Skip to Content
Last modified by Mengting Qiu on 2025/07/08 10:59
From version 129.2
edited by Xiaoling
on 2025/04/19 16:27
Change comment: There is no comment for this version
To version 123.1
edited by Xiaoling
on 2025/04/01 16:39
Change comment: Uploaded new attachment "image-20250401163906-4.jpeg", version {1}

Summary

Details

Page properties
Content
... ... @@ -2,7 +2,7 @@
2 2  
3 3  
4 4  (% style="text-align:center" %)
5 -[[image:image-20240109154731-4.png||height="546" width="769"]]
5 +[[image:image-20240109154731-4.png||height="671" width="945"]]
6 6  
7 7  
8 8  
... ... @@ -48,7 +48,9 @@
48 48  Each PS-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
49 49  )))
50 50  
51 +[[image:1675071321348-194.png]]
51 51  
53 +
52 52  == 1.2 ​Features ==
53 53  
54 54  
... ... @@ -134,7 +134,7 @@
134 134  === 1.4.2 Immersion Type ===
135 135  
136 136  
137 -[[image:image-20240109160445-5.png||height="199" width="150"]]
139 +[[image:image-20240109160445-5.png||height="221" width="166"]]
138 138  
139 139  * Immersion Type, Probe IP Level: IP68
140 140  * Measuring Range: Measure range can be customized, up to 100m.
... ... @@ -146,7 +146,7 @@
146 146  
147 147  === 1.4.3 Wireless Differential Air Pressure Sensor ===
148 148  
149 -[[image:image-20240511174954-1.png||height="193" width="193"]]
151 +[[image:image-20240511174954-1.png]]
150 150  
151 151  * Measuring Range: -100KPa~~0~~100KPa(Optional measuring range).
152 152  * Accuracy: 0.5% F.S, resolution is 0.05%.
... ... @@ -222,40 +222,36 @@
222 222  
223 223  Size of wind pressure transmitter:
224 224  
225 -[[image:image-20240513094047-2.png||height="462" width="518"]]
227 +[[image:image-20240513094047-2.png]]
226 226  
227 -(% style="color:red" %)**Note: The above dimensions are measured by hand, and the numerical error of the shell is within ±0.2mm.**
229 +Note: The above dimensions are measured by hand, and the numerical error of the shell is within ±0.2mm.
228 228  
229 229  
230 230  == 1.6 Sleep mode and working mode ==
231 231  
232 232  
233 -**Deep Sleep Mode:** Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
235 +(% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
234 234  
235 -**Working Mode: **In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
237 +(% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
236 236  
237 237  
238 238  == 1.7 Button & LEDs ==
239 239  
240 240  
241 -[[image:image-20250419092225-1.jpeg]]
243 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]](% style="display:none" %)
242 242  
243 243  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
244 -|=(% style="width: 167px;background-color:#4F81BD;color:white" %)Behavior on ACT|=(% style="width: 117px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 226px;background-color:#4F81BD;color:white" %)Action
246 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
245 245  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
246 -
247 -
248 -If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, blue led will blink once.
248 +If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
249 249  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
250 250  )))
251 251  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
252 -
253 -
254 -Green led will fast blink 5 times, device will enter OTA mode for 3 seconds. And then start to JOIN LoRaWAN network.
255 -Green led will solidly turn on for 5 seconds after joined in network.
252 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
253 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
256 256  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
257 257  )))
258 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)Red led will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
256 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
259 259  
260 260  == 1.8 Pin Mapping ==
261 261  
... ... @@ -283,13 +283,13 @@
283 283  === 1.10.1 for LB version ===
284 284  
285 285  
286 -[[image:image-20250401163530-1.jpeg]]
284 +[[image:image-20240109160800-6.png]]
287 287  
288 288  
289 289  === 1.10.2 for LS version ===
290 290  
291 291  
292 -[[image:image-20250401163539-2.jpeg]]
290 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1||alt="image-20231231203439-3.png"]]
293 293  
294 294  
295 295  = 2. Configure PS-LB/LS to connect to LoRaWAN network =
... ... @@ -297,7 +297,7 @@
297 297  == 2.1 How it works ==
298 298  
299 299  
300 -The PS-LB/LS is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
298 +The PS-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the PS-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
301 301  
302 302  
303 303  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -305,13 +305,13 @@
305 305  
306 306  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
307 307  
308 -[[image:image-20250419162538-1.png]]
306 +[[image:1675144005218-297.png]]
309 309  
310 310  
311 311  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
312 312  
313 313  
314 -Step 1: Create a device in TTN with the OTAA keys from PS-LB/LS.
312 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from PS-LB/LS.
315 315  
316 316  Each PS-LB/LS is shipped with a sticker with the default device EUI as below:
317 317  
... ... @@ -321,32 +321,32 @@
321 321  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
322 322  
323 323  
324 -Register the device
322 +(% style="color:blue" %)**Register the device**
325 325  
326 326  [[image:1675144099263-405.png]]
327 327  
328 328  
329 -Add APP EUI and DEV EUI
327 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
330 330  
331 331  [[image:1675144117571-832.png]]
332 332  
333 333  
334 -Add APP EUI in the application
332 +(% style="color:blue" %)**Add APP EUI in the application**
335 335  
336 336  
337 337  [[image:1675144143021-195.png]]
338 338  
339 339  
340 -Add APP KEY
338 +(% style="color:blue" %)**Add APP KEY**
341 341  
342 342  [[image:1675144157838-392.png]]
343 343  
344 -Step 2: Activate on PS-LB/LS
342 +(% style="color:blue" %)**Step 2:**(%%) Activate on PS-LB/LS
345 345  
346 346  
347 347  Press the button for 5 seconds to activate the PS-LB/LS.
348 348  
349 -Green led will fast blink 5 times, device will enter OTA mode for 3 seconds. And then start to JOIN LoRaWAN network. Green led will solidly turn on for 5 seconds after joined in network.
347 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
350 350  
351 351  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
352 352  
... ... @@ -361,9 +361,9 @@
361 361  Users can also use the downlink command(0x26 01) to ask PS-LB/LS to resend this uplink.
362 362  
363 363  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
364 -|(% colspan="6" style="background-color:#4f81bd; color:white" %)Device Status (FPORT=5)
365 -|(% style="background-color:#f2f2f2; width:103px" %)Size (bytes)|(% style="background-color:#f2f2f2; width:72px" %)1|(% style="background-color:#f2f2f2" %)2|(% style="background-color:#f2f2f2; width:91px" %)1|(% style="background-color:#f2f2f2; width:86px" %)1|(% style="background-color:#f2f2f2; width:44px" %)2
366 -|(% style="background-color:#f2f2f2; width:103px" %)Value|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
362 +|(% colspan="6" style="background-color:#4f81bd; color:white" %)**Device Status (FPORT=5)**
363 +|(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
364 +|(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
367 367  
368 368  Example parse in TTNv3
369 369  
... ... @@ -370,11 +370,11 @@
370 370  [[image:1675144504430-490.png]]
371 371  
372 372  
373 -Sensor Model: For PS-LB/LS, this value is 0x16
371 +(% style="color:#037691" %)**Sensor Model**(%%): For PS-LB/LS, this value is 0x16
374 374  
375 -Firmware Version: 0x0100, Means: v1.0.0 version
373 +(% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
376 376  
377 -Frequency Band:
375 +(% style="color:#037691" %)**Frequency Band**:
378 378  
379 379  *0x01: EU868
380 380  
... ... @@ -405,7 +405,7 @@
405 405  *0x0e: MA869
406 406  
407 407  
408 -Sub-Band:
406 +(% style="color:#037691" %)**Sub-Band**:
409 409  
410 410  AU915 and US915:value 0x00 ~~ 0x08
411 411  
... ... @@ -414,7 +414,7 @@
414 414  Other Bands: Always 0x00
415 415  
416 416  
417 -Battery Info:
415 +(% style="color:#037691" %)**Battery Info**:
418 418  
419 419  Check the battery voltage.
