Skip to Content
Last modified by BoYang Xie on 2025/07/24 16:47
From version 141.2
edited by BoYang Xie
on 2025/01/22 17:36
Change comment: There is no comment for this version
To version 4.12
edited by Edwin Chen
on 2024/09/16 09:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.xieby
1 +XWiki.Edwin
Content
... ... @@ -1,13 +1,9 @@
1 -
1 +
2 +[[image:image-20240915231842-1.png]]
2 2  
3 -(% style="text-align:center" %)
4 -[[image:image-20241226135550-1.png]]
5 5  
6 -
7 -
8 -
9 9  (% _mstvisible="1" %)
10 -(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents:**
6 +(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -20,22 +20,20 @@
20 20  
21 21  = 1.  Introduction =
22 22  
23 -== 1.1  What is the LTS5 LoRa HMI Touch Screen? ==
19 +== 1.1  What is LTS5 LoRa HMI touch screen ==
24 24  
21 +LTS5 is a (% style="color:blue" %)LoRa / LoRaWAN HMI Touch Screen(%%) designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.
25 25  
26 -The LTS5 is a (% style="color:blue" %)**LoRa / LoRaWAN HMI Touch Screen**(%%) designed for displaying information in IoT projects. It features a **5.0-inch HMI touch screen** and supports **Wi-Fi**, **Bluetooth**, and **LoRa** wireless protocols.
23 +LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.
27 27  
28 -The LTS5 is an open-source software project powered by an **ESP32 MCU** and a **Dragino LA66 LoRa** module. The extensive development resources available for ESP32 can significantly reduce development time.
25 +The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the display UI for different application.
29 29  
30 -The LTS5's HMI touch screen supports **drag-and-drop** design, allowing developers to use SquareLine to easily customize the display UI for various applications.
27 +LTS5 use LA66 LoRa module, this module can be program to support private LoRa protocol or LoRaWAN protocol.
31 31  
32 -The LA66 LoRa module can be programmed to support either private LoRa protocols or the LoRaWAN protocol.
33 33  
34 34  == 1.2  Features ==
35 35  
36 -
37 -* ESP32-WROOM MCU: 8MB RAM & 16MB ROM
38 -* Dragino LA66 LoRa Module
32 +* ESP32-WROOM MCU + Dragino LA66 LoRa Module
39 39  * Support Private LoRa protocol or LoRaWAN protocol
40 40  * Support WiFi & BLE wireless protocol
41 41  * 5.0" HMI touch screen
... ... @@ -46,17 +46,11 @@
46 46  * 5V DC power
47 47  * IP Rating: IP52
48 48  
49 -== 1.3  Specifications ==
50 50  
44 +== 1.3  Specification ==
51 51  
52 52  **LoRa**:
53 53  
54 -* Frequency Range: 870 MHz ~~ 960 MHz
55 -* TCXO crystal to ensure RF performance on low temperature
56 -* Maximum Power +22 dBm constant RF output
57 -* High sensitivity: -148 dBm
58 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
59 -* LoRa Rx current: <9 mA
60 60  
61 61  **WiFi:**
62 62  
... ... @@ -80,20 +80,21 @@
80 80  * RGB color.
81 81  * Display Area: 120.7*75.80 mm
82 82  
71 +
72 +
83 83  == 1.4  Power Consumption ==
84 84  
85 -
86 86  * External 5V DC power adapter
87 87  
77 +
88 88  == 1.5  Storage & Operation Temperature ==
89 89  
90 -
91 91  * Operation Temperature: -20 ~~ 70°C  (No Dew)
92 92  * Storage Temperature: -30 ~~ 70°C  (No Dew)
93 93  
83 +
94 94  == 1.6  Applications ==
95 95  
96 -
97 97  * Smart Buildings & Home Automation
98 98  * Logistics and Supply Chain Management
99 99  * Smart Metering
... ... @@ -101,531 +101,722 @@
101 101  * Smart Cities
102 102  * Smart Factory
103 103  
104 -= 2.  Getting Started with 'Hello World' =
105 105  
106 -== 2.1  About this demo ==
94 += 2.  Operation Mode =
107 107  
96 +== 2.1  How it work? ==
108 108  
109 -This getting started example demonstrates how to design and deploy a simple display UI for the LTS5 device. The example includes:
110 110  
111 -* Creating a basic UI with a single button.
112 -* Implementing functionality to navigate the Web UI to a new page when the button is clicked.
113 -* Uploading the UI to the LTS5 device.
99 +Each PB01 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use PB01 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if PB01 is under this LoRaWAN network coverage, PB01 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.
114 114  
115 -By completing this demo, you will gain foundational knowledge for customizing the LTS5 interface and building more advanced IoT applications.
116 116  
102 +== 2.2  How to Activate PB01? ==
117 117  
118 -== 2.2  Install Software Running Environment ==
119 119  
105 +(% style="color:red" %)** 1.  Open enclosure from below position.**
120 120  
121 -The **ESP MCU** supports development with **ESP-IDF**, **Arduino**, or **MicroPython**. We use **ESP-IDF** for compilation and **Visual Studio Code (VS Code)** as the development environment for this project.
107 +[[image:image-20220621093835-1.png]]
122 122  
123 123  
124 -=== 2.2.1 Install VS Code and ESP-IDF extension ===
110 +(% style="color:red" %)** 2.  Insert 2 x AAA LR03 batteries and the node is activated.**
125 125  
112 +[[image:image-20220621093835-2.png]]
126 126  
127 -First, download and install **VS Code** for your operating system from the Visual Studio Code website: [[Visual Studio Code - Mac, Linux, Windows>>https://code.visualstudio.com/download]].
128 128  
129 -Next, install the **ESP-IDF** extension within **VS Code**. Detailed steps for this process are shown in Image 1.
115 +(% style="color:red" %)** 3. Under the above conditions, users can also reactivate the node by long pressing the ACT button.**
130 130  
117 +[[image:image-20220621093835-3.png]]
131 131  
132 -[[image:image-20240928110211-5.png||height="508" width="866"]]
133 133  
134 - Image 1: ESP-IDF extension install
120 +User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of PB01.
135 135  
136 -Links for reference: [[Install ESP32 ESP-IDF on Windows and Integrate with VS code (esp32tutorials.com)>>url:https://esp32tutorials.com/install-esp32-esp-idf-windows-integrate-vs-code/#:~~:text=In%20this%20tutorial,%20we%20will%20show%20you%20how%20to%20install]]
137 137  
123 +== 2.3  Example to join LoRaWAN network ==
138 138  
139 -=== 2.2.2 Install SquareLine Studio ===
140 140  
126 +This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
141 141  
142 -Download and install the latest version of [[SquareLine Studio>>https://squareline.io/downloads#lastRelease]] on your computer. It supports Windows, Linux, and Mac OS. The software version we are using here is 1.5.0. See the image below.
128 +(% _mstvisible="1" class="wikigeneratedid" %)
129 +Assume the LPS8v2 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the PB01 device in TTN V3 portal. 
