Skip to Content
Last modified by Xiaoling on 2025/07/10 16:21
From version 131.1
edited by Xiaoling
on 2025/04/27 10:31
Change comment: There is no comment for this version
To version 120.1
edited by Xiaoling
on 2025/04/01 16:35
Change comment: Uploaded new attachment "image-20250401163530-1.jpeg", version {1}

Summary

Details

Page properties
Content
... ... @@ -2,7 +2,7 @@
2 2  
3 3  
4 4  (% style="text-align:center" %)
5 -[[image:image-20240109154731-4.png||height="546" width="769"]]
5 +[[image:image-20240109154731-4.png||height="671" width="945"]]
6 6  
7 7  
8 8  
... ... @@ -48,7 +48,9 @@
48 48  Each PS-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
49 49  )))
50 50  
51 +[[image:1675071321348-194.png]]
51 51  
53 +
52 52  == 1.2 ​Features ==
53 53  
54 54  
... ... @@ -134,7 +134,7 @@
134 134  === 1.4.2 Immersion Type ===
135 135  
136 136  
137 -[[image:image-20240109160445-5.png||height="199" width="150"]]
139 +[[image:image-20240109160445-5.png||height="221" width="166"]]
138 138  
139 139  * Immersion Type, Probe IP Level: IP68
140 140  * Measuring Range: Measure range can be customized, up to 100m.
... ... @@ -146,7 +146,7 @@
146 146  
147 147  === 1.4.3 Wireless Differential Air Pressure Sensor ===
148 148  
149 -[[image:image-20240511174954-1.png||height="193" width="193"]]
151 +[[image:image-20240511174954-1.png]]
150 150  
151 151  * Measuring Range: -100KPa~~0~~100KPa(Optional measuring range).
152 152  * Accuracy: 0.5% F.S, resolution is 0.05%.
... ... @@ -222,40 +222,36 @@
222 222  
223 223  Size of wind pressure transmitter:
224 224  
225 -[[image:image-20240513094047-2.png||height="462" width="518"]]
227 +[[image:image-20240513094047-2.png]]
226 226  
227 -(% style="color:red" %)**Note: The above dimensions are measured by hand, and the numerical error of the shell is within ±0.2mm.**
229 +Note: The above dimensions are measured by hand, and the numerical error of the shell is within ±0.2mm.
228 228  
229 229  
230 230  == 1.6 Sleep mode and working mode ==
231 231  
232 232  
233 -**Deep Sleep Mode:** Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
235 +(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
234 234  
235 -**Working Mode: **In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
237 +(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
236 236  
237 237  
238 238  == 1.7 Button & LEDs ==
239 239  
240 240  
241 -[[image:image-20250419092225-1.jpeg]]
243 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]](% style="display:none" %)
242 242  
243 243  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
244 -|=(% style="width: 167px;background-color:#4F81BD;color:white" %)Behavior on ACT|=(% style="width: 117px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 226px;background-color:#4F81BD;color:white" %)Action
246 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
245 245  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
246 -
247 -
248 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, blue led will blink once.
248 +If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
249 249  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
250 250  )))
251 251  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
252 -
253 -
254 -Green led will fast blink 5 times, device will enter OTA mode for 3 seconds. And then start to JOIN LoRaWAN network.
255 -Green led will solidly turn on for 5 seconds after joined in network.
252 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
253 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
256 256  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
257 257  )))
258 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)Red led will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
256 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
259 259  
260 260  == 1.8 Pin Mapping ==
261 261  
... ... @@ -283,13 +283,13 @@
283 283  === 1.10.1 for LB version ===
284 284  
285 285  
286 -[[image:image-20250401163530-1.jpeg]]
284 +[[image:image-20240109160800-6.png]]
287 287  
288 288  
289 289  === 1.10.2 for LS version ===
290 290  
291 291  
292 -[[image:image-20250401163539-2.jpeg]]
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1||alt="image-20231231203439-3.png"]]
293 293  
294 294  
295 295  = 2. Configure PS-LB/LS to connect to LoRaWAN network =
... ... @@ -297,7 +297,7 @@
297 297  == 2.1 How it works ==
298 298  
299 299  
300 -The PS-LB/LS is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
298 +The PS-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
301 301  
302 302  
303 303  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -305,13 +305,13 @@
305 305  
306 306  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
307 307  
308 -[[image:image-20250419162538-1.png]]
306 +[[image:1675144005218-297.png]]
309 309  
310 310  
311 311  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
312 312  
313 313  
314 -(% style="color:blue" %)**Step 1: Create a device in TTN with the OTAA keys from PS-LB/LS.**
312 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from PS-LB/LS.
315 315  
316 316  Each PS-LB/LS is shipped with a sticker with the default device EUI as below:
317 317  
... ... @@ -320,48 +320,33 @@
320 320  
321 321  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
322 322  
323 -**Create the application.**
324 324  
325 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SAC01L_LoRaWAN_Temperature%26Humidity_Sensor_User_Manual/WebHome/image-20250423093843-1.png?width=756&height=264&rev=1.1||alt="image-20250423093843-1.png"]]
322 +(% style="color:blue" %)**Register the device**
326 326  
327 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111305-2.png?width=1000&height=572&rev=1.1||alt="image-20240907111305-2.png"]]
324 +[[image:1675144099263-405.png]]
328 328  
329 329  
330 -**Add devices to the created Application.**
327 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
331 331  
332 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111659-3.png?width=977&height=185&rev=1.1||alt="image-20240907111659-3.png"]]
329 +[[image:1675144117571-832.png]]
333 333  
334 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111820-5.png?width=975&height=377&rev=1.1||alt="image-20240907111820-5.png"]]
335 335  
332 +(% style="color:blue" %)**Add APP EUI in the application**
336 336  
337 -**Enter end device specifics manually.**
338 338  
339 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907112136-6.png?width=697&height=687&rev=1.1||alt="image-20240907112136-6.png"]]
335 +[[image:1675144143021-195.png]]
340 340  
341 341  
342 -**Add DevEUI and AppKey. Customize a platform ID for the device.**
338 +(% style="color:blue" %)**Add APP KEY**
343 343  
344 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907112427-7.png?rev=1.1||alt="image-20240907112427-7.png"]]
340 +[[image:1675144157838-392.png]]
345 345  
342 +(% style="color:blue" %)**Step 2:**(%%) Activate on PS-LB/LS
346 346  
347 -(% style="color:blue" %)**Step 2: Add decoder.**
348 348  
349 -In TTN, user can add a custom payload so it shows friendly reading.
350 -
351 -Click this link to get the decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/]]
352 -
353 -Below is TTN screen shot:
354 -
355 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS25-LBLDS25-LS--LoRaWAN_LiDAR_Distance_Auto-Clean_Sensor_User_Manual/WebHome/image-20241009140556-1.png?width=1184&height=488&rev=1.1||alt="image-20241009140556-1.png" height="488" width="1184"]]
356 -
357 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS25-LBLDS25-LS--LoRaWAN_LiDAR_Distance_Auto-Clean_Sensor_User_Manual/WebHome/image-20241009140603-2.png?width=1168&height=562&rev=1.1||alt="image-20241009140603-2.png" height="562" width="1168"]]
358 -
359 -
360 -(% style="color:blue" %)**Step 3: Activate on PS-LB/LS**
361 -
362 362  Press the button for 5 seconds to activate the PS-LB/LS.
363 363  
364 -Green led will fast blink 5 times, device will enter OTA mode for 3 seconds. And then start to JOIN LoRaWAN network. Green led will solidly turn on for 5 seconds after joined in network.
