Skip to Content
Last modified by BoYang Xie on 2025/07/24 16:47
From version 4.3
edited by Edwin Chen
on 2024/09/16 08:34
Change comment: There is no comment for this version
To version 164.2
edited by BoYang Xie
on 2025/02/07 19:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.xieby
Content
... ... @@ -1,9 +1,13 @@
1 -
2 -[[image:image-20240915231842-1.png]]
1 +
3 3  
3 +(% style="text-align:center" %)
4 +[[image:image-20241226135550-1.png]]
4 4  
6 +
7 +
8 +
5 5  (% _mstvisible="1" %)
6 -(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
10 +(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents:**
7 7  
8 8  {{toc/}}
9 9  
... ... @@ -16,22 +16,26 @@
16 16  
17 17  = 1.  Introduction =
18 18  
19 -== 1.1  What is LTS5 LoRa HMI touch screen ==
23 +== 1.1  What is the LTS5 LoRa HMI Touch Screen? ==
20 20  
21 -LTS5 is a (% style="color:blue" %)LoRa / LoRaWAN HMI Touch Screen(%%) designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.
22 22  
23 -LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.
26 +The LTS5 is a (% style="color:blue" %)**LoRa / LoRaWAN HMI Touch Screen**(%%) designed for displaying information in IoT projects. It features a **5.0-inch HMI touch screen** and supports **Wi-Fi**, **Bluetooth**, and **LoRa** wireless protocols.
24 24  
25 -The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the display UI for different application.
28 +The LTS5 is an open-source software project powered by an **ESP32 MCU** and a **Dragino LA66 LoRa** module. The extensive development resources available for ESP32 can significantly reduce development time.
26 26  
27 -LTS5 use LA66 LoRa module, this module can be program to support private LoRa protocol or LoRaWAN protocol.
30 +The LTS5's HMI touch screen supports **drag-and-drop** design, allowing developers to use SquareLine to easily customize the display UI for various applications.
28 28  
32 +The LA66 LoRa module can be programmed to support either private LoRa protocols or the LoRaWAN protocol.
29 29  
30 30  == 1.2  Features ==
31 31  
36 +
37 +* ESP32-WROOM MCU: 8MB RAM & 16MB ROM
38 +* Dragino LA66 LoRa Module
32 32  * Support Private LoRa protocol or LoRaWAN protocol
33 33  * Support WiFi & BLE wireless protocol
34 34  * 5.0" HMI touch screen
42 +* Support LVGL case. SquareLine program.
35 35  * Support RS485 Interface
36 36  * Open Source Project
37 37  * Wall Attachable.
... ... @@ -38,29 +38,51 @@
38 38  * 5V DC power
39 39  * IP Rating: IP52
40 40  
49 +== 1.3  Specifications ==
41 41  
42 -== 1.3  Specification ==
43 43  
44 -**Display:**
52 +**LoRa**:
45 45  
46 -* Resolution: 0.01 °C
47 -* Accuracy Tolerance: Typ ±0.2 °C
48 -* Long Term Drift: < 0.03 °C/yr
49 -* Operating Range: -10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
54 +* Frequency Range: 870 MHz ~~ 960 MHz
55 +* TCXO crystal to ensure RF performance on low temperature
56 +* Maximum Power +22 dBm constant RF output
57 +* High sensitivity: -148 dBm
58 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
59 +* LoRa Rx current: <9 mA
50 50  
51 -
61 +**WiFi:**
52 52  
63 +* 802.11b/g/n
64 +* Up to 150 Mbps data rate in 802.11n mode
65 +* Support A-MPDU and A-MSDU aggregation
66 +* zero point four μ S protection interval
67 +* Working channel center frequency range: 2412~~2484 MHz
68 +
69 +**Bluetooth:**
70 +
71 +* Bluetooth V4.2 BR/EDR and Bluetooth LE standard
72 +* Class-1, Class-2, and Class-3 transmitters.
73 +* AFH
74 +* CVSD and SBC
75 +
76 +**Display:**
77 +
78 +* 5.0 Inch , 800 x 480
79 +* IPS Capacitive Touch SCreen
80 +* RGB color.
81 +* Display Area: 120.7*75.80 mm
82 +
53 53  == 1.4  Power Consumption ==
54 54  
55 -* External 5V DC power.
56 56  
86 +* External 5V DC power adapter
57 57  
58 58  == 1.5  Storage & Operation Temperature ==
59 59  
60 60  
61 --10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
91 +* Operation Temperature: -20 ~~ 70°C  (No Dew)
92 +* Storage Temperature: -30 ~~ 70°C  (No Dew)
62 62  
63 -
64 64  == 1.6  Applications ==
65 65  
66 66  
... ... @@ -71,1051 +71,712 @@
71 71  * Smart Cities
72 72  * Smart Factory
73 73  
104 += 2.  Getting Started with 'Hello World' =
74 74  
75 -= 2.  Operation Mode =
106 +== 2.1  About this demo ==
76 76  
77 -== 2.1  How it work? ==
78 78  
109 +This getting started example demonstrates how to design and deploy a simple display UI for the LTS5 device. The example includes:
79 79  
80 -Each PB01 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use PB01 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if PB01 is under this LoRaWAN network coverage, PB01 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.
111 +* Creating a basic UI with a single button.
112 +* Implementing functionality to navigate the Web UI to a new page when the button is clicked.
113 +* Uploading the UI to the LTS5 device.
81 81  
115 +By completing this demo, you will gain foundational knowledge for customizing the LTS5 interface and building more advanced IoT applications.
82 82  
83 -== 2.2  How to Activate PB01? ==
84 84  
118 +== 2.2  Install Software Running Environment ==
85 85  
86 -(% style="color:red" %)** 1.  Open enclosure from below position.**
87 87  
88 -[[image:image-20220621093835-1.png]]
121 +The **ESP MCU** supports development with **ESP-IDF**, **Arduino**, or **MicroPython**. We use **ESP-IDF** for compilation and **Visual Studio Code (VS Code)** as the development environment for this project.
89 89  
90 90  
91 -(% style="color:red" %)** 2.  Insert 2 x AAA LR03 batteries and the node is activated.**
124 +=== 2.2.1 Install VS Code and ESP-IDF extension ===
92 92  
93 -[[image:image-20220621093835-2.png]]
94 94  
127 +First, download and install **VS Code** for your operating system from the Visual Studio Code website: [[Visual Studio Code - Mac, Linux, Windows>>https://code.visualstudio.com/download]].
95 95  
96 -(% style="color:red" %)** 3. Under the above conditions, users can also reactivate the node by long pressing the ACT button.**
129 +Next, install the **ESP-IDF** extension within **VS Code**. Detailed steps for this process are shown in Image 1.
97 97  
98 -[[image:image-20220621093835-3.png]]
99 99  
132 +[[image:image-20240928110211-5.png||height="508" width="866"]]
100 100  
101 -User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of PB01.
134 + Image 1: ESP-IDF extension install
102 102  
136 +Links for reference: [[Install ESP32 ESP-IDF on Windows and Integrate with VS code (esp32tutorials.com)>>url:https://esp32tutorials.com/install-esp32-esp-idf-windows-integrate-vs-code/#:~~:text=In%20this%20tutorial,%20we%20will%20show%20you%20how%20to%20install]]
103 103  
104 -== 2.3  Example to join LoRaWAN network ==
105 105  
139 +=== 2.2.2 Install SquareLine Studio ===
106 106  
107 -This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
108 108  
109 -(% _mstvisible="1" class="wikigeneratedid" %)
110 -Assume the LPS8v2 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the PB01 device in TTN V3 portal. 
142 +Download and install the latest version of [[SquareLine Studio>>https://squareline.io/downloads#lastRelease]] on your computer. It supports Windows, Linux, and Mac OS. The software version we are using here is 1.5.0. See the image below.
111 111  
112 -[[image:image-20240705094824-4.png]]
144 +[[image:squareline.io_downloads.png||height="888" width="1294"]]
113 113  
114 -(% style="color:blue" %)**Step 1**(%%):  Create a device in TTN V3 with the OTAA keys from PB01.
115 115  
116 -Each PB01 is shipped with a sticker with the default DEV EUI as below:
147 +After installation, you can use SquareLine Studio with a **PERSONAL license plan**. Click **LOG IN** and create a free account using your email address. Then activate your PERSONAL license plan for free. You don’t need to provide any credit card information. However, the PERSONAL license plan has the following limitations:
117 117  
118 -[[image:image-20230426083617-1.png||height="294" width="633"]]
149 +* Max. 10 screens
150 +* Max. 150 widgets
151 +* Max. 5 global colors
152 +* Max. 2 themes
153 +* Max. 1 component
119 119  
155 +== 2.3 Simple usage of SquareLine Studio and exporting UI code ==
120 120  
121 -Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:
122 122  
123 -Create application.
158 +Start the SquareLine Studio. The **launcher screen** appears as shown in the below image. You can create a new project by clicking **Create** in the top menu. Then select the **Desktop** tab. Select the development platform, **Eclipse with  SDL for development on PC**.
124 124  
125 -choose to create the device manually.
160 +* In the **PROJECT SETTINGS**, select **LVGL version **as **8.3.11** and **Resolution** as **800** x **480**.
161 +* Select the **CREATE **button to create the new project with the selected settings.