420 420  
... ... @@ -429,12 +429,10 @@
429 429  Uplink payload includes in total 9 bytes.
430 430  
431 431  
432 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
430 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
433 433  |(% style="background-color:#4f81bd; color:white; width:97px" %)(((
434 -
435 -
436 -Size(bytes)
437 -)))|(% style="background-color:#4f81bd; color:white; width:50px" %)2|(% style="background-color:#4f81bd; color:white; width:71px" %)2|(% style="background-color:#4f81bd; color:white; width:98px" %)2|(% style="background-color:#4f81bd; color:white; width:73px" %)2|(% style="background-color:#4f81bd; color:white; width:122px" %)1
432 +**Size(bytes)**
433 +)))|(% style="background-color:#4f81bd; color:white; width:48px" %)**2**|(% style="background-color:#4f81bd; color:white; width:71px" %)**2**|(% style="background-color:#4f81bd; color:white; width:98px" %)**2**|(% style="background-color:#4f81bd; color:white; width:73px" %)**2**|(% style="background-color:#4f81bd; color:white; width:122px" %)**1**
438 438  |(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
439 439  
440 440  [[image:1675144608950-310.png]]
... ... @@ -456,10 +456,10 @@
456 456  PS-LB/LS has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe. 
457 457  
458 458  
459 -For example.
455 +**For example.**
460 460  
461 461  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
462 -|(% style="background-color:#4f81bd; color:white" %)Part Number|(% style="background-color:#4f81bd; color:white" %)Probe Used|(% style="background-color:#4f81bd; color:white" %)4~~20mA scale|(% style="background-color:#4f81bd; color:white" %)Example: 12mA meaning
458 +|(% style="background-color:#4f81bd; color:white" %)**Part Number**|(% style="background-color:#4f81bd; color:white" %)**Probe Used**|(% style="background-color:#4f81bd; color:white" %)**4~~20mA scale**|(% style="background-color:#4f81bd; color:white" %)**Example: 12mA meaning**
463 463  |(% style="background-color:#f2f2f2" %)PS-LB/LS-I3|(% style="background-color:#f2f2f2" %)immersion type with 3 meters cable|(% style="background-color:#f2f2f2" %)0~~3 meters|(% style="background-color:#f2f2f2" %)1.5 meters pure water
464 464  |(% style="background-color:#f2f2f2" %)PS-LB/LS-I5|(% style="background-color:#f2f2f2" %)immersion type with 5 meters cable|(% style="background-color:#f2f2f2" %)0~~5 meters|(% style="background-color:#f2f2f2" %)2.5 meters pure water
465 465  |(% style="background-color:#f2f2f2" %)PS-LB/LS-T20-B|(% style="background-color:#f2f2f2" %)T20 threaded probe|(% style="background-color:#f2f2f2" %)0~~1MPa|(% style="background-color:#f2f2f2" %)0.5MPa air / gas or water pressure
... ... @@ -470,9 +470,9 @@
470 470  === 2.3.5 0~~20mA value (IDC_IN) ===
471 471  
472 472  
473 -The output value from Pressure Probe, use together with Probe Model to get the pressure value or water level.
469 +The output value from **Pressure Probe**, use together with Probe Model to get the pressure value or water level.
474 474  
475 -Example:
471 +(% style="color:#037691" %)**Example**:
476 476  
477 477  27AE(H) = 10158 (D)/1000 = 10.158mA.
478 478  
... ... @@ -487,7 +487,7 @@
487 487  
488 488  Measure the voltage value. The range is 0 to 30V.
489 489  
490 -Example:
486 +(% style="color:#037691" %)**Example**:
491 491  
492 492  138E(H) = 5006(D)/1000= 5.006V
493 493  
... ... @@ -497,7 +497,7 @@
497 497  
498 498  IN1 and IN2 are used as digital input pins.
499 499  
500 -Example:
496 +(% style="color:#037691" %)**Example**:
501 501  
502 502  09 (H): (0x09&0x08)>>3=1    IN1 pin is high level.
503 503  
... ... @@ -504,9 +504,9 @@
504 504  09 (H): (0x09&0x04)>>2=0    IN2 pin is low level.
505 505  
506 506  
507 -This data field shows if this packet is generated by Interrupt Pin or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
503 +This data field shows if this packet is generated by (% style="color:blue" %)**Interrupt Pin** (%%)or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
508 508  
509 -Example:
505 +(% style="color:#037691" %)**Example:**
510 510  
511 511  09 (H): (0x09&0x02)>>1=1    The level of the interrupt pin.
512 512  
... ... @@ -520,13 +520,9 @@
520 520  
521 521  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
522 522  |(% style="background-color:#4f81bd; color:white; width:65px" %)(((
523 -
524 -
525 -Size(bytes)
526 -)))|(% style="background-color:#4f81bd; color:white; width:35px" %)2|(% style="background-color:#4f81bd; color:white; width:400px" %)n
519 +**Size(bytes)**
520 +)))|(% style="background-color:#4f81bd; color:white; width:35px" %)**2**|(% style="background-color:#4f81bd; color:white; width:400px" %)**n**
527 527  |(% style="width:94px" %)Value|(% style="width:43px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:367px" %)(((
528 -
529 -
530 530  Voltage value, each 2 bytes is a set of voltage values.
531 531  )))
532 532  
... ... @@ -559,9 +559,9 @@
559 559  
560 560  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
561 561  
562 -Step 1: Be sure that your device is programmed and properly connected to the network at this time.
554 +(% style="color:blue" %)**Step 1: **(%%)Be sure that your device is programmed and properly connected to the network at this time.
563 563  
564 -Step 2: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
556 +(% style="color:blue" %)**Step 2:**(%%) To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
565 565  
566 566  [[image:1675144951092-237.png]]
567 567  
... ... @@ -569,9 +569,9 @@
569 569  [[image:1675144960452-126.png]]
570 570  
571 571  
572 -Step 3: Create an account or log in Datacake.
564 +(% style="color:blue" %)**Step 3:**(%%) Create an account or log in Datacake.
573 573  
574 -Step 4: Create PS-LB/LS product.
566 +(% style="color:blue" %)**Step 4:** (%%)Create PS-LB/LS product.
575 575  
576 576  [[image:1675145004465-869.png]]
577 577  
... ... @@ -582,7 +582,7 @@
582 582  [[image:1675145029119-717.png]]
583 583  
584 584  
585 -Step 5: add payload decode
577 +(% style="color:blue" %)**Step 5: **(%%)add payload decode
586 586  
587 587  [[image:1675145051360-659.png]]
588 588  
... ... @@ -606,13 +606,13 @@
606 606  
607 607  PS-LB uses Unix TimeStamp format based on
608 608  
609 -[[image:image-20250401163826-3.jpeg]]
601 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861618065-927.png?width=705&height=109&rev=1.1||alt="1652861618065-927.png" height="109" width="705"]]
610 610  
611 611  Users can get this time from the link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
612 612  
613 613  Below is the converter example:
614 614  
615 -[[image:image-20250401163906-4.jpeg]]
607 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652861637105-371.png?width=732&height=428&rev=1.1||alt="1652861637105-371.png"]]
616 616  
617 617  
618 618  === 2.6.2 Set Device Time ===
... ... @@ -621,16 +621,16 @@
621 621  There are two ways to set the device's time:
622 622  
623 623  
624 -~1. Through LoRaWAN MAC Command (Default settings)
616 +(% style="color:blue" %)**1. Through LoRaWAN MAC Command (Default settings)**
625 625  
626 626  Users need to set SYNCMOD=1 to enable sync time via the MAC command.
627 627  
628 628  Once CPL01 Joined the LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to CPL01. If CPL01 fails to get the time from the server, CPL01 will use the internal time and wait for the next time request ~[[[via Device Status (FPORT=5)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.1DeviceStatus2CFPORT3D5]]].