347 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
365 365  
366 366  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
367 367  
... ... @@ -377,8 +377,8 @@
377 377  
378 378  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
379 379  |(% colspan="6" style="background-color:#4f81bd; color:white" %)**Device Status (FPORT=5)**
380 -|(% style="background-color:#f2f2f2; width:103px" %)Size (bytes)|(% style="background-color:#f2f2f2; width:72px" %)1|(% style="background-color:#f2f2f2" %)2|(% style="background-color:#f2f2f2; width:91px" %)1|(% style="background-color:#f2f2f2; width:86px" %)1|(% style="background-color:#f2f2f2; width:44px" %)2
381 -|(% style="background-color:#f2f2f2; width:103px" %)Value|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
363 +|(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
364 +|(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
382 382  
383 383  Example parse in TTNv3
384 384  
... ... @@ -385,11 +385,11 @@
385 385  [[image:1675144504430-490.png]]
386 386  
387 387  
388 -Sensor Model: For PS-LB/LS, this value is 0x16
371 +(% style="color:#037691" %)**Sensor Model**(%%): For PS-LB/LS, this value is 0x16
389 389  
390 -Firmware Version: 0x0100, Means: v1.0.0 version
373 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
391 391  
392 -Frequency Band:
375 +(% style="color:#037691" %)**Frequency Band**:
393 393  
394 394  *0x01: EU868
395 395  
... ... @@ -420,7 +420,7 @@
420 420  *0x0e: MA869
421 421  
422 422  
423 -Sub-Band:
406 +(% style="color:#037691" %)**Sub-Band**:
424 424  
425 425  AU915 and US915:value 0x00 ~~ 0x08
426 426  
... ... @@ -429,7 +429,7 @@
429 429  Other Bands: Always 0x00
430 430  
431 431  
432 -Battery Info:
415 +(% style="color:#037691" %)**Battery Info**:
433 433  
434 434  Check the battery voltage.
435 435  
... ... @@ -444,10 +444,10 @@
444 444  Uplink payload includes in total 9 bytes.
445 445  
446 446  
447 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
430 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
448 448  |(% style="background-color:#4f81bd; color:white; width:97px" %)(((
449 449  **Size(bytes)**
450 -)))|(% style="background-color:#4f81bd; color:white; width:50px" %)**2**|(% style="background-color:#4f81bd; color:white; width:71px" %)**2**|(% style="background-color:#4f81bd; color:white; width:98px" %)**2**|(% style="background-color:#4f81bd; color:white; width:73px" %)**2**|(% style="background-color:#4f81bd; color:white; width:122px" %)**1**
433 +)))|(% style="background-color:#4f81bd; color:white; width:48px" %)**2**|(% style="background-color:#4f81bd; color:white; width:71px" %)**2**|(% style="background-color:#4f81bd; color:white; width:98px" %)**2**|(% style="background-color:#4f81bd; color:white; width:73px" %)**2**|(% style="background-color:#4f81bd; color:white; width:122px" %)**1**
451 451  |(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
452 452  
453 453  [[image:1675144608950-310.png]]
... ... @@ -469,7 +469,7 @@
469 469  PS-LB/LS has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe. 
470 470  
471 471  
472 -For example.
455 +**For example.**
473 473  
474 474  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
475 475  |(% style="background-color:#4f81bd; color:white" %)**Part Number**|(% style="background-color:#4f81bd; color:white" %)**Probe Used**|(% style="background-color:#4f81bd; color:white" %)**4~~20mA scale**|(% style="background-color:#4f81bd; color:white" %)**Example: 12mA meaning**
... ... @@ -483,9 +483,9 @@
483 483  === 2.3.5 0~~20mA value (IDC_IN) ===
484 484  
485 485  
486 -The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
469 +The output value from **Pressure Probe**, use together with Probe Model to get the pressure value or water level.
487 487  
488 -Example:
471 +(% style="color:#037691" %)**Example**:
489 489  
490 490  27AE(H) = 10158 (D)/1000 = 10.158mA.
491 491  
... ... @@ -500,7 +500,7 @@
500 500  
501 501  Measure the voltage value. The range is 0 to 30V.
502 502  
503 -Example:
486 +(% style="color:#037691" %)**Example**:
504 504  
505 505  138E(H) = 5006(D)/1000= 5.006V
506 506  
... ... @@ -510,7 +510,7 @@
510 510  
511 511  IN1 and IN2 are used as digital input pins.
512 512  
513 -Example:
496 +(% style="color:#037691" %)**Example**:
514 514  
515 515  09 (H): (0x09&0x08)>>3=1    IN1 pin is high level.
516 516  
... ... @@ -517,9 +517,9 @@
517 517  09 (H): (0x09&0x04)>>2=0    IN2 pin is low level.
518 518  
519 519  
520 -This data field shows if this packet is generated by Interrupt Pin or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
503 +This data field shows if this packet is generated by (% style="color:blue" %)**Interrupt Pin** (%%)or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
521 521  
522 -Example:
505 +(% style="color:#037691" %)**Example:**
523 523  
524 524  09 (H): (0x09&0x02)>>1=1    The level of the interrupt pin.
525 525  
... ... @@ -536,8 +536,6 @@
536 536  **Size(bytes)**
537 537  )))|(% style="background-color:#4f81bd; color:white; width:35px" %)**2**|(% style="background-color:#4f81bd; color:white; width:400px" %)**n**
538 538  |(% style="width:94px" %)Value|(% style="width:43px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:367px" %)(((
539 -
540 -
541 541  Voltage value, each 2 bytes is a set of voltage values.
542 542  )))
543 543  
... ... @@ -570,9 +570,9 @@
570 570  
571 571  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
572 572  
573 -Step 1: Be sure that your device is programmed and properly connected to the network at this time.
554 +(% style="color:blue" %)**Step 1: **(%%)Be sure that your device is programmed and properly connected to the network at this time.
574 574  
575 -Step 2: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
556 +(% style="color:blue" %)**Step 2:**(%%) To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
576 576  
577 577  [[image:1675144951092-237.png]]
578 578  
... ... @@ -580,9 +580,9 @@
580 580  [[image:1675144960452-126.png]]
581 581  
582 582  
583 -Step 3: Create an account or log in Datacake.
564 +(% style="color:blue" %)**Step 3:**(%%) Create an account or log in Datacake.
584 584  
585 -Step 4: Create PS-LB/LS product.
566 +(% style="color:blue" %)**Step 4:** (%%)Create PS-LB/LS product.
586 586  
587 587  [[image:1675145004465-869.png]]
588 588  
... ... @@ -593,7 +593,7 @@
593 593  [[image:1675145029119-717.png]]
594 594  
595 595  
596 -Step 5: add payload decode
577 +(% style="color:blue" %)**Step 5: **(%%)add payload decode
597 597  
598 598  [[image:1675145051360-659.png]]
599 599  
... ... @@ -617,13 +617,13 @@
617 617  
618 618  PS-LB uses Unix TimeStamp format based on
619 619  
620 -[[image:image-20250401163826-3.jpeg]]
601 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861618065-927.png?width=705&height=109&rev=1.1||alt="1652861618065-927.png" height="109" width="705"]]
621 621  
622 622  Users can get this time from the link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
623 623  
624 624  Below is the converter example:
625 625  
626 -[[image:image-20250401163906-4.jpeg]]
607 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861637105-371.png?width=732&height=428&rev=1.1||alt="1652861637105-371.png"]]
627 627  
628 628  
629 629  === 2.6.2 Set Device Time ===
... ... @@ -632,16 +632,16 @@
632 632  There are two ways to set the device's time:
633 633  
634 634  
635 -~1. Through LoRaWAN MAC Command (Default settings)
616 +(% style="color:blue" %)**1. Through LoRaWAN MAC Command (Default settings)**
636 636  
637 637  Users need to set SYNCMOD=1 to enable sync time via the MAC command.
