Skip to Content
Last modified by BoYang Xie on 2025/07/24 16:47
From version 133.2
edited by Xiaoling
on 2024/12/26 14:00
Change comment: There is no comment for this version
To version 4.1
edited by Edwin Chen
on 2024/09/15 23:32
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,13 +1,9 @@
1 -
1 +
2 +[[image:image-20240915231842-1.png]]
2 2  
3 -(% style="text-align:center" %)
4 -[[image:image-20241226135550-1.png]]
5 5  
6 -
7 -
8 -
9 9  (% _mstvisible="1" %)
10 -(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents:**
6 +(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -20,77 +20,59 @@
20 20  
21 21  = 1.  Introduction =
22 22  
23 -== 1.1  What is the LTS5 LoRa HMI Touch Screen? ==
19 +== 1.1  What is LTS5 LoRa HMI touch screen ==
24 24  
21 +LTS5 is a (% style="color:blue" %)LoRa / LoRaWAN HMI Touch Screen(%%) designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.
25 25  
26 -The LTS5 is a (% style="color:blue" %)**LoRa / LoRaWAN HMI Touch Screen**(%%) designed for displaying information in IoT projects. It features a **5.0-inch HMI touch screen** and supports **Wi-Fi**, **Bluetooth**, and **LoRa** wireless protocols.
23 +LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.
27 27  
28 -The LTS5 is an open-source software project powered by an **ESP32 MCU** and a **Dragino LA66 LoRa** module. The extensive development resources available for ESP32 can significantly reduce development time.
25 +The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the UI.
29 29  
30 -The LTS5's HMI touch screen supports **drag-and-drop** design, allowing developers to use SquareLine to easily customize the display UI for various applications.
31 31  
32 -The LA66 LoRa module can be programmed to support either private LoRa protocols or the LoRaWAN protocol.
33 -
34 34  == 1.2  Features ==
35 35  
36 36  
37 -* ESP32-WROOM MCU: 8MB RAM & 16MB ROM
38 -* Dragino LA66 LoRa Module
39 -* Support Private LoRa protocol or LoRaWAN protocol
40 -* Support WiFi & BLE wireless protocol
41 -* 5.0" HMI touch screen
42 -* Support LVGL case. SquareLine program.
43 -* Support RS485 Interface
44 -* Open Source Project
45 45  * Wall Attachable.
46 -* 5V DC power
32 +* LoRaWAN v1.0.3 Class A protocol.
33 +* 1 x push button. Different Color available.
34 +* Built-in Temperature & Humidity sensor
35 +* Built-in speaker
36 +* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
37 +* AT Commands to change parameters
38 +* Remote configure parameters via LoRaWAN Downlink
39 +* Firmware upgradable via program port
40 +* Support 2 x AAA LR03 batteries.
47 47  * IP Rating: IP52
48 48  
49 -== 1.3  Specifications ==
43 +== 1.3  Specification ==
50 50  
51 51  
52 -**LoRa**:
46 +**Built-in Temperature Sensor:**
53 53  
54 -* Frequency Range: 870 MHz ~~ 960 MHz
55 -* TCXO crystal to ensure RF performance on low temperature
56 -* Maximum Power +22 dBm constant RF output
57 -* High sensitivity: -148 dBm
58 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
59 -* LoRa Rx current: <9 mA
48 +* Resolution: 0.01 °C
49 +* Accuracy Tolerance: Typ ±0.2 °C
50 +* Long Term Drift: < 0.03 °C/yr
51 +* Operating Range: -10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
60 60  
61 -**WiFi:**
53 +**Built-in Humidity Sensor:**
62 62  
63 -* 802.11b/g/n
64 -* Up to 150 Mbps data rate in 802.11n mode
65 -* Support A-MPDU and A-MSDU aggregation
66 -* zero point four μ S protection interval
67 -* Working channel center frequency range: 2412~~2484 MHz
55 +* Resolution: 0.01 %RH
56 +* Accuracy Tolerance: Typ ±1.8 %RH
57 +* Long Term Drift: < 0.2% RH/yr
58 +* Operating Range: 0 ~~ 99.0 %RH(no Dew)
68 68  
69 -**Bluetooth:**
70 -
71 -* Bluetooth V4.2 BR/EDR and Bluetooth LE standard
72 -* Class-1, Class-2, and Class-3 transmitters.
73 -* AFH
74 -* CVSD and SBC
75 -
76 -**Display:**
77 -
78 -* 5.0 Inch , 800 x 480
79 -* IPS Capacitive Touch SCreen
80 -* RGB color.
81 -* Display Area: 120.7*75.80 mm
82 -
83 83  == 1.4  Power Consumption ==
84 84  
85 85  
86 -* External 5V DC power adapter
63 +PB01 : Idle: 5uA, Transmit: max 110mA
87 87  
65 +
88 88  == 1.5  Storage & Operation Temperature ==
89 89  
90 90  
91 -* Operation Temperature: -20 ~~ 70°C  (No Dew)
92 -* Storage Temperature: -30 ~~ 70°C  (No Dew)
69 +-10 ~~ 50 °C  or -40 ~~ 60 °C (depends on battery type, see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])
93 93  
71 +
94 94  == 1.6  Applications ==
95 95  
96 96  
... ... @@ -101,531 +101,1036 @@
101 101  * Smart Cities
102 102  * Smart Factory
103 103  
104 -= 2.  Getting Started with 'Hello World' =
82 += 2.  Operation Mode =
105 105  
106 -== 2.1  About this demo ==
84 +== 2.1  How it work? ==
107 107  
108 108  
109 -This getting started example demonstrates how to design and deploy a simple display UI for the LTS5 device. The example includes:
87 +Each PB01 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use PB01 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if PB01 is under this LoRaWAN network coverage, PB01 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.
110 110  
111 -* Creating a basic UI with a single button.
112 -* Implementing functionality to navigate the Web UI to a new page when the button is clicked.
113 -* Uploading the UI to the LTS5 device.
114 114  
115 -By completing this demo, you will gain foundational knowledge for customizing the LTS5 interface and building more advanced IoT applications.
90 +== 2.2  How to Activate PB01? ==
116 116  
117 117  
118 -== 2.2  Install Software Running Environment ==
93 +(% style="color:red" %)** 1.  Open enclosure from below position.**
119 119  
95 +[[image:image-20220621093835-1.png]]
120 120  
121 -The **ESP MCU** supports development with **ESP-IDF**, **Arduino**, or **MicroPython**. We use **ESP-IDF** for compilation and **Visual Studio Code (VS Code)** as the development environment for this project.
122 122  
98 +(% style="color:red" %)** 2.  Insert 2 x AAA LR03 batteries and the node is activated.**
123 123  
124 -=== 2.2.1 Install VS Code and ESP-IDF extension ===
100 +[[image:image-20220621093835-2.png]]
125 125  
126 126  
127 -First, download and install **VS Code** for your operating system from the Visual Studio Code website: [[Visual Studio Code - Mac, Linux, Windows>>https://code.visualstudio.com/download]].
103 +(% style="color:red" %)** 3. Under the above conditions, users can also reactivate the node by long pressing the ACT button.**
128 128  
129 -Next, install the **ESP-IDF** extension within **VS Code**. Detailed steps for this process are shown in Image 1.
105 +[[image:image-20220621093835-3.png]]
130 130  
131 131  
132 -[[image:image-20240928110211-5.png||height="508" width="866"]]
108 +User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of PB01.
133 133  
134 - Image 1: ESP-IDF extension install
135 135  
136 -Links for reference: [[Install ESP32 ESP-IDF on Windows and Integrate with VS code (esp32tutorials.com)>>url:https://esp32tutorials.com/install-esp32-esp-idf-windows-integrate-vs-code/#:~~:text=In%20this%20tutorial,%20we%20will%20show%20you%20how%20to%20install]]
111 +== 2.3  Example to join LoRaWAN network ==
137 137  
138 138  
139 -=== 2.2.2 Install SquareLine Studio ===
114 +This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.
140 140  
116 +(% _mstvisible="1" class="wikigeneratedid" %)
117 +Assume the LPS8v2 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the PB01 device in TTN V3 portal. 
141 141  
142 -Download and install the latest version of [[SquareLine Studio>>https://squareline.io/downloads#lastRelease]] on your computer. It supports Windows, Linux, and Mac OS. The software version we are using here is 1.5.0. See the image below.
