Skip to Content
Last modified by Xiaoling on 2025/07/10 16:21
From version 142.2
edited by Xiaoling
on 2025/06/10 15:26
Change comment: There is no comment for this version
To version 121.1
edited by Xiaoling
on 2025/04/01 16:35
Change comment: Uploaded new attachment "image-20250401163539-2.jpeg", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,8 @@
1 1  
2 2  
3 3  
4 -[[image:image-20240109154731-4.png||data-xwiki-image-style-alignment="center" height="546" width="769"]]
4 +(% style="text-align:center" %)
5 +[[image:image-20240109154731-4.png||height="671" width="945"]]
5 5  
6 6  
7 7  
... ... @@ -47,7 +47,9 @@
47 47  Each PS-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
48 48  )))
49 49  
51 +[[image:1675071321348-194.png]]
50 50  
53 +
51 51  == 1.2 ​Features ==
52 52  
53 53  
... ... @@ -133,7 +133,7 @@
133 133  === 1.4.2 Immersion Type ===
134 134  
135 135  
136 -[[image:image-20240109160445-5.png||height="199" width="150"]]
139 +[[image:image-20240109160445-5.png||height="221" width="166"]]
137 137  
138 138  * Immersion Type, Probe IP Level: IP68
139 139  * Measuring Range: Measure range can be customized, up to 100m.
... ... @@ -141,15 +141,11 @@
141 141  * Long-Term Stability: ±0.2% F.S / Year
142 142  * Storage temperature: -30°C~~80°C
143 143  * Operating temperature: 0°C~~50°C
144 -* Probe Material: 316 stainless steels
145 -* Cable model specifications： CGYPU 5*0.2mm2
146 -* Usage characteristics of Cable
147 -1） Operating temperature：-40℃— +70℃
148 -2） -30℃ bending cable 15 times of outer diameter can work normally
147 +* Material: 316 stainless steels
149 149  
150 150  === 1.4.3 Wireless Differential Air Pressure Sensor ===
151 151  
152 -[[image:image-20240511174954-1.png||height="193" width="193"]]
151 +[[image:image-20240511174954-1.png]]
153 153  
154 154  * Measuring Range: -100KPa~~0~~100KPa(Optional measuring range).
155 155  * Accuracy: 0.5% F.S, resolution is 0.05%.
... ... @@ -225,40 +225,36 @@
225 225  
226 226  Size of wind pressure transmitter:
227 227  
228 -[[image:image-20240513094047-2.png||height="462" width="518"]]
227 +[[image:image-20240513094047-2.png]]
229 229  
230 -(% style="color:red" %)**Note: The above dimensions are measured by hand, and the numerical error of the shell is within ±0.2mm.**
229 +Note: The above dimensions are measured by hand, and the numerical error of the shell is within ±0.2mm.
231 231  
232 232  
233 233  == 1.6 Sleep mode and working mode ==
234 234  
235 235  
236 -**Deep Sleep Mode:** Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
235 +(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
237 237  
238 -**Working Mode: **In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
237 +(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
239 239  
240 240  
241 241  == 1.7 Button & LEDs ==
242 242  
243 243  
244 -[[image:image-20250419092225-1.jpeg]]
243 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]](% style="display:none" %)
245 245  
246 246  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
247 -|=(% style="width: 167px;background-color:#4F81BD;color:white" %)Behavior on ACT|=(% style="width: 117px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 226px;background-color:#4F81BD;color:white" %)Action
248 -|[[image:1749521239729-288.png]] 1~~3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
249 -
250 -
251 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, blue led will blink once.
246 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
247 +|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
248 +If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
252 252  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
253 253  )))
254 -|[[image:1749521245437-170.png]] >3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
255 -
256 -
257 -Green led will fast blink 5 times, device will enter OTA mode for 3 seconds. And then start to JOIN LoRaWAN network.
258 -Green led will solidly turn on for 5 seconds after joined in network.
251 +|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
252 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
253 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
259 259  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
260 260  )))
261 -|[[image:1749521282079-419.png]] x5|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)Red led will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
256 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
262 262  
263 263  == 1.8 Pin Mapping ==
264 264  
... ... @@ -286,13 +286,13 @@
286 286  === 1.10.1 for LB version ===
287 287  
288 288  
289 -[[image:image-20250401163530-1.jpeg]]
284 +[[image:image-20240109160800-6.png]]
290 290  
291 291  
292 292  === 1.10.2 for LS version ===
293 293  
294 294  
295 -[[image:image-20250401163539-2.jpeg]]
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1||alt="image-20231231203439-3.png"]]
296 296  
297 297  
298 298  = 2. Configure PS-LB/LS to connect to LoRaWAN network =
... ... @@ -300,7 +300,7 @@
300 300  == 2.1 How it works ==
301 301  
302 302  
303 -The PS-LB/LS is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
298 +The PS-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
304 304  
305 305  
306 306  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -308,13 +308,13 @@
308 308  
309 309  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
310 310  
311 -[[image:image-20250419162538-1.png]]
306 +[[image:1675144005218-297.png]]
312 312  
313 313  
314 314  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
315 315  
316 316  
317 -(% style="color:blue" %)**Step 1: Create a device in TTN with the OTAA keys from PS-LB/LS.**
312 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from PS-LB/LS.
318 318  
319 319  Each PS-LB/LS is shipped with a sticker with the default device EUI as below:
320 320  
... ... @@ -323,48 +323,33 @@
323 323  
324 324  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
325 325  
326 -**Create the application.**
327 327  
328 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SAC01L_LoRaWAN_Temperature%26Humidity_Sensor_User_Manual/WebHome/image-20250423093843-1.png?width=756&height=264&rev=1.1||alt="image-20250423093843-1.png"]]
322 +(% style="color:blue" %)**Register the device**
329 329  
330 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111305-2.png?width=1000&height=572&rev=1.1||alt="image-20240907111305-2.png"]]
324 +[[image:1675144099263-405.png]]
331 331  
332 332  
333 -**Add devices to the created Application.**
327 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
334 334  
335 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111659-3.png?width=977&height=185&rev=1.1||alt="image-20240907111659-3.png"]]
329 +[[image:1675144117571-832.png]]
336 336  
337 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111820-5.png?width=975&height=377&rev=1.1||alt="image-20240907111820-5.png"]]
338 338  
332 +(% style="color:blue" %)**Add APP EUI in the application**
339 339  
340 -**Enter end device specifics manually.**
341 341  
342 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907112136-6.png?width=697&height=687&rev=1.1||alt="image-20240907112136-6.png"]]
335 +[[image:1675144143021-195.png]]
343 343  
344 344  
345 -**Add DevEUI and AppKey. Customize a platform ID for the device.**
338 +(% style="color:blue" %)**Add APP KEY**
346 346  
347 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907112427-7.png?rev=1.1||alt="image-20240907112427-7.png"]]
340 +[[image:1675144157838-392.png]]
348 348  
342 +(% style="color:blue" %)**Step 2:**(%%) Activate on PS-LB/LS
349 349  
350 -(% style="color:blue" %)**Step 2: Add decoder.**
351 351  
352 -In TTN, user can add a custom payload so it shows friendly reading.
353 -
354 -Click this link to get the decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/]]
355 -
356 -Below is TTN screen shot:
357 -
358 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS25-LBLDS25-LS--LoRaWAN_LiDAR_Distance_Auto-Clean_Sensor_User_Manual/WebHome/image-20241009140556-1.png?width=1184&height=488&rev=1.1||alt="image-20241009140556-1.png" height="488" width="1184"]]
359 -
360 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS25-LBLDS25-LS--LoRaWAN_LiDAR_Distance_Auto-Clean_Sensor_User_Manual/WebHome/image-20241009140603-2.png?width=1168&height=562&rev=1.1||alt="image-20241009140603-2.png" height="562" width="1168"]]
361 -
362 -
363 -(% style="color:blue" %)**Step 3: Activate on PS-LB/LS**
364 -
365 365  Press the button for 5 seconds to activate the PS-LB/LS.
366 366  
367 -Green led will fast blink 5 times, device will enter OTA mode for 3 seconds. And then start to JOIN LoRaWAN network. Green led will solidly turn on for 5 seconds after joined in network.