638 638  
639 639  Once CPL01 Joined the LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL01. If CPL01 fails to get the time from the server, CPL01 will use the internal time and wait for the next time request ~[[[via Device Status (FPORT=5)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.1DeviceStatus2CFPORT3D5]]].
640 640  
641 -Note: LoRaWAN Server needs to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature.
622 +(% style="color:red" %)**Note: LoRaWAN Server needs to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature.**
642 642  
643 643  
644 - 2. Manually Set Time
625 +(% style="color:blue" %)** 2. Manually Set Time**
645 645  
646 646  Users need to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
647 647  
... ... @@ -651,8 +651,8 @@
651 651  Users can poll sensor values based on timestamps. Below is the downlink command.
652 652  
653 653  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:470px" %)
654 -|=(% colspan="4" style="width: 160px; background-color:#4F81BD;color:white" %)Downlink Command to poll Open/Close status (0x31)
655 -|(% style="background-color:#f2f2f2; width:67px" %)1byte|(% style="background-color:#f2f2f2; width:145px" %)4bytes|(% style="background-color:#f2f2f2; width:133px" %)4bytes|(% style="background-color:#f2f2f2; width:163px" %)1byte
635 +|=(% colspan="4" style="width: 160px; background-color:#4F81BD;color:white" %)**Downlink Command to poll Open/Close status (0x31)**
636 +|(% style="background-color:#f2f2f2; width:67px" %)**1byte**|(% style="background-color:#f2f2f2; width:145px" %)**4bytes**|(% style="background-color:#f2f2f2; width:133px" %)**4bytes**|(% style="background-color:#f2f2f2; width:163px" %)**1byte**
656 656  |(% style="background-color:#f2f2f2; width:67px" %)31|(% style="background-color:#f2f2f2; width:145px" %)Timestamp start|(% style="background-color:#f2f2f2; width:133px" %)(((
657 657  Timestamp end
658 658  )))|(% style="background-color:#f2f2f2; width:163px" %)Uplink Interval
... ... @@ -671,30 +671,36 @@
671 671  
672 672  The Datalog uplinks will use below payload format.
673 673  
674 -Retrieval data payload:
655 +**Retrieval data payload:**
675 675  
676 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
657 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
677 677  |=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
678 -Size(bytes)
679 -)))|=(% style="width: 70px; background-color:#4F81BD;color:white" %)2|=(% style="width: 70px; background-color:#4F81BD;color:white" %)2|=(% style="width: 80px; background-color: rgb(79, 129, 189); color: white;" %)2|=(% style="width: 150px; background-color: rgb(79, 129, 189); color: white;" %)1|=(% style="width: 80px; background-color: rgb(79, 129, 189); color: white;" %)4
659 +**Size(bytes)**
660 +)))|=(% style="width: 40px; background-color:#4F81BD;color:white" %)**2**|=(% style="width: 55px; background-color:#4F81BD;color:white" %)**2**|=(% style="width: 83px; background-color: rgb(79, 129, 189); color: white;" %)**2**|=(% style="width: 201px; background-color: rgb(79, 129, 189); color: white;" %)**1**|=(% style="width: 86px; background-color: rgb(79, 129, 189); color: white;" %)**4**
680 680  |(% style="width:103px" %)Value|(% style="width:68px" %)(((
681 -Probe_mod
662 +Probe
663 +
664 +_mod
682 682  )))|(% style="width:104px" %)(((
683 -VDC_intput_V
666 +VDC
667 +
668 +_intput_V
684 684  )))|(% style="width:83px" %)(((
685 -IDC_intput_mA
670 +IDC
671 +
672 +_intput_mA
686 686  )))|(% style="width:201px" %)(((
687 687  IN1_pin_level& IN2_pin_level& Exti_pin_level&Exti_status
688 688  )))|(% style="width:86px" %)Unix Time Stamp
689 689  
690 -IN1_pin_level & IN2_pin_level & Exti_pin_level & Exti_status:
677 +**IN1_pin_level & IN2_pin_level & Exti_pin_level & Exti_status:**
691 691  
692 692  [[image:image-20250117104847-4.png]]
693 693  
694 694  
695 -No ACK Message:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for PNACKMD=1 feature)
682 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
696 696  
697 -Poll Message Flag: 1: This message is a poll message reply.
684 +**Poll Message Flag**: 1: This message is a poll message reply.
698 698  
699 699  * Poll Message Flag is set to 1.
700 700  
... ... @@ -702,17 +702,17 @@
702 702  
703 703  For example, in US915 band, the max payload for different DR is:
704 704  
705 -a) DR0: max is 11 bytes so one entry of data
692 +**a) DR0:** max is 11 bytes so one entry of data
706 706  
707 -b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
694 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
708 708  
709 -c) DR2: total payload includes 11 entries of data
696 +**c) DR2:** total payload includes 11 entries of data
710 710  
711 -d) DR3: total payload includes 22 entries of data.
698 +**d) DR3: **total payload includes 22 entries of data.
712 712  
713 713  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
714 714  
715 -Example:
702 +**Example:**
716 716  
717 717  If PS-LB-NA has below data inside Flash:
718 718  
... ... @@ -726,46 +726,53 @@
726 726   Stop time: 6788DB63 = time 25/1/16 10:11:47
727 727  
728 728  
729 -PA-LB-NA will uplink this payload.
716 +**PA-LB-NA will uplink this payload.**
730 730  
731 731  [[image:image-20250117104827-2.png]]
732 732  
733 -
720 +(((
734 734  00001B620000406788D9BF  00000D130000406788D9FB  00000D120000406788DA37  00000D110000406788DA73  00000D100000406788DAAF  00000D100000406788DAEB  00000D0F0000406788DB27  00000D100000406788DB63
722 +)))
735 735  
736 -
724 +(((
737 737  Where the first 11 bytes is for the first entry :
726 +)))
738 738  
739 -
728 +(((
740 740  0000  0D10  0000  40  6788DB63
730 +)))
741 741  
732 +(((
733 +**Probe_mod **= 0x0000 = 0000
734 +)))
742 742  
743 -Probe_mod = 0x0000 = 0000
736 +(((
737 +**VDC_intput_V **= 0x0D10/1000=3.344V
744 744  
739 +**IDC_intput_mA **= 0x0000/1000=0mA
740 +)))
745 745  
746 -VDC_intput_V = 0x0D10/1000=3.344V
742 +(((
743 +**IN1_pin_level **= (0x40& 0x08)? "High":"Low" = 0(Low)
747 747  
748 -IDC_intput_mA = 0x0000/1000=0mA
745 +**IN2_pin_level = (**0x40& 0x04)? "High":"Low" = 0(Low)
749 749  
747 +**Exti_pin_level = (**0x40& 0x02)? "High":"Low" = 0(Low)
750 750  
751 -IN1_pin_level = (0x40& 0x08)? "High":"Low" = 0(Low)
749 +**Exti_status = (**0x40& 0x01)? "True":"False" = 0(False)
750 +)))
752 752  
753 -IN2_pin_level = (0x40& 0x04)? "High":"Low" = 0(Low)
752 +(((
753 +**Unix time** is 0x6788DB63 = 1737022307s = 2025/1/16 10:11:47
754 +)))
754 754  
755 -Exti_pin_level = (0x40& 0x02)? "High":"Low" = 0(Low)
756 +**Its data format is:**
756 756  
757 -Exti_status = (0x40& 0x01)? "True":"False" = 0(False)
758 +[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level**, **IN2_pin_level, Exti_pin_level, water_deep, Data_time],[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level**, **IN2_pin_level, Exti_pin_level, water_deep, Data_time],...
758 758  
760 +(% style="color:red" %)**Note: water_deep in the data needs to be converted using decoding to get it.**
759 759  
760 -Unix time is 0x6788DB63 = 1737022307s = 2025/1/16 10:11:47
761 761  
762 -Its data format is:
763 -
764 -[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level, IN2_pin_level, Exti_pin_level, water_deep, Data_time],[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level, IN2_pin_level, Exti_pin_level, water_deep, Data_time],...