143 143  
144 -[[image:squareline.io_downloads.png||height="888" width="1294"]]
131 +[[image:image-20240705094824-4.png]]
145 145  
133 +(% style="color:blue" %)**Step 1**(%%):  Create a device in TTN V3 with the OTAA keys from PB01.
146 146  
147 -After installation, you can use SquareLine Studio with a **PERSONAL license plan**. Click **LOG IN** and create a free account using your email address. Then activate your PERSONAL license plan for free. You don’t need to provide any credit card information. However, the PERSONAL license plan has the following limitations:
135 +Each PB01 is shipped with a sticker with the default DEV EUI as below:
148 148  
149 -* Max. 10 screens
150 -* Max. 150 widgets
151 -* Max. 5 global colors
152 -* Max. 2 themes
153 -* Max. 1 component
137 +[[image:image-20230426083617-1.png||height="294" width="633"]]
154 154  
155 -== 2.3 Simple usage of SquareLine Studio and exporting UI code ==
156 156  
140 +Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:
157 157  
158 -Start the SquareLine Studio. The **launcher screen** appears as shown in the below image. You can create a new project by clicking **Create** in the top menu. Then select the **Desktop** tab. Select the development platform, **Eclipse with  SDL for development on PC**.
142 +Create application.
159 159  
160 -* In the **PROJECT SETTINGS**, select **LVGL version **as **8.3.11** and **Resolution** as **800** x **480**.
161 -* Select the **CREATE **button to create the new project with the selected settings.
144 +choose to create the device manually.
162 162  
163 -[[image:squareline-studio-launcher-screen.png||height="752" width="1415"]]
146 +Add JoinEUI(AppEUI), DevEUI, AppKey.(% style="display:none" %)
164 164  
148 +[[image:image-20240507142116-1.png||height="410" width="1138"]](% style="display:none" %) (%%)
149 +
165 165  
166 -Next, you need to configure some additional settings for this project. To do so, select** File  -> Project Settings** as shown in the image below.
151 +[[image:image-20240507142157-2.png||height="559" width="1147"]]
167 167  
168 -[[image:1727229582471-566.png]]
153 +[[image:image-20240507142401-3.png||height="693" width="1202"]]
169 169  
155 +[[image:image-20240507142651-4.png||height="760" width="1190"]]
170 170  
171 -In the **PROJECT SETTINGS** dialog box, configure/modify the project settings as shown in the image below.
157 +**Default mode OTAA**(% style="display:none" %)
172 172  
173 -* **UI Files Export Root**: Select a folder on your computer to store the UI files.
174 -* **LVGL Include Path**: Set this to **lvgl.h**
175 -* Click on the **APPLY CHANGES** button.
176 176  
177 -[[image:image-20240928105309-4.png||height="526" width="556"]]
160 +(% style="color:blue" %)**Step 2**(%%):  Use ACT button to activate PB01 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
178 178  
162 +[[image:image-20240507143104-5.png||height="434" width="1398"]]
179 179  
180 -Now you can start building the user interface. Follow the steps below:
181 181  
165 +== 2.4  Uplink Payload ==
182 182  
183 -=== **Add widgets** ===
184 184  
168 +Uplink payloads include two types: Valid Sensor Value and other status / control command.
185 185  
186 -To add a widget, navigate to the **Widgets** panel, and then click on the widget you want to add to the screen. You can reposition the widgets in the screen area by clicking and dragging them. Now add a **Label**, **Button**, and **Image** as shown in the image below. The added widgets are also displayed in the **Hierarchy **panel.
170 +* Valid Sensor Value: Use FPORT=2
171 +* Other control command: Use FPORT other than 2.
187 187  
188 -[[image:image-20240928111412-6.png||height="526" width="864"]]
173 +=== 2.4.1  Uplink FPORT~=5, Device Status ===
189 189  
190 190  
191 -Then click the **Screen **widget to add the second screen. After adding the second screen, it will appear in the Screens panel as **Screen2**.
176 +Users can  get the Device Status uplink through the downlink command:
192 192  
193 -[[image:Screenshot 2024-12-24 140459.png||height="278" width="290"]]
178 +(% style="color:#4472c4" %)**Downlink:  **(%%)**0x2601**
194 194  
195 -=== **Modify widget properties** ===
180 +Uplink the device configures with FPORT=5.
196 196  
182 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:370px" %)
183 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**Size(bytes)(% style="display:none" %) (%%)**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**
184 +|(% style="width:99px" %)Value|(% style="width:62px" %)Sensor Model|(% style="width:80px" %)Firmware Version|(% style="width:82px" %)Frequency Band|(% style="width:85px" %)Sub-band|(% style="width:46px" %)BAT
197 197  
198 -The area for modifying widgets is called the **Inspector** panel. The Inspector panel consists of four sections: **COMPONENT**, **<WIDGET>**, **STYLE SETTINGS**, and **EVENTS**, as shown in the image below. The second section allows you to adjust a widget's layout, size, position, alignment, flags, states, and more. When you select a widget on the screen, the name of this section changes to match the name of the selected widget.
186 +[[image:image-20240507152130-12.png||height="469" width="1366"]](% style="display:none" %)
199 199  
200 -[[image:1727485118799-984.png]]
188 +Example Payload (FPort=5):  [[image:image-20240507152254-13.png||height="26" width="130"]]
201 201  
202 202  
203 -==== **Changing the Button properties** ====
191 +(% style="color:#4472c4" %)**Sensor Model**(%%): For PB01, this value is 0x35.
204 204  
193 +(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.
205 205  
206 -Click the **Button **you have added to the screen. Under the **Layout** you can change the button's position and size. Use the following settings:
195 +(% style="color:#4472c4" %)**Frequency Band**:
207 207  
208 -* **Flex Flow**: No Layout
209 -* **Transform**:
210 -** **X**: 331 px
211 -** **Y**: 203 px
212 -** **Width**: 100 px
213 -** **Height**: 50 px
214 -** **Align**: CENTER
197 +*0x01: EU868
215 215  
216 -[[image:1727485251053-655.png]]
199 +*0x02: US915
217 217  
201 +*0x03: IN865
218 218  
219 -Next, add a click event to the button. When the button is clicked, an event should trigger to change the current screen (Screen1) to a new screen (Screen2) with a fade effect and the transition from Screen1 to Screen2 should take 500ms.
203 +*0x04: AU915
220 220  
221 -* Click **ADD EVENT** button. A new section will appear to configure this event.
205 +*0x05: KZ865
222 222  
223 -[[image:Screenshot 2024-12-24 134937.png||height="80" width="290"]]
207 +*0x06: RU864
224 224  
225 -* Select **CLICKED** from the dropdown under **Trigger**. Choose **CHANGE SCREEN** under **Action**, then click the **ADD** button. A new section will appear to configure the action.
209 +*0x07: AS923
226 226  
227 -[[image:Screenshot 2024-12-24 134818.png||height="222" width="290"]]
211 +*0x08: AS923-1
228 228  
229 -* Select **Screen2** under **Screen to**. Select **FADE ON** from **Fade mode**. The default value **500** means the transition takes 500 milliseconds to appear the Screen2.