629 629  
630 -Note: LoRaWAN Server needs to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature.
622 +(% style="color:red" %)**Note: LoRaWAN Server needs to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature.**
631 631  
632 632  
633 - 2. Manually Set Time
625 +(% style="color:blue" %)** 2. Manually Set Time**
634 634  
635 635  Users need to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
636 636  
... ... @@ -640,8 +640,8 @@
640 640  Users can poll sensor values based on timestamps. Below is the downlink command.
641 641  
642 642  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:470px" %)
643 -|=(% colspan="4" style="width: 160px; background-color:#4F81BD;color:white" %)Downlink Command to poll Open/Close status (0x31)
644 -|(% style="background-color:#f2f2f2; width:67px" %)1byte|(% style="background-color:#f2f2f2; width:145px" %)4bytes|(% style="background-color:#f2f2f2; width:133px" %)4bytes|(% style="background-color:#f2f2f2; width:163px" %)1byte
635 +|=(% colspan="4" style="width: 160px; background-color:#4F81BD;color:white" %)**Downlink Command to poll Open/Close status (0x31)**
636 +|(% style="background-color:#f2f2f2; width:67px" %)**1byte**|(% style="background-color:#f2f2f2; width:145px" %)**4bytes**|(% style="background-color:#f2f2f2; width:133px" %)**4bytes**|(% style="background-color:#f2f2f2; width:163px" %)**1byte**
645 645  |(% style="background-color:#f2f2f2; width:67px" %)31|(% style="background-color:#f2f2f2; width:145px" %)Timestamp start|(% style="background-color:#f2f2f2; width:133px" %)(((
646 646  Timestamp end
647 647  )))|(% style="background-color:#f2f2f2; width:163px" %)Uplink Interval
... ... @@ -660,30 +660,36 @@
660 660  
661 661  The Datalog uplinks will use below payload format.
662 662  
663 -Retrieval data payload:
655 +**Retrieval data payload:**
664 664  
665 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
657 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
666 666  |=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
667 -Size(bytes)
668 -)))|=(% style="width: 70px; background-color:#4F81BD;color:white" %)2|=(% style="width: 70px; background-color:#4F81BD;color:white" %)2|=(% style="width: 80px; background-color: rgb(79, 129, 189); color: white;" %)2|=(% style="width: 150px; background-color: rgb(79, 129, 189); color: white;" %)1|=(% style="width: 80px; background-color: rgb(79, 129, 189); color: white;" %)4
659 +**Size(bytes)**
660 +)))|=(% style="width: 40px; background-color:#4F81BD;color:white" %)**2**|=(% style="width: 55px; background-color:#4F81BD;color:white" %)**2**|=(% style="width: 83px; background-color: rgb(79, 129, 189); color: white;" %)**2**|=(% style="width: 201px; background-color: rgb(79, 129, 189); color: white;" %)**1**|=(% style="width: 86px; background-color: rgb(79, 129, 189); color: white;" %)**4**
669 669  |(% style="width:103px" %)Value|(% style="width:68px" %)(((
670 -Probe_mod
662 +Probe
663 +
664 +_mod
671 671  )))|(% style="width:104px" %)(((
672 -VDC_intput_V
666 +VDC
667 +
668 +_intput_V
673 673  )))|(% style="width:83px" %)(((
674 -IDC_intput_mA
670 +IDC
671 +
672 +_intput_mA
675 675  )))|(% style="width:201px" %)(((
676 676  IN1_pin_level& IN2_pin_level& Exti_pin_level&Exti_status
677 677  )))|(% style="width:86px" %)Unix Time Stamp
678 678  
679 -IN1_pin_level & IN2_pin_level & Exti_pin_level & Exti_status:
677 +**IN1_pin_level & IN2_pin_level & Exti_pin_level & Exti_status:**
680 680  
681 681  [[image:image-20250117104847-4.png]]
682 682  
683 683  
684 -No ACK Message:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for PNACKMD=1 feature)
682 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
685 685  
686 -Poll Message Flag: 1: This message is a poll message reply.
684 +**Poll Message Flag**: 1: This message is a poll message reply.
687 687  
688 688  * Poll Message Flag is set to 1.
689 689  
... ... @@ -691,17 +691,17 @@
691 691  
692 692  For example, in US915 band, the max payload for different DR is:
693 693  
694 -a) DR0: max is 11 bytes so one entry of data
692 +**a) DR0:** max is 11 bytes so one entry of data
695 695  
696 -b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
694 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
697 697  
698 -c) DR2: total payload includes 11 entries of data
696 +**c) DR2:** total payload includes 11 entries of data
699 699  
700 -d) DR3: total payload includes 22 entries of data.
698 +**d) DR3: **total payload includes 22 entries of data.
701 701  
702 702  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
703 703  
704 -Example:
702 +**Example:**
705 705  
706 706  If PS-LB-NA has below data inside Flash:
707 707  
... ... @@ -715,46 +715,53 @@
715 715   Stop time: 6788DB63 = time 25/1/16 10:11:47
716 716  
717 717  
718 -PA-LB-NA will uplink this payload.
716 +**PA-LB-NA will uplink this payload.**
719 719  
720 720  [[image:image-20250117104827-2.png]]
721 721  
722 -
720 +(((
723 723  00001B620000406788D9BF  00000D130000406788D9FB  00000D120000406788DA37  00000D110000406788DA73  00000D100000406788DAAF  00000D100000406788DAEB  00000D0F0000406788DB27  00000D100000406788DB63
722 +)))
724 724  
725 -
724 +(((
726 726  Where the first 11 bytes is for the first entry :
726 +)))
727 727  
728 -
728 +(((
729 729  0000  0D10  0000  40  6788DB63
730 +)))
730 730  
732 +(((
733 +**Probe_mod **= 0x0000 = 0000
734 +)))
731 731  
732 -Probe_mod = 0x0000 = 0000
736 +(((
737 +**VDC_intput_V **= 0x0D10/1000=3.344V
733 733  
739 +**IDC_intput_mA **= 0x0000/1000=0mA
740 +)))
734 734  
735 -VDC_intput_V = 0x0D10/1000=3.344V
742 +(((
743 +**IN1_pin_level **= (0x40& 0x08)? "High":"Low" = 0(Low)
736 736  
737 -IDC_intput_mA = 0x0000/1000=0mA
745 +**IN2_pin_level = (**0x40& 0x04)? "High":"Low" = 0(Low)
738 738  
747 +**Exti_pin_level = (**0x40& 0x02)? "High":"Low" = 0(Low)
739 739  
740 -IN1_pin_level = (0x40& 0x08)? "High":"Low" = 0(Low)
749 +**Exti_status = (**0x40& 0x01)? "True":"False" = 0(False)
750 +)))
741 741  
742 -IN2_pin_level = (0x40& 0x04)? "High":"Low" = 0(Low)
752 +(((
753 +**Unix time** is 0x6788DB63 = 1737022307s = 2025/1/16 10:11:47
754 +)))
743 743  
744 -Exti_pin_level = (0x40& 0x02)? "High":"Low" = 0(Low)
756 +**Its data format is:**
745 745  
746 -Exti_status = (0x40& 0x01)? "True":"False" = 0(False)
758 +[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level**, **IN2_pin_level, Exti_pin_level, water_deep, Data_time],[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level**, **IN2_pin_level, Exti_pin_level, water_deep, Data_time],...
747 747  
760 +(% style="color:red" %)**Note: water_deep in the data needs to be converted using decoding to get it.**
748 748  
749 -Unix time is 0x6788DB63 = 1737022307s = 2025/1/16 10:11:47
750 750  
751 -Its data format is:
752 -
753 -[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level, IN2_pin_level, Exti_pin_level, water_deep, Data_time],[Probe_mod, VDC_intput_V, IDC_intput_mA, IN1_pin_level, IN2_pin_level, Exti_pin_level, water_deep, Data_time],...
