Skip to Content
Last modified by BoYang Xie on 2025/07/24 16:47
From version 4.8
edited by Edwin Chen
on 2024/09/16 09:00
Change comment: There is no comment for this version
To version 115.1
edited by Xiaoling
on 2024/12/17 17:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,9 +1,14 @@
1 -
1 +(% style="text-align:center" %)
2 2  [[image:image-20240915231842-1.png]]
3 3  
4 4  
5 +
6 +
7 +
8 +
9 +
5 5  (% _mstvisible="1" %)
6 -(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
11 +(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents:**
7 7  
8 8  {{toc/}}
9 9  
... ... @@ -18,11 +18,12 @@
18 18  
19 19  == 1.1  What is LTS5 LoRa HMI touch screen ==
20 20  
21 -LTS5 is a (% style="color:blue" %)LoRa / LoRaWAN HMI Touch Screen(%%) designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.
22 22  
27 +LTS5 is a (% style="color:blue" %)**LoRa / LoRaWAN HMI Touch Screen**(%%) designed for display purpose of IoT project. It have a **5.0" HMI touch screen**, and **support WiFi, Bluetooch, LoRa wireless protocol**.
28 +
23 23  LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.
24 24  
25 -The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the display UI for different application.
31 +The HMI touch screen of LTS5 **supports drap & drop design**. Developer can use SquareLine to easily customize the display UI for different application.
26 26  
27 27  LTS5 use LA66 LoRa module, this module can be program to support private LoRa protocol or LoRaWAN protocol.
28 28  
... ... @@ -29,7 +29,9 @@
29 29  
30 30  == 1.2  Features ==
31 31  
32 -* ESP32-WROOM MCU + Dragino LA66 LoRa Module
38 +
39 +* ESP32-WROOM MCU: 8MB RAM & 16MB ROM
40 +* Dragino LA66 LoRa Module
33 33  * Support Private LoRa protocol or LoRaWAN protocol
34 34  * Support WiFi & BLE wireless protocol
35 35  * 5.0" HMI touch screen
... ... @@ -40,9 +40,18 @@
40 40  * 5V DC power
41 41  * IP Rating: IP52
42 42  
43 -
44 44  == 1.3  Specification ==
45 45  
53 +
54 +**LoRa**:
55 +
56 +* Frequency Range: 870 MHz ~~ 960 MHz
57 +* TCXO crystal to ensure RF performance on low temperature
58 +* Maximum Power +22 dBm constant RF output
59 +* High sensitivity: -148 dBm
60 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
61 +* LoRa Rx current: <9 mA
62 +
46 46  **WiFi:**
47 47  
48 48  * 802.11b/g/n
... ... @@ -56,20 +56,18 @@
56 56  * Bluetooth V4.2 BR/EDR and Bluetooth LE standard
57 57  * Class-1, Class-2, and Class-3 transmitters.
58 58  * AFH
59 -*
60 60  * CVSD and SBC
61 61  
62 62  **Display:**
63 63  
64 -* TFT Touch SCreen
65 -* Accuracy Tolerance: Typ ±0.2 °C
66 -* Long Term Drift: < 0.03 °C/yr
67 -* Operating Range: -10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
80 +* 5.0 Inch , 800 x 480
81 +* IPS Capacitive Touch SCreen
82 +* RGB color.
83 +* Display Area: 120.7*75.80 mm
68 68  
69 -
70 -
71 71  == 1.4  Power Consumption ==
72 72  
87 +
73 73  * External 5V DC power adapter
74 74  
75 75  
... ... @@ -76,7 +76,8 @@
76 76  == 1.5  Storage & Operation Temperature ==
77 77  
78 78  
79 --10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
94 +* Operation Temperature: -20 ~~ 70°C  (No Dew)
95 +* Storage Temperature: -30 ~~ 70°C  (No Dew)
80 80  
81 81  
82 82  == 1.6  Applications ==
... ... @@ -90,721 +90,439 @@
90 90  * Smart Factory
91 91  
92 92  
93 -= 2.  Operation Mode =
109 += 2.  Getting Started with Hello World =
94 94  
95 -== 2.1  How it work? ==
111 +== 2.1  About this demo ==
96 96  
97 97  
98 -Each PB01 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use PB01 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if PB01 is under this LoRaWAN network coverage, PB01 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.
114 +In this Getting Started Example, we will show how to design a simple Display UI and upload it to LTS5. This UI has  a button , when user click the button. The Web UI will jump to a new page.
99 99  
100 100  
101 -== 2.2  How to Activate PB01? ==
117 +== 2.2  Install Software Running Environment ==
102 102  
103 103  
104 -(% style="color:red" %)** 1.  Open enclosure from below position.**
120 +The ESP MCU can be developed using ESP-IDF, Arduino, or MicroPython. For this project, we utilize ESP-IDF for compilation and Visual Studio Code (VSCode) for editing.
105 105  
106 -[[image:image-20220621093835-1.png]]
107 107  
123 +=== 2.2.1 Install VSCode and ESP-IDF extension ===
108 108  
109 -(% style="color:red" %)** 2.  Insert 2 x AAA LR03 batteries and the node is activated.**
110 110  
111 -[[image:image-20220621093835-2.png]]
126 +Firstly, download and install VSCode for your computer's operating system from the official website: [[Download Visual Studio Code - Mac, Linux, Windows>>url:https://code.visualstudio.com/download]].
112 112  
128 +Next, you need to install the ESP-IDF extension within VSCode. The detailed operation steps are illustrated in image 1.
113 113  
114 -(% style="color:red" %)** 3. Under the above conditions, users can also reactivate the node by long pressing the ACT button.**
130 +[[image:image-20240928110211-5.png||height="508" width="866"]]
115 115  
116 -[[image:image-20220621093835-3.png]]
132 + image 1 ESP-IDF extension install
117 117  
134 +Links for reference: [[Install ESP32 ESP-IDF on Windows and Integrate with VS code (esp32tutorials.com)>>url:https://esp32tutorials.com/install-esp32-esp-idf-windows-integrate-vs-code/#:~~:text=In%20this%20tutorial,%20we%20will%20show%20you%20how%20to%20install]]
118 118  
119 -User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of PB01.
120 120  
137 +=== 2.2.2 Install SquareLine Studio ===
121 121  
122 -== 2.3  Example to join LoRaWAN network ==
123 123  
140 +The version we are utilizing for this software is 1.4.2. You can download it from the official link: [[SquareLine Studio - Download the current version of SquareLine Studio>>url:https://squareline.io/downloads#lastRelease]].
