Skip to Content
Last modified by BoYang Xie on 2025/07/15 16:41
From version 181.1
edited by Dilisi S
on 2025/02/18 01:36
Change comment: Feb 17 edits - typo
To version 113.3
edited by BoYang Xie
on 2024/11/22 18:05
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.pradeeka
1 +XWiki.xieby
Content
... ... @@ -1,11 +3,12 @@
1 -
2 -
3 3  (% style="text-align:center" %)
4 -[[image:image-20241226135550-1.png]]
2 +[[image:image-20240915231842-1.png]]
5 5  
6 6  
7 7  
8 8  
7 +
8 +
9 +
9 9  (% _mstvisible="1" %)
10 10  (% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents:**
11 11  
... ... @@ -20,20 +20,20 @@
20 20  
21 21  = 1.  Introduction =
22 22  
23 -== 1.1  What is the LTS5 LoRa HMI Touch Screen? ==
24 +== 1.1  What is LTS5 LoRa HMI touch screen ==
24 24  
25 25  
26 -The LTS5 is a (% style="color:blue" %)**LoRa / LoRaWAN HMI Touch Screen**(%%) designed for displaying information in IoT projects. It features a **5.0-inch HMI touch screen** and supports **Wi-Fi**, **Bluetooth**, and **LoRa** wireless protocols.
27 +LTS5 is a (% style="color:blue" %)LoRa / LoRaWAN HMI Touch Screen(%%) designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.
27 27  
28 -The LTS5 is an open-source software project powered by an **ESP32 MCU** and a **Dragino LA66 LoRa** module. The extensive development resources available for ESP32 can significantly reduce development time.
29 +LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.
29 29  
30 -The LTS5's HMI touch screen supports **drag-and-drop** design, allowing developers to use SquareLine to easily customize the display UI for various applications.
31 +The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the display UI for different application.
31 31  
32 -The LA66 LoRa module can be programmed to support either private LoRa protocols or the LoRaWAN protocol.
33 +LTS5 use LA66 LoRa module, this module can be program to support private LoRa protocol or LoRaWAN protocol.
33 33  
35 +
34 34  == 1.2  Features ==
35 35  
36 -
37 37  * ESP32-WROOM MCU: 8MB RAM & 16MB ROM
38 38  * Dragino LA66 LoRa Module
39 39  * Support Private LoRa protocol or LoRaWAN protocol
... ... @@ -46,7 +46,7 @@
46 46  * 5V DC power
47 47  * IP Rating: IP52
48 48  
49 -== 1.3  Specifications ==
50 +== 1.3  Specification ==
50 50  
51 51  
52 52  **LoRa**:
... ... @@ -101,37 +101,28 @@
101 101  * Smart Cities
102 102  * Smart Factory
103 103  
104 -= 2.  Getting Started with 'Hello World' =
105 += 2.  Getting Started with Hello World =
105 105  
106 106  == 2.1  About this demo ==
107 107  
108 108  
109 -This getting started example demonstrates how to design and deploy a simple display UI for the LTS5 device. The example includes:
110 +In this Getting Started Example, we will show how to design a simple Display UI and upload it to LTS5. This UI has  a button , when user click the button. The Web UI will jump to a new page.
110 110  
111 -* Creating a basic UI with a single button.
112 -* Implementing functionality to navigate the Web UI to a new page when the button is clicked.
113 -* Uploading the UI to the LTS5 device.
114 114  
115 -By completing this demo, you will gain foundational knowledge for customizing the LTS5 interface and building more advanced IoT applications.
116 -
117 -
118 118  == 2.2  Install Software Running Environment ==
119 119  
115 +The ESP MCU can be developed using ESP-IDF, Arduino, or MicroPython. For this project, we utilize ESP-IDF for compilation and Visual Studio Code (VSCode) for editing.
120 120  
121 -The **ESP MCU** supports development with **ESP-IDF**, **Arduino**, or **MicroPython**. We use **ESP-IDF** for compilation and **Visual Studio Code (VS Code)** as the development environment for this project.
117 +=== 2.2.1 Install VSCode and ESP-IDF extension ===
122 122  
123 123  
124 -=== 2.2.1 Install VS Code and ESP-IDF extension ===
120 +Firstly, download and install VSCode for your computer's operating system from the official website: [[Download Visual Studio Code - Mac, Linux, Windows>>url:https://code.visualstudio.com/download]].
125 125  
122 +Next, you need to install the ESP-IDF extension within VSCode. The detailed operation steps are illustrated in image 1.
126 126  
127 -First, download and install **VS Code** for your operating system from the Visual Studio Code website: [[Visual Studio Code - Mac, Linux, Windows>>https://code.visualstudio.com/download]].
128 -
129 -Next, install the **ESP-IDF** extension within **VS Code**. Detailed steps for this process are shown in Image 1.
130 -
131 -
132 132  [[image:image-20240928110211-5.png||height="508" width="866"]]
133 133  
134 - Image 1: ESP-IDF extension install
126 + image 1 ESP-IDF extension install
135 135  
136 136  Links for reference: [[Install ESP32 ESP-IDF on Windows and Integrate with VS code (esp32tutorials.com)>>url:https://esp32tutorials.com/install-esp32-esp-idf-windows-integrate-vs-code/#:~~:text=In%20this%20tutorial,%20we%20will%20show%20you%20how%20to%20install]]
137 137  
... ... @@ -139,220 +139,159 @@
139 139  === 2.2.2 Install SquareLine Studio ===
140 140  
141 141  
142 -Download and install the latest version of [[SquareLine Studio>>https://squareline.io/downloads#lastRelease]] on your computer. It supports Windows, Linux, and Mac OS. The software version we are using here is 1.5.0. See the image below.
134 +The version we are utilizing for this software is 1.4.2. You can download it from the official link: [[SquareLine Studio - Download the current version of SquareLine Studio>>url:https://squareline.io/downloads#lastRelease]].
143 143  
144 -[[image:squareline.io_downloads.png||height="888" width="1294"]]
136 +Please note that this software necessitates the registration of a license prior to usage, and various licenses come with distinct limitations. For instance, the free version imposes restrictions such as a limit of 1 component, 150 widgets, and 10 screens. However, for first-time downloads, you are granted unrestricted access for a period of 30 days without the need for immediate registration.
