Skip to Content
Last modified by BoYang Xie on 2025/07/09 11:46
From version 3.1
edited by Edwin Chen
on 2024/09/15 23:18
Change comment: Uploaded new attachment "image-20240915231842-1.png", version {1}
To version 76.1
edited by BoYang Xie
on 2024/11/22 09:22
Change comment: Uploaded new attachment "image-20241122092239-19.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LTS5 LoRa Touch Screen
1 +LTS5 LoRa HMI Touch Screen
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.xieby
Content
... ... @@ -1,12 +1,14 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20240705094013-3.png]]
2 +[[image:image-20240915231842-1.png]]
3 3  
4 4  
5 5  
6 6  
7 7  
8 +
9 +
8 8  (% _mstvisible="1" %)
9 -(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
11 +(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents:**
10 10  
11 11  {{toc/}}
12 12  
... ... @@ -19,64 +19,77 @@
19 19  
20 20  = 1.  Introduction =
21 21  
22 -== 1.1  What is PB01 LoRaWAN Push Button ==
24 +== 1.1  What is LTS5 LoRa HMI touch screen ==
23 23  
24 24  
25 -PB01 LoRaWAN Button is a LoRaWAN wireless device with one (% style="color:blue" %)**push button**(%%). Once user push the button, PB01 will transfer the signal to IoT server via Long Range LoRaWAN wireless protocol. PB01 also senses the (% style="color:blue" %)**environment temperature & humidity**(%%) and will also uplink these data to IoT Server.
27 +LTS5 is a (% style="color:blue" %)LoRa / LoRaWAN HMI Touch Screen(%%) designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.
26 26  
27 -PB01 supports (% style="color:blue" %)** 2 x AAA batteries**(%%) and works for a long time up to several years*. User can replace the batteries easily after they are finished.
29 +LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.
28 28  
29 -PB01 has a built-in speaker, it can pronouns different sound when press button and get reply from server. The speaker can by disable if user want it.
31 +The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the display UI for different application.
30 30  
31 -PB01 is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.
33 +LTS5 use LA66 LoRa module, this module can be program to support private LoRa protocol or LoRaWAN protocol.
32 32  
33 -*Battery life depends how often to send data, please see [[battery analyzer>>||anchor="H4.2A0PowerConsumptionAnalyze"]].
34 34  
35 -
36 36  == 1.2  Features ==
37 37  
38 -
38 +* ESP32-WROOM MCU: 8MB RAM & 16MB ROM
39 +* Dragino LA66 LoRa Module
40 +* Support Private LoRa protocol or LoRaWAN protocol
41 +* Support WiFi & BLE wireless protocol
42 +* 5.0" HMI touch screen
43 +* Support LVGL case. SquareLine program.
44 +* Support RS485 Interface
45 +* Open Source Project
39 39  * Wall Attachable.
40 -* LoRaWAN v1.0.3 Class A protocol.
41 -* 1 x push button. Different Color available.
42 -* Built-in Temperature & Humidity sensor
43 -* Built-in speaker
44 -* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
45 -* AT Commands to change parameters
46 -* Remote configure parameters via LoRaWAN Downlink
47 -* Firmware upgradable via program port
48 -* Support 2 x AAA LR03 batteries.
47 +* 5V DC power
49 49  * IP Rating: IP52
50 50  
51 51  == 1.3  Specification ==
52 52  
53 53  
54 -**Built-in Temperature Sensor:**
53 +**LoRa**:
55 55  
56 -* Resolution: 0.01 °C
57 -* Accuracy Tolerance: Typ ±0.2 °C
58 -* Long Term Drift: < 0.03 °C/yr
59 -* Operating Range: -10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
55 +* Frequency Range: 870 MHz ~~ 960 MHz
56 +* TCXO crystal to ensure RF performance on low temperature
57 +* Maximum Power +22 dBm constant RF output
58 +* High sensitivity: -148 dBm
59 +* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
60 +* LoRa Rx current: <9 mA
60 60  
61 -**Built-in Humidity Sensor:**
62 +**WiFi:**
62 62  
63 -* Resolution: 0.01 %RH
64 -* Accuracy Tolerance: Typ ±1.8 %RH
65 -* Long Term Drift: < 0.2% RH/yr
66 -* Operating Range: 0 ~~ 99.0 %RH(no Dew)
64 +* 802.11b/g/n
65 +* Up to 150 Mbps data rate in 802.11n mode
66 +* Support A-MPDU and A-MSDU aggregation
67 +* zero point four μ S protection interval
68 +* Working channel center frequency range: 2412~~2484 MHz
67 67  
68 -== 1.4  Power Consumption ==
70 +**Bluetooth:**
69 69  
72 +* Bluetooth V4.2 BR/EDR and Bluetooth LE standard
73 +* Class-1, Class-2, and Class-3 transmitters.
74 +* AFH
75 +* CVSD and SBC
70 70  
71 -PB01 : Idle: 5uA, Transmit: max 110mA
77 +**Display:**
72 72  
79 +* 5.0 Inch , 800 x 480
80 +* IPS Capacitive Touch SCreen
81 +* RGB color.
82 +* Display Area: 120.7*75.80 mm
73 73  
74 -== 1.5  Storage & Operation Temperature ==
84 +== 1.4  Power Consumption ==
75 75  
76 76  
77 --10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
87 +* External 5V DC power adapter
78 78  
89 +== 1.5  Storage & Operation Temperature ==
79 79  
91 +
92 +* Operation Temperature: -20 ~~ 70°C  (No Dew)
93 +* Storage Temperature: -30 ~~ 70°C  (No Dew)
94 +
80 80  == 1.6  Applications ==
81 81  
82 82  
... ... @@ -87,1037 +87,301 @@
87 87  * Smart Cities
88 88  * Smart Factory
89 89  
90 -= 2.  Operation Mode =
105 += 2.  Getting Started with Hello World =
91 91  
92 -== 2.1  How it work? ==
107 +== 2.1  About this demo ==
93 93  
94 94  
95 -Each PB01 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use PB01 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if PB01 is under this LoRaWAN network coverage, PB01 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.
110 +In this Getting Started Example, we will show how to design a simple Display UI and upload it to LTS5. This UI has  a button , when user click the button. The Web UI will jump to a new page.
96 96  
97 97  
98 -== 2.2  How to Activate PB01? ==
113 +== 2.2  Install Software Running Environment ==
99 99  
115 +The ESP MCU can be developed using ESP-IDF, Arduino, or MicroPython. For this project, we utilize ESP-IDF for compilation and Visual Studio Code (VSCode) for editing.
100 100  
101 -(% style="color:red" %)** 1.  Open enclosure from below position.**
117 +=== 2.2.1 Install VSCode and ESP-IDF extension ===
102 102  
103 -[[image:image-20220621093835-1.png]]
104 104  
120 +Firstly, download and install VSCode for your computer's operating system from the official website: [[Download Visual Studio Code - Mac, Linux, Windows>>url:https://code.visualstudio.com/download]].
