Changes for page LT-22222-L -- LoRa I/O Controller User Manual

Last modified by Saxer Lin on 2025/04/15 17:24

From version < 83.10 >

edited by Xiaoling
on 2022/06/29 17:30

To version < 101.3 >

edited by Xiaoling
on 2022/10/25 15:22

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 5 added, 0 removed)

Details

Page properties

Content

@@ -15,13 +15,16 @@
  = 1.Introduction =
++
  == 1.1 What is LT Series I/O Controller ==
  (((
++(((
  The Dragino (% style="color:blue" %)**LT series I/O Modules**(%%) are Long Range LoRaWAN I/O Controller. It contains different I/O Interfaces such as:** (% style="color:blue" %)analog current Input, analog voltage input(%%)**(% style="color:blue" %), **relay output**, **digital input**(%%) and (% style="color:blue" %)**digital output**(%%) etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring.
  )))
++)))
  (((
  The LT I/O Controllers allows the user to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
@@ -36,11 +36,13 @@
  )))
  (((
--1) If user’s area has LoRaWAN service coverage, they can just install the I/O controller and configure it to connect the LoRaWAN provider via wireless.
++1) If user's area has LoRaWAN service coverage, they can just install the I/O controller and configure it to connect the LoRaWAN provider via wireless.
  )))
  (((
 ) User can set up a LoRaWAN gateway locally and configure the controller to connect to the gateway via wireless.
++
++
  )))
  (((
@@ -55,7 +55,7 @@
  (((
--**Hardware System:**
++(% style="color:#037691" %)**Hardware System:**
  )))
  * (((
@@ -80,7 +80,7 @@
  (((
--**Interface for Model: LT22222-L:**
++(% style="color:#037691" %)**Interface for Model: LT22222-L:**
  )))
  * (((
@@ -105,7 +105,7 @@
  (((
--**LoRa Spec:**
++(% style="color:#037691" %)**LoRa Spec:**
  )))
  * (((
@@ -166,14 +166,16 @@
  Packet engine up to 256 bytes with CRC.
++
  )))
  == 1.3 Features ==
++
  * LoRaWAN Class A & Class C protocol
  * Optional Customized LoRa Protocol
--* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/RU864/IN865
++* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/RU864/IN865/MA869
  * AT Commands to change parameters
  * Remote configure parameters via LoRa Downlink
  * Firmware upgradable via program port
@@ -181,6 +181,7 @@
  == 1.4  Applications ==
++
  * Smart Buildings & Home Automation
  * Logistics and Supply Chain Management
  * Smart Metering
@@ -190,6 +190,7 @@
  == 1.5 Hardware Variants ==
++
  (% border="1" style="background-color:#f7faff; width:500px" %)
  |(% style="width:103px" %)**Model**|(% style="width:131px" %)**Photo**|(% style="width:334px" %)**Description**
  |(% style="width:103px" %)**LT22222-L**|(% style="width:131px" %)[[image:1653296302983-697.png]]|(% style="width:334px" %)(((
@@ -203,10 +203,15 @@
  = 2. Power ON Device =
++
++(((
  The LT controller can be powered by 7 ~~ 24V DC power source. Connect VIN to Power Input V+ and GND to power input V- to power the LT controller.
++)))
  (((
  PWR will on when device is properly powered.
++
++
  )))
  [[image:1653297104069-180.png]]
@@ -215,8 +215,10 @@
  = 3. Operation Mode =
++
  == 3.1 How it works? ==
++
  (((
  The LT is configured as LoRaWAN OTAA Class C mode by default. It has OTAA keys to join network. To connect a local LoRaWAN network, user just need to input the OTAA keys in the network server and power on the LT. It will auto join the network via OTAA. For LT-22222-L, the LED will show the Join status: After power on (% style="color:green" %)**TX LED**(%%) will fast blink 5 times, LT-22222-L will enter working mode and start to JOIN LoRaWAN network. (% style="color:green" %)**TX LED**(%%) will be on for 5 seconds after joined in network. When there is message from server, the RX LED will be on for 1 second.
  )))
@@ -226,10 +226,14 @@
  )))
++
  == 3.2 Example to join LoRaWAN network ==
++
  (((
  This chapter shows an example for how to join the TTN LoRaWAN Network. Below is the network structure, we use our LG308 as LoRaWAN gateway here.
++
++
  )))
  [[image:image-20220523172350-1.png||height="266" width="864"]]
@@ -237,6 +237,8 @@
  (((
  The LG308 is already set to connect to [[TTN network >>url:https://www.thethingsnetwork.org/]]. So what we need to do now is only configure register this device to TTN:
++
++
  )))
  (((
@@ -252,18 +252,21 @@
  Input these keys in the LoRaWAN Server portal. Below is TTN screen shot:
--Add APP EUI in the application.
++**Add APP EUI in the application.**
  [[image:1653297955910-247.png||height="321" width="716"]]
--Add APP KEY and DEV EUI
++**Add APP KEY and DEV EUI**
  [[image:1653298023685-319.png]]
++
  (((
  (% style="color:blue" %)**Step 2**(%%): Power on LT and it will auto join to the TTN network. After join success, it will start to upload message to TTN and user can see in the panel.
++
++
  )))
  [[image:1653298044601-602.png||height="405" width="709"]]
@@ -272,6 +272,7 @@
  == 3.3 Uplink Payload ==
++
  There are five working modes + one interrupt mode on LT for different type application:
  * (% style="color:blue" %)**MOD1**(%%): (default setting): 2 x ACI + 2AVI + DI + DO + RO
@@ -281,11 +281,12 @@
  * (% style="color:blue" %)**MOD5**(%%): Single DI Counting + 2 x AVI + 1 x ACI + DO + RO
  * (% style="color:blue" %)**ADDMOD6**(%%): Trigger Mode, Optional, used together with MOD1 ~~ MOD5
--
--
  === 3.3.1 AT+MOD~=1, 2ACI+2AVI ===
++
