Changes for page LT-22222-L -- LoRa I/O Controller User Manual

Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 3 added, 0 removed)
  • image-20220714135731-1.png
  • image-20220719105525-1.png
  • image-20220719110247-2.png

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Bei
	1	+XWiki.Xiaoling

Content

...	...	@@ -1,7 +1,6 @@
1	1	(% style="text-align:center" %)
2	2	[[image:image-20220523163353-1.jpeg||height="604" width="500"]]
3	3
4		-**LT-22222-L LoRa IO Controller User Manual **
5	5
6	6
7	7	**Table of Contents:**
...	...	@@ -16,6 +16,7 @@
16	16
17	17	= 1.Introduction =
18	18
	18	+
19	19	== 1.1 What is LT Series I/O Controller ==
20	20
21	21	(((
...	...	@@ -37,11 +37,13 @@
37	37	)))
38	38
39	39	(((
40		-1) If user’s area has LoRaWAN service coverage, they can just install the I/O controller and configure it to connect the LoRaWAN provider via wireless.
	40	+1) If user's area has LoRaWAN service coverage, they can just install the I/O controller and configure it to connect the LoRaWAN provider via wireless.
41	41	)))
42	42
43	43	(((
44	44	2) User can set up a LoRaWAN gateway locally and configure the controller to connect to the gateway via wireless.
	45	+
	46	+
45	45	)))
46	46
47	47	(((
...	...	@@ -56,7 +56,7 @@
56	56	(((
57	57
58	58
59		-**Hardware System:**
	61	+(% style="color:#037691" %)**Hardware System:**
60	60	)))
61	61
62	62	* (((
...	...	@@ -81,7 +81,7 @@
81	81	(((
82	82
83	83
84		-**Interface for Model: LT22222-L:**
	86	+(% style="color:#037691" %)**Interface for Model: LT22222-L:**
85	85	)))
86	86
87	87	* (((
...	...	@@ -106,7 +106,7 @@
106	106	(((
107	107
108	108
109		-**LoRa Spec:**
	111	+(% style="color:#037691" %)**LoRa Spec:**
110	110	)))
111	111
112	112	* (((
...	...	@@ -173,9 +173,10 @@
173	173
174	174	== 1.3 Features ==
175	175
	178	+
176	176	* LoRaWAN Class A & Class C protocol
177	177	* Optional Customized LoRa Protocol
178		-* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/RU864/IN865
	181	+* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/RU864/IN865/MA869
179	179	* AT Commands to change parameters
180	180	* Remote configure parameters via LoRa Downlink
181	181	* Firmware upgradable via program port
...	...	@@ -182,8 +182,11 @@
182	182	* Counting
183	183
184	184
	188	+
	189	+
185	185	== 1.4  Applications ==
186	186
	192	+
187	187	* Smart Buildings & Home Automation
188	188	* Logistics and Supply Chain Management
189	189	* Smart Metering
...	...	@@ -192,8 +192,11 @@
192	192	* Smart Factory
193	193
194	194
	201	+
	202	+
195	195	== 1.5 Hardware Variants ==
196	196
	205	+
197	197	(% border="1" style="background-color:#f7faff; width:500px" %)
198	198	|(% style="width:103px" %)**Model**|(% style="width:131px" %)**Photo**|(% style="width:334px" %)**Description**
199	199	|(% style="width:103px" %)**LT22222-L**|(% style="width:131px" %)[[image:1653296302983-697.png]]|(% style="width:334px" %)(((
...	...	@@ -205,12 +205,18 @@
205	205	* 1 x Counting Port
206	206	)))
207	207
	217	+
	218	+
	219	+
208	208	= 2. Power ON Device =
209	209
	222	+
210	210	The LT controller can be powered by 7 ~~ 24V DC power source. Connect VIN to Power Input V+ and GND to power input V- to power the LT controller.
211	211
212	212	(((
213	213	PWR will on when device is properly powered.
	227	+
	228	+
214	214	)))
215	215
216	216	[[image:1653297104069-180.png]]
...	...	@@ -219,21 +219,27 @@
219	219
220	220	= 3. Operation Mode =
221	221
	237	+
222	222	== 3.1 How it works? ==
223	223
	240	+
224	224	(((
225		-The LT is configured as LoRaWAN OTAA Class C mode by default. It has OTAA keys to join network. To connect a local LoRaWAN network, user just need to input the OTAA keys in the network server and power on the LT. It will auto join the network via OTAA. For LT-22222-L, the LED will show the Join status: After power on **TX LED** will fast blink 5 times, LT-22222-L will enter working mode and start to JOIN LoRaWAN network. **TX LED** will be on for 5 seconds after joined in network. When there is message from server, the **RX LED** will be on for 1 second.
	242	+The LT is configured as LoRaWAN OTAA Class C mode by default. It has OTAA keys to join network. To connect a local LoRaWAN network, user just need to input the OTAA keys in the network server and power on the LT. It will auto join the network via OTAA. For LT-22222-L, the LED will show the Join status: After power on (% style="color:green" %)**TX LED**(%%) will fast blink 5 times, LT-22222-L will enter working mode and start to JOIN LoRaWAN network. (% style="color:green" %)**TX LED**(%%) will be on for 5 seconds after joined in network. When there is message from server, the RX LED will be on for 1 second.
226	226	)))
227	227
228	228	(((
229		-In case user can’t set the OTAA keys in the network server and has to use the existing keys from server. User can [[use AT Command>>||anchor="H4.UseATCommand"]] to set the keys in the devices.
	246	+In case user can't set the OTAA keys in the network server and has to use the existing keys from server. User can [[use AT Command>>||anchor="H4.UseATCommand"]] to set the keys in the devices.
230	230	)))
231	231
232	232
	250	+
233	233	== 3.2 Example to join LoRaWAN network ==
234	234
	253	+
235	235	(((
236	236	This chapter shows an example for how to join the TTN LoRaWAN Network. Below is the network structure, we use our LG308 as LoRaWAN gateway here.
