Last modified by Dilisi S on 2025/02/26 19:24
<
From version < 4.5 >
edited by Edwin Chen
on 2024/09/16 08:54
To version < 2.1 >
edited by Edwin Chen
on 2024/09/15 23:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LTS5 LoRa HMI Touch Screen
1 +LTS5 LoRa Touch Screen
Content
... ... @@ -1,7 +1,10 @@
1 -
2 -[[image:image-20240915231842-1.png]]
1 +(% style="text-align:center" %)
2 +[[image:image-20240705094013-3.png]]
3 3  
4 4  
5 +
6 +
7 +
5 5  (% _mstvisible="1" %)
6 6  (% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
7 7  
... ... @@ -16,45 +16,58 @@
16 16  
17 17  = 1.  Introduction =
18 18  
19 -== 1.1  What is LTS5 LoRa HMI touch screen ==
22 +== 1.1  What is PB01 LoRaWAN Push Button ==
20 20  
21 -LTS5 is a (% style="color:blue" %)LoRa / LoRaWAN HMI Touch Screen(%%) designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.
22 22  
23 -LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.
25 +PB01 LoRaWAN Button is a LoRaWAN wireless device with one (% style="color:blue" %)**push button**(%%). Once user push the button, PB01 will transfer the signal to IoT server via Long Range LoRaWAN wireless protocol. PB01 also senses the (% style="color:blue" %)**environment temperature & humidity**(%%) and will also uplink these data to IoT Server.
24 24  
25 -The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the display UI for different application.
27 +PB01 supports (% style="color:blue" %)** 2 x AAA batteries**(%%) and works for a long time up to several years*. User can replace the batteries easily after they are finished.
26 26  
27 -LTS5 use LA66 LoRa module, this module can be program to support private LoRa protocol or LoRaWAN protocol.
29 +PB01 has a built-in speaker, it can pronouns different sound when press button and get reply from server. The speaker can by disable if user want it.
28 28  
31 +PB01 is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.
29 29  
33 +*Battery life depends how often to send data, please see [[battery analyzer>>||anchor="H4.2A0PowerConsumptionAnalyze"]].
34 +
35 +
30 30  == 1.2  Features ==
31 31  
32 -* Support Private LoRa protocol or LoRaWAN protocol
33 -* Support WiFi & BLE wireless protocol
34 -* 5.0" HMI touch screen
35 -* Support RS485 Interface
36 -* Open Source Project
38 +
37 37  * Wall Attachable.
38 -* 5V DC power
40 +* LoRaWAN v1.0.3 Class A protocol.
41 +* 1 x push button. Different Color available.
42 +* Built-in Temperature & Humidity sensor
43 +* Built-in speaker
44 +* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
45 +* AT Commands to change parameters
46 +* Remote configure parameters via LoRaWAN Downlink
47 +* Firmware upgradable via program port
48 +* Support 2 x AAA LR03 batteries.
39 39  * IP Rating: IP52
40 40  
41 -
42 42  == 1.3  Specification ==
43 43  
44 -**Display:**
45 45  
46 -* TFT Touch SCreen
54 +**Built-in Temperature Sensor:**
55 +
56 +* Resolution: 0.01 °C
47 47  * Accuracy Tolerance: Typ ±0.2 °C
48 48  * Long Term Drift: < 0.03 °C/yr
49 49  * Operating Range: -10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
50 50  
51 -
61 +**Built-in Humidity Sensor:**
52 52  
63 +* Resolution: 0.01 %RH
64 +* Accuracy Tolerance: Typ ±1.8 %RH
65 +* Long Term Drift: < 0.2% RH/yr
66 +* Operating Range: 0 ~~ 99.0 %RH(no Dew)
67 +
53 53  == 1.4  Power Consumption ==
54 54  
55 -* External 5V DC power adapter
56 56  
71 +PB01 : Idle: 5uA, Transmit: max 110mA
57 57  
73 +
58 58  == 1.5  Storage & Operation Temperature ==
59 59  
60 60  
... ... @@ -71,7 +71,6 @@
71 71  * Smart Cities
72 72  * Smart Factory
73 73  
74 -
75 75  = 2.  Operation Mode =
76 76  
77 77  == 2.1  How it work? ==
... ... @@ -726,6 +726,7 @@
726 726  
727 727  * **Example: **Downlink Payload: A10001  ~/~/ Set AT+SOUND=0,1  Turn off the button sound and turn on ACK sound.