145 145  
146 146  
147 -After installation, you can use SquareLine Studio with a **PERSONAL license plan**. Click **LOG IN** and create a free account using your email address. Then activate your PERSONAL license plan for free. You don’t need to provide any credit card information. However, the PERSONAL license plan has the following limitations:
139 +== 2.3 Simple usage of SquareLine Studio and export UI code ==
148 148  
149 -* Max. 10 screens
150 -* Max. 150 widgets
151 -* Max. 5 global colors
152 -* Max. 2 themes
153 -* Max. 1 component
154 154  
155 -== 2.3 Simple usage of SquareLine Studio and exporting UI code ==
142 +After launching and logging in to this software, create a project as shown in the following image 2. The version of LVGL is 8.3.11.
156 156  
144 +[[image:image-20240928103357-2.png||height="680" width="708"]]
157 157  
158 -Start the SquareLine Studio. The **launcher screen** appears as shown in the below image. You can create a new project by clicking **Create** in the top menu. Then select the **Desktop** tab. Select the development platform, **Eclipse with  SDL for development on PC**.
146 + image 2 create a SquareLine project
159 159  
160 -* In the **PROJECT SETTINGS**, select **LVGL version **as **8.3.11** and **Resolution** as **800** x **480**.
161 -* Select the **CREATE **button to create the new project with the selected settings.
148 +Next, we need to make some settings for this project. By clicking in the specified order on image 3, we can see the page as shown in image 4.
162 162  
163 -[[image:squareline-studio-launcher-screen.png||height="752" width="1415"]]
164 -
165 -
166 -Next, you need to configure some additional settings for this project. To do so, select** File  -> Project Settings** as shown in the image below.
167 -
168 168  [[image:1727229582471-566.png]]
169 169  
152 + image 3 project settings
170 170  
171 -In the **PROJECT SETTINGS** dialog box, configure/modify the project settings as shown in the image below.
172 -
173 -* **UI Files Export Path**: Select a **folder** on your computer to store the **UI files**.
174 -* **LVGL Include Path**: Set this to **lvgl.h**
175 -* Click on the **APPLY CHANGES** button.
176 -
177 177  [[image:image-20240928105309-4.png||height="526" width="556"]]
178 178  
156 + image 4 modify project settings
179 179  
180 -Now you can start building the user interface. Follow the steps below:
158 +Now we can start to use this software. Here are some usage information for this software.
181 181  
160 +**~1. add widget**
182 182  
183 -=== **Add widgets** ===
162 +To add a widget, you should click a widget you want to add at the area entitled “Widgets”. In image , demonstrate a add process of label, button, and image 5.
184 184  
185 -
186 -After creating a project, a **Screen** will be automatically added. Its name is **Screen1** by default.
187 -
188 -To add a widget, navigate to the **Widgets** panel, and then click on the widget you want to add to the screen. You can reposition the widgets in the screen area by clicking and dragging them. Now add a **Label**, **Button**, and **Image** as shown in the image below. The added widgets are also displayed in the **Hierarchy **panel.
189 -
190 190  [[image:image-20240928111412-6.png||height="526" width="864"]]
191 191  
166 + image 5 add widgets
192 192  
193 -Then click the **Screen **widget to add the second screen. After adding the second screen, it will appear in the Screens panel as **Screen2**.
168 +**2. modify widget**
194 194  
195 -[[image:Screenshot 2024-12-24 140459.png||height="278" width="290"]]
170 +The area for modifying widgets is called "Inspector". There are four parts in the "Inspector" tab. We use three of them more frequently, excluding "COMPONENT". The second part is aimed at adjusting the layout, size, position, alignment, flags, and states, etc. of widgets. The name of the second part indicates the type of widget it is representing, and in image 6, it is "BUTTON".
196 196  
197 -=== **Modify widget properties** ===
198 -
199 -
200 -The area for modifying widgets is called the **Inspector** panel. The Inspector panel consists of four sections: **COMPONENT**, **<WIDGET>**, **STYLE SETTINGS**, and **EVENTS**, as shown in the image below. The second section allows you to adjust a widget's layout, size, position, alignment, flags, states, and more. When you select a widget on the screen, the name of this section changes to match the name of the selected widget.
201 -
202 202  [[image:1727485118799-984.png]]
203 203  
174 + image 6 the button widget's "Inspector" tab
204 204  
205 -==== **Changing the Button properties** ====
176 +Second part: "Layout" means a auto position-management for widgets contained in the parent widget. "Transform" includes size, position and align modification.
206 206  
207 -
208 -Click the **Button **you have added to the screen. Under the **Layout** you can change the button's position and size. Use the following settings:
209 -
210 -* **Flex Flow**: No Layout
211 -* **Transform**:
212 -** **X**: 331 px
213 -** **Y**: 203 px
214 -** **Width**: 100 px
215 -** **Height**: 50 px
216 -** **Align**: CENTER
217 -
218 218  [[image:1727485251053-655.png]]
219 219  
180 +image 7 the button widget's "BUTTON" tab
220 220  
221 -Next, add a click event to the button. When the button is clicked, an event should trigger to change the current screen (Screen1) to a new screen (Screen2) with a fade effect and the transition from Screen1 to Screen2 should take 500ms.
182 +Third part: It is an area of style setting.
222 222  
223 -* Click **ADD EVENT** button. A new section will appear to configure this event.
184 +Fourth part: It is an area for adding events. In image 8, it is adding a click event to a button. If the button is clicked after the click event is added as shown in image 8, the current screen will fade into another specified screen, and the switching process will last 500ms.
224 224  
225 -[[image:Screenshot 2024-12-24 134937.png||height="80" width="290"]]
226 -
227 -* Select **CLICKED** from the dropdown under **Trigger**. Choose **CHANGE SCREEN** under **Action**, then click the **ADD** button. A new section will appear to configure the action.
228 -
229 -[[image:Screenshot 2024-12-24 134818.png||height="222" width="290"]]
230 -
231 -* Select **Screen2** under **Screen to**. Select **FADE ON** from **Fade mode**. The default value **500** means the transition takes 500 milliseconds to appear the Screen2.
232 -* Finally, click the **ADD** button.