	256	+
	257	+
237	237	)))
238	238
239	239	[[image:image-20220523172350-1.png||height="266" width="864"]]
...	...	@@ -241,6 +241,8 @@
241	241
242	242	(((
243	243	The LG308 is already set to connect to [[TTN network >>url:https://www.thethingsnetwork.org/]]. So what we need to do now is only configure register this device to TTN:
	265	+
	266	+
244	244	)))
245	245
246	246	(((
...	...	@@ -266,6 +266,7 @@
266	266	[[image:1653298023685-319.png]]
267	267
268	268
	292	+
269	269	(((
270	270	(% style="color:blue" %)**Step 2**(%%): Power on LT and it will auto join to the TTN network. After join success, it will start to upload message to TTN and user can see in the panel.
271	271	)))
...	...	@@ -276,19 +276,22 @@
276	276
277	277	== 3.3 Uplink Payload ==
278	278
	303	+
279	279	There are five working modes + one interrupt mode on LT for different type application:
280	280
281		-* **MOD1**: (default setting): 2 x ACI + 2AVI + DI + DO + RO
282		-* **MOD2**: Double DI Counting + DO + RO
283		-* **MOD3**: Single DI Counting + 2 x ACI + DO + RO
284		-* **MOD4**: Single DI Counting + 1 x Voltage Counting + DO + RO
285		-* **MOD5**: Single DI Counting + 2 x AVI + 1 x ACI + DO + RO
286		-* **ADDMOD6**: Trigger Mode, Optional, used together with MOD1 ~~ MOD5
	306	+* (% style="color:blue" %)**MOD1**(%%): (default setting): 2 x ACI + 2AVI + DI + DO + RO
	307	+* (% style="color:blue" %)**MOD2**(%%): Double DI Counting + DO + RO
	308	+* (% style="color:blue" %)**MOD3**(%%): Single DI Counting + 2 x ACI + DO + RO
	309	+* (% style="color:blue" %)**MOD4**(%%): Single DI Counting + 1 x Voltage Counting + DO + RO
	310	+* (% style="color:blue" %)**MOD5**(%%): Single DI Counting + 2 x AVI + 1 x ACI + DO + RO
	311	+* (% style="color:blue" %)**ADDMOD6**(%%): Trigger Mode, Optional, used together with MOD1 ~~ MOD5
287	287
288	288
289	289
	315	+
290	290	=== 3.3.1 AT+MOD~=1, 2ACI+2AVI ===
291	291
	318	+
292	292	The uplink payload includes totally 9 bytes. Uplink packets use FPORT=2 and every 10 minutes send one uplink by default.
293	293
294	294	[[image:image-20220523174024-3.png]]
...	...	@@ -305,8 +305,10 @@
305	305	* DI is for digital input. DIx=1: high or float, DIx=0: low.
306	306	* DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
307	307
308		-(% style="color:red" %)Note: DI3 and DO3 bit are not valid for LT-22222-L
309	309
	336	+
	337	+(% style="color:red" %)**Note: DI3 and DO3 bit are not valid for LT-22222-L**
	338	+
310	310	For example if payload is: [[image:image-20220523175847-2.png]]
311	311
312	312
...	...	@@ -325,6 +325,8 @@
325	325	* [1] RO1 relay channel is close and the RO1 LED is ON.
326	326	* [0] RO2 relay channel is open and RO2 LED is OFF;
327	327
	357	+
	358	+
328	328	**LT22222-L:**
329	329
330	330	* [1] DI2 channel is high input and DI2 LED is ON;
...	...	@@ -342,6 +342,8 @@
342	342
343	343
344	344
	376	+
	377	+
345	345	=== 3.3.2 AT+MOD~=2, (Double DI Counting) ===
346	346
347	347
...	...	@@ -365,7 +365,7 @@
365	365	* DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
366	366
367	367	(((
368		-(% style="color:red" %)Note: DO3 bit is not valid for LT-22222-L.
	401	+(% style="color:red" %)**Note: DO3 bit is not valid for LT-22222-L.**
369	369	)))
370	370
371	371	(((
...	...	@@ -387,6 +387,8 @@
387	387
388	388
389	389	(% style="color:#4f81bd" %)**AT Commands for counting:**
	423	+
	424	+
390	390	)))
391	391
392	392	(((
...	...	@@ -410,11 +410,14 @@
410	410
411	411	=== 3.3.3 AT+MOD~=3, Single DI Counting + 2 x ACI ===
412	412
	448	+
413	413	**LT22222-L**: This mode the DI1 is used as a counting pin.
414	414
415	415	[[image:image-20220523181246-5.png]]
416	416
417	417	(((
	454	+
	455	+
418	418	(% style="color:#4f81bd" %)**DIDORO**(%%) is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1. Totally 1bytes as below
419	419	)))
420	420
...	...	@@ -425,9 +425,10 @@
425	425	* DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
426	426
427	427	(((
428		-(% style="color:red" %)Note: DO3 is not valid for LT-22222-L.
	466	+(% style="color:red" %)**Note: DO3 is not valid for LT-22222-L.**
429	429	)))
430	430
	469	+
431	431	(((
432	432	**To use counting mode, please run:**
433	433	)))
...	...	@@ -468,7 +468,7 @@
468	468	* DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
469	469
470	470	(((
471		-(% style="color:red" %)Note: DO3 is not valid for LT-22222-L.
	510	+(% style="color:red" %)**Note: DO3 is not valid for LT-22222-L.**
472	472	)))
473	473
474	474	(((
...	...	@@ -529,7 +529,7 @@
529	529	)))
530	530
531	531	(((
532		-(% style="color:red" %)Note: DO3 is not valid for LT-22222-L.
	571	+(% style="color:red" %)**Note: DO3 is not valid for LT-22222-L.**
533	533	)))
534	534
535	535	(((
...	...	@@ -560,20 +560,27 @@
560	560
561	561	For example, if user has configured below commands:
562	562
563		-* **AT+MOD=1 ** **~-~->** The normal working mode
564		-* **AT+ADDMOD6=1**   **~-~->** Enable trigger
	602	+* **AT+MOD=1 ** **~-~->**  The normal working mode
	603	+* **AT+ADDMOD6=1**   **~-~->**  Enable trigger
565	565
	605	+
	606	+
566	566	LT will keep monitoring AV1/AV2/AC1/AC2 every 5 seconds; LT will send uplink packets in two cases:
567	567
568	568	1. Periodically uplink (Base on TDC time). Payload is same as the normal MOD (MOD 1 for above command). This uplink uses LoRaWAN (% style="color:#4f81bd" %)**unconfirmed**(%%) data type