230 -* Finally, click the **ADD** button.
213 +*0x09: AS923-2
231 231  
232 -[[image:1727485480434-713.png||height="395" width="290"]]
215 +*0x0a: AS923-3
233 233  
234 - Image 8: Add an event for the button
235 235  
218 +(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
236 236  
237 -==== **Changing the label properties** ====
220 +(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for PB01.
238 238  
222 +(% style="color:#4472c4" %)**Ex1**(%%): 0x0C DE = 3294mV
239 239  
240 -Click the Label you have added to the screen. Under the **Label** section, type "**Click for Detail**" in the **Text** textbox.
241 241  
242 -[[image:image-20240928090825-1.png||height="327" width="391"]]
225 +=== 2.4.2  Uplink FPORT~=2, Real time sensor value ===
243 243  
244 244  
245 -Once you enter the text, it will immediately appear on the label.
228 +PB01 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].
246 246  
230 +Uplink uses FPORT=2 and every 20 minutes send one uplink by default.
247 247  
248 -==== **Changing image properties** ====
232 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460px" %)
233 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
234 +**Size(bytes)**
235 +)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)2|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
236 +**1**
237 +)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
238 +**1**
239 +)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)(((
240 +**2**
241 +)))|=(% style="width: 40px;background-color:#4F81BD;color:white" %)(((
242 +**2**
243 +)))
244 +|(% style="width:97px" %)(((
245 +Value
246 +)))|(% style="width:39px" %)Battery|(% style="width:39px" %)(((
247 +Sound_ACK
249 249  
249 +&Sound_key
250 +)))|(% style="width:100px" %)(((
251 +(((
252 +Alarm
253 +)))
254 +)))|(% style="width:77px" %)(((
255 +(((
256 +Temperature
257 +)))
258 +)))|(% style="width:47px" %)(((
259 +Humidity
260 +)))
250 250  
251 -To use the **Image **widget, you should first add an image to your project. The image format must be PNG, and its resolution should not exceed 800x480 pixels. There are two ways to add an image file.
262 +Example in TTN.
252 252  
253 -One way is to move your image into the folder "…/squareline project/assets/", as shown in the image below.
264 +[[image:image-20240507150155-11.png||height="549" width="1261"]]
254 254  
255 -[[image:image-20240928113424-9.png||height="355" width="505"]]
266 +Example Payload (FPort=2):  (% style="background-color:yellow" %)**0C EA 03 01 01 11 02 A8**
256 256  
268 +==== (% style="color:blue" %)**Battery:**(%%) ====
257 257  
258 -The other way is to click the "**ADD FILE INTO ASSETS**" button, then select an image from your computer to import. After adding, you can see the image in the "**assets**" panel in SquareLine Studio, as shown in the image below.
270 +Check the battery voltage.
259 259  
260 -[[image:image-20240928114139-10.png||height="559" width="810"]]
272 +* Ex1: 0x0CEA = 3306mV
273 +* Ex2: 0x0D08 = 3336mV
261 261  
275 +==== (% style="color:blue" %)**Sound_ACK & Sound_key:**(%%) ====
262 262  
263 -==== **The relationship between widgets** ====
277 +Key sound and ACK sound are enabled by default.
264 264  
279 +* Example1: 0x03
265 265  
266 -Widgets commonly have two types of relationships: **parallel** and **parent-child**.
281 + Sound_ACK: (03>>1) & 0x01=1, OPEN.
267 267  
268 -* In a **parallel relationship**, widgets' positions are determined relative to a shared reference object.
269 -* In a **parent-child relationship**, any part of the child object outside the parent's boundaries is hidden by default. To make the child object fully visible, you must adjust its position to fit within the parent's range.
283 +**~ ** Sound_key:  03 & 0x01=1, OPEN.
270 270  
271 -[[image:1727486567182-334.png||height="318" width="278"]]
285 +* Example2: 0x01
272 272  
287 + Sound_ACK: (01>>1) & 0x01=0, CLOSE.
273 273  
274 -Move the label, **Label1** to make it a child of **Button1** as shown in the image below.
289 +**~ ** Sound_key:  01 & 0x01=1, OPEN.
275 275  
276 -[[image:image-20240928112001-8.png||height="431" width="796"]]
277 277  
292 +==== (% style="color:blue" %)**Alarm:**(%%) ====
278 278  
279 -Then set the **X** and **Y** position of the label to **0** as shown in the image below. The label will appear on the button. If you move the button on the screen, the label will move along with it as part of the button.
294 +Key alarm.
280 280  
281 -[[image:Screenshot 2024-12-24 144005.png||height="360" width="290"]]
296 +* Ex1: 0x01 & 0x01=1, TRUE.
297 +* Ex2: 0x00 & 0x01=0, FALSE.
282 282  
299 +==== (% style="color:blue" %)**Temperature:**(%%) ====
283 283  
284 -==== **Preview the screen** ====
301 +* Example1:  0x0111/10=27.3℃
302 +* Example2:  (0xFF0D-65536)/10=-24.3℃
285 285  
304 +If payload is: FF0D :  (FF0D & 8000 == 1) , temp = (FF0D - 65536)/100 =-24.3℃
286 286  
287 -You can test the result by clicking on the **PLAY** button as shown in the image below. The screen will change into play mode.
306 +（FF0D & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
288 288  
289 -[[image:1727487368023-281.png]]
290 290  
309 +==== (% style="color:blue" %)**Humidity:**(%%) ====
291 291  
292 -For more information, please visit the official link: [[SquareLine Studio 1.4.2 Documentation ~| SquareLine Studio>>url:https://docs.squareline.io/docs/squareline/]].
311 +* Humidity:    0x02A8/10=68.0%
293 293  
313 +=== 2.4.3  Uplink FPORT~=3, Datalog sensor value ===
294 294  
295 -== 2.4 Integrate UI Code to ESP-IDF Project ==
296 296  
316 +PB01 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.
297 297  
298 -To integrate, first export the UI code, then make some modifications, and finally relocate the UI code to a specific position within the project.
318 +[[image:image-20240510144912-1.png||height="471" width="1178"]](% style="display:none" %)
299 299  
300 -On the  menubar, click **Export -> Export UI** Files as shown in the image below.
301 301  
302 -[[image:1727229798126-306.png]]
321 +* Each data entry is 11 bytes, to save airtime and battery, PB01 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)
303 303  
323 +For example, in US915 band, the max payload for different DR is:
304 304  
305 -The exported UI files can be found in your SquareLine project folder as shown in the image below.
325 +1. **DR0**: max is 11 bytes so one entry of data
326 +1. **DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
327 +1. **DR2**: total payload includes 11 entries of data
328 +1. **DR3**: total payload includes 22 entries of data.
306 306  
330 +(% style="color:red" %)**Notice: PB01 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**
307 307  
308 -[[image:1727229821582-258.png||height="333" width="662"]]
332 +See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].
309 309  
334 +(% style="display:none" %) (%%)
310 310  
311 -Create a new folder named "**ui**" at path "**basic_prj/app_components/ui/**", and copy all the exported UI code into it as shown in the image below.