765 -
766 -Note: water_deep in the data needs to be converted using decoding to get it.
767 -
768 -
769 769  === 2.6.5 Decoder in TTN V3 ===
770 770  
771 771  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652862574387-195.png?width=722&height=359&rev=1.1||alt="1652862574387-195.png" height="359" width="722"]]
... ... @@ -792,47 +792,47 @@
792 792  
793 793  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
794 794  |(% style="background-color:#4f81bd; color:white; width:97px" %)(((
795 -Size(bytes)
796 -)))|(% style="background-color:#4f81bd; color:white; width:48px" %)2|(% style="background-color:#4f81bd; color:white; width:71px" %)2|(% style="background-color:#4f81bd; color:white; width:98px" %)2|(% style="background-color:#4f81bd; color:white; width:73px" %)2|(% style="background-color:#4f81bd; color:white; width:122px" %)1
797 -|(% style="width:98px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)(((
789 +**Size(bytes)**
790 +)))|(% style="background-color:#4f81bd; color:white; width:48px" %)**2**|(% style="background-color:#4f81bd; color:white; width:71px" %)**2**|(% style="background-color:#4f81bd; color:white; width:98px" %)**2**|(% style="background-color:#4f81bd; color:white; width:73px" %)**2**|(% style="background-color:#4f81bd; color:white; width:122px" %)**1**
791 +|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)(((
798 798  [[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]] & ROC_flag
799 799  )))
800 800  
801 -IN1 &IN2 , Interrupt  flag , ROC_flag:
795 +(% style="color:blue" %)**IN1 &IN2 , Interrupt  flag , ROC_flag:**
802 802  
803 803  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:515px" %)
804 -|(% style="background-color:#4f81bd; color:white; width:50px" %)Size(bit)|(% style="background-color:#4f81bd; color:white; width:60px" %)bit7|(% style="background-color:#4f81bd; color:white; width:62px" %)bit6|(% style="background-color:#4f81bd; color:white; width:62px" %)bit5|(% style="background-color:#4f81bd; color:white; width:65px" %)bit4|(% style="background-color:#4f81bd; color:white; width:56px" %)bit3|(% style="background-color:#4f81bd; color:white; width:55px" %)bit2|(% style="background-color:#4f81bd; color:white; width:55px" %)bit1|(% style="background-color:#4f81bd; color:white; width:50px" %)bit0
798 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:62px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:62px" %)**bit5**|(% style="background-color:#4f81bd; color:white; width:65px" %)**bit4**|(% style="background-color:#4f81bd; color:white; width:56px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:55px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:55px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:50px" %)**bit0**
805 805  |(% style="width:75px" %)Value|(% style="width:89px" %)IDC_Roc_flagL|(% style="width:46.5834px" %)IDC_Roc_flagH|(% style="width:1px" %)VDC_Roc_flagL|(% style="width:89px" %)VDC_Roc_flagH|(% style="width:89px" %)IN1_pin_level|(% style="width:103px" %)IN2_pin_level|(% style="width:103px" %)Exti_pin_level|(% style="width:103px" %)Exti_status
806 806  
807 -* IDC_Roc_flagL
801 +* (% style="color:#037691" %)**IDC_Roc_flagL**
808 808  
809 -80 (H): (0x80&0x80)=80(H)=1000 0000(B)  bit7=1, "TRUE", This uplink is triggered when the decrease in the IDC compared to the last ROC refresh exceeds the set threshold.
803 +80 (H): (0x80&0x80)=80(H)=**1**000 0000(B)  bit7=1, "TRUE", This uplink is triggered when the decrease in the IDC compared to the last ROC refresh exceeds the set threshold.
810 810  
811 811  60 (H): (0x60&0x80)=0  bit7=0, "FALSE", This uplink is not triggered when the decrease in the IDC compared to the last ROC refresh exceeds the set threshold.
812 812  
813 813  
814 -* IDC_Roc_flagH
808 +* (% style="color:#037691" %)**IDC_Roc_flagH**
815 815  
816 -60 (H): (0x60&0x40)=60(H)=01000 0000(B)  bit6=1, "TRUE", This uplink is triggered when the increase in the value of the IDC compared to the last ROC refresh exceeds the set threshold.
810 +60 (H): (0x60&0x40)=60(H)=0**1**000 0000(B)  bit6=1, "TRUE", This uplink is triggered when the increase in the value of the IDC compared to the last ROC refresh exceeds the set threshold.
817 817  
818 818  80 (H): (0x80&0x40)=0  bit6=0, "FALSE", This uplink is not triggered when the increase in the value of the IDC compared to the last ROC refresh exceeds the set threshold.
819 819  
820 820  
821 -* VDC_Roc_flagL
815 +* (% style="color:#037691" %)**VDC_Roc_flagL**
822 822  
823 -20 (H): (0x20&0x20)=20(H)=0010 0000(B)  bit5=1, "TRUE", This uplink is triggered when the decrease in the VDC compared to the last ROC refresh exceeds the set threshold.
817 +20 (H): (0x20&0x20)=20(H)=00**1**0 0000(B)  bit5=1, "TRUE", This uplink is triggered when the decrease in the VDC compared to the last ROC refresh exceeds the set threshold.
824 824  
825 825  90 (H): (0x90&0x20)=0  bit5=0, "FALSE", This uplink is not triggered when the decrease in the VDC compared to the last ROC refresh exceeds the set threshold.
826 826  
827 827  
828 -* VDC_Roc_flagH
822 +* (% style="color:#037691" %)**VDC_Roc_flagH**
829 829  
830 -90 (H): (0x90&0x10)=10(H)=0001 0000(B)  bit4=1, "TRUE", This uplink is triggered when the increase in the value of the VDC compared to the last ROC refresh exceeds the set threshold.
824 +90 (H): (0x90&0x10)=10(H)=000**1** 0000(B)  bit4=1, "TRUE", This uplink is triggered when the increase in the value of the VDC compared to the last ROC refresh exceeds the set threshold.
831 831  
832 832  20 (H): (0x20&0x10)=0  bit4=0, "FALSE", This uplink is not triggered when the increase in the value of the VDC compared to the last ROC refresh exceeds the set threshold.
833 833  
834 834  
835 -* IN1_pin_level & IN2_pin_level
829 +* (% style="color:#037691" %)**IN1_pin_level & IN2_pin_level**
836 836  
837 837  IN1 and IN2 are used as digital input pins.
838 838  
... ... @@ -841,15 +841,15 @@
841 841  80 (H): (0x09&0x04)=0    IN2 pin is low level.
842 842  
843 843  
844 -* Exti_pin_level &Exti_status
838 +* (% style="color:#037691" %)**Exti_pin_level &Exti_status**
845 845  
846 846  This data field shows whether the packet is generated by an interrupt pin.
847 847  
848 -Note: The Internet pin of the old motherboard is a separate pin in the screw terminal, and the interrupt pin of the new motherboard(SIB V1.3) is the GPIO_EXTI pin.
842 +Note: The Internet pin of the old motherboard is a separate pin in the screw terminal, and the interrupt pin of the new motherboard(SIB V1.3) is the **GPIO_EXTI** pin.
849 849  
850 -Exti_pin_level:  80 (H): (0x80&0x02)=0  "low", The level of the interrupt pin.
844 +**Exti_pin_level:**  80 (H): (0x80&0x02)=0  "low", The level of the interrupt pin.
851 851  
852 -Exti_status: 80 (H): (0x80&0x01)=0  "False", Normal uplink packet.
846 +**Exti_status: **80 (H): (0x80&0x01)=0  "False", Normal uplink packet.