126 126  
127 -Add JoinEUI(AppEUI), DevEUI, AppKey.(% style="display:none" %)
163 +[[image:squareline-studio-launcher-screen.png||height="752" width="1415"]]
128 128  
129 -[[image:image-20240507142116-1.png||height="410" width="1138"]](% style="display:none" %) (%%)
130 -
131 131  
132 -[[image:image-20240507142157-2.png||height="559" width="1147"]]
166 +Next, you need to configure some additional settings for this project. To do so, select** File  -> Project Settings** as shown in the image below.
133 133  
134 -[[image:image-20240507142401-3.png||height="693" width="1202"]]
168 +[[image:1727229582471-566.png]]
135 135  
136 -[[image:image-20240507142651-4.png||height="760" width="1190"]]
137 137  
138 -**Default mode OTAA**(% style="display:none" %)
171 +In the **PROJECT SETTINGS** dialog box, configure/modify the project settings as shown in the image below.
139 139  
173 +* **UI Files Export Root**: Select a folder on your computer to store the UI files.
174 +* **LVGL Include Path**: Set this to **lvgl.h**
175 +* Click on the **APPLY CHANGES** button.
140 140  
141 -(% style="color:blue" %)**Step 2**(%%):  Use ACT button to activate PB01 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
177 +[[image:image-20240928105309-4.png||height="526" width="556"]]
142 142  
143 -[[image:image-20240507143104-5.png||height="434" width="1398"]]
144 144  
180 +Now you can start building the user interface. Follow the steps below:
145 145  
146 -== 2.4  Uplink Payload ==
147 147  
183 +=== **Add widgets** ===
148 148  
149 -Uplink payloads include two types: Valid Sensor Value and other status / control command.
150 150  
151 -* Valid Sensor Value: Use FPORT=2
152 -* Other control command: Use FPORT other than 2.
186 +To add a widget, navigate to the **Widgets** panel, and then click on the widget you want to add to the screen. You can reposition the widgets in the screen area by clicking and dragging them. Now add a **Label**, **Button**, and **Image** as shown in the image below. The added widgets are also displayed in the **Hierarchy **panel.
153 153  
154 -=== 2.4.1  Uplink FPORT~=5, Device Status ===
188 +[[image:image-20240928111412-6.png||height="526" width="864"]]
155 155  
156 156  
157 -Users can  get the Device Status uplink through the downlink command:
191 +Then click the **Screen **widget to add the second screen. After adding the second screen, it will appear in the Screens panel as **Screen2**.
158 158  
159 -(% style="color:#4472c4" %)**Downlink:  **(%%)**0x2601**
193 +[[image:Screenshot 2024-12-24 140459.png||height="278" width="290"]]
160 160  
161 -Uplink the device configures with FPORT=5.
195 +=== **Modify widget properties** ===
162 162  
163 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:370px" %)
164 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**Size(bytes)(% style="display:none" %) (%%)**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**
165 -|(% style="width:99px" %)Value|(% style="width:62px" %)Sensor Model|(% style="width:80px" %)Firmware Version|(% style="width:82px" %)Frequency Band|(% style="width:85px" %)Sub-band|(% style="width:46px" %)BAT
166 166  
167 -[[image:image-20240507152130-12.png||height="469" width="1366"]](% style="display:none" %)
198 +The area for modifying widgets is called the **Inspector** panel. The Inspector panel consists of four sections: **COMPONENT**, **<WIDGET>**, **STYLE SETTINGS**, and **EVENTS**, as shown in the image below. The second section allows you to adjust a widget's layout, size, position, alignment, flags, states, and more. When you select a widget on the screen, the name of this section changes to match the name of the selected widget.
168 168  
169 -Example Payload (FPort=5):  [[image:image-20240507152254-13.png||height="26" width="130"]]
200 +[[image:1727485118799-984.png]]
170 170  
171 171  
172 -(% style="color:#4472c4" %)**Sensor Model**(%%): For PB01, this value is 0x35.
203 +==== **Changing the Button properties** ====
173 173  
174 -(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.
175 175  
176 -(% style="color:#4472c4" %)**Frequency Band**:
206 +Click the **Button **you have added to the screen. Under the **Layout** you can change the button's position and size. Use the following settings:
177 177  
178 -*0x01: EU868
208 +* **Flex Flow**: No Layout
209 +* **Transform**:
210 +** **X**: 331 px
211 +** **Y**: 203 px
212 +** **Width**: 100 px
213 +** **Height**: 50 px
214 +** **Align**: CENTER
179 179  
180 -*0x02: US915
216 +[[image:1727485251053-655.png]]
181 181  
182 -*0x03: IN865
183 183  
184 -*0x04: AU915
219 +Next, add a click event to the button. When the button is clicked, an event should trigger to change the current screen (Screen1) to a new screen (Screen2) with a fade effect and the transition from Screen1 to Screen2 should take 500ms.
185 185  
186 -*0x05: KZ865
221 +* Click **ADD EVENT** button. A new section will appear to configure this event.
187 187  
188 -*0x06: RU864
223 +[[image:Screenshot 2024-12-24 134937.png||height="80" width="290"]]
189 189  
190 -*0x07: AS923
225 +* Select **CLICKED** from the dropdown under **Trigger**. Choose **CHANGE SCREEN** under **Action**, then click the **ADD** button. A new section will appear to configure the action.
191 191  
192 -*0x08: AS923-1
227 +[[image:Screenshot 2024-12-24 134818.png||height="222" width="290"]]
193 193  
194 -*0x09: AS923-2
229 +* Select **Screen2** under **Screen to**. Select **FADE ON** from **Fade mode**. The default value **500** means the transition takes 500 milliseconds to appear the Screen2.
230 +* Finally, click the **ADD** button.
195 195  
196 -*0x0a: AS923-3
232 +[[image:1727485480434-713.png||height="395" width="290"]]
197 197  
234 + Image 8: Add an event for the button
198 198  
199 -(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
200 200  
201 -(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for PB01.
237 +==== **Changing the label properties** ====
202 202  
203 -(% style="color:#4472c4" %)**Ex1**(%%): 0x0C DE = 3294mV
204 204  
240 +Click the Label you have added to the screen. Under the **Label** section, type "**Click for Detail**" in the **Text** textbox.
205 205  
206 -=== 2.4.2  Uplink FPORT~=2, Real time sensor value ===
242 +[[image:image-20240928090825-1.png||height="327" width="391"]]
207 207  
208 208  
209 -PB01 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].
245 +Once you enter the text, it will immediately appear on the label.
210 210  
211 -Uplink uses FPORT=2 and every 20 minutes send one uplink by default.
212 212  
213 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460px" %)
214 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
215 -**Size(bytes)**
216 -)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)2|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
217 -**1**
218 -)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
219 -**1**
220 -)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)(((
221 -**2**
222 -)))|=(% style="width: 40px;background-color:#4F81BD;color:white" %)(((
223 -**2**
224 -)))
225 -|(% style="width:97px" %)(((
226 -Value
227 -)))|(% style="width:39px" %)Battery|(% style="width:39px" %)(((
228 -Sound_ACK
248 +==== **Changing image properties** ====
229 229  
230 -&Sound_key
231 -)))|(% style="width:100px" %)(((
232 -(((
233 -Alarm
234 -)))
235 -)))|(% style="width:77px" %)(((
236 -(((
237 -Temperature
238 -)))
239 -)))|(% style="width:47px" %)(((
240 -Humidity
241 -)))
242 242  
243 -Example in TTN.
251 +To use the **Image **widget, you should first add an image to your project. The image format must be PNG, and its resolution should not exceed 800x480 pixels. There are two ways to add an image file.
244 244  
245 -[[image:image-20240507150155-11.png||height="549" width="1261"]]
253 +One way is to move your image into the folder "…/squareline project/assets/", as shown in the image below.
246 246  
247 -Example Payload (FPort=2):  (% style="background-color:yellow" %)**0C EA 03 01 01 11 02 A8**
255 +[[image:image-20240928113424-9.png||height="355" width="505"]]
248 248  
249 -==== (% style="color:blue" %)**Battery:**(%%) ====
250 250  
251 -Check the battery voltage.
258 +The other way is to click the "**ADD FILE INTO ASSETS**" button, then select an image from your computer to import. After adding, you can see the image in the "**assets**" panel in SquareLine Studio, as shown in the image below.
252 252  
253 -* Ex1: 0x0CEA = 3306mV
254 -* Ex2: 0x0D08 = 3336mV
260 +[[image:image-20240928114139-10.png||height="559" width="810"]]
255 255  
256 -==== (% style="color:blue" %)**Sound_ACK & Sound_key:**(%%) ====
257 257  
258 -Key sound and ACK sound are enabled by default.
263 +==== **The relationship between widgets** ====
259 259  
260 -* Example1: 0x03
261 261  
262 - Sound_ACK: (03>>1) & 0x01=1, OPEN.
266 +Widgets commonly have two types of relationships: **parallel** and **parent-child**.
263 263  
264 -**~ ** Sound_key:  03 & 0x01=1, OPEN.
268 +* In a **parallel relationship**, widgets' positions are determined relative to a shared reference object.
269 +* In a **parent-child relationship**, any part of the child object outside the parent's boundaries is hidden by default. To make the child object fully visible, you must adjust its position to fit within the parent's range.
265 265  
266 -* Example2: 0x01
271 +[[image:1727486567182-334.png||height="318" width="278"]]
267 267  
268 - Sound_ACK: (01>>1) & 0x01=0, CLOSE.
269 269  
270 -**~ ** Sound_key:  01 & 0x01=1, OPEN.
274 +Move the label, **Label1** to make it a child of **Button1** as shown in the image below.