105 105  
106 -(% style="color:red" %)** 2.  Insert 2 x AAA LR03 batteries and the node is activated.**
122 +Next, you need to install the ESP-IDF extension within VSCode. The detailed operation steps are illustrated in image 1.
107 107  
108 -[[image:image-20220621093835-2.png]]
124 +[[image:image-20240928110211-5.png||height="508" width="866"]]
109 109  
126 + image 1 ESP-IDF extension install
110 110  
111 -(% style="color:red" %)** 3. Under the above conditions, users can also reactivate the node by long pressing the ACT button.**
128 +Links for reference: [[Install ESP32 ESP-IDF on Windows and Integrate with VS code (esp32tutorials.com)>>url:https://esp32tutorials.com/install-esp32-esp-idf-windows-integrate-vs-code/#:~~:text=In%20this%20tutorial,%20we%20will%20show%20you%20how%20to%20install]]
112 112  
113 -[[image:image-20220621093835-3.png]]
114 114  
131 +=== 2.2.2 Install SquareLine Studio ===
115 115  
116 -User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of PB01.
117 117  
134 +The version we are utilizing for this software is 1.4.2. You can download it from the official link: [[SquareLine Studio - Download the current version of SquareLine Studio>>url:https://squareline.io/downloads#lastRelease]].
118 118  
119 -== 2.3  Example to join LoRaWAN network ==
136 +Please note that this software necessitates the registration of a license prior to usage, and various licenses come with distinct limitations. For instance, the free version imposes restrictions such as a limit of 1 component, 150 widgets, and 10 screens. However, for first-time downloads, you are granted unrestricted access for a period of 30 days without the need for immediate registration.
120 120  
121 121  
122 -This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
139 +== 2.3 Simple usage of SquareLine Studio and export UI code ==
123 123  
124 -(% _mstvisible="1" class="wikigeneratedid" %)
125 -Assume the LPS8v2 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the PB01 device in TTN V3 portal. 
126 126  
127 -[[image:image-20240705094824-4.png]]
142 +After launching and logging in to this software, create a project as shown in the following image 2. The version of LVGL is 8.3.11.
128 128  
129 -(% style="color:blue" %)**Step 1**(%%):  Create a device in TTN V3 with the OTAA keys from PB01.
144 +[[image:image-20240928103357-2.png||height="680" width="708"]]
130 130  
131 -Each PB01 is shipped with a sticker with the default DEV EUI as below:
146 + image 2 create a SquareLine project
132 132  
133 -[[image:image-20230426083617-1.png||height="294" width="633"]]
148 +Next, we need to make some settings for this project. By clicking in the specified order on image 3, we can see the page as shown in image 4.
134 134  
150 +[[image:1727229582471-566.png]]
135 135  
136 -Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:
152 + image 3 project settings
137 137  
138 -Create application.
154 +[[image:image-20240928105309-4.png||height="526" width="556"]]
139 139  
140 -choose to create the device manually.
156 + image 4 modify project settings
141 141  
142 -Add JoinEUI(AppEUI), DevEUI, AppKey.(% style="display:none" %)
158 +Now we can start to use this software. Here are some usage information for this software.
143 143  
144 -[[image:image-20240507142116-1.png||height="410" width="1138"]](% style="display:none" %) (%%)
145 -
160 +**~1. add widget**
146 146  
147 -[[image:image-20240507142157-2.png||height="559" width="1147"]]
162 +To add a widget, you should click a widget you want to add at the area entitled “Widgets”. In image , demonstrate a add process of label, button, and image 5.
148 148  
149 -[[image:image-20240507142401-3.png||height="693" width="1202"]]
164 +[[image:image-20240928111412-6.png||height="526" width="864"]]
150 150  
151 -[[image:image-20240507142651-4.png||height="760" width="1190"]]
166 + image 5 add widgets
152 152  
153 -**Default mode OTAA**(% style="display:none" %)
168 +**2. modify widget**
154 154  
170 +The area for modifying widgets is called "Inspector". There are four parts in the "Inspector" tab. We use three of them more frequently, excluding "COMPONENT". The second part is aimed at adjusting the layout, size, position, alignment, flags, and states, etc. of widgets. The name of the second part indicates the type of widget it is representing, and in image 6, it is "BUTTON".
155 155  
156 -(% style="color:blue" %)**Step 2**(%%):  Use ACT button to activate PB01 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
172 +[[image:1727485118799-984.png]]
157 157  
158 -[[image:image-20240507143104-5.png||height="434" width="1398"]]
174 + image 6 the button widget's "Inspector" tab
159 159  
176 +Second part: "Layout" means a auto position-management for widgets contained in the parent widget. "Transform" includes size, position and align modification.
160 160  
161 -== 2.4  Uplink Payload ==
178 +[[image:1727485251053-655.png]]
162 162  
180 +image 7 the button widget's "BUTTON" tab
163 163  
164 -Uplink payloads include two types: Valid Sensor Value and other status / control command.
182 +Third part: It is an area of style setting.
165 165  
166 -* Valid Sensor Value: Use FPORT=2
167 -* Other control command: Use FPORT other than 2.
184 +Fourth part: It is an area for adding events. In image 8, it is adding a click event to a button. If the button is clicked after the click event is added as shown in image 8, the current screen will fade into another specified screen, and the switching process will last 500ms.
168 168  
169 -=== 2.4.1  Uplink FPORT~=5, Device Status ===
186 +[[image:1727485480434-713.png||height="395" width="290"]]
170 170  
188 + image 8 add event for button
171 171  
172 -Users can  get the Device Status uplink through the downlink command:
190 +**3. change label widget content**
173 173  
174 -(% style="color:#4472c4" %)**Downlink:  **(%%)**0x2601**
192 +Modify the content in text as shown in image 9, the text content of label widget will be changed accordingly.
175 175  
176 -Uplink the device configures with FPORT=5.
194 +[[image:image-20240928090825-1.png||height="327" width="391"]]
177 177  
178 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:370px" %)
179 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**Size(bytes)(% style="display:none" %) (%%)**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**
180 -|(% style="width:99px" %)Value|(% style="width:62px" %)Sensor Model|(% style="width:80px" %)Firmware Version|(% style="width:82px" %)Frequency Band|(% style="width:85px" %)Sub-band|(% style="width:46px" %)BAT
196 + image 9 modify text content of label widget
181 181  
182 -[[image:image-20240507152130-12.png||height="469" width="1366"]](% style="display:none" %)
198 +**4. Add image into project**
183 183  
184 -Example Payload (FPort=5):  [[image:image-20240507152254-13.png||height="26" width="130"]]
200 +To use the image widget, you should first add an image to your project. The image format must be PNG, and its resolution should not exceed 800x480 pixels. There are two ways to add an image file. One way is to move your image into the folder "…/squareline project/assets/", as shown in image 10. The other way is to click the "ADD FILE INTO ASSETS" button, then select an image from your computer to import. After adding, you can see the image in the "assets" area in SquareLine Studio, as demonstrated in image 11.
185 185  
202 +[[image:image-20240928113424-9.png||height="355" width="505"]]
186 186  
187 -(% style="color:#4472c4" %)**Sensor Model**(%%): For PB01, this value is 0x35.