119 +[[image:image-20240705094824-4.png]]
143 143  
144 -[[image:squareline.io_downloads.png||height="888" width="1294"]]
121 +(% style="color:blue" %)**Step 1**(%%):  Create a device in TTN V3 with the OTAA keys from PB01.
145 145  
123 +Each PB01 is shipped with a sticker with the default DEV EUI as below:
146 146  
147 -After installation, you can use SquareLine Studio with a **PERSONAL license plan**. Click **LOG IN** and create a free account using your email address. Then activate your PERSONAL license plan for free. You don’t need to provide any credit card information. However, the PERSONAL license plan has the following limitations:
125 +[[image:image-20230426083617-1.png||height="294" width="633"]]
148 148  
149 -* Max. 10 screens
150 -* Max. 150 widgets
151 -* Max. 5 global colors
152 -* Max. 2 themes
153 -* Max. 1 component
154 154  
155 -== 2.3 Simple usage of SquareLine Studio and exporting UI code ==
128 +Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:
156 156  
130 +Create application.
157 157  
158 -Start the SquareLine Studio. The **launcher screen** appears as shown in the below image. You can create a new project by clicking **Create** in the top menu. Then select the **Desktop** tab. Select the development platform, **Eclipse with  SDL for development on PC**.
132 +choose to create the device manually.
159 159  
160 -* In the **PROJECT SETTINGS**, select **LVGL version **as **8.3.11** and **Resolution** as **800** x **480**.
161 -* Select the **CREATE **button to create the new project with the selected settings.
134 +Add JoinEUI(AppEUI), DevEUI, AppKey.(% style="display:none" %)
162 162  
163 -[[image:squareline-studio-launcher-screen.png||height="752" width="1415"]]
136 +[[image:image-20240507142116-1.png||height="410" width="1138"]](% style="display:none" %) (%%)
137 +
164 164  
139 +[[image:image-20240507142157-2.png||height="559" width="1147"]]
165 165  
166 -Next, you need to configure some additional settings for this project. To do so, select** File  -> Project Settings** as shown in the image below.
141 +[[image:image-20240507142401-3.png||height="693" width="1202"]]
167 167  
168 -[[image:1727229582471-566.png]]
143 +[[image:image-20240507142651-4.png||height="760" width="1190"]]
169 169  
145 +**Default mode OTAA**(% style="display:none" %)
170 170  
171 -In the **PROJECT SETTINGS** dialog box, configure/modify the project settings as shown in the image below.
172 172  
173 -* **UI Files Export Root**: Select a folder on your computer to store the UI files.
174 -* **LVGL Include Path**: Set this to **lvgl.h**
175 -* Click on the **APPLY CHANGES** button.
148 +(% style="color:blue" %)**Step 2**(%%):  Use ACT button to activate PB01 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
176 176  
177 -[[image:image-20240928105309-4.png||height="526" width="556"]]
150 +[[image:image-20240507143104-5.png||height="434" width="1398"]]
178 178  
179 179  
180 -Now you can start building the user interface. Follow the steps below:
153 +== 2.4  Uplink Payload ==
181 181  
182 182  
183 -=== **Add widgets** ===
156 +Uplink payloads include two types: Valid Sensor Value and other status / control command.
184 184  
158 +* Valid Sensor Value: Use FPORT=2
159 +* Other control command: Use FPORT other than 2.
185 185  
186 -To add a widget, navigate to the **Widgets** panel, and then click on the widget you want to add to the screen. You can reposition the widgets in the screen area by clicking and dragging them. Now add a **Label**, **Button**, and **Image** as shown in the image below. The added widgets are also displayed in the **Hierarchy **panel.
161 +=== 2.4.1  Uplink FPORT~=5, Device Status ===
187 187  
188 -[[image:image-20240928111412-6.png||height="526" width="864"]]
189 189  
164 +Users can  get the Device Status uplink through the downlink command:
190 190  
191 -Then click the **Screen **widget to add the second screen. After adding the second screen, it will appear in the Screens panel as **Screen2**.
166 +(% style="color:#4472c4" %)**Downlink:  **(%%)**0x2601**
192 192  
193 -[[image:Screenshot 2024-12-24 140459.png||height="278" width="290"]]
168 +Uplink the device configures with FPORT=5.
194 194  
195 -=== **Modify widget properties** ===
170 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:370px" %)
171 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**Size(bytes)(% style="display:none" %) (%%)**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**
172 +|(% style="width:99px" %)Value|(% style="width:62px" %)Sensor Model|(% style="width:80px" %)Firmware Version|(% style="width:82px" %)Frequency Band|(% style="width:85px" %)Sub-band|(% style="width:46px" %)BAT
196 196  
174 +[[image:image-20240507152130-12.png||height="469" width="1366"]](% style="display:none" %)
197 197  
198 -The area for modifying widgets is called the **Inspector** panel. The Inspector panel consists of four sections: **COMPONENT**, **<WIDGET>**, **STYLE SETTINGS**, and **EVENTS**, as shown in the image below. The second section allows you to adjust a widget's layout, size, position, alignment, flags, states, and more. When you select a widget on the screen, the name of this section changes to match the name of the selected widget.
176 +Example Payload (FPort=5):  [[image:image-20240507152254-13.png||height="26" width="130"]]
199 199  
200 -[[image:1727485118799-984.png]]
201 201  
179 +(% style="color:#4472c4" %)**Sensor Model**(%%): For PB01, this value is 0x35.
202 202  
203 -==== **Changing the Button properties** ====
181 +(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.
204 204  
183 +(% style="color:#4472c4" %)**Frequency Band**:
205 205  
206 -Click the **Button **you have added to the screen. Under the **Layout** you can change the button's position and size. Use the following settings:
185 +*0x01: EU868
207 207  
208 -* **Flex Flow**: No Layout
209 -* **Transform**:
210 -** **X**: 331 px
211 -** **Y**: 203 px
212 -** **Width**: 100 px
213 -** **Height**: 50 px
214 -** **Align**: CENTER
187 +*0x02: US915
215 215  
216 -[[image:1727485251053-655.png]]
189 +*0x03: IN865
217 217  
191 +*0x04: AU915
218 218  
219 -Next, add a click event to the button. When the button is clicked, an event should trigger to change the current screen (Screen1) to a new screen (Screen2) with a fade effect and the transition from Screen1 to Screen2 should take 500ms.
193 +*0x05: KZ865
220 220  
221 -* Click **ADD EVENT** button. A new section will appear to configure this event.
195 +*0x06: RU864
222 222  
223 -[[image:Screenshot 2024-12-24 134937.png||height="80" width="290"]]
197 +*0x07: AS923
224 224  
225 -* Select **CLICKED** from the dropdown under **Trigger**. Choose **CHANGE SCREEN** under **Action**, then click the **ADD** button. A new section will appear to configure the action.
199 +*0x08: AS923-1
226 226  
227 -[[image:Screenshot 2024-12-24 134818.png||height="222" width="290"]]
201 +*0x09: AS923-2
228 228  
229 -* Select **Screen2** under **Screen to**. Select **FADE ON** from **Fade mode**. The default value **500** means the transition takes 500 milliseconds to appear the Screen2.
230 -* Finally, click the **ADD** button.
203 +*0x0a: AS923-3
231 231  
232 -[[image:1727485480434-713.png||height="395" width="290"]]
233 233  
234 - Image 8: Add an event for the button
206 +(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
235 235  
208 +(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for PB01.
236 236  
237 -==== **Changing the label properties** ====
210 +(% style="color:#4472c4" %)**Ex1**(%%): 0x0C DE = 3294mV
238 238  
239 239  
240 -Click the Label you have added to the screen. Under the **Label** section, type "**Click for Detail**" in the **Text** textbox.
213 +=== 2.4.2  Uplink FPORT~=2, Real time sensor value ===
241 241  
242 -[[image:image-20240928090825-1.png||height="327" width="391"]]
243 243  
216 +PB01 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].
244 244  
245 -Once you enter the text, it will immediately appear on the label.
218 +Uplink uses FPORT=2 and every 20 minutes send one uplink by default.