336 +=== 2.4.4  Decoder in TTN V3 ===
312 312  
313 -[[image:image-20240928144830-11.png]]
314 314  
339 +In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.
315 315  
316 -Open the **CMakeLists.txt** file and edit it as ahown below.
341 +In TTN , add formatter as below:
317 317  
318 -[[image:1727229892636-154.png||height="521" width="407"]]
343 +[[image:image-20240507162814-16.png||height="778" width="1135"]]
319 319  
345 +(((
346 +Please check the decoder from this link:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
347 +)))
320 320  
321 -Open the main.c file and  add two lines of code as shown in the below images.
349 +(((
350 +
351 +)))
322 322  
323 -Add **#include "ui.h"**
353 +== 2.5 Show data on Datacake ==
324 324  
325 -[[image:1727229926561-300.png]]
326 326  
356 +(((
357 +Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
358 +)))
327 327  
328 -Add **ui_init();**
360 +(((
361 +
362 +)))
329 329  
330 -[[image:1727229955611-607.png]]
364 +(((
365 +(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the LoRaWAN network.
366 +)))
331 331  
368 +(((
369 +(% style="color:blue" %)**Step 2**(%%):  Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
370 +)))
332 332  
333 -== 2.5 Brief introduction to the Hello World project ==
372 +(((
373 +~1. Add Datacake:
374 +)))
334 334  
376 +(((
377 +2. Select default key as Access Key:
378 +)))
335 335  
336 -The project consists of two screens. The first screen displays the company's logo, the project name, and a button to navigate to the next screen. The second screen provides information about the HMI screen product through an image and includes a button to return to the previous screen.
380 +(((
381 +3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add PB01:
382 +)))
337 337  
384 +(((
385 + Please refer to the figure below.
386 +)))
338 338  
339 -== 2.6 Test Result ==
388 +[[image:image-20240510150924-2.png||height="612" width="1186"]]
340 340  
341 341  
342 -By pressing the button located at the bottom right, the screen switches to the next one as expected. This confirms that the UI file has been successfully integrated into the project and is functioning correctly.
391 +Log in to DATACAKE, copy the API under the account.
343 343  
344 -Screen 1:
393 +[[image:image-20240510151944-3.png||height="581" width="1191"]]
345 345  
346 -[[image:1727488067077-684.png||height="402" width="574"]]
347 347  
348 348  
349 -Screen 2:
397 +[[image:image-20240510152150-4.png||height="697" width="1188"]]
350 350  
351 -[[image:1727488157579-949.png||height="397" width="572"]]
352 352  
400 +[[image:image-20240510152300-5.png||height="298" width="1191"]]
353 353  
354 -= 3. Example Project 1: LoRa Central Display =
355 355  
356 -[[image:image-20240916101737-1.png||height="468" width="683"]]
403 +[[image:image-20240510152355-6.png||height="782" width="1193"]]
357 357  
405 +[[image:image-20240510152542-8.png||height="545" width="739"]]
358 358  
359 -= 4. Example Project 2: LoRaWAN RS485 Alarm =
407 +[[image:image-20240510152634-9.png||height="748" width="740"]]
360 360  
361 -= 5. The method for adding a new type of panel to the project =
362 362  
363 -If you don't have this need, then this part of the content can be ignored.
410 +[[image:image-20240510152809-10.png||height="607" width="732"]]
364 364  
365 -1. Design a panel in SquareLine Studio, as shown in Image 5.1 below for reference.
412 +[[image:image-20240510153934-14.png||height="460" width="1199"]]
366 366  
367 -[[image:image-20241121113445-1.png||height="584" width="934"]]
368 368  
369 - Image 5.1: a panel about water_leak
415 +[[image:image-20240510153435-12.png||height="428" width="1197"]]
370 370  
371 371  
372 -2. **Export the UI file: **You need to adjust the export path first, then click '**Export -> Export UI Files**' on the menu bar. This step was introduced earlier. After that, you can get the UI files as shown in Image 5.2.
418 +Copy and paste the [[TTN decoder>>https://github.com/dragino/dragino-end-node-decoder]] here and save.
373 373  
374 -[[image:image-20241121141120-4.png||height="383" width="795"]]
420 +[[image:image-20240510153624-13.png||height="468" width="1195"]]
375 375  
376 - Image 5.2: Exported UI files
377 377  
423 +Visual widgets please read the DATACAKE documentation.
378 378  
379 -3. **Delete and rename some file.** Here are the steps:
425 +(% style="display:none" %) (%%)
380 380  
381 - Step 1: Delete the 'components' directory.
382 - Step 2: Delete 'filelist.txt'.
383 - Step 3: Delete 'ui_helpers.c' and 'ui_helpers.h'.
384 - Step 4: Rename 'ui_ScreenMain.c' in the 'screens' directory to 'ui_water_leak_style.c'.
385 - Step 5: Rename the 'screens' directory to 'styles'.
427 +== 2.6  Datalog Feature ==
386 386  
387 -[[image:image-20241121151934-10.png||height="303" width="792"]]
388 388  
389 - image 5.3 rest file (1)
430 +(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
431 +When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.
390 390  
391 -[[image:image-20241121142925-7.png||height="141" width="793"]]
392 392  
393 - image 5.4 rest file (2)
434 +=== 2.6.1  Unix TimeStamp ===
394 394  
395 -4. Open the project in **VS Code**.
396 396  
397 -5. Add the file include path for **water_leak** in **extra_lib/CMakeLists.txt**, as shown in Images 5.5 and 5.6. Its format is similar to that of **tem_hum** or **door**."
437 +Unix TimeStamp shows the sampling time of uplink payload. format base on
398 398  
399 -[[image:image-20241121181957-17.png||height="438" width="516"]]
439 +[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
400 400  
401 - image 5.5 extra_lib/CMakeLists.txt before add
441 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
402 402  
403 -[[image:image-20241121182239-18.png||height="520" width="518"]]
443 +For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)
404 404  
405 - image 5.6 extra_lib/CMakeLists.txt after add
406 406  
407 -6.  **Modify the header files included in the fonts and images directories**.
446 +[[image:1655782409139-256.png]]
408 408  
409 -Open the **fonts/ui_font_Font12.c** file, as shown in Image 5.7, and change **#include "../ui.h"** to **#include "../ui_water_leak.h"**. The modified file is shown in Image 5.8. Other font files need to be modified in the same way.
410 410  
411 -[[image:image-20241121171629-11.png]]
449 +=== 2.6.2  Poll sensor value ===
412 412  
413 - image 5.7 before-modified font file
414 414  
415 -[[image:image-20241121171901-12.png]]
452 +(((
453 +User can poll sensor value based on timestamps from the server. Below is the downlink command.
454 +)))
416 416  
417 - image 5.8 modified font file
456 +(((
457 +Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
458 +)))
418 418  
419 -Open the **images/ui_img_battery_empty_png.c** file, as shown in Image 5.9, and change **#include "../ui.h"** to **#include "../ui_water_leak.h"**. The modified file is shown in Image 5.10. Other image files need to be modified in the same way.
