Changes for page LT-22222-L -- LoRa I/O Controller User Manual

Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 9 removed)
  • 1653356737703-362.png
  • image-20220524092754-5.png
  • image-20220524093238-6.png
  • image-20220524093328-7.png
  • image-20220524093351-8.png
  • image-20220524093724-9.png
  • image-20220524093831-10.png
  • image-20220524094641-11.png
  • image-20220524094641-12.png

Details

Page properties

Content

...	...	@@ -558,87 +558,76 @@
558	558
559	559	They should be available for each of Dragino Sensors, such as: change uplink interval, reset device. For firmware v1.5.4, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>http://8.211.40.43:8080/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
560	560
561		-=== 3.4.2 Sensor related commands ===
	561	+=== Sensor related commands ===
562	562
563		-==== 3.4.2.1 Set Transmit Interval ====
564	564
	564	+==== Set Transmit Interval ====
	565	+
565	565	Set device uplink interval.
566	566
567	567	* AT Command:
568	568
569		-(% class="box infomessage" %)
570		-(((
571		-**AT+TDC=N **
572		-)))
	570	+AT+TDC=N
573	573
574		-**Example: **AT+TDC=30000. Means set interval to 30 seconds
	572	+Example: AT+TDC=30000. Means set interval to 30 seconds
575	575
	574	+
576	576	* Downlink Payload (prefix 0x01):
577	577
578		-(% class="box infomessage" %)
579		-(((
580		-**0x01 aa bb cc     ~/~/ Same as AT+TDC=0x(aa bb cc)**
581		-)))
	577	+0x01 aa bb cc     ~/~/ Same as AT+TDC=0x(aa bb cc)
582	582
583		-==== 3.4.2.2 Set Work Mode (AT+MOD) ====
584	584
	580	+==== Set Work Mode (AT+MOD) ====
	581	+
585	585	Set work mode.
586	586
587	587	* AT Command:
588	588
589		-(% class="box infomessage" %)
590		-(((
591		-**AT+MOD=N  **
592		-)))
	586	+AT+MOD=N
593	593
594		-**Example**: AT+MOD=2. Set work mode to Double DI counting mode
	588	+Example: AT+MOD=2. Set work mode to Double DI counting mode
595	595
	590	+
596	596	* Downlink Payload (prefix 0x0A):
597	597
598		-(% class="box infomessage" %)
599		-(((
600		-**0x0A aa     ~/~/ Same as AT+MOD=aa**
601		-)))
	593	+0x0A aa     ~/~/ Same as AT+MOD=aa
602	602
603		-==== 3.4.2.3 Poll an uplink ====
604	604
	596	+
	597	+==== Poll an uplink ====
	598	+
605	605	* AT Command:
606	606
607	607	There is no AT Command to poll uplink
608	608
	603	+
609	609	* Downlink Payload (prefix 0x08):
610	610
611		-(% class="box infomessage" %)
612		-(((
613		-**0x08 FF     ~/~/ Poll an uplink,**
614		-)))
	606	+0x08 FF     ~/~/ Poll an uplink,
615	615
616		-**Example**: 0x08FF, ask device to send an Uplink
	608	+Example: 0x08FF, ask device to send an Uplink
617	617
618		-==== 3.4.2.4 Enable Trigger Mode ====
619	619
620		-Use of trigger mode, please check [[ADDMOD6>>path:http://8.211.40.43:8080/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LT-22222-L/#H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29]]
	611	+==== Enable Trigger Mode ====
621	621
	613	+Use of trigger mode, please check [[ADDMOD6>>path:#MOD6]]
	614	+
622	622	* AT Command:
623	623
624		-(% class="box infomessage" %)
625		-(((
626		-**AT+ADDMOD6=1 or 0**
627		-)))
	617	+AT+ADDMOD6=1 or 0
628	628
629	629	1: Enable Trigger Mode
630	630
631	631	0: Disable Trigger Mode
632	632
	623	+
633	633	* Downlink Payload (prefix 0x0A 06):
634	634
635		-(% class="box infomessage" %)
636		-(((
637		-**0x0A 06 aa     ~/~/ Same as AT+ADDMOD6=aa,**
