Skip to Content
Last modified by BoYang Xie on 2025/07/24 16:47
From version 4.1
edited by Edwin Chen
on 2024/09/15 23:32
Change comment: There is no comment for this version
To version 123.1
edited by Dilisi S
on 2024/12/24 04:36
Change comment: Dec 23 edits - Part 1

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.pradeeka
Content
... ... @@ -1,9 +1,14 @@
1 -
1 +(% style="text-align:center" %)
2 2  [[image:image-20240915231842-1.png]]
3 3  
4 4  
5 +
6 +
7 +
8 +
9 +
5 5  (% _mstvisible="1" %)
6 -(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
11 +(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents:**
7 7  
8 8  {{toc/}}
9 9  
... ... @@ -16,59 +16,77 @@
16 16  
17 17  = 1.  Introduction =
18 18  
19 -== 1.1  What is LTS5 LoRa HMI touch screen ==
24 +== 1.1  What is the LTS5 LoRa HMI Touch Screen? ==
20 20  
21 -LTS5 is a (% style="color:blue" %)LoRa / LoRaWAN HMI Touch Screen(%%) designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.
22 22  
23 -LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.
27 +The LTS5 is a (% style="color:blue" %)**LoRa / LoRaWAN HMI Touch Screen**(%%) designed for displaying information in IoT projects. It features a **5.0-inch HMI touch screen** and supports **Wi-Fi**, **Bluetooth**, and **LoRa** wireless protocols.
24 24  
25 -The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the UI.
29 +The LTS5 is an open-source software project powered by an **ESP32 MCU** and a **Dragino LA66 LoRa** module. The extensive development resources available for ESP32 can significantly reduce development time.
26 26  
31 +The LTS5's HMI touch screen supports **drag-and-drop** design, allowing developers to use SquareLine to easily customize the display UI for various applications.
27 27  
33 +The LA66 LoRa module can be programmed to support either private LoRa protocols or the LoRaWAN protocol.
34 +
28 28  == 1.2  Features ==
29 29  
30 30  
38 +* ESP32-WROOM MCU: 8MB RAM & 16MB ROM
39 +* Dragino LA66 LoRa Module
40 +* Support Private LoRa protocol or LoRaWAN protocol
41 +* Support WiFi & BLE wireless protocol
42 +* 5.0" HMI touch screen
43 +* Support LVGL case. SquareLine program.
44 +* Support RS485 Interface
45 +* Open Source Project
31 31  * Wall Attachable.
32 -* LoRaWAN v1.0.3 Class A protocol.
33 -* 1 x push button. Different Color available.
34 -* Built-in Temperature & Humidity sensor
35 -* Built-in speaker
36 -* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
37 -* AT Commands to change parameters
38 -* Remote configure parameters via LoRaWAN Downlink
39 -* Firmware upgradable via program port
40 -* Support 2 x AAA LR03 batteries.
47 +* 5V DC power
41 41  * IP Rating: IP52
42 42  
43 -== 1.3  Specification ==
50 +== 1.3  Specifications ==
44 44  
45 45  
46 -**Built-in Temperature Sensor:**
53 +**LoRa**:
47 47  
48 -* Resolution: 0.01 °C
49 -* Accuracy Tolerance: Typ ±0.2 °C
50 -* Long Term Drift: < 0.03 °C/yr
51 -* Operating Range: -10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
55 +* Frequency Range: 870 MHz ~~ 960 MHz
56 +* TCXO crystal to ensure RF performance on low temperature
57 +* Maximum Power +22 dBm constant RF output
58 +* High sensitivity: -148 dBm
59 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
60 +* LoRa Rx current: <9 mA
52 52  
53 -**Built-in Humidity Sensor:**
62 +**WiFi:**
54 54  
55 -* Resolution: 0.01 %RH
56 -* Accuracy Tolerance: Typ ±1.8 %RH
57 -* Long Term Drift: < 0.2% RH/yr
58 -* Operating Range: 0 ~~ 99.0 %RH(no Dew)
64 +* 802.11b/g/n
65 +* Up to 150 Mbps data rate in 802.11n mode
66 +* Support A-MPDU and A-MSDU aggregation
67 +* zero point four μ S protection interval
68 +* Working channel center frequency range: 2412~~2484 MHz
59 59  
60 -== 1.4  Power Consumption ==
70 +**Bluetooth:**
61 61  
72 +* Bluetooth V4.2 BR/EDR and Bluetooth LE standard
73 +* Class-1, Class-2, and Class-3 transmitters.
74 +* AFH
75 +* CVSD and SBC
62 62  
63 -PB01 : Idle: 5uA, Transmit: max 110mA
77 +**Display:**
64 64  
79 +* 5.0 Inch , 800 x 480
80 +* IPS Capacitive Touch SCreen
81 +* RGB color.
82 +* Display Area: 120.7*75.80 mm
65 65  
66 -== 1.5  Storage & Operation Temperature ==
84 +== 1.4  Power Consumption ==
67 67  
68 68  
69 --10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
87 +* External 5V DC power adapter
70 70  
89 +== 1.5  Storage & Operation Temperature ==
71 71  
91 +
92 +* Operation Temperature: -20 ~~ 70°C  (No Dew)
93 +* Storage Temperature: -30 ~~ 70°C  (No Dew)
94 +
72 72  == 1.6  Applications ==
73 73  
74 74  
... ... @@ -79,1036 +79,515 @@
79 79  * Smart Cities
80 80  * Smart Factory
81 81  
82 -= 2.  Operation Mode =
105 += 2.  Getting Started with 'Hello World' =
83 83  
84 -== 2.1  How it work? ==
107 +== 2.1  About this demo ==
85 85  
86 86  
87 -Each PB01 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use PB01 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if PB01 is under this LoRaWAN network coverage, PB01 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.
110 +This getting started example demonstrates how to design and deploy a simple display UI for the LTS5 device. The example includes:
88 88  
112 +* Creating a basic UI with a single button.
113 +* Implementing functionality to navigate the Web UI to a new page when the button is clicked.
114 +* Uploading the UI to the LTS5 device.
89 89  
90 -== 2.2  How to Activate PB01? ==
116 +By completing this demo, you will gain foundational knowledge for customizing the LTS5 interface and building more advanced IoT applications.
91 91  
92 92  
93 -(% style="color:red" %)** 1.  Open enclosure from below position.**
119 +== 2.2  Install Software Running Environment ==
94 94  
95 -[[image:image-20220621093835-1.png]]
96 96  
122 +The **ESP MCU** supports development with **ESP-IDF**, **Arduino**, or **MicroPython**. We use **ESP-IDF** for compilation and **Visual Studio Code (VS Code)** as the development environment for this project.
97 97  
98 -(% style="color:red" %)** 2.  Insert 2 x AAA LR03 batteries and the node is activated.**
99 99  
100 -[[image:image-20220621093835-2.png]]
125 +=== 2.2.1 Install VS Code and ESP-IDF extension ===
101 101  
102 102  
103 -(% style="color:red" %)** 3. Under the above conditions, users can also reactivate the node by long pressing the ACT button.**
128 +First, download and install **VS Code** for your operating system from the Visual Studio Code website: [[Visual Studio Code - Mac, Linux, Windows>>https://code.visualstudio.com/download]].
104 104  
105 -[[image:image-20220621093835-3.png]]
130 +Next, install the **ESP-IDF** extension within **VS Code**. Detailed steps for this process are shown in Image 1.
106 106  
107 107  
108 -User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of PB01.
133 +[[image:image-20240928110211-5.png||height="508" width="866"]]
109 109  
135 + Image 1: ESP-IDF extension install
110 110  
111 -== 2.3  Example to join LoRaWAN network ==
137 +Links for reference: [[Install ESP32 ESP-IDF on Windows and Integrate with VS code (esp32tutorials.com)>>url:https://esp32tutorials.com/install-esp32-esp-idf-windows-integrate-vs-code/#:~~:text=In%20this%20tutorial,%20we%20will%20show%20you%20how%20to%20install]]
112 112  
113 113  
114 -This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
140 +=== 2.2.2 Install SquareLine Studio ===
115 115  
116 -(% _mstvisible="1" class="wikigeneratedid" %)
117 -Assume the LPS8v2 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the PB01 device in TTN V3 portal. 