754 -
755 -Note: water_deep in the data needs to be converted using decoding to get it.
756 -
757 -
758 758  === 2.6.5 Decoder in TTN V3 ===
759 759  
760 760  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652862574387-195.png?width=722&height=359&rev=1.1||alt="1652862574387-195.png" height="359" width="722"]]
... ... @@ -781,47 +781,47 @@
781 781  
782 782  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
783 783  |(% style="background-color:#4f81bd; color:white; width:97px" %)(((
784 -Size(bytes)
785 -)))|(% style="background-color:#4f81bd; color:white; width:48px" %)2|(% style="background-color:#4f81bd; color:white; width:71px" %)2|(% style="background-color:#4f81bd; color:white; width:98px" %)2|(% style="background-color:#4f81bd; color:white; width:73px" %)2|(% style="background-color:#4f81bd; color:white; width:122px" %)1
786 -|(% style="width:98px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)(((
789 +**Size(bytes)**
790 +)))|(% style="background-color:#4f81bd; color:white; width:48px" %)**2**|(% style="background-color:#4f81bd; color:white; width:71px" %)**2**|(% style="background-color:#4f81bd; color:white; width:98px" %)**2**|(% style="background-color:#4f81bd; color:white; width:73px" %)**2**|(% style="background-color:#4f81bd; color:white; width:122px" %)**1**
791 +|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)(((
787 787  [[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]] & ROC_flag
788 788  )))
789 789  
790 -IN1 &IN2 , Interrupt  flag , ROC_flag:
795 +(% style="color:blue" %)**IN1 &IN2 , Interrupt  flag , ROC_flag:**
791 791  
792 792  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:515px" %)
793 -|(% style="background-color:#4f81bd; color:white; width:50px" %)Size(bit)|(% style="background-color:#4f81bd; color:white; width:60px" %)bit7|(% style="background-color:#4f81bd; color:white; width:62px" %)bit6|(% style="background-color:#4f81bd; color:white; width:62px" %)bit5|(% style="background-color:#4f81bd; color:white; width:65px" %)bit4|(% style="background-color:#4f81bd; color:white; width:56px" %)bit3|(% style="background-color:#4f81bd; color:white; width:55px" %)bit2|(% style="background-color:#4f81bd; color:white; width:55px" %)bit1|(% style="background-color:#4f81bd; color:white; width:50px" %)bit0
798 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bit)**|(% style="background-color:#4f81bd; color:white; width:60px" %)**bit7**|(% style="background-color:#4f81bd; color:white; width:62px" %)**bit6**|(% style="background-color:#4f81bd; color:white; width:62px" %)**bit5**|(% style="background-color:#4f81bd; color:white; width:65px" %)**bit4**|(% style="background-color:#4f81bd; color:white; width:56px" %)**bit3**|(% style="background-color:#4f81bd; color:white; width:55px" %)**bit2**|(% style="background-color:#4f81bd; color:white; width:55px" %)**bit1**|(% style="background-color:#4f81bd; color:white; width:50px" %)**bit0**
794 794  |(% style="width:75px" %)Value|(% style="width:89px" %)IDC_Roc_flagL|(% style="width:46.5834px" %)IDC_Roc_flagH|(% style="width:1px" %)VDC_Roc_flagL|(% style="width:89px" %)VDC_Roc_flagH|(% style="width:89px" %)IN1_pin_level|(% style="width:103px" %)IN2_pin_level|(% style="width:103px" %)Exti_pin_level|(% style="width:103px" %)Exti_status
795 795  
796 -* IDC_Roc_flagL
801 +* (% style="color:#037691" %)**IDC_Roc_flagL**
797 797  
798 -80 (H): (0x80&0x80)=80(H)=1000 0000(B)  bit7=1, "TRUE", This uplink is triggered when the decrease in the IDC compared to the last ROC refresh exceeds the set threshold.
803 +80 (H): (0x80&0x80)=80(H)=**1**000 0000(B)  bit7=1, "TRUE", This uplink is triggered when the decrease in the IDC compared to the last ROC refresh exceeds the set threshold.
799 799  
800 800  60 (H): (0x60&0x80)=0  bit7=0, "FALSE", This uplink is not triggered when the decrease in the IDC compared to the last ROC refresh exceeds the set threshold.
801 801  
802 802  
803 -* IDC_Roc_flagH
808 +* (% style="color:#037691" %)**IDC_Roc_flagH**
804 804  
805 -60 (H): (0x60&0x40)=60(H)=01000 0000(B)  bit6=1, "TRUE", This uplink is triggered when the increase in the value of the IDC compared to the last ROC refresh exceeds the set threshold.
810 +60 (H): (0x60&0x40)=60(H)=0**1**000 0000(B)  bit6=1, "TRUE", This uplink is triggered when the increase in the value of the IDC compared to the last ROC refresh exceeds the set threshold.
806 806  
807 807  80 (H): (0x80&0x40)=0  bit6=0, "FALSE", This uplink is not triggered when the increase in the value of the IDC compared to the last ROC refresh exceeds the set threshold.
808 808  
809 809  
810 -* VDC_Roc_flagL
815 +* (% style="color:#037691" %)**VDC_Roc_flagL**
811 811  
812 -20 (H): (0x20&0x20)=20(H)=0010 0000(B)  bit5=1, "TRUE", This uplink is triggered when the decrease in the VDC compared to the last ROC refresh exceeds the set threshold.
817 +20 (H): (0x20&0x20)=20(H)=00**1**0 0000(B)  bit5=1, "TRUE", This uplink is triggered when the decrease in the VDC compared to the last ROC refresh exceeds the set threshold.
813 813  
814 814  90 (H): (0x90&0x20)=0  bit5=0, "FALSE", This uplink is not triggered when the decrease in the VDC compared to the last ROC refresh exceeds the set threshold.
815 815  
816 816  
817 -* VDC_Roc_flagH
822 +* (% style="color:#037691" %)**VDC_Roc_flagH**
818 818  
819 -90 (H): (0x90&0x10)=10(H)=0001 0000(B)  bit4=1, "TRUE", This uplink is triggered when the increase in the value of the VDC compared to the last ROC refresh exceeds the set threshold.
824 +90 (H): (0x90&0x10)=10(H)=000**1** 0000(B)  bit4=1, "TRUE", This uplink is triggered when the increase in the value of the VDC compared to the last ROC refresh exceeds the set threshold.
820 820  
821 821  20 (H): (0x20&0x10)=0  bit4=0, "FALSE", This uplink is not triggered when the increase in the value of the VDC compared to the last ROC refresh exceeds the set threshold.
822 822  
823 823  
824 -* IN1_pin_level & IN2_pin_level
829 +* (% style="color:#037691" %)**IN1_pin_level & IN2_pin_level**
825 825  
826 826  IN1 and IN2 are used as digital input pins.
827 827  
... ... @@ -830,15 +830,15 @@
830 830  80 (H): (0x09&0x04)=0    IN2 pin is low level.
831 831  
832 832  
833 -* Exti_pin_level &Exti_status
838 +* (% style="color:#037691" %)**Exti_pin_level &Exti_status**
834 834  
835 835  This data field shows whether the packet is generated by an interrupt pin.
836 836  
837 -Note: The Internet pin of the old motherboard is a separate pin in the screw terminal, and the interrupt pin of the new motherboard(SIB V1.3) is the GPIO_EXTI pin.
842 +Note: The Internet pin of the old motherboard is a separate pin in the screw terminal, and the interrupt pin of the new motherboard(SIB V1.3) is the **GPIO_EXTI** pin.
838 838  
839 -Exti_pin_level:  80 (H): (0x80&0x02)=0  "low", The level of the interrupt pin.