347 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
368 368  
369 369  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
370 370  
... ... @@ -380,8 +380,8 @@
380 380  
381 381  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
382 382  |(% colspan="6" style="background-color:#4f81bd; color:white" %)**Device Status (FPORT=5)**
383 -|(% style="background-color:#f2f2f2; width:103px" %)Size (bytes)|(% style="background-color:#f2f2f2; width:72px" %)1|(% style="background-color:#f2f2f2" %)2|(% style="background-color:#f2f2f2; width:91px" %)1|(% style="background-color:#f2f2f2; width:86px" %)1|(% style="background-color:#f2f2f2; width:44px" %)2
384 -|(% style="background-color:#f2f2f2; width:103px" %)Value|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
363 +|(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
364 +|(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
385 385  
386 386  Example parse in TTNv3
387 387  
... ... @@ -388,11 +388,11 @@
388 388  [[image:1675144504430-490.png]]
389 389  
390 390  
391 -Sensor Model: For PS-LB/LS, this value is 0x16
371 +(% style="color:#037691" %)**Sensor Model**(%%): For PS-LB/LS, this value is 0x16
392 392  
393 -Firmware Version: 0x0100, Means: v1.0.0 version
373 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
394 394  
395 -Frequency Band:
375 +(% style="color:#037691" %)**Frequency Band**:
396 396  
397 397  *0x01: EU868
398 398  
... ... @@ -423,7 +423,7 @@
423 423  *0x0e: MA869
424 424  
425 425  
426 -Sub-Band:
406 +(% style="color:#037691" %)**Sub-Band**:
427 427  
428 428  AU915 and US915:value 0x00 ~~ 0x08
429 429  
... ... @@ -432,7 +432,7 @@
432 432  Other Bands: Always 0x00
433 433  
434 434  
435 -Battery Info:
415 +(% style="color:#037691" %)**Battery Info**:
436 436  
437 437  Check the battery voltage.
438 438  
... ... @@ -447,10 +447,10 @@
447 447  Uplink payload includes in total 9 bytes.
448 448  
449 449  
450 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
430 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
451 451  |(% style="background-color:#4f81bd; color:white; width:97px" %)(((
452 452  **Size(bytes)**
453 -)))|(% style="background-color:#4f81bd; color:white; width:50px" %)**2**|(% style="background-color:#4f81bd; color:white; width:71px" %)**2**|(% style="background-color:#4f81bd; color:white; width:98px" %)**2**|(% style="background-color:#4f81bd; color:white; width:73px" %)**2**|(% style="background-color:#4f81bd; color:white; width:122px" %)**1**
433 +)))|(% style="background-color:#4f81bd; color:white; width:48px" %)**2**|(% style="background-color:#4f81bd; color:white; width:71px" %)**2**|(% style="background-color:#4f81bd; color:white; width:98px" %)**2**|(% style="background-color:#4f81bd; color:white; width:73px" %)**2**|(% style="background-color:#4f81bd; color:white; width:122px" %)**1**
454 454  |(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
455 455  
456 456  [[image:1675144608950-310.png]]
... ... @@ -471,8 +471,9 @@
471 471  
472 472  PS-LB/LS has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe. 
473 473  
474 -For example.
475 475  
455 +**For example.**
456 +
476 476  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
477 477  |(% style="background-color:#4f81bd; color:white" %)**Part Number**|(% style="background-color:#4f81bd; color:white" %)**Probe Used**|(% style="background-color:#4f81bd; color:white" %)**4~~20mA scale**|(% style="background-color:#4f81bd; color:white" %)**Example: 12mA meaning**
478 478  |(% style="background-color:#f2f2f2" %)PS-LB/LS-I3|(% style="background-color:#f2f2f2" %)immersion type with 3 meters cable|(% style="background-color:#f2f2f2" %)0~~3 meters|(% style="background-color:#f2f2f2" %)1.5 meters pure water
... ... @@ -482,29 +482,12 @@
482 482  The probe model field provides the convenient for server to identical how it should parse the 4~~20mA sensor value and get the correct value.
483 483  
484 484  
485 -When connecting to current sensors sold by our company, you can convert current readings to corresponding values by simply configuring the [[AT+PROBE>>||anchor="H3.3.4SettheProbeModel"]] command. If you prefer not to configure this command on the sensor, you can uniformly handle the conversion in the payload decoder instead.
486 -
487 -**Examples for decoder implementation:**
488 -
489 -~1. For AT+PROBE=0005, add the following processing in your decoder:
490 -
491 -[[image:image-20250512144042-1.png]]
492 -
493 -[[image:image-20250512144122-2.png]]
494 -
495 -2. For AT+PROBE=0102, add the following processing in your decoder(Corresponding to the position shown in the above screenshot).
496 -
497 -bytes[i]=0x01;bytes[1+i]=0x02;
498 -
499 -bytes[2]=0x01;bytes[3]=0x02;
500 -
501 -
502 502  === 2.3.5 0~~20mA value (IDC_IN) ===
503 503  
504 504  
505 -The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
469 +The output value from **Pressure Probe**, use together with Probe Model to get the pressure value or water level.
506 506  
507 -Example:
471 +(% style="color:#037691" %)**Example**:
508 508  
509 509  27AE(H) = 10158 (D)/1000 = 10.158mA.
510 510  
... ... @@ -519,7 +519,7 @@
519 519  
520 520  Measure the voltage value. The range is 0 to 30V.
521 521  
522 -Example:
486 +(% style="color:#037691" %)**Example**:
523 523  
524 524  138E(H) = 5006(D)/1000= 5.006V
525 525  
... ... @@ -529,7 +529,7 @@
529 529  
530 530  IN1 and IN2 are used as digital input pins.
531 531  
532 -Example:
496 +(% style="color:#037691" %)**Example**:
533 533  
534 534  09 (H): (0x09&0x08)>>3=1    IN1 pin is high level.
535 535  
... ... @@ -536,9 +536,9 @@
536 536  09 (H): (0x09&0x04)>>2=0    IN2 pin is low level.
537 537  
538 538  
539 -This data field shows if this packet is generated by Interrupt Pin or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
503 +This data field shows if this packet is generated by (% style="color:blue" %)**Interrupt Pin** (%%)or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
540 540  
541 -Example:
505 +(% style="color:#037691" %)**Example:**
542 542  
543 543  09 (H): (0x09&0x02)>>1=1    The level of the interrupt pin.
544 544  
... ... @@ -555,8 +555,6 @@
555 555  **Size(bytes)**
556 556  )))|(% style="background-color:#4f81bd; color:white; width:35px" %)**2**|(% style="background-color:#4f81bd; color:white; width:400px" %)**n**
557 557  |(% style="width:94px" %)Value|(% style="width:43px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:367px" %)(((
558 -
559 -
560 560  Voltage value, each 2 bytes is a set of voltage values.
561 561  )))
562 562  
... ... @@ -589,9 +589,9 @@
589 589  
590 590  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
591 591  
592 -Step 1: Be sure that your device is programmed and properly connected to the network at this time.
554 +(% style="color:blue" %)**Step 1: **(%%)Be sure that your device is programmed and properly connected to the network at this time.
593 593  
594 -Step 2: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
556 +(% style="color:blue" %)**Step 2:**(%%) To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
595 595  
596 596  [[image:1675144951092-237.png]]
597 597  
... ... @@ -599,9 +599,9 @@
599 599  [[image:1675144960452-126.png]]
600 600  
601 601  
602 -Step 3: Create an account or log in Datacake.
564 +(% style="color:blue" %)**Step 3:**(%%) Create an account or log in Datacake.
603 603  
604 -Step 4: Create PS-LB/LS product.
566 +(% style="color:blue" %)**Step 4:** (%%)Create PS-LB/LS product.
605 605  
606 606  [[image:1675145004465-869.png]]
607 607  
... ... @@ -612,7 +612,7 @@
612 612  [[image:1675145029119-717.png]]
613 613  
614 614  
615 -Step 5: add payload decode
577 +(% style="color:blue" %)**Step 5: **(%%)add payload decode
616 616  
617 617  [[image:1675145051360-659.png]]
618 618  
... ... @@ -636,13 +636,13 @@
636 636  
637 637  PS-LB uses Unix TimeStamp format based on
638 638  
639 -[[image:image-20250401163826-3.jpeg]]
601 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861618065-927.png?width=705&height=109&rev=1.1||alt="1652861618065-927.png" height="109" width="705"]]
640 640  
641 641  Users can get this time from the link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
642 642  
643 643  Below is the converter example:
644 644  
645 -[[image:image-20250401163906-4.jpeg]]
607 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861637105-371.png?width=732&height=428&rev=1.1||alt="1652861637105-371.png"]]
646 646  
647 647  
648 648  === 2.6.2 Set Device Time ===
... ... @@ -651,16 +651,16 @@
651 651  There are two ways to set the device's time:
652 652  
653 653  
654 -~1. Through LoRaWAN MAC Command (Default settings)
616 +(% style="color:blue" %)**1. Through LoRaWAN MAC Command (Default settings)**
655 655  
656 656  Users need to set SYNCMOD=1 to enable sync time via the MAC command.
657 657  
658 658  Once CPL01 Joined the LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL01. If CPL01 fails to get the time from the server, CPL01 will use the internal time and wait for the next time request ~[[[via Device Status (FPORT=5)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.1DeviceStatus2CFPORT3D5]]].
659 659  
660 -Note: LoRaWAN Server needs to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature.