271 271  
276 +[[image:image-20240928112001-8.png||height="431" width="796"]]
272 272  
273 -==== (% style="color:blue" %)**Alarm:**(%%) ====
274 274  
275 -Key alarm.
279 +Then set the **X** and **Y** position of the label to **0** as shown in the image below. The label will appear on the button. If you move the button on the screen, the label will move along with it as part of the button.
276 276  
277 -* Ex1: 0x01 & 0x01=1, TRUE.
278 -* Ex2: 0x00 & 0x01=0, FALSE.
281 +[[image:Screenshot 2024-12-24 144005.png||height="360" width="290"]]
279 279  
280 -==== (% style="color:blue" %)**Temperature:**(%%) ====
281 281  
282 -* Example1:  0x0111/10=27.3℃
283 -* Example2:  (0xFF0D-65536)/10=-24.3℃
284 +==== **Preview the screen** ====
284 284  
285 -If payload is: FF0D :  (FF0D & 8000 == 1) , temp = (FF0D - 65536)/100 =-24.3℃
286 286  
287 -（FF0D & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
287 +You can test the result by clicking on the **PLAY** button as shown in the image below. The screen will change into play mode.
288 288  
289 +[[image:1727487368023-281.png]]
289 289  
290 -==== (% style="color:blue" %)**Humidity:**(%%) ====
291 291  
292 -* Humidity:    0x02A8/10=68.0%
292 +For more information, please visit the official link: [[SquareLine Studio 1.4.2 Documentation ~| SquareLine Studio>>url:https://docs.squareline.io/docs/squareline/]].
293 293  
294 -=== 2.4.3  Uplink FPORT~=3, Datalog sensor value ===
295 295  
295 +== 2.4 Integrate UI Code to ESP-IDF Project ==
296 296  
297 -PB01 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.
298 298  
299 -[[image:image-20240510144912-1.png||height="471" width="1178"]](% style="display:none" %)
298 +To integrate, first export the UI code, then make some modifications, and finally relocate the UI code to a specific position within the project.
300 300  
300 +On the  menubar, click **Export -> Export UI** Files as shown in the image below.
301 301  
302 -* Each data entry is 11 bytes, to save airtime and battery, PB01 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)
302 +[[image:1727229798126-306.png]]
303 303  
304 -For example, in US915 band, the max payload for different DR is:
305 305  
306 -1. **DR0**: max is 11 bytes so one entry of data
307 -1. **DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
308 -1. **DR2**: total payload includes 11 entries of data
309 -1. **DR3**: total payload includes 22 entries of data.
305 +The exported UI files can be found in your SquareLine project folder as shown in the image below.
310 310  
311 -(% style="color:red" %)**Notice: PB01 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**
312 312  
313 -See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].
308 +[[image:1727229821582-258.png||height="333" width="662"]]
314 314  
315 -(% style="display:none" %) (%%)
316 316  
317 -=== 2.4.4  Decoder in TTN V3 ===
311 +Create a new folder named "**ui**" at path "**basic_prj/app_components/ui/**", and copy all the exported UI code into it as shown in the image below.
318 318  
313 +[[image:image-20240928144830-11.png]]
319 319  
320 -In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.
321 321  
322 -In TTN , add formatter as below:
316 +Open the **CMakeLists.txt** file and edit it as ahown below.
323 323  
324 -[[image:image-20240507162814-16.png||height="778" width="1135"]]
318 +[[image:1727229892636-154.png||height="521" width="407"]]
325 325  
326 -(((
327 -Please check the decoder from this link:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
328 -)))
329 329  
330 -(((
331 -
332 -)))
321 +Open the main.c file and  add two lines of code as shown in the below images.
333 333  
334 -== 2.5 Show data on Datacake ==
323 +Add **#include "ui.h"**
335 335  
325 +[[image:1727229926561-300.png]]
336 336  
337 -(((
338 -Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
339 -)))
340 340  
341 -(((
342 -
343 -)))
328 +Add **ui_init();**
344 344  
345 -(((
346 -(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the LoRaWAN network.
347 -)))
330 +[[image:1727229955611-607.png]]
348 348  
349 -(((
350 -(% style="color:blue" %)**Step 2**(%%):  Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
351 -)))
352 352  
353 -(((
354 -~1. Add Datacake:
355 -)))
333 +== 2.5 Brief introduction to the Hello World project ==
356 356  
357 -(((
358 -2. Select default key as Access Key:
359 -)))
360 360  
361 -(((
362 -3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add PB01:
363 -)))
336 +The project consists of two screens. The first screen displays the company's logo, the project name, and a button to navigate to the next screen. The second screen provides information about the HMI screen product through an image and includes a button to return to the previous screen.
364 364  
365 -(((
366 - Please refer to the figure below.
367 -)))
368 368  
369 -[[image:image-20240510150924-2.png||height="612" width="1186"]]
339 +== 2.6 Test Result ==
370 370  
371 371  
372 -Log in to DATACAKE, copy the API under the account.
342 +By pressing the button located at the bottom right, the screen switches to the next one as expected. This confirms that the UI file has been successfully integrated into the project and is functioning correctly.
373 373  
374 -[[image:image-20240510151944-3.png||height="581" width="1191"]]
344 +Screen 1:
375 375  
346 +[[image:1727488067077-684.png||height="402" width="574"]]
376 376  
377 377  
378 -[[image:image-20240510152150-4.png||height="697" width="1188"]]
349 +Screen 2:
379 379  
351 +[[image:1727488157579-949.png||height="397" width="572"]]
380 380  
381 -[[image:image-20240510152300-5.png||height="298" width="1191"]]
382 382  
354 += 3. Example Project 1: LoRa Central Display =
383 383  
384 -[[image:image-20240510152355-6.png||height="782" width="1193"]]
356 +[[image:image-20240916101737-1.png||height="468" width="683"]]
385 385  
386 -[[image:image-20240510152542-8.png||height="545" width="739"]]
387 387  
388 -[[image:image-20240510152634-9.png||height="748" width="740"]]
359 += 4. Example Project 2: LoRaWAN RS485 Alarm =
389 389  
361 += 5. Example Project 3: P2P =
390 390  
391 -[[image:image-20240510152809-10.png||height="607" width="732"]]
363 +The project achieves the function of receiving LoRa P2P messages and displaying them on the screen. The workflow is as follows: A LA66, running a P2P program, sends a message in a particular format via an AT command. Then, the LTS5 receives the message and displays it on the screen.
392 392  
393 -[[image:image-20240510153934-14.png||height="460" width="1199"]]
365 +The project can be found at [[this link>>url:https://github.com/dragino/LoRa-HMI-Touch-Screen/tree/main/Example/P2P]].
394 394  
367 +== 5.1 firmware flashing approach. ==
395 395  
396 -[[image:image-20240510153435-12.png||height="428" width="1197"]]
369 +5.1.1 Download this project
397 397  
371 +5.1.2 Download esp32 firmware flash tool in [[this link>>https://docs.espressif.com/projects/esp-test-tools/en/latest/esp32/production_stage/tools/flash_download_tool.html]].
398 398  
399 -Copy and paste the [[TTN decoder>>https://github.com/dragino/dragino-end-node-decoder]] here and save.
373 +5.1.3 Download la66 firmware flash tool in [[this link>>https://www.dropbox.com/scl/fo/9kqeqf6wmet10o9hgxuwa/h?rlkey=4ikrg6kg5v0yjxwhp0i37wrv7&e=1&dl=0]].
400 400  
401 -[[image:image-20240510153624-13.png||height="468" width="1195"]]
375 +5.1.4 Upload firmware to esp32
402 402  
377 +Open flash_download_tool.exe, and then follow the steps below.
403 403  
404 -Visual widgets please read the DATACAKE documentation.
379 +[[image:1738893226894-758.png||height="170" width="176"]]
405 405  
406 -(% style="display:none" %) (%%)
381 +[[image:image-20250207100150-7.png||height="476" width="538"]]
407 407  
408 -== 2.6  Datalog Feature ==
383 +5.1.5 Upload firmware to la66
409 409  
385 +Open Dragino_Sensor_Manager_Utility.exe, and then follow the steps below.
410 410  
411 -(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
412 -When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.
387 +[[image:image-20250207101415-8.png||height="522" width="618"]]
413 413  
389 +[[image:image-20250207101515-9.png||height="522" width="618"]]
414 414  
415 -=== 2.6.1  Unix TimeStamp ===
391 +== 5.2 AT command and P2P data format ==
416 416  
393 +AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**01**A4CBBB0A8E085C02,0,3
417 417  
418 -Unix TimeStamp shows the sampling time of uplink payload. format base on
395 +AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**02**A4CB00,0,3
419 419  
420 -[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
397 +AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**03**A4CB00,0,3
421 421  
422 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
399 +AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**04**A4CB00,0,3
423 423  
424 -For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)
401 +AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**05**A4CB00,0,3
425 425  
403 +AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**06**A4CB00,0,3
426 426  
427 -[[image:1655782409139-256.png]]
405 +**Data format**:
428 428  
407 +~1. AT+SEND=1,**01** **4b69746368656e2d467269676531FFFF A84041000181D4A8 01  A4CB  BB0A  8E08  5C02**,0,3
429 429  
430 -=== 2.6.2  Poll sensor value ===
409 +**01:** encrypt. 1 Byte. 01 ~-~-> no encryption. This 1-byte information is now invalid; simply write 0x01 instead.