124 124  
125 -This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
142 +Please note that this software necessitates the registration of a license prior to usage, and various licenses come with distinct limitations. For instance, the free version imposes restrictions such as a limit of 1 component, 150 widgets, and 10 screens. However, for first-time downloads, you are granted unrestricted access for a period of 30 days without the need for immediate registration.
126 126  
127 -(% _mstvisible="1" class="wikigeneratedid" %)
128 -Assume the LPS8v2 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the PB01 device in TTN V3 portal. 
129 129  
130 -[[image:image-20240705094824-4.png]]
145 +== 2.3 Simple usage of SquareLine Studio and export UI code ==
131 131  
132 -(% style="color:blue" %)**Step 1**(%%):  Create a device in TTN V3 with the OTAA keys from PB01.
133 133  
134 -Each PB01 is shipped with a sticker with the default DEV EUI as below:
148 +After launching and logging in to this software, create a project as shown in the following image 2. The version of LVGL is 8.3.11.
135 135  
136 -[[image:image-20230426083617-1.png||height="294" width="633"]]
150 +[[image:image-20240928103357-2.png||height="680" width="708"]]
137 137  
152 + image 2 create a SquareLine project
138 138  
139 -Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:
154 +Next, we need to make some settings for this project. By clicking in the specified order on image 3, we can see the page as shown in image 4.
140 140  
141 -Create application.
156 +[[image:1727229582471-566.png]]
142 142  
143 -choose to create the device manually.
158 + image 3 project settings
144 144  
145 -Add JoinEUI(AppEUI), DevEUI, AppKey.(% style="display:none" %)
160 +[[image:image-20240928105309-4.png||height="526" width="556"]]
146 146  
147 -[[image:image-20240507142116-1.png||height="410" width="1138"]](% style="display:none" %) (%%)
148 -
162 + image 4 modify project settings
149 149  
150 -[[image:image-20240507142157-2.png||height="559" width="1147"]]
164 +Now we can start to use this software. Here are some usage information for this software.
151 151  
152 -[[image:image-20240507142401-3.png||height="693" width="1202"]]
166 +**~1. add widget**
153 153  
154 -[[image:image-20240507142651-4.png||height="760" width="1190"]]
168 +To add a widget, you should click a widget you want to add at the area entitled “Widgets”. In image , demonstrate a add process of label, button, and image 5.
155 155  
156 -**Default mode OTAA**(% style="display:none" %)
170 +[[image:image-20240928111412-6.png||height="526" width="864"]]
157 157  
172 + image 5 add widgets
158 158  
159 -(% style="color:blue" %)**Step 2**(%%):  Use ACT button to activate PB01 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
174 +**2. modify widget**
160 160  
161 -[[image:image-20240507143104-5.png||height="434" width="1398"]]
176 +The area for modifying widgets is called "Inspector". There are four parts in the "Inspector" tab. We use three of them more frequently, excluding "COMPONENT". The second part is aimed at adjusting the layout, size, position, alignment, flags, and states, etc. of widgets. The name of the second part indicates the type of widget it is representing, and in image 6, it is "BUTTON".
162 162  
178 +[[image:1727485118799-984.png]]
163 163  
164 -== 2.4  Uplink Payload ==
180 + image 6 the button widget's "Inspector" tab
165 165  
182 +Second part: "Layout" means a auto position-management for widgets contained in the parent widget. "Transform" includes size, position and align modification.
166 166  
167 -Uplink payloads include two types: Valid Sensor Value and other status / control command.
184 +[[image:1727485251053-655.png]]
168 168  
169 -* Valid Sensor Value: Use FPORT=2
170 -* Other control command: Use FPORT other than 2.
186 +image 7 the button widget's "BUTTON" tab
171 171  
172 -=== 2.4.1  Uplink FPORT~=5, Device Status ===
188 +Third part: It is an area of style setting.
173 173  
190 +Fourth part: It is an area for adding events. In image 8, it is adding a click event to a button. If the button is clicked after the click event is added as shown in image 8, the current screen will fade into another specified screen, and the switching process will last 500ms.
174 174  
175 -Users can  get the Device Status uplink through the downlink command:
192 +[[image:1727485480434-713.png||height="395" width="290"]]
176 176  
177 -(% style="color:#4472c4" %)**Downlink:  **(%%)**0x2601**
194 + image 8 add event for button
178 178  
179 -Uplink the device configures with FPORT=5.
196 +**3. change label widget content**
180 180  
181 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:370px" %)
182 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**Size(bytes)(% style="display:none" %) (%%)**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**
183 -|(% style="width:99px" %)Value|(% style="width:62px" %)Sensor Model|(% style="width:80px" %)Firmware Version|(% style="width:82px" %)Frequency Band|(% style="width:85px" %)Sub-band|(% style="width:46px" %)BAT
198 +Modify the content in text as shown in image 9, the text content of label widget will be changed accordingly.
184 184  
185 -[[image:image-20240507152130-12.png||height="469" width="1366"]](% style="display:none" %)
200 +[[image:image-20240928090825-1.png||height="327" width="391"]]
186 186  
187 -Example Payload (FPort=5):  [[image:image-20240507152254-13.png||height="26" width="130"]]
202 + image 9 modify text content of label widget
188 188  
204 +**4. Add image into project**
189 189  
190 -(% style="color:#4472c4" %)**Sensor Model**(%%): For PB01, this value is 0x35.
206 +To use the image widget, you should first add an image to your project. The image format must be PNG, and its resolution should not exceed 800x480 pixels. There are two ways to add an image file. One way is to move your image into the folder "…/squareline project/assets/", as shown in image 10. The other way is to click the "ADD FILE INTO ASSETS" button, then select an image from your computer to import. After adding, you can see the image in the "assets" area in SquareLine Studio, as demonstrated in image 11.
191 191  
192 -(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.
208 +[[image:image-20240928113424-9.png||height="355" width="505"]]
193 193  
194 -(% style="color:#4472c4" %)**Frequency Band**:
210 + image 10 add image file into SquareLine Studio project
195 195  
196 -*0x01: EU868
212 +[[image:image-20240928114139-10.png||height="559" width="810"]]
197 197  
198 -*0x02: US915
214 + image 11 use image widget in SquareLine Studio
199 199  
200 -*0x03: IN865
216 +**5. The relationship between widgets**
201 201  
202 -*0x04: AU915
218 +There are two common relationships between widgets: one is parallel, the other is parent-child. The parallel relationship means that widgets' relative position is based on a collective object of reference. In parent-child relationship, the parts of the child object that are outside the boundaries of the parent object are not visible by default. Therefore, we need to adjust the position of the child object so that it falls within the range of the parent object, allowing it to be seen as illustrated in image 13.