853 853  
854 854  
855 855  === 2.8.2 Set the Report on Change ===
... ... @@ -860,61 +860,71 @@
860 860  
861 861  ==== 2.8.2.1 Wave alarm mode ====
862 862  
863 -
864 864  Feature: By setting the detection period and a change value, the IDC/VDC variable is monitored whether it exceeds the set change value. If this change value is exceeded, the ROC uplink is sent and the comparison value is flushed.
865 865  
866 -* Change value: The amount by which the next detection value increases/decreases relative to the previous detection value.
867 -* Comparison value: A parameter to compare with the latest ROC test.
859 +* (% style="color:#037691" %)**Change value: **(%%)The amount by which the next detection value increases/decreases relative to the previous detection value.
860 +* (% style="color:#037691" %)**Comparison value:**(%%) A parameter to compare with the latest ROC test.
868 868  
869 -AT Command: AT+ROC
862 +(% style="color:blue" %)**AT Command: AT+ROC**
870 870  
871 871  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
872 -|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)Command Example|=(% style="width: 154px; background-color: rgb(79, 129, 189); color: white;" %)Parameters|=(% style="width: 193px; background-color: rgb(79, 129, 189); color: white;" %)Response/Explanation
865 +|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 154px; background-color: rgb(79, 129, 189); color: white;" %)**Parameters**|=(% style="width: 197px; background-color: rgb(79, 129, 189); color: white;" %)**Response/Explanation**
873 873  |(% style="width:143px" %)AT+ROC=?|(% style="width:154px" %)Show current ROC setting|(% style="width:197px" %)(((
874 874  0,0,0,0(default)
875 875  OK
876 876  )))
877 877  |(% colspan="1" rowspan="4" style="width:143px" %)(((
871 +
872 +
873 +
874 +
878 878  AT+ROC=a,b,c,d
879 879  )))|(% style="width:154px" %)(((
880 -**a:** Enable or disable the ROC
877 +
878 +
879 +
880 +
881 +
882 +
883 +**a**: Enable or disable the ROC
881 881  )))|(% style="width:197px" %)(((
882 882  **0:** off
883 883  **1:** Turn on the wave alarm mode, send the ROC uplink when the increment exceeds the set parameter and refresh the comparison value.
884 -**2:** Turn on the wave alarm mode, send the ROC uplink when the increment exceeds the set parameter and refresh the comparison value. In addition, the comparison value is refreshed when the device sends packets ([[TDC>>||anchor="H3.3.1SetTransmitIntervalTime"]] or [[ACT>>||anchor="H1.7Button26LEDs"]]).
887 +
888 +**2: **Turn on the wave alarm mode, send the ROC uplink when the increment exceeds the set parameter and refresh the comparison value. In addition, the comparison value is refreshed when the device sends packets ([[TDC>>||anchor="H3.3.1SetTransmitIntervalTime"]] or [[ACT>>||anchor="H1.7Button26LEDs"]]).
885 885  )))
886 -|(% style="width:154px" %)**b:** Set the detection interval|(% style="width:197px" %)(((
890 +|(% style="width:154px" %)**b**: Set the detection interval|(% style="width:197px" %)(((
887 887  Range:  0~~65535s
888 888  )))
889 -|(% style="width:154px" %)**c:** Setting the IDC change value|(% style="width:197px" %)Unit: uA
890 -|(% style="width:154px" %)**d:** Setting the VDC change value|(% style="width:197px" %)Unit: mV
893 +|(% style="width:154px" %)**c**: Setting the IDC change value|(% style="width:197px" %)Unit: uA
894 +|(% style="width:154px" %)**d**: Setting the VDC change value|(% style="width:197px" %)Unit: mV
891 891  
892 -Example:
896 +**Example:**
893 893  
894 -* AT+ROC=0,0,0,0  ~/~/ The ROC function is not used.
898 +* AT+ROC=0,0,0,0  ~/~/The ROC function is not used.
895 895  * AT+ROC=1,60,3000, 500  ~/~/ Check value every 60 seconds. lf there is change in IDC (>3mA) or VDC (>500mV), sends an ROC uplink, and the comparison value is refreshed.
896 896  * AT+ROC=1,60,3000,0  ~/~/ Check value every 60 seconds. lf there is change in IDC (>3mA), send an ROC uplink and the comparison value of IDC is refreshed. dd=0 Means doesn't monitor Voltage.
897 897  * AT+ROC=2,60,3000,0  ~/~/ Check value every 60 seconds. lf there is change in IDC (>3mA), send an ROC uplink and the comparison value of IDC is refreshed. dd=0 Means doesn't monitor Voltage. In addition, if the change in the IDC does not exceed 3mA, then the ROC uplink is not sent, and the comparison value is not refreshed by the ROC uplink packet. However, if the device TDC time arrives, or if the user manually sends packets, then the IDC comparison value is also refreshed.
898 898  
899 -Downlink Command: 0x09 aa bb cc dd
903 +(% style="color:blue" %)**Downlink Command: 0x09 aa bb cc dd**
900 900  
901 901  Format: Function code (0x09) followed by 4 bytes.
902 902  
903 -aa: 1 byte; Set the wave alarm mode.
907 +(% style="color:blue" %)**aa: **(% style="color:#037691" %)**1 byte;**(%%) Set the wave alarm mode.
904 904  
905 -bb: 2 bytes; Set the detection interval. (second)
909 +(% style="color:blue" %)**bb: **(% style="color:#037691" %)**2 bytes;**(%%) Set the detection interval. (second)
906 906  
907 -cc: 2 bytes; Setting the IDC change threshold. (uA)
911 +(% style="color:blue" %)**cc: **(% style="color:#037691" %)**2 bytes;**(%%) Setting the IDC change threshold. (uA)
908 908  
909 -dd: 2 bytes; Setting the VDC change threshold. (mV)
913 +(% style="color:blue" %)**dd: **(% style="color:#037691" %)**2 bytes;**(%%) Setting the VDC change threshold. (mV)
910 910  
911 -Example:
915 +**Example:**
912 912  
913 -* Downlink Payload: 09 01 00 3C 0B B8 01 F4  ~/~/ Equal to AT+ROC=1,60,3000, 500
914 -* Downlink Payload: 09 01 00 3C 0B B8 00 00  ~/~/ Equal to AT+ROC=1,60,3000,0
915 -* Downlink Payload: 09 02 00 3C 0B B8 00 00  ~/~/ Equal to AT+ROC=2,60,3000,0
917 +* Downlink Payload: **09 01 00 3C 0B B8 01 F4 ** ~/~/Equal to AT+ROC=1,60,3000, 500
918 +* Downlink Payload: **09 01 00 3C 0B B8 00 00 ** ~/~/Equal to AT+ROC=1,60,3000,0
919 +* Downlink Payload: **09 02 00 3C 0B B8 00 00 ** ~/~/Equal to AT+ROC=2,60,3000,0
916 916  
917 -Screenshot of parsing example in TTN:
921 +(% style="color:blue" %)**Screenshot of parsing example in TTN:**
918 918  
919 919  * AT+ROC=1,60,3000, 500.
920 920  
... ... @@ -923,67 +923,72 @@
923 923  
924 924  ==== 2.8.2.2 Over-threshold alarm mode ====
925 925  
926 -
927 927  Feature: Monitors whether the IDC/VDC exceeds the threshold by setting the detection period and threshold. Alarm if the threshold is exceeded.