++(((
  The uplink payload includes totally 9 bytes. Uplink packets use FPORT=2 and every 10 minutes send one uplink by default.
++)))
  [[image:image-20220523174024-3.png]]
@@ -301,7 +301,7 @@
  * DI is for digital input. DIx=1: high or float, DIx=0: low.
  * DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
--(% style="color:red" %)Note: DI3 and DO3 bit are not valid for LT-22222-L
++(% style="color:red" %)**Note: DI3 and DO3 bit are not valid for LT-22222-L**
  For example if payload is: [[image:image-20220523175847-2.png]]
@@ -321,8 +321,6 @@
  * [1] RO1 relay channel is close and the RO1 LED is ON.
  * [0] RO2 relay channel is open and RO2 LED is OFF;
--
--
  **LT22222-L:**
  * [1] DI2 channel is high input and DI2 LED is ON;
@@ -338,12 +338,12 @@
  ** DO1 is high in case there is load between DO1 and V+.
  ** DO1 LED is off in both case
--
--
  === 3.3.2 AT+MOD~=2, (Double DI Counting) ===
++(((
  **For LT-22222-L**: this mode the **DI1 and DI2** are used as counting pins.
++)))
  (((
  Total : 11 bytes payload
@@ -363,7 +363,7 @@
  * DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
  (((
--(% style="color:red" %)Note: DO3 bit is not valid for LT-22222-L.
++(% style="color:red" %)**Note: DO3 bit is not valid for LT-22222-L.**
  )))
  (((
@@ -375,16 +375,22 @@
  (% class="box infomessage" %)
  (((
  (((
++(((
  **AT+MOD=2**
++)))
++(((
  **ATZ**
  )))
  )))
++)))
  (((
  (% style="color:#4f81bd" %)**AT Commands for counting:**
++
++
  )))
  (((
@@ -408,6 +408,7 @@
  === 3.3.3 AT+MOD~=3, Single DI Counting + 2 x ACI ===
++
  **LT22222-L**: This mode the DI1 is used as a counting pin.
  [[image:image-20220523181246-5.png]]
@@ -425,7 +425,7 @@
  * DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
  (((
--(% style="color:red" %)Note: DO3 is not valid for LT-22222-L.
++(% style="color:red" %)**Note: DO3 is not valid for LT-22222-L.**
  )))
@@ -436,11 +436,15 @@
  (% class="box infomessage" %)
  (((
  (((
++(((
  **AT+MOD=3**
++)))
++(((
  **ATZ**
  )))
  )))
++)))
  (((
  Other AT Commands for counting are similar to [[MOD2 Counting Command>>||anchor="H3.3.2AT2BMOD3D22C28DoubleDICounting29"]].
@@ -451,9 +451,13 @@
  === 3.3.4 AT+MOD~=4, Single DI Counting + 1 x Voltage Counting ===
++(((
  **LT22222-L**: This mode the DI1 is used as a counting pin.
++)))
++(((
  The AVI1 is also used for counting. AVI1 is used to monitor the voltage. It will check the voltage **every 60s**, if voltage is higher or lower than VOLMAX mV, the AVI1 Counting increase 1, so AVI1 counting can be used to measure a machine working hour.
++)))
  [[image:image-20220523181903-8.png]]
@@ -469,7 +469,7 @@
  * DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
  (((
--(% style="color:red" %)Note: DO3 is not valid for LT-22222-L.
++(% style="color:red" %)**Note: DO3 is not valid for LT-22222-L.**
  )))
  (((
@@ -481,14 +481,17 @@
  (% class="box infomessage" %)
  (((
  (((
++(((
  **AT+MOD=4**
++)))
++(((
  **ATZ**
  )))
  )))
++)))
--
  (((
  Other AT Commands for counting are similar to [[MOD2 Counting Command>>||anchor="H3.3.2AT2BMOD3D22C28DoubleDICounting29"]].
  )))
@@ -530,7 +530,7 @@
  )))
  (((
--(% style="color:red" %)Note: DO3 is not valid for LT-22222-L.
++(% style="color:red" %)**Note: DO3 is not valid for LT-22222-L.**
  )))
  (((
@@ -542,11 +542,15 @@
  (% class="box infomessage" %)
  (((
  (((
++(((
  **AT+MOD=5**
++)))
++(((
  **ATZ**
  )))
  )))
++)))
  (((
  Other AT Commands for counting are similar to [[MOD2 Counting Command>>||anchor="H3.3.2AT2BMOD3D22C28DoubleDICounting29"]].
@@ -569,7 +569,6 @@
 . Periodically uplink (Base on TDC time). Payload is same as the normal MOD (MOD 1 for above command). This uplink uses LoRaWAN (% style="color:#4f81bd" %)**unconfirmed**(%%) data type
 . Trigger uplink when meet the trigger condition. LT will sent two packets in this case, the first uplink use payload specify in this mod (mod=6), the second packets use the normal mod payload(MOD=1 for above settings). Both Uplinks use LoRaWAN (% style="color:#4f81bd" %)**CONFIRMED data type.**
--
  (% style="color:#037691" %)**AT Command to set Trigger Condition**:
@@ -577,6 +577,7 @@
  Format: AT+AVLIM=<AV1_LIMIT_LOW>,< AV1_LIMIT_HIGH>,<AV2_LIMIT_LOW>,< AV2_LIMIT_HIGH>
++
  **Example:**
  AT+AVLIM=3000,6000,0,2000   (If AVI1 voltage lower than 3v or higher than 6v.  or AV2 voltage is higher than 2v, LT will trigger Uplink)
@@ -589,6 +589,7 @@
  Format: AT+ACLIM=<AC1_LIMIT_LOW>,< AC1_LIMIT_HIGH>,<AC2_LIMIT_LOW>,< AC2_LIMIT_HIGH>
++
  **Example:**
  AT+ACLIM=10000,15000,0,0   (If ACI1 voltage lower than 10mA or higher than 15mA, trigger an uplink)
@@ -607,6 +607,7 @@
  AT+ DTRI =1,0   (Enable DI1 trigger / disable DI2 trigger)
++
  (% style="color:#037691" %)**Downlink Command to set Trigger Condition:**
  Type Code: 0xAA. Downlink command same as AT Command **AT+AVLIM, AT+ACLIM**
@@ -655,6 +655,7 @@
  10100000: Means the system has configure to use the trigger: AC1_LOW and AV2_LOW
++
  (% style="color:#4f81bd" %)**TRI Status1**(%%) is a combination to show which condition is trigger. Totally 1byte as below
  [[image:image-20220524090249-3.png]]
@@ -666,6 +666,7 @@
  10000000: Means this packet is trigger by AC1_LOW. Means voltage too low.
++
  (% style="color:#4f81bd" %)**TRI_DI FLAG+STA **(%%)is a combination to show which condition is trigger. Totally 1byte as below
  [[image:image-20220524090456-4.png]]