203 203  
204 -*0x05: KZ865
220 +[[image:1727486567182-334.png||height="318" width="278"]]
205 205  
206 -*0x06: RU864
222 +image 12 move label1 to make label1 widget be a child of button1 widget(1)
207 207  
208 -*0x07: AS923
224 +[[image:image-20240928112001-8.png||height="431" width="796"]]
209 209  
210 -*0x08: AS923-1
226 + image 13 move label1 to make label1 widget be a child of button1 widget(2)
211 211  
212 -*0x09: AS923-2
228 +**6. Preview the final effect**
213 213  
214 -*0x0a: AS923-3
230 +An advantage of this kind of software is that you can edit the UI with quick previews. In other words, it provides a way of combining graphical programming with simulation immediately.
215 215  
232 +[[image:1727487368023-281.png]]
216 216  
217 -(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
234 + image 14 click on the triangle icon to start or end the simulation
218 218  
219 -(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for PB01.
236 +For more detailed usage, please visit the official link: [[SquareLine Studio 1.4.2 Documentation ~| SquareLine Studio>>url:https://docs.squareline.io/docs/squareline/]].
220 220  
221 -(% style="color:#4472c4" %)**Ex1**(%%): 0x0C DE = 3294mV
222 222  
239 +== 2.4 Integrate UI Code to ESP-IDF Project ==
223 223  
224 -=== 2.4.2  Uplink FPORT~=2, Real time sensor value ===
225 225  
242 +To achieve the integrating, we first need to export the UI code, then make some modifications, and finally relocate the UI code to a specific position within the project.
226 226  
227 -PB01 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].
244 +[[image:1727229798126-306.png]]
228 228  
229 -Uplink uses FPORT=2 and every 20 minutes send one uplink by default.
246 + image 15 export UI file
230 230  
231 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460px" %)
232 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
233 -**Size(bytes)**
234 -)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)2|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
235 -**1**
236 -)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
237 -**1**
238 -)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)(((
239 -**2**
240 -)))|=(% style="width: 40px;background-color:#4F81BD;color:white" %)(((
241 -**2**
242 -)))
243 -|(% style="width:97px" %)(((
244 -Value
245 -)))|(% style="width:39px" %)Battery|(% style="width:39px" %)(((
246 -Sound_ACK
248 +[[image:1727229821582-258.png||height="333" width="662"]]
247 247  
248 -&Sound_key
249 -)))|(% style="width:100px" %)(((
250 -(((
251 -Alarm
252 -)))
253 -)))|(% style="width:77px" %)(((
254 -(((
255 -Temperature
256 -)))
257 -)))|(% style="width:47px" %)(((
258 -Humidity
259 -)))
250 + image 16 exported UI file
260 260  
261 -Example in TTN.
252 +Create a empty directory entitled "ui" in path "basic_prj/app_components/ui/", and then copy all UI code exported to this directory.
262 262  
263 -[[image:image-20240507150155-11.png||height="549" width="1261"]]
254 +[[image:image-20240928144830-11.png]]
264 264  
265 -Example Payload (FPort=2):  (% style="background-color:yellow" %)**0C EA 03 01 01 11 02 A8**
256 + image 17 open CMakeLists.txt
266 266  
267 -==== (% style="color:blue" %)**Battery:**(%%) ====
258 +[[image:1727229892636-154.png||height="521" width="407"]]
268 268  
269 -Check the battery voltage.
260 + image 18 modify CMakeLists.txt
270 270  
271 -* Ex1: 0x0CEA = 3306mV
272 -* Ex2: 0x0D08 = 3336mV
262 +The last step of integrating is adding two lines of code in main.c file.
273 273  
274 -==== (% style="color:blue" %)**Sound_ACK & Sound_key:**(%%) ====
264 +[[image:1727229926561-300.png]]
275 275  
276 -Key sound and ACK sound are enabled by default.
266 + image 19 add "ui.h"
277 277  
278 -* Example1: 0x03
268 +[[image:1727229955611-607.png]]
279 279  
280 - Sound_ACK: (03>>1) & 0x01=1, OPEN.
270 + image 20 add "ui_init()"
281 281  
282 -**~ ** Sound_key:  03 & 0x01=1, OPEN.
283 283  
284 -* Example2: 0x01
273 +== 2.5 Brief introduction of hello world project ==
285 285  
286 - Sound_ACK: (01>>1) & 0x01=0, CLOSE.
287 287  
288 -**~ ** Sound_key:  01 & 0x01=1, OPEN.
276 +The project consists of two screens. The first screen displays the company's logo, the project name, and a button to navigate to the next screen. The second screen presents some information about this HMI screen product through an image and includes a button to return to the previous screen.
289 289  
290 290  
291 -==== (% style="color:blue" %)**Alarm:**(%%) ====
279 +== 2.6 Test Result ==
292 292  
293 -Key alarm.
294 294  
295 -* Ex1: 0x01 & 0x01=1, TRUE.
296 -* Ex2: 0x00 & 0x01=0, FALSE.
282 +By pressing the button lying bottom right, the screen can switch to another as expected. This indicates that the UI file has been successfully integrated into the project and is now effective.
297 297  
298 -==== (% style="color:blue" %)**Temperature:**(%%) ====
284 +[[image:1727488067077-684.png||height="402" width="574"]]
299 299  
300 -* Example1:  0x0111/10=27.3℃
301 -* Example2:  (0xFF0D-65536)/10=-24.3℃
286 + image 21 screen1
302 302  
303 -If payload is: FF0D :  (FF0D & 8000 == 1) , temp = (FF0D - 65536)/100 =-24.3℃
288 +[[image:1727488157579-949.png||height="397" width="572"]]
304 304  
305 -（FF0D & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
290 + image 22 screen2
306 306  
307 307  
308 -==== (% style="color:blue" %)**Humidity:**(%%) ====
293 += 3. Example Project 1: LoRa Central Display =
309 309  
310 -* Humidity:    0x02A8/10=68.0%
295 +[[image:image-20240916101737-1.png||height="468" width="683"]]
311 311  
312 -=== 2.4.3  Uplink FPORT~=3, Datalog sensor value ===
313 313  
298 += 4. Example Project 2: LoRaWAN RS485 Alarm =
314 314  
315 -PB01 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.