204 + image 10 add image file into SquareLine Studio project
188 188  
189 -(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.
206 +[[image:image-20240928114139-10.png||height="559" width="810"]]
190 190  
191 -(% style="color:#4472c4" %)**Frequency Band**:
208 + image 11 use image widget in SquareLine Studio
192 192  
193 -*0x01: EU868
210 +**5. The relationship between widgets**
194 194  
195 -*0x02: US915
212 +There are two common relationships between widgets: one is parallel, the other is parent-child. The parallel relationship means that widgets' relative position is based on a collective object of reference. In parent-child relationship, the parts of the child object that are outside the boundaries of the parent object are not visible by default. Therefore, we need to adjust the position of the child object so that it falls within the range of the parent object, allowing it to be seen as illustrated in image 13.
196 196  
197 -*0x03: IN865
214 +[[image:1727486567182-334.png||height="318" width="278"]]
198 198  
199 -*0x04: AU915
216 +image 12 move label1 to make label1 widget be a child of button1 widget(1)
200 200  
201 -*0x05: KZ865
218 +[[image:image-20240928112001-8.png||height="431" width="796"]]
202 202  
203 -*0x06: RU864
220 + image 13 move label1 to make label1 widget be a child of button1 widget(2)
204 204  
205 -*0x07: AS923
222 +**6. Preview the final effect**
206 206  
207 -*0x08: AS923-1
224 +An advantage of this kind of software is that you can edit the UI with quick previews. In other words, it provides a way of combining graphical programming with simulation immediately.
208 208  
209 -*0x09: AS923-2
226 +[[image:1727487368023-281.png]]
210 210  
211 -*0x0a: AS923-3
228 + image 14 click on the triangle icon to start or end the simulation
212 212  
230 +For more detailed usage, please visit the official link: [[SquareLine Studio 1.4.2 Documentation ~| SquareLine Studio>>url:https://docs.squareline.io/docs/squareline/]].
213 213  
214 -(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
215 215  
216 -(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for PB01.
233 +== 2.4 Integrate UI Code to ESP-IDF Project ==
217 217  
218 -(% style="color:#4472c4" %)**Ex1**(%%): 0x0C DE = 3294mV
219 219  
236 +To achieve the integrating, we first need to export the UI code, then make some modifications, and finally relocate the UI code to a specific position within the project.
220 220  
221 -=== 2.4.2  Uplink FPORT~=2, Real time sensor value ===
238 +[[image:1727229798126-306.png]]
222 222  
240 + image 15 export UI file
223 223  
224 -PB01 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].
242 +[[image:1727229821582-258.png||height="333" width="662"]]
225 225  
226 -Uplink uses FPORT=2 and every 20 minutes send one uplink by default.
244 + image 16 exported UI file
227 227  
228 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460px" %)
229 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
230 -**Size(bytes)**
231 -)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)2|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
232 -**1**
233 -)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
234 -**1**
235 -)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)(((
236 -**2**
237 -)))|=(% style="width: 40px;background-color:#4F81BD;color:white" %)(((
238 -**2**
239 -)))
240 -|(% style="width:97px" %)(((
241 -Value
242 -)))|(% style="width:39px" %)Battery|(% style="width:39px" %)(((
243 -Sound_ACK
246 +Create a empty directory entitled "ui" in path "basic_prj/app_components/ui/", and then copy all UI code exported to this directory.
244 244  
245 -&Sound_key
246 -)))|(% style="width:100px" %)(((
247 -(((
248 -Alarm
249 -)))
250 -)))|(% style="width:77px" %)(((
251 -(((
252 -Temperature
253 -)))
254 -)))|(% style="width:47px" %)(((
255 -Humidity
256 -)))
248 +[[image:image-20240928144830-11.png]]
257 257  
258 -Example in TTN.
250 + image 17 open CMakeLists.txt
259 259  
260 -[[image:image-20240507150155-11.png||height="549" width="1261"]]
252 +[[image:1727229892636-154.png||height="521" width="407"]]
261 261  
262 -Example Payload (FPort=2):  (% style="background-color:yellow" %)**0C EA 03 01 01 11 02 A8**
254 + image 18 modify CMakeLists.txt
263 263  
264 -==== (% style="color:blue" %)**Battery:**(%%) ====
256 +The last step of integrating is adding two lines of code in main.c file.
265 265  
266 -Check the battery voltage.
258 +[[image:1727229926561-300.png]]
267 267  
268 -* Ex1: 0x0CEA = 3306mV
269 -* Ex2: 0x0D08 = 3336mV
260 + image 19 add "ui.h"
270 270  
271 -==== (% style="color:blue" %)**Sound_ACK & Sound_key:**(%%) ====
262 +[[image:1727229955611-607.png]]
272 272  
273 -Key sound and ACK sound are enabled by default.
264 + image 20 add "ui_init()"
274 274  
275 -* Example1: 0x03
276 276  
277 - Sound_ACK: (03>>1) & 0x01=1, OPEN.
267 +== 2.5 Brief introduction of hello world project ==
278 278  
279 -**~ ** Sound_key:  03 & 0x01=1, OPEN.
280 280  
281 -* Example2: 0x01
270 +The project consists of two screens. The first screen displays the company's logo, the project name, and a button to navigate to the next screen. The second screen presents some information about this HMI screen product through an image and includes a button to return to the previous screen.
282 282  
283 - Sound_ACK: (01>>1) & 0x01=0, CLOSE.
284 284  
285 -**~ ** Sound_key:  01 & 0x01=1, OPEN.
273 +== 2.6 Test Result ==
286 286  
287 287  
288 -==== (% style="color:blue" %)**Alarm:**(%%) ====
276 +By pressing the button lying bottom right, the screen can switch to another as expected. This indicates that the UI file has been successfully integrated into the project and is now effective.
289 289  
290 -Key alarm.
278 +[[image:1727488067077-684.png||height="402" width="574"]]
291 291  
292 -* Ex1: 0x01 & 0x01=1, TRUE.
293 -* Ex2: 0x00 & 0x01=0, FALSE.
280 + image 21 screen1
294 294  
295 -==== (% style="color:blue" %)**Temperature:**(%%) ====
282 +[[image:1727488157579-949.png||height="397" width="572"]]
296 296  
297 -* Example1:  0x0111/10=27.3℃
298 -* Example2:  (0xFF0D-65536)/10=-24.3℃
284 + image 22 screen2
299 299  
300 -If payload is: FF0D :  (FF0D & 8000 == 1) , temp = (FF0D - 65536)/100 =-24.3℃
301 301  
302 -（FF0D & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
287 += 3. Example Project 1: LoRa Central Display =
303 303  
289 +[[image:image-20240916101737-1.png||height="468" width="683"]]
304 304  
305 -==== (% style="color:blue" %)**Humidity:**(%%) ====
306 306  
307 -* Humidity:    0x02A8/10=68.0%
292 += 4. Example Project 2: LoRaWAN RS485 Alarm =
308 308  
309 -=== 2.4.3  Uplink FPORT~=3, Datalog sensor value ===
294 +(% class="wikigeneratedid" %)
295 += 5.  The way to add a new panel to project =
310 310  
297 +~1. Design a panel in SquareLine Studio, using image 5.1 below as a reference.