@@ -679,6 +679,7 @@
  00000101: Means both DI1 and DI2 trigger are enabled.
++
  (% style="color:#4f81bd" %)**Enable/Disable MOD6 **(%%): 0x01: MOD6 is enable. 0x00: MOD6 is disable.
  Downlink command to poll MOD6 status:
@@ -689,41 +689,49 @@
++
  === 3.3.7 Payload Decoder ===
  (((
--**Decoder for TTN/loraserver/ChirpStack**: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/Payload_decoder/>>url:http://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/Payload_decoder/]]
--
--
++**Decoder for TTN/loraserver/ChirpStack**:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
  )))
++
  == 3.4 Configure LT via AT or Downlink ==
++
++(((
  User can configure LT I/O Controller via AT Commands or LoRaWAN Downlink Commands
++)))
  (((
++(((
  There are two kinds of Commands:
  )))
++)))
  * (% style="color:#4f81bd" %)**Common Commands**(%%): They should be available for each sensor, such as: change uplink interval, reset device. For firmware v1.5.4, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
  * (% style="color:#4f81bd" %)**Sensor Related Commands**(%%): These commands are special designed for LT-22222-L.  User can see these commands below:
--
--
  === 3.4.1 Common Commands ===
++
++(((
  They should be available for each of Dragino Sensors, such as: change uplink interval, reset device. For firmware v1.5.4, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
++)))
  === 3.4.2 Sensor related commands ===
++
  ==== 3.4.2.1 Set Transmit Interval ====
++
  Set device uplink interval.
  * (% style="color:#037691" %)**AT Command:**
@@ -743,6 +743,7 @@
  ==== 3.4.2.2 Set Work Mode (AT+MOD) ====
++
  Set work mode.
  * (% style="color:#037691" %)**AT Command:**
@@ -762,6 +762,7 @@
  ==== 3.4.2.3 Poll an uplink ====
++
  * (% style="color:#037691" %)**AT Command:**
  There is no AT Command to poll uplink
@@ -771,12 +771,15 @@
  **0x08 FF     **~/~/ Poll an uplink
++
  **Example**: 0x08FF, ask device to send an Uplink
++
  ==== 3.4.2.4 Enable Trigger Mode ====
++
  Use of trigger mode, please check [[ADDMOD6>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
  * (% style="color:#037691" %)**AT Command:**
@@ -797,6 +797,7 @@
  ==== 3.4.2.5 Poll trigger settings ====
++
  Poll trigger settings,
  * (% style="color:#037691" %)**AT Command:**
@@ -813,6 +813,7 @@
  ==== 3.4.2.6 Enable / Disable DI1/DI2/DI3 as trigger ====
++
  Enable Disable DI1/DI2/DI2 as trigger,
  * (% style="color:#037691" %)**AT Command:**
@@ -833,6 +833,7 @@
  ==== 3.4.2.7 Trigger1 – Set DI1 or DI3 as trigger ====
++
  Set DI1 or DI3(for LT-33222-L) trigger.
  * (% style="color:#037691" %)**AT Command:**
@@ -854,6 +854,7 @@
  ==== 3.4.2.8 Trigger2 – Set DI2 as trigger ====
++
  Set DI2 trigger.
  * (% style="color:#037691" %)**AT Command:**
@@ -880,6 +880,7 @@
  ==== 3.4.2.9 Trigger – Set AC (current) as trigger ====
++
  Set current trigger , base on AC port. See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
  * (% style="color:#037691" %)**AT Command**
@@ -896,6 +896,7 @@
  ==== 3.4.2.10 Trigger – Set AV (voltage) as trigger ====
++
  Set current trigger , base on AV port. See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
  * (% style="color:#037691" %)**AT Command**
@@ -912,6 +912,7 @@
  ==== 3.4.2.11 Trigger – Set minimum interval ====
++
  Set AV and AC trigger minimum interval, system won't response to the second trigger within this set time after the first trigger.
  * (% style="color:#037691" %)**AT Command**
@@ -926,13 +926,15 @@
  (((
--(% style="color:red" %)Note: ATDC setting must be more than 5min
++(% style="color:red" %)**Note: ATDC setting must be more than 5min**
  )))
++
  ==== 3.4.2.12 DO ~-~- Control Digital Output DO1/DO2/DO3 ====
++
  * (% style="color:#037691" %)**AT Command**
  There is no AT Command to control Digital Output
@@ -952,11 +952,11 @@
  [[image:image-20220524092754-5.png]]
  (((
--(% style="color:red" %)Note: For LT-22222-L, there is no DO3, the last byte can use any value.
++(% style="color:red" %)**Note: For LT-22222-L, there is no DO3, the last byte can use any value.**
  )))
  (((
--(% style="color:red" %)Device will upload a packet if downlink code executes successfully.
++(% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
  )))
@@ -964,6 +964,7 @@
  ==== 3.4.2.13 DO ~-~- Control Digital Output DO1/DO2/DO3 with time control ====
++
  * (% style="color:#037691" %)**AT Command**
  There is no AT Command to control Digital Output
@@ -1000,11 +1000,11 @@
  [[image:image-20220524093351-8.png]]
--(% style="color:#4f81bd" %)**Sixth and Seventh Byte**:
++(% style="color:#4f81bd" %)**Sixth and Seventh and Eighth and Ninth Byte**:
           Latching time. Unit: ms
--Device will upload a packet if downlink code executes successfully.
++(% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
  **Example payload:**
@@ -1030,6 +1030,7 @@
  ==== 3.4.2.14 Relay ~-~- Control Relay Output RO1/RO2 ====
++
  * (% style="color:#037691" %)**AT Command:**
  There is no AT Command to control Relay Output
@@ -1052,7 +1052,7 @@
  [[image:image-20220524093724-9.png]]
  )))
--Device will upload a packet if downlink code executes successfully.
++(% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
@@ -1059,6 +1059,7 @@
  ==== 3.4.2.15 Relay ~-~- Control Relay Output RO1/RO2 with time control ====
++
  * (% style="color:#037691" %)**AT Command:**