638		-)))
	626	+0x0A 06 aa     ~/~/ Same as AT+ADDMOD6=aa,
639	639
640		-==== 3.4.2.5 Poll trigger settings ====
641	641
	629	+==== Poll trigger settings ====
	630	+
642	642	Poll trigger settings,
643	643
644	644	* AT Command:
...	...	@@ -645,337 +645,339 @@
645	645
646	646	There is no AT Command for this feature.
647	647
	637	+
648	648	* Downlink Payload (prefix 0x AB 06):
649	649
650		-(% class="box infomessage" %)
651		-(((
652		-**0xAB 06  ~/~/ Poll trigger settings, device will uplink trigger settings once receive this command**
653		-)))
	640	+0xAB 06  ~/~/ Poll trigger settings, device will uplink [[trigger settings>>path:#Trigger_Settings]] once receive this command
654	654
655		-==== 3.4.2.6 Enable / Disable DI1/DI2/DI3 as trigger ====
656	656
	643	+==== Enable / Disable DI1/DI2/DI3 as trigger ====
	644	+
657	657	Enable Disable DI1/DI2/DI2 as trigger,
658	658
659	659	* AT Command:
660	660
661		-(% class="box infomessage" %)
662		-(((
663		-**Format: AT+DTRI=<DI1_TIRGGER_FlAG>,< DI2_TIRGGER_FlAG >**
664		-)))
	649	+Format: AT+DTRI=<DI1_TIRGGER_FlAG>,< DI2_TIRGGER_FlAG >
665	665
666		-**Example:**
	651	+Example:
667	667
668	668	AT+ DTRI =1,0   (Enable DI1 trigger / disable DI2 trigger)
669	669
	655	+
	656	+
670	670	* Downlink Payload (prefix 0xAA 02):
671	671
672		-(% class="box infomessage" %)
673		-(((
674		-**0xAA 02 aa bb  ~/~/ Same as AT+DTRI=aa,bb**
675		-)))
	659	+0xAA 02 aa bb  ~/~/ Same as AT+DTRI=aa,bb
676	676
677		-==== 3.4.2.7 Trigger1 – Set DI1 or DI3 as trigger ====
678	678
	662	+
	663	+==== Trigger1 – Set DI1 or DI3 as trigger ====
	664	+
679	679	Set DI1 or DI3(for LT-33222-L) trigger.
680	680
681	681	* AT Command:
682	682
683		-(% class="box infomessage" %)
684		-(((
685		-**AT+TRIG1=a,b**
686		-)))
	669	+AT+TRIG1=a,b
687	687
688	688	a : Interrupt mode. 0: falling edge; 1: rising edge, 2: falling and raising edge(for MOD=1).
689	689
690	690	b : delay timing.
691	691
692		-**Example:**
	675	+Example:
693	693
694	694	AT+TRIG1=1,100(set DI1 port to trigger on high level, valid signal is 100ms )
695	695
	679	+
696	696	* Downlink Payload (prefix 0x09 01 ):
697	697
698		-(% class="box infomessage" %)
699		-(((
700		-**0x09 01 aa bb cc ~/~/ same as AT+TRIG1=aa,0x(bb cc)**
701		-)))
	682	+0x09 01 aa bb cc ~/~/ same as AT+TRIG1=aa,0x(bb cc)
702	702
703		-==== 3.4.2.8 Trigger2 – Set DI2 as trigger ====
704	704
	685	+==== Trigger2 – Set DI2 as trigger ====
	686	+
705	705	Set DI2 trigger.
706	706
707	707	* AT Command:
708	708
709		-(% class="box infomessage" %)
710		-(((
711		-**AT+TRIG2=a,b**
712		-)))
	691	+AT+TRIG2=a,b
713	713
714	714	a : Interrupt mode. 0: falling edge; 1: rising edge, 2: falling and raising edge(for MOD=1).
715	715
716	716	b : delay timing.
717	717
718		-**Example:**
	697	+Example:
719	719
720	720	AT+TRIG2=0,100(set DI1 port to trigger on low level, valid signal is 100ms )
721	721
	701	+
722	722	* Downlink Payload (prefix 0x09 02 ):
723	723
724		-(% class="box infomessage" %)
725		-(((
726		-**0x09 02 aa bb cc ~/~/ same as AT+TRIG1=aa,0x(bb cc)**
727		-)))
	704	+0x09 02 aa bb cc ~/~/ same as AT+TRIG1=aa,0x(bb cc)
728	728
729		-==== 3.4.2.9 Trigger – Set AC (current) as trigger ====
730	730
731		-Set current trigger , base on AC port. See [[trigger mode>>path:http://8.211.40.43:8080/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LT-22222-L/#H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29]]