844 +**Exti_pin_level:**  80 (H): (0x80&0x02)=0  "low", The level of the interrupt pin.
840 840  
841 -Exti_status: 80 (H): (0x80&0x01)=0  "False", Normal uplink packet.
846 +**Exti_status: **80 (H): (0x80&0x01)=0  "False", Normal uplink packet.
842 842  
843 843  
844 844  === 2.8.2 Set the Report on Change ===
... ... @@ -849,61 +849,71 @@
849 849  
850 850  ==== 2.8.2.1 Wave alarm mode ====
851 851  
852 -
853 853  Feature: By setting the detection period and a change value, the IDC/VDC variable is monitored whether it exceeds the set change value. If this change value is exceeded, the ROC uplink is sent and the comparison value is flushed.
854 854  
855 -* Change value: The amount by which the next detection value increases/decreases relative to the previous detection value.
856 -* Comparison value: A parameter to compare with the latest ROC test.
859 +* (% style="color:#037691" %)**Change value: **(%%)The amount by which the next detection value increases/decreases relative to the previous detection value.
860 +* (% style="color:#037691" %)**Comparison value:**(%%) A parameter to compare with the latest ROC test.
857 857  
858 -AT Command: AT+ROC
862 +(% style="color:blue" %)**AT Command: AT+ROC**
859 859  
860 860  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
861 -|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)Command Example|=(% style="width: 154px; background-color: rgb(79, 129, 189); color: white;" %)Parameters|=(% style="width: 193px; background-color: rgb(79, 129, 189); color: white;" %)Response/Explanation
865 +|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 154px; background-color: rgb(79, 129, 189); color: white;" %)**Parameters**|=(% style="width: 197px; background-color: rgb(79, 129, 189); color: white;" %)**Response/Explanation**
862 862  |(% style="width:143px" %)AT+ROC=?|(% style="width:154px" %)Show current ROC setting|(% style="width:197px" %)(((
863 863  0,0,0,0(default)
864 864  OK
865 865  )))
866 866  |(% colspan="1" rowspan="4" style="width:143px" %)(((
871 +
872 +
873 +
874 +
867 867  AT+ROC=a,b,c,d
868 868  )))|(% style="width:154px" %)(((
869 -**a:** Enable or disable the ROC
877 +
878 +
879 +
880 +
881 +
882 +
883 +**a**: Enable or disable the ROC
870 870  )))|(% style="width:197px" %)(((
871 871  **0:** off
872 872  **1:** Turn on the wave alarm mode, send the ROC uplink when the increment exceeds the set parameter and refresh the comparison value.
873 -**2:** Turn on the wave alarm mode, send the ROC uplink when the increment exceeds the set parameter and refresh the comparison value. In addition, the comparison value is refreshed when the device sends packets ([[TDC>>||anchor="H3.3.1SetTransmitIntervalTime"]] or [[ACT>>||anchor="H1.7Button26LEDs"]]).
887 +
888 +**2: **Turn on the wave alarm mode, send the ROC uplink when the increment exceeds the set parameter and refresh the comparison value. In addition, the comparison value is refreshed when the device sends packets ([[TDC>>||anchor="H3.3.1SetTransmitIntervalTime"]] or [[ACT>>||anchor="H1.7Button26LEDs"]]).
874 874  )))
875 -|(% style="width:154px" %)**b:** Set the detection interval|(% style="width:197px" %)(((
890 +|(% style="width:154px" %)**b**: Set the detection interval|(% style="width:197px" %)(((
876 876  Range:  0~~65535s
877 877  )))
878 -|(% style="width:154px" %)**c:** Setting the IDC change value|(% style="width:197px" %)Unit: uA
879 -|(% style="width:154px" %)**d:** Setting the VDC change value|(% style="width:197px" %)Unit: mV
893 +|(% style="width:154px" %)**c**: Setting the IDC change value|(% style="width:197px" %)Unit: uA
894 +|(% style="width:154px" %)**d**: Setting the VDC change value|(% style="width:197px" %)Unit: mV
880 880  
881 -Example:
896 +**Example:**
882 882  
883 -* AT+ROC=0,0,0,0  ~/~/ The ROC function is not used.
898 +* AT+ROC=0,0,0,0  ~/~/The ROC function is not used.
884 884  * AT+ROC=1,60,3000, 500  ~/~/ Check value every 60 seconds. lf there is change in IDC (>3mA) or VDC (>500mV), sends an ROC uplink, and the comparison value is refreshed.
885 885  * AT+ROC=1,60,3000,0  ~/~/ Check value every 60 seconds. lf there is change in IDC (>3mA), send an ROC uplink and the comparison value of IDC is refreshed. dd=0 Means doesn't monitor Voltage.
886 886  * AT+ROC=2,60,3000,0  ~/~/ Check value every 60 seconds. lf there is change in IDC (>3mA), send an ROC uplink and the comparison value of IDC is refreshed. dd=0 Means doesn't monitor Voltage. In addition, if the change in the IDC does not exceed 3mA, then the ROC uplink is not sent, and the comparison value is not refreshed by the ROC uplink packet. However, if the device TDC time arrives, or if the user manually sends packets, then the IDC comparison value is also refreshed.
887 887  
888 -Downlink Command: 0x09 aa bb cc dd
903 +(% style="color:blue" %)**Downlink Command: 0x09 aa bb cc dd**
889 889  
890 890  Format: Function code (0x09) followed by 4 bytes.
891 891  
892 -aa: 1 byte; Set the wave alarm mode.
907 +(% style="color:blue" %)**aa: **(% style="color:#037691" %)**1 byte;**(%%) Set the wave alarm mode.
893 893  
894 -bb: 2 bytes; Set the detection interval. (second)
909 +(% style="color:blue" %)**bb: **(% style="color:#037691" %)**2 bytes;**(%%) Set the detection interval. (second)
895 895  
896 -cc: 2 bytes; Setting the IDC change threshold. (uA)
911 +(% style="color:blue" %)**cc: **(% style="color:#037691" %)**2 bytes;**(%%) Setting the IDC change threshold. (uA)
897 897  
898 -dd: 2 bytes; Setting the VDC change threshold. (mV)
913 +(% style="color:blue" %)**dd: **(% style="color:#037691" %)**2 bytes;**(%%) Setting the VDC change threshold. (mV)
899 899  
900 -Example:
915 +**Example:**
901 901  
902 -* Downlink Payload: 09 01 00 3C 0B B8 01 F4  ~/~/ Equal to AT+ROC=1,60,3000, 500
903 -* Downlink Payload: 09 01 00 3C 0B B8 00 00  ~/~/ Equal to AT+ROC=1,60,3000,0
904 -* Downlink Payload: 09 02 00 3C 0B B8 00 00  ~/~/ Equal to AT+ROC=2,60,3000,0
917 +* Downlink Payload: **09 01 00 3C 0B B8 01 F4 ** ~/~/Equal to AT+ROC=1,60,3000, 500
918 +* Downlink Payload: **09 01 00 3C 0B B8 00 00 ** ~/~/Equal to AT+ROC=1,60,3000,0
919 +* Downlink Payload: **09 02 00 3C 0B B8 00 00 ** ~/~/Equal to AT+ROC=2,60,3000,0
905 905  
906 -Screenshot of parsing example in TTN:
921 +(% style="color:blue" %)**Screenshot of parsing example in TTN:**
907 907  
908 908  * AT+ROC=1,60,3000, 500.
909 909  
... ... @@ -912,67 +912,72 @@
912 912  
913 913  ==== 2.8.2.2 Over-threshold alarm mode ====
914 914  
915 -
916 916  Feature: Monitors whether the IDC/VDC exceeds the threshold by setting the detection period and threshold. Alarm if the threshold is exceeded.
