639 +1.
640 +11. Frequency Plans
641 +
551 551  The PS-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
552 552  
553 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
554 554  
645 +[[https:~~/~~/wiki.dragino.com/index.php?title=End_Device_Frequency_Band>>url:https://wiki.dragino.com/index.php?title=End_Device_Frequency_Band]]
555 555  
556 556  
557 557  
649 +
558 558  1.
559 559  11. ​Firmware Change Log
560 560  
... ... @@ -614,6 +614,7 @@
614 614  Set transmit interval to 60000ms = 60 seconds
615 615  )))
616 616  
709 +
617 617  **Downlink Command: 0x01**
618 618  
619 619  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -624,6 +624,8 @@
624 624  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
625 625  
626 626  
720 +
721 +
627 627  1.
628 628  11. Set Interrupt Mode
629 629  
... ... @@ -648,6 +648,7 @@
648 648  1. (Trigger by rising edge)
649 649  )))|OK
650 650  
746 +
651 651  **Downlink Command: 0x06**
652 652  
653 653  Format: Command Code (0x06) followed by 3 bytes.
... ... @@ -657,6 +657,7 @@
657 657  * Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
658 658  * Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
659 659  
756 +
660 660  1.
661 661  11. Set the output time
662 662  
... ... @@ -686,6 +686,7 @@
686 686  
687 687  )))
688 688  
786 +
689 689  **AT Command: AT+5VT**
690 690  
691 691  |**Command Example**|**Function**|**Response**
... ... @@ -710,6 +710,7 @@
710 710  
711 711  )))
712 712  
811 +
713 713  **AT Command: AT+12VT**
714 714  
715 715  |**Command Example**|**Function**|**Response**
... ... @@ -725,6 +725,7 @@
725 725  
726 726  )))
727 727  
827 +
728 728  **Downlink Command: 0x07**
729 729  
730 730  Format: Command Code (0x07) followed by 3 bytes.
... ... @@ -738,6 +738,7 @@
738 738  * Example 5: Downlink Payload: 070301F4  -> AT+12VT=500
739 739  * Example 6: Downlink Payload: 07030000  -> AT+12VT=0
740 740  
841 +
741 741  1.
742 742  11. Set the Probe Model
743 743  
... ... @@ -761,6 +761,7 @@
761 761  
762 762  )))
763 763  
865 +
764 764  **Downlink Command: 0x08**
765 765  
766 766  Format: Command Code (0x08) followed by 2 bytes.
... ... @@ -770,6 +770,8 @@
770 770  
771 771  
772 772  
875 +
876 +
773 773  1. Battery & how to replace
774 774  11. Battery Type
775 775  
... ... @@ -798,6 +798,7 @@
798 798  1.
799 799  11. Power Consumption Analyze
800 800  
905 +
801 801  Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
802 802  
803 803  
... ... @@ -826,6 +826,8 @@
826 826  * [[Lithium-Thionyl Chloride Battery>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/ER18505_datasheet-EN.pdf]] datasheet, [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/ER18505_datasheet_PM-ER18505-S-02-LF_EN.pdf]]
827 827  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
828 828  
934 +
935 +
829 829  |(((
830 830  JST-XH-2P connector
831 831  )))
... ... @@ -834,7 +834,7 @@
834 834  
835 835  
836 836  
837 -1.
944 +1.
838 838  11.
839 839  111. ​Battery Note
840 840  
... ... @@ -858,6 +858,7 @@
858 858  1. Remote Configure device
859 859  11. Connect via BLE
860 860  
968 +
861 861  Please see this instruction for how to configure via BLE:
862 862  
863 863  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]]
... ... @@ -866,6 +866,8 @@
866 866  1.
867 867  11. AT Command Set
868 868  
977 +
978 +
869 869  1. OTA firmware update
870 870  
871 871  Please see this link for how to do OTA firmware update.
... ... @@ -893,6 +893,7 @@
893 893  1.
894 894  11. How to change the LoRa Frequency Bands/Region
895 895  
1006 +
896 896  You can follow the instructions for [[how to upgrade image>>path:#3ygebqi]].
897 897  When downloading the images, choose the required image file for download. ​
898 898  
... ... @@ -914,6 +914,7 @@
914 914  
915 915  * PS-LB LoRaWAN Pressure Sensor
916 916  
1028 +
917 917  **Dimension and weight**:
918 918  
919 919  * Device Size: cm
... ... @@ -923,6 +923,8 @@
923 923  
924 924  
925 925  
1038 +
1039 +
926 926  1. ​Support
927 927  
928 928  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1675071670469-145.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -766.3 KB
Content
1675071725288-579.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -688.0 KB
Content
1675071736646-450.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -768.9 KB
Content
1675071776102-240.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -164.7 KB
Content
1675071855856-879.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -18.2 KB
Content
1675072568006-274.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -508.9 KB
Content
1675143884058-338.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
1675143899218-599.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -5.6 KB
Content
1675143909447-639.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
1675144005218-297.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -88.6 KB
Content
1675144035100-313.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -131.3 KB
Content
1675144099263-405.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -59.6 KB
Content
1675144117571-832.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -53.8 KB
Content
1675144143021-195.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.1 KB
Content
1675144157838-392.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -65.2 KB
Content
1675144504430-490.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.2 KB
Content
1675144608950-310.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.5 KB
Content
1675144839454-913.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -59.2 KB
Content
1675144951092-237.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -62.2 KB
Content
1675144960452-126.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -66.6 KB
Content
1675145004465-869.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -112.9 KB
Content
1675145018212-853.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -199.6 KB
Content
1675145029119-717.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.6 KB
Content
1675145051360-659.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -49.2 KB
Content
1675145060812-420.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.1 KB
Content
1675145081239-376.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20230131115217-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -259.3 KB
Content
image-20230131134744-2.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content