928 928  
929 -AT Command: AT+ROC=3,a,b,c,d,e
932 +(% style="color:blue" %)**AT Command: AT+ROC=3,a,b,c,d,e**
930 930  
931 931  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
932 -|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)Command Example|=(% style="width: 160px; background-color: rgb(79, 129, 189); color: white;" %)Parameters|=(% style="width: 187px; background-color: rgb(79, 129, 189); color: white;" %)Response/Explanation
935 +|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 160px; background-color: rgb(79, 129, 189); color: white;" %)**Parameters**|=(% style="width: 185px; background-color: rgb(79, 129, 189); color: white;" %)**Response/Explanation**
933 933  |(% style="width:143px" %)AT+ROC=?|(% style="width:160px" %)Show current ROC setting|(% style="width:185px" %)(((
934 934  0,0,0,0(default)
935 935  OK
936 936  )))
937 937  |(% colspan="1" rowspan="5" style="width:143px" %)(((
938 -AT+ROC=3,a,b,c,d,e
941 +
942 +
943 +
944 +
945 +AT+ROC=(% style="color:blue" %)**3**(%%),a,b,c,d,e
939 939  )))|(% style="width:160px" %)(((
940 -**a:** Set the detection interval
947 +**a: **Set the detection interval
941 941  )))|(% style="width:185px" %)(((
942 942  Range:  0~~65535s
943 943  )))
944 -|(% style="width:160px" %)**b:** Set the IDC alarm trigger condition|(% style="width:185px" %)(((
951 +|(% style="width:160px" %)**b**: Set the IDC alarm trigger condition|(% style="width:185px" %)(((
945 945  **0:** Less than the set IDC threshold, Alarm
953 +
946 946  **1:** Greater than the set IDC threshold, Alarm
947 947  )))
948 948  |(% style="width:160px" %)(((
949 -**c: ** IDC alarm threshold
957 +**c**:  IDC alarm threshold
950 950  )))|(% style="width:185px" %)(((
951 951  Unit: uA
952 952  )))
953 -|(% style="width:160px" %)**d:** Set the VDC alarm trigger condition|(% style="width:185px" %)(((
961 +|(% style="width:160px" %)**d**: Set the VDC alarm trigger condition|(% style="width:185px" %)(((
954 954  **0:** Less than the set VDC threshold, Alarm
963 +
955 955  **1:** Greater than the set VDC threshold, Alarm
956 956  )))
957 957  |(% style="width:160px" %)**e:** VDC alarm threshold|(% style="width:185px" %)Unit: mV
958 958  
959 -Example:
968 +**Example:**
960 960  
961 -* AT+ROC=3,60,0,3000,0,5000  ~/~/ The data is checked every 60 seconds. If the IDC is less than 3mA or the VDC is less than 5000mV, an alarm is generated.
962 -* AT+ROC=3,180,1,3000,1,5000  ~/~/ The data is checked every 180 seconds. If the IDC is greater than 3mA or the VDC is greater than 5000mV, an alarm is generated.
963 -* AT+ROC=3,300,0,3000,1,5000  ~/~/ The data is checked every 300 seconds. If the IDC is less than 3mA or the VDC is greater than 5000mV, an alarm is generated.
970 +* AT+ROC=3,60,0,3000,0,5000  ~/~/The data is checked every 60 seconds. If the IDC is less than 3mA or the VDC is less than 5000mV, an alarm is generated.
971 +* AT+ROC=3,180,1,3000,1,5000  ~/~/The data is checked every 180 seconds. If the IDC is greater than 3mA or the VDC is greater than 5000mV, an alarm is generated.
972 +* AT+ROC=3,300,0,3000,1,5000  ~/~/The data is checked every 300 seconds. If the IDC is less than 3mA or the VDC is greater than 5000mV, an alarm is generated.
964 964  
965 -Downlink Command: 0x09 03 aa bb cc dd ee
974 +(% style="color:blue" %)**Downlink Command: 0x09 03 aa bb cc dd ee**
966 966  
967 967  Format: Function code (0x09) followed by 03 and the remaining 5 bytes.
968 968  
969 -aa: 2 bytes; Set the detection interval.(second)
978 +(% style="color:blue" %)**aa: **(% style="color:#037691" %)**2 bytes;**(%%) Set the detection interval.(second)
970 970  
971 -bb: 1 byte; Set the IDC alarm trigger condition.
980 +(% style="color:blue" %)**bb: **(% style="color:#037691" %)**1 byte; **(%%)Set the IDC alarm trigger condition.
972 972  
973 -cc: 2 bytes; IDC alarm threshold.(uA)
982 +(% style="color:blue" %)**cc: **(% style="color:#037691" %)**2 bytes;**(%%) IDC alarm threshold.(uA)
974 974  
975 975  
976 -dd: 1 byte; Set the VDC alarm trigger condition.
985 +(% style="color:blue" %)**dd: **(% style="color:#037691" %)**1 byte;**(%%) Set the VDC alarm trigger condition.
977 977  
978 -ee: 2 bytes; VDC alarm threshold.(mV)
987 +(% style="color:blue" %)**ee: **(% style="color:#037691" %)**2 bytes; **(%%)VDC alarm threshold.(mV)
979 979  
980 -Example:
989 +**Example:**
981 981  
982 -* Downlink Payload: 09 03 00 3C 00 0B B8 00 13 38 ~/~/ Equal to AT+ROC=3,60,0,3000,0,5000
983 -* Downlink Payload: 09 03 00 b4 01 0B B8 01 13 38  ~/~/ Equal to AT+ROC=3,60,1,3000,1,5000
984 -* Downlink Payload: 09 03 01 2C 00 0B B8 01 13 38  ~/~/ Equal to AT+ROC=3,60,0,3000,1,5000
991 +* Downlink Payload: **09 03 00 3C 00 0B B8 00 13 38** ~/~/Equal to AT+ROC=3,60,0,3000,0,5000
992 +* Downlink Payload: **09 03 00 b4 01 0B B8 01 13 38**  ~/~/Equal to AT+ROC=3,60,1,3000,1,5000
993 +* Downlink Payload: **09 03 01 2C 00 0B B8 01 13 38**  ~/~/Equal to AT+ROC=3,60,0,3000,1,5000
985 985  
986 -Screenshot of parsing example in TTN:
995 +(% style="color:blue" %)**Screenshot of parsing example in TTN:**
987 987  
988 988  * AT+ROC=3,60,0,3000,0,5000
989 989  
... ... @@ -993,7 +993,7 @@
993 993  == 2.9 ​Firmware Change Log ==
994 994  
995 995  
996 -Firmware download link:
1005 +**Firmware download link:**
997 997  
998 998  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
999 999  
... ... @@ -1005,7 +1005,7 @@
1005 1005  
1006 1006  PS-LB/LS supports below configure method:
1007 1007  
1008 -* AT Command via Bluetooth Connection (Recommand Way): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
1017 +* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
1009 1009  * AT Command via UART Connection : See [[FAQ>>||anchor="H6.FAQ"]].
1010 1010  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
1011 1011  
... ... @@ -1033,10 +1033,10 @@
1033 1033  
1034 1034  Feature: Change LoRaWAN End Node Transmit Interval.
1035 1035  
1036 -AT Command: AT+TDC
1045 +(% style="color:blue" %)**AT Command: AT+TDC**
1037 1037  
1038 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1039 -|=(% style="width: 160px; background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 160px; background-color:#4F81BD;color:white" %)Function|=(% style="width: 190px;background-color:#4F81BD;color:white" %)Response
1047 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1048 +|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 190px;background-color:#4F81BD;color:white" %)**Response**
1040 1040  |(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=?|(% style="background-color:#f2f2f2; width:166px" %)Show current transmit Interval|(% style="background-color:#f2f2f2" %)(((
1041 1041  30000
1042 1042  OK
... ... @@ -1047,7 +1047,7 @@
1047 1047  Set transmit interval to 60000ms = 60 seconds
1048 1048  )))
1049 1049  
1050 -Downlink Command: 0x01
1059 +(% style="color:blue" %)**Downlink Command: 0x01**
1051 1051  
1052 1052  Format: Command Code (0x01) followed by 3 bytes time value.