118 118  
119 -[[image:image-20240705094824-4.png]]
143 +Download and install the latest version of [[SquareLine Studio>>https://squareline.io/downloads#lastRelease]] on your computer. It supports Windows, Linux, and Mac OS. The software version we are using here is 1.4.2.
120 120  
121 -(% style="color:blue" %)**Step 1**(%%):  Create a device in TTN V3 with the OTAA keys from PB01.
145 +[[image:squareline.io_downloads.png]]
122 122  
123 -Each PB01 is shipped with a sticker with the default DEV EUI as below:
124 124  
125 -[[image:image-20230426083617-1.png||height="294" width="633"]]
148 +After installation, you can use SquareLine Studio with a **PERSONAL license plan**. Click **LOG IN** and create a free account using your email address. Then activate your PERSONAL license plan for free. You don’t need to provide any credit card information. However, the PERSONAL license plan has the following limitations:
126 126  
150 +* Max. 10 screens
151 +* Max. 150 widgets
152 +* Max. 5 global colors
153 +* Max. 2 themes
154 +* Max. 1 component
127 127  
128 -Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:
156 +== 2.3 Simple usage of SquareLine Studio and exporting UI code ==
129 129  
130 -Create application.
131 131  
132 -choose to create the device manually.
159 +After launching and logging into the software, create a new project as shown in Image 2.
133 133  
134 -Add JoinEUI(AppEUI), DevEUI, AppKey.(% style="display:none" %)
161 +* Select the major **LVGL** version as **8.3**.
162 +* Select the **Desktop** tab.
163 +* Select  **Eclipse with  SDL for  development on PC**:
164 +* In the **PROJECT SETTINGS**, select **LVGL version** **8.3.11**
165 +* Select the **CREATE **button.
135 135  
136 -[[image:image-20240507142116-1.png||height="410" width="1138"]](% style="display:none" %) (%%)
137 -
167 +[[image:image-20240928103357-2.png||height="680" width="708"]]
138 138  
139 -[[image:image-20240507142157-2.png||height="559" width="1147"]]
169 + Image 2: Creating a new SquareLine project
140 140  
141 -[[image:image-20240507142401-3.png||height="693" width="1202"]]
142 142  
143 -[[image:image-20240507142651-4.png||height="760" width="1190"]]
172 +Next, you need to configure some settings for this project. By clicking in the specified order shown in Image 3, you will be directed to the page displayed in Image 4.
144 144  
145 -**Default mode OTAA**(% style="display:none" %)
174 +* Select** File  -> Project Settings**
146 146  
176 +[[image:1727229582471-566.png]]
147 147  
148 -(% style="color:blue" %)**Step 2**(%%):  Use ACT button to activate PB01 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
178 + Image 3 accessing project settings
149 149  
150 -[[image:image-20240507143104-5.png||height="434" width="1398"]]
151 151  
181 +In the PROJECT SETTINGS dialog box, configure/modify the project settings:
152 152  
153 -== 2.4  Uplink Payload ==
183 +* **UI Files Export Root**: Select a folder on your computer to store the UI files.
184 +* **LVGL Include Path**: Set this to **lvgl.h**
185 +* **Click on the APPLY CHANGES button.**
154 154  
187 +[[image:image-20240928105309-4.png||height="526" width="556"]]
155 155  
156 -Uplink payloads include two types: Valid Sensor Value and other status / control command.
189 + Image 4 Configure/modify project settings
157 157  
158 -* Valid Sensor Value: Use FPORT=2
159 -* Other control command: Use FPORT other than 2.
160 160  
161 -=== 2.4.1  Uplink FPORT~=5, Device Status ===
192 +Now you can start building the sample UI. Follow the steps below:
162 162  
163 163  
164 -Users can  get the Device Status uplink through the downlink command:
195 +=== Add widgets ===
165 165  
166 -(% style="color:#4472c4" %)**Downlink:  **(%%)**0x2601**
197 +To add widgets navigate to the **Widgets** area, then click on the widgets you want to add. The selected widgets will be added to the screen. You can reposition the widgets in the screen area by clicking and dragging them.
167 167  
168 -Uplink the device configures with FPORT=5.
199 +Add a Label, Button, and Image to the screen as shown in **Image 5**.
169 169  
170 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:370px" %)
171 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**Size(bytes)(% style="display:none" %) (%%)**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**
172 -|(% style="width:99px" %)Value|(% style="width:62px" %)Sensor Model|(% style="width:80px" %)Firmware Version|(% style="width:82px" %)Frequency Band|(% style="width:85px" %)Sub-band|(% style="width:46px" %)BAT
201 +[[image:image-20240928111412-6.png||height="526" width="864"]]
173 173  
174 -[[image:image-20240507152130-12.png||height="469" width="1366"]](% style="display:none" %)
203 + Image 5: Add widgets
175 175  
176 -Example Payload (FPort=5):  [[image:image-20240507152254-13.png||height="26" width="130"]]
205 +=== Modify widget properties ===
177 177  
207 +The area for modifying widgets is called the **Inspector** tab. The Inspector tab consists of four sections: **COMPONENT**, **<WIDGET>**, **STYLE SETTINGS**, and **EVENTS**, as shown in Image 6.
178 178  
179 -(% style="color:#4472c4" %)**Sensor Model**(%%): For PB01, this value is 0x35.
209 +The second section allows you to adjust a widget's layout, size, position, alignment, flags, states, and more. When you select a widget on the screen, the name of this section changes to match the name of the selected widget.
180 180  
181 -(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.
211 +[[image:1727485118799-984.png]]
182 182  
183 -(% style="color:#4472c4" %)**Frequency Band**:
213 + Image 6: The button widget's "Inspector" tab
184 184  
185 -*0x01: EU868
186 186  
187 -*0x02: US915
216 +==== Changing the Button properties ====
188 188  
189 -*0x03: IN865
218 +Click the Button.
190 190  
191 -*0x04: AU915
220 +Under the "Layout" you can change the button's position and size.
192 192  
193 -*0x05: KZ865
222 +[[image:1727485251053-655.png]]
194 194  
195 -*0x06: RU864
224 +Image 7: The button widget's "BUTTON" tab
196 196  
197 -*0x07: AS923
198 198  
199 -*0x08: AS923-1
227 +Next, add a click event to the button. When the button is clicked, an event should trigger to change the current screen (Screen1) to a new screen (Screen2) with a fade effect and the transition from Screen1 to Screen2 should take 500ms.
200 200  
201 -*0x09: AS923-2
229 +* Click **ADD EVENT** button.
230 +* Select **CLICKED** under the Trigger.
231 +* Select **Screen2** from **Screen to**.
232 +* Select **FADE ON** from **Fade mode**.
233 +* Enter **500** in the **Speed** text box.
234 +* Finally, click **ADD** button.
202 202  
203 -*0x0a: AS923-3
236 +[[image:1727485480434-713.png||height="395" width="290"]]
204 204  
238 + Image 8: Add an event for the button
205 205  
206 -(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
207 207  
208 -(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for PB01.
241 +==== Changing the label properties ====
209 209  
210 -(% style="color:#4472c4" %)**Ex1**(%%): 0x0C DE = 3294mV
243 +Click the label. Under the **Label** section, type "Click For Detail" in the **Text** textbox.
211 211  
212 212  
213 -=== 2.4.2  Uplink FPORT~=2, Real time sensor value ===
246 +[[image:image-20240928090825-1.png||height="327" width="391"]]
214 214  
248 + Image 9:  Modify text of label widget
215 215  
216 -PB01 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].
217 217  
218 -Uplink uses FPORT=2 and every 20 minutes send one uplink by default.
251 +==== 4. Changing image properties ====
219 219  
220 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460px" %)
221 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
222 -**Size(bytes)**
223 -)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)2|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
224 -**1**
225 -)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
226 -**1**
227 -)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)(((
228 -**2**
229 -)))|=(% style="width: 40px;background-color:#4F81BD;color:white" %)(((
230 -**2**
231 -)))
232 -|(% style="width:97px" %)(((
233 -Value
234 -)))|(% style="width:39px" %)Battery|(% style="width:39px" %)(((
235 -Sound_ACK
253 +To use the image widget, you should first add an image to your project. The image format must be PNG, and its resolution should not exceed 800x480 pixels. There are two ways to add an image file. One way is to move your image into the folder "…/squareline project/assets/", as shown in image 10. The other way is to click the "ADD FILE INTO ASSETS" button, then select an image from your computer to import. After adding, you can see the image in the "assets" area in SquareLine Studio, as demonstrated in image 11.