622 +(% style="color:red" %)**Note: LoRaWAN Server needs to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature.**
661 661  
662 662  
663 - 2. Manually Set Time
625 +(% style="color:blue" %)** 2. Manually Set Time**
664 664  
665 665  Users need to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
666 666  
... ... @@ -670,8 +670,8 @@
670 670  Users can poll sensor values based on timestamps. Below is the downlink command.
671 671  
672 672  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:470px" %)
673 -|=(% colspan="4" style="width: 160px; background-color:#4F81BD;color:white" %)Downlink Command to poll Open/Close status (0x31)
674 -|(% style="background-color:#f2f2f2; width:67px" %)1byte|(% style="background-color:#f2f2f2; width:145px" %)4bytes|(% style="background-color:#f2f2f2; width:133px" %)4bytes|(% style="background-color:#f2f2f2; width:163px" %)1byte
635 +|=(% colspan="4" style="width: 160px; background-color:#4F81BD;color:white" %)**Downlink Command to poll Open/Close status (0x31)**
636 +|(% style="background-color:#f2f2f2; width:67px" %)**1byte**|(% style="background-color:#f2f2f2; width:145px" %)**4bytes**|(% style="background-color:#f2f2f2; width:133px" %)**4bytes**|(% style="background-color:#f2f2f2; width:163px" %)**1byte**
675 675  |(% style="background-color:#f2f2f2; width:67px" %)31|(% style="background-color:#f2f2f2; width:145px" %)Timestamp start|(% style="background-color:#f2f2f2; width:133px" %)(((
676 676  Timestamp end
677 677  )))|(% style="background-color:#f2f2f2; width:163px" %)Uplink Interval
... ... @@ -690,30 +690,36 @@
690 690  
691 691  The Datalog uplinks will use below payload format.
692 692  
693 -Retrieval data payload:
655 +**Retrieval data payload:**
694 694  
695 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
657 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
696 696  |=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
697 -Size(bytes)
698 -)))|=(% style="width: 70px; background-color:#4F81BD;color:white" %)2|=(% style="width: 70px; background-color:#4F81BD;color:white" %)2|=(% style="width: 80px; background-color: rgb(79, 129, 189); color: white;" %)2|=(% style="width: 150px; background-color: rgb(79, 129, 189); color: white;" %)1|=(% style="width: 80px; background-color: rgb(79, 129, 189); color: white;" %)4
659 +**Size(bytes)**
660 +)))|=(% style="width: 40px; background-color:#4F81BD;color:white" %)**2**|=(% style="width: 55px; background-color:#4F81BD;color:white" %)**2**|=(% style="width: 83px; background-color: rgb(79, 129, 189); color: white;" %)**2**|=(% style="width: 201px; background-color: rgb(79, 129, 189); color: white;" %)**1**|=(% style="width: 86px; background-color: rgb(79, 129, 189); color: white;" %)**4**
699 699  |(% style="width:103px" %)Value|(% style="width:68px" %)(((
700 -Probe_mod
662 +Probe
663 +
664 +_mod
701 701  )))|(% style="width:104px" %)(((
702 -VDC_intput_V
666 +VDC
667 +
668 +_intput_V
703 703  )))|(% style="width:83px" %)(((
704 -IDC_intput_mA
670 +IDC
671 +
672 +_intput_mA
705 705  )))|(% style="width:201px" %)(((
706 706  IN1_pin_level& IN2_pin_level& Exti_pin_level&Exti_status
707 707  )))|(% style="width:86px" %)Unix Time Stamp
708 708  
709 -IN1_pin_level & IN2_pin_level & Exti_pin_level & Exti_status:
677 +**IN1_pin_level & IN2_pin_level & Exti_pin_level & Exti_status:**
710 710  
711 711  [[image:image-20250117104847-4.png]]
712 712  
713 713  
714 -No ACK Message:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for PNACKMD=1 feature)
682 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
715 715  
716 -Poll Message Flag: 1: This message is a poll message reply.
684 +**Poll Message Flag**: 1: This message is a poll message reply.
717 717  
718 718  * Poll Message Flag is set to 1.
719 719  
... ... @@ -721,17 +721,17 @@
721 721  
722 722  For example, in US915 band, the max payload for different DR is:
723 723  
724 -a) DR0: max is 11 bytes so one entry of data
692 +**a) DR0:** max is 11 bytes so one entry of data
725 725  
726 -b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
694 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
727 727  
728 -c) DR2: total payload includes 11 entries of data
696 +**c) DR2:** total payload includes 11 entries of data
729 729  
730 -d) DR3: total payload includes 22 entries of data.
698 +**d) DR3: **total payload includes 22 entries of data.
731 731  
732 732  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
733 733  
734 -Example:
702 +**Example:**
735 735  
736 736  If PS-LB-NA has below data inside Flash:
737 737  
... ... @@ -745,46 +745,53 @@
745 745   Stop time: 6788DB63 = time 25/1/16 10:11:47
746 746  
747 747  
748 -PA-LB-NA will uplink this payload.
716 +**PA-LB-NA will uplink this payload.**
749 749  
750 750  [[image:image-20250117104827-2.png]]
751 751  
752 -
720 +(((
753 753  00001B620000406788D9BF  00000D130000406788D9FB  00000D120000406788DA37  00000D110000406788DA73  00000D100000406788DAAF  00000D100000406788DAEB  00000D0F0000406788DB27  00000D100000406788DB63
722 +)))
754 754  
755 -
724 +(((
756 756  Where the first 11 bytes is for the first entry :
726 +)))
757 757  
758 -
728 +(((
759 759  0000  0D10  0000  40  6788DB63
730 +)))
760 760  
732 +(((
733 +**Probe_mod **= 0x0000 = 0000
734 +)))
761 761  
762 -Probe_mod = 0x0000 = 0000
736 +(((
737 +**VDC_intput_V **= 0x0D10/1000=3.344V
763 763  
739 +**IDC_intput_mA **= 0x0000/1000=0mA
740 +)))
764 764  
765 -VDC_intput_V = 0x0D10/1000=3.344V
742 +(((
743 +**IN1_pin_level **= (0x40& 0x08)? "High":"Low" = 0(Low)
766 766  
767 -IDC_intput_mA = 0x0000/1000=0mA
745 +**IN2_pin_level = (**0x40& 0x04)? "High":"Low" = 0(Low)
768 768  
747 +**Exti_pin_level = (**0x40& 0x02)? "High":"Low" = 0(Low)
769 769  
770 -IN1_pin_level = (0x40& 0x08)? "High":"Low" = 0(Low)
749 +**Exti_status = (**0x40& 0x01)? "True":"False" = 0(False)
750 +)))
771 771  
772 -IN2_pin_level = (0x40& 0x04)? "High":"Low" = 0(Low)
752 +(((
753 +**Unix time** is 0x6788DB63 = 1737022307s = 2025/1/16 10:11:47
754 +)))
773 773  
774 -Exti_pin_level = (0x40& 0x02)? "High":"Low" = 0(Low)
756 +**Its data format is:**
775 775  
776 -Exti_status = (0x40& 0x01)? "True":"False" = 0(False)
758 +[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level**, **IN2_pin_level, Exti_pin_level, water_deep, Data_time],[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level**, **IN2_pin_level, Exti_pin_level, water_deep, Data_time],...
777 777  
760 +(% style="color:red" %)**Note: water_deep in the data needs to be converted using decoding to get it.**
778 778  
779 -Unix time is 0x6788DB63 = 1737022307s = 2025/1/16 10:11:47
780 780  
781 -Its data format is:
782 -
783 -[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level, IN2_pin_level, Exti_pin_level, water_deep, Data_time],[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level, IN2_pin_level, Exti_pin_level, water_deep, Data_time],...
784 -
785 -Note: water_deep in the data needs to be converted using decoding to get it.