  There is no AT Command to control Relay Output
@@ -1082,37 +1082,37 @@
  (% style="color:#4f81bd" %)**Third Byte(bb)**(%%): Control Method and Ports status:
--[[image:image-20220524093831-10.png]]
++[[image:image-20221008095908-1.png||height="364" width="564"]]
--(% style="color:#4f81bd" %)**Fourth/Fifth Bytes(cc)**(%%): Latching time. Unit: ms
++(% style="color:#4f81bd" %)**Fourth/Fifth/Sixth/Seventh Bytes(cc)**(%%): Latching time. Unit: ms
--Device will upload a packet if downlink code executes successfully.
++(% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
  **Example payload:**
--**~1. 05 01 11 07 D0**
++**~1. 05 01 11 07 D**
--Relay1 and Relay 2 will be set to NO , last 2 seconds, then change back to original state.
++Relay1 and Relay 2 will be set to NC , last 2 seconds, then change back to original state.
  **2. 05 01 10 07 D0**
--Relay1 will change to NO, Relay2 will change to NC, last 2 seconds, then both change back to original state.
++Relay1 will change to NC, Relay2 will change to NO, last 2 seconds, then both change back to original state.
  **3. 05 00 01 07 D0**
--Relay1 will change to NC, Relay2 will change to NO, last 2 seconds, then relay change to NO, Relay2 change to NC.
++Relay1 will change to NO, Relay2 will change to NC, last 2 seconds, then relay change to NC,Relay2 change to NO.
  **4. 05 00 00 07 D0**
--Relay 1 & relay2 will change to NC, last 2 seconds, then both change to NO.
++Relay 1 & relay2 will change to NO, last 2 seconds, then both change to NC.
--
  ==== 3.4.2.16 Counting ~-~- Voltage threshold counting ====
++
  When voltage exceed the threshold, count. Feature see [[MOD4>>||anchor="H3.3.4AT2BMOD3D42CSingleDICounting2B1xVoltageCounting"]]
  * (% style="color:#037691" %)**AT Command:**
@@ -1129,6 +1129,7 @@
  ==== 3.4.2.17 Counting ~-~- Pre-configure the Count Number ====
++
  * (% style="color:#037691" %)**AT Command:**
  **AT+SETCNT=aa,(bb cc dd ee) **
@@ -1151,6 +1151,7 @@
  ==== 3.4.2.18 Counting ~-~- Clear Counting ====
++
  Clear counting for counting mode
  * (% style="color:#037691" %)**AT Command:**
@@ -1167,6 +1167,7 @@
  ==== 3.4.2.19 Counting ~-~- Change counting mode save time ====
++
  * (% style="color:#037691" %)**AT Command:**
  **AT+COUTIME=60  **~/~/ Set save time to 60 seconds. Device will save the counting result in internal flash every 60 seconds. (min value: 30)
@@ -1179,13 +1179,127 @@
  (((
  range: aa bb cc:0 to 16777215,  (unit:second)
++
++
  )))
++==== 3.4.2.20 Reset save DR DO state ====
++* (% style="color:#037691" %)**AT Command:**
++
++**AT+RODORET=1  **~/~/ RODO will close when the device joining the network. (default)
++
++**AT+RODORET=0  **~/~/After the device is reset, the previously saved RODO state (only MOD2 to MOD5) is read, and its state is not changed when it is reconnected to the network.
++
++
++* (% style="color:#037691" %)**Downlink Payload (prefix 0xAD):**
++
++**0x AD aa      **~/~/ same as AT+RODORET =aa
++
++(((
++
++
++
++
++==== 3.4.2.21 Encrypted payload ====
++
++
++* (% style="color:#037691" %)**AT Command:**
++
++**AT+DECRYPT=1  **~/~/ The payload is uploaded without encryption
++
++**AT+DECRYPT=0  **~/~/Encrypt when uploading payload (default)
++
++
++
++
++==== 3.4.2.22 Get sensor value ====
++
++
++* (% style="color:#037691" %)**AT Command:**
++
++**AT+GETSENSORVALUE=0  **~/~/ The serial port gets the reading of the current sensor
++
++**AT+GETSENSORVALUE=1  **~/~/The serial port gets the current sensor reading and uploads it.
++
++
++
++
++==== 3.4.2.23 Resets the downlink packet count ====
++
++
++* (% style="color:#037691" %)**AT Command:**
++
++**AT+DISFCNTCHECK=0  **~/~/ When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node will no longer receive downlink packets (default)
++
++**AT+DISFCNTCHECK=1  **~/~/When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node resets the downlink packet count and keeps it consistent with the server downlink packet count.
++
++
++
++
++==== 3.4.2.24 When the limit bytes are exceeded, upload in batches ====
++
++
++* (% style="color:#037691" %)**AT Command:**
++
++       **AT+DISMACANS=0**     ~/~/ When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of 11 bytes (DR0 of US915, DR2 of AS923, DR2 of AU195), the node will send a packet with a payload of 00 and a port of 4. (default)
++
++       **AT+DISMACANS=1**      ~/~/ When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of the DR, the node will ignore the MACANS and not reply, and only upload the payload part.
++
++
++* (% style="color:#037691" %)**Downlink Payload **(%%)**:**
++
++**0x21 00 01 **         ~/~/ Set  the DISMACANS=1
++
++
++
++
++==== 3.4.2.25 Copy downlink to uplink ====
++
++
++* (% style="color:#037691" %)**AT Command**(%%)**:**
++
++       **AT+RPL=5**     ~/~/ After receiving the package from the server, it will immediately upload the content of the package to the server, the port number is 100.
++
++Example：**aa xx xx xx xx**         ~/~/ aa indicates whether the configuration has changed, 00 is yes, 01 is no; xx xx xx xx are the bytes sent.
++
++
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173747-6.png?width=1124&height=165&rev=1.1||alt="image-20220823173747-6.png"]]
++
++For example, sending 11 22 33 44 55 66 77 will return invalid configuration 00 11 22 33 44 55 66 77.
++
++
++