	707	+==== Trigger – Set AC (current) as trigger ====
732	732
	709	+Set current trigger , base on AC port. See [[trigger mode>>path:#MOD6]]
	710	+
733	733	* AT Command:
734	734
735		-(% class="box infomessage" %)
736		-(((
737		-**AT+ACLIM. **
738		-)))
	713	+AT+ACLIM. See [[trigger mode>>path:#MOD6]]
739	739
	715	+
740	740	* Downlink Payload (prefix 0xAA 01 ):
741	741
742		-(% class="box infomessage" %)
743		-(((
744		-**0x AA 01 aa bb cc dd ee ff gg hh ~/~/ same as AT+ACLIM See [[trigger mode>>url:http://8.211.40.43:8080/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LT-22222-L/#H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29]]**
745		-)))
	718	+0x AA 01 aa bb cc dd ee ff gg hh ~/~/ same as AT+ACLIM See [[trigger mode>>path:#MOD6]]
746	746
747		-==== 3.4.2.10 Trigger – Set AV (voltage) as trigger ====
748	748
749		-Set current trigger , base on AV port. See [[trigger mode>>url:http://8.211.40.43:8080/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LT-22222-L/#H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29]]
	721	+==== Trigger – Set AV (voltage) as trigger ====
750	750
	723	+Set current trigger , base on AV port. See [[trigger mode>>path:#MOD6]]
	724	+
751	751	* AT Command:
752	752
753		-(% class="box infomessage" %)
754		-(((
755		-**AT+AVLIM. See [[trigger mode>>url:http://8.211.40.43:8080/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LT-22222-L/#H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29]]**
756		-)))
	727	+AT+AVLIM. See [[trigger mode>>path:#MOD6]]
757	757
	729	+
758	758	* Downlink Payload (prefix 0xAA 00 ):
759	759
760		-(% class="box infomessage" %)
761		-(((
762		-**0x AA 00 aa bb cc dd ee ff gg hh ~/~/ same as AT+AVLIM See [[trigger mode>>url:http://8.211.40.43:8080/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LT-22222-L/#H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29]] **
763		-)))
	732	+0x AA 00 aa bb cc dd ee ff gg hh ~/~/ same as AT+AVLIM See [[trigger mode>>path:#MOD6]]
764	764
765		-==== 3.4.2.11 Trigger – Set minimum interval ====
	734	+==== Trigger – Set minimum interval ====
766	766
767	767	Set AV and AC trigger minimum interval, system won’t response to the second trigger within this set time after the first trigger.
768	768
769	769	* AT Command:
770	770
771		-(% class="box infomessage" %)
772		-(((
773		-**AT+ATDC=5. Device won’t response the second trigger within 5 minute after the first trigger.**
774		-)))
	740	+AT+ATDC=5. Device won’t response the second trigger within 5 minute after the first trigger.
775	775
	742	+
776	776	* Downlink Payload (prefix 0xAC ):
777	777
778		-(% class="box infomessage" %)
779		-(((
780		-**0x AC aa bb ~/~/ same as AT+ATDC=0x(aa bb)   . Unit (min)**
781		-)))
	745	+0x AC aa bb ~/~/ same as AT+ATDC=0x(aa bb)   . Unit (min)
782	782
783		-==== 3.4.2.12 DO ~-~- Control Digital Output DO1/DO2/DO3 ====
784	784
	748	+==== DO ~-~- Control Digital Output DO1/DO2/DO3 ====
	749	+
785	785	* AT Command:
786	786
787	787	There is no AT Command to control Digital Output
788	788
	754	+
789	789	* Downlink Payload (prefix 0x02):
790	790
791		-(% class="box infomessage" %)
792		-(((
793		-**0x02 aa bb cc     ~/~/ Set DO1/DO2/DO3 output**
794		-)))
	757	+0x02 aa bb cc     ~/~/ Set DO1/DO2/DO3 output