786 -
787 -
788 788  === 2.6.5 Decoder in TTN V3 ===
789 789  
790 790  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652862574387-195.png?width=722&height=359&rev=1.1||alt="1652862574387-195.png" height="359" width="722"]]
... ... @@ -811,47 +811,47 @@
811 811  
812 812  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
813 813  |(% style="background-color:#4f81bd; color:white; width:97px" %)(((
814 -Size(bytes)
815 -)))|(% style="background-color:#4f81bd; color:white; width:48px" %)2|(% style="background-color:#4f81bd; color:white; width:71px" %)2|(% style="background-color:#4f81bd; color:white; width:98px" %)2|(% style="background-color:#4f81bd; color:white; width:73px" %)2|(% style="background-color:#4f81bd; color:white; width:122px" %)1
816 -|(% style="width:98px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)(((
789 +**Size(bytes)**
790 +)))|(% style="background-color:#4f81bd; color:white; width:48px" %)**2**|(% style="background-color:#4f81bd; color:white; width:71px" %)**2**|(% style="background-color:#4f81bd; color:white; width:98px" %)**2**|(% style="background-color:#4f81bd; color:white; width:73px" %)**2**|(% style="background-color:#4f81bd; color:white; width:122px" %)**1**
791 +|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)(((
817 817  [[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]] & ROC_flag
818 818  )))
819 819  
820 -IN1 &IN2 , Interrupt  flag , ROC_flag:
795 +(% style="color:blue" %)**IN1 &IN2 , Interrupt  flag , ROC_flag:**
821 821  
822 822  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:515px" %)
823 -|(% style="background-color:#4f81bd; color:white; width:50px" %)Size(bit)|(% style="background-color:#4f81bd; color:white; width:60px" %)bit7|(% style="background-color:#4f81bd; color:white; width:62px" %)bit6|(% style="background-color:#4f81bd; color:white; width:62px" %)bit5|(% style="background-color:#4f81bd; color:white; width:65px" %)bit4|(% style="background-color:#4f81bd; color:white; width:56px" %)bit3|(% style="background-color:#4f81bd; color:white; width:55px" %)bit2|(% style="background-color:#4f81bd; color:white; width:55px" %)bit1|(% style="background-color:#4f81bd; color:white; width:50px" %)bit0
798 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:62px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:62px" %)**bit5**|(% style="background-color:#4f81bd; color:white; width:65px" %)**bit4**|(% style="background-color:#4f81bd; color:white; width:56px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:55px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:55px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:50px" %)**bit0**
824 824  |(% style="width:75px" %)Value|(% style="width:89px" %)IDC_Roc_flagL|(% style="width:46.5834px" %)IDC_Roc_flagH|(% style="width:1px" %)VDC_Roc_flagL|(% style="width:89px" %)VDC_Roc_flagH|(% style="width:89px" %)IN1_pin_level|(% style="width:103px" %)IN2_pin_level|(% style="width:103px" %)Exti_pin_level|(% style="width:103px" %)Exti_status
825 825  
826 -* IDC_Roc_flagL
801 +* (% style="color:#037691" %)**IDC_Roc_flagL**
827 827  
828 -80 (H): (0x80&0x80)=80(H)=1000 0000(B)  bit7=1, "TRUE", This uplink is triggered when the decrease in the IDC compared to the last ROC refresh exceeds the set threshold.
803 +80 (H): (0x80&0x80)=80(H)=**1**000 0000(B)  bit7=1, "TRUE", This uplink is triggered when the decrease in the IDC compared to the last ROC refresh exceeds the set threshold.
829 829  
830 830  60 (H): (0x60&0x80)=0  bit7=0, "FALSE", This uplink is not triggered when the decrease in the IDC compared to the last ROC refresh exceeds the set threshold.
831 831  
832 832  
833 -* IDC_Roc_flagH
808 +* (% style="color:#037691" %)**IDC_Roc_flagH**
834 834  
835 -60 (H): (0x60&0x40)=60(H)=01000 0000(B)  bit6=1, "TRUE", This uplink is triggered when the increase in the value of the IDC compared to the last ROC refresh exceeds the set threshold.
810 +60 (H): (0x60&0x40)=60(H)=0**1**000 0000(B)  bit6=1, "TRUE", This uplink is triggered when the increase in the value of the IDC compared to the last ROC refresh exceeds the set threshold.
836 836  
837 837  80 (H): (0x80&0x40)=0  bit6=0, "FALSE", This uplink is not triggered when the increase in the value of the IDC compared to the last ROC refresh exceeds the set threshold.
838 838  
839 839  
840 -* VDC_Roc_flagL
815 +* (% style="color:#037691" %)**VDC_Roc_flagL**
841 841  
842 -20 (H): (0x20&0x20)=20(H)=0010 0000(B)  bit5=1, "TRUE", This uplink is triggered when the decrease in the VDC compared to the last ROC refresh exceeds the set threshold.
817 +20 (H): (0x20&0x20)=20(H)=00**1**0 0000(B)  bit5=1, "TRUE", This uplink is triggered when the decrease in the VDC compared to the last ROC refresh exceeds the set threshold.
843 843  
844 844  90 (H): (0x90&0x20)=0  bit5=0, "FALSE", This uplink is not triggered when the decrease in the VDC compared to the last ROC refresh exceeds the set threshold.
845 845  
846 846  
847 -* VDC_Roc_flagH
822 +* (% style="color:#037691" %)**VDC_Roc_flagH**
848 848  
849 -90 (H): (0x90&0x10)=10(H)=0001 0000(B)  bit4=1, "TRUE", This uplink is triggered when the increase in the value of the VDC compared to the last ROC refresh exceeds the set threshold.
824 +90 (H): (0x90&0x10)=10(H)=000**1** 0000(B)  bit4=1, "TRUE", This uplink is triggered when the increase in the value of the VDC compared to the last ROC refresh exceeds the set threshold.
850 850  
851 851  20 (H): (0x20&0x10)=0  bit4=0, "FALSE", This uplink is not triggered when the increase in the value of the VDC compared to the last ROC refresh exceeds the set threshold.
852 852  
853 853  
854 -* IN1_pin_level & IN2_pin_level
829 +* (% style="color:#037691" %)**IN1_pin_level & IN2_pin_level**
855 855  
856 856  IN1 and IN2 are used as digital input pins.
857 857  
... ... @@ -860,15 +860,15 @@
860 860  80 (H): (0x09&0x04)=0    IN2 pin is low level.
861 861  
862 862  
863 -* Exti_pin_level &Exti_status
838 +* (% style="color:#037691" %)**Exti_pin_level &Exti_status**
864 864  
865 865  This data field shows whether the packet is generated by an interrupt pin.
866 866  
867 -Note: The Internet pin of the old motherboard is a separate pin in the screw terminal, and the interrupt pin of the new motherboard(SIB V1.3) is the GPIO_EXTI pin.
842 +Note: The Internet pin of the old motherboard is a separate pin in the screw terminal, and the interrupt pin of the new motherboard(SIB V1.3) is the **GPIO_EXTI** pin.
868 868  
869 -Exti_pin_level:  80 (H): (0x80&0x02)=0  "low", The level of the interrupt pin.
844 +**Exti_pin_level:**  80 (H): (0x80&0x02)=0  "low", The level of the interrupt pin.
870 870  
871 -Exti_status: 80 (H): (0x80&0x01)=0  "False", Normal uplink packet.
846 +**Exti_status: **80 (H): (0x80&0x01)=0  "False", Normal uplink packet.
872 872  
873 873  
874 874  === 2.8.2 Set the Report on Change ===
... ... @@ -879,61 +879,71 @@
879 879  
880 880  ==== 2.8.2.1 Wave alarm mode ====
881 881  
882 -
883 883  Feature: By setting the detection period and a change value, the IDC/VDC variable is monitored whether it exceeds the set change value. If this change value is exceeded, the ROC uplink is sent and the comparison value is flushed.
884 884  
885 -* Change value: The amount by which the next detection value increases/decreases relative to the previous detection value.
886 -* Comparison value: A parameter to compare with the latest ROC test.
859 +* (% style="color:#037691" %)**Change value: **(%%)The amount by which the next detection value increases/decreases relative to the previous detection value.
860 +* (% style="color:#037691" %)**Comparison value:**(%%) A parameter to compare with the latest ROC test.
887 887  
888 -AT Command: AT+ROC
862 +(% style="color:blue" %)**AT Command: AT+ROC**
889 889  
890 890  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
891 -|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)Command Example|=(% style="width: 154px; background-color: rgb(79, 129, 189); color: white;" %)Parameters|=(% style="width: 193px; background-color: rgb(79, 129, 189); color: white;" %)Response/Explanation
865 +|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 154px; background-color: rgb(79, 129, 189); color: white;" %)**Parameters**|=(% style="width: 197px; background-color: rgb(79, 129, 189); color: white;" %)**Response/Explanation**
892 892  |(% style="width:143px" %)AT+ROC=?|(% style="width:154px" %)Show current ROC setting|(% style="width:197px" %)(((
893 893  0,0,0,0(default)
894 894  OK
895 895  )))
896 896  |(% colspan="1" rowspan="4" style="width:143px" %)(((
871 +
872 +
873 +
874 +
897 897  AT+ROC=a,b,c,d
898 898  )))|(% style="width:154px" %)(((
899 -**a:** Enable or disable the ROC
877 +
878 +
879 +
880 +
881 +
882 +
883 +**a**: Enable or disable the ROC
900 900  )))|(% style="width:197px" %)(((
901 901  **0:** off
902 902  **1:** Turn on the wave alarm mode, send the ROC uplink when the increment exceeds the set parameter and refresh the comparison value.
903 -**2:** Turn on the wave alarm mode, send the ROC uplink when the increment exceeds the set parameter and refresh the comparison value. In addition, the comparison value is refreshed when the device sends packets ([[TDC>>||anchor="H3.3.1SetTransmitIntervalTime"]] or [[ACT>>||anchor="H1.7Button26LEDs"]]).