233 -
234 234  [[image:1727485480434-713.png||height="395" width="290"]]
235 235  
236 - Image 8: Add an event for the button
188 + image 8 add event for button
237 237  
190 +**3. change label widget content**
238 238  
239 -==== **Changing the label properties** ====
192 +Modify the content in text as shown in image 9, the text content of label widget will be changed accordingly.
240 240  
241 -
242 -Click the Label you have added to the screen. Under the **Label** section, type "**Click for Detail**" in the **Text** textbox.
243 -
244 244  [[image:image-20240928090825-1.png||height="327" width="391"]]
245 245  
196 + image 9 modify text content of label widget
246 246  
247 -Once you enter the text, it will immediately appear on the label.
198 +**4. Add image into project**
248 248  
200 +To use the image widget, you should first add an image to your project. The image format must be PNG, and its resolution should not exceed 800x480 pixels. There are two ways to add an image file. One way is to move your image into the folder "…/squareline project/assets/", as shown in image 10. The other way is to click the "ADD FILE INTO ASSETS" button, then select an image from your computer to import. After adding, you can see the image in the "assets" area in SquareLine Studio, as demonstrated in image 11.
249 249  
250 -==== **Changing image properties** ====
251 -
252 -
253 -To use the **Image **widget, you should first add an image to your project. The image format must be PNG, and its resolution should not exceed 800x480 pixels. There are two ways to add an image file.
254 -
255 -One way is to move your image into the folder "…/squareline project/assets/", as shown in the image below.
256 -
257 257  [[image:image-20240928113424-9.png||height="355" width="505"]]
258 258  
204 + image 10 add image file into SquareLine Studio project
259 259  
260 -The other way is to click the "**ADD FILE INTO ASSETS**" button, then select an image from your computer to import. After adding, you can see the image in the "**assets**" panel in SquareLine Studio, as shown in the image below.
261 -
262 262  [[image:image-20240928114139-10.png||height="559" width="810"]]
263 263  
208 + image 11 use image widget in SquareLine Studio
264 264  
265 -==== **The relationship between widgets** ====
210 +**5. The relationship between widgets**
266 266  
212 +There are two common relationships between widgets: one is parallel, the other is parent-child. The parallel relationship means that widgets' relative position is based on a collective object of reference. In parent-child relationship, the parts of the child object that are outside the boundaries of the parent object are not visible by default. Therefore, we need to adjust the position of the child object so that it falls within the range of the parent object, allowing it to be seen as illustrated in image 13.
267 267  
268 -Widgets commonly have two types of relationships: **parallel** and **parent-child**.
269 -
270 -* In a **parallel relationship**, widgets' positions are determined relative to a shared reference object.
271 -* In a **parent-child relationship**, any part of the child object outside the parent's boundaries is hidden by default. To make the child object fully visible, you must adjust its position to fit within the parent's range.
272 -
273 273  [[image:1727486567182-334.png||height="318" width="278"]]
274 274  
216 +image 12 move label1 to make label1 widget be a child of button1 widget(1)
275 275  
276 -Move the label, **Label1** to make it a child of **Button1** as shown in the image below.
277 -
278 278  [[image:image-20240928112001-8.png||height="431" width="796"]]
279 279  
220 + image 13 move label1 to make label1 widget be a child of button1 widget(2)
280 280  
281 -Then set the **X** and **Y** position of the label to **0** as shown in the image below. The label will appear on the button. If you move the button on the screen, the label will move along with it as part of the button.
222 +**6. Preview the final effect**
282 282  
283 -[[image:Screenshot 2024-12-24 144005.png||height="360" width="290"]]
224 +An advantage of this kind of software is that you can edit the UI with quick previews. In other words, it provides a way of combining graphical programming with simulation immediately.
284 284  
285 -
286 -==== **Preview the screen** ====
287 -
288 -
289 -You can test the result by clicking on the **PLAY** button as shown in the image below. The screen will change into play mode.
290 -
291 291  [[image:1727487368023-281.png]]
292 292  
228 + image 14 click on the triangle icon to start or end the simulation
293 293  
294 -For more information, please visit the official link: [[SquareLine Studio 1.4.2 Documentation ~| SquareLine Studio>>url:https://docs.squareline.io/docs/squareline/]].
230 +For more detailed usage, please visit the official link: [[SquareLine Studio 1.4.2 Documentation ~| SquareLine Studio>>url:https://docs.squareline.io/docs/squareline/]].
295 295  
296 296  
297 -== 2.4 Integrate UI Code into an ESP-IDF Project ==
233 +== 2.4 Integrate UI Code to ESP-IDF Project ==
298 298  
299 299  
300 -To integrate, first export the UI code, then make some modifications, and finally relocate the UI code to a specific position within the project.
236 +To achieve the integrating, we first need to export the UI code, then make some modifications, and finally relocate the UI code to a specific position within the project.
301 301  
302 -On the  menubar, click **Export -> Export UI** Files as shown in the image below.
303 -
304 304  [[image:1727229798126-306.png]]
305 305  
240 + image 15 export UI file
306 306  
307 -The exported UI files can be found in your SquareLine project folder as shown in the image below.
308 -
309 -
310 310  [[image:1727229821582-258.png||height="333" width="662"]]
311 311  
244 + image 16 exported UI file
312 312  
313 -Create a new folder named "**ui**" at path "**basic_prj/app_components/ui/**", and copy all the exported UI code into it as shown in the image below.
246 +Create a empty directory entitled "ui" in path "basic_prj/app_components/ui/", and then copy all UI code exported to this directory.
314 314  
315 315  [[image:image-20240928144830-11.png]]
316 316  
250 + image 17 open CMakeLists.txt
317 317  
318 -Open the **CMakeLists.txt** file and edit it as ahown below.
319 -
320 320  [[image:1727229892636-154.png||height="521" width="407"]]
321 321  
254 + image 18 modify CMakeLists.txt
322 322  
323 -Open the main.c file and  add two lines of code as shown in the below images.
256 +The last step of integrating is adding two lines of code in main.c file.