246 246  
220 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460px" %)
221 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
222 +**Size(bytes)**
223 +)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)2|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
224 +**1**
225 +)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
226 +**1**
227 +)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)(((
228 +**2**
229 +)))|=(% style="width: 40px;background-color:#4F81BD;color:white" %)(((
230 +**2**
231 +)))
232 +|(% style="width:97px" %)(((
233 +Value
234 +)))|(% style="width:39px" %)Battery|(% style="width:39px" %)(((
235 +Sound_ACK
247 247  
248 -==== **Changing image properties** ====
237 +&Sound_key
238 +)))|(% style="width:100px" %)(((
239 +(((
240 +Alarm
241 +)))
242 +)))|(% style="width:77px" %)(((
243 +(((
244 +Temperature
245 +)))
246 +)))|(% style="width:47px" %)(((
247 +Humidity
248 +)))
249 249  
250 +Example in TTN.
250 250  
251 -To use the **Image **widget, you should first add an image to your project. The image format must be PNG, and its resolution should not exceed 800x480 pixels. There are two ways to add an image file.
252 +[[image:image-20240507150155-11.png||height="549" width="1261"]]
252 252  
253 -One way is to move your image into the folder "…/squareline project/assets/", as shown in the image below.
254 +Example Payload (FPort=2):  (% style="background-color:yellow" %)**0C EA 03 01 01 11 02 A8**
254 254  
255 -[[image:image-20240928113424-9.png||height="355" width="505"]]
256 +==== (% style="color:blue" %)**Battery:**(%%) ====
256 256  
258 +Check the battery voltage.
257 257  
258 -The other way is to click the "**ADD FILE INTO ASSETS**" button, then select an image from your computer to import. After adding, you can see the image in the "**assets**" panel in SquareLine Studio, as shown in the image below.
260 +* Ex1: 0x0CEA = 3306mV
261 +* Ex2: 0x0D08 = 3336mV
259 259  
260 -[[image:image-20240928114139-10.png||height="559" width="810"]]
263 +==== (% style="color:blue" %)**Sound_ACK & Sound_key:**(%%) ====
261 261  
265 +Key sound and ACK sound are enabled by default.
262 262  
263 -==== **The relationship between widgets** ====
267 +* Example1: 0x03
264 264  
269 + Sound_ACK: (03>>1) & 0x01=1, OPEN.
265 265  
266 -Widgets commonly have two types of relationships: **parallel** and **parent-child**.
271 +**~ ** Sound_key:  03 & 0x01=1, OPEN.
267 267  
268 -* In a **parallel relationship**, widgets' positions are determined relative to a shared reference object.
269 -* In a **parent-child relationship**, any part of the child object outside the parent's boundaries is hidden by default. To make the child object fully visible, you must adjust its position to fit within the parent's range.
273 +* Example2: 0x01
270 270  
271 -[[image:1727486567182-334.png||height="318" width="278"]]
275 + Sound_ACK: (01>>1) & 0x01=0, CLOSE.
272 272  
277 +**~ ** Sound_key:  01 & 0x01=1, OPEN.
273 273  
274 -Move the label, **Label1** to make it a child of **Button1** as shown in the image below.
275 275  
276 -[[image:image-20240928112001-8.png||height="431" width="796"]]
280 +==== (% style="color:blue" %)**Alarm:**(%%) ====
277 277  
282 +Key alarm.
278 278  
279 -Then set the **X** and **Y** position of the label to **0** as shown in the image below. The label will appear on the button. If you move the button on the screen, the label will move along with it as part of the button.
284 +* Ex1: 0x01 & 0x01=1, TRUE.
285 +* Ex2: 0x00 & 0x01=0, FALSE.
280 280  
281 -[[image:Screenshot 2024-12-24 144005.png||height="360" width="290"]]
287 +==== (% style="color:blue" %)**Temperature:**(%%) ====
282 282  
289 +* Example1:  0x0111/10=27.3℃
290 +* Example2:  (0xFF0D-65536)/10=-24.3℃
283 283  
284 -==== **Preview the screen** ====
292 +If payload is: FF0D :  (FF0D & 8000 == 1) , temp = (FF0D - 65536)/100 =-24.3℃
285 285  
294 +（FF0D & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
286 286  
287 -You can test the result by clicking on the **PLAY** button as shown in the image below. The screen will change into play mode.
288 288  
289 -[[image:1727487368023-281.png]]
297 +==== (% style="color:blue" %)**Humidity:**(%%) ====
290 290  
299 +* Humidity:    0x02A8/10=68.0%
291 291  
292 -For more information, please visit the official link: [[SquareLine Studio 1.4.2 Documentation ~| SquareLine Studio>>url:https://docs.squareline.io/docs/squareline/]].
301 +=== 2.4.3  Uplink FPORT~=3, Datalog sensor value ===
293 293  
294 294  
295 -== 2.4 Integrate UI Code to ESP-IDF Project ==
304 +PB01 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.
296 296  
306 +[[image:image-20240510144912-1.png||height="471" width="1178"]](% style="display:none" %)
297 297  
298 -To integrate, first export the UI code, then make some modifications, and finally relocate the UI code to a specific position within the project.
299 299  
300 -[[image:1727229798126-306.png]]
309 +* Each data entry is 11 bytes, to save airtime and battery, PB01 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)
301 301  
302 - image 15 export UI file
311 +For example, in US915 band, the max payload for different DR is:
303 303  
304 -[[image:1727229821582-258.png||height="333" width="662"]]
313 +1. **DR0**: max is 11 bytes so one entry of data
314 +1. **DR1**: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
315 +1. **DR2**: total payload includes 11 entries of data
316 +1. **DR3**: total payload includes 22 entries of data.
305 305  
306 - image 16 exported UI file
318 +(% style="color:red" %)**Notice: PB01 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**
307 307  
308 -Create a empty directory entitled "ui" in path "basic_prj/app_components/ui/", and then copy all UI code exported to this directory.
320 +See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].
309 309  
310 -[[image:image-20240928144830-11.png]]
322 +(% style="display:none" %) (%%)
311 311  
312 - image 17 open CMakeLists.txt
324 +=== 2.4.4  Decoder in TTN V3 ===
313 313  
314 -[[image:1727229892636-154.png||height="521" width="407"]]
315 315  
316 - image 18 modify CMakeLists.txt
327 +In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.
317 317  
329 +In TTN , add formatter as below:
318 318  
319 -The last step of integrating is adding two lines of code in main.c file.
331 +[[image:image-20240507162814-16.png||height="778" width="1135"]]
320 320  
321 -[[image:1727229926561-300.png]]
333 +(((
334 +Please check the decoder from this link:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
335 +)))
322 322  
323 - image 19 add "ui.h"
337 +(((
338 +
339 +)))
324 324  
325 -[[image:1727229955611-607.png]]
341 +== 2.5 Show data on Datacake ==
326 326  
327 - image 20 add "ui_init()"
328 328  
344 +(((
345 +Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
346 +)))
329 329  
330 -== 2.5 Brief introduction of hello world project ==
348 +(((
349 +
350 +)))
331 331  
352 +(((
353 +(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the LoRaWAN network.
354 +)))
332 332  
333 -The project consists of two screens. The first screen displays the company's logo, the project name, and a button to navigate to the next screen. The second screen presents some information about this HMI screen product through an image and includes a button to return to the previous screen.
356 +(((
357 +(% style="color:blue" %)**Step 2**(%%):  Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
358 +)))
334 334  
360 +(((
361 +~1. Add Datacake:
362 +)))
335 335  
336 -== 2.6 Test Result ==
364 +(((
365 +2. Select default key as Access Key:
366 +)))
337 337  
368 +(((
369 +3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add PB01:
370 +)))
338 338  
339 -By pressing the button lying bottom right, the screen can switch to another as expected. This indicates that the UI file has been successfully integrated into the project and is now effective.
372 +(((
373 + Please refer to the figure below.
374 +)))
340 340  
341 -[[image:1727488067077-684.png||height="402" width="574"]]
376 +[[image:image-20240510150924-2.png||height="612" width="1186"]]
342 342  
343 - image 21 screen1
344 344  
345 -[[image:1727488157579-949.png||height="397" width="572"]]
379 +Log in to DATACAKE, copy the API under the account.