1053 1053  
... ... @@ -1061,10 +1061,10 @@
1061 1061  
1062 1062  Feature, Set Interrupt mode for GPIO_EXIT.
1063 1063  
1064 -AT Command: AT+INTMOD
1073 +(% style="color:blue" %)**AT Command: AT+INTMOD**
1065 1065  
1066 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1067 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 196px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 160px;background-color:#4F81BD;color:white" %)Response
1075 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1076 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Response**
1068 1068  |(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=?|(% style="background-color:#f2f2f2; width:196px" %)Show current interrupt mode|(% style="background-color:#f2f2f2; width:157px" %)(((
1069 1069  0
1070 1070  OK
... ... @@ -1078,7 +1078,7 @@
1078 1078  3. (Trigger by rising edge)
1079 1079  )))|(% style="background-color:#f2f2f2; width:157px" %)OK
1080 1080  
1081 -Downlink Command: 0x06
1090 +(% style="color:blue" %)**Downlink Command: 0x06**
1082 1082  
1083 1083  Format: Command Code (0x06) followed by 3 bytes.
1084 1084  
... ... @@ -1092,10 +1092,10 @@
1092 1092  
1093 1093  Feature, Control the output 3V3 , 5V or 12V.
1094 1094  
1095 -AT Command: AT+3V3T
1104 +(% style="color:blue" %)**AT Command: AT+3V3T**
1096 1096  
1097 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:474px" %)
1098 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 201px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 119px;background-color:#4F81BD;color:white" %)Response
1106 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:474px" %)
1107 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 201px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 119px;background-color:#4F81BD;color:white" %)**Response**
1099 1099  |(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=?|(% style="background-color:#f2f2f2; width:201px" %)Show 3V3 open time.|(% style="background-color:#f2f2f2; width:116px" %)(((
1100 1100  0
1101 1101  OK
... ... @@ -1111,10 +1111,10 @@
1111 1111  OK
1112 1112  )))
1113 1113  
1114 -AT Command: AT+5VT
1123 +(% style="color:blue" %)**AT Command: AT+5VT**
1115 1115  
1116 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:470px" %)
1117 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 196px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 119px;background-color:#4F81BD;color:white" %)Response
1125 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:470px" %)
1126 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 119px;background-color:#4F81BD;color:white" %)**Response**
1118 1118  |(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=?|(% style="background-color:#f2f2f2; width:196px" %)Show 5V open time.|(% style="background-color:#f2f2f2; width:114px" %)(((
1119 1119  0
1120 1120  OK
... ... @@ -1130,10 +1130,10 @@
1130 1130  OK
1131 1131  )))
1132 1132  
1133 -AT Command: AT+12VT
1142 +(% style="color:blue" %)**AT Command: AT+12VT**
1134 1134  
1135 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:443px" %)
1136 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 199px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 88px;background-color:#4F81BD;color:white" %)Response
1144 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:443px" %)
1145 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 199px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 88px;background-color:#4F81BD;color:white" %)**Response**
1137 1137  |(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=?|(% style="background-color:#f2f2f2; width:199px" %)Show 12V open time.|(% style="background-color:#f2f2f2; width:83px" %)(((
1138 1138  0
1139 1139  OK
... ... @@ -1143,28 +1143,28 @@
1143 1143  OK
1144 1144  )))
1145 1145  
1146 -Downlink Command: 0x07
1155 +(% style="color:blue" %)**Downlink Command: 0x07**
1147 1147  
1148 1148  Format: Command Code (0x07) followed by 3 bytes.
1149 1149  
1150 1150  The first byte is which power, the second and third bytes are the time to turn on.
1151 1151  
1152 -* Example 1: Downlink Payload: 070101F4  ~-~-->  AT+3V3T=500
1153 -* Example 2: Downlink Payload: 0701FFFF   ~-~-->  AT+3V3T=65535
1154 -* Example 3: Downlink Payload: 070203E8  ~-~-->  AT+5VT=1000
1155 -* Example 4: Downlink Payload: 07020000  ~-~-->  AT+5VT=0
1156 -* Example 5: Downlink Payload: 070301F4  ~-~-->  AT+12VT=500
1157 -* Example 6: Downlink Payload: 07030000  ~-~-->  AT+12VT=0
1161 +* Example 1: Downlink Payload: 070101F4  **~-~-->**  AT+3V3T=500
1162 +* Example 2: Downlink Payload: 0701FFFF   **~-~-->**  AT+3V3T=65535
1163 +* Example 3: Downlink Payload: 070203E8  **~-~-->**  AT+5VT=1000
1164 +* Example 4: Downlink Payload: 07020000  **~-~-->**  AT+5VT=0
1165 +* Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
1166 +* Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
1158 1158  
1159 -Note: Before v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 65535 milliseconds. After v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 180 seconds.
1168 +(% style="color:red" %)**Note: Before v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 65535 milliseconds. After v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 180 seconds.**
1160 1160  
1161 -Therefore, the corresponding downlink command is increased by one byte to five bytes.
1170 +(% style="color:red" %)**Therefore, the corresponding downlink command is increased by one byte to five bytes.**
1162 1162  
1163 -Example:
1172 +**Example: **
1164 1164  
1165 -* 120s=120000ms(D) =0x01D4C0(H), Downlink Payload: 07 01 01 D4 C0  ~-~-->  AT+3V3T=120000
1166 -* 100s=100000ms(D) =0x0186A0(H), Downlink Payload: 07 02 01 86 A0  ~-~-->  AT+5VT=100000
1167 -* 80s=80000ms(D) =0x013880(H), Downlink Payload: 07 03 01 38 80  ~-~-->  AT+12VT=80000
1174 +* 120s=120000ms(D) =0x01D4C0(H), Downlink Payload: 07 **01** 01 D4 C0  **~-~-->**  AT+3V3T=120000
1175 +* 100s=100000ms(D) =0x0186A0(H), Downlink Payload: 07 **02** 01 86 A0  **~-~-->**  AT+5VT=100000
1176 +* 80s=80000ms(D) =0x013880(H), Downlink Payload: 07 **03** 01 38 80  **~-~-->**  AT+12VT=80000
1168 1168  
1169 1169  === 3.3.4 Set the Probe Model ===
1170 1170  
... ... @@ -1171,7 +1171,7 @@
1171 1171  
1172 1172  Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
1173 1173  
1174 -AT Command: AT +PROBE
1183 +(% style="color:blue" %)**AT Command: AT** **+PROBE**
1175 1175  
1176 1176  AT+PROBE=aabb
1177 1177  
... ... @@ -1190,7 +1190,7 @@
1190 1190  (0~~100Pa->01,0~~200Pa->02,0~~300Pa->03,0~~1KPa->04,0~~2KPa->05,0~~3KPa->06,0~~4KPa->07,0~~5KPa->08,0~~10KPa->09,-100~~ 100Pa->0A,-200~~ 200Pa->0B,-1~~ 1KPa->0C)
1191 1191  
1192 1192  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1193 -|(% style="background-color:#4f81bd; color:white; width:154px" %)Command Example|(% style="background-color:#4f81bd; color:white; width:269px" %)Function|(% style="background-color:#4f81bd; color:white" %)Response
1202 +|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Function**|(% style="background-color:#4f81bd; color:white" %)**Response**
1194 1194  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=?|(% style="background-color:#f2f2f2; width:269px" %)Get or Set the probe model.|(% style="background-color:#f2f2f2" %)0
1195 1195  OK
1196 1196  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0003|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 3m type.|(% style="background-color:#f2f2f2" %)OK
... ... @@ -1201,12 +1201,12 @@
1201 1201  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0101|(% style="background-color:#f2f2f2; width:269px" %)Set pressure transmitters mode, first type(A).|(% style="background-color:#f2f2f2" %)OK
1202 1202  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0000|(% style="background-color:#f2f2f2; width:269px" %)Initial state, no settings.|(% style="background-color:#f2f2f2" %)OK
1203 1203  
1204 -Downlink Command: 0x08
1213 +(% style="color:blue" %)**Downlink Command: 0x08**
1205 1205  
1206 1206  Format: Command Code (0x08) followed by 2 bytes.