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173833-7.png?width=1124&height=149&rev=1.1||alt="image-20220823173833-7.png"]]
++
++For example, if 01 00 02 58 is issued, a valid configuration of 01 01 00 02 58 will be returned.
++
++
++
++==== 3.4.2.26 Query version number and frequency band 、TDC ====
++
++
++* (((
++(% style="color:#037691" %)**Downlink Payload**(%%)**:**
++
++**26 01  **   ~/~/  Downlink 26 01 can query device upload frequency, frequency band, software version number, TDC time.
++
++
++)))
++
++**Example：**
++
++[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173929-8.png?width=1205&height=76&rev=1.1||alt="image-20220823173929-8.png"]]
++
++
++
++)))
++
  == 3.5 Integrate with Mydevice ==
++
  Mydevices provides a human friendly interface to show the sensor data, once we have data in TTN, we can use Mydevices to connect to TTN and see the data in Mydevices. Below are the steps:
  (((
@@ -1194,14 +1194,15 @@
  (((
  (% style="color:blue" %)**Step 2**(%%): To configure the Application to forward data to Mydevices you will need to add integration. To add the Mydevices integration, perform the following steps:
++
++
  )))
--[[image:1653356737703-362.png||height="232" width="732"]]
++[[image:image-20220719105525-1.png||height="377" width="677"]]
--[[image:image-20220524094641-11.png||height="390" width="723"]]
--[[image:image-20220524094641-12.png||height="402" width="718"]]
++[[image:image-20220719110247-2.png||height="388" width="683"]]
  (% style="color:blue" %)**Step 3**(%%): Create an account or log in Mydevices.
@@ -1234,8 +1234,10 @@
  == 3.6 Interface Detail ==
++
  === 3.6.1 Digital Input Port: DI1/DI2 /DI3 ( For LT-33222-L, low active ) ===
++
  Support NPN Type sensor
  [[image:1653356991268-289.png]]
@@ -1244,6 +1244,7 @@
  === 3.6.2 Digital Input Port: DI1/DI2 ( For LT-22222-L) ===
++
  (((
  The DI port of LT-22222-L can support NPN or PNP output sensor.
  )))
@@ -1250,7 +1250,9 @@
  (((
  (((
--Internal circuit as below, the NEC2501 is a photocoupler, the Active current (from NEC2501 pin 1 to pin 2 is 1ma and the max current is 50mA. When there is active current pass NEC2501 pin1 to pin2. The DI will be active high
++Internal circuit as below, the NEC2501 is a photocoupler, the Active current (from NEC2501 pin 1 to pin 2 is 1ma and the max current is 50mA. When there is active current pass NEC2501 pin1 to pin2. The DI will be active high.
++
++
  )))
  )))
@@ -1275,10 +1275,10 @@
  )))
  * (((
--Connect sensor’s output to DI1-
++Connect sensor's output to DI1-
  )))
  * (((
--Connect sensor’s VCC to DI1+.
++Connect sensor's VCC to DI1+.
  )))
  (((
@@ -1286,15 +1286,17 @@
  )))
  (((
--[[image:1653968155772-850.png||height="23" width="19"]]**= DI1+ / 1K.**
++[[image:1653968155772-850.png||height="23" width="19"]]**= DI1**+** / 1K.**
  )))
  (((
--If DI1+ = 12v, the [[image:1653968155772-850.png||height="23" width="19"]]= 12mA , So the LT-22222-L will be able to detect this active signal.
++If** DI1+ **= **12v**, the [[image:1653968155772-850.png||height="23" width="19"]]= 12mA , So the LT-22222-L will be able to detect this active signal.
  )))
  (((
++
++
  )))
  (((
@@ -1306,10 +1306,10 @@
  )))
  * (((
--Connect sensor’s output to DI1+
++Connect sensor's output to DI1+
  )))
  * (((
--Connect sensor’s GND DI1-.
++Connect sensor's GND DI1-.
  )))
  (((
@@ -1326,6 +1326,8 @@
  (((
++
++
  )))
  (((
@@ -1337,10 +1337,10 @@
  )))
  * (((
--Connect sensor’s output to DI1+ with a serial 50K resistor
++Connect sensor's output to DI1+ with a serial 50K resistor
  )))
  * (((
--Connect sensor’s GND DI1-.
++Connect sensor's GND DI1-.
  )))
  (((
@@ -1359,6 +1359,7 @@
  === 3.6.3 Digital Output Port: DO1/DO2 /DO3 ===
++
  NPN output: GND or Float. Max voltage can apply to output pin is 36v.
  [[image:1653357531600-905.png]]
@@ -1367,6 +1367,7 @@
  === 3.6.4 Analog Input Interface ===
++
  The analog input interface is as below. The LT will measure the IN2 voltage so to calculate the current pass the Load. The formula is:
@@ -1379,13 +1379,13 @@
  We take the wind speed sensor as an example for reference only.
--**Specifications of the wind speed sensor:**
++(% style="color:blue" %)**Specifications of the wind speed sensor:**
--Red:      12~~24v
++**Red:      12~~24v**
--Yellow:  4~~20mA
++**Yellow:  4~~20mA**
--Black:   GND
++**Black:   GND**
  **Connection diagram:**
@@ -1398,6 +1398,7 @@
  === 3.6.5 Relay Output ===
++
  (((
  The LT serial controller has two relay interfaces; each interface uses two pins of the screw terminal. User can connect other device’s Power Line to in serial of RO1_1 and RO_2. Such as below:
  )))
@@ -1404,6 +1404,7 @@
  [[image:image-20220524100215-9.png]]
++
  [[image:image-20220524100215-10.png||height="382" width="723"]]
@@ -1410,6 +1410,7 @@
  == 3.7 LEDs Indicators ==
++
  [[image:image-20220524100748-11.png]]
@@ -1416,10 +1416,18 @@
  = 4. Use AT Command =
++
  == 4.1 Access AT Command ==
++
++(((
  LT supports AT Command set. User can use a USB to TTL adapter plus the 3.5mm Program Cable to connect to LT for using AT command, as below.
++)))
++(((
++
++)))
++
  [[image:1653358238933-385.png]]
@@ -1447,7 +1447,7 @@
  )))
  (((
--AT+<CMD>=?       : Get the value
++AT+<CMD>=?       :  Get the value
  )))
  (((
@@ -1475,11 +1475,11 @@
  )))
  (((
--AT+APPSKEY: Get or Set the Application Session Key
++AT+APPSKEY:  Get or Set the Application Session Key
  )))
  (((