887 +
888 +**2: **Turn on the wave alarm mode, send the ROC uplink when the increment exceeds the set parameter and refresh the comparison value. In addition, the comparison value is refreshed when the device sends packets ([[TDC>>||anchor="H3.3.1SetTransmitIntervalTime"]] or [[ACT>>||anchor="H1.7Button26LEDs"]]).
904 904  )))
905 -|(% style="width:154px" %)**b:** Set the detection interval|(% style="width:197px" %)(((
890 +|(% style="width:154px" %)**b**: Set the detection interval|(% style="width:197px" %)(((
906 906  Range:  0~~65535s
907 907  )))
908 -|(% style="width:154px" %)**c:** Setting the IDC change value|(% style="width:197px" %)Unit: uA
909 -|(% style="width:154px" %)**d:** Setting the VDC change value|(% style="width:197px" %)Unit: mV
893 +|(% style="width:154px" %)**c**: Setting the IDC change value|(% style="width:197px" %)Unit: uA
894 +|(% style="width:154px" %)**d**: Setting the VDC change value|(% style="width:197px" %)Unit: mV
910 910  
911 -Example:
896 +**Example:**
912 912  
913 -* AT+ROC=0,0,0,0  ~/~/ The ROC function is not used.
898 +* AT+ROC=0,0,0,0  ~/~/The ROC function is not used.
914 914  * AT+ROC=1,60,3000, 500  ~/~/ Check value every 60 seconds. lf there is change in IDC (>3mA) or VDC (>500mV), sends an ROC uplink, and the comparison value is refreshed.
915 915  * AT+ROC=1,60,3000,0  ~/~/ Check value every 60 seconds. lf there is change in IDC (>3mA), send an ROC uplink and the comparison value of IDC is refreshed. dd=0 Means doesn't monitor Voltage.
916 916  * AT+ROC=2,60,3000,0  ~/~/ Check value every 60 seconds. lf there is change in IDC (>3mA), send an ROC uplink and the comparison value of IDC is refreshed. dd=0 Means doesn't monitor Voltage. In addition, if the change in the IDC does not exceed 3mA, then the ROC uplink is not sent, and the comparison value is not refreshed by the ROC uplink packet. However, if the device TDC time arrives, or if the user manually sends packets, then the IDC comparison value is also refreshed.
917 917  
918 -Downlink Command: 0x09 aa bb cc dd
903 +(% style="color:blue" %)**Downlink Command: 0x09 aa bb cc dd**
919 919  
920 920  Format: Function code (0x09) followed by 4 bytes.
921 921  
922 -aa: 1 byte; Set the wave alarm mode.
907 +(% style="color:blue" %)**aa: **(% style="color:#037691" %)**1 byte;**(%%) Set the wave alarm mode.
923 923  
924 -bb: 2 bytes; Set the detection interval. (second)
909 +(% style="color:blue" %)**bb: **(% style="color:#037691" %)**2 bytes;**(%%) Set the detection interval. (second)
925 925  
926 -cc: 2 bytes; Setting the IDC change threshold. (uA)
911 +(% style="color:blue" %)**cc: **(% style="color:#037691" %)**2 bytes;**(%%) Setting the IDC change threshold. (uA)
927 927  
928 -dd: 2 bytes; Setting the VDC change threshold. (mV)
913 +(% style="color:blue" %)**dd: **(% style="color:#037691" %)**2 bytes;**(%%) Setting the VDC change threshold. (mV)
929 929  
930 -Example:
915 +**Example:**
931 931  
932 -* Downlink Payload: 09 01 00 3C 0B B8 01 F4  ~/~/ Equal to AT+ROC=1,60,3000, 500
933 -* Downlink Payload: 09 01 00 3C 0B B8 00 00  ~/~/ Equal to AT+ROC=1,60,3000,0
934 -* Downlink Payload: 09 02 00 3C 0B B8 00 00  ~/~/ Equal to AT+ROC=2,60,3000,0
917 +* Downlink Payload: **09 01 00 3C 0B B8 01 F4 ** ~/~/Equal to AT+ROC=1,60,3000, 500
918 +* Downlink Payload: **09 01 00 3C 0B B8 00 00 ** ~/~/Equal to AT+ROC=1,60,3000,0
919 +* Downlink Payload: **09 02 00 3C 0B B8 00 00 ** ~/~/Equal to AT+ROC=2,60,3000,0
935 935  
936 -Screenshot of parsing example in TTN:
921 +(% style="color:blue" %)**Screenshot of parsing example in TTN:**
937 937  
938 938  * AT+ROC=1,60,3000, 500.
939 939  
... ... @@ -942,67 +942,72 @@
942 942  
943 943  ==== 2.8.2.2 Over-threshold alarm mode ====
944 944  
945 -
946 946  Feature: Monitors whether the IDC/VDC exceeds the threshold by setting the detection period and threshold. Alarm if the threshold is exceeded.
947 947  
948 -AT Command: AT+ROC=3,a,b,c,d,e
932 +(% style="color:blue" %)**AT Command: AT+ROC=3,a,b,c,d,e**
949 949  
950 950  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
951 -|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)Command Example|=(% style="width: 160px; background-color: rgb(79, 129, 189); color: white;" %)Parameters|=(% style="width: 187px; background-color: rgb(79, 129, 189); color: white;" %)Response/Explanation
935 +|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 160px; background-color: rgb(79, 129, 189); color: white;" %)**Parameters**|=(% style="width: 185px; background-color: rgb(79, 129, 189); color: white;" %)**Response/Explanation**
952 952  |(% style="width:143px" %)AT+ROC=?|(% style="width:160px" %)Show current ROC setting|(% style="width:185px" %)(((
953 953  0,0,0,0(default)
954 954  OK
955 955  )))
956 956  |(% colspan="1" rowspan="5" style="width:143px" %)(((
957 -AT+ROC=3,a,b,c,d,e
941 +
942 +
943 +
944 +
945 +AT+ROC=(% style="color:blue" %)**3**(%%),a,b,c,d,e
958 958  )))|(% style="width:160px" %)(((
959 -**a:** Set the detection interval
947 +**a: **Set the detection interval
960 960  )))|(% style="width:185px" %)(((
961 961  Range:  0~~65535s
962 962  )))
963 -|(% style="width:160px" %)**b:** Set the IDC alarm trigger condition|(% style="width:185px" %)(((
951 +|(% style="width:160px" %)**b**: Set the IDC alarm trigger condition|(% style="width:185px" %)(((
964 964  **0:** Less than the set IDC threshold, Alarm
953 +
965 965  **1:** Greater than the set IDC threshold, Alarm
966 966  )))
967 967  |(% style="width:160px" %)(((
968 -**c: ** IDC alarm threshold
957 +**c**:  IDC alarm threshold
969 969  )))|(% style="width:185px" %)(((
970 970  Unit: uA
971 971  )))
972 -|(% style="width:160px" %)**d:** Set the VDC alarm trigger condition|(% style="width:185px" %)(((
961 +|(% style="width:160px" %)**d**: Set the VDC alarm trigger condition|(% style="width:185px" %)(((
973 973  **0:** Less than the set VDC threshold, Alarm
963 +
974 974  **1:** Greater than the set VDC threshold, Alarm
975 975  )))
976 976  |(% style="width:160px" %)**e:** VDC alarm threshold|(% style="width:185px" %)Unit: mV
977 977  
978 -Example:
968 +**Example:**
979 979  
980 -* AT+ROC=3,60,0,3000,0,5000  ~/~/ The data is checked every 60 seconds. If the IDC is less than 3mA or the VDC is less than 5000mV, an alarm is generated.
981 -* AT+ROC=3,180,1,3000,1,5000  ~/~/ The data is checked every 180 seconds. If the IDC is greater than 3mA or the VDC is greater than 5000mV, an alarm is generated.
982 -* AT+ROC=3,300,0,3000,1,5000  ~/~/ The data is checked every 300 seconds. If the IDC is less than 3mA or the VDC is greater than 5000mV, an alarm is generated.
970 +* AT+ROC=3,60,0,3000,0,5000  ~/~/The data is checked every 60 seconds. If the IDC is less than 3mA or the VDC is less than 5000mV, an alarm is generated.
971 +* AT+ROC=3,180,1,3000,1,5000  ~/~/The data is checked every 180 seconds. If the IDC is greater than 3mA or the VDC is greater than 5000mV, an alarm is generated.
972 +* AT+ROC=3,300,0,3000,1,5000  ~/~/The data is checked every 300 seconds. If the IDC is less than 3mA or the VDC is greater than 5000mV, an alarm is generated.
983 983  
984 -Downlink Command: 0x09 03 aa bb cc dd ee
974 +(% style="color:blue" %)**Downlink Command: 0x09 03 aa bb cc dd ee**
985 985  
986 986  Format: Function code (0x09) followed by 03 and the remaining 5 bytes.
987 987  
988 -aa: 2 bytes; Set the detection interval.(second)
978 +(% style="color:blue" %)**aa: **(% style="color:#037691" %)**2 bytes;**(%%) Set the detection interval.(second)
989 989  
990 -bb: 1 byte; Set the IDC alarm trigger condition.