236 236  
237 -&Sound_key
238 -)))|(% style="width:100px" %)(((
239 -(((
240 -Alarm
241 -)))
242 -)))|(% style="width:77px" %)(((
243 -(((
244 -Temperature
245 -)))
246 -)))|(% style="width:47px" %)(((
247 -Humidity
248 -)))
255 +[[image:image-20240928113424-9.png||height="355" width="505"]]
249 249  
250 -Example in TTN.
257 + image 10 add image file into SquareLine Studio project
251 251  
252 -[[image:image-20240507150155-11.png||height="549" width="1261"]]
259 +[[image:image-20240928114139-10.png||height="559" width="810"]]
253 253  
254 -Example Payload (FPort=2):  (% style="background-color:yellow" %)**0C EA 03 01 01 11 02 A8**
261 + image 11 use image widget in SquareLine Studio
255 255  
256 -==== (% style="color:blue" %)**Battery:**(%%) ====
257 257  
258 -Check the battery voltage.
264 +==== 5. The relationship between widgets ====
259 259  
260 -* Ex1: 0x0CEA = 3306mV
261 -* Ex2: 0x0D08 = 3336mV
266 +Widgets commonly have two types of relationships: **parallel** and **parent-child**.
262 262  
263 -==== (% style="color:blue" %)**Sound_ACK & Sound_key:**(%%) ====
268 +* In a **parallel relationship**, widgets' positions are determined relative to a shared reference object.
269 +* In a **parent-child relationship**, any part of the child object outside the parent's boundaries is hidden by default. To make the child object fully visible, you must adjust its position to fit within the parent's range, as shown in Image 13.
264 264  
265 -Key sound and ACK sound are enabled by default.
271 +[[image:1727486567182-334.png||height="318" width="278"]]
266 266  
267 -* Example1: 0x03
268 268  
269 - Sound_ACK: (03>>1) & 0x01=1, OPEN.
274 +Move **Label1** to make it a child of **Button1**. See Image 13.
270 270  
271 -**~ ** Sound_key:  03 & 0x01=1, OPEN.
276 +[[image:image-20240928112001-8.png||height="431" width="796"]]
272 272  
273 -* Example2: 0x01
278 + Image 13: Move Label1 to make it a child of Button1.
274 274  
275 - Sound_ACK: (01>>1) & 0x01=0, CLOSE.
276 276  
277 -**~ ** Sound_key:  01 & 0x01=1, OPEN.
281 +**6. Preview the screen**
278 278  
283 +You can test the result by clicking on the **PLAY** button. The screen will change into play mode. See Image 14.
279 279  
280 -==== (% style="color:blue" %)**Alarm:**(%%) ====
285 +[[image:1727487368023-281.png]]
281 281  
282 -Key alarm.
287 + Image 14: Simulating the project
283 283  
284 -* Ex1: 0x01 & 0x01=1, TRUE.
285 -* Ex2: 0x00 & 0x01=0, FALSE.
286 286  
287 -==== (% style="color:blue" %)**Temperature:**(%%) ====
290 +For more information, please visit the official link: [[SquareLine Studio 1.4.2 Documentation ~| SquareLine Studio>>url:https://docs.squareline.io/docs/squareline/]].
288 288  
289 -* Example1:  0x0111/10=27.3℃
290 -* Example2:  (0xFF0D-65536)/10=-24.3℃
291 291  
292 -If payload is: FF0D :  (FF0D & 8000 == 1) , temp = (FF0D - 65536)/100 =-24.3℃
293 +== 2.4 Integrate UI Code to ESP-IDF Project ==
293 293  
294 -（FF0D & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
295 295  
296 +To achieve the integrating, we first need to export the UI code, then make some modifications, and finally relocate the UI code to a specific position within the project.
296 296  
297 -==== (% style="color:blue" %)**Humidity:**(%%) ====
298 +[[image:1727229798126-306.png]]
298 298  
299 -* Humidity:    0x02A8/10=68.0%
300 + image 15 export UI file
300 300  
301 -=== 2.4.3  Uplink FPORT~=3, Datalog sensor value ===
302 +[[image:1727229821582-258.png||height="333" width="662"]]
302 302  
304 + image 16 exported UI file
303 303  
304 -PB01 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.
306 +Create a empty directory entitled "ui" in path "basic_prj/app_components/ui/", and then copy all UI code exported to this directory.
305 305  
306 -[[image:image-20240510144912-1.png||height="471" width="1178"]](% style="display:none" %)
308 +[[image:image-20240928144830-11.png]]
307 307  
310 + image 17 open CMakeLists.txt
308 308  
309 -* Each data entry is 11 bytes, to save airtime and battery, PB01 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)
312 +[[image:1727229892636-154.png||height="521" width="407"]]
310 310  
311 -For example, in US915 band, the max payload for different DR is:
314 + image 18 modify CMakeLists.txt
312 312  
313 -1. **DR0**: max is 11 bytes so one entry of data
314 -1. **DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
315 -1. **DR2**: total payload includes 11 entries of data
316 -1. **DR3**: total payload includes 22 entries of data.
316 +The last step of integrating is adding two lines of code in main.c file.
317 317  
318 -(% style="color:red" %)**Notice: PB01 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**
318 +[[image:1727229926561-300.png]]
319 319  
320 -See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].
320 + image 19 add "ui.h"
321 321  
322 -(% style="display:none" %) (%%)
322 +[[image:1727229955611-607.png]]
323 323  
324 -=== 2.4.4  Decoder in TTN V3 ===
324 + image 20 add "ui_init()"
325 325  
326 326  
327 -In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.
327 +== 2.5 Brief introduction of hello world project ==
328 328  
329 -In TTN , add formatter as below:
330 330  
331 -[[image:image-20240507162814-16.png||height="778" width="1135"]]
330 +The project consists of two screens. The first screen displays the company's logo, the project name, and a button to navigate to the next screen. The second screen presents some information about this HMI screen product through an image and includes a button to return to the previous screen.
332 332  
333 -(((
334 -Please check the decoder from this link:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
335 -)))
336 336  
337 -(((
338 -
339 -)))
333 +== 2.6 Test Result ==
340 340  
341 -== 2.5 Show data on Datacake ==
342 342  
336 +By pressing the button lying bottom right, the screen can switch to another as expected. This indicates that the UI file has been successfully integrated into the project and is now effective.
343 343  
344 -(((
345 -Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
346 -)))
338 +[[image:1727488067077-684.png||height="402" width="574"]]
347 347  
348 -(((
349 -
350 -)))
340 + image 21 screen1
351 351  
352 -(((
353 -(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the LoRaWAN network.
354 -)))
342 +[[image:1727488157579-949.png||height="397" width="572"]]
355 355  
356 -(((
357 -(% style="color:blue" %)**Step 2**(%%):  Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
358 -)))
344 + image 22 screen2
359 359  
360 -(((
361 -~1. Add Datacake:
362 -)))
363 363  
364 -(((
365 -2. Select default key as Access Key:
366 -)))
347 += 3. Example Project 1: LoRa Central Display =
367 367  
368 -(((
369 -3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add PB01:
370 -)))
349 +[[image:image-20240916101737-1.png||height="468" width="683"]]
371 371  
372 -(((
373 - Please refer to the figure below.
374 -)))
375 375  
376 -[[image:image-20240510150924-2.png||height="612" width="1186"]]
352 += 4. Example Project 2: LoRaWAN RS485 Alarm =
377 377  
354 += 5.  The way to add a new panel to project =
378 378  
379 -Log in to DATACAKE, copy the API under the account.
356 +**~1. Design a panel in SquareLine Studio, using image 5.1 below as a reference.**
380 380  
381 -[[image:image-20240510151944-3.png||height="581" width="1191"]]
358 +[[image:image-20241121113445-1.png||height="584" width="934"]]
382 382  
360 + image 5.1 a panel about water_leak
383 383  
362 +**2. Export the ui file.** You need  to adjust the export path first, then click "Export->Export UI Files". This step had been introduced before. Then you can get the ui files as shown in image 5.2.