1207 1207  
1208 -* Example 1: Downlink Payload: 080003  ~-~-->  AT+PROBE=0003
1209 -* Example 2: Downlink Payload: 080101  ~-~-->  AT+PROBE=0101
1217 +* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
1218 +* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
1210 1210  
1211 1211  === 3.3.5 Multiple collections are one uplink (Since firmware V1.1) ===
1212 1212  
... ... @@ -1213,41 +1213,41 @@
1213 1213  
1214 1214  Added AT+STDC command to collect the voltage of VDC_INPUT/IDC_INPUT multiple times and upload it at one time.
1215 1215  
1216 -AT Command: AT +STDC
1225 +(% style="color:blue" %)**AT Command: AT** **+STDC**
1217 1217  
1218 1218  AT+STDC=aa,bb,bb
1219 1219  
1220 -aa:
1221 -0: means disable this function and use TDC to send packets.
1222 -1: means that the function is enabled to send packets by collecting VDC data for multiple times.
1223 -2: means that the function is enabled to send packets by collecting IDC data for multiple times.
1224 -bb: Each collection interval (s), the value is 1~~65535
1225 -cc: the number of collection times, the value is 1~~120
1229 +(% style="color:#037691" %)**aa:**(%%)
1230 +**0:** means disable this function and use TDC to send packets.
1231 +**1:** means that the function is enabled to send packets by collecting VDC data for multiple times.
1232 +**2:** means that the function is enabled to send packets by collecting IDC data for multiple times.
1233 +(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
1234 +(% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
1226 1226  
1227 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1228 -|(% style="background-color:#4f81bd; color:white; width:160px" %)Command Example|(% style="background-color:#4f81bd; color:white; width:215px" %)Function|(% style="background-color:#4f81bd; color:white" %)Response
1236 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1237 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white" %)**Response**
1229 1229  |(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=?|(% style="background-color:#f2f2f2; width:215px" %)Get the mode of multiple acquisitions and one uplink.|(% style="background-color:#f2f2f2" %)1,10,18
1230 1230  OK
1231 1231  |(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=1,10,18|(% style="background-color:#f2f2f2; width:215px" %)Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(% style="background-color:#f2f2f2" %)(((
1232 1232  Attention:Take effect after ATZ
1242 +
1233 1233  OK
1234 1234  )))
1235 1235  |(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=0, 0,0|(% style="background-color:#f2f2f2; width:215px" %)(((
1236 -
1237 -
1238 1238  Use the TDC interval to send packets.(default)
1239 1239  
1240 1240  
1241 1241  )))|(% style="background-color:#f2f2f2" %)(((
1242 1242  Attention:Take effect after ATZ
1251 +
1243 1243  OK
1244 1244  )))
1245 1245  
1246 -Downlink Command: 0xAE
1255 +(% style="color:blue" %)**Downlink Command: 0xAE**
1247 1247  
1248 1248  Format: Command Code (0xAE) followed by 4 bytes.
1249 1249  
1250 -* Example 1: Downlink Payload: AE 01 02 58 12 ~-~-->  AT+STDC=1,600,18
1259 +* Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
1251 1251  
1252 1252  = 4. Battery & Power Consumption =
1253 1253  
... ... @@ -1254,7 +1254,7 @@
1254 1254  
1255 1255  PS-LB use ER26500 + SPC1520 battery pack and PS-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1256 1256  
1257 -[[Battery Info & Power Consumption Analyze>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1266 +[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1258 1258  
1259 1259  
1260 1260  = 5. OTA firmware update =
... ... @@ -1290,22 +1290,22 @@
1290 1290  Test the current values at the depth of different liquids and convert them to a linear scale.
1291 1291  Replace its ratio with the ratio of water to current in the decoder.
1292 1292  
1293 -Example:
1302 +**Example:**
1294 1294  
1295 1295  Measure the corresponding current of the sensor when the liquid depth is 2.04m and 0.51m.
1296 1296  
1297 -Calculate scale factor:
1306 +**Calculate scale factor：**
1298 1298  Use these two data to calculate the current and depth scaling factors：(7.888-5.035)/(2.04-0.51)=1.86470588235294
1299 1299  
1300 -Calculation formula:
1309 +**Calculation formula：**
1301 1301  
1302 1302  Use the calibration formula：(Current current - Minimum calibration current)/Scale factor + Minimum actual calibration height
1303 1303  
1304 -Actual calculations:
1313 +**Actual calculations：**
1305 1305  
1306 1306  Use this formula to calculate the value corresponding to the current at a depth of 1.5 meters: (6.918-5.035)/1.86470588235294+0.51=1.519810726
1307 1307  
1308 -Error:
1317 +**Error：**
1309 1309  
1310 1310  0.009810726
1311 1311  
... ... @@ -1312,7 +1312,6 @@
1312 1312  
1313 1313  [[image:image-20240329175044-1.png]]
1314 1314  
1315 -
1316 1316  = 7. Troubleshooting =
1317 1317  
1318 1318  == 7.1 Water Depth Always shows 0 in payload ==
... ... @@ -1329,42 +1329,19 @@
1329 1329  
1330 1330  = 8. Order Info =
1331 1331  
1332 -== 8.1 Thread Installation Type & Immersion Type Pressure Sensor ==
1333 1333  
1341 +(% style="display:none" %)
1334 1334  
1335 -Part Number: (% style="color:blue" %)**PS-NB/NS-Txx-YY  or  PS-NB/NS-Ixx-YY**
1336 -
1337 -(% style="color:blue" %)**XX:**(%%)** Pressure Range and Thread Type **
1338 -
1339 -(% style="color:blue" %)**YY:**(%%)** The default frequency band**
1340 -
1341 -* YY: Frequency Bands, options: EU433,CN470,EU868,IN865,KR920,AS923,AU915,US915
1342 -
1343 1343  [[image:image-20241021093209-1.png]]
1344 1344  
1345 -
1346 -== 8.2 Wireless Differential Air Pressure Sensor ==
1347 -
1348 -
1349 -Part Number: (% style="color:blue" %)**PS-LB-Dxx-YY  or  PS-LS-Dxx-YY **
1350 -
1351 -(% style="color:blue" %)**XX:**(%%)** Differential Pressure Range**
1352 -
1353 -(% style="color:blue" %)**YY:**(%%)** The default frequency band**
1354 -
1355 -* YY: Frequency Bands, options: EU433,CN470,EU868,IN865,KR920,AS923,AU915,US915
1356 -
1357 -[[image:image-20250401174215-1.png||height="486" width="656"]]
1358 -
1359 -
1360 1360  = 9. ​Packing Info =
1361 1361  
1362 1362  
1363 -Package Includes:
1348 +(% style="color:#037691" %)**Package Includes**:
1364 1364  
1365 -* PS-LB/LS-Txx/Ixx, PS-LB/LS-Dxx   LoRaWAN Pressure Sensor
1350 +* PS-LB or PS-LS LoRaWAN Pressure Sensor
1366 1366  
1367 -Dimension and weight:
1352 +(% style="color:#037691" %)**Dimension and weight**:
1368 1368  
1369 1369  * Device Size: cm
1370 1370  * Device Weight: g
image-20250401163539-2.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.1 KB
Content
image-20250401163826-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -18.9 KB
Content
image-20250401163906-4.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -181.6 KB
Content
image-20250401174215-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.3 KB
Content
image-20250419092225-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.6 KB
Content
image-20250419162538-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.3 KB
Content