300 += 5.  The way to add a new panel to project =
316 316  
317 -[[image:image-20240510144912-1.png||height="471" width="1178"]](% style="display:none" %)
302 +**~1. Design a panel in SquareLine Studio, using image 5.1 below as a reference.**
318 318  
304 +[[image:image-20241121113445-1.png||height="584" width="934"]]
319 319  
320 -* Each data entry is 11 bytes, to save airtime and battery, PB01 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)
306 + image 5.1 a panel about water_leak
321 321  
322 -For example, in US915 band, the max payload for different DR is:
308 +**2. Export the ui file.** You need  to adjust the export path first, then click "Export->Export UI Files". This step had been introduced before. Then you can get the ui files as shown in image 5.2.
323 323  
324 -1. **DR0**: max is 11 bytes so one entry of data
325 -1. **DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
326 -1. **DR2**: total payload includes 11 entries of data
327 -1. **DR3**: total payload includes 22 entries of data.
310 +[[image:image-20241121141120-4.png||height="383" width="795"]]
328 328  
329 -(% style="color:red" %)**Notice: PB01 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**
312 + image 5.2 ui files exported
330 330  
331 -See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].
314 +**3. Delete or rename some file.** Here are the steps:
332 332  
333 -(% style="display:none" %) (%%)
316 + Step1 Delete the 'components' directory.
317 + Step2 Delete 'filelist.txt'.
318 + Step3 Delete 'ui_helpers.c' and 'ui_helpers.h'.
319 + Step4 Rename 'ui_ScreenMain.c' in the 'screens' directory to 'ui_water_leak_style.c'.
320 + Step5 Rename the 'screens' directory to 'styles'.
334 334  
335 -=== 2.4.4  Decoder in TTN V3 ===
322 +[[image:image-20241121151934-10.png||height="303" width="792"]]
336 336  
324 + image 5.3 rest file (1)
337 337  
338 -In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.
326 +[[image:image-20241121142925-7.png||height="141" width="793"]]
339 339  
340 -In TTN , add formatter as below:
328 + image 5.4 rest file (2)
341 341  
342 -[[image:image-20240507162814-16.png||height="778" width="1135"]]
330 +**4. Open this project in vscode.**
343 343  
344 -(((
345 -Please check the decoder from this link:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
346 -)))
332 +5. Add file include path about water_leak in extra_lib/CMakeLists.txt as shown in image 5.5, 5.6, and its format is similar to the tem_hum or door.
347 347  
348 -(((
349 -
350 -)))
334 +[[image:image-20241121181957-17.png||height="438" width="516"]]
351 351  
352 -== 2.5 Show data on Datacake ==
336 + image 5.5 extra_lib/CMakeLists.txt before add
353 353  
338 +[[image:image-20241121182239-18.png||height="520" width="518"]]
354 354  
355 -(((
356 -Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
357 -)))
340 + image 5.6 extra_lib/CMakeLists.txt after add
358 358  
359 -(((
360 -
361 -)))
342 +**6. Modify header file include in fonts and images directory.** Open the fonts/ui_font_Font12.c file, as shown in image 5.7, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.8 is the modified image. Other font file need to be modified in same way.
362 362  
363 -(((
364 -(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the LoRaWAN network.
365 -)))
344 +[[image:image-20241121171629-11.png]]
366 366  
367 -(((
368 -(% style="color:blue" %)**Step 2**(%%):  Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
369 -)))
346 + image 5.7 before-modified font file
370 370  
371 -(((
372 -~1. Add Datacake:
373 -)))
348 +[[image:image-20241121171901-12.png]]
374 374  
375 -(((
376 -2. Select default key as Access Key:
377 -)))
350 + image 5.8 modified font file
378 378  
379 -(((
380 -3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add PB01:
381 -)))
352 +Open the images/ui_img_battery_empty_png.c file, as shown in image 5.9, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.10 is the modified image. Other image file need to be modified in same way.
382 382  
383 -(((
384 - Please refer to the figure below.
385 -)))
354 +[[image:image-20241121172714-13.png]]
386 386  
387 -[[image:image-20240510150924-2.png||height="612" width="1186"]]
356 + image 5.9 before-modified image file
388 388  
358 +[[image:image-20241121172908-14.png]]
389 389  
390 -Log in to DATACAKE, copy the API under the account.
360 + image 5.10 modified image file
391 391  
392 -[[image:image-20240510151944-3.png||height="581" width="1191"]]
362 +**7. Modify the ui_water_leak/CMakeLists.txt.** Open this file, and modify it from image 5.11 to image 5.12.
393 393  
364 +[[image:image-20241121180030-15.png]]
394 394  
366 + image 5.11 ui_water_leak/CMakeLists.txt before modification
395 395  
396 -[[image:image-20240510152150-4.png||height="697" width="1188"]]
368 +[[image:image-20241121180517-16.png]]
397 397  
370 + image 5.12 ui_water_leak/CMakeLists.txt after modification
398 398  
399 -[[image:image-20240510152300-5.png||height="298" width="1191"]]
372 +**8. Modify ui_water_leak.h file.** The image 5.13, 5.14 show the code before modification, and the image 5.15, 5.16 show the code after modification.
400 400  
374 +[[image:image-20241122094200-23.png]]
401 401  
402 -[[image:image-20240510152355-6.png||height="782" width="1193"]]
376 + image 5.13 ui_water_leak.h (1) before modification
403 403  
404 -[[image:image-20240510152542-8.png||height="545" width="739"]]
378 +[[image:image-20241122094320-24.png||height="852" width="554"]]
405 405  
406 -[[image:image-20240510152634-9.png||height="748" width="740"]]
380 + image 5.14 ui_water_leak.h (2) before modification
407 407  
382 +[[image:image-20241122094600-25.png||height="1078" width="554"]]
408 408  
409 -[[image:image-20240510152809-10.png||height="607" width="732"]]
384 + image 5.15 ui_water_leak.h (1) after modification
410 410  
411 -[[image:image-20240510153934-14.png||height="460" width="1199"]]
386 +[[image:image-20241122094719-26.png||height="941" width="583"]]
412 412  
388 + image 5.16 ui_water_leak.h (2) before modification
413 413  
414 -[[image:image-20240510153435-12.png||height="428" width="1197"]]
390 +**9. Modify ui_water_leak.c file.** The image 5.17, 5.18, 5.19 show the code before modification, and the image 5.20, 5.21, 5.22 show the code after modification.