431 431  
411 +**4b69746368656e2d467269676531FFFF: **Device Name. 16 Bytes. The Device Name for this piece of information is "Kitchen-Frige1," and the subsequent "FFFF" is intended to pad it up to 16 Bytes. The Device Name for this piece of information is 'Kitchen-Frige1,' and the subsequent 'FFFF' is intended to pad it up to 16 Bytes, but it is not necessary as the system can handle shorter names as well.
432 432  
433 -(((
434 -User can poll sensor value based on timestamps from the server. Below is the downlink command.
435 -)))
413 +**A84041000181D4A8:** Device EUI. 8 Bytes. The last three Bytes will be extracted by the ESP32-S3 and displayed on the screen.
436 436  
437 -(((
438 -Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
439 -)))
415 +**01: **Panel Type. 1 Byte. 0x01~-~->Tem & Hum,
440 440  
441 -(((
442 -For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)
443 -)))
417 + 0x02~-~->Door,
444 444  
445 -(((
446 -Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data
447 -)))
419 + 0x03~-~->Water Leak,
448 448  
449 -(((
450 -Uplink Internal =5s，means PB01 will send one packet every 5s. range 5~~255s.
451 -)))
421 + 0x04~-~->Occupied,
452 452  
423 + 0x05~-~->Button,
453 453  
454 -=== 2.6.3  Datalog Uplink payload ===
425 + 0x06~-~->Alarm,
455 455  
427 +**A4CB: **Battery level//. //2 Bytes. Battery Voltage =0xCBA4&0x3FFF=0x0BA4=2980mV
456 456  
457 -See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]
429 +**BB0A: **The temperature of the built-in sensor in LHT65N.// //2 Bytes. Temperature:  0x0ABB/100=27.47℃
458 458  
459 -(% style="display:none" %) (%%) (% style="display:none" %)
431 +**8E08: **The temperature of the External temperature sensor.// //2 Bytes. Temperature:  0x088E/100=21.90℃
460 460  
461 -== 2.7 Button ==
433 +**5C02：**The humidity of the built-in sensor in LHT65N. 2 Bytes. Humidity: 0x025C/10=60.4%
462 462  
435 +2. AT+SEND=1,**01**  **4b69746368656e2d467269676531FFFF**  **A84041000181D4A8**  **02  A4CB  00**,0,3
463 463  
464 -* ACT button
437 +Specific sections of the data share the same function.
465 465  
466 -Long press this button PB01 will reset and join network again.
439 +**00: Status. **1 Byte//. //If Panel Type is 0x02, **Status: 00~-~->Open; 01~-~->Close.**
467 467  
468 -[[image:image-20240510161626-17.png||height="192" width="224"]]
441 + If Panel Type is 0x03, **Status: 00~-~->Normal; 01~-~->Water Leaking.**
469 469  
470 -* Alarm button
443 + If Panel Type is 0x04, **Status: 00~-~->Free; 01~-~->Occupied.**
471 471  
472 -Press the button PB01 will immediately uplink data, and alarm is "TRUE".
445 + If Panel Type is 0x05, **Status: 00~-~->OFF; 01~-~->ON.**
473 473  
474 -[[image:image-20240705095149-5.png||height="164" width="162"]](% style="display:none" %)
447 + If Panel Type is 0x06, **Status: 00~-~->OFF; 01~-~->Alarm.**
475 475  
449 +== 5.3 Usage ==
476 476  
477 -== 2.8 LED Indicator ==
451 +After burning the firmware into LTS5, you can use an LA66 equipped with peer-to-peer firmware to send data to LTS5 via AT commands.
478 478  
453 +5.3.1 Connect LA66 to the computer, open Serial Port Utility, and send the AT+CFG instruction to check whether the LA66 has downloaded correct program.
479 479  
480 -(((
481 -The PB01 has a triple color LED which for easy showing different stage.
482 -)))
455 +[[image:image-20250207143131-11.png||height="527" width="547"]]
483 483  
484 -Hold the ACT green light to rest, then the green flashing node restarts, the blue flashing once upon request for network access, and the green constant light for 5 seconds after successful network access
457 +5.3.2 Copy an AT instruction example, click "Send" button, then the led in LA66 will flash and the LTS5 will display the LoRa information.
485 485  
486 -(((
487 -(% style="color:#037691" %)**In a normal working state**:
488 -)))
459 +[[image:image-20250207144605-12.png||height="634" width="548"]]
489 489  
490 -* When the node is restarted, hold the ACT (% style="color:green" %)**GREEN**(%%) lights up , then the (% style="color:green" %)**GREEN**(%%) flashing node restarts.The (% style="color:blue" %)**BLUE**(%%) flashing once upon request for network access, and the (% style="color:green" %)**GREEN**(%%) constant light for 5 seconds after successful network access(% style="color:#0000ff" %)**.**
491 -* During OTAA Join:
492 -** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.
493 -** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.
494 -* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.
495 -* Press the alarm button，The (% style="color:red" %)**RED**(%%) flashes until the node receives the ACK from the platform and the (% style="color:blue" %)**BLUE**(%%) light stays 5s.
461 += 6. Example Project 4: LoRaWAN_CLASS_C =
496 496  
497 -(((
498 -
499 -)))
500 500  
501 -== 2.9 Buzzer ==
464 +The project achieves the function of receiving LoRaWAN Class C messages and displaying them on the screen. Note: The Things Network (TTN) needs to enable Class C support, and the LA66 within the LTS5 needs to operate in Class C mode.
502 502  
466 +The downlink workflow proceeds as follows: The Things Network (TTN) sends a message in a specific format via downlink. Then, a LoRaWAN gateway relays this message to the LTS5. Finally, the LTS5 receives the message and displays it on its screen.
503 503  
504 -The PB01 has** button sound** and** ACK sound** and users can turn on or off both sounds by using [[AT+SOUND>>||anchor="H3.3A0Setbuttonsoundandbuttonalarm"]].
468 +The uplink workflow is as follows: The LA66 within the LTS5 sends a LoRaWAN message, for some reason, to a LoRaWAN gateway, which then forwards it to The Things Network (TTN).
505 505  
506 -* (% style="color:#4f81bd" %)**Button sound**(%%)** **is the music produced by the node after the alarm button is pressed.
470 +The project can be found at [[this link>>https://github.com/dragino/LoRa-HMI-Touch-Screen/tree/main/Example/LoRaWAN_CLASS_C]].
507 507  
508 - Users can use[[ AT+OPTION>>||anchor="H3.4A0Setbuzzermusic2807E429"]] to set different button sounds.
472 +== 6.1 firmware flashing approach ==
509 509  
510 -* (% style="color:#4f81bd" %)**ACK sound **(%%)is the notification tone that the node receives ACK.
474 +The firmware flashing approach is the same as described in section [[5.1>>5.1]].
511 511  
512 -= 3.  Configure PB01 via AT command or LoRaWAN downlink =
476 +== 6.2 flowchart ==
513 513  
478 +[[image:image-20250207164320-13.png||height="696" width="1344"]]
514 514  
515 -Users can configure PB01 via AT Command or LoRaWAN Downlink.
480 +== 6.3 Usage ==
516 516  
517 -* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
482 +6.3.1 TTN downlink panel data to display in LTS5
518 518  
519 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
484 +6.3.1 Connect LA66 to the computer, open Serial Port Utility, and send the AT+CFG instruction to check whether the LA66 has downloaded correct program.
520 520  
521 -There are two kinds of commands to configure PB01, they are:
486 +[[image:image-20250207165702-14.png||height="830" width="563"]]
522 522  
523 -* (% style="color:#4f81bd" %)**General Commands:**
488 +6.3.2 Switch to Class C using "AT+CLASS=C", and check the class with "AT+CLASS=?".
524 524  
525 -These commands are to configure:
490 +[[image:image-20250207173212-27.png]]
526 526  
527 -* General system settings like: uplink interval.
492 +[[image:image-20250207172246-20.png]]
528 528  
529 -* LoRaWAN protocol & radio-related commands.
494 +6.3.3 Verify LA66's join status (in LTS5) with "AT+NJS=?". If not joined, connect manually to LoRaWAN with "AT+JOIN".
530 530  
531 -They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
496 +[[image:image-20250207172010-19.png]]
532 532  
498 +[[image:image-20250207171650-17.png]]
533 533  
534 -* (% style="color:#4f81bd" %)**Commands special design for PB01**
500 +6.3.4 After joining, send a message to TTN, such as "AT+SENDB=01,02,8,05820802581ea0a5", to activate communication.
535 535  
536 -These commands are only valid for PB01, as below:
502 +[[image:image-20250207192107-28.png]]
537 537  
538 -(% style="display:none" %) (%%)
504 +6.3.5 TTN distributes panel data in three batches.
539 539  
540 -== 3.1  Downlink Command Set ==
506 +1. downlink DEUI F1A84041000181D4A8
507 +1. downlink Dev Name F24B69746368656E2D467269676531FFFF
508 +1. downlink Sensor Data 5501A4CBBB0A8E085C02 或 5504A4CB01
541 541  
510 += 5. The method for adding a new type of panel to the project =
542 542  
543 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
544 -|=(% style="width: 130px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 151px; background-color: rgb(79, 129, 189); color: white;" %)**Function**|=(% style="width: 92px; background-color: rgb(79, 129, 189); color: white;" %)**Response**|=(% style="width: 206px; background-color: rgb(79, 129, 189); color: white;" %)**Downlink**
545 -|(% style="width:130px" %)AT+TDC=?|(% style="width:151px" %)(((
546 -
512 +If you don't have this need, then this part of the content can be ignored.