795	795
796		-(((
797	797	If payload = 0x02010001, while there is load between V+ and DOx, it means set DO1 to low, DO2 to high and DO3 to low.
798		-)))
799	799
800		-(((
801	801	01: Low,  00: High ,  11: No action
802		-)))
803	803
804		-[[image:image-20220524092754-5.png]]
	763	+(% border="1" style="background-color:#f7faff" %)
	764	+|Downlink Code|DO1|DO2|DO3
	765	+|02  01  00  11|Low|High|No Action
	766	+|02  00  11  01|High|No Action|Low
	767	+|02  11  01  00|No Action|Low|High
805	805
806		-(((
807		-(% style="color:red" %)Note: For LT-22222-L, there is no DO3, the last byte can use any value.
808		-)))
	769	+Note: For LT-22222-L, there is no DO3, the last byte can use any value.
809	809
810		-(((
811		-(% style="color:red" %)Device will upload a packet if downlink code executes successfully.
812		-)))
	771	+Device will upload a packet if downlink code executes successfully.
813	813
814	814
815		-==== 3.4.2.13 DO ~-~- Control Digital Output DO1/DO2/DO3 with time control ====
816	816
	775	+
	776	+
	777	+==== DO ~-~- Control Digital Output DO1/DO2/DO3 with time control ====
	778	+
817	817	* AT Command:
818	818
819	819	There is no AT Command to control Digital Output
820	820
	783	+
821	821	* Downlink Payload (prefix 0xA9):
822	822
823		-(% class="box infomessage" %)
824		-(((
825		-**0xA9 aa bb cc     ~/~/ Set DO1/DO2/DO3 output with time control**
826		-)))
	786	+0xA9 aa bb cc     ~/~/ Set DO1/DO2/DO3 output with time control
827	827
828	828	This is to control the digital output time of DO pin. Include four bytes:
829	829
830		-(% style="color:#4f81bd" %)**First Byte**(%%)**:** Type code (0xA9)
	790	+**First Byte:** Type code (0xA9)
831	831
832		-(% style="color:#4f81bd" %)**Second Byte**(%%): Inverter Mode
	792	+**Second Byte**: Inverter Mode
833	833
834	834	01: DO pins will change back to original state after timeout.
835	835
836	836	00: DO pins will change to an inverter state after timeout
837	837
838		-(% style="color:#4f81bd" %)**Third Byte**(%%): Control Method and Ports status:
839	839
840		-[[image:image-20220524093238-6.png]]
	799	+**Third Byte**: Control Method and Ports status:
841	841
842		-(% style="color:#4f81bd" %)**Fourth Byte**(%%): Control Method and Ports status:
	801	+(% border="1" style="background-color:#f7faff" %)
	802	+|Second Byte|Status
	803	+|0x01|DO1 set to low
	804	+|0x00|DO1 set to high
	805	+|0x11|DO1 NO Action
843	843
844		-[[image:image-20220524093328-7.png]]
	807	+**Fourth Byte**: Control Method and Ports status:
845	845
846		-(% style="color:#4f81bd" %)**Fifth Byte**(%%): Control Method and Ports status:
	809	+(% border="1" style="background-color:#f7faff" %)
	810	+|Second Byte|Status
	811	+|0x01|DO2 set to low
	812	+|0x00|DO2 set to high
	813	+|0x11|DO2 NO Action
847	847
848		-[[image:image-20220524093351-8.png]]
	815	+**Fifth Byte**: Control Method and Ports status:
849	849
850		-(% style="color:#4f81bd" %)**Sixth and Seventh Byte**:
	817	+(% border="1" style="background-color:#f7faff" %)
	818	+|Second Byte|Status
	819	+|0x01|DO3 set to low
	820	+|0x00|DO3 set to high
	821	+|0x11|DO3 NO Action
851	851
	823	+**Sixth and Seventh Byte**:
	824	+
852	852	Latching time. Unit: ms
853	853
854	854	Device will upload a packet if downlink code executes successfully.
855	855
856		-**Example payload:**
857	857