324 324  
325 -Add **#include "ui.h"**
326 -
327 327  [[image:1727229926561-300.png]]
328 328  
260 + image 19 add "ui.h"
329 329  
330 -Add **ui_init();**
331 -
332 332  [[image:1727229955611-607.png]]
333 333  
264 + image 20 add "ui_init()"
334 334  
335 -== 2.5 Brief introduction to the Hello World project ==
336 336  
267 +== 2.5 Brief introduction of hello world project ==
337 337  
338 -The project consists of two screens. The first screen displays the company's logo, the project name, and a button to navigate to the next screen. The second screen provides information about the HMI screen product through an image and includes a button to return to the previous screen.
339 339  
270 +The project consists of two screens. The first screen displays the company's logo, the project name, and a button to navigate to the next screen. The second screen presents some information about this HMI screen product through an image and includes a button to return to the previous screen.
340 340  
272 +
341 341  == 2.6 Test Result ==
342 342  
343 343  
344 -By pressing the button located at the bottom right, the screen switches to the next one as expected. This confirms that the UI file has been successfully integrated into the project and is functioning correctly.
276 +By pressing the button lying bottom right, the screen can switch to another as expected. This indicates that the UI file has been successfully integrated into the project and is now effective.
345 345  
346 -Screen 1:
347 -
348 348  [[image:1727488067077-684.png||height="402" width="574"]]
349 349  
280 + image 21 screen1
350 350  
351 -Screen 2:
352 -
353 353  [[image:1727488157579-949.png||height="397" width="572"]]
354 354  
284 + image 22 screen2
355 355  
286 +
356 356  = 3. Example Project 1: LoRa Central Display =
357 357  
358 358  [[image:image-20240916101737-1.png||height="468" width="683"]]
... ... @@ -360,315 +360,135 @@
360 360  
361 361  = 4. Example Project 2: LoRaWAN RS485 Alarm =
362 362  
363 -= 5. Example Project 3: P2P =
294 += 5.  The way to add a new panel to project =
364 364  
365 -The project achieves the function of receiving LoRa P2P messages and displaying them on the screen. The workflow is as follows: A LA66, running a P2P program, sends a message in a particular format via an AT command. Then, the LTS5 receives the message and displays it on the screen.
296 +**~1. Design a panel in SquareLine Studio, using image 5.1 below as a reference.**
366 366  
367 -The project can be found at [[this link>>url:https://github.com/dragino/LoRa-HMI-Touch-Screen/tree/main/Example/P2P]].
368 -
369 -== 5.1 firmware flashing approach. ==
370 -
371 -5.1.1 Download this project
372 -
373 -5.1.2 Download esp32 firmware flash tool in [[this link>>https://docs.espressif.com/projects/esp-test-tools/en/latest/esp32/production_stage/tools/flash_download_tool.html]].
374 -
375 -5.1.3 Download la66 firmware flash tool in [[this link>>https://www.dropbox.com/scl/fo/9kqeqf6wmet10o9hgxuwa/h?rlkey=4ikrg6kg5v0yjxwhp0i37wrv7&e=1&dl=0]].
376 -
377 -5.1.4 Upload firmware to esp32
378 -
379 -Open flash_download_tool.exe, and then follow the steps below.
380 -
381 -[[image:1738893226894-758.png||height="170" width="176"]]
382 -
383 -[[image:image-20250207100150-7.png||height="476" width="538"]]
384 -
385 -5.1.5 Upload firmware to la66
386 -
387 -Open Dragino_Sensor_Manager_Utility.exe, and then follow the steps below.
388 -
389 -[[image:image-20250207101415-8.png||height="522" width="618"]]
390 -
391 -[[image:image-20250207101515-9.png||height="522" width="618"]]
392 -
393 -== 5.2 AT command and LTS5 panel data format ==
394 -
395 -AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**01**A4CBBB0A8E085C02,0,3
396 -
397 -AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**02**A4CB00,0,3
398 -
399 -AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**03**A4CB00,0,3
400 -
401 -AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**04**A4CB00,0,3
402 -
403 -AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**05**A4CB00,0,3
404 -
405 -AT+SEND=1,014b69746368656e2d467269676531FFFFA84041000181D4A8**06**A4CB00,0,3
406 -
407 -**LTS5 panel data format**:
408 -
409 -~1. AT+SEND=1,**01**  **4b69746368656e2d467269676531FFFF  A84041000181D4A8  01  A4CB  BB0A  8E08  5C02**,0,3
410 -
411 -**01:** encrypt. 1 Byte. 01 ~-~-> no encryption. This 1-byte information is now invalid; simply write 0x01 instead.
412 -
413 -**4b69746368656e2d467269676531FFFF: **Device Name. 16 Bytes. The Device Name for this piece of information is "Kitchen-Frige1," and the subsequent "FFFF" is intended to pad it up to 16 Bytes. The Device Name for this piece of information is 'Kitchen-Frige1,' and the subsequent 'FFFF' is intended to pad it up to 16 Bytes, but it is not necessary as the system can handle shorter names as well.
414 -
415 -**A84041000181D4A8:** Device EUI. 8 Bytes. The last three Bytes will be extracted by the ESP32-S3 and displayed on the screen.
416 -
417 -**01: **Panel Type. 1 Byte. 0x01~-~->Tem & Hum,
418 -
419 - 0x02~-~->Door,
420 -
421 - 0x03~-~->Water Leak,
422 -
423 - 0x04~-~->Occupied,
424 -
425 - 0x05~-~->Button,
426 -
427 - 0x06~-~->Alarm,
428 -
429 -**A4CB: **Battery level//. //2 Bytes. Battery Voltage =0xCBA4&0x3FFF=0x0BA4=2980mV
430 -
431 -**BB0A: **The temperature of the built-in sensor in LHT65N.// //2 Bytes. Temperature:  0x0ABB/100=27.47℃
432 -
433 -**8E08: **The temperature of the External temperature sensor.// //2 Bytes. Temperature:  0x088E/100=21.90℃
434 -
435 -**5C02：**The humidity of the built-in sensor in LHT65N. 2 Bytes. Humidity: 0x025C/10=60.4%
436 -
437 -2. AT+SEND=1,**01**  **4b69746368656e2d467269676531FFFF**  **A84041000181D4A8**  **02  A4CB  00**,0,3
438 -
439 -Specific sections of the data share the same function.