547 547  
548 -View current TDC time
549 -)))|(% style="width:92px" %)(((
550 -1200000
551 -OK
552 -)))|(% style="width:206px" %)Default 1200000(ms)
553 -|(% style="width:130px" %)AT+TDC=300000|(% style="width:151px" %)Set TDC time|(% style="width:92px" %)OK|(% style="width:206px" %)(((
554 -(((
555 -0X0100012C:
556 -01: fixed command
557 -00012C: 0X00012C=
514 +1. Design a panel in SquareLine Studio, as shown in Image 5.1 below for reference.
558 558  
559 -300(seconds)
560 -)))
516 +[[image:image-20241121113445-1.png||height="584" width="934"]]
561 561  
562 -(((
563 -
564 -)))
565 -)))
566 -|(% style="width:130px" %)ATZ|(% style="width:151px" %)Reset node|(% style="width:92px" %) |(% style="width:206px" %)0x04FF
567 -|(% style="width:130px" %)AT+FDR|(% style="width:151px" %)Restore factory settings|(% style="width:92px" %) |(% style="width:206px" %)0X04FE
568 -|(% style="width:130px" %)AT+CFM=?|(% style="width:151px" %)View the current confirmation mode status|(% style="width:92px" %)(((
569 -0,7,0
518 + Image 5.1: a panel about water_leak
570 570  
571 -OK
572 -)))|(% style="width:206px" %)Default 0,7,0
573 -|(% style="width:130px" %)AT+CFM=1,7,1|(% style="width:151px" %)(((
574 -Confirmed uplink mode, the maximum number of retries is seven, and uplink fcnt increase by 1 for each retry
575 -)))|(% style="width:92px" %)(((
576 -OK
577 -)))|(% style="width:206px" %)(((
578 -05010701
579 579  
580 -05: fixed command
521 +2. **Export the UI file: **You need to adjust the export path first, then click '**Export -> Export UI Files**' on the menu bar. This step was introduced earlier. After that, you can get the UI files as shown in Image 5.2.
581 581  
582 -01:confirmed uplink
523 +[[image:image-20241121141120-4.png||height="383" width="795"]]
583 583  
584 -07: retry 7 times
525 + Image 5.2: Exported UI files
585 585  
586 -01: fcnt count plus 1
587 -)))
588 -|(% style="width:130px" %)AT+NJM=?|(% style="width:151px" %)(((
589 -Check the current network connection method
590 -)))|(% style="width:92px" %)(((
591 -1
592 -OK
593 -)))|(% style="width:206px" %)Default 1
594 -|(% style="width:130px" %)AT+NJM=0|(% style="width:151px" %)Change the network connection method to ABP|(% style="width:92px" %)(((
595 -Attention:Take effect after ATZ
596 -OK
597 -)))|(% style="width:206px" %)(((
598 -0X2000: ABP
599 -0x2001: OTAA
600 -20: fixed command
601 -)))
602 -|(% style="width:130px" %)AT+RPL=?|(% style="width:151px" %)View current RPL settings|(% style="width:92px" %)(((
603 -0
604 -OK
605 -)))|(% style="width:206px" %)Default 0
606 -|(% style="width:130px" %)AT+RPL=1|(% style="width:151px" %)set RPL=1    |(% style="width:92px" %)OK|(% style="width:206px" %)(((
607 -0x2101:
608 -21: fixed command
609 -01: for details, check wiki
610 -)))
611 -|(% style="width:130px" %)AT+ADR=?|(% style="width:151px" %)View current ADR status|(% style="width:92px" %)(((
612 -1
613 -OK
614 -)))|(% style="width:206px" %)Default 0
615 -|(% style="width:130px" %)AT+ADR=0|(% style="width:151px" %)Set the ADR state to off|(% style="width:92px" %)OK|(% style="width:206px" %)(((
616 -0x2200: close
617 -0x2201: open
618 -22: fixed command
619 -)))
620 -|(% style="width:130px" %)AT+DR=?|(% style="width:151px" %)View the current DR settings|(% style="width:92px" %)OK|(% style="width:206px" %)
621 -|(% style="width:130px" %)AT+DR=1|(% style="width:151px" %)(((
622 -set DR to 1
623 -It takes effect only when ADR=0
624 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
625 -0X22000101:
626 -00: ADR=0
627 -01: DR=1
628 -01: TXP=1
629 -22: fixed command
630 -)))
631 -|(% style="width:130px" %)AT+TXP=?|(% style="width:151px" %)View the current TXP|(% style="width:92px" %)OK|(% style="width:206px" %)
632 -|(% style="width:130px" %)AT+TXP=1|(% style="width:151px" %)(((
633 -set TXP to 1
634 -It takes effect only when ADR=0
635 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
636 -0X22000101:
637 -00: ADR=0
638 -01: DR=1
639 -01: TXP=1
640 -22: fixed command
641 -)))
642 -|(% style="width:130px" %)AT+RJTDC=10|(% style="width:151px" %)Set RJTDC time interval|(% style="width:92px" %)OK|(% style="width:206px" %)(((
643 -0X26000A:
644 -26: fixed command
645 -000A: 0X000A=10(min)
646 -for details, check wiki
647 -)))
648 -|(% style="width:130px" %) |(% style="width:151px" %)(((
649 -(((
650 -~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
651 651  
652 -Retrieve stored data for a specified period of time
653 -)))
528 +3. **Delete and rename some file.** Here are the steps:
654 654  
655 -(((
656 -
657 -)))
658 -)))|(% style="width:92px" %) |(% style="width:206px" %)(((
659 -0X3161DE7C7061DE8A800A:
660 -31: fixed command
661 -61DE7C70:0X61DE7C70=2022/1/12 15:00:00
662 -61DE8A80:0X61DE8A80=2022/1/12 16:00:00
663 -0A: 0X0A=10(second)
664 -View details 2.6.2
665 -)))
666 -|(% style="width:130px" %)AT+DDETECT=?|(% style="width:151px" %)View the current DDETECT setting status and time|(% style="width:92px" %)(((
667 -1,1440,2880
668 -OK
669 -)))|(% style="width:206px" %)Default 1,1440,2880(min)
670 -|(% style="width:130px" %)AT+DDETECT=(((
671 -1,1440,2880
672 -)))|(% style="width:151px" %)(((
673 -Set DDETECT setting status and time
674 -((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))
675 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
676 -0X320005A0: close
677 -0X320105A0: open
678 -32: fixed command
679 -05A0: 0X05A0=1440(min)
680 -)))
530 + Step 1: Delete the 'components' directory.
531 + Step 2: Delete 'filelist.txt'.
532 + Step 3: Delete 'ui_helpers.c' and 'ui_helpers.h'.
533 + Step 4: Rename 'ui_ScreenMain.c' in the 'screens' directory to 'ui_water_leak_style.c'.
534 + Step 5: Rename the 'screens' directory to 'styles'.
681 681  
682 -== 3.2  Set Password ==
536 +[[image:image-20241121151934-10.png||height="303" width="792"]]
683 683  
538 + image 5.3 rest file (1)
684 684  
685 -Feature: Set device password, max 9 digits.
540 +[[image:image-20241121142925-7.png||height="141" width="793"]]
686 686  
687 -(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
542 + image 5.4 rest file (2)
688 688  
689 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
690 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
691 -|(% style="width:155px" %)AT+PWORD=?|(% style="width:124px" %)Show password|(% style="width:86px" %)(((
692 -123456
693 -OK
694 -)))
695 -|(% style="width:155px" %)AT+PWORD=999999|(% style="width:124px" %)Set password|(% style="width:86px" %)OK
544 +4. Open the project in **VS Code**.
696 696  
697 -(% style="color:#4f81bd" %)**Downlink Command:**
546 +5. Add the file include path for **water_leak** in **extra_lib/CMakeLists.txt**, as shown in Images 5.5 and 5.6. Its format is similar to that of **tem_hum** or **door**."
698 698  
699 -No downlink command for this feature.
548 +[[image:image-20241121181957-17.png||height="438" width="516"]]
700 700  
550 + image 5.5 extra_lib/CMakeLists.txt before add
701 701  
702 -== 3.3  Set button sound and ACK sound ==
552 +[[image:image-20241121182239-18.png||height="520" width="518"]]
703 703  
554 + image 5.6 extra_lib/CMakeLists.txt after add
704 704  
705 -Feature: Turn on/off button sound and ACK alarm.
556 +6.  **Modify the header files included in the fonts and images directories**.
706 706  
707 -(% style="color:#4f81bd" %)**AT Command: AT+SOUND**
558 +Open the **fonts/ui_font_Font12.c** file, as shown in Image 5.7, and change **#include "../ui.h"** to **#include "../ui_water_leak.h"**. The modified file is shown in Image 5.8. Other font files need to be modified in the same way.
708 708  
709 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
710 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
711 -|(% style="width:155px" %)(((
712 -AT+SOUND=?
713 -)))|(% style="width:124px" %)Get the current status of button sound and ACK sound|(% style="width:86px" %)(((
714 -1,1
715 -OK
716 -)))
717 -|(% style="width:155px" %)(((
718 -AT+SOUND=0,1
719 -)))|(% style="width:124px" %)Turn off the button sound and turn on ACK sound|(% style="width:86px" %)OK
560 +[[image:image-20241121171629-11.png]]
720 720  
721 -(% style="color:#4f81bd" %)**Downlink Command: 0xA1 **
562 + image 5.7 before-modified font file
722 722  
723 -Format: Command Code (0xA1) followed by 2 bytes mode value.