917 917  
918 -AT Command: AT+ROC=3,a,b,c,d,e
932 +(% style="color:blue" %)**AT Command: AT+ROC=3,a,b,c,d,e**
919 919  
920 920  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
921 -|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)Command Example|=(% style="width: 160px; background-color: rgb(79, 129, 189); color: white;" %)Parameters|=(% style="width: 187px; background-color: rgb(79, 129, 189); color: white;" %)Response/Explanation
935 +|=(% style="width: 163px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 160px; background-color: rgb(79, 129, 189); color: white;" %)**Parameters**|=(% style="width: 185px; background-color: rgb(79, 129, 189); color: white;" %)**Response/Explanation**
922 922  |(% style="width:143px" %)AT+ROC=?|(% style="width:160px" %)Show current ROC setting|(% style="width:185px" %)(((
923 923  0,0,0,0(default)
924 924  OK
925 925  )))
926 926  |(% colspan="1" rowspan="5" style="width:143px" %)(((
927 -AT+ROC=3,a,b,c,d,e
941 +
942 +
943 +
944 +
945 +AT+ROC=(% style="color:blue" %)**3**(%%),a,b,c,d,e
928 928  )))|(% style="width:160px" %)(((
929 -**a:** Set the detection interval
947 +**a: **Set the detection interval
930 930  )))|(% style="width:185px" %)(((
931 931  Range:  0~~65535s
932 932  )))
933 -|(% style="width:160px" %)**b:** Set the IDC alarm trigger condition|(% style="width:185px" %)(((
951 +|(% style="width:160px" %)**b**: Set the IDC alarm trigger condition|(% style="width:185px" %)(((
934 934  **0:** Less than the set IDC threshold, Alarm
953 +
935 935  **1:** Greater than the set IDC threshold, Alarm
936 936  )))
937 937  |(% style="width:160px" %)(((
938 -**c: ** IDC alarm threshold
957 +**c**:  IDC alarm threshold
939 939  )))|(% style="width:185px" %)(((
940 940  Unit: uA
941 941  )))
942 -|(% style="width:160px" %)**d:** Set the VDC alarm trigger condition|(% style="width:185px" %)(((
961 +|(% style="width:160px" %)**d**: Set the VDC alarm trigger condition|(% style="width:185px" %)(((
943 943  **0:** Less than the set VDC threshold, Alarm
963 +
944 944  **1:** Greater than the set VDC threshold, Alarm
945 945  )))
946 946  |(% style="width:160px" %)**e:** VDC alarm threshold|(% style="width:185px" %)Unit: mV
947 947  
948 -Example:
968 +**Example:**
949 949  
950 -* AT+ROC=3,60,0,3000,0,5000  ~/~/ The data is checked every 60 seconds. If the IDC is less than 3mA or the VDC is less than 5000mV, an alarm is generated.
951 -* AT+ROC=3,180,1,3000,1,5000  ~/~/ The data is checked every 180 seconds. If the IDC is greater than 3mA or the VDC is greater than 5000mV, an alarm is generated.
952 -* AT+ROC=3,300,0,3000,1,5000  ~/~/ The data is checked every 300 seconds. If the IDC is less than 3mA or the VDC is greater than 5000mV, an alarm is generated.
970 +* AT+ROC=3,60,0,3000,0,5000  ~/~/The data is checked every 60 seconds. If the IDC is less than 3mA or the VDC is less than 5000mV, an alarm is generated.
971 +* AT+ROC=3,180,1,3000,1,5000  ~/~/The data is checked every 180 seconds. If the IDC is greater than 3mA or the VDC is greater than 5000mV, an alarm is generated.
972 +* AT+ROC=3,300,0,3000,1,5000  ~/~/The data is checked every 300 seconds. If the IDC is less than 3mA or the VDC is greater than 5000mV, an alarm is generated.
953 953  
954 -Downlink Command: 0x09 03 aa bb cc dd ee
974 +(% style="color:blue" %)**Downlink Command: 0x09 03 aa bb cc dd ee**
955 955  
956 956  Format: Function code (0x09) followed by 03 and the remaining 5 bytes.
957 957  
958 -aa: 2 bytes; Set the detection interval.(second)
978 +(% style="color:blue" %)**aa: **(% style="color:#037691" %)**2 bytes;**(%%) Set the detection interval.(second)
959 959  
960 -bb: 1 byte; Set the IDC alarm trigger condition.
980 +(% style="color:blue" %)**bb: **(% style="color:#037691" %)**1 byte; **(%%)Set the IDC alarm trigger condition.
961 961  
962 -cc: 2 bytes; IDC alarm threshold.(uA)
982 +(% style="color:blue" %)**cc: **(% style="color:#037691" %)**2 bytes;**(%%) IDC alarm threshold.(uA)
963 963  
964 964  
965 -dd: 1 byte; Set the VDC alarm trigger condition.
985 +(% style="color:blue" %)**dd: **(% style="color:#037691" %)**1 byte;**(%%) Set the VDC alarm trigger condition.
966 966  
967 -ee: 2 bytes; VDC alarm threshold.(mV)
987 +(% style="color:blue" %)**ee: **(% style="color:#037691" %)**2 bytes; **(%%)VDC alarm threshold.(mV)
968 968  
969 -Example:
989 +**Example:**
970 970  
971 -* Downlink Payload: 09 03 00 3C 00 0B B8 00 13 38 ~/~/ Equal to AT+ROC=3,60,0,3000,0,5000
972 -* Downlink Payload: 09 03 00 b4 01 0B B8 01 13 38  ~/~/ Equal to AT+ROC=3,60,1,3000,1,5000
973 -* Downlink Payload: 09 03 01 2C 00 0B B8 01 13 38  ~/~/ Equal to AT+ROC=3,60,0,3000,1,5000
991 +* Downlink Payload: **09 03 00 3C 00 0B B8 00 13 38** ~/~/Equal to AT+ROC=3,60,0,3000,0,5000
992 +* Downlink Payload: **09 03 00 b4 01 0B B8 01 13 38**  ~/~/Equal to AT+ROC=3,60,1,3000,1,5000
993 +* Downlink Payload: **09 03 01 2C 00 0B B8 01 13 38**  ~/~/Equal to AT+ROC=3,60,0,3000,1,5000
974 974  
975 -Screenshot of parsing example in TTN:
995 +(% style="color:blue" %)**Screenshot of parsing example in TTN:**
976 976  
977 977  * AT+ROC=3,60,0,3000,0,5000
978 978  
... ... @@ -982,7 +982,7 @@
982 982  == 2.9 ​Firmware Change Log ==
983 983  
984 984  
985 -Firmware download link:
1005 +**Firmware download link:**
986 986  
987 987  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
988 988  
... ... @@ -994,7 +994,7 @@
994 994  
995 995  PS-LB/LS supports below configure method:
996 996  
997 -* AT Command via Bluetooth Connection (Recommand Way): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
1017 +* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
998 998  * AT Command via UART Connection : See [[FAQ>>||anchor="H6.FAQ"]].
999 999  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
1000 1000  
... ... @@ -1022,10 +1022,10 @@
1022 1022  
1023 1023  Feature: Change LoRaWAN End Node Transmit Interval.
1024 1024  
1025 -AT Command: AT+TDC
1045 +(% style="color:blue" %)**AT Command: AT+TDC**
1026 1026  
1027 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1028 -|=(% style="width: 160px; background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 160px; background-color:#4F81BD;color:white" %)Function|=(% style="width: 190px;background-color:#4F81BD;color:white" %)Response
1047 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1048 +|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 190px;background-color:#4F81BD;color:white" %)**Response**
1029 1029  |(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=?|(% style="background-color:#f2f2f2; width:166px" %)Show current transmit Interval|(% style="background-color:#f2f2f2" %)(((
1030 1030  30000
1031 1031  OK
... ... @@ -1036,7 +1036,7 @@
1036 1036  Set transmit interval to 60000ms = 60 seconds
1037 1037  )))
1038 1038  
1039 -Downlink Command: 0x01
1059 +(% style="color:blue" %)**Downlink Command: 0x01**
1040 1040  
1041 1041  Format: Command Code (0x01) followed by 3 bytes time value.