--AT+APPEUI: Get or Set the Application EUI
++AT+APPEUI:    Get or Set the Application EUI
  )))
  (((
@@ -1491,7 +1491,7 @@
  )))
  (((
--AT+DR: Get or Set the Data Rate. (0-7 corresponding to DR_X)
++AT+DR:  Get or Set the Data Rate. (0-7 corresponding to DR_X)
  )))
  (((
@@ -1527,7 +1527,7 @@
  )))
  (((
--AT+NJM: Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
++AT+NJM:    Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
  )))
  (((
@@ -1571,7 +1571,7 @@
  )))
  (((
--AT+VER: Get current image version and Frequency Band
++AT+VER:  Get current image version and Frequency Band
  )))
  (((
@@ -1579,7 +1579,7 @@
  )))
  (((
--AT+CFS: Get confirmation status of the last AT+SEND (0-1)
++AT+CFS:  Get confirmation status of the last AT+SEND (0-1)
  )))
  (((
@@ -1622,45 +1622,48 @@
  == 4.2 Common AT Command Sequence ==
++
  === 4.2.1 Multi-channel ABP mode (Use with SX1301/LG308) ===
  (((
--**If device has not joined network yet:**
++(((
++(% style="color:blue" %)**If device has not joined network yet:**
  )))
++)))
  (((
--(% style="background-color:#dcdcdc" %)123456
++(% style="background-color:#dcdcdc" %)**123456**
  )))
  (((
--(% style="background-color:#dcdcdc" %)AT+FDR
++(% style="background-color:#dcdcdc" %)**AT+FDR**
  )))
  (((
--(% style="background-color:#dcdcdc" %)123456
++(% style="background-color:#dcdcdc" %)**123456**
  )))
  (((
--(% style="background-color:#dcdcdc" %)AT+NJM=0
++(% style="background-color:#dcdcdc" %)**AT+NJM=0**
  )))
  (((
--(% style="background-color:#dcdcdc" %)ATZ
++(% style="background-color:#dcdcdc" %)**ATZ**
  )))
  (((
--**If device already joined network:**
++(% style="color:blue" %)**If device already joined network:**
  )))
  (((
--(% style="background-color:#dcdcdc" %)AT+NJM=0
++(% style="background-color:#dcdcdc" %)**AT+NJM=0**
  )))
  (((
--(% style="background-color:#dcdcdc" %)ATZ
++(% style="background-color:#dcdcdc" %)**ATZ**
  )))
@@ -1670,55 +1670,57 @@
  (((
--(% style="background-color:#dcdcdc" %)123456(%%)     Enter Password to have AT access.
++(((
++(% style="background-color:#dcdcdc" %)**123456**(%%)        ~/~/ Enter Password to have AT access.
  )))
++)))
  (((
--(% style="background-color:#dcdcdc" %) AT+FDR(%%)   Reset Parameters to Factory Default, Keys Reserve
++(% style="background-color:#dcdcdc" %)** AT+FDR**(%%)     ~/~/ Reset Parameters to Factory Default, Keys Reserve
  )))
  (((
--(% style="background-color:#dcdcdc" %) 123456(%%)     Enter Password to have AT access.
++(% style="background-color:#dcdcdc" %)** 123456**(%%)       ~/~/ Enter Password to have AT access.
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+CLASS=C(%%) Set to work in CLASS C
++(% style="background-color:#dcdcdc" %)** AT+CLASS=C**(%%)   ~/~/ Set to work in CLASS C
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+NJM=0(%%)    Set to ABP mode
++(% style="background-color:#dcdcdc" %)** AT+NJM=0**(%%)     ~/~/ Set to ABP mode
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+ADR=0(%%)    Set the Adaptive Data Rate Off
++(% style="background-color:#dcdcdc" %) **AT+ADR=0**(%%)     ~/~/ Set the Adaptive Data Rate Off
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+DR=5(%%)       Set Data Rate
++(% style="background-color:#dcdcdc" %)** AT+DR=5**(%%)       ~/~/ Set Data Rate
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+TDC=60000(%%)              Set transmit interval to 60 seconds
++(% style="background-color:#dcdcdc" %)** AT+TDC=60000**(%%)              ~/~/ Set transmit interval to 60 seconds
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+CHS=868400000(%%)      Set transmit frequency to 868.4Mhz
++(% style="background-color:#dcdcdc" %)** AT+CHS=868400000**(%%)     ~/~/ Set transmit frequency to 868.4Mhz
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+RX2FQ=868400000(%%)  Set RX2Frequency to 868.4Mhz (according to the result from server)
++(% style="background-color:#dcdcdc" %)** AT+RX2FQ=868400000**(%%)    ~/~/ Set RX2Frequency to 868.4Mhz (according to the result from server)
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+RX2DR=5(%%)                  Set RX2DR to match the downlink DR from server. see below
++(% style="background-color:#dcdcdc" %)** AT+RX2DR=5**(%%)** **                   ~/~/ Set RX2DR to match the downlink DR from server. see below
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+DADDR=26 01 1A F1 (%%)  Set Device Address to 26 01 1A F1, this ID can be found in the LoRa Server portal.
++(% style="background-color:#dcdcdc" %)** AT+DADDR=26 01 1A F1** (%%)     ~/~/ Set Device Address to 26 01 1A F1, this ID can be found in the LoRa Server portal.
  )))
  (((
--(% style="background-color:#dcdcdc" %) ATZ         (%%)                             Reset MCU
++(% style="background-color:#dcdcdc" %)** ATZ**         (%%)                                 ~/~/ Reset MCU
  )))
@@ -1728,10 +1728,16 @@
  )))
  (((
--(% style="color:red" %)1. Make sure the device is set to ABP mode in the IoT Server.
--2. Make sure the LG01/02 gateway RX frequency is exactly the same as AT+CHS setting.
--3. Make sure SF / bandwidth setting in LG01/LG02 match the settings of AT+DR. refer [[this link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/&file=LoRaWAN%201.0.3%20Regional%20Parameters.xlsx]] to see what DR means.