564 +[[image:image-20241121171901-12.png]]
724 724  
725 -The first byte after 0XA1 sets the button sound, and the second byte after 0XA1 sets the ACK sound.** (0: off, 1: on)**
566 + image 5.8 modified font file
726 726  
727 -* **Example: **Downlink Payload: A10001  ~/~/ Set AT+SOUND=0,1  Turn off the button sound and turn on ACK sound.
568 +Open the **images/ui_img_battery_empty_png.c** file, as shown in Image 5.9, and change **#include "../ui.h"** to **#include "../ui_water_leak.h"**. The modified file is shown in Image 5.10. Other image files need to be modified in the same way.
728 728  
729 -== 3.4  Set buzzer music type(0~~4) ==
570 +[[image:image-20241121172714-13.png]]
730 730  
572 + image 5.9 before-modified image file
731 731  
732 -Feature: Set different alarm key response sounds.There are five different types of button music.
574 +[[image:image-20241121172908-14.png]]
733 733  
734 -(% style="color:#4f81bd" %)**AT Command: AT+OPTION**
576 + image 5.10 modified image file
735 735  
736 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
737 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
738 -|(% style="width:155px" %)(((
739 -AT+OPTION=?
740 -)))|(% style="width:124px" %)(((
741 -Get the buzzer music type
742 -)))|(% style="width:86px" %)(((
743 -3
578 +7. Modify the **ui_water_leak/CMakeLists.txt**. Open this file, and modify it as shown in image 5.11 (before) and image 5.12 (after).
744 744  
745 -OK
746 -)))
747 -|(% style="width:155px" %)AT+OPTION=1|(% style="width:124px" %)Set the buzzer music to type 1|(% style="width:86px" %)OK
580 +[[image:image-20241121180030-15.png]]
748 748  
749 -(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
582 + image 5.11 ui_water_leak/CMakeLists.txt before modification
750 750  
751 -Format: Command Code (0xA3) followed by 1 byte mode value.
584 +[[image:image-20241121180517-16.png]]
752 752  
753 -* **Example: **Downlink Payload: A300  ~/~/ Set AT+OPTION=0  Set the buzzer music to type 0.
586 + image 5.12 ui_water_leak/CMakeLists.txt after modification
754 754  
755 -== 3.5  Set Valid Push Time ==
756 756  
589 +8. Modify the **ui_water_leak.h** file. Images 5.13 and 5.14 show the code before modification, while Images 5.15 and 5.16 show the code after modification.
757 757  
758 -Feature: Set the holding time for pressing the alarm button to avoid miscontact. Values range from** 0 ~~1000ms**.
591 +[[image:image-20241122094200-23.png]]
759 759  
760 -(% style="color:#4f81bd" %)**AT Command: AT+STIME**
593 + image 5.13 ui_water_leak.h (1) before modification
761 761  
762 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
763 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
764 -|(% style="width:155px" %)(((
765 -AT+STIME=?
766 -)))|(% style="width:124px" %)(((
767 -Get the button sound time
768 -)))|(% style="width:86px" %)(((
769 -0
770 -OK
771 -)))
772 -|(% style="width:155px" %)(((
773 -AT+STIME=1000
774 -)))|(% style="width:124px" %)Set the button sound time to 1000**ms**|(% style="width:86px" %)OK
595 +[[image:image-20241122094320-24.png||height="852" width="554"]]
775 775  
776 -(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
597 + image 5.14 ui_water_leak.h (2) before modification
777 777  
778 -Format: Command Code (0xA2) followed by 2 bytes mode value.
599 +[[image:image-20241122094600-25.png||height="1078" width="554"]]
779 779  
780 -* **Example: **Downlink Payload: A203E8  ~/~/ Set AT+STIME=1000  
601 + image 5.15 ui_water_leak.h (1) after modification
781 781  
782 -**~ Explain: **Hold the alarm button for 10 seconds before the node will send the alarm packet.
603 +[[image:image-20241122094719-26.png||height="941" width="583"]]
783 783  
605 + image 5.16 ui_water_leak.h (2) before modification
784 784  
607 +9. **Modify ui_water_leak.c file.** The image 5.17, 5.18, 5.19 show the code before modification, and the image 5.20, 5.21, 5.22 show the code after modification.
785 785  
786 -= 4.  Battery & How to replace =
609 +_ui_flag_modify( ((lv_obj_t *)(e->user_data)), LV_OBJ_FLAG_HIDDEN, _UI_MODIFY_FLAG_TOGGLE);  This code replaces 4 lines of code in ui_water_leak.c, so it is pasted here for convenience.
787 787  
788 -== 4.1  Battery Type and replace ==
611 +[[image:image-20241122102929-27.png||height="619" width="426"]]
789 789  
613 + image 5.17 ui_water_leak.c (1) before modification
790 790  
791 -PB01 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). Users can buy generic AAA battery and replace it.
615 +[[image:image-20241122112838-30.png||height="551" width="628"]]
792 792  
793 -(% style="color:red" %)**Note: **
617 + image 5.18 ui_water_leak.c (2) before modification
794 794  
795 -1.  The PB01 doesn't have any screw, users can use nail to open it by the middle.
619 +[[image:image-20241122110815-29.png||height="725" width="712"]]
796 796  
797 -[[image:image-20220621143535-5.png]]
621 + image 5.19 ui_water_leak.c (3) before modification
798 798  
623 +[[image:image-20241122113158-31.png||height="872" width="677"]]
799 799  
800 -2.  Make sure the direction is correct when install the AAA batteries.
625 + image 5.20 ui_water_leak.c (1) after modification
801 801  
802 -[[image:image-20220621143535-6.png]]
627 +[[image:image-20241122113259-33.png||height="874" width="724"]]
803 803  
629 + image 5.21 ui_water_leak.c (2) after modification
804 804  
805 -== 4.2  Power Consumption Analyze ==
631 +[[image:image-20241122113359-34.png||height="804" width="746"]]
806 806  
633 + image 5.22 ui_water_leak.c (3) after modification
807 807  
808 -Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
635 +10. **Modify ui_water_leak_events.h file.** The image 5.23 show the code before modification, and the image 5.24 show the code after modification.
809 809  
810 -Instruction to use as below:
637 +[[image:image-20241122134113-35.png||height="380" width="421"]]
811 811  
812 -(% style="color:blue" %)**Step 1**(%%):  Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
639 + image 5.23 ui_water_leak_events_.h before modification
813 813  
814 -[[battery calculator>>https://www.dropbox.com/sh/sxrgszkac4ips0q/AAA4XjBI3HAHNpdbU3ALN1j0a/Battery%20Document/Battery_Analyze?dl=0&subfolder_nav_tracking=1]]
641 +[[image:image-20241122134420-37.png||height="201" width="283"]]
815 815  
643 +image 5.24 ui_water_leak_events_.h after modification
816 816  
817 -(% style="color:blue" %)**Step 2**(%%):  (% style="display:none" %) (%%)Open it and choose
645 +11.** Modify ui_water_leak_events.c file.** The image 5.25 show the code before modification, and the image 5.26 show the code after modification.
818 818  
819 -* Product Model
820 -* Uplink Interval
821 -* Working Mode
647 +Step1. '#include "ui.h"'~-~->'#include "ui_water_leak.h"'
822 822  
823 -And the Life expectation in difference case will be shown on the right.
649 +Step2. add code  below in delete_object() function definition.
824 824  
825 -[[image:image-20220621143643-7.png||height="429" width="1326"]]
651 + panel_all * panel = find_upper_by_SensorPanel(&arr,((lv_obj_t *)(e->user_data~)~)~);
826 826  
653 + size_t index = panel->panel_obj_index;
827 827  
828 -= 5.  Accessories =
655 + deleteElement(&arr, index);
829 829  
657 +[[image:image-20241122135023-38.png||height="358" width="372"]]
830 830  
831 -* (((
832 -(% class="wikigeneratedid" id="H5.2A0ProgramConverter28AS-0229" %)
833 -**Program Converter (AS-02)**
834 -)))
659 + image 5.25 ui_water_leak_events_.c before modification
835 835  
836 -AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:
661 +[[image:image-20241122135258-39.png||height="403" width="559"]]
837 837  
838 -1. Access AT console of PB01 when used with USB-TTL adapter. [[See this link>>||anchor="H6.1HowtouseATCommandtoconfigurePB01"]].
663 + image 5.26 ui_water_leak_events_.c after modification
839 839  
840 -[[image:image-20220621141724-3.png]]
841 841  
666 +12. **Modify ui_water_leak_style.c file.**
842 842  
843 -= 6. FAQ =
668 +Step1. '#include "../ui.h"'~-~->#include '"../ui_water_leak.h"'
844 844  
845 -== 6.1 How to use AT Command to configure PB01 ==
670 + add '#include "../../sort.h"'
846 846  
672 + add '#include "ui.h"'
847 847  
848 -PB01 supports AT Command set. Users can use a USB to TTL adapter plus the Program Cable to connect to PB01 for using AT command, as below.
674 +[[image:image-20241122141536-41.png||height="361" width="612"]]
849 849  
850 -[[image:image-20240511085914-1.png||height="570" width="602"]]
676 + image 5.27 ui_water_leak_style.c (1) before modification
851 851  
678 +[[image:image-20241122142129-42.png||height="386" width="613"]]
852 852  
853 -**Connection:**
680 + image 5.28 ui_water_leak_style.c (1) after modification
854 854  
855 -* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin
856 -* (% style="background-color:yellow" %)USB to TTL RXD  <~-~-> Program Converter D+ pin
857 -* (% style="background-color:yellow" %)USB to TTL TXD  <~-~-> Program Converter A11 pin
858 858  
859 -(((
860 -In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for PB01. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.