440 -
441 -**00: Status. **1 Byte//. //If Panel Type is 0x02, **Status: 00~-~->Open; 01~-~->Close.**
442 -
443 - If Panel Type is 0x03, **Status: 00~-~->Normal; 01~-~->Water Leaking.**
444 -
445 - If Panel Type is 0x04, **Status: 00~-~->Free; 01~-~->Occupied.**
446 -
447 - If Panel Type is 0x05, **Status: 00~-~->OFF; 01~-~->ON.**
448 -
449 - If Panel Type is 0x06, **Status: 00~-~->OFF; 01~-~->Alarm.**
450 -
451 -== 5.3 Usage ==
452 -
453 -After burning the firmware into LTS5, you can use an LA66 equipped with peer-to-peer firmware to send data to LTS5 via AT commands.
454 -
455 -5.3.1 Connect LA66 to the computer, open Serial Port Utility, and send the AT+CFG instruction to check whether the LA66 has downloaded correct program.
456 -
457 -[[image:image-20250207143131-11.png||height="527" width="547"]]
458 -
459 -5.3.2 Copy an AT instruction example, click "Send" button, then the led in LA66 will flash and the LTS5 will display the LoRa information.
460 -
461 -[[image:image-20250207144605-12.png||height="634" width="548"]]
462 -
463 -LTS5 receives this message and displays it on its screen as the image below shows.
464 -
465 -[[image:image-20250208181700-8.jpeg||height="528" width="704"]]
466 -
467 -= 6. Example Project 4: LoRaWAN_CLASS_C =
468 -
469 -
470 -The project achieves the function of receiving LoRaWAN Class C messages and displaying them on the screen. Note: The Things Network (TTN) needs to enable Class C support, and the LA66 within the LTS5 needs to operate in Class C mode.
471 -
472 -The downlink workflow proceeds as follows: The Things Network (TTN) sends a message in a specific format via downlink. Then, a LoRaWAN gateway relays this message to the LTS5. Finally, the LTS5 receives the message and displays it on its screen.
473 -
474 -The uplink workflow is as follows: The LA66 within the LTS5 sends a LoRaWAN message, for some reason, to a LoRaWAN gateway, which then forwards it to The Things Network (TTN).
475 -
476 -The project can be found at [[this link>>https://github.com/dragino/LoRa-HMI-Touch-Screen/tree/main/Example/LoRaWAN_CLASS_C]].
477 -
478 -== 6.1 firmware flashing approach ==
479 -
480 -The firmware flashing approach is the same as described in section 5.1.
481 -
482 -== 6.2 flowchart ==
483 -
484 -[[image:image-20250207164320-13.png||height="696" width="1344"]]
485 -
486 -== 6.3 Usage ==
487 -
488 -This section now describes a process involving TTN downlink panel data that is to be displayed on the LTS5 screen.
489 -
490 -6.3.1 Connect LA66 to the computer, open Serial Port Utility, and send the AT+CFG instruction to check whether the LA66 has downloaded correct program.
491 -
492 -[[image:image-20250207165702-14.png||height="830" width="563"]]
493 -
494 -6.3.2 Switch to Class C using "AT+CLASS=C", and check the class with "AT+CLASS=?".
495 -
496 -[[image:image-20250207173212-27.png]]
497 -
498 -[[image:image-20250207172246-20.png]]
499 -
500 -6.3.3 Verify LA66's join status (in LTS5) with "AT+NJS=?". If not joined, connect manually to LoRaWAN with "AT+JOIN".
501 -
502 -[[image:image-20250207172010-19.png]]
503 -
504 -[[image:image-20250207171650-17.png]]
505 -
506 -6.3.4 After joining, send a message to TTN, such as "AT+SENDB=01,02,8,05820802581ea0a5", to activate communication.
507 -
508 -[[image:image-20250207192107-28.png]]
509 -
510 -6.3.5 TTN distributes panel data in three phases: DEUI, Dev Name, and Sensor Data. The Dev Name, the last three bytes of the DEUI, and the panel type union together ensure the identification of a panel. Data about the same panel type will update the existing panel display, while data about a different panel type will create a new panel display on the LTS5 screen.
511 -
512 -There is an example for TTN downlink.
513 -
514 -1. downlink DEUI F1A84041000181D4A8
515 -1. downlink Dev Name F24B69746368656E2D467269676531FFFF
516 -1. downlink Sensor Data 5501A4CBBB0A8E085C02 or 5504A4CB01. Both of them are vaild formats for LTS5. Note: 0x55 as prefix and any other prefix except 0xF1, 0xF2, 0xF3 means downlink is Sensor Data.
517 -
518 -[[image:image-20250208175819-1.png||height="503" width="502"]]
519 -
520 -
521 -[[image:image-20250208175918-2.png||height="505" width="502"]]
522 -
523 -
524 -[[image:image-20250208180010-3.png||height="507" width="503"]]
525 -
526 -
527 -[[image:image-20250208181019-4.jpeg||height="592" width="790"]]
528 -
529 -
530 -[[image:image-20250208181328-7.png||height="505" width="504"]]
531 -
532 -
533 -[[image:image-20250208181139-5.jpeg||height="594" width="792"]]
534 -
535 -
536 -= 7. The method for adding a new type of panel to the project =
537 -
538 -If you don't have this need, then this part of the content can be ignored.
539 -
540 -1. Design a panel in SquareLine Studio, as shown in Image 7.1 below for reference.
541 -
542 542  [[image:image-20241121113445-1.png||height="584" width="934"]]
543 543  
544 - Image 7.1: a panel about water_leak
300 + image 5.1 a panel about water_leak
545 545  
302 +**2. Export the ui file.** You need  to adjust the export path first, then click "Export->Export UI Files". This step had been introduced before. Then you can get the ui files as shown in image 5.2.
546 546  
547 -2. **Export the UI file: **You need to adjust the export path first, then click '**Export -> Export UI Files**' on the menu bar. This step was introduced earlier. After that, you can get the UI files as shown in Image 7.2.
548 -
549 549  [[image:image-20241121141120-4.png||height="383" width="795"]]
550 550  
551 - Image 7.2: Exported UI files
306 + image 5.2 ui files exported
552 552  
308 +**3. Delete or rename some file.** Here are the steps:
553 553  
554 -3. **Delete and rename some file.** Here are the steps:
310 + Step1 Delete the 'components' directory.
311 + Step2 Delete 'filelist.txt'.