384 384  
385 -[[image:image-20240510152150-4.png||height="697" width="1188"]]
364 +[[image:image-20241121141120-4.png||height="383" width="795"]]
386 386  
366 + image 5.2 ui files exported
387 387  
388 -[[image:image-20240510152300-5.png||height="298" width="1191"]]
368 +**3. Delete or rename some file.** Here are the steps:
389 389  
370 + Step1 Delete the 'components' directory.
371 + Step2 Delete 'filelist.txt'.
372 + Step3 Delete 'ui_helpers.c' and 'ui_helpers.h'.
373 + Step4 Rename 'ui_ScreenMain.c' in the 'screens' directory to 'ui_water_leak_style.c'.
374 + Step5 Rename the 'screens' directory to 'styles'.
390 390  
391 -[[image:image-20240510152355-6.png||height="782" width="1193"]]
376 +[[image:image-20241121151934-10.png||height="303" width="792"]]
392 392  
393 -[[image:image-20240510152542-8.png||height="545" width="739"]]
378 + image 5.3 rest file (1)
394 394  
395 -[[image:image-20240510152634-9.png||height="748" width="740"]]
380 +[[image:image-20241121142925-7.png||height="141" width="793"]]
396 396  
382 + image 5.4 rest file (2)
397 397  
398 -[[image:image-20240510152809-10.png||height="607" width="732"]]
384 +**4. Open this project in vscode.**
399 399  
400 -[[image:image-20240510153934-14.png||height="460" width="1199"]]
386 +5. Add file include path about water_leak in extra_lib/CMakeLists.txt as shown in image 5.5, 5.6, and its format is similar to the tem_hum or door.
401 401  
388 +[[image:image-20241121181957-17.png||height="438" width="516"]]
402 402  
403 -[[image:image-20240510153435-12.png||height="428" width="1197"]]
390 + image 5.5 extra_lib/CMakeLists.txt before add
404 404  
392 +[[image:image-20241121182239-18.png||height="520" width="518"]]
405 405  
406 -Copy and paste the [[TTN decoder>>https://github.com/dragino/dragino-end-node-decoder]] here and save.
394 + image 5.6 extra_lib/CMakeLists.txt after add
407 407  
408 -[[image:image-20240510153624-13.png||height="468" width="1195"]]
396 +**6. Modify header file include in fonts and images directory.** Open the fonts/ui_font_Font12.c file, as shown in image 5.7, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.8 is the modified image. Other font file need to be modified in same way.
409 409  
398 +[[image:image-20241121171629-11.png]]
410 410  
411 -Visual widgets please read the DATACAKE documentation.
400 + image 5.7 before-modified font file
412 412  
413 -(% style="display:none" %) (%%)
402 +[[image:image-20241121171901-12.png]]
414 414  
415 -== 2.6  Datalog Feature ==
404 + image 5.8 modified font file
416 416  
406 +Open the images/ui_img_battery_empty_png.c file, as shown in image 5.9, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.10 is the modified image. Other image file need to be modified in same way.
417 417  
418 -(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
419 -When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.
408 +[[image:image-20241121172714-13.png]]
420 420  
410 + image 5.9 before-modified image file
421 421  
422 -=== 2.6.1  Unix TimeStamp ===
412 +[[image:image-20241121172908-14.png]]
423 423  
414 + image 5.10 modified image file
424 424  
425 -Unix TimeStamp shows the sampling time of uplink payload. format base on
416 +**7. Modify the ui_water_leak/CMakeLists.txt.** Open this file, and modify it from image 5.11 to image 5.12.
426 426  
427 -[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
418 +[[image:image-20241121180030-15.png]]
428 428  
429 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
420 + image 5.11 ui_water_leak/CMakeLists.txt before modification
430 430  
431 -For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)
422 +[[image:image-20241121180517-16.png]]
432 432  
424 + image 5.12 ui_water_leak/CMakeLists.txt after modification
433 433  
434 -[[image:1655782409139-256.png]]
426 +**8. Modify ui_water_leak.h file.** The image 5.13, 5.14 show the code before modification, and the image 5.15, 5.16 show the code after modification.
435 435  
428 +[[image:image-20241122094200-23.png]]
436 436  
437 -=== 2.6.2  Poll sensor value ===
430 + image 5.13 ui_water_leak.h (1) before modification
438 438  
432 +[[image:image-20241122094320-24.png||height="852" width="554"]]
439 439  
440 -(((
441 -User can poll sensor value based on timestamps from the server. Below is the downlink command.
442 -)))
434 + image 5.14 ui_water_leak.h (2) before modification
443 443  
444 -(((
445 -Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
446 -)))
436 +[[image:image-20241122094600-25.png||height="1078" width="554"]]
447 447  
448 -(((
449 -For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)
450 -)))
438 + image 5.15 ui_water_leak.h (1) after modification
451 451  
452 -(((
453 -Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data
454 -)))
440 +[[image:image-20241122094719-26.png||height="941" width="583"]]
455 455  
456 -(((
457 -Uplink Internal =5s，means PB01 will send one packet every 5s. range 5~~255s.
458 -)))
442 + image 5.16 ui_water_leak.h (2) before modification
459 459  
444 +**9. Modify ui_water_leak.c file.** The image 5.17, 5.18, 5.19 show the code before modification, and the image 5.20, 5.21, 5.22 show the code after modification.
460 460  
461 -=== 2.6.3  Datalog Uplink payload ===
446 +_ui_flag_modify( ((lv_obj_t *)(e->user_data)), LV_OBJ_FLAG_HIDDEN, _UI_MODIFY_FLAG_TOGGLE);  This code replaces 4 lines of code in ui_water_leak.c, so it is pasted here for convenience.
462 462  
448 +[[image:image-20241122102929-27.png||height="619" width="426"]]
463 463  
464 -See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]
450 + image 5.17 ui_water_leak.c (1) before modification
465 465  
466 -(% style="display:none" %) (%%) (% style="display:none" %)
452 +[[image:image-20241122112838-30.png||height="551" width="628"]]
467 467  
468 -== 2.7 Button ==
454 + image 5.18 ui_water_leak.c (2) before modification
469 469  
456 +[[image:image-20241122110815-29.png||height="725" width="712"]]
470 470  
471 -* ACT button
458 + image 5.19 ui_water_leak.c (3) before modification
472 472  
473 -Long press this button PB01 will reset and join network again.
460 +[[image:image-20241122113158-31.png||height="872" width="677"]]
474 474  
475 -[[image:image-20240510161626-17.png||height="192" width="224"]]
462 + image 5.20 ui_water_leak.c (1) after modification
476 476  
477 -* Alarm button
464 +[[image:image-20241122113259-33.png||height="874" width="724"]]
478 478  
479 -Press the button PB01 will immediately uplink data, and alarm is "TRUE".
466 + image 5.21 ui_water_leak.c (2) after modification
480 480  
481 -[[image:image-20240705095149-5.png||height="164" width="162"]](% style="display:none" %)
468 +[[image:image-20241122113359-34.png||height="804" width="746"]]
482 482  
470 + image 5.22 ui_water_leak.c (3) after modification
483 483  
484 -== 2.8 LED Indicator ==
472 +**10. Modify ui_water_leak_events.h file.** The image 5.23 show the code before modification, and the image 5.24 show the code after modification.
485 485  
474 +[[image:image-20241122134113-35.png||height="380" width="421"]]
486 486  
487 -(((
488 -The PB01 has a triple color LED which for easy showing different stage.
489 -)))
476 + image 5.23 ui_water_leak_events_.h before modification
490 490  
491 -Hold the ACT green light to rest, then the green flashing node restarts, the blue flashing once upon request for network access, and the green constant light for 5 seconds after successful network access
478 +[[image:image-20241122134420-37.png||height="201" width="283"]]
492 492  
493 -(((
494 -(% style="color:#037691" %)**In a normal working state**:
495 -)))
480 +image 5.24 ui_water_leak_events_.h after modification
496 496  
497 -* When the node is restarted, hold the ACT (% style="color:green" %)**GREEN**(%%) lights up , then the (% style="color:green" %)**GREEN**(%%) flashing node restarts.The (% style="color:blue" %)**BLUE**(%%) flashing once upon request for network access, and the (% style="color:green" %)**GREEN**(%%) constant light for 5 seconds after successful network access(% style="color:#0000ff" %)**.**
498 -* During OTAA Join:
499 -** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.