415 415  
392 +_ui_flag_modify( ((lv_obj_t *)(e->user_data)), LV_OBJ_FLAG_HIDDEN, _UI_MODIFY_FLAG_TOGGLE);  This code replaces 4 lines of code in ui_water_leak.c, so it is pasted here for convenience.
416 416  
417 -Copy and paste the [[TTN decoder>>https://github.com/dragino/dragino-end-node-decoder]] here and save.
394 +[[image:image-20241122102929-27.png||height="619" width="426"]]
418 418  
419 -[[image:image-20240510153624-13.png||height="468" width="1195"]]
396 + image 5.17 ui_water_leak.c (1) before modification
420 420  
398 +[[image:image-20241122112838-30.png||height="551" width="628"]]
421 421  
422 -Visual widgets please read the DATACAKE documentation.
400 + image 5.18 ui_water_leak.c (2) before modification
423 423  
424 -(% style="display:none" %) (%%)
402 +[[image:image-20241122110815-29.png||height="725" width="712"]]
425 425  
426 -== 2.6  Datalog Feature ==
404 + image 5.19 ui_water_leak.c (3) before modification
427 427  
406 +[[image:image-20241122113158-31.png||height="872" width="677"]]
428 428  
429 -(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
430 -When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.
408 + image 5.20 ui_water_leak.c (1) after modification
431 431  
410 +[[image:image-20241122113259-33.png||height="874" width="724"]]
432 432  
433 -=== 2.6.1  Unix TimeStamp ===
412 + image 5.21 ui_water_leak.c (2) after modification
434 434  
414 +[[image:image-20241122113359-34.png||height="804" width="746"]]
435 435  
436 -Unix TimeStamp shows the sampling time of uplink payload. format base on
416 + image 5.22 ui_water_leak.c (3) after modification
437 437  
438 -[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
418 +**10. Modify ui_water_leak_events.h file.** The image 5.23 show the code before modification, and the image 5.24 show the code after modification.
439 439  
440 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
420 +[[image:image-20241122134113-35.png||height="380" width="421"]]
441 441  
442 -For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)
422 + image 5.23 ui_water_leak_events_.h before modification
443 443  
424 +[[image:image-20241122134420-37.png||height="201" width="283"]]
444 444  
445 -[[image:1655782409139-256.png]]
426 +image 5.24 ui_water_leak_events_.h after modification
446 446  
428 +**11. Modify ui_water_leak_events.c file.** The image 5.25 show the code before modification, and the image 5.26 show the code after modification.
447 447  
448 -=== 2.6.2  Poll sensor value ===
430 +Step1. '#include "ui.h"'~-~->'#include "ui_water_leak.h"'
449 449  
432 +Step2. add code  below in delete_object() function definition.
450 450  
451 -(((
452 -User can poll sensor value based on timestamps from the server. Below is the downlink command.
453 -)))
434 + panel_all * panel = find_upper_by_SensorPanel(&arr,((lv_obj_t *)(e->user_data~)~)~);
454 454  
455 -(((
456 -Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
457 -)))
436 + size_t index = panel->panel_obj_index;
458 458  
459 -(((
460 -For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)
461 -)))
438 + deleteElement(&arr, index);
462 462  
463 -(((
464 -Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data
465 -)))
440 +[[image:image-20241122135023-38.png||height="358" width="372"]]
466 466  
467 -(((
468 -Uplink Internal =5s，means PB01 will send one packet every 5s. range 5~~255s.
469 -)))
442 + image 5.25 ui_water_leak_events_.c before modification
470 470  
444 +[[image:image-20241122135258-39.png||height="403" width="559"]]
471 471  
472 -=== 2.6.3  Datalog Uplink payload ===
446 + image 5.26 ui_water_leak_events_.c after modification
473 473  
448 +**12. Modify ui_water_leak_style.c file.**
474 474  
475 -See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]
450 +Step1. '#include "../ui.h"'~-~->#include '"../ui_water_leak.h"'
476 476  
477 -(% style="display:none" %) (%%) (% style="display:none" %)
452 + add '#include "../../sort.h"'
478 478  
479 -== 2.7 Button ==
454 + add '#include "ui.h"'
480 480  
456 +[[image:image-20241122141536-41.png||height="361" width="612"]]
481 481  
482 -* ACT button
458 + image 5.27 ui_water_leak_style.c (1) before modification
483 483  
484 -Long press this button PB01 will reset and join network again.
460 +[[image:image-20241122142129-42.png||height="386" width="613"]]
485 485  
486 -[[image:image-20240510161626-17.png||height="192" width="224"]]
462 + image 5.28 ui_water_leak_style.c (1) after modification
487 487  
488 -* Alarm button
464 +Step2. modify 'void ui_ScreenMain_screen_init(void)'~-~->'panel_with_type create_water_leak(uint8_t index)'
489 489  
490 -Press the button PB01 will immediately uplink data, and alarm is "TRUE".
466 + delete code as shown in image 5.29
491 491  
492 -[[image:image-20240705095149-5.png||height="164" width="162"]](% style="display:none" %)
468 +[[image:image-20241122145620-44.png||height="757" width="671"]]
493 493  
470 + image 5.29 ui_water_leak_style.c (2)
494 494  
495 -== 2.8 LED Indicator ==
472 +Step3. The image 5.30, 5.31 show the change.
496 496  
474 +[[image:image-20241122152026-45.png||height="277" width="828"]]
497 497  
498 -(((
499 -The PB01 has a triple color LED which for easy showing different stage.
500 -)))
476 + image 5.30 ui_water_leak_style.c (3) before modification
501 501  
502 -Hold the ACT green light to rest, then the green flashing node restarts, the blue flashing once upon request for network access, and the green constant light for 5 seconds after successful network access
478 +[[image:image-20241122152542-46.png||height="293" width="830"]]
503 503  
504 -(((
505 -(% style="color:#037691" %)**In a normal working state**:
506 -)))
480 + image 5.31 ui_water_leak_style.c (3) after modification
507 507  
508 -* When the node is restarted, hold the ACT (% style="color:green" %)**GREEN**(%%) lights up , then the (% style="color:green" %)**GREEN**(%%) flashing node restarts.The (% style="color:blue" %)**BLUE**(%%) flashing once upon request for network access, and the (% style="color:green" %)**GREEN**(%%) constant light for 5 seconds after successful network access(% style="color:#0000ff" %)**.**
509 -* During OTAA Join:
510 -** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.
511 -** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.
512 -* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.
513 -* Press the alarm button，The (% style="color:red" %)**RED**(%%) flashes until the node receives the ACK from the platform and the (% style="color:blue" %)**BLUE**(%%) light stays 5s.