858		-**~1. A9 01 01 01 01 07 D0**
859	859
	831	+Example payload:
	832	+
	833	+1. A9 01 01 01 01 07 D0
	834	+
860	860	DO1 pin & DO2 pin & DO3 pin will be set to Low, last 2 seconds, then change back to original state.
861	861
862		-**2. A9 01 00 01 11 07 D0**
863	863
	838	+1. A9 01 00 01 11 07 D0
	839	+
864	864	DO1 pin set high, DO2 pin set low, DO3 pin no action, last 2 seconds, then change back to original state.
865	865
866		-**3. A9 00 00 00 00 07 D0**
867	867
	843	+1. A9 00 00 00 00 07 D0
	844	+
868	868	DO1 pin & DO2 pin & DO3 pin will be set to high, last 2 seconds, then both change to low.
869	869
870		-**4. A9 00 11 01 00 07 D0**
871	871
	848	+1. A9 00 11 01 00 07 D0
	849	+
872	872	DO1 pin no action, DO2 pin set low, DO3 pin set high, last 2 seconds, then DO1 pin no action, DO2 pin set high, DO3 pin set low
873	873
874	874
875		-=== 3.4.2.14 Relay ~-~- Control Relay Output RO1/RO2 ===
876	876
	854	+
	855	+==== Relay ~-~- Control Relay Output RO1/RO2 ====
	856	+
877	877	* AT Command:
878	878
879	879	There is no AT Command to control Relay Output
880	880
	861	+
881	881	* Downlink Payload (prefix 0x03):
882	882
883		-(% class="box infomessage" %)
884		-(((
885		-**0x03 aa bb     ~/~/ Set RO1/RO2 output**
886		-)))
	864	+0x03 aa bb     ~/~/ Set RO1/RO2 output
887	887
888		-(((
889	889	If payload = 0x030100, it means set RO1 to close and RO2 to open.
890		-)))
891	891
892		-(((
893	893	01: Close ,  00: Open , 11: No action
894		-)))
895	895
896		-(((
897		-[[image:image-20220524093724-9.png]]
898		-)))
	870	+(% border="1" style="background-color:#f7faff" %)
	871	+|Downlink Code|RO1|RO2
	872	+|03  00  11|Open|No Action
	873	+|03  01  11|Close|No Action
	874	+|03  11  00|No Action|Open
	875	+|03  11  01|No Action|Close
	876	+|03  00  00|Open|Open
	877	+|03  01  01|Close|Close
	878	+|03  01  00|Close|Open
	879	+|03  00  01|Open|Close
899	899
900	900	Device will upload a packet if downlink code executes successfully.
901	901
902	902
903		-==== 3.4.2.15 Relay ~-~- Control Relay Output RO1/RO2 with time control ====
	884	+==== Relay ~-~- Control Relay Output RO1/RO2 with time control ====
904	904
905	905	* AT Command:
906	906
907	907	There is no AT Command to control Relay Output
908	908
	890	+
909	909	* Downlink Payload (prefix 0x05):
910	910
911		-(% class="box infomessage" %)
912		-(((
913		-**0x05 aa bb cc dd     ~/~/ Set RO1/RO2 relay with time control:**
914		-)))
	893	+0x05 aa bb cc dd     ~/~/ Set RO1/RO2 relay with time control:
915	915
916	916	This is to control the relay output time of relay. Include four bytes:
917	917
918		-(% style="color:#4f81bd" %)**First Byte **(%%)**:** Type code (0x05)
	897	+**First Byte:** Type code (0x05)
919	919
920		-(% style="color:#4f81bd" %)**Second Byte(aa)**(%%): Inverter Mode
	899	+**Second Byte(aa)**: Inverter Mode
921	921
922	922	01: Relays will change back to original state after timeout.
923	923
924	924	00: Relays will change to an inverter state after timeout
925	925
926		-(% style="color:#4f81bd" %)**Third Byte(bb)**(%%): Control Method and Ports status:
927	927
928		-[[image:image-20220524093831-10.png]]
	906	+**Third Byte(bb)**: Control Method and Ports status:
929	929
930		-(% style="color:#4f81bd" %)**Fourth/Fifth Bytes(cc)**(%%): Latching time. Unit: ms
	908	+(% border="1" style="background-color:#f7faff" %)
	909	+|Value|Status