500 -** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.
501 -* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.
502 -* Press the alarm button，The (% style="color:red" %)**RED**(%%) flashes until the node receives the ACK from the platform and the (% style="color:blue" %)**BLUE**(%%) light stays 5s.
482 +**11. Modify ui_water_leak_events.c file.** The image 5.25 show the code before modification, and the image 5.26 show the code after modification.
503 503  
504 -(((
505 -
506 -)))
484 +Step1. '#include "ui.h"'~-~->'#include "ui_water_leak.h"'
507 507  
508 -== 2.9 Buzzer ==
486 +Step2. add code  below in delete_object() function definition.
509 509  
488 + panel_all * panel = find_upper_by_SensorPanel(&arr,((lv_obj_t *)(e->user_data~)~)~);
510 510  
511 -The PB01 has** button sound** and** ACK sound** and users can turn on or off both sounds by using [[AT+SOUND>>||anchor="H3.3A0Setbuttonsoundandbuttonalarm"]].
490 + size_t index = panel->panel_obj_index;
512 512  
513 -* (% style="color:#4f81bd" %)**Button sound**(%%)** **is the music produced by the node after the alarm button is pressed.
492 + deleteElement(&arr, index);
514 514  
515 - Users can use[[ AT+OPTION>>||anchor="H3.4A0Setbuzzermusic2807E429"]] to set different button sounds.
494 +[[image:image-20241122135023-38.png||height="358" width="372"]]
516 516  
517 -* (% style="color:#4f81bd" %)**ACK sound **(%%)is the notification tone that the node receives ACK.
496 + image 5.25 ui_water_leak_events_.c before modification
518 518  
519 -= 3.  Configure PB01 via AT command or LoRaWAN downlink =
498 +[[image:image-20241122135258-39.png||height="403" width="559"]]
520 520  
500 + image 5.26 ui_water_leak_events_.c after modification
521 521  
522 -Users can configure PB01 via AT Command or LoRaWAN Downlink.
502 +**12. Modify ui_water_leak_style.c file.**
523 523  
524 -* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
504 +Step1. '#include "../ui.h"'~-~->#include '"../ui_water_leak.h"'
525 525  
526 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
506 + add '#include "../../sort.h"'
527 527  
528 -There are two kinds of commands to configure PB01, they are:
508 + add '#include "ui.h"'
529 529  
530 -* (% style="color:#4f81bd" %)**General Commands:**
510 +[[image:image-20241122141536-41.png||height="361" width="612"]]
531 531  
532 -These commands are to configure:
512 + image 5.27 ui_water_leak_style.c (1) before modification
533 533  
534 -* General system settings like: uplink interval.
514 +[[image:image-20241122142129-42.png||height="386" width="613"]]
535 535  
536 -* LoRaWAN protocol & radio-related commands.
516 + image 5.28 ui_water_leak_style.c (1) after modification
537 537  
538 -They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
518 +Step2. modify 'void ui_ScreenMain_screen_init(void)'~-~->'panel_with_type create_water_leak(uint8_t index)'
539 539  
520 + delete code as shown in image 5.29
540 540  
541 -* (% style="color:#4f81bd" %)**Commands special design for PB01**
522 +[[image:image-20241122145620-44.png||height="757" width="671"]]
542 542  
543 -These commands are only valid for PB01, as below:
524 + image 5.29 ui_water_leak_style.c (2)
544 544  
545 -(% style="display:none" %) (%%)
526 +Step3. The image 5.30, 5.31 show the change.
546 546  
547 -== 3.1  Downlink Command Set ==
528 +[[image:image-20241122152026-45.png||height="277" width="828"]]
548 548  
530 + image 5.30 ui_water_leak_style.c (3) before modification
549 549  
550 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
551 -|=(% style="width: 130px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 151px; background-color: rgb(79, 129, 189); color: white;" %)**Function**|=(% style="width: 92px; background-color: rgb(79, 129, 189); color: white;" %)**Response**|=(% style="width: 206px; background-color: rgb(79, 129, 189); color: white;" %)**Downlink**
552 -|(% style="width:130px" %)AT+TDC=?|(% style="width:151px" %)(((
553 -
532 +[[image:image-20241122152542-46.png||height="293" width="830"]]
554 554  
555 -View current TDC time
556 -)))|(% style="width:92px" %)(((
557 -1200000
558 -OK
559 -)))|(% style="width:206px" %)Default 1200000(ms)
560 -|(% style="width:130px" %)AT+TDC=300000|(% style="width:151px" %)Set TDC time|(% style="width:92px" %)OK|(% style="width:206px" %)(((
561 -(((
562 -0X0100012C:
563 -01: fixed command
564 -00012C: 0X00012C=
534 + image 5.31 ui_water_leak_style.c (3) after modification
565 565  
566 -300(seconds)
567 -)))
536 +Step4. Copy partly the code in ui_water_leak.c, paste at extra_lib/sort.h(The process is shown in image 5.32, 5.33).
568 568  
569 -(((
570 -
571 -)))
572 -)))
573 -|(% style="width:130px" %)ATZ|(% style="width:151px" %)Reset node|(% style="width:92px" %) |(% style="width:206px" %)0x04FF
574 -|(% style="width:130px" %)AT+FDR|(% style="width:151px" %)Restore factory settings|(% style="width:92px" %) |(% style="width:206px" %)0X04FE
575 -|(% style="width:130px" %)AT+CFM=?|(% style="width:151px" %)View the current confirmation mode status|(% style="width:92px" %)(((
576 -0,7,0
538 +[[image:image-20241122153958-47.png]]
577 577  
578 -OK
579 -)))|(% style="width:206px" %)Default 0,7,0
580 -|(% style="width:130px" %)AT+CFM=1,7,1|(% style="width:151px" %)(((
581 -Confirmed uplink mode, the maximum number of retries is seven, and uplink fcnt increase by 1 for each retry
582 -)))|(% style="width:92px" %)(((
583 -OK
584 -)))|(% style="width:206px" %)(((
585 -05010701
540 + image 5.32 ui_water_leak_style.c (4)
586 586  
587 -05: fixed command
542 +[[image:image-20241122154755-49.png||height="864" width="513"]]
588 588  
589 -01:confirmed uplink
544 + image 5.33 ui_water_leak_style.c (4)
590 590  
591 -07: retry 7 times
546 +Step5. Delete event function in code which was just pasted in extra_lib/sort.h(The process is shown in image 5.34).