728 728  
744 +
729 729  == 3.4  Set buzzer music type(0~~4) ==
730 730  
731 731  
... ... @@ -782,42 +782,337 @@
782 782  **~ Explain: **Hold the alarm button for 10 seconds before the node will send the alarm packet.
783 783  
784 784  
785 -
786 786  
802 += 4.  Battery & How to replace =
803 +
804 +== 4.1  Battery Type and replace ==
805 +
806 +
807 +PB01 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). Users can buy generic AAA battery and replace it.
808 +
809 +(% style="color:red" %)**Note: **
810 +
811 +1.  The PB01 doesn't have any screw, users can use nail to open it by the middle.
812 +
813 +[[image:image-20220621143535-5.png]]
814 +
815 +
816 +2.  Make sure the direction is correct when install the AAA batteries.
817 +
818 +[[image:image-20220621143535-6.png]]
819 +
820 +
821 +== 4.2  Power Consumption Analyze ==
822 +
823 +
824 +Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
825 +
826 +Instruction to use as below:
827 +
828 +(% style="color:blue" %)**Step 1**(%%):  Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
829 +
830 +[[battery calculator>>https://www.dropbox.com/sh/sxrgszkac4ips0q/AAA4XjBI3HAHNpdbU3ALN1j0a/Battery%20Document/Battery_Analyze?dl=0&subfolder_nav_tracking=1]]
831 +
832 +
833 +(% style="color:blue" %)**Step 2**(%%):  (% style="display:none" %) (%%)Open it and choose
834 +
835 +* Product Model
836 +* Uplink Interval
837 +* Working Mode
838 +
839 +And the Life expectation in difference case will be shown on the right.
840 +
841 +[[image:image-20220621143643-7.png||height="429" width="1326"]]
842 +
843 +
844 += 5.  Accessories =
845 +
846 +
847 +* (((
848 +(% class="wikigeneratedid" id="H5.2A0ProgramConverter28AS-0229" %)
849 +**Program Converter (AS-02)**
850 +)))
851 +
852 +AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:
853 +
854 +1. Access AT console of PB01 when used with USB-TTL adapter. [[See this link>>||anchor="H6.1HowtouseATCommandtoconfigurePB01"]].
855 +
856 +[[image:image-20220621141724-3.png]]
857 +
858 +
787 787  = 6. FAQ =
788 788  
789 -== 6.1 ==
861 +== 6.1 How to use AT Command to configure PB01 ==
790 790  
791 791  
792 -= 7. Order Info =
864 +PB01 supports AT Command set. Users can use a USB to TTL adapter plus the Program Cable to connect to PB01 for using AT command, as below.
793 793  
794 -== 7.1  Part Number ==
866 +[[image:image-20240511085914-1.png||height="570" width="602"]]
795 795  
796 -Part Number: (% style="color:#4472c4" %)LTS5
797 797  
869 +**Connection:**
870 +
871 +* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin
872 +* (% style="background-color:yellow" %)USB to TTL RXD  <~-~-> Program Converter D+ pin
873 +* (% style="background-color:yellow" %)USB to TTL TXD  <~-~-> Program Converter A11 pin
874 +
875 +(((
876 +In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for PB01. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.
877 +)))
878 +
879 +(((
880 +Input password and ATZ to activate PB01, as shown below:
881 +)))
882 +
883 +[[image:image-20240510174509-18.png||height="572" width="791"]]
884 +
885 +
886 +== 6.2  AT Command and Downlink ==
887 +
888 +
889 +(((
890 +Sending ATZ will reboot the node
891 +)))
892 +
893 +(((
894 +Sending AT+FDR will restore the node to factory settings
895 +)))
896 +
897 +(((
898 +Get the node's AT command setting by sending AT+CFG
899 +)))
900 +
901 +(((
798 798  
903 +)))
799 799  
800 -== 7.2  Packing Info ==
905 +(((
906 +**Example：**                                           
907 +)))
801 801  
802 -**Package Includes**:
909 +(((
910 +AT+DEUI=FA 23 45 55 55 55 55 51
803 803  
804 -* LTS5 HMI Touch Screen
805 -* 5V,2A DC Power Adapter.