482 +Step4. Copy partly the code in ui_water_leak.c, paste at extra_lib/sort.h(The process is shown in image 5.32, 5.33).
514 514  
515 -(((
516 -
517 -)))
484 +[[image:image-20241122153958-47.png]]
518 518  
519 -== 2.9 Buzzer ==
486 + image 5.32 ui_water_leak_style.c (4)
520 520  
488 +[[image:image-20241122154755-49.png||height="864" width="513"]]
521 521  
522 -The PB01 has** button sound** and** ACK sound** and users can turn on or off both sounds by using [[AT+SOUND>>||anchor="H3.3A0Setbuttonsoundandbuttonalarm"]].
490 + image 5.33 ui_water_leak_style.c (4)
523 523  
524 -* (% style="color:#4f81bd" %)**Button sound**(%%)** **is the music produced by the node after the alarm button is pressed.
492 +Step5. Delete event function in code which was just pasted in extra_lib/sort.h(The process is shown in image 5.34).
525 525  
526 - Users can use[[ AT+OPTION>>||anchor="H3.4A0Setbuzzermusic2807E429"]] to set different button sounds.
494 +[[image:image-20241122155650-50.png||height="922" width="513"]]
527 527  
528 -* (% style="color:#4f81bd" %)**ACK sound **(%%)is the notification tone that the node receives ACK.
496 + image 5.34 ui_water_leak_style.c (5)
529 529  
530 -= 3.  Configure PB01 via AT command or LoRaWAN downlink =
498 +Step6. Add some lines of code in extra_lib/sort.h as shown in image 5.35.
531 531  
500 +[[image:image-20241122161934-51.png]]
532 532  
533 -Users can configure PB01 via AT Command or LoRaWAN Downlink.
502 + image 5.35
534 534  
535 -* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
504 +Step7. Add a line of code in extra_lib/sort.h as shown in image 5.36.
536 536  
537 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
506 +[[image:image-20241122162852-53.png||height="330" width="529"]]
538 538  
539 -There are two kinds of commands to configure PB01, they are:
508 + image 5.37
540 540  
541 -* (% style="color:#4f81bd" %)**General Commands:**
510 +Step8. Add some code in ui_water_leak_style.c as shown in image 5.38 from line534 to line 576 in detail.
542 542  
543 -These commands are to configure:
512 +panel_with_type union_sensor;
544 544  
545 -* General system settings like: uplink interval.
514 +union_sensor.panel_type = WATER_LEAK_TYPE;
546 546  
547 -* LoRaWAN protocol & radio-related commands.
516 +......
548 548  
549 -They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
518 +lv_obj_set_x(union_sensor.panel_union.door.ui_PanelSensorDoor, x_by_index(index));
550 550  
520 +lv_obj_set_y(union_sensor.panel_union.door.ui_PanelSensorDoor, y_by_index(index));
551 551  
552 -* (% style="color:#4f81bd" %)**Commands special design for PB01**
522 +return union_sensor;
553 553  
554 -These commands are only valid for PB01, as below:
524 +[[image:image-20241122171211-54.png||height="635" width="792"]]
555 555  
556 -(% style="display:none" %) (%%)
526 + image 5.38
557 557  
558 -== 3.1  Downlink Command Set ==
528 +**13. Modify sort.c file.**
559 559  
530 +Add a line of code ~-~-'#include "ui_water_leak.h"' as shown in image 5.39 line 16.
560 560  
561 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
562 -|=(% style="width: 130px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 151px; background-color: rgb(79, 129, 189); color: white;" %)**Function**|=(% style="width: 92px; background-color: rgb(79, 129, 189); color: white;" %)**Response**|=(% style="width: 206px; background-color: rgb(79, 129, 189); color: white;" %)**Downlink**
563 -|(% style="width:130px" %)AT+TDC=?|(% style="width:151px" %)(((
564 -
532 +[[image:image-20241122173718-56.png||height="378" width="579"]]
565 565  
566 -View current TDC time
567 -)))|(% style="width:92px" %)(((
568 -1200000
569 -OK
570 -)))|(% style="width:206px" %)Default 1200000(ms)
571 -|(% style="width:130px" %)AT+TDC=300000|(% style="width:151px" %)Set TDC time|(% style="width:92px" %)OK|(% style="width:206px" %)(((
572 -(((
573 -0X0100012C:
574 -01: fixed command
575 -00012C: 0X00012C=
534 + image 5.39 sort.c (1)
576 576  
577 -300(seconds)
578 -)))
536 +There are still some changes need to be done in sort.c, and omit here for the moment.