460 +(((
461 +For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)
462 +)))
420 420  
421 -[[image:image-20241121172714-13.png]]
464 +(((
465 +Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data
466 +)))
422 422  
423 - image 5.9 before-modified image file
468 +(((
469 +Uplink Internal =5s，means PB01 will send one packet every 5s. range 5~~255s.
470 +)))
424 424  
425 -[[image:image-20241121172908-14.png]]
426 426  
427 - image 5.10 modified image file
473 +=== 2.6.3  Datalog Uplink payload ===
428 428  
429 -7. Modify the **ui_water_leak/CMakeLists.txt**. Open this file, and modify it as shown in image 5.11 (before) and image 5.12 (after).
430 430  
431 -[[image:image-20241121180030-15.png]]
476 +See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]
432 432  
433 - image 5.11 ui_water_leak/CMakeLists.txt before modification
478 +(% style="display:none" %) (%%) (% style="display:none" %)
434 434  
435 -[[image:image-20241121180517-16.png]]
480 +== 2.7 Button ==
436 436  
437 - image 5.12 ui_water_leak/CMakeLists.txt after modification
438 438  
483 +* ACT button
439 439  
440 -8. Modify the **ui_water_leak.h** file. Images 5.13 and 5.14 show the code before modification, while Images 5.15 and 5.16 show the code after modification.
485 +Long press this button PB01 will reset and join network again.
441 441  
442 -[[image:image-20241122094200-23.png]]
487 +[[image:image-20240510161626-17.png||height="192" width="224"]]
443 443  
444 - image 5.13 ui_water_leak.h (1) before modification
489 +* Alarm button
445 445  
446 -[[image:image-20241122094320-24.png||height="852" width="554"]]
491 +Press the button PB01 will immediately uplink data, and alarm is "TRUE".
447 447  
448 - image 5.14 ui_water_leak.h (2) before modification
493 +[[image:image-20240705095149-5.png||height="164" width="162"]](% style="display:none" %)
449 449  
450 -[[image:image-20241122094600-25.png||height="1078" width="554"]]
451 451  
452 - image 5.15 ui_water_leak.h (1) after modification
496 +== 2.8 LED Indicator ==
453 453  
454 -[[image:image-20241122094719-26.png||height="941" width="583"]]
455 455  
456 - image 5.16 ui_water_leak.h (2) before modification
499 +(((
500 +The PB01 has a triple color LED which for easy showing different stage.
501 +)))
457 457  
458 -9. **Modify ui_water_leak.c file.** The image 5.17, 5.18, 5.19 show the code before modification, and the image 5.20, 5.21, 5.22 show the code after modification.
503 +Hold the ACT green light to rest, then the green flashing node restarts, the blue flashing once upon request for network access, and the green constant light for 5 seconds after successful network access
459 459  
460 -_ui_flag_modify( ((lv_obj_t *)(e->user_data)), LV_OBJ_FLAG_HIDDEN, _UI_MODIFY_FLAG_TOGGLE);  This code replaces 4 lines of code in ui_water_leak.c, so it is pasted here for convenience.
505 +(((
506 +(% style="color:#037691" %)**In a normal working state**:
507 +)))
461 461  
462 -[[image:image-20241122102929-27.png||height="619" width="426"]]
509 +* When the node is restarted, hold the ACT (% style="color:green" %)**GREEN**(%%) lights up , then the (% style="color:green" %)**GREEN**(%%) flashing node restarts.The (% style="color:blue" %)**BLUE**(%%) flashing once upon request for network access, and the (% style="color:green" %)**GREEN**(%%) constant light for 5 seconds after successful network access(% style="color:#0000ff" %)**.**
510 +* During OTAA Join:
511 +** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.
512 +** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.
513 +* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.
514 +* Press the alarm button，The (% style="color:red" %)**RED**(%%) flashes until the node receives the ACK from the platform and the (% style="color:blue" %)**BLUE**(%%) light stays 5s.
463 463  
464 - image 5.17 ui_water_leak.c (1) before modification
516 +(((
517 +
518 +)))
465 465  
466 -[[image:image-20241122112838-30.png||height="551" width="628"]]
520 +== 2.9 Buzzer ==
467 467  
468 - image 5.18 ui_water_leak.c (2) before modification
469 469  
470 -[[image:image-20241122110815-29.png||height="725" width="712"]]
523 +The PB01 has** button sound** and** ACK sound** and users can turn on or off both sounds by using [[AT+SOUND>>||anchor="H3.3A0Setbuttonsoundandbuttonalarm"]].
471 471  
472 - image 5.19 ui_water_leak.c (3) before modification
525 +* (% style="color:#4f81bd" %)**Button sound**(%%)** **is the music produced by the node after the alarm button is pressed.
473 473  
474 -[[image:image-20241122113158-31.png||height="872" width="677"]]
527 + Users can use[[ AT+OPTION>>||anchor="H3.4A0Setbuzzermusic2807E429"]] to set different button sounds.
475 475  
476 - image 5.20 ui_water_leak.c (1) after modification
529 +* (% style="color:#4f81bd" %)**ACK sound **(%%)is the notification tone that the node receives ACK.
477 477  
478 -[[image:image-20241122113259-33.png||height="874" width="724"]]
531 += 3.  Configure PB01 via AT command or LoRaWAN downlink =
479 479  
480 - image 5.21 ui_water_leak.c (2) after modification
481 481  
482 -[[image:image-20241122113359-34.png||height="804" width="746"]]
534 +Users can configure PB01 via AT Command or LoRaWAN Downlink.
483 483  
484 - image 5.22 ui_water_leak.c (3) after modification
536 +* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
485 485  
486 -10. **Modify ui_water_leak_events.h file.** The image 5.23 show the code before modification, and the image 5.24 show the code after modification.
538 +* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
487 487  
488 -[[image:image-20241122134113-35.png||height="380" width="421"]]
540 +There are two kinds of commands to configure PB01, they are:
489 489  
490 - image 5.23 ui_water_leak_events_.h before modification
542 +* (% style="color:#4f81bd" %)**General Commands:**
491 491  
492 -[[image:image-20241122134420-37.png||height="201" width="283"]]
544 +These commands are to configure:
493 493  
494 -image 5.24 ui_water_leak_events_.h after modification
546 +* General system settings like: uplink interval.
495 495  
496 -11.** Modify ui_water_leak_events.c file.** The image 5.25 show the code before modification, and the image 5.26 show the code after modification.
548 +* LoRaWAN protocol & radio-related commands.
497 497  
498 -Step1. '#include "ui.h"'~-~->'#include "ui_water_leak.h"'
550 +They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
499 499  
500 -Step2. add code  below in delete_object() function definition.