980 +(% style="color:blue" %)**bb: **(% style="color:#037691" %)**1 byte; **(%%)Set the IDC alarm trigger condition.
991 991  
992 -cc: 2 bytes; IDC alarm threshold.(uA)
982 +(% style="color:blue" %)**cc: **(% style="color:#037691" %)**2 bytes;**(%%) IDC alarm threshold.(uA)
993 993  
994 994  
995 -dd: 1 byte; Set the VDC alarm trigger condition.
985 +(% style="color:blue" %)**dd: **(% style="color:#037691" %)**1 byte;**(%%) Set the VDC alarm trigger condition.
996 996  
997 -ee: 2 bytes; VDC alarm threshold.(mV)
987 +(% style="color:blue" %)**ee: **(% style="color:#037691" %)**2 bytes; **(%%)VDC alarm threshold.(mV)
998 998  
999 -Example:
989 +**Example:**
1000 1000  
1001 -* Downlink Payload: 09 03 00 3C 00 0B B8 00 13 38 ~/~/ Equal to AT+ROC=3,60,0,3000,0,5000
1002 -* Downlink Payload: 09 03 00 b4 01 0B B8 01 13 38  ~/~/ Equal to AT+ROC=3,60,1,3000,1,5000
1003 -* Downlink Payload: 09 03 01 2C 00 0B B8 01 13 38  ~/~/ Equal to AT+ROC=3,60,0,3000,1,5000
991 +* Downlink Payload: **09 03 00 3C 00 0B B8 00 13 38** ~/~/Equal to AT+ROC=3,60,0,3000,0,5000
992 +* Downlink Payload: **09 03 00 b4 01 0B B8 01 13 38**  ~/~/Equal to AT+ROC=3,60,1,3000,1,5000
993 +* Downlink Payload: **09 03 01 2C 00 0B B8 01 13 38**  ~/~/Equal to AT+ROC=3,60,0,3000,1,5000
1004 1004  
1005 -Screenshot of parsing example in TTN:
995 +(% style="color:blue" %)**Screenshot of parsing example in TTN:**
1006 1006  
1007 1007  * AT+ROC=3,60,0,3000,0,5000
1008 1008  
... ... @@ -1012,7 +1012,7 @@
1012 1012  == 2.9 ​Firmware Change Log ==
1013 1013  
1014 1014  
1015 -Firmware download link:
1005 +**Firmware download link:**
1016 1016  
1017 1017  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
1018 1018  
... ... @@ -1024,7 +1024,7 @@
1024 1024  
1025 1025  PS-LB/LS supports below configure method:
1026 1026  
1027 -* AT Command via Bluetooth Connection (Recommand Way): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
1017 +* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
1028 1028  * AT Command via UART Connection : See [[FAQ>>||anchor="H6.FAQ"]].
1029 1029  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
1030 1030  
... ... @@ -1052,10 +1052,10 @@
1052 1052  
1053 1053  Feature: Change LoRaWAN End Node Transmit Interval.
1054 1054  
1055 -AT Command: AT+TDC
1045 +(% style="color:blue" %)**AT Command: AT+TDC**
1056 1056  
1057 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1058 -|=(% style="width: 160px; background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 160px; background-color:#4F81BD;color:white" %)Function|=(% style="width: 190px;background-color:#4F81BD;color:white" %)Response
1047 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1048 +|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 190px;background-color:#4F81BD;color:white" %)**Response**
1059 1059  |(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=?|(% style="background-color:#f2f2f2; width:166px" %)Show current transmit Interval|(% style="background-color:#f2f2f2" %)(((
1060 1060  30000
1061 1061  OK
... ... @@ -1066,7 +1066,7 @@
1066 1066  Set transmit interval to 60000ms = 60 seconds
1067 1067  )))
1068 1068  
1069 -Downlink Command: 0x01
1059 +(% style="color:blue" %)**Downlink Command: 0x01**
1070 1070  
1071 1071  Format: Command Code (0x01) followed by 3 bytes time value.
1072 1072  
... ... @@ -1080,10 +1080,10 @@
1080 1080  
1081 1081  Feature, Set Interrupt mode for GPIO_EXIT.
1082 1082  
1083 -AT Command: AT+INTMOD
1073 +(% style="color:blue" %)**AT Command: AT+INTMOD**
1084 1084  
1085 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1086 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 196px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 160px;background-color:#4F81BD;color:white" %)Response
1075 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1076 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Response**
1087 1087  |(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=?|(% style="background-color:#f2f2f2; width:196px" %)Show current interrupt mode|(% style="background-color:#f2f2f2; width:157px" %)(((
1088 1088  0
1089 1089  OK
... ... @@ -1097,7 +1097,7 @@
1097 1097  3. (Trigger by rising edge)
1098 1098  )))|(% style="background-color:#f2f2f2; width:157px" %)OK
1099 1099  
1100 -Downlink Command: 0x06
1090 +(% style="color:blue" %)**Downlink Command: 0x06**
1101 1101  
1102 1102  Format: Command Code (0x06) followed by 3 bytes.
1103 1103  
... ... @@ -1111,10 +1111,10 @@
1111 1111  
1112 1112  Feature, Control the output 3V3 , 5V or 12V.
1113 1113  
1114 -AT Command: AT+3V3T
1104 +(% style="color:blue" %)**AT Command: AT+3V3T**
1115 1115  
1116 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:474px" %)
1117 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 201px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 119px;background-color:#4F81BD;color:white" %)Response
1106 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:474px" %)
1107 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 201px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 119px;background-color:#4F81BD;color:white" %)**Response**
1118 1118  |(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=?|(% style="background-color:#f2f2f2; width:201px" %)Show 3V3 open time.|(% style="background-color:#f2f2f2; width:116px" %)(((
1119 1119  0
1120 1120  OK
... ... @@ -1130,10 +1130,10 @@
1130 1130  OK
1131 1131  )))
1132 1132  
1133 -AT Command: AT+5VT
1123 +(% style="color:blue" %)**AT Command: AT+5VT**
1134 1134  
1135 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:470px" %)
1136 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 196px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 119px;background-color:#4F81BD;color:white" %)Response
1125 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:470px" %)
1126 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 119px;background-color:#4F81BD;color:white" %)**Response**
1137 1137  |(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=?|(% style="background-color:#f2f2f2; width:196px" %)Show 5V open time.|(% style="background-color:#f2f2f2; width:114px" %)(((
1138 1138  0
1139 1139  OK
... ... @@ -1149,10 +1149,10 @@
1149 1149  OK
1150 1150  )))
1151 1151  
1152 -AT Command: AT+12VT
1142 +(% style="color:blue" %)**AT Command: AT+12VT**
1153 1153  
1154 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:443px" %)
1155 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 199px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 88px;background-color:#4F81BD;color:white" %)Response
1144 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:443px" %)
1145 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 199px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 88px;background-color:#4F81BD;color:white" %)**Response**
1156 1156  |(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=?|(% style="background-color:#f2f2f2; width:199px" %)Show 12V open time.|(% style="background-color:#f2f2f2; width:83px" %)(((
1157 1157  0
1158 1158  OK
... ... @@ -1162,28 +1162,28 @@
1162 1162  OK
1163 1163  )))
1164 1164  
1165 -Downlink Command: 0x07
1155 +(% style="color:blue" %)**Downlink Command: 0x07**
1166 1166  
1167 1167  Format: Command Code (0x07) followed by 3 bytes.
1168 1168  
1169 1169  The first byte is which power, the second and third bytes are the time to turn on.
1170 1170  
1171 -* Example 1: Downlink Payload: 070101F4  ~-~-->  AT+3V3T=500
1172 -* Example 2: Downlink Payload: 0701FFFF   ~-~-->  AT+3V3T=65535
1173 -* Example 3: Downlink Payload: 070203E8  ~-~-->  AT+5VT=1000
1174 -* Example 4: Downlink Payload: 07020000  ~-~-->  AT+5VT=0
1175 -* Example 5: Downlink Payload: 070301F4  ~-~-->  AT+12VT=500
1176 -* Example 6: Downlink Payload: 07030000  ~-~-->  AT+12VT=0
1161 +* Example 1: Downlink Payload: 070101F4  **~-~-->**  AT+3V3T=500
1162 +* Example 2: Downlink Payload: 0701FFFF   **~-~-->**  AT+3V3T=65535
1163 +* Example 3: Downlink Payload: 070203E8  **~-~-->**  AT+5VT=1000
1164 +* Example 4: Downlink Payload: 07020000  **~-~-->**  AT+5VT=0
1165 +* Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
1166 +* Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
1177 1177  
1178 -Note: Before v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 65535 milliseconds. After v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 180 seconds.
1168 +(% style="color:red" %)**Note: Before v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 65535 milliseconds. After v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 180 seconds.**
1179 1179  
1180 -Therefore, the corresponding downlink command is increased by one byte to five bytes.