806 -* USB Type C Program Cable
912 +AT+APPEUI=FF AA 23 45 42 42 41 11
807 807  
914 +AT+APPKEY=AC D7 35 81 63 3C B6 05 F5 69 44 99 C1 12 BA 95
808 808  
916 +AT+DADDR=FFFFFFFF
917 +
918 +AT+APPSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
919 +
920 +AT+NWKSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
921 +
922 +AT+ADR=1
923 +
924 +AT+TXP=7
925 +
926 +AT+DR=5
927 +
928 +AT+DCS=0
929 +
930 +AT+PNM=1
931 +
932 +AT+RX2FQ=869525000
933 +
934 +AT+RX2DR=0
935 +
936 +AT+RX1DL=5000
937 +
938 +AT+RX2DL=6000
939 +
940 +AT+JN1DL=5000
941 +
942 +AT+JN2DL=6000
943 +
944 +AT+NJM=1
945 +
946 +AT+NWKID=00 00 00 13
947 +
948 +AT+FCU=61
949 +
950 +AT+FCD=11
951 +
952 +AT+CLASS=A
953 +
954 +AT+NJS=1
955 +
956 +AT+RECVB=0:
957 +
958 +AT+RECV=
959 +
960 +AT+VER=EU868 v1.0.0
961 +
962 +AT+CFM=0,7,0
963 +
964 +AT+SNR=0
965 +
966 +AT+RSSI=0
967 +
968 +AT+TDC=1200000
969 +
970 +AT+PORT=2
971 +
972 +AT+PWORD=123456
973 +
974 +AT+CHS=0
975 +
976 +AT+RX1WTO=24
977 +
978 +AT+RX2WTO=6
979 +
980 +AT+DECRYPT=0
981 +
982 +AT+RJTDC=20
983 +
984 +AT+RPL=0
985 +
986 +AT+TIMESTAMP=systime= 2024/5/11 01:10:58 (1715389858)
987 +
988 +AT+LEAPSEC=18
989 +
990 +AT+SYNCMOD=1
991 +
992 +AT+SYNCTDC=10
993 +
994 +AT+SLEEP=0
995 +
996 +AT+ATDC=1
997 +
998 +AT+UUID=003C0C53013259E0
999 +
1000 +AT+DDETECT=1,1440,2880
1001 +
1002 +AT+SETMAXNBTRANS=1,0
1003 +
1004 +AT+DISFCNTCHECK=0
1005 +
1006 +AT+DISMACANS=0
1007 +
1008 +AT+PNACKMD=0
1009 +
1010 +AT+SOUND=0,0
1011 +
1012 +AT+STIME=0
1013 +
1014 +AT+OPTION=3
1015 +)))
1016 +
1017 +(((
1018 +**Example：**
1019 +)))
1020 +
1021 +[[image:image-20240511091518-2.png||height="601" width="836"]]
1022 +
1023 +
1024 +== 6.3  How to upgrade the firmware? ==
1025 +
1026 +
1027 +PB01 requires a program converter to upload images to PB01, which is used to upload image to PB01 for:
1028 +
1029 +* Support new features
1030 +* For bug fix
1031 +* Change LoRaWAN bands.
1032 +
1033 + PB01 internal program is divided into bootloader and work program, shipping is included bootloader, the user can choose to directly update the work program.
1034 +
1035 +If the bootloader is erased for some reason, users will need to download the boot program and the work program.
1036 +
1037 +
1038 +=== 6.3.1 Update firmware (Assume device have bootloader) ===
1039 +
1040 +
1041 +(% style="color:blue" %)**Step 1**(%%):** Connect UART as per FAQ 6.1**
1042 +
1043 +(% style="color:blue" %)**Step 2**(%%):** Update follow [[Instruction for update via DraginoSensorManagerUtility.exe>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]. **
1044 +
1045 +
1046 +=== 6.3.2 Update firmware (Assume device doesn't have bootloader) ===
1047 +
1048 +
1049 +Download both the boot program and the worker program** . **After update , device will have bootloader so can use above 6.3.1 method to update woke program.