	910	+|0x11|RO1 and RO2 to NO
	911	+|0x10|RO2 to NO, RO1 to NC
	912	+|0x01|RO2 to NC, RO1 to NO
	913	+|0x00|RO1 and RO2 to NC.
	914	+|0x20|RO1 No Action, RO2 to NC
	915	+|0x21|RO1 No Action, RO2 to NO
	916	+|0x02|RO1 to NC, RO2 No Action
	917	+|0x12|RO1 to NO, RO2 No Action
931	931
	919	+**Fourth / Fifth Bytes (cc)**: Latching time. Unit: ms
	920	+
932	932	Device will upload a packet if downlink code executes successfully.
933	933
	923	+
	924	+
934	934	**Example payload:**
935	935
936		-**~1. 05 01 11 07 D0**
	927	+1. 05 01 11 07 D0
937	937
938	938	Relay1 and Relay 2 will be set to NO , last 2 seconds, then change back to original state.
939	939
940		-**2. 05 01 10 07 D0**
941	941
	932	+1. 05 01 10 07 D0
	933	+
942	942	Relay1 will change to NO, Relay2 will change to NC, last 2 seconds, then both change back to original state.
943	943
944		-**3. 05 00 01 07 D0**
945	945
	937	+1. 05 00 01 07 D0
	938	+
946	946	Relay1 will change to NC, Relay2 will change to NO, last 2 seconds, then relay change to NO, Relay2 change to NC.
947	947
948		-**4. 05 00 00 07 D0**
949	949
	942	+1. 05 00 00 07 D0
	943	+
950	950	Relay 1 & relay2 will change to NC, last 2 seconds, then both change to NO.
951	951
952	952
953		-==== 3.4.2.16 Counting ~-~- Voltage threshold counting ====
954	954
955		-When voltage exceed the threshold, count. Feature see [[MOD4>>path:http://8.211.40.43:8080/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LT-22222-L/#H3.3.4AT2BMOD3D42CSingleDICounting2B1xVoltageCounting]]
956	956
	949	+
	950	+
	951	+==== Counting ~-~- Voltage threshold counting ====
	952	+
	953	+When voltage exceed the threshold, count. Feature see [[MOD4>>path:#MOD4]]
	954	+
957	957	* AT Command:
958	958
959		-(% class="box infomessage" %)
960		-(((
961		-**AT+VOLMAX    ~/~/ See [[MOD4>>path:http://8.211.40.43:8080/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LT-22222-L/#H3.3.4AT2BMOD3D42CSingleDICounting2B1xVoltageCounting]]**
962		-)))
	957	+AT+VOLMAX    ~/~/ See [[MOD4>>path:#MOD4]]
963	963
	959	+
964	964	* Downlink Payload (prefix 0xA5):
965	965
966		-(% class="box infomessage" %)
967		-(((
968		-**0xA5 aa bb cc   ~/~/ Same as AT+VOLMAX=(aa bb),cc**
969		-)))
	962	+0xA5 aa bb cc   ~/~/ Same as AT+VOLMAX=(aa bb),cc
970	970
971		-==== 3.4.2.17 Counting ~-~- Pre-configure the Count Number ====
972	972
	965	+==== Counting ~-~- Pre-configure the Count Number ====
	966	+
973	973	* AT Command:
974	974
975		-(% class="box infomessage" %)
976		-(((
977		-**AT+SETCNT=aa,(bb cc dd ee) **
978		-)))
	969	+AT+SETCNT=aa,(bb cc dd ee)
979	979
980	980	aa: 1: Set count1,
981	981
...	...	@@ -985,66 +985,65 @@
985	985
986	986	Bb cc dd ee: number to be set
987	987
	979	+
988	988	* Downlink Payload (prefix 0xA8):
989	989
990		-(% class="box infomessage" %)
991		-(((
992		-**0x A8 aa bb cc dd ee     ~/~/ same as AT+SETCNT=aa,(bb cc dd ee)**
993		-)))
	982	+0x A8 aa bb cc dd ee     ~/~/ same as AT+SETCNT=aa,(bb cc dd ee)
994	994
995		-==== 3.4.2.18 Counting ~-~- Clear Counting ====
996	996
	985	+
	986	+
	987	+
	988	+==== Counting ~-~- Clear Counting ====
	989	+
997	997	Clear counting for counting mode
998	998
999	999	* AT Command:
1000	1000
1001		-(% class="box infomessage" %)
1002		-(((
1003		-**AT+CLRCOUNT ~/~/ clear all counting**
1004		-)))
	994	+AT+CLRCOUNT ~/~/ clear all counting
1005	1005
	996	+