1170 +(% style="color:red" %)**Therefore, the corresponding downlink command is increased by one byte to five bytes.**
1181 1181  
1182 -Example:
1172 +**Example: **
1183 1183  
1184 -* 120s=120000ms(D) =0x01D4C0(H), Downlink Payload: 07 01 01 D4 C0  ~-~-->  AT+3V3T=120000
1185 -* 100s=100000ms(D) =0x0186A0(H), Downlink Payload: 07 02 01 86 A0  ~-~-->  AT+5VT=100000
1186 -* 80s=80000ms(D) =0x013880(H), Downlink Payload: 07 03 01 38 80  ~-~-->  AT+12VT=80000
1174 +* 120s=120000ms(D) =0x01D4C0(H), Downlink Payload: 07 **01** 01 D4 C0  **~-~-->**  AT+3V3T=120000
1175 +* 100s=100000ms(D) =0x0186A0(H), Downlink Payload: 07 **02** 01 86 A0  **~-~-->**  AT+5VT=100000
1176 +* 80s=80000ms(D) =0x013880(H), Downlink Payload: 07 **03** 01 38 80  **~-~-->**  AT+12VT=80000
1187 1187  
1188 1188  === 3.3.4 Set the Probe Model ===
1189 1189  
... ... @@ -1190,7 +1190,7 @@
1190 1190  
1191 1191  Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
1192 1192  
1193 -AT Command: AT +PROBE
1183 +(% style="color:blue" %)**AT Command: AT** **+PROBE**
1194 1194  
1195 1195  AT+PROBE=aabb
1196 1196  
... ... @@ -1209,7 +1209,7 @@
1209 1209  (0~~100Pa->01,0~~200Pa->02,0~~300Pa->03,0~~1KPa->04,0~~2KPa->05,0~~3KPa->06,0~~4KPa->07,0~~5KPa->08,0~~10KPa->09,-100~~ 100Pa->0A,-200~~ 200Pa->0B,-1~~ 1KPa->0C)
1210 1210  
1211 1211  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1212 -|(% style="background-color:#4f81bd; color:white; width:154px" %)Command Example|(% style="background-color:#4f81bd; color:white; width:269px" %)Function|(% style="background-color:#4f81bd; color:white" %)Response
1202 +|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Function**|(% style="background-color:#4f81bd; color:white" %)**Response**
1213 1213  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=?|(% style="background-color:#f2f2f2; width:269px" %)Get or Set the probe model.|(% style="background-color:#f2f2f2" %)0
1214 1214  OK
1215 1215  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0003|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 3m type.|(% style="background-color:#f2f2f2" %)OK
... ... @@ -1220,12 +1220,12 @@
1220 1220  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0101|(% style="background-color:#f2f2f2; width:269px" %)Set pressure transmitters mode, first type(A).|(% style="background-color:#f2f2f2" %)OK
1221 1221  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0000|(% style="background-color:#f2f2f2; width:269px" %)Initial state, no settings.|(% style="background-color:#f2f2f2" %)OK
1222 1222  
1223 -Downlink Command: 0x08
1213 +(% style="color:blue" %)**Downlink Command: 0x08**
1224 1224  
1225 1225  Format: Command Code (0x08) followed by 2 bytes.
1226 1226  
1227 -* Example 1: Downlink Payload: 080003  ~-~-->  AT+PROBE=0003
1228 -* Example 2: Downlink Payload: 080101  ~-~-->  AT+PROBE=0101
1217 +* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
1218 +* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
1229 1229  
1230 1230  === 3.3.5 Multiple collections are one uplink (Since firmware V1.1) ===
1231 1231  
... ... @@ -1232,155 +1232,48 @@
1232 1232  
1233 1233  Added AT+STDC command to collect the voltage of VDC_INPUT/IDC_INPUT multiple times and upload it at one time.
1234 1234  
1235 -AT Command: AT +STDC
1225 +(% style="color:blue" %)**AT Command: AT** **+STDC**
1236 1236  
1237 -AT+STDC=aa,bb,cc
1227 +AT+STDC=aa,bb,bb
1238 1238  
1239 -aa:
1240 -0: means disable this function and use TDC to send packets.
1241 -1: means that the function is enabled to send packets by collecting VDC data for multiple times.
1242 -2: means that the function is enabled to send packets by collecting IDC data for multiple times.
1243 -bb: Each collection interval (s), the value is 1~~65535
1244 -cc: the number of collection times, the value is 1~~120
1229 +(% style="color:#037691" %)**aa:**(%%)
1230 +**0:** means disable this function and use TDC to send packets.
1231 +**1:** means that the function is enabled to send packets by collecting VDC data for multiple times.
1232 +**2:** means that the function is enabled to send packets by collecting IDC data for multiple times.
1233 +(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
1234 +(% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
1245 1245  
1246 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1247 -|(% style="background-color:#4f81bd; color:white; width:160px" %)Command Example|(% style="background-color:#4f81bd; color:white; width:215px" %)Function|(% style="background-color:#4f81bd; color:white" %)Response
1236 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1237 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white" %)**Response**
1248 1248  |(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=?|(% style="background-color:#f2f2f2; width:215px" %)Get the mode of multiple acquisitions and one uplink.|(% style="background-color:#f2f2f2" %)1,10,18
1249 1249  OK
1250 1250  |(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=1,10,18|(% style="background-color:#f2f2f2; width:215px" %)Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(% style="background-color:#f2f2f2" %)(((
1251 1251  Attention:Take effect after ATZ
1242 +
1252 1252  OK
1253 1253  )))
1254 1254  |(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=0, 0,0|(% style="background-color:#f2f2f2; width:215px" %)(((
1255 -
1256 -
1257 1257  Use the TDC interval to send packets.(default)
1258 1258  
1259 1259  
1260 1260  )))|(% style="background-color:#f2f2f2" %)(((
1261 1261  Attention:Take effect after ATZ
1251 +
1262 1262  OK
1263 1263  )))
1264 1264  
1265 -Downlink Command: 0xAE
1255 +(% style="color:blue" %)**Downlink Command: 0xAE**
1266 1266  
1267 1267  Format: Command Code (0xAE) followed by 4 bytes.
1268 1268  
1269 -* Example 1: Downlink Payload: AE 01 02 58 12 ~-~-->  AT+STDC=1,600,18
1259 +* Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
1270 1270  
1271 -== 3.4 Print data entries base on page(Since v1.1.0) ==
1272 -
1273 -
1274 -Feature: Print the sector data from start page to stop page (max is 416 pages).