1042 1042  
... ... @@ -1050,10 +1050,10 @@
1050 1050  
1051 1051  Feature, Set Interrupt mode for GPIO_EXIT.
1052 1052  
1053 -AT Command: AT+INTMOD
1073 +(% style="color:blue" %)**AT Command: AT+INTMOD**
1054 1054  
1055 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1056 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 196px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 160px;background-color:#4F81BD;color:white" %)Response
1075 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1076 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Response**
1057 1057  |(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=?|(% style="background-color:#f2f2f2; width:196px" %)Show current interrupt mode|(% style="background-color:#f2f2f2; width:157px" %)(((
1058 1058  0
1059 1059  OK
... ... @@ -1067,7 +1067,7 @@
1067 1067  3. (Trigger by rising edge)
1068 1068  )))|(% style="background-color:#f2f2f2; width:157px" %)OK
1069 1069  
1070 -Downlink Command: 0x06
1090 +(% style="color:blue" %)**Downlink Command: 0x06**
1071 1071  
1072 1072  Format: Command Code (0x06) followed by 3 bytes.
1073 1073  
... ... @@ -1081,10 +1081,10 @@
1081 1081  
1082 1082  Feature, Control the output 3V3 , 5V or 12V.
1083 1083  
1084 -AT Command: AT+3V3T
1104 +(% style="color:blue" %)**AT Command: AT+3V3T**
1085 1085  
1086 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:474px" %)
1087 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 201px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 119px;background-color:#4F81BD;color:white" %)Response
1106 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:474px" %)
1107 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 201px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 119px;background-color:#4F81BD;color:white" %)**Response**
1088 1088  |(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=?|(% style="background-color:#f2f2f2; width:201px" %)Show 3V3 open time.|(% style="background-color:#f2f2f2; width:116px" %)(((
1089 1089  0
1090 1090  OK
... ... @@ -1100,10 +1100,10 @@
1100 1100  OK
1101 1101  )))
1102 1102  
1103 -AT Command: AT+5VT
1123 +(% style="color:blue" %)**AT Command: AT+5VT**
1104 1104  
1105 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:470px" %)
1106 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 196px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 119px;background-color:#4F81BD;color:white" %)Response
1125 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:470px" %)
1126 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 119px;background-color:#4F81BD;color:white" %)**Response**
1107 1107  |(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=?|(% style="background-color:#f2f2f2; width:196px" %)Show 5V open time.|(% style="background-color:#f2f2f2; width:114px" %)(((
1108 1108  0
1109 1109  OK
... ... @@ -1119,10 +1119,10 @@
1119 1119  OK
1120 1120  )))
1121 1121  
1122 -AT Command: AT+12VT
1142 +(% style="color:blue" %)**AT Command: AT+12VT**
1123 1123  
1124 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:443px" %)
1125 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)Command Example|=(% style="width: 199px;background-color:#4F81BD;color:white" %)Function|=(% style="width: 88px;background-color:#4F81BD;color:white" %)Response
1144 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:443px" %)
1145 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 199px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 88px;background-color:#4F81BD;color:white" %)**Response**
1126 1126  |(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=?|(% style="background-color:#f2f2f2; width:199px" %)Show 12V open time.|(% style="background-color:#f2f2f2; width:83px" %)(((
1127 1127  0
1128 1128  OK
... ... @@ -1132,28 +1132,28 @@
1132 1132  OK
1133 1133  )))
1134 1134  
1135 -Downlink Command: 0x07
1155 +(% style="color:blue" %)**Downlink Command: 0x07**
1136 1136  
1137 1137  Format: Command Code (0x07) followed by 3 bytes.
1138 1138  
1139 1139  The first byte is which power, the second and third bytes are the time to turn on.
1140 1140  
1141 -* Example 1: Downlink Payload: 070101F4  ~-~-->  AT+3V3T=500
1142 -* Example 2: Downlink Payload: 0701FFFF   ~-~-->  AT+3V3T=65535
1143 -* Example 3: Downlink Payload: 070203E8  ~-~-->  AT+5VT=1000
1144 -* Example 4: Downlink Payload: 07020000  ~-~-->  AT+5VT=0
1145 -* Example 5: Downlink Payload: 070301F4  ~-~-->  AT+12VT=500
1146 -* Example 6: Downlink Payload: 07030000  ~-~-->  AT+12VT=0
1161 +* Example 1: Downlink Payload: 070101F4  **~-~-->**  AT+3V3T=500
1162 +* Example 2: Downlink Payload: 0701FFFF   **~-~-->**  AT+3V3T=65535
1163 +* Example 3: Downlink Payload: 070203E8  **~-~-->**  AT+5VT=1000
1164 +* Example 4: Downlink Payload: 07020000  **~-~-->**  AT+5VT=0
1165 +* Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
1166 +* Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
1147 1147  
1148 -Note: Before v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 65535 milliseconds. After v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 180 seconds.
1168 +(% style="color:red" %)**Note: Before v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 65535 milliseconds. After v1.2, the maximum settable time of 3V3T, 5VT and 12VT is 180 seconds.**
1149 1149  
1150 -Therefore, the corresponding downlink command is increased by one byte to five bytes.
1170 +(% style="color:red" %)**Therefore, the corresponding downlink command is increased by one byte to five bytes.**
1151 1151  
1152 -Example:
1172 +**Example: **
1153 1153  
1154 -* 120s=120000ms(D) =0x01D4C0(H), Downlink Payload: 07 01 01 D4 C0  ~-~-->  AT+3V3T=120000
1155 -* 100s=100000ms(D) =0x0186A0(H), Downlink Payload: 07 02 01 86 A0  ~-~-->  AT+5VT=100000
1156 -* 80s=80000ms(D) =0x013880(H), Downlink Payload: 07 03 01 38 80  ~-~-->  AT+12VT=80000
1174 +* 120s=120000ms(D) =0x01D4C0(H), Downlink Payload: 07 **01** 01 D4 C0  **~-~-->**  AT+3V3T=120000
1175 +* 100s=100000ms(D) =0x0186A0(H), Downlink Payload: 07 **02** 01 86 A0  **~-~-->**  AT+5VT=100000
1176 +* 80s=80000ms(D) =0x013880(H), Downlink Payload: 07 **03** 01 38 80  **~-~-->**  AT+12VT=80000
1157 1157  
1158 1158  === 3.3.4 Set the Probe Model ===
1159 1159  
... ... @@ -1160,7 +1160,7 @@
1160 1160  
1161 1161  Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
1162 1162  
1163 -AT Command: AT +PROBE
1183 +(% style="color:blue" %)**AT Command: AT** **+PROBE**
1164 1164  
1165 1165  AT+PROBE=aabb
1166 1166  
... ... @@ -1179,7 +1179,7 @@
1179 1179  (0~~100Pa->01,0~~200Pa->02,0~~300Pa->03,0~~1KPa->04,0~~2KPa->05,0~~3KPa->06,0~~4KPa->07,0~~5KPa->08,0~~10KPa->09,-100~~ 100Pa->0A,-200~~ 200Pa->0B,-1~~ 1KPa->0C)
1180 1180  
1181 1181  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1182 -|(% style="background-color:#4f81bd; color:white; width:154px" %)Command Example|(% style="background-color:#4f81bd; color:white; width:269px" %)Function|(% style="background-color:#4f81bd; color:white" %)Response
1202 +|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Function**|(% style="background-color:#4f81bd; color:white" %)**Response**
1183 1183  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=?|(% style="background-color:#f2f2f2; width:269px" %)Get or Set the probe model.|(% style="background-color:#f2f2f2" %)0
1184 1184  OK
1185 1185  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0003|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 3m type.|(% style="background-color:#f2f2f2" %)OK
... ... @@ -1190,12 +1190,12 @@
1190 1190  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0101|(% style="background-color:#f2f2f2; width:269px" %)Set pressure transmitters mode, first type(A).|(% style="background-color:#f2f2f2" %)OK
1191 1191  |(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0000|(% style="background-color:#f2f2f2; width:269px" %)Initial state, no settings.|(% style="background-color:#f2f2f2" %)OK
1192 1192  
1193 -Downlink Command: 0x08
1213 +(% style="color:blue" %)**Downlink Command: 0x08**
1194 1194  
1195 1195  Format: Command Code (0x08) followed by 2 bytes.