579 579  
580 -(((
581 -
582 -)))
583 -)))
584 -|(% style="width:130px" %)ATZ|(% style="width:151px" %)Reset node|(% style="width:92px" %) |(% style="width:206px" %)0x04FF
585 -|(% style="width:130px" %)AT+FDR|(% style="width:151px" %)Restore factory settings|(% style="width:92px" %) |(% style="width:206px" %)0X04FE
586 -|(% style="width:130px" %)AT+CFM=?|(% style="width:151px" %)View the current confirmation mode status|(% style="width:92px" %)(((
587 -0,7,0
588 588  
589 -OK
590 -)))|(% style="width:206px" %)Default 0,7,0
591 -|(% style="width:130px" %)AT+CFM=1,7,1|(% style="width:151px" %)(((
592 -Confirmed uplink mode, the maximum number of retries is seven, and uplink fcnt increase by 1 for each retry
593 -)))|(% style="width:92px" %)(((
594 -OK
595 -)))|(% style="width:206px" %)(((
596 -05010701
597 -
598 -05: fixed command
599 -
600 -01:confirmed uplink
601 -
602 -07: retry 7 times
603 -
604 -01: fcnt count plus 1
605 -)))
606 -|(% style="width:130px" %)AT+NJM=?|(% style="width:151px" %)(((
607 -Check the current network connection method
608 -)))|(% style="width:92px" %)(((
609 -1
610 -OK
611 -)))|(% style="width:206px" %)Default 1
612 -|(% style="width:130px" %)AT+NJM=0|(% style="width:151px" %)Change the network connection method to ABP|(% style="width:92px" %)(((
613 -Attention:Take effect after ATZ
614 -OK
615 -)))|(% style="width:206px" %)(((
616 -0X2000: ABP
617 -0x2001: OTAA
618 -20: fixed command
619 -)))
620 -|(% style="width:130px" %)AT+RPL=?|(% style="width:151px" %)View current RPL settings|(% style="width:92px" %)(((
621 -0
622 -OK
623 -)))|(% style="width:206px" %)Default 0
624 -|(% style="width:130px" %)AT+RPL=1|(% style="width:151px" %)set RPL=1    |(% style="width:92px" %)OK|(% style="width:206px" %)(((
625 -0x2101:
626 -21: fixed command
627 -01: for details, check wiki
628 -)))
629 -|(% style="width:130px" %)AT+ADR=?|(% style="width:151px" %)View current ADR status|(% style="width:92px" %)(((
630 -1
631 -OK
632 -)))|(% style="width:206px" %)Default 0
633 -|(% style="width:130px" %)AT+ADR=0|(% style="width:151px" %)Set the ADR state to off|(% style="width:92px" %)OK|(% style="width:206px" %)(((
634 -0x2200: close
635 -0x2201: open
636 -22: fixed command
637 -)))
638 -|(% style="width:130px" %)AT+DR=?|(% style="width:151px" %)View the current DR settings|(% style="width:92px" %)OK|(% style="width:206px" %)
639 -|(% style="width:130px" %)AT+DR=1|(% style="width:151px" %)(((
640 -set DR to 1
641 -It takes effect only when ADR=0
642 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
643 -0X22000101:
644 -00: ADR=0
645 -01: DR=1
646 -01: TXP=1
647 -22: fixed command
648 -)))
649 -|(% style="width:130px" %)AT+TXP=?|(% style="width:151px" %)View the current TXP|(% style="width:92px" %)OK|(% style="width:206px" %)
650 -|(% style="width:130px" %)AT+TXP=1|(% style="width:151px" %)(((
651 -set TXP to 1
652 -It takes effect only when ADR=0
653 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
654 -0X22000101:
655 -00: ADR=0
656 -01: DR=1
657 -01: TXP=1
658 -22: fixed command
659 -)))
660 -|(% style="width:130px" %)AT+RJTDC=10|(% style="width:151px" %)Set RJTDC time interval|(% style="width:92px" %)OK|(% style="width:206px" %)(((
661 -0X26000A:
662 -26: fixed command
663 -000A: 0X000A=10(min)
664 -for details, check wiki
665 -)))
666 -|(% style="width:130px" %) |(% style="width:151px" %)(((
667 -(((
668 -~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
669 -
670 -Retrieve stored data for a specified period of time
671 -)))
672 -
673 -(((
674 -
675 -)))
676 -)))|(% style="width:92px" %) |(% style="width:206px" %)(((
677 -0X3161DE7C7061DE8A800A:
678 -31: fixed command
679 -61DE7C70:0X61DE7C70=2022/1/12 15:00:00
680 -61DE8A80:0X61DE8A80=2022/1/12 16:00:00
681 -0A: 0X0A=10(second)
682 -View details 2.6.2
683 -)))
684 -|(% style="width:130px" %)AT+DDETECT=?|(% style="width:151px" %)View the current DDETECT setting status and time|(% style="width:92px" %)(((
685 -1,1440,2880
686 -OK
687 -)))|(% style="width:206px" %)Default 1,1440,2880(min)
688 -|(% style="width:130px" %)AT+DDETECT=(((
689 -1,1440,2880
690 -)))|(% style="width:151px" %)(((
691 -Set DDETECT setting status and time
692 -((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))
693 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
694 -0X320005A0: close
695 -0X320105A0: open
696 -32: fixed command
697 -05A0: 0X05A0=1440(min)
698 -)))
699 -
700 -== 3.2  Set Password ==
701 -
702 -
703 -Feature: Set device password, max 9 digits.
704 -
705 -(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
706 -
707 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
708 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
709 -|(% style="width:155px" %)AT+PWORD=?|(% style="width:124px" %)Show password|(% style="width:86px" %)(((
710 -123456
711 -OK
712 -)))
713 -|(% style="width:155px" %)AT+PWORD=999999|(% style="width:124px" %)Set password|(% style="width:86px" %)OK
714 -
715 -(% style="color:#4f81bd" %)**Downlink Command:**
716 -
717 -No downlink command for this feature.
718 -
719 -
720 -== 3.3  Set button sound and ACK sound ==
721 -
722 -
723 -Feature: Turn on/off button sound and ACK alarm.
724 -
725 -(% style="color:#4f81bd" %)**AT Command: AT+SOUND**
726 -
727 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
728 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
729 -|(% style="width:155px" %)(((
730 -AT+SOUND=?
731 -)))|(% style="width:124px" %)Get the current status of button sound and ACK sound|(% style="width:86px" %)(((
732 -1,1
733 -OK
734 -)))
735 -|(% style="width:155px" %)(((
736 -AT+SOUND=0,1
737 -)))|(% style="width:124px" %)Turn off the button sound and turn on ACK sound|(% style="width:86px" %)OK
738 -
739 -(% style="color:#4f81bd" %)**Downlink Command: 0xA1 **
740 -
741 -Format: Command Code (0xA1) followed by 2 bytes mode value.
742 -
743 -The first byte after 0XA1 sets the button sound, and the second byte after 0XA1 sets the ACK sound.** (0: off, 1: on)**
744 -
745 -* **Example: **Downlink Payload: A10001  ~/~/ Set AT+SOUND=0,1  Turn off the button sound and turn on ACK sound.
746 -
747 -== 3.4  Set buzzer music type(0~~4) ==
748 -
749 -
750 -Feature: Set different alarm key response sounds.There are five different types of button music.
751 -
752 -(% style="color:#4f81bd" %)**AT Command: AT+OPTION**
753 -
754 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
755 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
756 -|(% style="width:155px" %)(((
757 -AT+OPTION=?
758 -)))|(% style="width:124px" %)(((
759 -Get the buzzer music type
760 -)))|(% style="width:86px" %)(((
761 -3
762 -
763 -OK
764 -)))
765 -|(% style="width:155px" %)AT+OPTION=1|(% style="width:124px" %)Set the buzzer music to type 1|(% style="width:86px" %)OK
766 -
767 -(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
768 -
769 -Format: Command Code (0xA3) followed by 1 byte mode value.
770 -
771 -* **Example: **Downlink Payload: A300  ~/~/ Set AT+OPTION=0  Set the buzzer music to type 0.
772 -
773 -== 3.5  Set Valid Push Time ==
774 -
775 -
776 -Feature: Set the holding time for pressing the alarm button to avoid miscontact. Values range from** 0 ~~1000ms**.