861 -)))
683 +Step2. modify 'void ui_ScreenMain_screen_init(void)'~-~->'panel_with_type create_water_leak(uint8_t index)'
862 862  
863 -(((
864 -Input password and ATZ to activate PB01, as shown below:
865 -)))
685 + delete code as shown in image 5.29
866 866  
867 -[[image:image-20240510174509-18.png||height="572" width="791"]]
687 +[[image:image-20241122145620-44.png||height="757" width="671"]]
868 868  
689 + image 5.29 ui_water_leak_style.c (2)
869 869  
870 -== 6.2  AT Command and Downlink ==
871 871  
692 +Step3. The image 5.30, 5.31 show the change.
872 872  
873 -(((
874 -Sending ATZ will reboot the node
875 -)))
694 +[[image:image-20241122152026-45.png||height="277" width="828"]]
876 876  
877 -(((
878 -Sending AT+FDR will restore the node to factory settings
879 -)))
696 + image 5.30 ui_water_leak_style.c (3) before modification
880 880  
881 -(((
882 -Get the node's AT command setting by sending AT+CFG
883 -)))
698 +[[image:image-20241122152542-46.png||height="293" width="830"]]
884 884  
885 -(((
886 -
887 -)))
700 + image 5.31 ui_water_leak_style.c (3) after modification
888 888  
889 -(((
890 -**Example：**                                           
891 -)))
892 892  
893 -(((
894 -AT+DEUI=FA 23 45 55 55 55 55 51
703 +Step4. Copy partly the code in ui_water_leak.c, paste at extra_lib/sort.h(The process is shown in image 5.32, 5.33).
895 895  
896 -AT+APPEUI=FF AA 23 45 42 42 41 11
705 +[[image:image-20241122153958-47.png]]
897 897  
898 -AT+APPKEY=AC D7 35 81 63 3C B6 05 F5 69 44 99 C1 12 BA 95
707 + image 5.32 ui_water_leak_style.c (4)
899 899  
900 -AT+DADDR=FFFFFFFF
901 901  
902 -AT+APPSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
710 +[[image:image-20241122154755-49.png||height="864" width="513"]]
903 903  
904 -AT+NWKSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
712 + image 5.33 ui_water_leak_style.c (4)
905 905  
906 -AT+ADR=1
907 907  
908 -AT+TXP=7
715 +Step5. Delete event function in code which was just pasted in extra_lib/sort.h(The process is shown in image 5.34).
909 909  
910 -AT+DR=5
717 +[[image:image-20241122155650-50.png||height="922" width="513"]]
911 911  
912 -AT+DCS=0
719 + image 5.34 ui_water_leak_style.c (5)
913 913  
914 -AT+PNM=1
915 915  
916 -AT+RX2FQ=869525000
722 +Step6. Add some lines of code in extra_lib/sort.h as shown in image 5.35.
917 917  
918 -AT+RX2DR=0
724 +[[image:image-20241122161934-51.png]]
919 919  
920 -AT+RX1DL=5000
726 + image 5.35
921 921  
922 -AT+RX2DL=6000
923 923  
924 -AT+JN1DL=5000
729 +Step7. Add a line of code in extra_lib/sort.h as shown in image 5.36.
925 925  
926 -AT+JN2DL=6000
731 +[[image:image-20241122162852-53.png||height="330" width="529"]]
927 927  
928 -AT+NJM=1
733 + image 5.37
929 929  
930 -AT+NWKID=00 00 00 13
931 931  
932 -AT+FCU=61
736 +Step8. Add some code in ui_water_leak_style.c as shown in image 5.38 from line534 to line 576 in detail.
933 933  
934 -AT+FCD=11
738 +panel_with_type union_sensor;
935 935  
936 -AT+CLASS=A
740 +union_sensor.panel_type = WATER_LEAK_TYPE;
937 937  
938 -AT+NJS=1
742 +......
939 939  
940 -AT+RECVB=0:
744 +lv_obj_set_x(union_sensor.panel_union.door.ui_PanelSensorDoor, x_by_index(index));
941 941  
942 -AT+RECV=
746 +lv_obj_set_y(union_sensor.panel_union.door.ui_PanelSensorDoor, y_by_index(index));
943 943  
944 -AT+VER=EU868 v1.0.0
748 +return union_sensor;
945 945  
946 -AT+CFM=0,7,0
750 +[[image:image-20250122173546-6.png||height="777" width="922"]]
947 947  
948 -AT+SNR=0
752 + image 5.38
949 949  
950 -AT+RSSI=0
951 951  
952 -AT+TDC=1200000
755 +13. Rest midification in sort.h file.
953 953  
954 -AT+PORT=2
757 +In image 5.39 as below, we can see "WATER_LEAK_TYPE" at line 24 and water leak switch status definition at line 32,33, and these are what we need to add in sort.h.
955 955  
956 -AT+PWORD=123456
759 +[[image:image-20250122170230-1.png||height="580" width="513"]]
957 957  
958 -AT+CHS=0
761 + image 5.39 sort.h
959 959  
960 -AT+RX1WTO=24
763 +13. **Modify sort.c file.**
961 961  
962 -AT+RX2WTO=6
765 +Add a line of code ~-~-'#include "ui_water_leak.h"' as shown in image 5.39 line 26.
963 963  
964 -AT+DECRYPT=0
767 +[[image:image-20250122171910-5.png||height="524" width="510"]]
965 965  
966 -AT+RJTDC=20
769 + image 5.40 sort.c (1)
967 967  
968 -AT+RPL=0
771 +There are still some changes need to be done in sort.c, and omit here for the moment.
969 969  
970 -AT+TIMESTAMP=systime= 2024/5/11 01:10:58 (1715389858)
971 971  
972 -AT+LEAPSEC=18
973 973  
974 -AT+SYNCMOD=1
775 += 6. FAQ =
975 975  
976 -AT+SYNCTDC=10
777 +== 6.1 ==
977 977  
978 -AT+SLEEP=0
979 979  
980 -AT+ATDC=1
981 -
982 -AT+UUID=003C0C53013259E0
983 -
984 -AT+DDETECT=1,1440,2880
985 -
986 -AT+SETMAXNBTRANS=1,0
987 -
988 -AT+DISFCNTCHECK=0
989 -
990 -AT+DISMACANS=0
991 -
992 -AT+PNACKMD=0
993 -
994 -AT+SOUND=0,0
995 -
996 -AT+STIME=0
997 -
998 -AT+OPTION=3
999 -)))
1000 -
1001 -(((
1002 -**Example：**
1003 -)))
1004 -
1005 -[[image:image-20240511091518-2.png||height="601" width="836"]]
1006 -
1007 -
1008 -== 6.3  How to upgrade the firmware? ==
1009 -
1010 -
1011 -PB01 requires a program converter to upload images to PB01, which is used to upload image to PB01 for:
1012 -
1013 -* Support new features
1014 -* For bug fix
1015 -* Change LoRaWAN bands.
1016 -
1017 - PB01 internal program is divided into bootloader and work program, shipping is included bootloader, the user can choose to directly update the work program.
1018 -
1019 -If the bootloader is erased for some reason, users will need to download the boot program and the work program.
1020 -
1021 -
1022 -=== 6.3.1 Update firmware (Assume device have bootloader) ===
1023 -
1024 -
1025 -(% style="color:blue" %)**Step 1**(%%):** Connect UART as per FAQ 6.1**
1026 -
1027 -(% style="color:blue" %)**Step 2**(%%):** Update follow [[Instruction for update via DraginoSensorManagerUtility.exe>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]. **
1028 -
1029 -
1030 -=== 6.3.2 Update firmware (Assume device doesn't have bootloader) ===
1031 -
1032 -
1033 -Download both the boot program and the worker program** . **After update , device will have bootloader so can use above 6.3.1 method to update woke program.
1034 -
1035 -(% style="color:blue" %)**Step 1**(%%):** **Install [[TremoProgrammer>>url:https://www.dropbox.com/scl/fo/gk1rb5pnnjw4kv5m5cs0z/h?rlkey=906ouvgbvif721f9bj795vfrh&dl=0]]  first.
1036 -
1037 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220615170542-5.png?rev=1.1||alt="image-20220615170542-5.png"]]
1038 -
1039 -(% style="color:blue" %)**Step 2**(%%): Hardware Connection
1040 -
1041 -Connect PC and PB01 via USB-TTL adapter .
1042 -
1043 -(% style="color:red" %)**Note: To download firmware in this way, you need to pull the boot pin(Program Converter D- pin) high to enter the burn mode. After burning, disconnect the boot pin of the node and the 3V3 pin of the USB-TTL adapter, and reset the node to exit the burning mode.**
1044 -
1045 -**Connection:**
1046 -
1047 -* (% style="background-color:yellow" %)USB-TTL GND <~-~-> Program Converter GND pin
1048 -* (% style="background-color:yellow" %)USB-TTL RXD  <~-~-> Program Converter D+ pin
1049 -* (% style="background-color:yellow" %)USB-TTL TXD  <~-~-> Program Converter A11 pin
1050 -* (% style="background-color:yellow" %)USB-TTL 3V3 <~-~-> Program Converter D- pin
1051 -
1052 -(% style="color:blue" %)**Step 3**(%%):** **Select the device port to be connected, baud rate and bin file to be downloaded.