1196 1196  
1197 -* Example 1: Downlink Payload: 080003  ~-~-->  AT+PROBE=0003
1198 -* Example 2: Downlink Payload: 080101  ~-~-->  AT+PROBE=0101
1217 +* Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
1218 +* Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
1199 1199  
1200 1200  === 3.3.5 Multiple collections are one uplink (Since firmware V1.1) ===
1201 1201  
... ... @@ -1202,41 +1202,41 @@
1202 1202  
1203 1203  Added AT+STDC command to collect the voltage of VDC_INPUT/IDC_INPUT multiple times and upload it at one time.
1204 1204  
1205 -AT Command: AT +STDC
1225 +(% style="color:blue" %)**AT Command: AT** **+STDC**
1206 1206  
1207 1207  AT+STDC=aa,bb,bb
1208 1208  
1209 -aa:
1210 -0: means disable this function and use TDC to send packets.
1211 -1: means that the function is enabled to send packets by collecting VDC data for multiple times.
1212 -2: means that the function is enabled to send packets by collecting IDC data for multiple times.
1213 -bb: Each collection interval (s), the value is 1~~65535
1214 -cc: the number of collection times, the value is 1~~120
1229 +(% style="color:#037691" %)**aa:**(%%)
1230 +**0:** means disable this function and use TDC to send packets.
1231 +**1:** means that the function is enabled to send packets by collecting VDC data for multiple times.
1232 +**2:** means that the function is enabled to send packets by collecting IDC data for multiple times.
1233 +(% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
1234 +(% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
1215 1215  
1216 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1217 -|(% style="background-color:#4f81bd; color:white; width:160px" %)Command Example|(% style="background-color:#4f81bd; color:white; width:215px" %)Function|(% style="background-color:#4f81bd; color:white" %)Response
1236 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1237 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white" %)**Response**
1218 1218  |(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=?|(% style="background-color:#f2f2f2; width:215px" %)Get the mode of multiple acquisitions and one uplink.|(% style="background-color:#f2f2f2" %)1,10,18
1219 1219  OK
1220 1220  |(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=1,10,18|(% style="background-color:#f2f2f2; width:215px" %)Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(% style="background-color:#f2f2f2" %)(((
1221 1221  Attention:Take effect after ATZ
1242 +
1222 1222  OK
1223 1223  )))
1224 1224  |(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=0, 0,0|(% style="background-color:#f2f2f2; width:215px" %)(((
1225 -
1226 -
1227 1227  Use the TDC interval to send packets.(default)
1228 1228  
1229 1229  
1230 1230  )))|(% style="background-color:#f2f2f2" %)(((
1231 1231  Attention:Take effect after ATZ
1251 +
1232 1232  OK
1233 1233  )))
1234 1234  
1235 -Downlink Command: 0xAE
1255 +(% style="color:blue" %)**Downlink Command: 0xAE**
1236 1236  
1237 1237  Format: Command Code (0xAE) followed by 4 bytes.
1238 1238  
1239 -* Example 1: Downlink Payload: AE 01 02 58 12 ~-~-->  AT+STDC=1,600,18
1259 +* Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
1240 1240  
1241 1241  = 4. Battery & Power Consumption =
1242 1242  
... ... @@ -1243,7 +1243,7 @@
1243 1243  
1244 1244  PS-LB use ER26500 + SPC1520 battery pack and PS-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1245 1245  
1246 -[[Battery Info & Power Consumption Analyze>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1266 +[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1247 1247  
1248 1248  
1249 1249  = 5. OTA firmware update =
... ... @@ -1279,22 +1279,22 @@
1279 1279  Test the current values at the depth of different liquids and convert them to a linear scale.
1280 1280  Replace its ratio with the ratio of water to current in the decoder.
1281 1281  
1282 -Example:
1302 +**Example:**
1283 1283  
1284 1284  Measure the corresponding current of the sensor when the liquid depth is 2.04m and 0.51m.
1285 1285  
1286 -Calculate scale factor:
1306 +**Calculate scale factor：**
1287 1287  Use these two data to calculate the current and depth scaling factors：(7.888-5.035)/(2.04-0.51)=1.86470588235294
1288 1288  
1289 -Calculation formula:
1309 +**Calculation formula：**
1290 1290  
1291 1291  Use the calibration formula：(Current current - Minimum calibration current)/Scale factor + Minimum actual calibration height
1292 1292  
1293 -Actual calculations:
1313 +**Actual calculations：**
1294 1294  
1295 1295  Use this formula to calculate the value corresponding to the current at a depth of 1.5 meters: (6.918-5.035)/1.86470588235294+0.51=1.519810726
1296 1296  
1297 -Error:
1317 +**Error：**
1298 1298  
1299 1299  0.009810726
1300 1300  
... ... @@ -1301,7 +1301,6 @@
1301 1301  
1302 1302  [[image:image-20240329175044-1.png]]
1303 1303  
1304 -
1305 1305  = 7. Troubleshooting =
1306 1306  
1307 1307  == 7.1 Water Depth Always shows 0 in payload ==
... ... @@ -1318,42 +1318,19 @@
1318 1318  
1319 1319  = 8. Order Info =
1320 1320  
1321 -== 8.1 Thread Installation Type & Immersion Type Pressure Sensor ==
1322 1322  
1341 +(% style="display:none" %)
1323 1323  
1324 -Part Number: (% style="color:blue" %)**PS-NB/NS-Txx-YY  or  PS-NB/NS-Ixx-YY**
1325 -
1326 -(% style="color:blue" %)**XX:**(%%)** Pressure Range and Thread Type **
1327 -
1328 -(% style="color:blue" %)**YY:**(%%)** The default frequency band**
1329 -
1330 -* YY: Frequency Bands, options: EU433,CN470,EU868,IN865,KR920,AS923,AU915,US915
1331 -
1332 1332  [[image:image-20241021093209-1.png]]
1333 1333  
1334 -
1335 -== 8.2 Wireless Differential Air Pressure Sensor ==
1336 -
1337 -
1338 -Part Number: (% style="color:blue" %)**PS-LB-Dxx-YY  or  PS-LS-Dxx-YY **
1339 -
1340 -(% style="color:blue" %)**XX:**(%%)** Differential Pressure Range**
1341 -
1342 -(% style="color:blue" %)**YY:**(%%)** The default frequency band**
1343 -
1344 -* YY: Frequency Bands, options: EU433,CN470,EU868,IN865,KR920,AS923,AU915,US915
1345 -
1346 -[[image:image-20250401174215-1.png||height="486" width="656"]]
1347 -
1348 -
1349 1349  = 9. ​Packing Info =
1350 1350  
1351 1351  
1352 -Package Includes:
1348 +(% style="color:#037691" %)**Package Includes**:
1353 1353  
1354 -* PS-LB/LS-Txx/Ixx, PS-LB/LS-Dxx   LoRaWAN Pressure Sensor
1350 +* PS-LB or PS-LS LoRaWAN Pressure Sensor
1355 1355  
1356 -Dimension and weight:
1352 +(% style="color:#037691" %)**Dimension and weight**:
1357 1357  
1358 1358  * Device Size: cm
1359 1359  * Device Weight: g
image-20250401174215-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.3 KB
Content
image-20250419092225-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.6 KB
Content
image-20250419162538-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -90.3 KB
Content