--4. The command AT+RX2FQ and AT+RX2DR is to let downlink work. to set the correct parameters, user can check the actually downlink parameters to be used. As below. Which shows the RX2FQ should use 868400000 and RX2DR should be 5
++**~1. Make sure the device is set to ABP mode in the IoT Server.**
++
++**2. Make sure the LG01/02 gateway RX frequency is exactly the same as AT+CHS setting.**
++
++**3. Make sure SF / bandwidth setting in LG01/LG02 match the settings of AT+DR. refer [[this link>>url:http://www.dragino.com/downloads/index.php?
++dir=LoRa_Gateway/&file=LoRaWAN%201.0.3%20Regional%20Parameters.xlsx]] to see what DR means.**
++
++**4. The command AT+RX2FQ and AT+RX2DR is to let downlink work. to set the correct parameters, user can check the actually downlink parameters to be used. As below. Which shows the RX2FQ should use 868400000 and RX2DR should be 5**
++
++
  )))
  (((
@@ -1745,13 +1745,19 @@
  === 4.2.3 Change to Class A ===
--If sensor JOINED
--(% style="background-color:#dcdcdc" %)AT+CLASS=A
--ATZ
++(((
++(% style="color:blue" %)If sensor JOINED:
++(% style="background-color:#dcdcdc" %)**AT+CLASS=A
++ATZ**
++)))
++
++
++
  = 5. FAQ =
++
  == 5.1 How to upgrade the image? ==
@@ -1768,14 +1768,18 @@
  (((
  (% style="color:blue" %)**Step1**(%%)**:** Download [[flash loader>>url:https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/flasher-stm32.html]].
--(% style="color:blue" %)**Step2**(%%)**:** Download the [[LT Image files>>url:http://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/image/]].
++(% style="color:blue" %)**Step2**(%%)**:** Download the [[LT Image files>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AADKXQ2v5ZT-S3sxdmbvE7UAa/LT-22222-L/image?dl=0&subfolder_nav_tracking=1]].
  (% style="color:blue" %)**Step3**(%%)**:** Open flashloader; choose the correct COM port to update.
++(((
  (% style="color:blue" %)**For LT-22222-L**(%%):
--Hold down the PRO button and then momentarily press the RST reset button and the **DO1 led** will change from OFF to ON. When **DO1 LED** is on, it means the device is in download mode.
++Hold down the PRO button and then momentarily press the RST reset button and the (% style="color:red" %)**DO1 led**(%%) will change from OFF to ON. When (% style="color:red" %)**DO1 LED**(%%) is on, it means the device is in download mode.
  )))
++
++)))
++
    [[image:image-20220524103407-12.png]]
  [[image:image-20220524103429-13.png]]
@@ -1785,6 +1785,7 @@
  (% style="color:red" %)**Notice**(%%): In case user has lost the program cable. User can hand made one from a 3.5mm cable. The pin mapping is:
++
  [[image:1653360054704-518.png||height="186" width="745"]]
@@ -1793,6 +1793,8 @@
  == 5.2 How to change the LoRa Frequency Bands/Region? ==
++
++
  )))
  )))
@@ -1803,7 +1803,10 @@
  (((
++
  == 5.3 How to set up LT to work with Single Channel Gateway such as LG01/LG02? ==
++
++
  )))
  (((
@@ -1816,38 +1816,45 @@
  (((
  Assume we have a LG02 working in the frequency 868400000 now , below is the step.
++
  )))
  )))
  (((
--(% style="color:#4f81bd" %)**Step1**(%%): Log in TTN, Create an ABP device in the application and input the network session key (NETSKEY), app session key (APPSKEY) from the device.
++(% style="color:blue" %)**Step1**(%%):  Log in TTN, Create an ABP device in the application and input the network session key (NETSKEY), app session key (APPSKEY) from the device.
++
++
  )))
  (((
  [[image:1653360231087-571.png||height="401" width="727"]]
++
++
  )))
  (((
--(% style="color:red" %)Note: user just need to make sure above three keys match, User can change either in TTN or Device to make then match. In TTN, NETSKEY and APPSKEY can be configured by user in setting page, but Device Addr is generated by TTN.
++(% style="color:red" %)**Note: user just need to make sure above three keys match, User can change either in TTN or Device to make then match. In TTN, NETSKEY and APPSKEY can be configured by user in setting page, but Device Addr is generated by TTN.**
  )))
++
  (((
--(% style="color:#4f81bd" %)**Step2**(%%)**: **Run AT Command to make LT work in Single frequency & ABP mode. Below is the AT commands:
++(% style="color:blue" %)**Step2**(%%)**:  **Run AT Command to make LT work in Single frequency & ABP mode. Below is the AT commands:
++
++
  )))
  (((
--(% style="background-color:#dcdcdc" %)123456 (%%)     Enter Password to have AT access.
--(% style="background-color:#dcdcdc" %)AT+FDR(%%)     Reset Parameters to Factory Default, Keys Reserve
--(% style="background-color:#dcdcdc" %)123456 (%%)     Enter Password to have AT access.
--(% style="background-color:#dcdcdc" %)AT+NJM=0 (%%)    Set to ABP mode
--(% style="background-color:#dcdcdc" %)AT+ADR=0 (%%)    Set the Adaptive Data Rate Off
--(% style="background-color:#dcdcdc" %)AT+DR=5 (%%)      Set Data Rate (Set AT+DR=3 for 915 band)
--(% style="background-color:#dcdcdc" %)AT+TDC=60000 (%%)         Set transmit interval to 60 seconds
--(% style="background-color:#dcdcdc" %)AT+CHS=868400000(%%)  Set transmit frequency to 868.4Mhz
--(% style="background-color:#dcdcdc" %)AT+DADDR=26 01 1A F1(%%)    Set Device Address to 26 01 1A F1
--(% style="background-color:#dcdcdc" %)ATZ        (%%)                              Reset MCU
++(% style="background-color:#dcdcdc" %)**123456** (%%)   :   Enter Password to have AT access.
++(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)   :   Reset Parameters to Factory Default, Keys Reserve