501 501  
502 - panel_all * panel = find_upper_by_SensorPanel(&arr,((lv_obj_t *)(e->user_data~)~)~);
553 +* (% style="color:#4f81bd" %)**Commands special design for PB01**
503 503  
504 - size_t index = panel->panel_obj_index;
555 +These commands are only valid for PB01, as below:
505 505  
506 - deleteElement(&arr, index);
557 +(% style="display:none" %) (%%)
507 507  
508 -[[image:image-20241122135023-38.png||height="358" width="372"]]
559 +== 3.1  Downlink Command Set ==
509 509  
510 - image 5.25 ui_water_leak_events_.c before modification
511 511  
512 -[[image:image-20241122135258-39.png||height="403" width="559"]]
562 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
563 +|=(% style="width: 130px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 151px; background-color: rgb(79, 129, 189); color: white;" %)**Function**|=(% style="width: 92px; background-color: rgb(79, 129, 189); color: white;" %)**Response**|=(% style="width: 206px; background-color: rgb(79, 129, 189); color: white;" %)**Downlink**
564 +|(% style="width:130px" %)AT+TDC=?|(% style="width:151px" %)(((
565 +
513 513  
514 - image 5.26 ui_water_leak_events_.c after modification
567 +View current TDC time
568 +)))|(% style="width:92px" %)(((
569 +1200000
570 +OK
571 +)))|(% style="width:206px" %)Default 1200000(ms)
572 +|(% style="width:130px" %)AT+TDC=300000|(% style="width:151px" %)Set TDC time|(% style="width:92px" %)OK|(% style="width:206px" %)(((
573 +(((
574 +0X0100012C:
575 +01: fixed command
576 +00012C: 0X00012C=
515 515  
578 +300(seconds)
579 +)))
516 516  
517 -12. **Modify ui_water_leak_style.c file.**
581 +(((
582 +
583 +)))
584 +)))
585 +|(% style="width:130px" %)ATZ|(% style="width:151px" %)Reset node|(% style="width:92px" %) |(% style="width:206px" %)0x04FF
586 +|(% style="width:130px" %)AT+FDR|(% style="width:151px" %)Restore factory settings|(% style="width:92px" %) |(% style="width:206px" %)0X04FE
587 +|(% style="width:130px" %)AT+CFM=?|(% style="width:151px" %)View the current confirmation mode status|(% style="width:92px" %)(((
588 +0,7,0
518 518  
519 -Step1. '#include "../ui.h"'~-~->#include '"../ui_water_leak.h"'
590 +OK
591 +)))|(% style="width:206px" %)Default 0,7,0
592 +|(% style="width:130px" %)AT+CFM=1,7,1|(% style="width:151px" %)(((
593 +Confirmed uplink mode, the maximum number of retries is seven, and uplink fcnt increase by 1 for each retry
594 +)))|(% style="width:92px" %)(((
595 +OK
596 +)))|(% style="width:206px" %)(((
597 +05010701
520 520  
521 - add '#include "../../sort.h"'
599 +05: fixed command
522 522  
523 - add '#include "ui.h"'
601 +01:confirmed uplink
524 524  
525 -[[image:image-20241122141536-41.png||height="361" width="612"]]
603 +07: retry 7 times
526 526  
527 - image 5.27 ui_water_leak_style.c (1) before modification
605 +01: fcnt count plus 1
606 +)))
607 +|(% style="width:130px" %)AT+NJM=?|(% style="width:151px" %)(((
608 +Check the current network connection method
609 +)))|(% style="width:92px" %)(((
610 +1
611 +OK
612 +)))|(% style="width:206px" %)Default 1
613 +|(% style="width:130px" %)AT+NJM=0|(% style="width:151px" %)Change the network connection method to ABP|(% style="width:92px" %)(((
614 +Attention:Take effect after ATZ
615 +OK
616 +)))|(% style="width:206px" %)(((
617 +0X2000: ABP
618 +0x2001: OTAA
619 +20: fixed command
620 +)))
621 +|(% style="width:130px" %)AT+RPL=?|(% style="width:151px" %)View current RPL settings|(% style="width:92px" %)(((
622 +0
623 +OK
624 +)))|(% style="width:206px" %)Default 0
625 +|(% style="width:130px" %)AT+RPL=1|(% style="width:151px" %)set RPL=1    |(% style="width:92px" %)OK|(% style="width:206px" %)(((
626 +0x2101:
627 +21: fixed command
628 +01: for details, check wiki
629 +)))
630 +|(% style="width:130px" %)AT+ADR=?|(% style="width:151px" %)View current ADR status|(% style="width:92px" %)(((
631 +1
632 +OK
633 +)))|(% style="width:206px" %)Default 0
634 +|(% style="width:130px" %)AT+ADR=0|(% style="width:151px" %)Set the ADR state to off|(% style="width:92px" %)OK|(% style="width:206px" %)(((
635 +0x2200: close
636 +0x2201: open
637 +22: fixed command
638 +)))
639 +|(% style="width:130px" %)AT+DR=?|(% style="width:151px" %)View the current DR settings|(% style="width:92px" %)OK|(% style="width:206px" %)
640 +|(% style="width:130px" %)AT+DR=1|(% style="width:151px" %)(((
641 +set DR to 1
642 +It takes effect only when ADR=0
643 +)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
644 +0X22000101:
645 +00: ADR=0
646 +01: DR=1
647 +01: TXP=1
648 +22: fixed command
649 +)))
650 +|(% style="width:130px" %)AT+TXP=?|(% style="width:151px" %)View the current TXP|(% style="width:92px" %)OK|(% style="width:206px" %)
651 +|(% style="width:130px" %)AT+TXP=1|(% style="width:151px" %)(((
652 +set TXP to 1
653 +It takes effect only when ADR=0
654 +)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
655 +0X22000101:
656 +00: ADR=0
657 +01: DR=1
658 +01: TXP=1
659 +22: fixed command
660 +)))
661 +|(% style="width:130px" %)AT+RJTDC=10|(% style="width:151px" %)Set RJTDC time interval|(% style="width:92px" %)OK|(% style="width:206px" %)(((
662 +0X26000A:
663 +26: fixed command
664 +000A: 0X000A=10(min)
665 +for details, check wiki
666 +)))
667 +|(% style="width:130px" %) |(% style="width:151px" %)(((
668 +(((
669 +~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
528 528  
529 -[[image:image-20241122142129-42.png||height="386" width="613"]]
671 +Retrieve stored data for a specified period of time
672 +)))
530 530  
531 - image 5.28 ui_water_leak_style.c (1) after modification
674 +(((
675 +
676 +)))
677 +)))|(% style="width:92px" %) |(% style="width:206px" %)(((
678 +0X3161DE7C7061DE8A800A:
679 +31: fixed command
680 +61DE7C70:0X61DE7C70=2022/1/12 15:00:00
681 +61DE8A80:0X61DE8A80=2022/1/12 16:00:00
682 +0A: 0X0A=10(second)
683 +View details 2.6.2
684 +)))
685 +|(% style="width:130px" %)AT+DDETECT=?|(% style="width:151px" %)View the current DDETECT setting status and time|(% style="width:92px" %)(((
686 +1,1440,2880
687 +OK
688 +)))|(% style="width:206px" %)Default 1,1440,2880(min)
689 +|(% style="width:130px" %)AT+DDETECT=(((
690 +1,1440,2880
691 +)))|(% style="width:151px" %)(((
692 +Set DDETECT setting status and time
693 +((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))
694 +)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
695 +0X320005A0: close
696 +0X320105A0: open
697 +32: fixed command
698 +05A0: 0X05A0=1440(min)
699 +)))
532 532  
701 +== 3.2  Set Password ==
533 533  
534 -Step2. modify 'void ui_ScreenMain_screen_init(void)'~-~->'panel_with_type create_water_leak(uint8_t index)'
535 535  
536 - delete code as shown in image 5.29
704 +Feature: Set device password, max 9 digits.