592 592  
593 -01: fcnt count plus 1
594 -)))
595 -|(% style="width:130px" %)AT+NJM=?|(% style="width:151px" %)(((
596 -Check the current network connection method
597 -)))|(% style="width:92px" %)(((
598 -1
599 -OK
600 -)))|(% style="width:206px" %)Default 1
601 -|(% style="width:130px" %)AT+NJM=0|(% style="width:151px" %)Change the network connection method to ABP|(% style="width:92px" %)(((
602 -Attention:Take effect after ATZ
603 -OK
604 -)))|(% style="width:206px" %)(((
605 -0X2000: ABP
606 -0x2001: OTAA
607 -20: fixed command
608 -)))
609 -|(% style="width:130px" %)AT+RPL=?|(% style="width:151px" %)View current RPL settings|(% style="width:92px" %)(((
610 -0
611 -OK
612 -)))|(% style="width:206px" %)Default 0
613 -|(% style="width:130px" %)AT+RPL=1|(% style="width:151px" %)set RPL=1    |(% style="width:92px" %)OK|(% style="width:206px" %)(((
614 -0x2101:
615 -21: fixed command
616 -01: for details, check wiki
617 -)))
618 -|(% style="width:130px" %)AT+ADR=?|(% style="width:151px" %)View current ADR status|(% style="width:92px" %)(((
619 -1
620 -OK
621 -)))|(% style="width:206px" %)Default 0
622 -|(% style="width:130px" %)AT+ADR=0|(% style="width:151px" %)Set the ADR state to off|(% style="width:92px" %)OK|(% style="width:206px" %)(((
623 -0x2200: close
624 -0x2201: open
625 -22: fixed command
626 -)))
627 -|(% style="width:130px" %)AT+DR=?|(% style="width:151px" %)View the current DR settings|(% style="width:92px" %)OK|(% style="width:206px" %)
628 -|(% style="width:130px" %)AT+DR=1|(% style="width:151px" %)(((
629 -set DR to 1
630 -It takes effect only when ADR=0
631 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
632 -0X22000101:
633 -00: ADR=0
634 -01: DR=1
635 -01: TXP=1
636 -22: fixed command
637 -)))
638 -|(% style="width:130px" %)AT+TXP=?|(% style="width:151px" %)View the current TXP|(% style="width:92px" %)OK|(% style="width:206px" %)
639 -|(% style="width:130px" %)AT+TXP=1|(% style="width:151px" %)(((
640 -set TXP to 1
641 -It takes effect only when ADR=0
642 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
643 -0X22000101:
644 -00: ADR=0
645 -01: DR=1
646 -01: TXP=1
647 -22: fixed command
648 -)))
649 -|(% style="width:130px" %)AT+RJTDC=10|(% style="width:151px" %)Set RJTDC time interval|(% style="width:92px" %)OK|(% style="width:206px" %)(((
650 -0X26000A:
651 -26: fixed command
652 -000A: 0X000A=10(min)
653 -for details, check wiki
654 -)))
655 -|(% style="width:130px" %) |(% style="width:151px" %)(((
656 -(((
657 -~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
548 +[[image:image-20241122155650-50.png||height="922" width="513"]]
658 658  
659 -Retrieve stored data for a specified period of time
660 -)))
550 + image 5.34 ui_water_leak_style.c (5)
661 661  
662 -(((
663 -
664 -)))
665 -)))|(% style="width:92px" %) |(% style="width:206px" %)(((
666 -0X3161DE7C7061DE8A800A:
667 -31: fixed command
668 -61DE7C70:0X61DE7C70=2022/1/12 15:00:00
669 -61DE8A80:0X61DE8A80=2022/1/12 16:00:00
670 -0A: 0X0A=10(second)
671 -View details 2.6.2
672 -)))
673 -|(% style="width:130px" %)AT+DDETECT=?|(% style="width:151px" %)View the current DDETECT setting status and time|(% style="width:92px" %)(((
674 -1,1440,2880
675 -OK
676 -)))|(% style="width:206px" %)Default 1,1440,2880(min)
677 -|(% style="width:130px" %)AT+DDETECT=(((
678 -1,1440,2880
679 -)))|(% style="width:151px" %)(((
680 -Set DDETECT setting status and time
681 -((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))
682 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
683 -0X320005A0: close
684 -0X320105A0: open
685 -32: fixed command
686 -05A0: 0X05A0=1440(min)
687 -)))
552 +Step6. Add some lines of code in extra_lib/sort.h as shown in image 5.35.
688 688  
689 -== 3.2  Set Password ==
554 +[[image:image-20241122161934-51.png]]
690 690  
556 + image 5.35
691 691  
692 -Feature: Set device password, max 9 digits.
558 +Step7. Add a line of code in extra_lib/sort.h as shown in image 5.36.
693 693  
694 -(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
560 +[[image:image-20241122162852-53.png||height="330" width="529"]]
695 695  
696 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
697 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
698 -|(% style="width:155px" %)AT+PWORD=?|(% style="width:124px" %)Show password|(% style="width:86px" %)(((
699 -123456
700 -OK
701 -)))
702 -|(% style="width:155px" %)AT+PWORD=999999|(% style="width:124px" %)Set password|(% style="width:86px" %)OK
562 + image 5.37
703 703  
704 -(% style="color:#4f81bd" %)**Downlink Command:**
564 +Step8. Add some code in ui_water_leak_style.c as shown in image 5.38 from line534 to line 576 in detail.
705 705  
706 -No downlink command for this feature.
566 +panel_with_type union_sensor;
707 707  
568 +union_sensor.panel_type = WATER_LEAK_TYPE;
708 708  
709 -== 3.3  Set button sound and ACK sound ==
570 +......
710 710  
572 +lv_obj_set_x(union_sensor.panel_union.door.ui_PanelSensorDoor, x_by_index(index));
711 711  
712 -Feature: Turn on/off button sound and ACK alarm.
574 +lv_obj_set_y(union_sensor.panel_union.door.ui_PanelSensorDoor, y_by_index(index));
713 713  
714 -(% style="color:#4f81bd" %)**AT Command: AT+SOUND**
576 +return union_sensor;
715 715  
716 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
717 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
718 -|(% style="width:155px" %)(((
719 -AT+SOUND=?
720 -)))|(% style="width:124px" %)Get the current status of button sound and ACK sound|(% style="width:86px" %)(((
721 -1,1
722 -OK
723 -)))
724 -|(% style="width:155px" %)(((
725 -AT+SOUND=0,1
726 -)))|(% style="width:124px" %)Turn off the button sound and turn on ACK sound|(% style="width:86px" %)OK
578 +[[image:image-20241122171211-54.png||height="635" width="792"]]
727 727  
728 -(% style="color:#4f81bd" %)**Downlink Command: 0xA1 **
580 + image 5.38
729 729  
730 -Format: Command Code (0xA1) followed by 2 bytes mode value.
582 +**13. Modify sort.c file.**
731 731  
732 -The first byte after 0XA1 sets the button sound, and the second byte after 0XA1 sets the ACK sound.** (0: off, 1: on)**
584 +Add a line of code ~-~-'#include "ui_water_leak.h"' as shown in image 5.39 line 16.
733 733  
734 -* **Example: **Downlink Payload: A10001  ~/~/ Set AT+SOUND=0,1  Turn off the button sound and turn on ACK sound.
586 +[[image:image-20241122173718-56.png||height="378" width="579"]]
735 735  
736 -== 3.4  Set buzzer music type(0~~4) ==
588 + image 5.39 sort.c (1)
737 737  
590 +There are still some changes need to be done in sort.c, and omit here for the moment.
738 738  
739 -Feature: Set different alarm key response sounds.There are five different types of button music.
740 740  
741 -(% style="color:#4f81bd" %)**AT Command: AT+OPTION**
742 -
743 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
744 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
745 -|(% style="width:155px" %)(((
746 -AT+OPTION=?
747 -)))|(% style="width:124px" %)(((
748 -Get the buzzer music type
749 -)))|(% style="width:86px" %)(((
750 -3
751 -
752 -OK
753 -)))
754 -|(% style="width:155px" %)AT+OPTION=1|(% style="width:124px" %)Set the buzzer music to type 1|(% style="width:86px" %)OK
755 -
756 -(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
757 -
758 -Format: Command Code (0xA3) followed by 1 byte mode value.
759 -
760 -* **Example: **Downlink Payload: A300  ~/~/ Set AT+OPTION=0  Set the buzzer music to type 0.
761 -
762 -== 3.5  Set Valid Push Time ==
763 -
764 -
765 -Feature: Set the holding time for pressing the alarm button to avoid miscontact. Values range from** 0 ~~1000ms**.
766 -
767 -(% style="color:#4f81bd" %)**AT Command: AT+STIME**
768 -
769 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
770 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
771 -|(% style="width:155px" %)(((
772 -AT+STIME=?
773 -)))|(% style="width:124px" %)(((
774 -Get the button sound time
775 -)))|(% style="width:86px" %)(((
776 -0
777 -OK
778 -)))
779 -|(% style="width:155px" %)(((
780 -AT+STIME=1000
781 -)))|(% style="width:124px" %)Set the button sound time to 1000**ms**|(% style="width:86px" %)OK
782 -
783 -(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
784 -
785 -Format: Command Code (0xA2) followed by 2 bytes mode value.
786 -
787 -* **Example: **Downlink Payload: A203E8  ~/~/ Set AT+STIME=1000  
788 -
789 -**~ Explain: **Hold the alarm button for 10 seconds before the node will send the alarm packet.
790 -
791 -
792 -
793 -= 4.  Battery & How to replace =
794 -
795 -== 4.1  Battery Type and replace ==
796 -
797 -
798 -PB01 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). Users can buy generic AAA battery and replace it.