346 346  
347 - image 22 screen2
381 +[[image:image-20240510151944-3.png||height="581" width="1191"]]
348 348  
349 349  
350 -= 3. Example Project 1: LoRa Central Display =
351 351  
352 -[[image:image-20240916101737-1.png||height="468" width="683"]]
385 +[[image:image-20240510152150-4.png||height="697" width="1188"]]
353 353  
354 354  
355 -= 4. Example Project 2: LoRaWAN RS485 Alarm =
388 +[[image:image-20240510152300-5.png||height="298" width="1191"]]
356 356  
357 -= 5. The way to add a new panel to project =
358 358  
391 +[[image:image-20240510152355-6.png||height="782" width="1193"]]
359 359  
360 -**~1. Design a panel in SquareLine Studio, using image 5.1 below as a reference.**
393 +[[image:image-20240510152542-8.png||height="545" width="739"]]
361 361  
362 -[[image:image-20241121113445-1.png||height="584" width="934"]]
395 +[[image:image-20240510152634-9.png||height="748" width="740"]]
363 363  
364 - image 5.1 a panel about water_leak
365 365  
398 +[[image:image-20240510152809-10.png||height="607" width="732"]]
366 366  
367 -**2. Export the ui file.** You need  to adjust the export path first, then click "Export->Export UI Files". This step had been introduced before. Then you can get the ui files as shown in image 5.2.
400 +[[image:image-20240510153934-14.png||height="460" width="1199"]]
368 368  
369 -[[image:image-20241121141120-4.png||height="383" width="795"]]
370 370  
371 - image 5.2 ui files exported
403 +[[image:image-20240510153435-12.png||height="428" width="1197"]]
372 372  
373 373  
374 -**3. Delete or rename some file.** Here are the steps:
406 +Copy and paste the [[TTN decoder>>https://github.com/dragino/dragino-end-node-decoder]] here and save.
375 375  
376 - Step1 Delete the 'components' directory.
377 - Step2 Delete 'filelist.txt'.
378 - Step3 Delete 'ui_helpers.c' and 'ui_helpers.h'.
379 - Step4 Rename 'ui_ScreenMain.c' in the 'screens' directory to 'ui_water_leak_style.c'.
380 - Step5 Rename the 'screens' directory to 'styles'.
408 +[[image:image-20240510153624-13.png||height="468" width="1195"]]
381 381  
382 -[[image:image-20241121151934-10.png||height="303" width="792"]]
383 383  
384 - image 5.3 rest file (1)
411 +Visual widgets please read the DATACAKE documentation.
385 385  
386 -[[image:image-20241121142925-7.png||height="141" width="793"]]
413 +(% style="display:none" %) (%%)
387 387  
388 - image 5.4 rest file (2)
415 +== 2.6  Datalog Feature ==
389 389  
390 -**4. Open this project in vscode.**
391 391  
392 -5. Add file include path about water_leak in extra_lib/CMakeLists.txt as shown in image 5.5, 5.6, and its format is similar to the tem_hum or door.
418 +(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
419 +When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.
393 393  
394 -[[image:image-20241121181957-17.png||height="438" width="516"]]
395 395  
396 - image 5.5 extra_lib/CMakeLists.txt before add
422 +=== 2.6.1  Unix TimeStamp ===
397 397  
398 -[[image:image-20241121182239-18.png||height="520" width="518"]]
399 399  
400 - image 5.6 extra_lib/CMakeLists.txt after add
425 +Unix TimeStamp shows the sampling time of uplink payload. format base on
401 401  
402 -**6. Modify header file include in fonts and images directory.** Open the fonts/ui_font_Font12.c file, as shown in image 5.7, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.8 is the modified image. Other font file need to be modified in same way.
427 +[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
403 403  
404 -[[image:image-20241121171629-11.png]]
429 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
405 405  
406 - image 5.7 before-modified font file
431 +For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)
407 407  
408 -[[image:image-20241121171901-12.png]]
409 409  
410 - image 5.8 modified font file
434 +[[image:1655782409139-256.png]]
411 411  
412 -Open the images/ui_img_battery_empty_png.c file, as shown in image 5.9, then modify the '#include "../ui.h"' to '#include "../ui_water_leak.h"', the image 5.10 is the modified image. Other image file need to be modified in same way.
413 413  
414 -[[image:image-20241121172714-13.png]]
437 +=== 2.6.2  Poll sensor value ===
415 415  
416 - image 5.9 before-modified image file
417 417  
418 -[[image:image-20241121172908-14.png]]
440 +(((
441 +User can poll sensor value based on timestamps from the server. Below is the downlink command.
442 +)))
419 419  
420 - image 5.10 modified image file
444 +(((
445 +Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
446 +)))
421 421  
422 -**7. Modify the ui_water_leak/CMakeLists.txt.** Open this file, and modify it from image 5.11 to image 5.12.
448 +(((
449 +For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)
450 +)))
423 423  
424 -[[image:image-20241121180030-15.png]]
452 +(((
453 +Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data
454 +)))
425 425  
426 - image 5.11 ui_water_leak/CMakeLists.txt before modification
456 +(((
457 +Uplink Internal =5s，means PB01 will send one packet every 5s. range 5~~255s.
458 +)))
427 427  
428 -[[image:image-20241121180517-16.png]]
429 429  
430 - image 5.12 ui_water_leak/CMakeLists.txt after modification
461 +=== 2.6.3  Datalog Uplink payload ===
431 431  
432 -**8. Modify ui_water_leak.h file.** The image 5.13, 5.14 show the code before modification, and the image 5.15, 5.16 show the code after modification.
433 433  
434 -[[image:image-20241122094200-23.png]]
464 +See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]
435 435  
436 - image 5.13 ui_water_leak.h (1) before modification
466 +(% style="display:none" %) (%%) (% style="display:none" %)
437 437  
438 -[[image:image-20241122094320-24.png||height="852" width="554"]]
468 +== 2.7 Button ==
439 439  
440 - image 5.14 ui_water_leak.h (2) before modification
441 441  
442 -[[image:image-20241122094600-25.png||height="1078" width="554"]]
471 +* ACT button
443 443  
444 - image 5.15 ui_water_leak.h (1) after modification
473 +Long press this button PB01 will reset and join network again.
445 445  
446 -[[image:image-20241122094719-26.png||height="941" width="583"]]
475 +[[image:image-20240510161626-17.png||height="192" width="224"]]
447 447  
448 - image 5.16 ui_water_leak.h (2) before modification
477 +* Alarm button
449 449  
450 -**9. Modify ui_water_leak.c file.** The image 5.17, 5.18, 5.19 show the code before modification, and the image 5.20, 5.21, 5.22 show the code after modification.
479 +Press the button PB01 will immediately uplink data, and alarm is "TRUE".
451 451  
452 -_ui_flag_modify( ((lv_obj_t *)(e->user_data)), LV_OBJ_FLAG_HIDDEN, _UI_MODIFY_FLAG_TOGGLE);  This code replaces 4 lines of code in ui_water_leak.c, so it is pasted here for convenience.
481 +[[image:image-20240705095149-5.png||height="164" width="162"]](% style="display:none" %)
453 453  
454 -[[image:image-20241122102929-27.png||height="619" width="426"]]
455 455  
456 - image 5.17 ui_water_leak.c (1) before modification
484 +== 2.8 LED Indicator ==
457 457  
458 -[[image:image-20241122112838-30.png||height="551" width="628"]]
459 459  
460 - image 5.18 ui_water_leak.c (2) before modification
487 +(((
488 +The PB01 has a triple color LED which for easy showing different stage.
489 +)))
461 461  
462 -[[image:image-20241122110815-29.png||height="725" width="712"]]
491 +Hold the ACT green light to rest, then the green flashing node restarts, the blue flashing once upon request for network access, and the green constant light for 5 seconds after successful network access
463 463  
464 - image 5.19 ui_water_leak.c (3) before modification
493 +(((
494 +(% style="color:#037691" %)**In a normal working state**:
495 +)))
465 465  
466 -[[image:image-20241122113158-31.png||height="872" width="677"]]
497 +* When the node is restarted, hold the ACT (% style="color:green" %)**GREEN**(%%) lights up , then the (% style="color:green" %)**GREEN**(%%) flashing node restarts.The (% style="color:blue" %)**BLUE**(%%) flashing once upon request for network access, and the (% style="color:green" %)**GREEN**(%%) constant light for 5 seconds after successful network access(% style="color:#0000ff" %)**.**
498 +* During OTAA Join:
499 +** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.
500 +** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.
501 +* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.
502 +* Press the alarm button，The (% style="color:red" %)**RED**(%%) flashes until the node receives the ACK from the platform and the (% style="color:blue" %)**BLUE**(%%) light stays 5s.