311 311  
312 -PB01 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.
299 +[[image:image-20241121113445-1.png||height="584" width="934"]]
313 313  
314 -[[image:image-20240510144912-1.png||height="471" width="1178"]](% style="display:none" %)
301 + image 5.1 a panel about water_leak
315 315  
303 +2. Export the ui file. You need  to adjust the export path first, then click "Export->Export UI Files". This step had been introduced before. Then you can get the ui files as shown in image 5.2.
316 316  
317 -* Each data entry is 11 bytes, to save airtime and battery, PB01 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)
305 +[[image:image-20241121141120-4.png||height="383" width="795"]]
318 318  
319 -For example, in US915 band, the max payload for different DR is:
307 + image 5.2 ui files exported
320 320  
321 -1. **DR0**: max is 11 bytes so one entry of data
322 -1. **DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
323 -1. **DR2**: total payload includes 11 entries of data
324 -1. **DR3**: total payload includes 22 entries of data.
309 +3. Delete or rename some file. Here are the steps:
325 325  
326 -(% style="color:red" %)**Notice: PB01 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**
311 + 3.1 Delete the 'components' directory.
312 + 3.2 Delete 'filelist.txt'.
313 + 3.3 Delete 'ui_helpers.c' and 'ui_helpers.h'.
314 + 3.4 Rename 'ui_ScreenMain.c' in the 'screens' directory to 'ui_water_leak_style.c'.
315 + 3.5 Rename the 'screens' directory to 'styles'.
327 327  
328 -See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].
317 +[[image:image-20241121151934-10.png||height="303" width="792"]]
329 329  
330 -(% style="display:none" %) (%%)
319 + image 5.3 rest file 1
331 331  
332 -=== 2.4.4  Decoder in TTN V3 ===
321 +[[image:image-20241121142925-7.png||height="141" width="793"]]
333 333  
323 + image 5.4 rest file 2
334 334  
335 -In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.
325 +4. Open this project in vscode.
336 336  
337 -In TTN , add formatter as below:
327 +5. Add file include path about water_leak in extra_lib/CMakeLists.txt as shown in image 5.5, 5.6, and its format is similar to the tem_hum or door.
338 338  
339 -[[image:image-20240507162814-16.png||height="778" width="1135"]]
329 +[[image:image-20241121181957-17.png||height="438" width="516"]]
340 340  
341 -(((
342 -Please check the decoder from this link:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
343 -)))
331 + image 5.5 before add
344 344  
345 -(((
346 -
347 -)))
333 +[[image:image-20241121182239-18.png||height="520" width="518"]]
348 348  
349 -== 2.5 Show data on Datacake ==
335 + image 5.6 after add
350 350  
337 +6. Modify header file include in fonts and images directory. Open the fonts/ui_font_Font12.c file, as shown in image 5.7, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.8 is the modified image. Other font file need to be modified in same way.
351 351  
352 -(((
353 -Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
354 -)))
339 +[[image:image-20241121171629-11.png]]
355 355  
356 -(((
357 -
358 -)))
341 + image 5.7 before-modified font file
359 359  
360 -(((
361 -(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the LoRaWAN network.
362 -)))
343 +[[image:image-20241121171901-12.png]]
363 363  
364 -(((
365 -(% style="color:blue" %)**Step 2**(%%):  Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
366 -)))
345 + image 5.8 modified font file
367 367  
368 -(((
369 -~1. Add Datacake:
370 -)))
347 +Open the images/ui_img_battery_empty_png.c file, as shown in image 5.9, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.10 is the modified image. Other image file need to be modified in same way.
371 371  
372 -(((
373 -2. Select default key as Access Key:
374 -)))
349 +[[image:image-20241121172714-13.png]]
375 375  
376 -(((
377 -3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add PB01:
378 -)))
351 + image 5.9 before-modified image file
379 379  
380 -(((
381 - Please refer to the figure below.
382 -)))
353 +[[image:image-20241121172908-14.png]]
383 383  
384 -[[image:image-20240510150924-2.png||height="612" width="1186"]]
355 + image 5.10 modified image file
385 385  
357 +7. Modify the ui_water_leak/CMakeLists.txt. Open this file, and modify it from image 5.11 to image 5.12.
386 386  
387 -Log in to DATACAKE, copy the API under the account.
359 +[[image:image-20241121180030-15.png]]
388 388  
389 -[[image:image-20240510151944-3.png||height="581" width="1191"]]
361 + image 5.11 before modification
390 390  
363 +[[image:image-20241121180517-16.png]]
391 391  
365 + image 5.12 after modification
392 392  
393 -[[image:image-20240510152150-4.png||height="697" width="1188"]]
367 +8.
394 394  
395 395  
396 -[[image:image-20240510152300-5.png||height="298" width="1191"]]
397 397  
398 398  
399 -[[image:image-20240510152355-6.png||height="782" width="1193"]]
400 400  
401 -[[image:image-20240510152542-8.png||height="545" width="739"]]
402 402  
403 -[[image:image-20240510152634-9.png||height="748" width="740"]]
404 404  
405 405  
406 -[[image:image-20240510152809-10.png||height="607" width="732"]]
407 407  
408 -[[image:image-20240510153934-14.png||height="460" width="1199"]]
409 409  
410 410  
411 -[[image:image-20240510153435-12.png||height="428" width="1197"]]
412 -
413 -
414 -Copy and paste the [[TTN decoder>>https://github.com/dragino/dragino-end-node-decoder]] here and save.
415 -
416 -[[image:image-20240510153624-13.png||height="468" width="1195"]]
417 -
418 -
419 -Visual widgets please read the DATACAKE documentation.
420 -
421 -(% style="display:none" %) (%%)
422 -
423 -== 2.6  Datalog Feature ==
424 -
425 -
426 -(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
427 -When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.
428 -
429 -
430 -=== 2.6.1  Unix TimeStamp ===
431 -
432 -
433 -Unix TimeStamp shows the sampling time of uplink payload. format base on
434 -
435 -[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
436 -
437 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
438 -
439 -For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)
440 -
441 -
442 -[[image:1655782409139-256.png]]
443 -
444 -
445 -=== 2.6.2  Poll sensor value ===
446 -
447 -
448 -(((
449 -User can poll sensor value based on timestamps from the server. Below is the downlink command.
450 -)))
451 -
452 -(((
453 -Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
454 -)))
455 -
456 -(((
457 -For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)
458 -)))
459 -
460 -(((
461 -Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data
462 -)))
463 -
464 -(((
465 -Uplink Internal =5s，means PB01 will send one packet every 5s. range 5~~255s.
466 -)))
467 -
468 -
469 -=== 2.6.3  Datalog Uplink payload ===
470 -
471 -
472 -See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]
473 -
474 -(% style="display:none" %) (%%) (% style="display:none" %)
475 -
476 -== 2.7 Button ==
477 -
478 -
479 -* ACT button
480 -
481 -Long press this button PB01 will reset and join network again.