1050 +
1051 +(% style="color:blue" %)**Step 1**(%%):** **Install [[TremoProgrammer>>url:https://www.dropbox.com/scl/fo/gk1rb5pnnjw4kv5m5cs0z/h?rlkey=906ouvgbvif721f9bj795vfrh&dl=0]]  first.
1052 +
1053 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220615170542-5.png?rev=1.1||alt="image-20220615170542-5.png"]]
1054 +
1055 +(% style="color:blue" %)**Step 2**(%%): Hardware Connection
1056 +
1057 +Connect PC and PB01 via USB-TTL adapter .
1058 +
1059 +(% style="color:red" %)**Note: To download firmware in this way, you need to pull the boot pin(Program Converter D- pin) high to enter the burn mode. After burning, disconnect the boot pin of the node and the 3V3 pin of the USB-TTL adapter, and reset the node to exit the burning mode.**
1060 +
1061 +**Connection:**
1062 +
1063 +* (% style="background-color:yellow" %)USB-TTL GND <~-~-> Program Converter GND pin
1064 +* (% style="background-color:yellow" %)USB-TTL RXD  <~-~-> Program Converter D+ pin
1065 +* (% style="background-color:yellow" %)USB-TTL TXD  <~-~-> Program Converter A11 pin
1066 +* (% style="background-color:yellow" %)USB-TTL 3V3 <~-~-> Program Converter D- pin
1067 +
1068 +(% style="color:blue" %)**Step 3**(%%):** **Select the device port to be connected, baud rate and bin file to be downloaded.
1069 +
1070 +[[image:image-20240701160913-1.png]]
1071 +
1072 +Users need to reset the node to start downloading the program.
1073 +~1. Reinstall the battery to reset the node
1074 +2. Hold down the ACT button to reset the node (see [[2.7>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/PB01--LoRaWAN_Button_User_Manual/#H2.7Button]] ).
1075 +
1076 +When this interface appears, it indicates that the download has been completed.
1077 +
1078 +[[image:image-20240701160924-2.png]]
1079 +
1080 +Finally, Disconnect Program Converter D- pin, reset the node again , and the node exits burning mode.
1081 +
1082 +
1083 +== 6.4  How to change the LoRa Frequency Bands/Region? ==
1084 +
1085 +
1086 +User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.
1087 +
1088 +
1089 +== 6.5 Why i see different working temperature for the device? ==
1090 +
1091 +
1092 +The working temperature range of device depends on the battery user choose.
1093 +
1094 +* Normal AAA Battery can support -10 ~~ 50°C working range.
1095 +* Special AAA battery can support -40 ~~ 60 °C working range. For example: [[Energizer L92>>https://data.energizer.com/pdfs/l92.pdf]]
1096 +
1097 += 7. Order Info =
1098 +
1099 +== 7.1  Main Device ==
1100 +
1101 +
1102 +Part Number: (% style="color:#4472c4" %)PB01-LW-XX(%%) (white button) / (% style="color:#4472c4" %)PB01-LR-XX(%%)(Red Button)
1103 +
1104 +(% style="color:#4472c4" %)**XX **(%%): The default frequency band
1105 +
1106 +* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band
1107 +* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band
1108 +* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band
1109 +* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band
1110 +* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band
1111 +* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band
1112 +* (% style="color:red" %)**IN865**(%%)**:  **LoRaWAN IN865 band
1113 +* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band
1114 +
1115 += 7. Packing Info =
1116 +
1117 +
1118 +**Package Includes**:
1119 +
1120 +* PB01 LoRaWAN Push Button x 1
1121 +
809 809  = 8. Support =
810 810  
1124 +
811 811  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
812 812  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
813 813  
814 -
815 815  = 9.  Reference material =
816 816  
817 -* Datasheet
818 -* Source Code
819 -* Mechinical
820 820  
1131 +* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/scl/fo/y7pvm58wcr8319d5o4ujr/APZtqlbzRCNbHoPWTmmMMWs?rlkey=wfh93x2dhcev3ydn0846rinf0&st=kdp6lg7t&dl=0]]
821 821  
822 822  = 10. FCC Warning =
823 823  
image-20240915231842-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -157.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0