467 467  
468 - image 5.20 ui_water_leak.c (1) after modification
504 +(((
505 +
506 +)))
469 469  
470 -[[image:image-20241122113259-33.png||height="874" width="724"]]
508 +== 2.9 Buzzer ==
471 471  
472 - image 5.21 ui_water_leak.c (2) after modification
473 473  
474 -[[image:image-20241122113359-34.png||height="804" width="746"]]
511 +The PB01 has** button sound** and** ACK sound** and users can turn on or off both sounds by using [[AT+SOUND>>||anchor="H3.3A0Setbuttonsoundandbuttonalarm"]].
475 475  
476 - image 5.22 ui_water_leak.c (3) after modification
513 +* (% style="color:#4f81bd" %)**Button sound**(%%)** **is the music produced by the node after the alarm button is pressed.
477 477  
478 -**10. Modify ui_water_leak_events.h file.** The image 5.23 show the code before modification, and the image 5.24 show the code after modification.
515 + Users can use[[ AT+OPTION>>||anchor="H3.4A0Setbuzzermusic2807E429"]] to set different button sounds.
479 479  
480 -[[image:image-20241122134113-35.png||height="380" width="421"]]
517 +* (% style="color:#4f81bd" %)**ACK sound **(%%)is the notification tone that the node receives ACK.
481 481  
482 - image 5.23 ui_water_leak_events_.h before modification
519 += 3.  Configure PB01 via AT command or LoRaWAN downlink =
483 483  
484 -[[image:image-20241122134420-37.png||height="201" width="283"]]
485 485  
486 -image 5.24 ui_water_leak_events_.h after modification
522 +Users can configure PB01 via AT Command or LoRaWAN Downlink.
487 487  
488 -**11. Modify ui_water_leak_events.c file.** The image 5.25 show the code before modification, and the image 5.26 show the code after modification.
524 +* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
489 489  
490 -Step1. '#include "ui.h"'~-~->'#include "ui_water_leak.h"'
526 +* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
491 491  
492 -Step2. add code  below in delete_object() function definition.
528 +There are two kinds of commands to configure PB01, they are:
493 493  
494 - panel_all * panel = find_upper_by_SensorPanel(&arr,((lv_obj_t *)(e->user_data~)~)~);
530 +* (% style="color:#4f81bd" %)**General Commands:**
495 495  
496 - size_t index = panel->panel_obj_index;
532 +These commands are to configure:
497 497  
498 - deleteElement(&arr, index);
534 +* General system settings like: uplink interval.
499 499  
500 -[[image:image-20241122135023-38.png||height="358" width="372"]]
536 +* LoRaWAN protocol & radio-related commands.
501 501  
502 - image 5.25 ui_water_leak_events_.c before modification
538 +They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
503 503  
504 -[[image:image-20241122135258-39.png||height="403" width="559"]]
505 505  
506 - image 5.26 ui_water_leak_events_.c after modification
541 +* (% style="color:#4f81bd" %)**Commands special design for PB01**
507 507  
543 +These commands are only valid for PB01, as below:
508 508  
509 -**12. Modify ui_water_leak_style.c file.**
545 +(% style="display:none" %) (%%)
510 510  
511 -Step1. '#include "../ui.h"'~-~->#include '"../ui_water_leak.h"'
547 +== 3.1  Downlink Command Set ==
512 512  
513 - add '#include "../../sort.h"'
514 514  
515 - add '#include "ui.h"'
550 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
551 +|=(% style="width: 130px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 151px; background-color: rgb(79, 129, 189); color: white;" %)**Function**|=(% style="width: 92px; background-color: rgb(79, 129, 189); color: white;" %)**Response**|=(% style="width: 206px; background-color: rgb(79, 129, 189); color: white;" %)**Downlink**
552 +|(% style="width:130px" %)AT+TDC=?|(% style="width:151px" %)(((
553 +
516 516  
517 -[[image:image-20241122141536-41.png||height="361" width="612"]]
555 +View current TDC time
556 +)))|(% style="width:92px" %)(((
557 +1200000
558 +OK
559 +)))|(% style="width:206px" %)Default 1200000(ms)
560 +|(% style="width:130px" %)AT+TDC=300000|(% style="width:151px" %)Set TDC time|(% style="width:92px" %)OK|(% style="width:206px" %)(((
561 +(((
562 +0X0100012C:
563 +01: fixed command
564 +00012C: 0X00012C=
518 518  
519 - image 5.27 ui_water_leak_style.c (1) before modification
566 +300(seconds)
567 +)))
520 520  
521 -[[image:image-20241122142129-42.png||height="386" width="613"]]
569 +(((
570 +
571 +)))
572 +)))
573 +|(% style="width:130px" %)ATZ|(% style="width:151px" %)Reset node|(% style="width:92px" %) |(% style="width:206px" %)0x04FF
574 +|(% style="width:130px" %)AT+FDR|(% style="width:151px" %)Restore factory settings|(% style="width:92px" %) |(% style="width:206px" %)0X04FE
575 +|(% style="width:130px" %)AT+CFM=?|(% style="width:151px" %)View the current confirmation mode status|(% style="width:92px" %)(((
576 +0,7,0
522 522  
523 - image 5.28 ui_water_leak_style.c (1) after modification
578 +OK
579 +)))|(% style="width:206px" %)Default 0,7,0
580 +|(% style="width:130px" %)AT+CFM=1,7,1|(% style="width:151px" %)(((
581 +Confirmed uplink mode, the maximum number of retries is seven, and uplink fcnt increase by 1 for each retry
582 +)))|(% style="width:92px" %)(((
583 +OK
584 +)))|(% style="width:206px" %)(((
585 +05010701
524 524  
587 +05: fixed command
525 525  
526 -Step2. modify 'void ui_ScreenMain_screen_init(void)'~-~->'panel_with_type create_water_leak(uint8_t index)'
589 +01:confirmed uplink
527 527  
528 - delete code as shown in image 5.29
591 +07: retry 7 times
529 529  
530 -[[image:image-20241122145620-44.png||height="757" width="671"]]
593 +01: fcnt count plus 1
594 +)))
595 +|(% style="width:130px" %)AT+NJM=?|(% style="width:151px" %)(((
596 +Check the current network connection method
597 +)))|(% style="width:92px" %)(((
598 +1
599 +OK
600 +)))|(% style="width:206px" %)Default 1
601 +|(% style="width:130px" %)AT+NJM=0|(% style="width:151px" %)Change the network connection method to ABP|(% style="width:92px" %)(((
602 +Attention:Take effect after ATZ
603 +OK
604 +)))|(% style="width:206px" %)(((
605 +0X2000: ABP
606 +0x2001: OTAA
607 +20: fixed command
608 +)))
609 +|(% style="width:130px" %)AT+RPL=?|(% style="width:151px" %)View current RPL settings|(% style="width:92px" %)(((
610 +0
611 +OK
612 +)))|(% style="width:206px" %)Default 0
613 +|(% style="width:130px" %)AT+RPL=1|(% style="width:151px" %)set RPL=1    |(% style="width:92px" %)OK|(% style="width:206px" %)(((
614 +0x2101:
615 +21: fixed command
616 +01: for details, check wiki
617 +)))
618 +|(% style="width:130px" %)AT+ADR=?|(% style="width:151px" %)View current ADR status|(% style="width:92px" %)(((
619 +1
620 +OK
621 +)))|(% style="width:206px" %)Default 0
622 +|(% style="width:130px" %)AT+ADR=0|(% style="width:151px" %)Set the ADR state to off|(% style="width:92px" %)OK|(% style="width:206px" %)(((
623 +0x2200: close
624 +0x2201: open
625 +22: fixed command
626 +)))
627 +|(% style="width:130px" %)AT+DR=?|(% style="width:151px" %)View the current DR settings|(% style="width:92px" %)OK|(% style="width:206px" %)
628 +|(% style="width:130px" %)AT+DR=1|(% style="width:151px" %)(((
629 +set DR to 1
630 +It takes effect only when ADR=0
631 +)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
632 +0X22000101:
633 +00: ADR=0
634 +01: DR=1
635 +01: TXP=1
636 +22: fixed command
637 +)))
638 +|(% style="width:130px" %)AT+TXP=?|(% style="width:151px" %)View the current TXP|(% style="width:92px" %)OK|(% style="width:206px" %)
639 +|(% style="width:130px" %)AT+TXP=1|(% style="width:151px" %)(((
640 +set TXP to 1
641 +It takes effect only when ADR=0
642 +)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
643 +0X22000101:
644 +00: ADR=0
645 +01: DR=1
646 +01: TXP=1
647 +22: fixed command
648 +)))
649 +|(% style="width:130px" %)AT+RJTDC=10|(% style="width:151px" %)Set RJTDC time interval|(% style="width:92px" %)OK|(% style="width:206px" %)(((
650 +0X26000A:
651 +26: fixed command
652 +000A: 0X000A=10(min)
653 +for details, check wiki
654 +)))
655 +|(% style="width:130px" %) |(% style="width:151px" %)(((
656 +(((
657 +~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
531 531  
532 - image 5.29 ui_water_leak_style.c (2)
659 +Retrieve stored data for a specified period of time
660 +)))
533 533  
662 +(((
663 +
664 +)))
665 +)))|(% style="width:92px" %) |(% style="width:206px" %)(((
666 +0X3161DE7C7061DE8A800A:
667 +31: fixed command
668 +61DE7C70:0X61DE7C70=2022/1/12 15:00:00
669 +61DE8A80:0X61DE8A80=2022/1/12 16:00:00
670 +0A: 0X0A=10(second)
671 +View details 2.6.2
672 +)))
673 +|(% style="width:130px" %)AT+DDETECT=?|(% style="width:151px" %)View the current DDETECT setting status and time|(% style="width:92px" %)(((
674 +1,1440,2880
675 +OK
676 +)))|(% style="width:206px" %)Default 1,1440,2880(min)
677 +|(% style="width:130px" %)AT+DDETECT=(((
678 +1,1440,2880
679 +)))|(% style="width:151px" %)(((
680 +Set DDETECT setting status and time
681 +((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))
682 +)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((
683 +0X320005A0: close
684 +0X320105A0: open
685 +32: fixed command
686 +05A0: 0X05A0=1440(min)
687 +)))
534 534  
535 -Step3. The image 5.30, 5.31 show the change.