482 -
483 -[[image:image-20240510161626-17.png||height="192" width="224"]]
484 -
485 -* Alarm button
486 -
487 -Press the button PB01 will immediately uplink data, and alarm is "TRUE".
488 -
489 -[[image:image-20240705095149-5.png||height="164" width="162"]](% style="display:none" %)
490 -
491 -
492 -== 2.8 LED Indicator ==
493 -
494 -
495 -(((
496 -The PB01 has a triple color LED which for easy showing different stage.
497 -)))
498 -
499 -Hold the ACT green light to rest, then the green flashing node restarts, the blue flashing once upon request for network access, and the green constant light for 5 seconds after successful network access
500 -
501 -(((
502 -(% style="color:#037691" %)**In a normal working state**:
503 -)))
504 -
505 -* When the node is restarted, hold the ACT (% style="color:green" %)**GREEN**(%%) lights up , then the (% style="color:green" %)**GREEN**(%%) flashing node restarts.The (% style="color:blue" %)**BLUE**(%%) flashing once upon request for network access, and the (% style="color:green" %)**GREEN**(%%) constant light for 5 seconds after successful network access(% style="color:#0000ff" %)**.**
506 -* During OTAA Join:
507 -** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.
508 -** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.
509 -* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.
510 -* Press the alarm button，The (% style="color:red" %)**RED**(%%) flashes until the node receives the ACK from the platform and the (% style="color:blue" %)**BLUE**(%%) light stays 5s.
511 -
512 -(((
513 -
514 -)))
515 -
516 -== 2.9 Buzzer ==
517 -
518 -
519 -The PB01 has** button sound** and** ACK sound** and users can turn on or off both sounds by using [[AT+SOUND>>||anchor="H3.3A0Setbuttonsoundandbuttonalarm"]].
520 -
521 -* (% style="color:#4f81bd" %)**Button sound**(%%)** **is the music produced by the node after the alarm button is pressed.
522 -
523 - Users can use[[ AT+OPTION>>||anchor="H3.4A0Setbuzzermusic2807E429"]] to set different button sounds.
524 -
525 -* (% style="color:#4f81bd" %)**ACK sound **(%%)is the notification tone that the node receives ACK.
526 -
527 -= 3.  Configure PB01 via AT command or LoRaWAN downlink =
528 -
529 -
530 -Users can configure PB01 via AT Command or LoRaWAN Downlink.
531 -
532 -* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
533 -
534 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
535 -
536 -There are two kinds of commands to configure PB01, they are:
537 -
538 -* (% style="color:#4f81bd" %)**General Commands:**
539 -
540 -These commands are to configure:
541 -
542 -* General system settings like: uplink interval.
543 -
544 -* LoRaWAN protocol & radio-related commands.
545 -
546 -They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
547 -
548 -
549 -* (% style="color:#4f81bd" %)**Commands special design for PB01**
550 -
551 -These commands are only valid for PB01, as below:
552 -
553 -(% style="display:none" %) (%%)
554 -
555 -== 3.1  Downlink Command Set ==
556 -
557 -
558 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
559 -|=(% style="width: 130px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 151px; background-color: rgb(79, 129, 189); color: white;" %)**Function**|=(% style="width: 92px; background-color: rgb(79, 129, 189); color: white;" %)**Response**|=(% style="width: 206px; background-color: rgb(79, 129, 189); color: white;" %)**Downlink**
560 -|(% style="width:130px" %)AT+TDC=?|(% style="width:151px" %)(((
561 -
562 -
563 -View current TDC time
564 -)))|(% style="width:92px" %)(((
565 -1200000
566 -OK
567 -)))|(% style="width:206px" %)Default 1200000(ms)
568 -|(% style="width:130px" %)AT+TDC=300000|(% style="width:151px" %)Set TDC time|(% style="width:92px" %)OK|(% style="width:206px" %)(((
569 -(((
570 -0X0100012C:
571 -01: fixed command
572 -00012C: 0X00012C=
573 -
574 -300(seconds)
575 -)))
576 -
577 -(((
578 -
579 -)))
580 -)))
581 -|(% style="width:130px" %)ATZ|(% style="width:151px" %)Reset node|(% style="width:92px" %) |(% style="width:206px" %)0x04FF
582 -|(% style="width:130px" %)AT+FDR|(% style="width:151px" %)Restore factory settings|(% style="width:92px" %) |(% style="width:206px" %)0X04FE
583 -|(% style="width:130px" %)AT+CFM=?|(% style="width:151px" %)View the current confirmation mode status|(% style="width:92px" %)(((
584 -0,7,0
585 -
586 -OK
587 -)))|(% style="width:206px" %)Default 0,7,0
588 -|(% style="width:130px" %)AT+CFM=1,7,1|(% style="width:151px" %)(((
589 -Confirmed uplink mode, the maximum number of retries is seven, and uplink fcnt increase by 1 for each retry
590 -)))|(% style="width:92px" %)(((
591 -OK
592 -)))|(% style="width:206px" %)(((
593 -05010701
594 -
595 -05: fixed command
596 -
597 -01:confirmed uplink
598 -
599 -07: retry 7 times
600 -
601 -01: fcnt count plus 1
602 -)))
603 -|(% style="width:130px" %)AT+NJM=?|(% style="width:151px" %)(((
604 -Check the current network connection method
605 -)))|(% style="width:92px" %)(((
606 -1
607 -OK
608 -)))|(% style="width:206px" %)Default 1
609 -|(% style="width:130px" %)AT+NJM=0|(% style="width:151px" %)Change the network connection method to ABP|(% style="width:92px" %)(((
610 -Attention:Take effect after ATZ
611 -OK
612 -)))|(% style="width:206px" %)(((
613 -0X2000: ABP
614 -0x2001: OTAA
615 -20: fixed command
616 -)))
617 -|(% style="width:130px" %)AT+RPL=?|(% style="width:151px" %)View current RPL settings|(% style="width:92px" %)(((
618 -0
619 -OK
620 -)))|(% style="width:206px" %)Default 0
621 -|(% style="width:130px" %)AT+RPL=1|(% style="width:151px" %)set RPL=1    |(% style="width:92px" %)OK|(% style="width:206px" %)(((
622 -0x2101:
623 -21: fixed command
624 -01: for details, check wiki
625 -)))
626 -|(% style="width:130px" %)AT+ADR=?|(% style="width:151px" %)View current ADR status|(% style="width:92px" %)(((
627 -1
628 -OK
629 -)))|(% style="width:206px" %)Default 0
630 -|(% style="width:130px" %)AT+ADR=0|(% style="width:151px" %)Set the ADR state to off|(% style="width:92px" %)OK|(% style="width:206px" %)(((
631 -0x2200: close
632 -0x2201: open
633 -22: fixed command
634 -)))
635 -|(% style="width:130px" %)AT+DR=?|(% style="width:151px" %)View the current DR settings|(% style="width:92px" %)OK|(% style="width:206px" %)