1275 -
1276 -(% style="color:#4f81bd" %)**AT Command: AT+PDTA**
1277 -
1278 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1279 -|(% style="background-color:#4f81bd; color:white; width:158px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:352px" %)**Function**
1280 -|(% style="width:156px" %)(((
1281 - AT+PDTA=1,1
1282 -Print page 1 to 1
1283 -)))|(% style="width:311px" %)(((
1284 -Stop Tx events when read sensor data
1285 -
1286 -8031000 1970/1/1 00:00:00 0 in1:low in2:low exti:low status:false vdc:0.000 idc:0.000 proble:0000 water_deep:0.000
1287 -
1288 -8031010 1970/1/1 00:00:00 0 in1:low in2:low exti:low status:false vdc:0.000 idc:0.000 proble:0000 water_deep:0.000
1289 -
1290 -8031020 1970/1/1 00:00:00 0 in1:low in2:low exti:low status:false vdc:0.000 idc:0.000 proble:0000 water_deep:0.000
1291 -
1292 -8031030 1970/1/1 00:00:00 0 in1:low in2:low exti:low status:false vdc:0.000 idc:0.000 proble:0000 water_deep:0.000
1293 -
1294 -8031040 1970/1/1 00:00:00 0 in1:low in2:low exti:low status:false vdc:0.000 idc:0.000 proble:0000 water_deep:0.000
1295 -
1296 -8031050 1970/1/1 00:00:00 0 in1:low in2:low exti:low status:false vdc:0.000 idc:0.000 proble:0000 water_deep:0.000
1297 -
1298 -8031060 1970/1/1 00:00:00 0 in1:low in2:low exti:low status:false vdc:0.000 idc:0.000 proble:0000 water_deep:0.000
1299 -
1300 -8031070 1970/1/1 00:00:00 0 in1:low in2:low exti:low status:false vdc:0.000 idc:0.000 proble:0000 water_deep:0.000
1301 -
1302 -Start Tx events
1303 -
1304 -
1305 -OK
1306 -)))
1307 -
1308 -(% style="color:#4f81bd" %)**Downlink Command:**
1309 -
1310 -No downlink commands for feature
1311 -
1312 -
1313 -== 3.5 Print last few data entries(Since v1.1.0) ==
1314 -
1315 -
1316 -Feature: Print the last few data entries
1317 -
1318 -
1319 -(% style="color:#4f81bd" %)**AT Command: AT+PLDTA**
1320 -
1321 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1322 -|(% style="background-color:#4f81bd; color:white; width:158px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:352px" %)**Function**
1323 -|(% style="width:156px" %)(((
1324 -AT+PLDTA=10
1325 -Print last 10 entries
1326 -)))|(% style="width:311px" %)(((
1327 -Stop Tx events when read sensor data
1328 -
1329 -0001 2025/5/19 06:16:50 3246 in1:low in2:low exti:low status:false vdc:3.352 idc:0.000 proble:0000 water_deep:0.000
1330 -
1331 -0002 2025/5/19 06:17:50 3246 in1:low in2:low exti:low status:false vdc:3.352 idc:0.000 proble:0000 water_deep:0.000
1332 -
1333 -0003 2025/5/19 06:18:50 3246 in1:low in2:low exti:low status:false vdc:3.352 idc:0.000 proble:0000 water_deep:0.000
1334 -
1335 -0004 2025/5/19 06:19:50 3246 in1:low in2:low exti:low status:false vdc:3.352 idc:0.000 proble:0000 water_deep:0.000
1336 -
1337 -0005 2025/5/19 06:20:50 3246 in1:low in2:low exti:low status:false vdc:3.352 idc:0.000 proble:0000 water_deep:0.000
1338 -
1339 -0006 2025/5/19 06:21:50 3246 in1:low in2:low exti:low status:false vdc:3.351 idc:0.000 proble:0000 water_deep:0.000
1340 -
1341 -0007 2025/5/19 06:22:50 3240 in1:low in2:low exti:low status:false vdc:3.351 idc:0.000 proble:0000 water_deep:0.000
1342 -
1343 -0008 2025/5/19 06:26:44 3276 in1:low in2:low exti:low status:false vdc:3.385 idc:0.000 proble:0000 water_deep:0.000
1344 -
1345 -0009 2025/5/19 06:27:36 3246 in1:low in2:low exti:low status:false vdc:3.351 idc:0.000 proble:0000 water_deep:0.000
1346 -
1347 -0010 2025/5/19 06:28:36 3240 in1:low in2:low exti:low status:false vdc:3.351 idc:0.000 proble:0000 water_deep:0.000
1348 -
1349 -Start Tx events
1350 -
1351 -OK
1352 -)))
1353 -
1354 -(% style="color:#4f81bd" %)**Downlink Command:**
1355 -
1356 -No downlink commands for feature
1357 -
1358 -
1359 -== 3.6 Clear Flash Record(Since v1.1.0) ==
1360 -
1361 -
1362 -Feature: Clear flash storage for data log feature.
1363 -
1364 -(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1365 -
1366 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:503px" %)
1367 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:137px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
1368 -|(% style="width:155px" %)AT+CLRDTA |(% style="width:134px" %)Clear date record|(% style="width:209px" %)(((
1369 -Clear all stored sensor data…
1370 -
1371 -OK
1372 -)))
1373 -
1374 -(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
1375 -
1376 -* Example: 0xA301  ~/~/  Same as AT+CLRDTA
1377 -
1378 1378  = 4. Battery & Power Consumption =
1379 1379  
1380 1380  
1381 1381  PS-LB use ER26500 + SPC1520 battery pack and PS-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1382 1382  
1383 -[[Battery Info & Power Consumption Analyze>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1266 +[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1384 1384  
1385 1385  
1386 1386  = 5. OTA firmware update =
... ... @@ -1416,22 +1416,22 @@
1416 1416  Test the current values at the depth of different liquids and convert them to a linear scale.
1417 1417  Replace its ratio with the ratio of water to current in the decoder.
1418 1418  
1419 -Example:
1302 +**Example:**
1420 1420  
1421 1421  Measure the corresponding current of the sensor when the liquid depth is 2.04m and 0.51m.
1422 1422  
1423 -Calculate scale factor:
1306 +**Calculate scale factor：**
1424 1424  Use these two data to calculate the current and depth scaling factors：(7.888-5.035)/(2.04-0.51)=1.86470588235294
1425 1425  
1426 -Calculation formula:
1309 +**Calculation formula：**
1427 1427  
1428 1428  Use the calibration formula：(Current current - Minimum calibration current)/Scale factor + Minimum actual calibration height
1429 1429  
1430 -Actual calculations:
1313 +**Actual calculations：**
1431 1431  
1432 1432  Use this formula to calculate the value corresponding to the current at a depth of 1.5 meters: (6.918-5.035)/1.86470588235294+0.51=1.519810726
1433 1433  
1434 -Error:
1317 +**Error：**
1435 1435  
1436 1436  0.009810726
1437 1437  
... ... @@ -1438,31 +1438,6 @@
1438 1438  
1439 1439  [[image:image-20240329175044-1.png]]
1440 1440  
1441 -
1442 -== 6.5 Cable & Probe Material Compatibility(Immersion type) ==
1443 -
1444 -
1445 -Since the installation method of immersion sensors requires immersion in a liquid environment, the discussion of liquids that can be safely installed is very important.
1446 -
1447 -(% style="color:blue" %)**The material of the immersed part of the immersion sensor:**
1448 -
1449 -* **Cable Jacket**: Black polyurethane (PU) – Resistant to water, oils, and mild chemicals.
1450 -* **Probe Material**: 316 stainless steel – Corrosion-resistant in most industrial/marine environments.
1451 -
1452 -(% style="color:blue" %)**Chemical Compatibility:**
1453 -
1454 -* **Polyurethane (PU) Cable:** Resists water, oils, fuels, and mild chemicals but may degrade with prolonged exposure to strong acids, bases, or solvents (e.g., acetone, chlorinated hydrocarbons).
1455 -* 3**16 Stainless Steel Probe:** Suitable for water, seawater, mild acids/alkalis, and industrial fluids. Avoid highly concentrated acids (e.g., hydrochloric acid) or chlorides at high temperatures.
1456 -
1457 -**Chemical Resistance Chart for Polyurethane (PU) Cable**
1458 -
1459 -[[image:image-20250603171424-1.png||height="429" width="625"]]
1460 -
1461 -**Chemical Resistance Chart for 316 Stainless Steel Probe**
1462 -
1463 -[[image:image-20250603171503-2.png||height="350" width="616"]]
1464 -
1465 -
1466 1466  = 7. Troubleshooting =
1467 1467  
1468 1468  == 7.1 Water Depth Always shows 0 in payload ==
... ... @@ -1479,42 +1479,19 @@
1479 1479  
1480 1480  = 8. Order Info =
1481 1481  
1482 -== 8.1 Thread Installation Type & Immersion Type Pressure Sensor ==
1483 1483  
1341 +(% style="display:none" %)
1484 1484  
1485 -Part Number: (% style="color:blue" %)**PS-NB/NS-Txx-YY  or  PS-NB/NS-Ixx-YY**
1486 -
1487 -(% style="color:blue" %)**XX:**(%%)** Pressure Range and Thread Type **
1488 -
1489 -(% style="color:blue" %)**YY:**(%%)** The default frequency band**
1490 -
1491 -* YY: Frequency Bands, options: EU433,CN470,EU868,IN865,KR920,AS923,AU915,US915
1492 -
1493 1493  [[image:image-20241021093209-1.png]]
1494 1494  
1495 -
1496 -== 8.2 Wireless Differential Air Pressure Sensor ==
1497 -
1498 -
1499 -Part Number: (% style="color:blue" %)**PS-LB-Dxx-YY  or  PS-LS-Dxx-YY **
1500 -
1501 -(% style="color:blue" %)**XX:**(%%)** Differential Pressure Range**
1502 -
1503 -(% style="color:blue" %)**YY:**(%%)** The default frequency band**
1504 -
1505 -* YY: Frequency Bands, options: EU433,CN470,EU868,IN865,KR920,AS923,AU915,US915
1506 -
1507 -[[image:image-20250401174215-1.png||height="486" width="656"]]
1508 -
1509 -
1510 1510  = 9. ​Packing Info =
1511 1511  
1512 1512  
1513 -Package Includes:
1348 +(% style="color:#037691" %)**Package Includes**:
1514 1514  
1515 -* PS-LB/LS-Txx/Ixx, PS-LB/LS-Dxx   LoRaWAN Pressure Sensor
1350 +* PS-LB or PS-LS LoRaWAN Pressure Sensor
1516 1516  
1517 -Dimension and weight:
1352 +(% style="color:#037691" %)**Dimension and weight**:
1518 1518  
1519 1519  * Device Size: cm
1520 1520  * Device Weight: g
image-20250401163826-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -18.9 KB
Content
image-20250401163906-4.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -181.6 KB
Content
image-20250401174215-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.3 KB
Content
image-20250419092225-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.6 KB
Content
image-20250419162538-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.3 KB
Content
image-20250512144042-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -471.4 KB
Content
image-20250512144122-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -572.9 KB
Content
image-20250603171424-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -38.7 KB
Content
image-20250603171503-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -33.7 KB
Content