689 +== 3.2  Set Password ==
536 536  
537 -[[image:image-20241122152026-45.png||height="277" width="828"]]
538 538  
539 - image 5.30 ui_water_leak_style.c (3) before modification
692 +Feature: Set device password, max 9 digits.
540 540  
541 -[[image:image-20241122152542-46.png||height="293" width="830"]]
694 +(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
542 542  
543 - image 5.31 ui_water_leak_style.c (3) after modification
696 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
697 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
698 +|(% style="width:155px" %)AT+PWORD=?|(% style="width:124px" %)Show password|(% style="width:86px" %)(((
699 +123456
700 +OK
701 +)))
702 +|(% style="width:155px" %)AT+PWORD=999999|(% style="width:124px" %)Set password|(% style="width:86px" %)OK
544 544  
704 +(% style="color:#4f81bd" %)**Downlink Command:**
545 545  
546 -Step4. Copy partly the code in ui_water_leak.c, paste at extra_lib/sort.h(The process is shown in image 5.32, 5.33).
706 +No downlink command for this feature.
547 547  
548 -[[image:image-20241122153958-47.png]]
549 549  
550 - image 5.32 ui_water_leak_style.c (4)
709 +== 3.3  Set button sound and ACK sound ==
551 551  
552 -[[image:image-20241122154755-49.png||height="864" width="513"]]
553 553  
554 - image 5.33 ui_water_leak_style.c (4)
712 +Feature: Turn on/off button sound and ACK alarm.
555 555  
714 +(% style="color:#4f81bd" %)**AT Command: AT+SOUND**
556 556  
557 -Step5. Delete event function in code which was just pasted in extra_lib/sort.h(The process is shown in image 5.34).
716 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
717 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
718 +|(% style="width:155px" %)(((
719 +AT+SOUND=?
720 +)))|(% style="width:124px" %)Get the current status of button sound and ACK sound|(% style="width:86px" %)(((
721 +1,1
722 +OK
723 +)))
724 +|(% style="width:155px" %)(((
725 +AT+SOUND=0,1
726 +)))|(% style="width:124px" %)Turn off the button sound and turn on ACK sound|(% style="width:86px" %)OK
558 558  
559 -[[image:image-20241122155650-50.png||height="922" width="513"]]
728 +(% style="color:#4f81bd" %)**Downlink Command: 0xA1 **
560 560  
561 - image 5.34 ui_water_leak_style.c (5)
730 +Format: Command Code (0xA1) followed by 2 bytes mode value.
562 562  
732 +The first byte after 0XA1 sets the button sound, and the second byte after 0XA1 sets the ACK sound.** (0: off, 1: on)**
563 563  
564 -Step6. Add some lines of code in extra_lib/sort.h as shown in image 5.35.
734 +* **Example: **Downlink Payload: A10001  ~/~/ Set AT+SOUND=0,1  Turn off the button sound and turn on ACK sound.
565 565  
566 -[[image:image-20241122161934-51.png]]
736 +== 3.4  Set buzzer music type(0~~4) ==
567 567  
568 - image 5.35
569 569  
739 +Feature: Set different alarm key response sounds.There are five different types of button music.
570 570  
571 -Step7. Add a line of code in extra_lib/sort.h as shown in image 5.36.
741 +(% style="color:#4f81bd" %)**AT Command: AT+OPTION**
572 572  
573 -[[image:image-20241122162852-53.png||height="330" width="529"]]
743 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
744 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
745 +|(% style="width:155px" %)(((
746 +AT+OPTION=?
747 +)))|(% style="width:124px" %)(((
748 +Get the buzzer music type
749 +)))|(% style="width:86px" %)(((
750 +3
574 574  
575 - image 5.37
752 +OK
753 +)))
754 +|(% style="width:155px" %)AT+OPTION=1|(% style="width:124px" %)Set the buzzer music to type 1|(% style="width:86px" %)OK
576 576  
756 +(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
577 577  
578 -Step8. Add some code in ui_water_leak_style.c as shown in image 5.38 from line534 to line 576 in detail.
758 +Format: Command Code (0xA3) followed by 1 byte mode value.
579 579  
580 -panel_with_type union_sensor;
760 +* **Example: **Downlink Payload: A300  ~/~/ Set AT+OPTION=0  Set the buzzer music to type 0.
581 581  
582 -union_sensor.panel_type = WATER_LEAK_TYPE;
762 +== 3.5  Set Valid Push Time ==
583 583  
584 -......
585 585  
586 -lv_obj_set_x(union_sensor.panel_union.door.ui_PanelSensorDoor, x_by_index(index));
765 +Feature: Set the holding time for pressing the alarm button to avoid miscontact. Values range from** 0 ~~1000ms**.
587 587  
588 -lv_obj_set_y(union_sensor.panel_union.door.ui_PanelSensorDoor, y_by_index(index));
767 +(% style="color:#4f81bd" %)**AT Command: AT+STIME**
589 589  
590 -return union_sensor;
769 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
770 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
771 +|(% style="width:155px" %)(((
772 +AT+STIME=?
773 +)))|(% style="width:124px" %)(((
774 +Get the button sound time
775 +)))|(% style="width:86px" %)(((
776 +0
777 +OK
778 +)))
779 +|(% style="width:155px" %)(((
780 +AT+STIME=1000
781 +)))|(% style="width:124px" %)Set the button sound time to 1000**ms**|(% style="width:86px" %)OK
591 591  
592 -[[image:image-20241122171211-54.png||height="635" width="792"]]
783 +(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
593 593  
594 - image 5.38
785 +Format: Command Code (0xA2) followed by 2 bytes mode value.
595 595  
787 +* **Example: **Downlink Payload: A203E8  ~/~/ Set AT+STIME=1000  
596 596  
597 -**13. Modify sort.c file.**
789 +**~ Explain: **Hold the alarm button for 10 seconds before the node will send the alarm packet.
598 598  
599 -Add a line of code ~-~-'#include "ui_water_leak.h"' as shown in image 5.39 line 16.
600 600  
601 -[[image:image-20241122173718-56.png||height="378" width="579"]]
602 602  
603 - image 5.39 sort.c (1)
793 += 4.  Battery & How to replace =
604 604  
605 -There are still some changes need to be done in sort.c, and omit here for the moment.
795 +== 4.1  Battery Type and replace ==
606 606  
607 607  
798 +PB01 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). Users can buy generic AAA battery and replace it.
799 +
800 +(% style="color:red" %)**Note: **
801 +
802 +1.  The PB01 doesn't have any screw, users can use nail to open it by the middle.
803 +
804 +[[image:image-20220621143535-5.png]]
805 +
806 +
807 +2.  Make sure the direction is correct when install the AAA batteries.