569	569	1. Trigger uplink when meet the trigger condition. LT will sent two packets in this case, the first uplink use payload specify in this mod (mod=6), the second packets use the normal mod payload(MOD=1 for above settings). Both Uplinks use LoRaWAN (% style="color:#4f81bd" %)**CONFIRMED data type.**
570	570
	612	+
	613	+
	614	+
571	571	(% style="color:#037691" %)**AT Command to set Trigger Condition**:
572	572
	617	+
573	573	(% style="color:#4f81bd" %)**Trigger base on voltage**:
574	574
575	575	Format: AT+AVLIM=<AV1_LIMIT_LOW>,< AV1_LIMIT_HIGH>,<AV2_LIMIT_LOW>,< AV2_LIMIT_HIGH>
576	576
	622	+
577	577	**Example:**
578	578
579	579	AT+AVLIM=3000,6000,0,2000   (If AVI1 voltage lower than 3v or higher than 6v. or AV2 voltage is higher than 2v, LT will trigger Uplink)
...	...	@@ -586,6 +586,7 @@
586	586
587	587	Format: AT+ACLIM=<AC1_LIMIT_LOW>,< AC1_LIMIT_HIGH>,<AC2_LIMIT_LOW>,< AC2_LIMIT_HIGH>
588	588
	635	+
589	589	**Example:**
590	590
591	591	AT+ACLIM=10000,15000,0,0   (If ACI1 voltage lower than 10mA or higher than 15mA, trigger an uplink)
...	...	@@ -604,6 +604,7 @@
604	604	AT+ DTRI =1,0   (Enable DI1 trigger / disable DI2 trigger)
605	605
606	606
	654	+
607	607	(% style="color:#037691" %)**Downlink Command to set Trigger Condition:**
608	608
609	609	Type Code: 0xAA. Downlink command same as AT Command **AT+AVLIM, AT+ACLIM**
...	...	@@ -647,11 +647,14 @@
647	647
648	648	* Each bits shows if the corresponding trigger has been configured.
649	649
	698	+
	699	+
650	650	**Example:**
651	651
652	652	10100000: Means the system has configure to use the trigger: AC1_LOW and AV2_LOW
653	653
654	654
	705	+
655	655	(% style="color:#4f81bd" %)**TRI Status1**(%%) is a combination to show which condition is trigger. Totally 1byte as below
656	656
657	657	[[image:image-20220524090249-3.png]]
...	...	@@ -658,11 +658,14 @@
658	658
659	659	* Each bits shows which status has been trigger on this uplink.
660	660
	712	+
	713	+
661	661	**Example:**
662	662
663	663	10000000: Means this packet is trigger by AC1_LOW. Means voltage too low.
664	664
665	665
	719	+
666	666	(% style="color:#4f81bd" %)**TRI_DI FLAG+STA **(%%)is a combination to show which condition is trigger. Totally 1byte as below
667	667
668	668	[[image:image-20220524090456-4.png]]
...	...	@@ -669,6 +669,8 @@
669	669
670	670	* Each bits shows which status has been trigger on this uplink.
671	671
	726	+
	727	+
672	672	**Example:**
673	673
674	674	00000111: Means both DI1 and DI2 trigger are enabled and this packet is trigger by DI1.
...	...	@@ -676,6 +676,7 @@
676	676	00000101: Means both DI1 and DI2 trigger are enabled.
677	677
678	678
	735	+
679	679	(% style="color:#4f81bd" %)**Enable/Disable MOD6 **(%%): 0x01: MOD6 is enable. 0x00: MOD6 is disable.
680	680
681	681	Downlink command to poll MOD6 status:
...	...	@@ -686,19 +686,20 @@
686	686
687	687
688	688
	746	+
689	689	=== 3.3.7 Payload Decoder ===
690	690
691	691	(((
692	692
693	693
694		-**Decoder for TTN/loraserver/ChirpStack**: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/Payload_decoder/>>url:http://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/Payload_decoder/]]
695		-
696		-
	752	+**Decoder for TTN/loraserver/ChirpStack**:  [[https:~~/~~/www.dropbox.com/sh/wtrzu7avdtkmn3z/AACK5NwOMkU9jnvf1uCMuqrVa?dl=0>>https://www.dropbox.com/sh/wtrzu7avdtkmn3z/AACK5NwOMkU9jnvf1uCMuqrVa?dl=0]]
697	697	)))
698	698
699	699
	756	+
700	700	== 3.4 ​Configure LT via AT or Downlink ==
701	701
	759	+
702	702	User can configure LT I/O Controller via AT Commands or LoRaWAN Downlink Commands
703	703
704	704	(((
...	...	@@ -711,8 +711,10 @@
711	711
712	712
713	713
	772	+
714	714	=== 3.4.1 Common Commands ===
715	715
	775	+
716	716	They should be available for each of Dragino Sensors, such as: change uplink interval, reset device. For firmware v1.5.4, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
717	717
718	718
...	...	@@ -719,8 +719,10 @@
719	719
720	720	=== 3.4.2 Sensor related commands ===
721	721
	782	+
722	722	==== 3.4.2.1 Set Transmit Interval ====
723	723
	785	+
724	724	Set device uplink interval.
725	725
726	726	* (% style="color:#037691" %)**AT Command:**
...	...	@@ -740,6 +740,7 @@
740	740
741	741	==== 3.4.2.2 Set Work Mode (AT+MOD) ====
742	742
	805	+
743	743	Set work mode.
744	744
745	745	* (% style="color:#037691" %)**AT Command:**
...	...	@@ -759,6 +759,7 @@
759	759
760	760	==== 3.4.2.3 Poll an uplink ====
761	761
	825	+
762	762	* (% style="color:#037691" %)**AT Command:**
763	763
764	764	There is no AT Command to poll uplink
...	...	@@ -768,12 +768,15 @@
768	768
769	769	**0x08 FF     **~/~/ Poll an uplink
770	770
	835	+
771	771	**Example**: 0x08FF, ask device to send an Uplink
772	772
773	773
774	774
	840	+
775	775	==== 3.4.2.4 Enable Trigger Mode ====
776	776
	843	+
777	777	Use of trigger mode, please check [[ADDMOD6>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
778	778
779	779	* (% style="color:#037691" %)**AT Command:**
...	...	@@ -794,6 +794,7 @@
794	794
795	795	==== 3.4.2.5 Poll trigger settings ====
796	796
	864	+
797	797	Poll trigger settings,
798	798
799	799	* (% style="color:#037691" %)**AT Command:**
...	...	@@ -810,6 +810,7 @@
810	810
811	811	==== 3.4.2.6 Enable / Disable DI1/DI2/DI3 as trigger ====
812	812
	881	+
813	813	Enable Disable DI1/DI2/DI2 as trigger,