799 -
800 -(% style="color:red" %)**Note: **
801 -
802 -1.  The PB01 doesn't have any screw, users can use nail to open it by the middle.
803 -
804 -[[image:image-20220621143535-5.png]]
805 -
806 -
807 -2.  Make sure the direction is correct when install the AAA batteries.
808 -
809 -[[image:image-20220621143535-6.png]]
810 -
811 -
812 -== 4.2  Power Consumption Analyze ==
813 -
814 -
815 -Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
816 -
817 -Instruction to use as below:
818 -
819 -(% style="color:blue" %)**Step 1**(%%):  Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
820 -
821 -[[battery calculator>>https://www.dropbox.com/sh/sxrgszkac4ips0q/AAA4XjBI3HAHNpdbU3ALN1j0a/Battery%20Document/Battery_Analyze?dl=0&subfolder_nav_tracking=1]]
822 -
823 -
824 -(% style="color:blue" %)**Step 2**(%%):  (% style="display:none" %) (%%)Open it and choose
825 -
826 -* Product Model
827 -* Uplink Interval
828 -* Working Mode
829 -
830 -And the Life expectation in difference case will be shown on the right.
831 -
832 -[[image:image-20220621143643-7.png||height="429" width="1326"]]
833 -
834 -
835 -= 5.  Accessories =
836 -
837 -
838 -* (((
839 -(% class="wikigeneratedid" id="H5.2A0ProgramConverter28AS-0229" %)
840 -**Program Converter (AS-02)**
841 -)))
842 -
843 -AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:
844 -
845 -1. Access AT console of PB01 when used with USB-TTL adapter. [[See this link>>||anchor="H6.1HowtouseATCommandtoconfigurePB01"]].
846 -
847 -[[image:image-20220621141724-3.png]]
848 -
849 -
850 850  = 6. FAQ =
851 851  
852 -== 6.1 How to use AT Command to configure PB01 ==
595 +== 6.1 ==
853 853  
854 854  
855 -PB01 supports AT Command set. Users can use a USB to TTL adapter plus the Program Cable to connect to PB01 for using AT command, as below.
856 -
857 -[[image:image-20240511085914-1.png||height="570" width="602"]]
858 -
859 -
860 -**Connection:**
861 -
862 -* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin
863 -* (% style="background-color:yellow" %)USB to TTL RXD  <~-~-> Program Converter D+ pin
864 -* (% style="background-color:yellow" %)USB to TTL TXD  <~-~-> Program Converter A11 pin
865 -
866 -(((
867 -In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for PB01. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.
868 -)))
869 -
870 -(((
871 -Input password and ATZ to activate PB01, as shown below:
872 -)))
873 -
874 -[[image:image-20240510174509-18.png||height="572" width="791"]]
875 -
876 -
877 -== 6.2  AT Command and Downlink ==
878 -
879 -
880 -(((
881 -Sending ATZ will reboot the node
882 -)))
883 -
884 -(((
885 -Sending AT+FDR will restore the node to factory settings
886 -)))
887 -
888 -(((
889 -Get the node's AT command setting by sending AT+CFG
890 -)))
891 -
892 -(((
893 -
894 -)))
895 -
896 -(((
897 -**Example：**                                           
898 -)))
899 -
900 -(((
901 -AT+DEUI=FA 23 45 55 55 55 55 51
902 -
903 -AT+APPEUI=FF AA 23 45 42 42 41 11
904 -
905 -AT+APPKEY=AC D7 35 81 63 3C B6 05 F5 69 44 99 C1 12 BA 95
906 -
907 -AT+DADDR=FFFFFFFF
908 -
909 -AT+APPSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
910 -
911 -AT+NWKSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
912 -
913 -AT+ADR=1
914 -
915 -AT+TXP=7
916 -
917 -AT+DR=5
918 -
919 -AT+DCS=0
920 -
921 -AT+PNM=1
922 -
923 -AT+RX2FQ=869525000
924 -
925 -AT+RX2DR=0
926 -
927 -AT+RX1DL=5000
928 -
929 -AT+RX2DL=6000
930 -
931 -AT+JN1DL=5000
932 -
933 -AT+JN2DL=6000
934 -
935 -AT+NJM=1
936 -
937 -AT+NWKID=00 00 00 13
938 -
939 -AT+FCU=61
940 -
941 -AT+FCD=11
942 -
943 -AT+CLASS=A
944 -
945 -AT+NJS=1
946 -
947 -AT+RECVB=0:
948 -
949 -AT+RECV=
950 -
951 -AT+VER=EU868 v1.0.0
952 -
953 -AT+CFM=0,7,0
954 -
955 -AT+SNR=0
956 -
957 -AT+RSSI=0
958 -
959 -AT+TDC=1200000
960 -
961 -AT+PORT=2
962 -
963 -AT+PWORD=123456
964 -
965 -AT+CHS=0
966 -
967 -AT+RX1WTO=24
968 -
969 -AT+RX2WTO=6
970 -
971 -AT+DECRYPT=0
972 -
973 -AT+RJTDC=20
974 -
975 -AT+RPL=0
976 -
977 -AT+TIMESTAMP=systime= 2024/5/11 01:10:58 (1715389858)
978 -
979 -AT+LEAPSEC=18
980 -
981 -AT+SYNCMOD=1
982 -
983 -AT+SYNCTDC=10
984 -
985 -AT+SLEEP=0
986 -
987 -AT+ATDC=1
988 -
989 -AT+UUID=003C0C53013259E0
990 -
991 -AT+DDETECT=1,1440,2880
992 -
993 -AT+SETMAXNBTRANS=1,0
994 -
995 -AT+DISFCNTCHECK=0
996 -
997 -AT+DISMACANS=0
998 -
999 -AT+PNACKMD=0
1000 -
1001 -AT+SOUND=0,0
1002 -
1003 -AT+STIME=0
1004 -
1005 -AT+OPTION=3
1006 -)))
1007 -
1008 -(((
1009 -**Example：**
1010 -)))
1011 -
1012 -[[image:image-20240511091518-2.png||height="601" width="836"]]
1013 -
1014 -
1015 -== 6.3  How to upgrade the firmware? ==
1016 -
1017 -
1018 -PB01 requires a program converter to upload images to PB01, which is used to upload image to PB01 for:
1019 -
1020 -* Support new features
1021 -* For bug fix
1022 -* Change LoRaWAN bands.
1023 -
1024 - PB01 internal program is divided into bootloader and work program, shipping is included bootloader, the user can choose to directly update the work program.
1025 -
1026 -If the bootloader is erased for some reason, users will need to download the boot program and the work program.
1027 -
1028 -
1029 -=== 6.3.1 Update firmware (Assume device have bootloader) ===
1030 -
1031 -
1032 -(% style="color:blue" %)**Step 1**(%%):** Connect UART as per FAQ 6.1**
1033 -
1034 -(% style="color:blue" %)**Step 2**(%%):** Update follow [[Instruction for update via DraginoSensorManagerUtility.exe>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]. **
1035 -
1036 -
1037 -=== 6.3.2 Update firmware (Assume device doesn't have bootloader) ===
1038 -
1039 -
1040 -Download both the boot program and the worker program** . **After update , device will have bootloader so can use above 6.3.1 method to update woke program.
1041 -
1042 -(% style="color:blue" %)**Step 1**(%%):** **Install [[TremoProgrammer>>url:https://www.dropbox.com/scl/fo/gk1rb5pnnjw4kv5m5cs0z/h?rlkey=906ouvgbvif721f9bj795vfrh&dl=0]]  first.
1043 -
1044 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220615170542-5.png?rev=1.1||alt="image-20220615170542-5.png"]]
1045 -
1046 -(% style="color:blue" %)**Step 2**(%%): Hardware Connection
1047 -
1048 -Connect PC and PB01 via USB-TTL adapter .