636 -|(% style="width:130px" %)AT+DR=1|(% style="width:151px" %)(((
637 -set DR to 1
638 -It takes effect only when ADR=0
639 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
640 -0X22000101:
641 -00: ADR=0
642 -01: DR=1
643 -01: TXP=1
644 -22: fixed command
645 -)))
646 -|(% style="width:130px" %)AT+TXP=?|(% style="width:151px" %)View the current TXP|(% style="width:92px" %)OK|(% style="width:206px" %)
647 -|(% style="width:130px" %)AT+TXP=1|(% style="width:151px" %)(((
648 -set TXP to 1
649 -It takes effect only when ADR=0
650 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
651 -0X22000101:
652 -00: ADR=0
653 -01: DR=1
654 -01: TXP=1
655 -22: fixed command
656 -)))
657 -|(% style="width:130px" %)AT+RJTDC=10|(% style="width:151px" %)Set RJTDC time interval|(% style="width:92px" %)OK|(% style="width:206px" %)(((
658 -0X26000A:
659 -26: fixed command
660 -000A: 0X000A=10(min)
661 -for details, check wiki
662 -)))
663 -|(% style="width:130px" %) |(% style="width:151px" %)(((
664 -(((
665 -~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
666 -
667 -Retrieve stored data for a specified period of time
668 -)))
669 -
670 -(((
671 -
672 -)))
673 -)))|(% style="width:92px" %) |(% style="width:206px" %)(((
674 -0X3161DE7C7061DE8A800A:
675 -31: fixed command
676 -61DE7C70:0X61DE7C70=2022/1/12 15:00:00
677 -61DE8A80:0X61DE8A80=2022/1/12 16:00:00
678 -0A: 0X0A=10(second)
679 -View details 2.6.2
680 -)))
681 -|(% style="width:130px" %)AT+DDETECT=?|(% style="width:151px" %)View the current DDETECT setting status and time|(% style="width:92px" %)(((
682 -1,1440,2880
683 -OK
684 -)))|(% style="width:206px" %)Default 1,1440,2880(min)
685 -|(% style="width:130px" %)AT+DDETECT=(((
686 -1,1440,2880
687 -)))|(% style="width:151px" %)(((
688 -Set DDETECT setting status and time
689 -((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))
690 -)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
691 -0X320005A0: close
692 -0X320105A0: open
693 -32: fixed command
694 -05A0: 0X05A0=1440(min)
695 -)))
696 -
697 -== 3.2  Set Password ==
698 -
699 -
700 -Feature: Set device password, max 9 digits.
701 -
702 -(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
703 -
704 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
705 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
706 -|(% style="width:155px" %)AT+PWORD=?|(% style="width:124px" %)Show password|(% style="width:86px" %)(((
707 -123456
708 -OK
709 -)))
710 -|(% style="width:155px" %)AT+PWORD=999999|(% style="width:124px" %)Set password|(% style="width:86px" %)OK
711 -
712 -(% style="color:#4f81bd" %)**Downlink Command:**
713 -
714 -No downlink command for this feature.
715 -
716 -
717 -== 3.3  Set button sound and ACK sound ==
718 -
719 -
720 -Feature: Turn on/off button sound and ACK alarm.
721 -
722 -(% style="color:#4f81bd" %)**AT Command: AT+SOUND**
723 -
724 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
725 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
726 -|(% style="width:155px" %)(((
727 -AT+SOUND=?
728 -)))|(% style="width:124px" %)Get the current status of button sound and ACK sound|(% style="width:86px" %)(((
729 -1,1
730 -OK
731 -)))
732 -|(% style="width:155px" %)(((
733 -AT+SOUND=0,1
734 -)))|(% style="width:124px" %)Turn off the button sound and turn on ACK sound|(% style="width:86px" %)OK
735 -
736 -(% style="color:#4f81bd" %)**Downlink Command: 0xA1 **
737 -
738 -Format: Command Code (0xA1) followed by 2 bytes mode value.
739 -
740 -The first byte after 0XA1 sets the button sound, and the second byte after 0XA1 sets the ACK sound.** (0: off, 1: on)**
741 -
742 -* **Example: **Downlink Payload: A10001  ~/~/ Set AT+SOUND=0,1  Turn off the button sound and turn on ACK sound.
743 -
744 -
745 -== 3.4  Set buzzer music type(0~~4) ==
746 -
747 -
748 -Feature: Set different alarm key response sounds.There are five different types of button music.
749 -
750 -(% style="color:#4f81bd" %)**AT Command: AT+OPTION**
751 -
752 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
753 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
754 -|(% style="width:155px" %)(((
755 -AT+OPTION=?
756 -)))|(% style="width:124px" %)(((
757 -Get the buzzer music type
758 -)))|(% style="width:86px" %)(((
759 -3
760 -
761 -OK
762 -)))
763 -|(% style="width:155px" %)AT+OPTION=1|(% style="width:124px" %)Set the buzzer music to type 1|(% style="width:86px" %)OK
764 -
765 -(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
766 -
767 -Format: Command Code (0xA3) followed by 1 byte mode value.
768 -
769 -* **Example: **Downlink Payload: A300  ~/~/ Set AT+OPTION=0  Set the buzzer music to type 0.
770 -
771 -== 3.5  Set Valid Push Time ==
772 -
773 -
774 -Feature: Set the holding time for pressing the alarm button to avoid miscontact. Values range from** 0 ~~1000ms**.
775 -
776 -(% style="color:#4f81bd" %)**AT Command: AT+STIME**
777 -
778 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
779 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
780 -|(% style="width:155px" %)(((
781 -AT+STIME=?
782 -)))|(% style="width:124px" %)(((
783 -Get the button sound time
784 -)))|(% style="width:86px" %)(((
785 -0
786 -OK
787 -)))
788 -|(% style="width:155px" %)(((
789 -AT+STIME=1000
790 -)))|(% style="width:124px" %)Set the button sound time to 1000**ms**|(% style="width:86px" %)OK
791 -
792 -(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
793 -
794 -Format: Command Code (0xA2) followed by 2 bytes mode value.
795 -
796 -* **Example: **Downlink Payload: A203E8  ~/~/ Set AT+STIME=1000  
797 -
798 -**~ Explain: **Hold the alarm button for 10 seconds before the node will send the alarm packet.
799 -
800 -
801 -
802 -= 4.  Battery & How to replace =
803 -
804 -== 4.1  Battery Type and replace ==
805 -
806 -
807 -PB01 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). Users can buy generic AAA battery and replace it.
808 -
809 -(% style="color:red" %)**Note: **
810 -
811 -1.  The PB01 doesn't have any screw, users can use nail to open it by the middle.
812 -
813 -[[image:image-20220621143535-5.png]]
814 -
815 -
816 -2.  Make sure the direction is correct when install the AAA batteries.