814	814
815	815	* (% style="color:#037691" %)**AT Command:**
...	...	@@ -830,6 +830,7 @@
830	830
831	831	==== 3.4.2.7 Trigger1 – Set DI1 or DI3 as trigger ====
832	832
	902	+
833	833	Set DI1 or DI3(for LT-33222-L) trigger.
834	834
835	835	* (% style="color:#037691" %)**AT Command:**
...	...	@@ -849,8 +849,12 @@
849	849	* (% style="color:#037691" %)**Downlink Payload (prefix 0x09 01 ):**
850	850	* **0x09 01 aa bb cc    ** ~/~/ same as AT+TRIG1=aa,0x(bb cc)
851	851
	922	+
	923	+
	924	+
852	852	==== 3.4.2.8 Trigger2 – Set DI2 as trigger ====
853	853
	927	+
854	854	Set DI2 trigger.
855	855
856	856	* (% style="color:#037691" %)**AT Command:**
...	...	@@ -877,6 +877,7 @@
877	877
878	878	==== 3.4.2.9 Trigger – Set AC (current) as trigger ====
879	879
	954	+
880	880	Set current trigger , base on AC port. See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
881	881
882	882	* (% style="color:#037691" %)**AT Command**
...	...	@@ -893,6 +893,7 @@
893	893
894	894	==== 3.4.2.10 Trigger – Set AV (voltage) as trigger ====
895	895
	971	+
896	896	Set current trigger , base on AV port. See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
897	897
898	898	* (% style="color:#037691" %)**AT Command**
...	...	@@ -909,6 +909,7 @@
909	909
910	910	==== 3.4.2.11 Trigger – Set minimum interval ====
911	911
	988	+
912	912	Set AV and AC trigger minimum interval, system won't response to the second trigger within this set time after the first trigger.
913	913
914	914	* (% style="color:#037691" %)**AT Command**
...	...	@@ -923,13 +923,15 @@
923	923	(((
924	924
925	925
926		-(% style="color:red" %)Note: ATDC setting must be more than 5min
	1003	+(% style="color:red" %)**Note: ATDC setting must be more than 5min**
927	927	)))
928	928
929	929
930	930
	1008	+
931	931	==== 3.4.2.12 DO ~-~- Control Digital Output DO1/DO2/DO3 ====
932	932
	1011	+
933	933	* (% style="color:#037691" %)**AT Command**
934	934
935	935	There is no AT Command to control Digital Output
...	...	@@ -949,11 +949,11 @@
949	949	[[image:image-20220524092754-5.png]]
950	950
951	951	(((
952		-(% style="color:red" %)Note: For LT-22222-L, there is no DO3, the last byte can use any value.
	1031	+(% style="color:red" %)**Note: For LT-22222-L, there is no DO3, the last byte can use any value.**
953	953	)))
954	954
955	955	(((
956		-(% style="color:red" %)Device will upload a packet if downlink code executes successfully.
	1035	+(% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
957	957	)))
958	958
959	959
...	...	@@ -961,6 +961,7 @@
961	961
962	962	==== 3.4.2.13 DO ~-~- Control Digital Output DO1/DO2/DO3 with time control ====
963	963
	1043	+
964	964	* (% style="color:#037691" %)**AT Command**
965	965
966	966	There is no AT Command to control Digital Output
...	...	@@ -997,11 +997,11 @@
997	997	[[image:image-20220524093351-8.png]]
998	998
999	999
1000		-(% style="color:#4f81bd" %)**Sixth and Seventh Byte**:
	1080	+(% style="color:#4f81bd" %)**Sixth and Seventh and Eighth and Ninth Byte**:
1001	1001
1002	1002	Latching time. Unit: ms
1003	1003
1004		-Device will upload a packet if downlink code executes successfully.
	1084	+(% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
1005	1005
1006	1006
1007	1007	**Example payload:**
...	...	@@ -1027,6 +1027,7 @@
1027	1027
1028	1028	==== 3.4.2.14 Relay ~-~- Control Relay Output RO1/RO2 ====
1029	1029
	1110	+
1030	1030	* (% style="color:#037691" %)**AT Command:**
1031	1031
1032	1032	There is no AT Command to control Relay Output
...	...	@@ -1049,7 +1049,7 @@
1049	1049	[[image:image-20220524093724-9.png]]
1050	1050	)))
1051	1051
1052		-Device will upload a packet if downlink code executes successfully.
	1133	+(% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
1053	1053
1054	1054
1055	1055
...	...	@@ -1056,6 +1056,7 @@
1056	1056
1057	1057	==== 3.4.2.15 Relay ~-~- Control Relay Output RO1/RO2 with time control ====
1058	1058
	1140	+
1059	1059	* (% style="color:#037691" %)**AT Command:**
1060	1060
1061	1061	There is no AT Command to control Relay Output
...	...	@@ -1079,37 +1079,37 @@
1079	1079
1080	1080	(% style="color:#4f81bd" %)**Third Byte(bb)**(%%): Control Method and Ports status:
1081	1081
1082		-[[image:image-20220524093831-10.png]]
	1164	+[[image:image-20220714135731-1.png||height="406" width="627"]]
1083	1083
1084	1084
1085		-(% style="color:#4f81bd" %)**Fourth/Fifth Bytes(cc)**(%%): Latching time. Unit: ms
	1167	+(% style="color:#4f81bd" %)**Fourth/Fifth/Sixth/Seventh Bytes(cc)**(%%): Latching time. Unit: ms
1086	1086
1087		-Device will upload a packet if downlink code executes successfully.
	1169	+(% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
1088	1088
1089	1089
1090	1090	**Example payload:**
1091	1091
1092		-**~1. 05 01 11 07 D0**
	1174	+**~1. 05 01 11 07 D**
1093	1093
1094		-Relay1 and Relay 2 will be set to NO , last 2 seconds, then change back to original state.
	1176	+Relay1 and Relay 2 will be set to NC , last 2 seconds, then change back to original state.
1095	1095
1096	1096	**2. 05 01 10 07 D0**
1097	1097
1098		-Relay1 will change to NO, Relay2 will change to NC, last 2 seconds, then both change back to original state.
	1180	+Relay1 will change to NC, Relay2 will change to NO, last 2 seconds, then both change back to original state.
1099	1099
1100	1100	**3. 05 00 01 07 D0**
1101	1101