1049 -
1050 -(% style="color:red" %)**Note: To download firmware in this way, you need to pull the boot pin(Program Converter D- pin) high to enter the burn mode. After burning, disconnect the boot pin of the node and the 3V3 pin of the USB-TTL adapter, and reset the node to exit the burning mode.**
1051 -
1052 -**Connection:**
1053 -
1054 -* (% style="background-color:yellow" %)USB-TTL GND <~-~-> Program Converter GND pin
1055 -* (% style="background-color:yellow" %)USB-TTL RXD  <~-~-> Program Converter D+ pin
1056 -* (% style="background-color:yellow" %)USB-TTL TXD  <~-~-> Program Converter A11 pin
1057 -* (% style="background-color:yellow" %)USB-TTL 3V3 <~-~-> Program Converter D- pin
1058 -
1059 -(% style="color:blue" %)**Step 3**(%%):** **Select the device port to be connected, baud rate and bin file to be downloaded.
1060 -
1061 -[[image:image-20240701160913-1.png]]
1062 -
1063 -Users need to reset the node to start downloading the program.
1064 -~1. Reinstall the battery to reset the node
1065 -2. Hold down the ACT button to reset the node (see [[2.7>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/PB01--LoRaWAN_Button_User_Manual/#H2.7Button]] ).
1066 -
1067 -When this interface appears, it indicates that the download has been completed.
1068 -
1069 -[[image:image-20240701160924-2.png]]
1070 -
1071 -Finally, Disconnect Program Converter D- pin, reset the node again , and the node exits burning mode.
1072 -
1073 -
1074 -== 6.4  How to change the LoRa Frequency Bands/Region? ==
1075 -
1076 -
1077 -User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.
1078 -
1079 -
1080 -== 6.5 Why i see different working temperature for the device? ==
1081 -
1082 -
1083 -The working temperature range of device depends on the battery user choose.
1084 -
1085 -* Normal AAA Battery can support -10 ~~ 50°C working range.
1086 -* Special AAA battery can support -40 ~~ 60 °C working range. For example: [[Energizer L92>>https://data.energizer.com/pdfs/l92.pdf]]
1087 -
1088 1088  = 7. Order Info =
1089 1089  
1090 -== 7.1  Main Device ==
600 +== 7.1  Part Number ==
1091 1091  
1092 1092  
1093 -Part Number: (% style="color:#4472c4" %)PB01-LW-XX(%%) (white button) / (% style="color:#4472c4" %)PB01-LR-XX(%%)(Red Button)
603 +Part Number: (% style="color:#4472c4" %)LTS5
1094 1094  
1095 -(% style="color:#4472c4" %)**XX **(%%): The default frequency band
1096 1096  
1097 -* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band
1098 -* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band
1099 -* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band
1100 -* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band
1101 -* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band
1102 -* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band
1103 -* (% style="color:red" %)**IN865**(%%)**:  **LoRaWAN IN865 band
1104 -* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band
606 +== 7.2  Packing Info ==
1105 1105  
1106 -= 7. Packing Info =
1107 1107  
1108 -
1109 1109  **Package Includes**:
1110 1110  
1111 -* PB01 LoRaWAN Push Button x 1
611 +* LTS5 HMI Touch Screen
612 +* 5V,2A DC Power Adapter.
613 +* USB Type C Program Cable
1112 1112  
1113 1113  = 8. Support =
1114 1114  
... ... @@ -1119,7 +1119,9 @@
1119 1119  = 9.  Reference material =
1120 1120  
1121 1121  
1122 -* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/scl/fo/y7pvm58wcr8319d5o4ujr/APZtqlbzRCNbHoPWTmmMMWs?rlkey=wfh93x2dhcev3ydn0846rinf0&st=kdp6lg7t&dl=0]]
624 +* Datasheet
625 +* Source Code
626 +* Mechinical
1123 1123  
1124 1124  = 10. FCC Warning =
1125 1125  
1727229396732-319.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +197.2 KB
Content
1727229550717-684.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +113.9 KB
Content
1727229582471-566.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +73.6 KB
Content
1727229618724-758.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +118.7 KB
Content
1727229653254-680.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +116.2 KB
Content
1727229682537-381.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +51.5 KB
Content
1727229715361-392.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +75.2 KB
Content
1727229740592-843.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +87.3 KB
Content
1727229760857-521.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content
1727229798126-306.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +53.6 KB
Content
1727229821582-258.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +76.1 KB
Content
1727229845835-509.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
1727229892636-154.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +192.0 KB
Content
1727229926561-300.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +178.0 KB
Content
1727229955611-607.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +100.4 KB
Content
1727229990795-405.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +383.6 KB
Content
1727230012478-930.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +477.1 KB
Content
1727231038705-173.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +94.6 KB
Content
1727233636007-933.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +114.8 KB
Content
1727484665746-713.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +94.9 KB
Content
1727485118799-984.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +11.8 KB
Content
1727485251053-655.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
1727485480434-713.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content
1727485933579-550.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
1727485953726-175.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +91.6 KB
Content
1727486567182-334.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
1727486578489-774.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +66.0 KB
Content
1727487368023-281.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +28.5 KB
Content
1727488067077-684.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +604.7 KB
Content
1727488099947-341.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
1727488108117-780.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
1727488157579-949.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
image-20240916101737-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +156.7 KB
Content
image-20240925110638-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +262.7 KB
Content
image-20240928090825-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +30.2 KB
Content
image-20240928103357-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +153.7 KB
Content
image-20240928103506-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +197.7 KB
Content
image-20240928105309-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +80.2 KB
Content
image-20240928110211-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +228.0 KB
Content
image-20240928111412-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +150.9 KB
Content
image-20240928111654-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +105.4 KB
Content
image-20240928112001-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20240928113424-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +50.8 KB
Content
image-20240928114139-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20240928144830-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20241121113445-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +250.0 KB
Content
image-20241121120222-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +44.8 KB
Content
image-20241121120830-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
image-20241121141120-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +41.7 KB
Content
image-20241121141315-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
image-20241121141329-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
image-20241121142925-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.8 KB
Content
image-20241121145915-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +61.0 KB
Content
image-20241121150911-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +73.0 KB
Content
image-20241121151934-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20241121171629-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +16.9 KB
Content
image-20241121171901-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +17.2 KB
Content
image-20241121172714-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +26.4 KB
Content
image-20241121172908-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +27.1 KB
Content
image-20241121180030-15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +27.7 KB
Content
image-20241121180517-16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +26.5 KB
Content
image-20241121181957-17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +59.3 KB
Content
image-20241121182239-18.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +71.3 KB
Content
image-20241122092239-19.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +270.9 KB
Content
image-20241122092655-20.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +251.6 KB
Content
image-20241122093445-21.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +128.9 KB
Content
image-20241122093601-22.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +120.0 KB
Content
image-20241122094200-23.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +289.2 KB
Content
image-20241122094320-24.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +182.4 KB
Content
image-20241122094600-25.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +136.0 KB
Content
image-20241122094719-26.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +129.5 KB
Content
image-20241122102929-27.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +219.9 KB
Content
image-20241122104344-28.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +257.1 KB
Content
image-20241122110815-29.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +246.1 KB
Content
image-20241122112838-30.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +263.9 KB
Content
image-20241122113158-31.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +133.7 KB
Content
image-20241122113252-32.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +152.3 KB
Content
image-20241122113259-33.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +152.3 KB
Content
image-20241122113359-34.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +126.5 KB
Content
image-20241122134113-35.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +69.3 KB
Content
image-20241122134412-36.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20241122134420-37.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20241122135023-38.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20241122135258-39.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +40.3 KB
Content
image-20241122141526-40.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +78.8 KB
Content
image-20241122141536-41.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +78.8 KB
Content
image-20241122142129-42.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +85.1 KB
Content
image-20241122143105-43.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +60.2 KB
Content
image-20241122145620-44.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +394.0 KB
Content
image-20241122152026-45.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +201.6 KB
Content
image-20241122152542-46.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +95.3 KB
Content
image-20241122153958-47.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +241.1 KB
Content
image-20241122154745-48.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +135.7 KB
Content
image-20241122154755-49.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +135.7 KB
Content
image-20241122155650-50.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +104.4 KB
Content
image-20241122161934-51.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +230.3 KB
Content
image-20241122162612-52.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +58.7 KB
Content
image-20241122162852-53.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +125.5 KB
Content
image-20241122171211-54.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +173.3 KB
Content
image-20241122173706-55.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
image-20241122173718-56.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
squalreline-trial.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +60.4 KB
Content
squareline.io_downloads.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 MB
Content