1053 -
1054 -[[image:image-20240701160913-1.png]]
1055 -
1056 -Users need to reset the node to start downloading the program.
1057 -~1. Reinstall the battery to reset the node
1058 -2. Hold down the ACT button to reset the node (see [[2.7>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/PB01--LoRaWAN_Button_User_Manual/#H2.7Button]] ).
1059 -
1060 -When this interface appears, it indicates that the download has been completed.
1061 -
1062 -[[image:image-20240701160924-2.png]]
1063 -
1064 -Finally, Disconnect Program Converter D- pin, reset the node again , and the node exits burning mode.
1065 -
1066 -
1067 -== 6.4  How to change the LoRa Frequency Bands/Region? ==
1068 -
1069 -
1070 -User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.
1071 -
1072 -
1073 -== 6.5 Why i see different working temperature for the device? ==
1074 -
1075 -
1076 -The working temperature range of device depends on the battery user choose.
1077 -
1078 -* Normal AAA Battery can support -10 ~~ 50°C working range.
1079 -* Special AAA battery can support -40 ~~ 60 °C working range. For example: [[Energizer L92>>https://data.energizer.com/pdfs/l92.pdf]]
1080 -
1081 1081  = 7. Order Info =
1082 1082  
1083 -== 7.1  Main Device ==
782 +== 7.1  Part Number ==
1084 1084  
1085 1085  
1086 -Part Number: (% style="color:#4472c4" %)PB01-LW-XX(%%) (white button) / (% style="color:#4472c4" %)PB01-LR-XX(%%)(Red Button)
785 +Part Number: (% style="color:#4472c4" %)LTS5
1087 1087  
1088 -(% style="color:#4472c4" %)**XX **(%%): The default frequency band
1089 1089  
1090 -* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band
1091 -* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band
1092 -* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band
1093 -* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band
1094 -* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band
1095 -* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band
1096 -* (% style="color:red" %)**IN865**(%%)**:  **LoRaWAN IN865 band
1097 -* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band
788 +== 7.2  Packing Info ==
1098 1098  
1099 -= 7. Packing Info =
1100 1100  
1101 -
1102 1102  **Package Includes**:
1103 1103  
1104 -* PB01 LoRaWAN Push Button x 1
793 +* LTS5 HMI Touch Screen
794 +* 5V,2A DC Power Adapter.
795 +* USB Type C Program Cable
1105 1105  
1106 1106  = 8. Support =
1107 1107  
799 +
1108 1108  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1109 1109  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1110 1110  
1111 -
1112 1112  = 9.  Reference material =
1113 1113  
805 +
1114 1114  * Datasheet
1115 -* Source Code
807 +* Source Code: [[dragino/LoRa-HMI-Touch-Screen: Open Source LoRa / LoRaWAN HMI Touch Screen Project>>url:https://github.com/dragino/LoRa-HMI-Touch-Screen/tree/main]]
1116 1116  * Mechinical
1117 1117  
1118 -
1119 1119  = 10. FCC Warning =
1120 1120  
1121 1121  
1727229396732-319.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +197.2 KB
Content
1727229550717-684.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +113.9 KB
Content
1727229582471-566.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +73.6 KB
Content
1727229618724-758.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +118.7 KB
Content
1727229653254-680.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +116.2 KB
Content
1727229682537-381.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +51.5 KB
Content
1727229715361-392.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +75.2 KB
Content
1727229740592-843.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +87.3 KB
Content
1727229760857-521.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content
1727229798126-306.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +53.6 KB
Content
1727229821582-258.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +76.1 KB
Content
1727229845835-509.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
1727229892636-154.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +192.0 KB
Content
1727229926561-300.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +178.0 KB
Content
1727229955611-607.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +100.4 KB
Content
1727229990795-405.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +383.6 KB
Content
1727230012478-930.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +477.1 KB
Content
1727231038705-173.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +94.6 KB
Content
1727233636007-933.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +114.8 KB
Content
1727484665746-713.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +94.9 KB
Content
1727485118799-984.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +11.8 KB
Content
1727485251053-655.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
1727485480434-713.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content
1727485933579-550.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
1727485953726-175.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +91.6 KB
Content
1727486567182-334.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
1727486578489-774.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +66.0 KB
Content
1727487368023-281.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +28.5 KB
Content
1727488067077-684.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +604.7 KB
Content
1727488099947-341.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
1727488108117-780.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
1727488157579-949.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
1738893226894-758.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +25.6 KB
Content
Screenshot 2024-12-24 134818.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +15.0 KB
Content
Screenshot 2024-12-24 134937.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 KB
Content
Screenshot 2024-12-24 140459.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +12.0 KB
Content
Screenshot 2024-12-24 144005.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +28.0 KB
Content
image-20240916101737-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +156.7 KB
Content
image-20240925110638-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +262.7 KB
Content
image-20240928090825-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +30.2 KB
Content
image-20240928103357-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +153.7 KB
Content
image-20240928103506-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +197.7 KB
Content
image-20240928105309-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +80.2 KB
Content
image-20240928110211-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +228.0 KB
Content
image-20240928111412-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +150.9 KB
Content
image-20240928111654-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +105.4 KB
Content
image-20240928112001-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20240928113424-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +50.8 KB
Content
image-20240928114139-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20240928144830-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20241121113445-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +250.0 KB
Content
image-20241121120222-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +44.8 KB
Content
image-20241121120830-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
image-20241121141120-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +41.7 KB
Content
image-20241121141315-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
image-20241121141329-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
image-20241121142925-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.8 KB
Content
image-20241121145915-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +61.0 KB
Content
image-20241121150911-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +73.0 KB
Content
image-20241121151934-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20241121171629-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +16.9 KB
Content
image-20241121171901-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +17.2 KB
Content
image-20241121172714-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +26.4 KB
Content
image-20241121172908-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +27.1 KB
Content
image-20241121180030-15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +27.7 KB
Content
image-20241121180517-16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +26.5 KB
Content
image-20241121181957-17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +59.3 KB
Content
image-20241121182239-18.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +71.3 KB
Content
image-20241122092239-19.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +270.9 KB
Content
image-20241122092655-20.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +251.6 KB
Content
image-20241122093445-21.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +128.9 KB
Content
image-20241122093601-22.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +120.0 KB
Content
image-20241122094200-23.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +289.2 KB
Content
image-20241122094320-24.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +182.4 KB
Content
image-20241122094600-25.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +136.0 KB
Content
image-20241122094719-26.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +129.5 KB
Content
image-20241122102929-27.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +219.9 KB
Content
image-20241122104344-28.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +257.1 KB
Content
image-20241122110815-29.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +246.1 KB
Content
image-20241122112838-30.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +263.9 KB
Content
image-20241122113158-31.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +133.7 KB
Content
image-20241122113252-32.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +152.3 KB
Content
image-20241122113259-33.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +152.3 KB
Content
image-20241122113359-34.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +126.5 KB
Content
image-20241122134113-35.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +69.3 KB
Content
image-20241122134412-36.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20241122134420-37.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20241122135023-38.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20241122135258-39.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +40.3 KB
Content
image-20241122141526-40.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +78.8 KB
Content
image-20241122141536-41.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +78.8 KB
Content
image-20241122142129-42.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20241122143105-43.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +60.2 KB
Content
image-20241122145620-44.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +394.0 KB
Content
image-20241122152026-45.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +201.6 KB
Content
image-20241122152542-46.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +95.3 KB
Content
image-20241122153958-47.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +241.1 KB
Content
image-20241122154745-48.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +135.7 KB
Content
image-20241122154755-49.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +135.7 KB
Content
image-20241122155650-50.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content
image-20241122161934-51.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +230.3 KB
Content
image-20241122162612-52.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +58.7 KB
Content
image-20241122162852-53.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +125.5 KB
Content
image-20241122171211-54.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +173.3 KB
Content
image-20241122173706-55.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
image-20241122173718-56.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
image-20241226135550-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +293.3 KB
Content
image-20250122170230-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +77.3 KB
Content
image-20250122171809-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +51.1 KB
Content
image-20250122171825-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +51.1 KB
Content
image-20250122171832-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +51.1 KB
Content
image-20250122171910-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +51.1 KB
Content
image-20250122173546-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +200.4 KB
Content
image-20250207100150-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +54.1 KB
Content
image-20250207101415-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +17.6 KB
Content
image-20250207101515-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +24.1 KB
Content
image-20250207142334-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +62.0 KB
Content
image-20250207143131-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +48.7 KB
Content
image-20250207144605-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +58.1 KB
Content
image-20250207164320-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +194.5 KB
Content
image-20250207165702-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +78.1 KB
Content
image-20250207170215-15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +2.6 KB
Content
image-20250207170307-16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +2.2 KB
Content
image-20250207171650-17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +11.0 KB
Content
image-20250207171851-18.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 KB
Content
image-20250207172010-19.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 KB
Content
image-20250207172246-20.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 KB
Content
image-20250207172443-21.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +3.9 KB
Content
image-20250207172821-22.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +0 bytes
Content
image-20250207172834-23.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +0 bytes
Content
image-20250207173152-24.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +3.9 KB
Content
image-20250207173159-25.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +3.9 KB
Content
image-20250207173206-26.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +3.9 KB
Content
image-20250207173212-27.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +3.9 KB
Content
image-20250207192107-28.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.3 KB
Content
squalreline-trial.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +60.4 KB
Content
squareline-studio-launcher-screen.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +203.4 KB
Content
squareline.io_downloads.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 MB
Content