1102		-Relay1 will change to NC, Relay2 will change to NO, last 2 seconds, then relay change to NO, Relay2 change to NC.
	1184	+Relay1 will change to NO, Relay2 will change to NC, last 2 seconds, then relay change to NC,Relay2 change to NO.
1103	1103
1104	1104	**4. 05 00 00 07 D0**
1105	1105
1106		-Relay 1 & relay2 will change to NC, last 2 seconds, then both change to NO.
	1188	+Relay 1 & relay2 will change to NO, last 2 seconds, then both change to NC.
1107	1107
1108	1108
1109	1109
1110		-
1111	1111	==== 3.4.2.16 Counting ~-~- Voltage threshold counting ====
1112	1112
	1194	+
1113	1113	When voltage exceed the threshold, count. Feature see [[MOD4>>||anchor="H3.3.4AT2BMOD3D42CSingleDICounting2B1xVoltageCounting"]]
1114	1114
1115	1115	* (% style="color:#037691" %)**AT Command:**
...	...	@@ -1126,6 +1126,7 @@
1126	1126
1127	1127	==== 3.4.2.17 Counting ~-~- Pre-configure the Count Number ====
1128	1128
	1211	+
1129	1129	* (% style="color:#037691" %)**AT Command:**
1130	1130
1131	1131	**AT+SETCNT=aa,(bb cc dd ee) **
...	...	@@ -1148,6 +1148,7 @@
1148	1148
1149	1149	==== 3.4.2.18 Counting ~-~- Clear Counting ====
1150	1150
	1234	+
1151	1151	Clear counting for counting mode
1152	1152
1153	1153	* (% style="color:#037691" %)**AT Command:**
...	...	@@ -1164,6 +1164,7 @@
1164	1164
1165	1165	==== 3.4.2.19 Counting ~-~- Change counting mode save time ====
1166	1166
	1251	+
1167	1167	* (% style="color:#037691" %)**AT Command:**
1168	1168
1169	1169	**AT+COUTIME=60  **~/~/ Set save time to 60 seconds. Device will save the counting result in internal flash every 60 seconds. (min value: 30)
...	...	@@ -1176,13 +1176,124 @@
1176	1176	(((
1177	1177	range: aa bb cc:0 to 16777215,  (unit:second)
1178	1178
	1264	+
	1265	+
1179	1179
1180	1180	)))
1181	1181
	1269	+==== 3.4.2.20 Reset save DR DO state ====
1182	1182
1183	1183
	1272	+* (% style="color:#037691" %)**AT Command:**
	1273	+
	1274	+**AT+RODORET=1  **~/~/ RODO will close when the device joining the network. (default)
	1275	+
	1276	+**AT+RODORET=0  **~/~/After the device is reset, the previously saved RODO state (only MOD2 to MOD5) is read, and its state is not changed when it is reconnected to the network.
	1277	+
	1278	+
	1279	+* (% style="color:#037691" %)**Downlink Payload (prefix 0xAD):**
	1280	+
	1281	+**0x AD aa      **~/~/ same as AT+RODORET =aa
	1282	+
	1283	+(((
	1284	+
	1285	+
	1286	+
	1287	+
	1288	+==== 3.4.2.21 Encrypted payload ====
	1289	+
	1290	+
	1291	+* (% style="color:#037691" %)**AT Command:**
	1292	+
	1293	+**AT+DECRYPT=1  **~/~/ The payload is uploaded without encryption
	1294	+
	1295	+**AT+DECRYPT=0  **~/~/Encrypt when uploading payload (default)
	1296	+
	1297	+
	1298	+
	1299	+
	1300	+==== 3.4.2.22 Get sensor value ====
	1301	+
	1302	+
	1303	+* (% style="color:#037691" %)**AT Command:**
	1304	+
	1305	+**AT+GETSENSORVALUE=0  **~/~/ The serial port gets the reading of the current sensor
	1306	+
	1307	+**AT+GETSENSORVALUE=1  **~/~/The serial port gets the current sensor reading and uploads it.
	1308	+
	1309	+
	1310	+
	1311	+
	1312	+==== 3.4.2.23 Resets the downlink packet count ====
	1313	+
	1314	+
	1315	+* (% style="color:#037691" %)**AT Command:**
	1316	+
	1317	+**AT+DISFCNTCHECK=0  **~/~/ When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node will no longer receive downlink packets (default)
	1318	+
	1319	+**AT+DISFCNTCHECK=1  **~/~/When the downlink packet count sent by the server is less than the node downlink packet count or exceeds 16384, the node resets the downlink packet count and keeps it consistent with the server downlink packet count.
	1320	+
	1321	+
	1322	+
	1323	+
	1324	+==== 3.4.2.24 When the limit bytes are exceeded, upload in batches ====
	1325	+
	1326	+
	1327	+* (% style="color:#037691" %)**AT Command:**
	1328	+
	1329	+ **AT+DISMACANS=0**  ~/~/ When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of 11 bytes (DR0 of US915, DR2 of AS923, DR2 of AU195), the node will send a packet with a payload of 00 and a port of 4. (default)
	1330	+
	1331	+ **AT+DISMACANS=1**      ~/~/ When the MACANS of the reply server plus the payload exceeds the maximum number of bytes of the DR, the node will ignore the MACANS and not reply, and only upload the payload part.
	1332	+
	1333	+
	1334	+* (% style="color:#037691" %)**Downlink Payload **(%%)**:**
	1335	+
	1336	+**0x21 00 01 ** ~/~/ Set  the DISMACANS=1
	1337	+
	1338	+
	1339	+
	1340	+
	1341	+==== 3.4.2.25 Copy downlink to uplink ====
	1342	+
	1343	+
	1344	+* (% style="color:#037691" %)**AT Command**(%%)**:**
	1345	+
	1346	+ **AT+RPL=5**  ~/~/ After receiving the package from the server, it will immediately upload the content of the package to the server, the port number is 100.
	1347	+
	1348	+Example：**aa xx xx xx xx**         ~/~/ aa indicates whether the configuration has changed, 00 is yes, 01 is no; xx xx xx xx are the bytes sent.
	1349	+
	1350	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173747-6.png?width=1124&height=165&rev=1.1||alt="image-20220823173747-6.png"]]
	1351	+
	1352	+For example, sending 11 22 33 44 55 66 77 will return invalid configuration 00 11 22 33 44 55 66 77.
	1353	+
	1354	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173833-7.png?width=1124&height=149&rev=1.1||alt="image-20220823173833-7.png"]]
	1355	+
	1356	+For example, if 01 00 02 58 is issued, a valid configuration of 01 01 00 02 58 will be returned.