312 + Step3 Delete 'ui_helpers.c' and 'ui_helpers.h'.
313 + Step4 Rename 'ui_ScreenMain.c' in the 'screens' directory to 'ui_water_leak_style.c'.
314 + Step5 Rename the 'screens' directory to 'styles'.
555 555  
556 - Step 1: Delete the 'components' directory.
557 - Step 2: Delete 'filelist.txt'.
558 - Step 3: Delete 'ui_helpers.c' and 'ui_helpers.h'.
559 - Step 4: Rename 'ui_ScreenMain.c' in the 'screens' directory to 'ui_water_leak_style.c'.
560 - Step 5: Rename the 'screens' directory to 'styles'.
561 -
562 562  [[image:image-20241121151934-10.png||height="303" width="792"]]
563 563  
564 - image 7.3 rest file (1)
318 + image 5.3 rest file (1)
565 565  
566 566  [[image:image-20241121142925-7.png||height="141" width="793"]]
567 567  
568 - image 7.4 rest file (2)
322 + image 5.4 rest file (2)
569 569  
570 -4. Open the project in VS Code.
324 +**4. Open this project in vscode.**
571 571  
572 -5. Add the file include path for **water_leak** in **extra_lib/CMakeLists.txt**, as shown in Images 7.5 and 7.6. Its format is similar to that of **tem_hum** or **door**."
326 +5. Add file include path about water_leak in extra_lib/CMakeLists.txt as shown in image 5.5, 5.6, and its format is similar to the tem_hum or door.
573 573  
574 574  [[image:image-20241121181957-17.png||height="438" width="516"]]
575 575  
576 - image 7.5 extra_lib/CMakeLists.txt before adding
330 + image 5.5 extra_lib/CMakeLists.txt before add
577 577  
578 578  [[image:image-20241121182239-18.png||height="520" width="518"]]
579 579  
580 - image 7.6 extra_lib/CMakeLists.txt after adding
334 + image 5.6 extra_lib/CMakeLists.txt after add
581 581  
582 -6.  **Modify the header files included in the fonts and images directories**.
336 +**6. Modify header file include in fonts and images directory.** Open the fonts/ui_font_Font12.c file, as shown in image 5.7, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.8 is the modified image. Other font file need to be modified in same way.
583 583  
584 -Open the **fonts/ui_font_Font12.c** file, as shown in Image 7.7, and change **#include "../ui.h"** to **#include "../ui_water_leak.h"**. The modified file is shown in Image 7.8. Other font files need to be modified in the same way.
585 -
586 586  [[image:image-20241121171629-11.png]]
587 587  
588 - image 7.7 unmodified font file
340 + image 5.7 before-modified font file
589 589  
590 590  [[image:image-20241121171901-12.png]]
591 591  
592 - image 7.8 modified font file
344 + image 5.8 modified font file
593 593  
594 -Open the **images/ui_img_battery_empty_png.c** file, as shown in Image 7.9, and change **#include "../ui.h"** to **#include "../ui_water_leak.h"**. The modified file is shown in Image 7.10. Other image files need to be modified in the same way.
346 +Open the images/ui_img_battery_empty_png.c file, as shown in image 5.9, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.10 is the modified image. Other image file need to be modified in same way.
595 595  
596 596  [[image:image-20241121172714-13.png]]
597 597  
598 - image 7.9 unmodified image file
350 + image 5.9 before-modified image file
599 599  
600 600  [[image:image-20241121172908-14.png]]
601 601  
602 - image 7.10 modified image file
354 + image 5.10 modified image file
603 603  
604 -7. Modify the **ui_water_leak/CMakeLists.txt**. Open this file, and modify it as shown in image 7.11 (before) and image 7.12 (after).
356 +**7. Modify the ui_water_leak/CMakeLists.txt.** Open this file, and modify it from image 5.11 to image 5.12.
605 605  
606 606  [[image:image-20241121180030-15.png]]
607 607  
608 - image 7.11 ui_water_leak/CMakeLists.txt before modification
360 + image 5.11 ui_water_leak/CMakeLists.txt before modification
609 609  
610 610  [[image:image-20241121180517-16.png]]
611 611  
612 - image 7.12 ui_water_leak/CMakeLists.txt after modification
364 + image 5.12 ui_water_leak/CMakeLists.txt after modification
613 613  
366 +**8. Modify ui_water_leak.h file.** The image 5.13, 5.14 show the code before modification, and the image 5.15, 5.16 show the code after modification.
614 614  
615 -8. Modify the **ui_water_leak.h** file. Images 7.13 and 7.14 show the code before modification, while Images 7.15 and 7.16 show the code after modification.
616 -
617 617  [[image:image-20241122094200-23.png]]
618 618  
619 - image 7.13 ui_water_leak.h (1) before modification
370 + image 5.13 ui_water_leak.h (1) before modification
620 620  
621 621  [[image:image-20241122094320-24.png||height="852" width="554"]]
622 622  
623 - image 7.14 ui_water_leak.h (2) before modification
374 + image 5.14 ui_water_leak.h (2) before modification
624 624  
625 625  [[image:image-20241122094600-25.png||height="1078" width="554"]]
626 626  
627 - image 7.15 ui_water_leak.h (1) after modification
378 + image 5.15 ui_water_leak.h (1) after modification
628 628  
629 629  [[image:image-20241122094719-26.png||height="941" width="583"]]
630 630  
631 - image 7.16 ui_water_leak.h (2) before modification
382 + image 5.16 ui_water_leak.h (2) before modification
632 632  
633 -9. **Modify ui_water_leak.c file.** The image 7.17, 7.18, 7.19 show the code before modification, and the image 7.20, 7.21, 7.22 show the code after modification.
384 +**9. Modify ui_water_leak.c file.** The image 5.17, 5.18, 5.19 show the code before modification, and the image 5.20, 5.21, 5.22 show the code after modification.
634 634  
635 635  _ui_flag_modify( ((lv_obj_t *)(e->user_data)), LV_OBJ_FLAG_HIDDEN, _UI_MODIFY_FLAG_TOGGLE);  This code replaces 4 lines of code in ui_water_leak.c, so it is pasted here for convenience.