++(% style="background-color:#dcdcdc" %)**AT+NJM=0** (%%) :   Set to ABP mode
++(% style="background-color:#dcdcdc" %)**AT+ADR=0** (%%)  :  Set the Adaptive Data Rate Off
++(% style="background-color:#dcdcdc" %)**AT+DR=5** (%%)    :   Set Data Rate (Set AT+DR=3 for 915 band)
++(% style="background-color:#dcdcdc" %)**AT+TDC=60000 **(%%)   :      Set transmit interval to 60 seconds
++(% style="background-color:#dcdcdc" %)**AT+CHS=868400000**(%%) : Set transmit frequency to 868.4Mhz
++(% style="background-color:#dcdcdc" %)**AT+DADDR=26 01 1A F1**(%%)  :  Set Device Address to 26 01 1A F1
++(% style="background-color:#dcdcdc" %)**ATZ**        (%%)                              :  Reset MCU
  )))
@@ -1858,16 +1858,21 @@
  [[image:1653360498588-932.png||height="485" width="726"]]
++
  == 5.4 Can I see counting event in Serial? ==
++
  (((
--User can run AT+DEBUG command to see the counting event in serial. If firmware too old and doesn’t support AT+DEBUG. User can update to latest firmware first.
++User can run AT+DEBUG command to see the counting event in serial. If firmware too old and doesn't support AT+DEBUG. User can update to latest firmware first.
++
  == 5.5 Can i use point to point communication for LT-22222-L? ==
++
  Yes, please refer [[Point to Point Communication>>doc:Main. Point to Point Communication of LT-22222-L.WebHome]]
++
  )))
@@ -1874,6 +1874,7 @@
  (((
  == 5.6 Why does the relay output become the default and open relay after the lt22222 is powered off? ==
++
  If the device is not shut down, but directly powered off.
  It will default that this is a power-off state.
@@ -1883,12 +1883,27 @@
  After restart, the status before power failure will be read from flash.
++
++== 5.7 Can i set up LT-22222-L as a NC(Normal Close) Relay? ==
++
++
++LT-22222-L built-in relay is NO (Normal Open). User can use an external relay to achieve Normal Close purpose. Diagram as below:
++
++
++[[image:image-20221006170630-1.png||height="610" width="945"]]
++
++
++
  = 6. Trouble Shooting =
++
++
  )))
  (((
  (((
--== 6.1 Downlink doesn’t work, how to solve it? ==
++== 6.1 Downlink doesn't work, how to solve it? ==
++
++
  )))
  )))
@@ -1899,7 +1899,10 @@
  (((
++
  == 6.2 Have trouble to upload image. ==
++
++
  )))
  (((
@@ -1909,7 +1909,10 @@
  (((
--== 6.3 Why I can’t join TTN in US915 /AU915 bands? ==
++
++== 6.3 Why I can't join TTN in US915 /AU915 bands? ==
++
++
  )))
  (((
@@ -1917,23 +1917,26 @@
  )))
++
  = 7. Order Info =
++
  (% style="color:#4f81bd" %)**LT-22222-L-XXX:**
--
  (% style="color:#4f81bd" %)**XXX:**
--* (% style="color:#4f81bd" %)**EU433**(%%): LT with frequency bands EU433
--* (% style="color:#4f81bd" %)**EU868**(%%): LT with frequency bands EU868
--* (% style="color:#4f81bd" %)**KR920**(%%): LT with frequency bands KR920
--* (% style="color:#4f81bd" %)**CN470**(%%): LT with frequency bands CN470
--* (% style="color:#4f81bd" %)**AS923**(%%): LT with frequency bands AS923
--* (% style="color:#4f81bd" %)**AU915**(%%): LT with frequency bands AU915
--* (% style="color:#4f81bd" %)**US915**(%%): LT with frequency bands US915
--* (% style="color:#4f81bd" %)**IN865**(%%): LT with frequency bands IN865
--* (% style="color:#4f81bd" %)**CN779**(%%): LT with frequency bands CN779
++* (% style="color:red" %)**EU433**(%%):   LT with frequency bands EU433
++* (% style="color:red" %)**EU868**(%%):   LT with frequency bands EU868
++* (% style="color:red" %)**KR920**(%%):   LT with frequency bands KR920
++* (% style="color:red" %)**CN470**(%%):  LT with frequency bands CN470
++* (% style="color:red" %)**AS923**(%%):   LT with frequency bands AS923
++* (% style="color:red" %)**AU915**(%%):  LT with frequency bands AU915
++* (% style="color:red" %)**US915**(%%):  LT with frequency bands US915
++* (% style="color:red" %)**IN865**(%%):   LT with frequency bands IN865
++* (% style="color:red" %)**CN779**(%%):  LT with frequency bands CN779
++
++
  = 8. Packing Info =
@@ -1951,8 +1951,11 @@
  * Package Size / pcs : 14.5 x 8 x 5 cm
  * Weight / pcs : 170g
++
++
  = 9. Support =
++
  * (((
  Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
  )))
@@ -1966,7 +1966,7 @@
  = 10. Reference =
++
  * LT-22222-L: [[http:~~/~~/www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]]
--* [[Image Download>>url:http://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/image/]]
--* [[AT Command Manual>>url:http://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/]]
++* [[Datasheet, Document Base>>https://www.dropbox.com/sh/gxxmgks42tqfr3a/AACEdsj_mqzeoTOXARRlwYZ2a?dl=0]]
  * [[Hardware Source>>url:https://github.com/dragino/Lora/tree/master/LT/LT-33222-L/v1.0]]

image-20220714135731-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bei

Size

...	...	@@ -1,0 +1,1 @@
	1	+54.1 KB

Content

image-20220719105525-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bei

Size

...	...	@@ -1,0 +1,1 @@
	1	+165.5 KB

Content

image-20220719110247-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bei

Size

...	...	@@ -1,0 +1,1 @@
	1	+52.9 KB

Content

image-20221006170630-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+486.5 KB

Content

image-20221008095908-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bei

Size

...	...	@@ -1,0 +1,1 @@
	1	+41.8 KB

Content

Changes for page LT-22222-L -- LoRa I/O Controller User Manual

Summary

Details

Applications

Navigation