808 +
809 +[[image:image-20220621143535-6.png]]
810 +
811 +
812 +== 4.2  Power Consumption Analyze ==
813 +
814 +
815 +Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
816 +
817 +Instruction to use as below:
818 +
819 +(% style="color:blue" %)**Step 1**(%%):  Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
820 +
821 +[[battery calculator>>https://www.dropbox.com/sh/sxrgszkac4ips0q/AAA4XjBI3HAHNpdbU3ALN1j0a/Battery%20Document/Battery_Analyze?dl=0&subfolder_nav_tracking=1]]
822 +
823 +
824 +(% style="color:blue" %)**Step 2**(%%):  (% style="display:none" %) (%%)Open it and choose
825 +
826 +* Product Model
827 +* Uplink Interval
828 +* Working Mode
829 +
830 +And the Life expectation in difference case will be shown on the right.
831 +
832 +[[image:image-20220621143643-7.png||height="429" width="1326"]]
833 +
834 +
835 += 5.  Accessories =
836 +
837 +
838 +* (((
839 +(% class="wikigeneratedid" id="H5.2A0ProgramConverter28AS-0229" %)
840 +**Program Converter (AS-02)**
841 +)))
842 +
843 +AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:
844 +
845 +1. Access AT console of PB01 when used with USB-TTL adapter. [[See this link>>||anchor="H6.1HowtouseATCommandtoconfigurePB01"]].
846 +
847 +[[image:image-20220621141724-3.png]]
848 +
849 +
608 608  = 6. FAQ =
609 609  
610 -== 6.1 ==
852 +== 6.1 How to use AT Command to configure PB01 ==
611 611  
612 612  
855 +PB01 supports AT Command set. Users can use a USB to TTL adapter plus the Program Cable to connect to PB01 for using AT command, as below.
856 +
857 +[[image:image-20240511085914-1.png||height="570" width="602"]]
858 +
859 +
860 +**Connection:**
861 +
862 +* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin
863 +* (% style="background-color:yellow" %)USB to TTL RXD  <~-~-> Program Converter D+ pin
864 +* (% style="background-color:yellow" %)USB to TTL TXD  <~-~-> Program Converter A11 pin
865 +
866 +(((
867 +In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for PB01. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.
868 +)))
869 +
870 +(((
871 +Input password and ATZ to activate PB01, as shown below:
872 +)))
873 +
874 +[[image:image-20240510174509-18.png||height="572" width="791"]]
875 +
876 +
877 +== 6.2  AT Command and Downlink ==
878 +
879 +
880 +(((
881 +Sending ATZ will reboot the node
882 +)))
883 +
884 +(((
885 +Sending AT+FDR will restore the node to factory settings
886 +)))
887 +
888 +(((
889 +Get the node's AT command setting by sending AT+CFG
890 +)))
891 +
892 +(((
893 +
894 +)))
895 +
896 +(((
897 +**Example：**                                           
898 +)))
899 +
900 +(((
901 +AT+DEUI=FA 23 45 55 55 55 55 51
902 +
903 +AT+APPEUI=FF AA 23 45 42 42 41 11
904 +
905 +AT+APPKEY=AC D7 35 81 63 3C B6 05 F5 69 44 99 C1 12 BA 95
906 +
907 +AT+DADDR=FFFFFFFF
908 +
909 +AT+APPSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
910 +
911 +AT+NWKSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
912 +
913 +AT+ADR=1
914 +
915 +AT+TXP=7
916 +
917 +AT+DR=5
918 +
919 +AT+DCS=0
920 +
921 +AT+PNM=1
922 +
923 +AT+RX2FQ=869525000
924 +
925 +AT+RX2DR=0
926 +
927 +AT+RX1DL=5000
928 +
929 +AT+RX2DL=6000
930 +
931 +AT+JN1DL=5000
932 +
933 +AT+JN2DL=6000
934 +
935 +AT+NJM=1
936 +
937 +AT+NWKID=00 00 00 13
938 +
939 +AT+FCU=61
940 +
941 +AT+FCD=11
942 +
943 +AT+CLASS=A
944 +
945 +AT+NJS=1
946 +
947 +AT+RECVB=0:
948 +
949 +AT+RECV=
950 +
951 +AT+VER=EU868 v1.0.0
952 +
953 +AT+CFM=0,7,0
954 +
955 +AT+SNR=0
956 +
957 +AT+RSSI=0
958 +
959 +AT+TDC=1200000
960 +
961 +AT+PORT=2
962 +
963 +AT+PWORD=123456
964 +
965 +AT+CHS=0
966 +
967 +AT+RX1WTO=24
968 +
969 +AT+RX2WTO=6
970 +
971 +AT+DECRYPT=0
972 +
973 +AT+RJTDC=20
974 +
975 +AT+RPL=0
976 +
977 +AT+TIMESTAMP=systime= 2024/5/11 01:10:58 (1715389858)
978 +
979 +AT+LEAPSEC=18
980 +
981 +AT+SYNCMOD=1
982 +
983 +AT+SYNCTDC=10
984 +
985 +AT+SLEEP=0
986 +
987 +AT+ATDC=1
988 +
989 +AT+UUID=003C0C53013259E0
990 +
991 +AT+DDETECT=1,1440,2880
992 +
993 +AT+SETMAXNBTRANS=1,0
994 +
995 +AT+DISFCNTCHECK=0
996 +
997 +AT+DISMACANS=0
998 +
999 +AT+PNACKMD=0
1000 +
1001 +AT+SOUND=0,0
1002 +
1003 +AT+STIME=0
1004 +
1005 +AT+OPTION=3
1006 +)))
1007 +
1008 +(((
1009 +**Example：**
1010 +)))
1011 +
1012 +[[image:image-20240511091518-2.png||height="601" width="836"]]
1013 +
1014 +
1015 +== 6.3  How to upgrade the firmware? ==
1016 +
1017 +
1018 +PB01 requires a program converter to upload images to PB01, which is used to upload image to PB01 for:
1019 +
1020 +* Support new features
1021 +* For bug fix
1022 +* Change LoRaWAN bands.
1023 +
1024 + PB01 internal program is divided into bootloader and work program, shipping is included bootloader, the user can choose to directly update the work program.
1025 +
1026 +If the bootloader is erased for some reason, users will need to download the boot program and the work program.
1027 +
1028 +
1029 +=== 6.3.1 Update firmware (Assume device have bootloader) ===
1030 +
1031 +
1032 +(% style="color:blue" %)**Step 1**(%%):** Connect UART as per FAQ 6.1**
1033 +
1034 +(% style="color:blue" %)**Step 2**(%%):** Update follow [[Instruction for update via DraginoSensorManagerUtility.exe>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]. **
1035 +
1036 +
1037 +=== 6.3.2 Update firmware (Assume device doesn't have bootloader) ===
1038 +
1039 +
1040 +Download both the boot program and the worker program** . **After update , device will have bootloader so can use above 6.3.1 method to update woke program.
1041 +
1042 +(% style="color:blue" %)**Step 1**(%%):** **Install [[TremoProgrammer>>url:https://www.dropbox.com/scl/fo/gk1rb5pnnjw4kv5m5cs0z/h?rlkey=906ouvgbvif721f9bj795vfrh&dl=0]]  first.
1043 +
1044 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220615170542-5.png?rev=1.1||alt="image-20220615170542-5.png"]]
1045 +
1046 +(% style="color:blue" %)**Step 2**(%%): Hardware Connection
1047 +
1048 +Connect PC and PB01 via USB-TTL adapter .
1049 +
1050 +(% style="color:red" %)**Note: To download firmware in this way, you need to pull the boot pin(Program Converter D- pin) high to enter the burn mode. After burning, disconnect the boot pin of the node and the 3V3 pin of the USB-TTL adapter, and reset the node to exit the burning mode.**
1051 +
1052 +**Connection:**
1053 +
1054 +* (% style="background-color:yellow" %)USB-TTL GND <~-~-> Program Converter GND pin
1055 +* (% style="background-color:yellow" %)USB-TTL RXD  <~-~-> Program Converter D+ pin
1056 +* (% style="background-color:yellow" %)USB-TTL TXD  <~-~-> Program Converter A11 pin
1057 +* (% style="background-color:yellow" %)USB-TTL 3V3 <~-~-> Program Converter D- pin
1058 +
1059 +(% style="color:blue" %)**Step 3**(%%):** **Select the device port to be connected, baud rate and bin file to be downloaded.