636 636  
637 637  [[image:image-20241122102929-27.png||height="619" width="426"]]
638 638  
639 - image 7.17 ui_water_leak.c (1) before modification
390 + image 5.17 ui_water_leak.c (1) before modification
640 640  
641 641  [[image:image-20241122112838-30.png||height="551" width="628"]]
642 642  
643 - image 7.18 ui_water_leak.c (2) before modification
394 + image 5.18 ui_water_leak.c (2) before modification
644 644  
645 645  [[image:image-20241122110815-29.png||height="725" width="712"]]
646 646  
647 - image 7.19 ui_water_leak.c (3) before modification
398 + image 5.19 ui_water_leak.c (3) before modification
648 648  
649 649  [[image:image-20241122113158-31.png||height="872" width="677"]]
650 650  
651 - image 7.20 ui_water_leak.c (1) after modification
402 + image 5.20 ui_water_leak.c (1) after modification
652 652  
653 653  [[image:image-20241122113259-33.png||height="874" width="724"]]
654 654  
655 - image 7.21 ui_water_leak.c (2) after modification
406 + image 5.21 ui_water_leak.c (2) after modification
656 656  
657 657  [[image:image-20241122113359-34.png||height="804" width="746"]]
658 658  
659 - image 7.22 ui_water_leak.c (3) after modification
410 + image 5.22 ui_water_leak.c (3) after modification
660 660  
661 -10. **Modify ui_water_leak_events.h file.** The image 7.23 show the code before modification, and the image 7.24 show the code after modification.
412 +**10. Modify ui_water_leak_events.h file.** The image 5.23 show the code before modification, and the image 5.24 show the code after modification.
662 662  
663 663  [[image:image-20241122134113-35.png||height="380" width="421"]]
664 664  
665 - image 7.23 ui_water_leak_events_.h before modification
416 + image 5.23 ui_water_leak_events_.h before modification
666 666  
667 667  [[image:image-20241122134420-37.png||height="201" width="283"]]
668 668  
669 -image 7.24 ui_water_leak_events_.h after modification
420 +image 5.24 ui_water_leak_events_.h after modification
670 670  
671 -11.** Modify ui_water_leak_events.c file.** The image 7.25 show the code before modification, and the image 7.26 show the code after modification.
422 +**11. Modify ui_water_leak_events.c file.** The image 5.25 show the code before modification, and the image 5.26 show the code after modification.
672 672  
673 673  Step1. '#include "ui.h"'~-~->'#include "ui_water_leak.h"'
674 674  
... ... @@ -682,15 +682,14 @@
682 682  
683 683  [[image:image-20241122135023-38.png||height="358" width="372"]]
684 684  
685 - image 7.25 ui_water_leak_events_.c before modification
436 + image 5.25 ui_water_leak_events_.c before modification
686 686  
687 687  [[image:image-20241122135258-39.png||height="403" width="559"]]
688 688  
689 - image 7.26 ui_water_leak_events_.c after modification
440 + image 5.26 ui_water_leak_events_.c after modification
690 690  
442 +**12. Modify ui_water_leak_style.c file.**
691 691  
692 -12. **Modify ui_water_leak_style.c file.**
693 -
694 694  Step1. '#include "../ui.h"'~-~->#include '"../ui_water_leak.h"'
695 695  
696 696   add '#include "../../sort.h"'
... ... @@ -699,68 +699,60 @@
699 699  
700 700  [[image:image-20241122141536-41.png||height="361" width="612"]]
701 701  
702 - image 7.27 ui_water_leak_style.c (1) before modification
452 + image 5.27 ui_water_leak_style.c (1) before modification
703 703  
704 704  [[image:image-20241122142129-42.png||height="386" width="613"]]
705 705  
706 - image 7.28 ui_water_leak_style.c (1) after modification
456 + image 5.28 ui_water_leak_style.c (1) after modification
707 707  
708 -
709 709  Step2. modify 'void ui_ScreenMain_screen_init(void)'~-~->'panel_with_type create_water_leak(uint8_t index)'
710 710  
711 - delete code as shown in image 7.29
460 + delete code as shown in image 5.29
712 712  
713 713  [[image:image-20241122145620-44.png||height="757" width="671"]]
714 714  
715 - image 7.29 ui_water_leak_style.c (2)
464 + image 5.29 ui_water_leak_style.c (2)
716 716  
466 +Step3. The image 5.30, 5.31 show the change.
717 717  
718 -Step3. The image 7.30, 7.31 show the change.
719 -
720 720  [[image:image-20241122152026-45.png||height="277" width="828"]]
721 721  
722 - image 7.30 ui_water_leak_style.c (3) before modification
470 + image 5.30 ui_water_leak_style.c (3) before modification
723 723  
724 724  [[image:image-20241122152542-46.png||height="293" width="830"]]
725 725  
726 - image 7.31 ui_water_leak_style.c (3) after modification
474 + image 5.31 ui_water_leak_style.c (3) after modification
727 727  
476 +Step4. Copy partly the code in ui_water_leak.c, paste at extra_lib/sort.h(The process is shown in image 5.32, 5.33).
728 728  
729 -Step4. Copy partly the code in ui_water_leak.c, paste at extra_lib/sort.h(The process is shown in image 7.32, 7.33).
730 -
731 731  [[image:image-20241122153958-47.png]]
732 732  
733 - image 7.32 ui_water_leak_style.c (4)
480 + image 5.32 ui_water_leak_style.c (4)
734 734  
735 -
736 736  [[image:image-20241122154755-49.png||height="864" width="513"]]
737 737  
738 - image 7.33 ui_water_leak_style.c (4)
484 + image 5.33 ui_water_leak_style.c (4)
739 739  
486 +Step5. Delete event function in code which was just pasted in extra_lib/sort.h(The process is shown in image 5.34).
740 740  
741 -Step5. Delete event function in code which was just pasted in extra_lib/sort.h(The process is shown in image 7.34).
742 -
743 743  [[image:image-20241122155650-50.png||height="922" width="513"]]
744 744  
745 - image 7.34 ui_water_leak_style.c (5)
490 + image 5.34 ui_water_leak_style.c (5)
746 746  
492 +Step6. Add some lines of code in extra_lib/sort.h as shown in image 5.35.
747 747  
748 -Step6. Add some lines of code in extra_lib/sort.h as shown in image 7.35.