817 -
818 -[[image:image-20220621143535-6.png]]
819 -
820 -
821 -== 4.2  Power Consumption Analyze ==
822 -
823 -
824 -Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
825 -
826 -Instruction to use as below:
827 -
828 -(% style="color:blue" %)**Step 1**(%%):  Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
829 -
830 -[[battery calculator>>https://www.dropbox.com/sh/sxrgszkac4ips0q/AAA4XjBI3HAHNpdbU3ALN1j0a/Battery%20Document/Battery_Analyze?dl=0&subfolder_nav_tracking=1]]
831 -
832 -
833 -(% style="color:blue" %)**Step 2**(%%):  (% style="display:none" %) (%%)Open it and choose
834 -
835 -* Product Model
836 -* Uplink Interval
837 -* Working Mode
838 -
839 -And the Life expectation in difference case will be shown on the right.
840 -
841 -[[image:image-20220621143643-7.png||height="429" width="1326"]]
842 -
843 -
844 -= 5.  Accessories =
845 -
846 -
847 -* (((
848 -(% class="wikigeneratedid" id="H5.2A0ProgramConverter28AS-0229" %)
849 -**Program Converter (AS-02)**
850 -)))
851 -
852 -AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:
853 -
854 -1. Access AT console of PB01 when used with USB-TTL adapter. [[See this link>>||anchor="H6.1HowtouseATCommandtoconfigurePB01"]].
855 -
856 -[[image:image-20220621141724-3.png]]
857 -
858 -
859 859  = 6. FAQ =
860 860  
861 -== 6.1 How to use AT Command to configure PB01 ==
381 +== 6.1 ==
862 862  
863 863  
864 -PB01 supports AT Command set. Users can use a USB to TTL adapter plus the Program Cable to connect to PB01 for using AT command, as below.
865 -
866 -[[image:image-20240511085914-1.png||height="570" width="602"]]
867 -
868 -
869 -**Connection:**
870 -
871 -* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin
872 -* (% style="background-color:yellow" %)USB to TTL RXD  <~-~-> Program Converter D+ pin
873 -* (% style="background-color:yellow" %)USB to TTL TXD  <~-~-> Program Converter A11 pin
874 -
875 -(((
876 -In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for PB01. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.
877 -)))
878 -
879 -(((
880 -Input password and ATZ to activate PB01, as shown below:
881 -)))
882 -
883 -[[image:image-20240510174509-18.png||height="572" width="791"]]
884 -
885 -
886 -== 6.2  AT Command and Downlink ==
887 -
888 -
889 -(((
890 -Sending ATZ will reboot the node
891 -)))
892 -
893 -(((
894 -Sending AT+FDR will restore the node to factory settings
895 -)))
896 -
897 -(((
898 -Get the node's AT command setting by sending AT+CFG
899 -)))
900 -
901 -(((
902 -
903 -)))
904 -
905 -(((
906 -**Example：**                                           
907 -)))
908 -
909 -(((
910 -AT+DEUI=FA 23 45 55 55 55 55 51
911 -
912 -AT+APPEUI=FF AA 23 45 42 42 41 11
913 -
914 -AT+APPKEY=AC D7 35 81 63 3C B6 05 F5 69 44 99 C1 12 BA 95
915 -
916 -AT+DADDR=FFFFFFFF
917 -
918 -AT+APPSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
919 -
920 -AT+NWKSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
921 -
922 -AT+ADR=1
923 -
924 -AT+TXP=7
925 -
926 -AT+DR=5
927 -
928 -AT+DCS=0
929 -
930 -AT+PNM=1
931 -
932 -AT+RX2FQ=869525000
933 -
934 -AT+RX2DR=0
935 -
936 -AT+RX1DL=5000
937 -
938 -AT+RX2DL=6000
939 -
940 -AT+JN1DL=5000
941 -
942 -AT+JN2DL=6000
943 -
944 -AT+NJM=1
945 -
946 -AT+NWKID=00 00 00 13
947 -
948 -AT+FCU=61
949 -
950 -AT+FCD=11
951 -
952 -AT+CLASS=A
953 -
954 -AT+NJS=1
955 -
956 -AT+RECVB=0:
957 -
958 -AT+RECV=
959 -
960 -AT+VER=EU868 v1.0.0
961 -
962 -AT+CFM=0,7,0
963 -
964 -AT+SNR=0
965 -
966 -AT+RSSI=0
967 -
968 -AT+TDC=1200000
969 -
970 -AT+PORT=2
971 -
972 -AT+PWORD=123456
973 -
974 -AT+CHS=0
975 -
976 -AT+RX1WTO=24
977 -
978 -AT+RX2WTO=6
979 -
980 -AT+DECRYPT=0
981 -
982 -AT+RJTDC=20
983 -
984 -AT+RPL=0
985 -
986 -AT+TIMESTAMP=systime= 2024/5/11 01:10:58 (1715389858)
987 -
988 -AT+LEAPSEC=18
989 -
990 -AT+SYNCMOD=1
991 -
992 -AT+SYNCTDC=10
993 -
994 -AT+SLEEP=0
995 -
996 -AT+ATDC=1
997 -
998 -AT+UUID=003C0C53013259E0
999 -
1000 -AT+DDETECT=1,1440,2880
1001 -
1002 -AT+SETMAXNBTRANS=1,0
1003 -
1004 -AT+DISFCNTCHECK=0
1005 -
1006 -AT+DISMACANS=0
1007 -
1008 -AT+PNACKMD=0
1009 -
1010 -AT+SOUND=0,0
1011 -
1012 -AT+STIME=0
1013 -
1014 -AT+OPTION=3
1015 -)))
1016 -
1017 -(((
1018 -**Example：**
1019 -)))
1020 -
1021 -[[image:image-20240511091518-2.png||height="601" width="836"]]
1022 -
1023 -
1024 -== 6.3  How to upgrade the firmware? ==
1025 -
1026 -
1027 -PB01 requires a program converter to upload images to PB01, which is used to upload image to PB01 for:
1028 -
1029 -* Support new features
1030 -* For bug fix
1031 -* Change LoRaWAN bands.
1032 -
1033 - PB01 internal program is divided into bootloader and work program, shipping is included bootloader, the user can choose to directly update the work program.
1034 -
1035 -If the bootloader is erased for some reason, users will need to download the boot program and the work program.
1036 -
1037 -
1038 -=== 6.3.1 Update firmware (Assume device have bootloader) ===
1039 -
1040 -
1041 -(% style="color:blue" %)**Step 1**(%%):** Connect UART as per FAQ 6.1**
1042 -
1043 -(% style="color:blue" %)**Step 2**(%%):** Update follow [[Instruction for update via DraginoSensorManagerUtility.exe>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]. **
1044 -
1045 -
1046 -=== 6.3.2 Update firmware (Assume device doesn't have bootloader) ===
1047 -
1048 -
1049 -Download both the boot program and the worker program** . **After update , device will have bootloader so can use above 6.3.1 method to update woke program.
1050 -
1051 -(% style="color:blue" %)**Step 1**(%%):** **Install [[TremoProgrammer>>url:https://www.dropbox.com/scl/fo/gk1rb5pnnjw4kv5m5cs0z/h?rlkey=906ouvgbvif721f9bj795vfrh&dl=0]]  first.
1052 -
1053 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220615170542-5.png?rev=1.1||alt="image-20220615170542-5.png"]]
1054 -
1055 -(% style="color:blue" %)**Step 2**(%%): Hardware Connection
1056 -
1057 -Connect PC and PB01 via USB-TTL adapter .