1060 +
1061 +[[image:image-20240701160913-1.png]]
1062 +
1063 +Users need to reset the node to start downloading the program.
1064 +~1. Reinstall the battery to reset the node
1065 +2. Hold down the ACT button to reset the node (see [[2.7>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/PB01--LoRaWAN_Button_User_Manual/#H2.7Button]] ).
1066 +
1067 +When this interface appears, it indicates that the download has been completed.
1068 +
1069 +[[image:image-20240701160924-2.png]]
1070 +
1071 +Finally, Disconnect Program Converter D- pin, reset the node again , and the node exits burning mode.
1072 +
1073 +
1074 +== 6.4  How to change the LoRa Frequency Bands/Region? ==
1075 +
1076 +
1077 +User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.
1078 +
1079 +
1080 +== 6.5 Why i see different working temperature for the device? ==
1081 +
1082 +
1083 +The working temperature range of device depends on the battery user choose.
1084 +
1085 +* Normal AAA Battery can support -10 ~~ 50°C working range.
1086 +* Special AAA battery can support -40 ~~ 60 °C working range. For example: [[Energizer L92>>https://data.energizer.com/pdfs/l92.pdf]]
1087 +
613 613  = 7. Order Info =
614 614  
615 -== 7.1  Part Number ==
1090 +== 7.1  Main Device ==
616 616  
617 617  
618 -Part Number: (% style="color:#4472c4" %)LTS5
1093 +Part Number: (% style="color:#4472c4" %)PB01-LW-XX(%%) (white button) / (% style="color:#4472c4" %)PB01-LR-XX(%%)(Red Button)
619 619  
1095 +(% style="color:#4472c4" %)**XX **(%%): The default frequency band
620 620  
621 -== 7.2  Packing Info ==
1097 +* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band
1098 +* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band
1099 +* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band
1100 +* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band
1101 +* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band
1102 +* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band
1103 +* (% style="color:red" %)**IN865**(%%)**:  **LoRaWAN IN865 band
1104 +* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band
622 622  
1106 += 7. Packing Info =
623 623  
1108 +
624 624  **Package Includes**:
625 625  
626 -* LTS5 HMI Touch Screen
627 -* 5V,2A DC Power Adapter.
628 -* USB Type C Program Cable
1111 +* PB01 LoRaWAN Push Button x 1
629 629  
630 630  = 8. Support =
631 631  
... ... @@ -636,9 +636,7 @@
636 636  = 9.  Reference material =
637 637  
638 638  
639 -* Datasheet
640 -* Source Code
641 -* Mechinical
1122 +* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/scl/fo/y7pvm58wcr8319d5o4ujr/APZtqlbzRCNbHoPWTmmMMWs?rlkey=wfh93x2dhcev3ydn0846rinf0&st=kdp6lg7t&dl=0]]
642 642  
643 643  = 10. FCC Warning =
644 644  
1727229396732-319.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -197.2 KB
Content
1727229550717-684.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -113.9 KB
Content
1727229582471-566.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -73.6 KB
Content
1727229618724-758.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -118.7 KB
Content
1727229653254-680.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -116.2 KB
Content
1727229682537-381.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -51.5 KB
Content
1727229715361-392.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -75.2 KB
Content
1727229740592-843.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -87.3 KB
Content
1727229760857-521.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -24.7 KB
Content
1727229798126-306.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -53.6 KB
Content
1727229821582-258.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -76.1 KB
Content
1727229845835-509.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -68.3 KB
Content
1727229892636-154.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -192.0 KB
Content
1727229926561-300.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -178.0 KB
Content
1727229955611-607.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -100.4 KB
Content
1727229990795-405.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -383.6 KB
Content
1727230012478-930.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -477.1 KB
Content
1727231038705-173.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -94.6 KB
Content
1727233636007-933.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -114.8 KB
Content
1727484665746-713.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -94.9 KB
Content
1727485118799-984.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -11.8 KB
Content
1727485251053-655.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
1727485480434-713.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -24.7 KB
Content
1727485933579-550.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -55.6 KB
Content
1727485953726-175.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -91.6 KB
Content
1727486567182-334.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
1727486578489-774.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -66.0 KB
Content
1727487368023-281.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -28.5 KB
Content
1727488067077-684.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -604.7 KB
Content
1727488099947-341.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -877.7 KB
Content
1727488108117-780.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -877.7 KB
Content
1727488157579-949.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -877.7 KB
Content
Screenshot 2024-12-24 134818.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -15.0 KB
Content
Screenshot 2024-12-24 134937.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -3.6 KB
Content
Screenshot 2024-12-24 140459.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -12.0 KB
Content
Screenshot 2024-12-24 144005.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -28.0 KB
Content
image-20240916101737-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -156.7 KB
Content
image-20240925110638-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -262.7 KB
Content
image-20240928090825-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -30.2 KB
Content
image-20240928103357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -153.7 KB
Content
image-20240928103506-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -197.7 KB
Content
image-20240928105309-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -80.2 KB
Content
image-20240928110211-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -228.0 KB
Content
image-20240928111412-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -150.9 KB
Content
image-20240928111654-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -105.4 KB
Content
image-20240928112001-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -75.6 KB
Content
image-20240928113424-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -50.8 KB
Content
image-20240928114139-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -114.3 KB
Content
image-20240928144830-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
image-20241121113445-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -250.0 KB
Content
image-20241121120222-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -44.8 KB
Content
image-20241121120830-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -42.6 KB
Content
image-20241121141120-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -41.7 KB
Content
image-20241121141315-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -29.4 KB
Content
image-20241121141329-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -29.4 KB
Content
image-20241121142925-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -14.8 KB
Content
image-20241121145915-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -61.0 KB
Content
image-20241121150911-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -73.0 KB
Content
image-20241121151934-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -32.9 KB
Content
image-20241121171629-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -16.9 KB
Content
image-20241121171901-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -17.2 KB
Content
image-20241121172714-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -26.4 KB
Content
image-20241121172908-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -27.1 KB
Content
image-20241121180030-15.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -27.7 KB
Content
image-20241121180517-16.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -26.5 KB
Content
image-20241121181957-17.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -59.3 KB
Content
image-20241121182239-18.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -71.3 KB
Content
image-20241122092239-19.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -270.9 KB
Content
image-20241122092655-20.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -251.6 KB
Content
image-20241122093445-21.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -128.9 KB
Content
image-20241122093601-22.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -120.0 KB
Content
image-20241122094200-23.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -289.2 KB
Content
image-20241122094320-24.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -182.4 KB
Content
image-20241122094600-25.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -136.0 KB
Content
image-20241122094719-26.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -129.5 KB
Content
image-20241122102929-27.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -219.9 KB
Content
image-20241122104344-28.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -257.1 KB
Content
image-20241122110815-29.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -246.1 KB
Content
image-20241122112838-30.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -263.9 KB
Content
image-20241122113158-31.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -133.7 KB
Content
image-20241122113252-32.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -152.3 KB
Content
image-20241122113259-33.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -152.3 KB
Content
image-20241122113359-34.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -126.5 KB
Content
image-20241122134113-35.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -69.3 KB
Content
image-20241122134412-36.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20241122134420-37.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20241122135023-38.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20241122135258-39.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -40.3 KB
Content
image-20241122141526-40.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -78.8 KB
Content
image-20241122141536-41.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -78.8 KB
Content
image-20241122142129-42.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -85.1 KB
Content
image-20241122143105-43.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -60.2 KB
Content
image-20241122145620-44.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -394.0 KB
Content
image-20241122152026-45.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -201.6 KB
Content
image-20241122152542-46.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -95.3 KB
Content
image-20241122153958-47.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -241.1 KB
Content
image-20241122154745-48.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20241122154755-49.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20241122155650-50.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -104.4 KB
Content
image-20241122161934-51.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -230.3 KB
Content
image-20241122162612-52.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -58.7 KB
Content
image-20241122162852-53.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -125.5 KB
Content
image-20241122171211-54.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -173.3 KB
Content
image-20241122173706-55.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -37.6 KB
Content
image-20241122173718-56.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.xieby
Size
... ... @@ -1,1 +1,0 @@
1 -37.6 KB
Content
image-20241226135550-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -293.3 KB
Content
squalreline-trial.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -60.4 KB
Content
squareline-studio-launcher-screen.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -203.4 KB
Content
squareline.io_downloads.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.pradeeka
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 MB
Content