749 -
750 750  [[image:image-20241122161934-51.png]]
751 751  
752 - image 7.35
496 + image 5.35
753 753  
498 +Step7. Add a line of code in extra_lib/sort.h as shown in image 5.36.
754 754  
755 -Step7. Add a line of code in extra_lib/sort.h as shown in image 7.36.
756 -
757 757  [[image:image-20241122162852-53.png||height="330" width="529"]]
758 758  
759 - image 7.37
502 + image 5.37
760 760  
504 +Step8. Add some code in ui_water_leak_style.c as shown in image 5.38 from line534 to line 576 in detail.
761 761  
762 -Step8. Add some code in ui_water_leak_style.c as shown in image 7.38 from line534 to line 576 in detail.
763 -
764 764  panel_with_type union_sensor;
765 765  
766 766  union_sensor.panel_type = WATER_LEAK_TYPE;
... ... @@ -773,45 +773,38 @@
773 773  
774 774  return union_sensor;
775 775  
776 -[[image:image-20250122173546-6.png||height="777" width="922"]]
518 +[[image:image-20241122171211-54.png||height="635" width="792"]]
777 777  
778 - image 7.38
520 + image 5.38
779 779  
522 +**13. Modify sort.c file.**
780 780  
781 -13. Rest midification in sort.h file.
524 +Add a line of code ~-~-'#include "ui_water_leak.h"' as shown in image 5.39 line 16.
782 782  
783 -In image 7.39 as below, we can see "WATER_LEAK_TYPE" at line 24 and water leak switch status definition at line 32,33, and these are what we need to add in sort.h.
526 +[[image:image-20241122173718-56.png||height="378" width="579"]]
784 784  
785 -[[image:image-20250122170230-1.png||height="580" width="513"]]
528 + image 5.39 sort.c (1)
786 786  
787 - image 7.39 sort.h
530 +There are still some changes need to be done in sort.c, and omit here for the moment.
788 788  
789 -13. **Modify sort.c file.**
790 790  
791 -Add a line of code ~-~-'#include "ui_water_leak.h"' as shown in image 5.39 line 26.
792 792  
793 -[[image:image-20250122171910-5.png||height="524" width="510"]]
794 794  
795 - image 7.40 sort.c (1)
796 796  
797 -There are still some changes need to be done in sort.c, and omit here for the moment.
536 += 6. FAQ =
798 798  
538 +== 6.1 ==
799 799  
800 800  
801 -= 8. FAQ =
541 += 7. Order Info =
802 802  
803 -== 8.1 ==
543 +== 7.1  Part Number ==
804 804  
805 805  
806 -= 9. Order Info =
807 -
808 -== 9.1  Part Number ==
809 -
810 -
811 811  Part Number: (% style="color:#4472c4" %)LTS5
812 812  
813 813  
814 -== 9.2  Packing Info ==
549 +== 7.2  Packing Info ==
815 815  
816 816  
817 817  **Package Includes**:
... ... @@ -820,21 +820,20 @@
820 820  * 5V,2A DC Power Adapter.
821 821  * USB Type C Program Cable
822 822  
823 -= 10. Support =
558 += 8. Support =
824 824  
825 825  
826 826  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
827 827  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
828 828  
829 -= 11.  Reference material =
564 += 9.  Reference material =
830 830  
831 831  
832 832  * Datasheet
833 -* schematic: [[LTS5-V1>>attach:LTS5-V1.pdf]]
834 -* Source Code: [[dragino/LoRa-HMI-Touch-Screen: Open Source LoRa / LoRaWAN HMI Touch Screen Project>>url:https://github.com/dragino/LoRa-HMI-Touch-Screen/tree/main]]
568 +* Source Code
835 835  * Mechinical
836 836  
837 -= 12. FCC Warning =
571 += 10. FCC Warning =
838 838  
839 839  
840 840  This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
1738893226894-758.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -25.6 KB
Content
LTS5-V1.pdf
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -661.6 KB
Content
Screenshot 2024-12-24 134818.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -15.0 KB
Content
Screenshot 2024-12-24 134937.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 KB
Content
Screenshot 2024-12-24 140459.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -12.0 KB
Content
Screenshot 2024-12-24 144005.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -28.0 KB
Content
image-20241226135550-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -293.3 KB
Content
image-20250122170230-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -77.3 KB
Content
image-20250122171809-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.1 KB
Content
image-20250122171825-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.1 KB
Content
image-20250122171832-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.1 KB
Content
image-20250122171910-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.1 KB
Content
image-20250122173546-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -200.4 KB
Content
image-20250207100150-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -54.1 KB
Content
image-20250207101415-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -17.6 KB
Content
image-20250207101515-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -24.1 KB
Content
image-20250207142334-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -62.0 KB
Content
image-20250207143131-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -48.7 KB
Content
image-20250207144605-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -58.1 KB
Content
image-20250207164320-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -194.5 KB
Content
image-20250207165702-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -78.1 KB
Content
image-20250207170215-15.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -2.6 KB
Content
image-20250207170307-16.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -2.2 KB
Content
image-20250207171650-17.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -11.0 KB
Content
image-20250207171851-18.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -2.5 KB
Content
image-20250207172010-19.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -2.5 KB
Content
image-20250207172246-20.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -2.5 KB
Content
image-20250207172443-21.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -3.9 KB
Content
image-20250207172821-22.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -0 bytes
Content
image-20250207172834-23.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -0 bytes
Content
image-20250207173152-24.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -3.9 KB
Content
image-20250207173159-25.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -3.9 KB
Content
image-20250207173206-26.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -3.9 KB
Content
image-20250207173212-27.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -3.9 KB
Content
image-20250207192107-28.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -14.3 KB
Content
image-20250208170737-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -36.9 KB
Content
image-20250208170758-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -36.9 KB
Content
image-20250208175819-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -36.3 KB
Content
image-20250208175918-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -37.8 KB
Content
image-20250208180010-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -36.7 KB
Content
image-20250208181019-4.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -546.8 KB
Content
image-20250208181139-5.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -320.5 KB
Content
image-20250208181317-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20250208181328-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20250208181700-8.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -526.4 KB
Content
squalreline-trial.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
squareline-studio-launcher-screen.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -203.4 KB
Content
squareline.io_downloads.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 MB
Content