1006	1006	* Downlink Payload (prefix 0xA6):
1007	1007
1008		-(% class="box infomessage" %)
1009		-(((
1010		-**0x A6 01     ~/~/ clear all counting,**
1011		-)))
	999	+0x A6 01     ~/~/ clear all counting,
1012	1012
1013		-==== 3.4.2.19 Counting ~-~- Change counting mode save time ====
1014	1014
	1002	+
	1003	+
	1004	+==== Counting ~-~- Change counting mode save time ====
	1005	+
1015	1015	* AT Command:
1016	1016
1017		-(% class="box infomessage" %)
1018		-(((
1019		-**AT+COUTIME=60  ~/~/ Set save time to 60 seconds. Device will save the counting result in internal flash every 60 seconds. (min value: 30)**
1020		-)))
	1008	+AT+COUTIME=60  ~/~/ Set save time to 60 seconds. Device will save the counting result in internal flash every 60 seconds. (min value: 30)
1021	1021
	1010	+
1022	1022	* Downlink Payload (prefix 0xA7):
1023	1023
1024		-(% class="box infomessage" %)
1025		-(((
1026		-**0x A7 aa bb cc     ~/~/ same as AT+COUTIME =aa bb cc,**
1027		-)))
	1013	+0x A7 aa bb cc     ~/~/ same as AT+COUTIME =aa bb cc,
1028	1028
1029	1029	range: aa bb cc:0 to 16777215,  (unit:second)
1030	1030
1031		-== 3.5 Integrate with Mydevice ==
1032	1032
	1018	+
	1019	+
	1020	+1.
	1021	+11. Integrate with Mydevice
	1022	+
1033	1033	Mydevices provides a human friendly interface to show the sensor data, once we have data in TTN, we can use Mydevices to connect to TTN and see the data in Mydevices. Below are the steps:
1034	1034
1035		-**Step 1**: Be sure that your device is programmed and properly connected to the network at this time.
1036	1036
1037		-**Step 2**: To configure the Application to forward data to Mydevices you will need to add integration. To add the Mydevices integration, perform the following steps:
	1026	+Step 1: Be sure that your device is programmed and properly connected to the network at this time.
1038	1038
1039		-[[image:1653356737703-362.png||height="232" width="732"]]
	1028	+Step 2: To configure the Application to forward data to Mydevices you will need to add integration. To add the Mydevices integration, perform the following steps:
1040	1040
1041		-[[image:image-20220524094641-11.png||height="390" width="723"]]
1042	1042
	1031	+[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.png]]
1043	1043
1044		-[[image:image-20220524094641-12.png||height="402" width="718"]]
1045	1045
	1034	+[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]
1046	1046
1047	1047
	1037	+[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]
1048	1048
1049	1049
1050	1050

1653356737703-362.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-42.1 KB

Content

image-20220524092754-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-7.8 KB

Content

image-20220524093238-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.0 KB

Content

image-20220524093328-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.1 KB

Content

image-20220524093351-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.2 KB

Content

image-20220524093724-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-14.3 KB

Content

image-20220524093831-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-15.2 KB

Content

image-20220524094641-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-136.2 KB

Content

image-20220524094641-12.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-69.1 KB

Content