777 -
778 -(% style="color:#4f81bd" %)**AT Command: AT+STIME**
779 -
780 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
781 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
782 -|(% style="width:155px" %)(((
783 -AT+STIME=?
784 -)))|(% style="width:124px" %)(((
785 -Get the button sound time
786 -)))|(% style="width:86px" %)(((
787 -0
788 -OK
789 -)))
790 -|(% style="width:155px" %)(((
791 -AT+STIME=1000
792 -)))|(% style="width:124px" %)Set the button sound time to 1000**ms**|(% style="width:86px" %)OK
793 -
794 -(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
795 -
796 -Format: Command Code (0xA2) followed by 2 bytes mode value.
797 -
798 -* **Example: **Downlink Payload: A203E8  ~/~/ Set AT+STIME=1000  
799 -
800 -**~ Explain: **Hold the alarm button for 10 seconds before the node will send the alarm packet.
801 -
802 -
803 -
804 -
805 805  = 6. FAQ =
806 806  
807 -== 6.1 ==
541 +== 6.1 ==
808 808  
809 809  
810 810  = 7. Order Info =
... ... @@ -811,12 +811,13 @@
811 811  
812 812  == 7.1  Part Number ==
813 813  
548 +
814 814  Part Number: (% style="color:#4472c4" %)LTS5
815 815  
816 -
817 817  
818 818  == 7.2  Packing Info ==
819 819  
554 +
820 820  **Package Includes**:
821 821  
822 822  * LTS5 HMI Touch Screen
... ... @@ -823,20 +823,19 @@
823 823  * 5V,2A DC Power Adapter.
824 824  * USB Type C Program Cable
825 825  
826 -
827 827  = 8. Support =
828 828  
563 +
829 829  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
830 830  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
831 831  
832 -
833 833  = 9.  Reference material =
834 834  
569 +
835 835  * Datasheet
836 836  * Source Code
837 837  * Mechinical
838 838  
839 -
840 840  = 10. FCC Warning =
841 841  
842 842  
1727229396732-319.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +197.2 KB
Content
1727229550717-684.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +113.9 KB
Content
1727229582471-566.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +73.6 KB
Content
1727229618724-758.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +118.7 KB
Content
1727229653254-680.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +116.2 KB
Content
1727229682537-381.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +51.5 KB
Content
1727229715361-392.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +75.2 KB
Content
1727229740592-843.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +87.3 KB
Content
1727229760857-521.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content
1727229798126-306.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +53.6 KB
Content
1727229821582-258.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +76.1 KB
Content
1727229845835-509.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
1727229892636-154.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +192.0 KB
Content
1727229926561-300.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +178.0 KB
Content
1727229955611-607.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +100.4 KB
Content
1727229990795-405.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +383.6 KB
Content
1727230012478-930.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +477.1 KB
Content
1727231038705-173.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +94.6 KB
Content
1727233636007-933.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +114.8 KB
Content
1727484665746-713.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +94.9 KB
Content
1727485118799-984.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +11.8 KB
Content
1727485251053-655.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
1727485480434-713.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content
1727485933579-550.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
1727485953726-175.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +91.6 KB
Content
1727486567182-334.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
1727486578489-774.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +66.0 KB
Content
1727487368023-281.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +28.5 KB
Content
1727488067077-684.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +604.7 KB
Content
1727488099947-341.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
1727488108117-780.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
1727488157579-949.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
image-20240916101737-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +156.7 KB
Content
image-20240925110638-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +262.7 KB
Content
image-20240928090825-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +30.2 KB
Content
image-20240928103357-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +153.7 KB
Content
image-20240928103506-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +197.7 KB
Content
image-20240928105309-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +80.2 KB
Content
image-20240928110211-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +228.0 KB
Content
image-20240928111412-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +150.9 KB
Content
image-20240928111654-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +105.4 KB
Content
image-20240928112001-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20240928113424-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +50.8 KB
Content
image-20240928114139-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20240928144830-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20241121113445-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +250.0 KB
Content
image-20241121120222-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +44.8 KB
Content
image-20241121120830-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
image-20241121141120-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +41.7 KB
Content
image-20241121141315-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
image-20241121141329-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
image-20241121142925-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.8 KB
Content
image-20241121145915-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +61.0 KB
Content
image-20241121150911-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +73.0 KB
Content
image-20241121151934-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20241121171629-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +16.9 KB
Content
image-20241121171901-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +17.2 KB
Content
image-20241121172714-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +26.4 KB
Content
image-20241121172908-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +27.1 KB
Content
image-20241121180030-15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +27.7 KB
Content
image-20241121180517-16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +26.5 KB
Content
image-20241121181957-17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +59.3 KB
Content
image-20241121182239-18.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +71.3 KB
Content
image-20241122092239-19.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +270.9 KB
Content
image-20241122092655-20.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +251.6 KB
Content
image-20241122093445-21.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +128.9 KB
Content
image-20241122093601-22.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +120.0 KB
Content
image-20241122094200-23.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +289.2 KB
Content
image-20241122094320-24.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +182.4 KB
Content
image-20241122094600-25.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +136.0 KB
Content
image-20241122094719-26.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +129.5 KB
Content
image-20241122102929-27.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +219.9 KB
Content
image-20241122104344-28.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +257.1 KB
Content
image-20241122110815-29.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +246.1 KB
Content
image-20241122112838-30.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +263.9 KB
Content
image-20241122113158-31.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +133.7 KB
Content
image-20241122113252-32.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +152.3 KB
Content
image-20241122113259-33.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +152.3 KB
Content
image-20241122113359-34.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +126.5 KB
Content
image-20241122134113-35.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +69.3 KB
Content
image-20241122134412-36.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20241122134420-37.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20241122135023-38.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20241122135258-39.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +40.3 KB
Content
image-20241122141526-40.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +78.8 KB
Content
image-20241122141536-41.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +78.8 KB
Content
image-20241122142129-42.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20241122143105-43.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +60.2 KB
Content
image-20241122145620-44.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +394.0 KB
Content
image-20241122152026-45.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +201.6 KB
Content
image-20241122152542-46.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +95.3 KB
Content
image-20241122153958-47.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +241.1 KB
Content
image-20241122154745-48.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +135.7 KB
Content
image-20241122154755-49.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +135.7 KB
Content
image-20241122155650-50.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content
image-20241122161934-51.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +230.3 KB
Content
image-20241122162612-52.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +58.7 KB
Content
image-20241122162852-53.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +125.5 KB
Content
image-20241122171211-54.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +173.3 KB
Content
image-20241122173706-55.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
image-20241122173718-56.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content