537 537  
538 -[[image:image-20241122145620-44.png||height="757" width="671"]]
706 +(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
539 539  
540 - image 5.29 ui_water_leak_style.c (2)
708 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
709 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
710 +|(% style="width:155px" %)AT+PWORD=?|(% style="width:124px" %)Show password|(% style="width:86px" %)(((
711 +123456
712 +OK
713 +)))
714 +|(% style="width:155px" %)AT+PWORD=999999|(% style="width:124px" %)Set password|(% style="width:86px" %)OK
541 541  
716 +(% style="color:#4f81bd" %)**Downlink Command:**
542 542  
543 -Step3. The image 5.30, 5.31 show the change.
718 +No downlink command for this feature.
544 544  
545 -[[image:image-20241122152026-45.png||height="277" width="828"]]
546 546  
547 - image 5.30 ui_water_leak_style.c (3) before modification
721 +== 3.3  Set button sound and ACK sound ==
548 548  
549 -[[image:image-20241122152542-46.png||height="293" width="830"]]
550 550  
551 - image 5.31 ui_water_leak_style.c (3) after modification
724 +Feature: Turn on/off button sound and ACK alarm.
552 552  
726 +(% style="color:#4f81bd" %)**AT Command: AT+SOUND**
553 553  
554 -Step4. Copy partly the code in ui_water_leak.c, paste at extra_lib/sort.h(The process is shown in image 5.32, 5.33).
728 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
729 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
730 +|(% style="width:155px" %)(((
731 +AT+SOUND=?
732 +)))|(% style="width:124px" %)Get the current status of button sound and ACK sound|(% style="width:86px" %)(((
733 +1,1
734 +OK
735 +)))
736 +|(% style="width:155px" %)(((
737 +AT+SOUND=0,1
738 +)))|(% style="width:124px" %)Turn off the button sound and turn on ACK sound|(% style="width:86px" %)OK
555 555  
556 -[[image:image-20241122153958-47.png]]
740 +(% style="color:#4f81bd" %)**Downlink Command: 0xA1 **
557 557  
558 - image 5.32 ui_water_leak_style.c (4)
742 +Format: Command Code (0xA1) followed by 2 bytes mode value.
559 559  
744 +The first byte after 0XA1 sets the button sound, and the second byte after 0XA1 sets the ACK sound.** (0: off, 1: on)**
560 560  
561 -[[image:image-20241122154755-49.png||height="864" width="513"]]
746 +* **Example: **Downlink Payload: A10001  ~/~/ Set AT+SOUND=0,1  Turn off the button sound and turn on ACK sound.
562 562  
563 - image 5.33 ui_water_leak_style.c (4)
748 +== 3.4  Set buzzer music type(0~~4) ==
564 564  
565 565  
566 -Step5. Delete event function in code which was just pasted in extra_lib/sort.h(The process is shown in image 5.34).
751 +Feature: Set different alarm key response sounds.There are five different types of button music.
567 567  
568 -[[image:image-20241122155650-50.png||height="922" width="513"]]
753 +(% style="color:#4f81bd" %)**AT Command: AT+OPTION**
569 569  
570 - image 5.34 ui_water_leak_style.c (5)
755 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
756 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
757 +|(% style="width:155px" %)(((
758 +AT+OPTION=?
759 +)))|(% style="width:124px" %)(((
760 +Get the buzzer music type
761 +)))|(% style="width:86px" %)(((
762 +3
571 571  
764 +OK
765 +)))
766 +|(% style="width:155px" %)AT+OPTION=1|(% style="width:124px" %)Set the buzzer music to type 1|(% style="width:86px" %)OK
572 572  
573 -Step6. Add some lines of code in extra_lib/sort.h as shown in image 5.35.
768 +(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
574 574  
575 -[[image:image-20241122161934-51.png]]
770 +Format: Command Code (0xA3) followed by 1 byte mode value.
576 576  
577 - image 5.35
772 +* **Example: **Downlink Payload: A300  ~/~/ Set AT+OPTION=0  Set the buzzer music to type 0.
578 578  
774 +== 3.5  Set Valid Push Time ==
579 579  
580 -Step7. Add a line of code in extra_lib/sort.h as shown in image 5.36.
581 581  
582 -[[image:image-20241122162852-53.png||height="330" width="529"]]
777 +Feature: Set the holding time for pressing the alarm button to avoid miscontact. Values range from** 0 ~~1000ms**.
583 583  
584 - image 5.37
779 +(% style="color:#4f81bd" %)**AT Command: AT+STIME**
585 585  
781 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
782 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
783 +|(% style="width:155px" %)(((
784 +AT+STIME=?
785 +)))|(% style="width:124px" %)(((
786 +Get the button sound time
787 +)))|(% style="width:86px" %)(((
788 +0
789 +OK
790 +)))
791 +|(% style="width:155px" %)(((
792 +AT+STIME=1000
793 +)))|(% style="width:124px" %)Set the button sound time to 1000**ms**|(% style="width:86px" %)OK
586 586  
587 -Step8. Add some code in ui_water_leak_style.c as shown in image 5.38 from line534 to line 576 in detail.
795 +(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
588 588  
589 -panel_with_type union_sensor;
797 +Format: Command Code (0xA2) followed by 2 bytes mode value.
590 590  
591 -union_sensor.panel_type = WATER_LEAK_TYPE;
799 +* **Example: **Downlink Payload: A203E8  ~/~/ Set AT+STIME=1000  
592 592  
593 -......
801 +**~ Explain: **Hold the alarm button for 10 seconds before the node will send the alarm packet.
594 594  
595 -lv_obj_set_x(union_sensor.panel_union.door.ui_PanelSensorDoor, x_by_index(index));
596 596  
597 -lv_obj_set_y(union_sensor.panel_union.door.ui_PanelSensorDoor, y_by_index(index));
804 +
598 598  
599 -return union_sensor;
600 -
601 -[[image:image-20250122173546-6.png||height="777" width="922"]]
602 -
603 - image 5.38
604 -
605 -
606 -13. Rest midification in sort.h file.
607 -
608 -In image 5.39 as below, we can see "WATER_LEAK_TYPE" at line 24 and water leak switch status definition at line 32,33, and these are what we need to add in sort.
609 -
610 -[[image:image-20250122170230-1.png||height="580" width="513"]]
611 -
612 - image 5.39 sort.h
613 -
614 -13. **Modify sort.c file.**
615 -
616 -Add a line of code ~-~-'#include "ui_water_leak.h"' as shown in image 5.39 line 26.