1058 -
1059 -(% style="color:red" %)**Note: To download firmware in this way, you need to pull the boot pin(Program Converter D- pin) high to enter the burn mode. After burning, disconnect the boot pin of the node and the 3V3 pin of the USB-TTL adapter, and reset the node to exit the burning mode.**
1060 -
1061 -**Connection:**
1062 -
1063 -* (% style="background-color:yellow" %)USB-TTL GND <~-~-> Program Converter GND pin
1064 -* (% style="background-color:yellow" %)USB-TTL RXD  <~-~-> Program Converter D+ pin
1065 -* (% style="background-color:yellow" %)USB-TTL TXD  <~-~-> Program Converter A11 pin
1066 -* (% style="background-color:yellow" %)USB-TTL 3V3 <~-~-> Program Converter D- pin
1067 -
1068 -(% style="color:blue" %)**Step 3**(%%):** **Select the device port to be connected, baud rate and bin file to be downloaded.
1069 -
1070 -[[image:image-20240701160913-1.png]]
1071 -
1072 -Users need to reset the node to start downloading the program.
1073 -~1. Reinstall the battery to reset the node
1074 -2. Hold down the ACT button to reset the node (see [[2.7>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/PB01--LoRaWAN_Button_User_Manual/#H2.7Button]] ).
1075 -
1076 -When this interface appears, it indicates that the download has been completed.
1077 -
1078 -[[image:image-20240701160924-2.png]]
1079 -
1080 -Finally, Disconnect Program Converter D- pin, reset the node again , and the node exits burning mode.
1081 -
1082 -
1083 -== 6.4  How to change the LoRa Frequency Bands/Region? ==
1084 -
1085 -
1086 -User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.
1087 -
1088 -
1089 -== 6.5 Why i see different working temperature for the device? ==
1090 -
1091 -
1092 -The working temperature range of device depends on the battery user choose.
1093 -
1094 -* Normal AAA Battery can support -10 ~~ 50°C working range.
1095 -* Special AAA battery can support -40 ~~ 60 °C working range. For example: [[Energizer L92>>https://data.energizer.com/pdfs/l92.pdf]]
1096 -
1097 1097  = 7. Order Info =
1098 1098  
1099 -== 7.1  Main Device ==
386 +== 7.1  Part Number ==
1100 1100  
1101 1101  
1102 -Part Number: (% style="color:#4472c4" %)PB01-LW-XX(%%) (white button) / (% style="color:#4472c4" %)PB01-LR-XX(%%)(Red Button)
389 +Part Number: (% style="color:#4472c4" %)LTS5
1103 1103  
1104 -(% style="color:#4472c4" %)**XX **(%%): The default frequency band
1105 1105  
1106 -* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band
1107 -* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band
1108 -* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band
1109 -* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band
1110 -* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band
1111 -* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band
1112 -* (% style="color:red" %)**IN865**(%%)**:  **LoRaWAN IN865 band
1113 -* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band
392 +== 7.2  Packing Info ==
1114 1114  
1115 -= 7. Packing Info =
1116 1116  
1117 -
1118 1118  **Package Includes**:
1119 1119  
1120 -* PB01 LoRaWAN Push Button x 1
397 +* LTS5 HMI Touch Screen
398 +* 5V,2A DC Power Adapter.
399 +* USB Type C Program Cable
1121 1121  
1122 1122  = 8. Support =
1123 1123  
... ... @@ -1128,7 +1128,9 @@
1128 1128  = 9.  Reference material =
1129 1129  
1130 1130  
1131 -* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/scl/fo/y7pvm58wcr8319d5o4ujr/APZtqlbzRCNbHoPWTmmMMWs?rlkey=wfh93x2dhcev3ydn0846rinf0&st=kdp6lg7t&dl=0]]
410 +* Datasheet
411 +* Source Code
412 +* Mechinical
1132 1132  
1133 1133  = 10. FCC Warning =
1134 1134  
1727229396732-319.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +197.2 KB
Content
1727229550717-684.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +113.9 KB
Content
1727229582471-566.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +73.6 KB
Content
1727229618724-758.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +118.7 KB
Content
1727229653254-680.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +116.2 KB
Content
1727229682537-381.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +51.5 KB
Content
1727229715361-392.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +75.2 KB
Content
1727229740592-843.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +87.3 KB
Content
1727229760857-521.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content
1727229798126-306.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +53.6 KB
Content
1727229821582-258.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +76.1 KB
Content
1727229845835-509.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +68.3 KB
Content
1727229892636-154.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +192.0 KB
Content
1727229926561-300.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +178.0 KB
Content
1727229955611-607.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +100.4 KB
Content
1727229990795-405.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +383.6 KB
Content
1727230012478-930.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +477.1 KB
Content
1727231038705-173.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +94.6 KB
Content
1727233636007-933.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +114.8 KB
Content
1727484665746-713.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +94.9 KB
Content
1727485118799-984.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +11.8 KB
Content
1727485251053-655.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
1727485480434-713.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +24.7 KB
Content
1727485933579-550.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +55.6 KB
Content
1727485953726-175.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +91.6 KB
Content
1727486567182-334.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
1727486578489-774.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +66.0 KB
Content
1727487368023-281.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +28.5 KB
Content
1727488067077-684.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +604.7 KB
Content
1727488099947-341.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
1727488108117-780.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
1727488157579-949.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +877.7 KB
Content
image-20240916101737-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +156.7 KB
Content
image-20240925110638-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +262.7 KB
Content
image-20240928090825-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +30.2 KB
Content
image-20240928103357-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +153.7 KB
Content
image-20240928103506-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +197.7 KB
Content
image-20240928105309-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +80.2 KB
Content
image-20240928110211-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +228.0 KB
Content
image-20240928111412-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +150.9 KB
Content
image-20240928111654-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +105.4 KB
Content
image-20240928112001-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +75.6 KB
Content
image-20240928113424-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +50.8 KB
Content
image-20240928114139-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +114.3 KB
Content
image-20240928144830-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +25.5 KB
Content
image-20241121113445-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +250.0 KB
Content
image-20241121120222-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +44.8 KB
Content
image-20241121120830-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +42.6 KB
Content
image-20241121141120-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +41.7 KB
Content
image-20241121141315-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
image-20241121141329-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +29.4 KB
Content
image-20241121142925-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +14.8 KB
Content
image-20241121145915-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +61.0 KB
Content
image-20241121150911-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +73.0 KB
Content
image-20241121151934-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +32.9 KB
Content
image-20241121171629-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +16.9 KB
Content
image-20241121171901-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +17.2 KB
Content
image-20241121172714-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +26.4 KB
Content
image-20241121172908-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +27.1 KB
Content
image-20241121180030-15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +27.7 KB
Content
image-20241121180517-16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +26.5 KB
Content
image-20241121181957-17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +59.3 KB
Content
image-20241121182239-18.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +71.3 KB
Content
image-20241122092239-19.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.xieby
Size
... ... @@ -1,0 +1,1 @@
1 +270.9 KB
Content