	1357	+
	1358	+
	1359	+
	1360	+==== 3.4.2.26 Query version number and frequency band 、TDC ====
	1361	+
	1362	+
	1363	+* (((
	1364	+(% style="color:#037691" %)**Downlink Payload**(%%)**:**
	1365	+
	1366	+**26 01  ** ~/~/ Downlink 26 01 can query device upload frequency, frequency band, software version number, TDC time.
	1367	+
	1368	+
	1369	+)))
	1370	+
	1371	+**Example：**
	1372	+
	1373	+[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823173929-8.png?width=1205&height=76&rev=1.1||alt="image-20220823173929-8.png"]]
	1374	+
	1375	+
	1376	+
	1377	+)))
	1378	+
1184	1184	== 3.5 Integrate with Mydevice ==
1185	1185
	1381	+
1186	1186	Mydevices provides a human friendly interface to show the sensor data, once we have data in TTN, we can use Mydevices to connect to TTN and see the data in Mydevices. Below are the steps:
1187	1187
1188	1188	(((
...	...	@@ -1191,14 +1191,15 @@
1191	1191
1192	1192	(((
1193	1193	(% style="color:blue" %)**Step 2**(%%): To configure the Application to forward data to Mydevices you will need to add integration. To add the Mydevices integration, perform the following steps:
	1390	+
	1391	+
1194	1194	)))
1195	1195
1196		-[[image:1653356737703-362.png||height="232" width="732"]]
	1394	+[[image:image-20220719105525-1.png||height="377" width="677"]]
1197	1197
1198		-[[image:image-20220524094641-11.png||height="390" width="723"]]
1199	1199
1200	1200
1201		-[[image:image-20220524094641-12.png||height="402" width="718"]]
	1398	+[[image:image-20220719110247-2.png||height="388" width="683"]]
1202	1202
1203	1203
1204	1204	(% style="color:blue" %)**Step 3**(%%): Create an account or log in Mydevices.
...	...	@@ -1231,8 +1231,10 @@
1231	1231
1232	1232	== 3.6 Interface Detail ==
1233	1233
	1431	+
1234	1234	=== 3.6.1 Digital Input Port: DI1/DI2 /DI3 ( For LT-33222-L, low active ) ===
1235	1235
	1434	+
1236	1236	Support NPN Type sensor
1237	1237
1238	1238	[[image:1653356991268-289.png]]
...	...	@@ -1241,6 +1241,7 @@
1241	1241
1242	1242	=== 3.6.2 Digital Input Port: DI1/DI2 ( For LT-22222-L) ===
1243	1243
	1443	+
1244	1244	(((
1245	1245	The DI port of LT-22222-L can support NPN or PNP output sensor.
1246	1246	)))
...	...	@@ -1247,7 +1247,9 @@
1247	1247
1248	1248	(((
1249	1249	(((
1250		-Internal circuit as below, the NEC2501 is a photocoupler, the Active current (from NEC2501 pin 1 to pin 2 is 1ma and the max current is 50mA. When there is active current pass NEC2501 pin1 to pin2. The DI will be active high
	1450	+Internal circuit as below, the NEC2501 is a photocoupler, the Active current (from NEC2501 pin 1 to pin 2 is 1ma and the max current is 50mA. When there is active current pass NEC2501 pin1 to pin2. The DI will be active high.
	1451	+
	1452	+
1251	1251	)))
1252	1252	)))
1253	1253
...	...	@@ -1272,10 +1272,10 @@
1272	1272	)))
1273	1273
1274	1274	* (((
1275		-Connect sensor’s output to DI1-
	1477	+Connect sensor's output to DI1-
1276	1276	)))
1277	1277	* (((
1278		-Connect sensor’s VCC to DI1+.
	1480	+Connect sensor's VCC to DI1+.
1279	1279	)))
1280	1280
1281	1281	(((
...	...	@@ -1283,15 +1283,17 @@
1283	1283	)))
1284	1284
1285	1285	(((
1286		-[[image:1653968155772-850.png||height="23" width="19"]]**= DI1+ / 1K.**
	1488	+[[image:1653968155772-850.png||height="23" width="19"]]**= DI1**+** / 1K.**
1287	1287	)))
1288	1288
1289	1289	(((
1290		-If DI1+ = 12v, the [[image:1653968155772-850.png||height="23" width="19"]]= 12mA , So the LT-22222-L will be able to detect this active signal.
	1492	+If** DI1+ **= **12v**, the [[image:1653968155772-850.png||height="23" width="19"]]= 12mA , So the LT-22222-L will be able to detect this active signal.
1291	1291	)))
1292	1292
1293	1293	(((
1294	1294
	1497	+
	1498	+
1295	1295	)))
1296	1296
1297	1297	(((
...	...	@@ -1303,10 +1303,10 @@
1303	1303	)))
1304	1304
1305	1305	* (((
1306		-Connect sensor’s output to DI1+
	1510	+Connect sensor's output to DI1+
1307	1307	)))
1308	1308	* (((
1309		-Connect sensor’s GND DI1-.
	1513	+Connect sensor's GND DI1-.
1310	1310	)))
1311	1311
1312	1312	(((
...	...	@@ -1323,6 +1323,8 @@
1323	1323
1324	1324	(((
1325	1325
	1530	+
	1531	+
1326	1326	)))
1327	1327
1328	1328	(((
...	...	@@ -1334,10 +1334,10 @@
1334	1334	)))
1335	1335
1336	1336	* (((
1337		-Connect sensor’s output to DI1+ with a serial 50K resistor
	1543	+Connect sensor's output to DI1+ with a serial 50K resistor
1338	1338	)))
1339	1339	* (((
1340		-Connect sensor’s GND DI1-.
	1546	+Connect sensor's GND DI1-.
1341	1341	)))
1342	1342
1343	1343	(((
...	...	@@ -1356,6 +1356,7 @@
1356	1356
1357	1357	=== 3.6.3 Digital Output Port: DO1/DO2 /DO3 ===
1358	1358
	1565	+
1359	1359	NPN output: GND or Float. Max voltage can apply to output pin is 36v.
1360	1360
1361	1361	[[image:1653357531600-905.png]]
...	...	@@ -1364,6 +1364,7 @@
1364	1364
1365	1365	=== 3.6.4 Analog Input Interface ===
1366	1366
	1574	+
1367	1367	The analog input interface is as below. The LT will measure the IN2 voltage so to calculate the current pass the Load. The formula is:
1368	1368
1369	1369
...	...	@@ -1395,6 +1395,7 @@
1395	1395
1396	1396	=== 3.6.5 Relay Output ===
1397	1397
	1606	+
1398	1398	(((
1399	1399	The LT serial controller has two relay interfaces; each interface uses two pins of the screw terminal. User can connect other device’s Power Line to in serial of RO1_1 and RO_2. Such as below:
1400	1400	)))
...	...	@@ -1401,6 +1401,7 @@
1401	1401
1402	1402	[[image:image-20220524100215-9.png]]
1403	1403
	1613	+
1404	1404	[[image:image-20220524100215-10.png||height="382" width="723"]]
1405	1405
1406	1406
...	...	@@ -1407,6 +1407,7 @@
1407	1407
1408	1408	== 3.7 LEDs Indicators ==
1409	1409
	1620	+
1410	1410	[[image:image-20220524100748-11.png]]
1411	1411
1412	1412
...	...	@@ -1413,8 +1413,10 @@
1413	1413
1414	1414	= 4. Use AT Command =
1415	1415
	1627	+
1416	1416	== 4.1 Access AT Command ==
1417	1417
	1630	+
1418	1418	LT supports AT Command set. User can use a USB to TTL adapter plus the 3.5mm Program Cable to connect to LT for using AT command, as below.
1419	1419
1420	1420	[[image:1653358238933-385.png]]
...	...	@@ -1619,6 +1619,7 @@
1619	1619
1620	1620	== 4.2 Common AT Command Sequence ==
1621	1621
	1835	+
1622	1622	=== 4.2.1 Multi-channel ABP mode (Use with SX1301/LG308) ===
1623	1623
1624	1624	(((
...	...	@@ -1729,6 +1729,8 @@
1729	1729	2. Make sure the LG01/02 gateway RX frequency is exactly the same as AT+CHS setting.
1730	1730	3. Make sure SF / bandwidth setting in LG01/LG02 match the settings of AT+DR. refer [[this link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/&file=LoRaWAN%201.0.3%20Regional%20Parameters.xlsx]] to see what DR means.
1731	1731	4. The command AT+RX2FQ and AT+RX2DR is to let downlink work. to set the correct parameters, user can check the actually downlink parameters to be used. As below. Which shows the RX2FQ should use 868400000 and RX2DR should be 5
	1946	+
	1947	+
1732	1732	)))
1733	1733
1734	1734	(((
...	...	@@ -1742,13 +1742,16 @@
1742	1742
1743	1743	=== 4.2.3 Change to Class A ===
1744	1744
	1961	+
1745	1745	If sensor JOINED
1746	1746	(% style="background-color:#dcdcdc" %)AT+CLASS=A
1747	1747	ATZ
1748	1748
1749	1749
	1967	+
1750	1750	= 5. FAQ =
1751	1751
	1970	+
1752	1752	== 5.1 How to upgrade the image? ==
1753	1753
1754	1754
...	...	@@ -1765,12 +1765,14 @@
1765	1765
1766	1766	(((
1767	1767	(% style="color:blue" %)**Step1**(%%)**:** Download [[flash loader>>url:https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/flasher-stm32.html]].
1768		-(% style="color:blue" %)**Step2**(%%)**:** Download the [[LT Image files>>url:http://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/image/]].
	1987	+(% style="color:blue" %)**Step2**(%%)**:** Download the [[LT Image files>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AADKXQ2v5ZT-S3sxdmbvE7UAa/LT-22222-L/image?dl=0&subfolder_nav_tracking=1]].
1769	1769	(% style="color:blue" %)**Step3**(%%)**:** Open flashloader; choose the correct COM port to update.
1770	1770
1771	1771
1772	1772	(% style="color:blue" %)**For LT-22222-L**(%%):
1773		-Hold down the PRO button and then momentarily press the RST reset button and the **DO1 led** will change from OFF to ON. When **DO1 LED** is on, it means the device is in download mode.
	1992	+Hold down the PRO button and then momentarily press the RST reset button and the (% style="color:red" %)**DO1 led**(%%) will change from OFF to ON. When (% style="color:red" %)**DO1 LED**(%%) is on, it means the device is in download mode.
	1993	+
	1994	+
1774	1774	)))
1775	1775
1776	1776	[[image:image-20220524103407-12.png]]
...	...	@@ -1782,6 +1782,7 @@
1782	1782
1783	1783	(% style="color:red" %)**Notice**(%%): In case user has lost the program cable. User can hand made one from a 3.5mm cable. The pin mapping is:
1784	1784
	2006	+
1785	1785	[[image:1653360054704-518.png||height="186" width="745"]]
1786	1786
1787	1787
...	...	@@ -1790,6 +1790,8 @@
1790	1790
1791	1791
1792	1792	== 5.2 How to change the LoRa Frequency Bands/Region? ==
	2015	+
	2016	+
1793	1793	)))
1794	1794	)))
1795	1795
...	...	@@ -1800,7 +1800,10 @@
1800	1800	(((
1801	1801
1802	1802
	2027	+
1803	1803	== 5.3 How to set up LT to work with Single Channel Gateway such as LG01/LG02? ==
	2029	+
	2030	+
1804	1804	)))
1805	1805
1806	1806	(((
...	...	@@ -1813,25 +1813,33 @@
1813	1813	(((
1814	1814	Assume we have a LG02 working in the frequency 868400000 now , below is the step.
1815	1815
	2043	+
1816	1816
1817	1817	)))
1818	1818	)))
1819	1819
1820	1820	(((
1821		-(% style="color:#4f81bd" %)**Step1**(%%): Log in TTN, Create an ABP device in the application and input the network session key (NETSKEY), app session key (APPSKEY) from the device.
	2049	+(% style="color:blue" %)**Step1**(%%):  Log in TTN, Create an ABP device in the application and input the network session key (NETSKEY), app session key (APPSKEY) from the device.
	2050	+
	2051	+
1822	1822	)))
1823	1823
1824	1824	(((
1825	1825	[[image:1653360231087-571.png||height="401" width="727"]]
	2056	+
	2057	+
1826	1826	)))
1827	1827
1828	1828	(((
1829		-(% style="color:red" %)Note: user just need to make sure above three keys match, User can change either in TTN or Device to make then match. In TTN, NETSKEY and APPSKEY can be configured by user in setting page, but Device Addr is generated by TTN.
	2061	+(% style="color:red" %)**Note: user just need to make sure above three keys match, User can change either in TTN or Device to make then match. In TTN, NETSKEY and APPSKEY can be configured by user in setting page, but Device Addr is generated by TTN.**
1830	1830	)))
1831	1831
1832	1832
	2065	+
1833	1833	(((
1834		-(% style="color:#4f81bd" %)**Step2**(%%)**: **Run AT Command to make LT work in Single frequency & ABP mode. Below is the AT commands:
	2067	+(% style="color:blue" %)**Step2**(%%)**:  **Run AT Command to make LT work in Single frequency & ABP mode. Below is the AT commands:
	2068	+
	2069	+
1835	1835	)))
1836	1836
1837	1837	(((
...	...	@@ -1855,16 +1855,21 @@
1855	1855	[[image:1653360498588-932.png||height="485" width="726"]]
1856	1856
1857	1857
	2093	+
1858	1858	== 5.4 Can I see counting event in Serial? ==
1859	1859
	2096	+
1860	1860	(((
1861		-User can run AT+DEBUG command to see the counting event in serial. If firmware too old and doesn’t support AT+DEBUG. User can update to latest firmware first.
	2098	+User can run AT+DEBUG command to see the counting event in serial. If firmware too old and doesn't support AT+DEBUG. User can update to latest firmware first.
1862	1862
1863	1863
	2101	+
1864	1864	== 5.5 Can i use point to point communication for LT-22222-L? ==
1865	1865
	2104	+
1866	1866	Yes, please refer [[Point to Point Communication>>doc:Main. Point to Point Communication of LT-22222-L.WebHome]]
1867	1867
	2107	+
1868	1868
1869	1869	)))
1870	1870
...	...	@@ -1871,6 +1871,7 @@
1871	1871	(((
1872	1872	== 5.6 Why does the relay output become the default and open relay after the lt22222 is powered off? ==
1873	1873
	2114	+
1874	1874	If the device is not shut down, but directly powered off.
1875	1875
1876	1876	It will default that this is a power-off state.
...	...	@@ -1880,12 +1880,17 @@
1880	1880	After restart, the status before power failure will be read from flash.
1881	1881
1882	1882
	2124	+
1883	1883	= 6. Trouble Shooting =
	2126	+
	2127	+
1884	1884	)))
1885	1885
1886	1886	(((
1887	1887	(((
1888		-== 6.1 Downlink doesn’t work, how to solve it? ==
	2132	+== 6.1 Downlink doesn't work, how to solve it? ==
	2133	+
	2134	+
1889	1889	)))
1890	1890	)))
1891	1891
...	...	@@ -1896,7 +1896,10 @@
1896	1896	(((
1897	1897
1898	1898
	2145	+
1899	1899	== 6.2 Have trouble to upload image. ==
	2147	+
	2148	+
1900	1900	)))
1901	1901
1902	1902	(((
...	...	@@ -1906,7 +1906,10 @@
1906	1906	(((
1907	1907
1908	1908
1909		-== 6.3 Why I can’t join TTN in US915 /AU915 bands? ==
	2158	+
	2159	+== 6.3 Why I can't join TTN in US915 /AU915 bands? ==
	2160	+
	2161	+
1910	1910	)))
1911	1911
1912	1912	(((
...	...	@@ -1914,23 +1914,27 @@
1914	1914	)))
1915	1915
1916	1916
	2169	+
1917	1917	= 7. Order Info =
1918	1918
	2172	+
1919	1919	(% style="color:#4f81bd" %)**LT-22222-L-XXX:**
1920	1920
1921		-
1922	1922	(% style="color:#4f81bd" %)**XXX:**
1923	1923
1924		-* (% style="color:#4f81bd" %)**EU433**(%%): LT with frequency bands EU433
1925		-* (% style="color:#4f81bd" %)**EU868**(%%): LT with frequency bands EU868
1926		-* (% style="color:#4f81bd" %)**KR920**(%%): LT with frequency bands KR920
1927		-* (% style="color:#4f81bd" %)**CN470**(%%): LT with frequency bands CN470
1928		-* (% style="color:#4f81bd" %)**AS923**(%%): LT with frequency bands AS923
1929		-* (% style="color:#4f81bd" %)**AU915**(%%): LT with frequency bands AU915
1930		-* (% style="color:#4f81bd" %)**US915**(%%): LT with frequency bands US915
1931		-* (% style="color:#4f81bd" %)**IN865**(%%): LT with frequency bands IN865
1932		-* (% style="color:#4f81bd" %)**CN779**(%%): LT with frequency bands CN779
	2177	+* (% style="color:red" %)**EU433**(%%):  LT with frequency bands EU433
	2178	+* (% style="color:red" %)**EU868**(%%):  LT with frequency bands EU868
	2179	+* (% style="color:red" %)**KR920**(%%):  LT with frequency bands KR920
	2180	+* (% style="color:red" %)**CN470**(%%):  LT with frequency bands CN470
	2181	+* (% style="color:red" %)**AS923**(%%):  LT with frequency bands AS923
	2182	+* (% style="color:red" %)**AU915**(%%):  LT with frequency bands AU915
	2183	+* (% style="color:red" %)**US915**(%%):  LT with frequency bands US915
	2184	+* (% style="color:red" %)**IN865**(%%):  LT with frequency bands IN865
	2185	+* (% style="color:red" %)**CN779**(%%):  LT with frequency bands CN779
1933	1933
	2187	+
	2188	+
	2189	+
1934	1934	= 8. Packing Info =
1935	1935
1936	1936
...	...	@@ -1948,8 +1948,12 @@
1948	1948	* Package Size / pcs : 14.5 x 8 x 5 cm
1949	1949	* Weight / pcs : 170g
1950	1950
	2207	+
	2208	+
	2209	+
1951	1951	= 9. Support =
1952	1952
	2212	+
1953	1953	* (((
1954	1954	Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1955	1955	)))
...	...	@@ -1963,7 +1963,9 @@
1963	1963
1964	1964	= 10. Reference​​​​​ =
1965	1965
	2226	+
1966	1966	* LT-22222-L: [[http:~~/~~/www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]]
1967		-* [[Image Download>>url:http://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/image/]]
1968		-* [[AT Command Manual>>url:http://www.dragino.com/downloads/index.php?dir=LT_LoRa_IO_Controller/LT33222-L/]]
	2228	+* [[Datasheet, Document Base>>https://www.dropbox.com/sh/gxxmgks42tqfr3a/AACEdsj_mqzeoTOXARRlwYZ2a?dl=0]]
1969	1969	* [[Hardware Source>>url:https://github.com/dragino/Lora/tree/master/LT/LT-33222-L/v1.0]]
	2230	+
	2231	+

image-20220714135731-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bei

Size

...	...	@@ -1,0 +1,1 @@
	1	+54.1 KB

Content

image-20220719105525-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bei

Size

...	...	@@ -1,0 +1,1 @@
	1	+165.5 KB

Content

image-20220719110247-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bei

Size

...	...	@@ -1,0 +1,1 @@
	1	+52.9 KB

Content