617 -
618 -[[image:image-20250122171910-5.png||height="524" width="510"]]
619 -
620 - image 5.40 sort.c (1)
621 -
622 -There are still some changes need to be done in sort.c, and omit here for the moment.
623 -
624 -
625 -
626 626  = 6. FAQ =
627 627  
628 -== 6.1 ==
808 +== 6.1 ==
629 629  
630 630  
631 631  = 7. Order Info =
... ... @@ -632,13 +632,12 @@
632 632  
633 633  == 7.1  Part Number ==
634 634  
635 -
636 636  Part Number: (% style="color:#4472c4" %)LTS5
637 637  
817 +
638 638  
639 639  == 7.2  Packing Info ==
640 640  
641 -
642 642  **Package Includes**:
643 643  
644 644  * LTS5 HMI Touch Screen
... ... @@ -645,19 +645,20 @@
645 645  * 5V,2A DC Power Adapter.
646 646  * USB Type C Program Cable
647 647  
827 +
648 648  = 8. Support =
649 649  
650 -
651 651  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
652 652  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
653 653  
833 +
654 654  = 9.  Reference material =
655 655  
656 -
657 657  * Datasheet
658 -* Source Code: [[dragino/LoRa-HMI-Touch-Screen: Open Source LoRa / LoRaWAN HMI Touch Screen Project>>url:https://github.com/dragino/LoRa-HMI-Touch-Screen/tree/main]]
837 +* Source Code
659 659  * Mechinical
660 660  
840 +
661 661  = 10. FCC Warning =
662 662  
663 663  
1727229396732-319.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -197.2 KB
Content
1727229550717-684.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -113.9 KB
Content
1727229582471-566.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -73.6 KB
Content
1727229618724-758.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -118.7 KB
Content
1727229653254-680.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -116.2 KB
Content
1727229682537-381.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.5 KB
Content
1727229715361-392.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -75.2 KB
Content
1727229740592-843.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -87.3 KB
Content
1727229760857-521.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -24.7 KB
Content
1727229798126-306.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -53.6 KB
Content
1727229821582-258.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -76.1 KB
Content
1727229845835-509.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
1727229892636-154.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -192.0 KB
Content
1727229926561-300.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -178.0 KB
Content
1727229955611-607.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -100.4 KB
Content
1727229990795-405.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -383.6 KB
Content
1727230012478-930.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -477.1 KB
Content
1727231038705-173.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -94.6 KB
Content
1727233636007-933.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -114.8 KB
Content
1727484665746-713.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -94.9 KB
Content
1727485118799-984.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -11.8 KB
Content
1727485251053-655.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
1727485480434-713.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -24.7 KB
Content
1727485933579-550.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
1727485953726-175.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -91.6 KB
Content
1727486567182-334.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
1727486578489-774.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -66.0 KB
Content
1727487368023-281.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -28.5 KB
Content
1727488067077-684.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -604.7 KB
Content
1727488099947-341.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -877.7 KB
Content
1727488108117-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -877.7 KB
Content
1727488157579-949.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -877.7 KB
Content
Screenshot 2024-12-24 134818.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -15.0 KB
Content
Screenshot 2024-12-24 134937.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 KB
Content
Screenshot 2024-12-24 140459.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -12.0 KB
Content
Screenshot 2024-12-24 144005.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -28.0 KB
Content
image-20240916101737-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -156.7 KB
Content
image-20240925110638-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -262.7 KB
Content
image-20240928090825-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -30.2 KB
Content
image-20240928103357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -153.7 KB
Content
image-20240928103506-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -197.7 KB
Content
image-20240928105309-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -80.2 KB
Content
image-20240928110211-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -228.0 KB
Content
image-20240928111412-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -150.9 KB
Content
image-20240928111654-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -105.4 KB
Content
image-20240928112001-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20240928113424-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -50.8 KB
Content
image-20240928114139-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20240928144830-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20241121113445-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -250.0 KB
Content
image-20241121120222-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -44.8 KB
Content
image-20241121120830-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20241121141120-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -41.7 KB
Content
image-20241121141315-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -29.4 KB
Content
image-20241121141329-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -29.4 KB
Content
image-20241121142925-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -14.8 KB
Content
image-20241121145915-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -61.0 KB
Content
image-20241121150911-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -73.0 KB
Content
image-20241121151934-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20241121171629-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -16.9 KB
Content
image-20241121171901-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -17.2 KB
Content
image-20241121172714-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -26.4 KB
Content
image-20241121172908-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -27.1 KB
Content
image-20241121180030-15.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -27.7 KB
Content
image-20241121180517-16.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -26.5 KB
Content
image-20241121181957-17.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -59.3 KB
Content
image-20241121182239-18.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -71.3 KB
Content
image-20241122092239-19.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -270.9 KB
Content
image-20241122092655-20.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -251.6 KB
Content
image-20241122093445-21.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -128.9 KB
Content
image-20241122093601-22.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -120.0 KB
Content
image-20241122094200-23.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -289.2 KB
Content
image-20241122094320-24.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -182.4 KB
Content
image-20241122094600-25.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -136.0 KB
Content
image-20241122094719-26.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -129.5 KB
Content
image-20241122102929-27.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -219.9 KB
Content
image-20241122104344-28.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -257.1 KB
Content
image-20241122110815-29.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -246.1 KB
Content
image-20241122112838-30.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -263.9 KB
Content
image-20241122113158-31.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -133.7 KB
Content
image-20241122113252-32.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -152.3 KB
Content
image-20241122113259-33.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -152.3 KB
Content
image-20241122113359-34.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -126.5 KB
Content
image-20241122134113-35.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -69.3 KB
Content
image-20241122134412-36.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20241122134420-37.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20241122135023-38.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20241122135258-39.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -40.3 KB
Content
image-20241122141526-40.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -78.8 KB
Content
image-20241122141536-41.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -78.8 KB
Content
image-20241122142129-42.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -85.1 KB
Content
image-20241122143105-43.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -60.2 KB
Content
image-20241122145620-44.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -394.0 KB
Content
image-20241122152026-45.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -201.6 KB
Content
image-20241122152542-46.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -95.3 KB
Content
image-20241122153958-47.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -241.1 KB
Content
image-20241122154745-48.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20241122154755-49.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20241122155650-50.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20241122161934-51.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -230.3 KB
Content
image-20241122162612-52.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -58.7 KB
Content
image-20241122162852-53.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -125.5 KB
Content
image-20241122171211-54.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -173.3 KB
Content
image-20241122173706-55.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -37.6 KB
Content
image-20241122173718-56.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -37.6 KB
Content
image-20241226135550-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -293.3 KB
Content
image-20250122170230-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -77.3 KB
Content
image-20250122171809-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.1 KB
Content
image-20250122171825-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.1 KB
Content
image-20250122171832-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.1 KB
Content
image-20250122171910-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.1 KB
Content
image-20250122173546-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -200.4 KB
Content
squalreline-trial.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
squareline-studio-launcher-screen.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -203.4 KB
Content
squareline.io_downloads.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 MB
Content