Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -277,7 +277,7 @@
277	277
278	278
279	279	(((
280		-In working mode MOD1, the uplink payload includes a total of 9 bytes. Uplink packets are sent over LoRaWAN FPort=2. By default, one uplink is sent every 10 minutes. (% style="display:none" %)
	280	+The uplink payload is 11 bytes long. Uplink packets are sent over LoRaWAN FPort=2. By default, one uplink is sent every 10 minutes. (% style="display:none" %)
281	281
282	282	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
283	283	|(% style="background-color:#4f81bd; color:white" %)**Size(bytes)**|(% style="background-color:#4f81bd; color:white" %)**2**|(% style="background-color:#4f81bd; color:white" %)**2**|(% style="background-color:#4f81bd; color:white" %)**2**|(% style="background-color:#4f81bd; color:white" %)**2**|(% style="background-color:#4f81bd; color:white" %)**1**|(% style="background-color:#4f81bd; color:white" %)**1**|(% style="background-color:#4f81bd; color:white" %)**1**
...	...	@@ -295,7 +295,7 @@
295	295	)))
296	296
297	297	(((
298		-(% style="color:#4f81bd" %)*** DIDORO**(%%) is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1, for a total of 1 byte ,as shown below
	298	+(% style="color:#4f81bd" %)*** DIDORO**(%%) is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1, for a total of 1 byte, as shown below.
299	299
300	300	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
301	301	|**bit 7**|**bit 6**|**bit 5**|**bit 4**|**bit 3**|**bit 2**|**bit 1**|**bit 0**
...	...	@@ -321,35 +321,35 @@
321	321
322	322	ACI2 channel current is 0x1300/1000=4.864mA
323	323
324		-The last byte 0xAA= 10101010(B) means
	324	+The last byte 0xAA= 10101010(b) means,
325	325
326	326	* [1] RO1 relay channel is closed, and the RO1 LED is ON.
327	327	* [0] RO2 relay channel is open, and RO2 LED is OFF.
328		-
329		-**LT22222-L:**
330		-
331		-* [1] DI2 channel is high input and DI2 LED is ON.
332		-* [0] DI1 channel is low input.
333		-
334		-* [0] DO3 channel output state
	328	+* [1] DI3 - not used for LT-22222-L.
	329	+* [0] DI2 channel input is low, and the DI2 LED is OFF.
	330	+* [1] DI1 channel input state:
	331	+** DI1 is floating when there is no load between DI1 and V+.
	332	+** DI1 is high when there is load between DI1 and V+.
	333	+** DI1 LED is ON in both cases.
	334	+* [0] DO3 channel output state:
335	335	** DO3 is float in case no load between DO3 and V+.
336	336	** DO3 is high in case there is load between DO3 and V+.
337		-** DO3 LED is off in both case
338		-* [1] DO2 channel output is low and DO2 LED is ON.
339		-* [0] DO1 channel output state
340		-** DO1 is float in case no load between DO1 and V+.
341		-** DO1 is high in case there is load between DO1 and V+.
342		-** DO1 LED is off in both case.
	337	+** DO3 LED is OFF in both case
	338	+* [1] DO2 channel output is low, and the DO2 LED is ON.
	339	+* [0] DO1 channel output state:
	340	+** DO1 is floating when there is no load between DO1 and V+.
	341	+** DO1 is high when there is load between DO1 and V+.
	342	+** DO1 LED is OFF in both case.
343	343
344	344	=== 3.3.2 AT+MOD~=2, (Double DI Counting) ===
345	345
346	346
347	347	(((
348		-**For LT-22222-L**: this mode the **DI1 and DI2** are used as counting pins.
	348	+**For LT-22222-L**: In this mode, the **DI1 and DI2** are used as counting pins.
349	349	)))
350	350
351	351	(((
352		-Total : 11 bytes payload
	352	+The uplink payload is 11 bytes long.
353	353
354	354	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
355	355	|(% style="background-color:#4f81bd; color:white" %)**Size(bytes)**|(% style="background-color:#4f81bd; color:white" %)**4**|(% style="background-color:#4f81bd; color:white" %)**4**|(% style="background-color:#4f81bd; color:white" %)**1**|(% style="background-color:#4f81bd; color:white" %)**1**|(% style="background-color:#4f81bd; color:white" %)**1**
...	...	@@ -359,26 +359,26 @@
359	359	)))
360	360
361	361	(((
362		-(% style="color:#4f81bd" %)**DIDORO**(%%) is a combination for RO1, RO2, DO3, DO2 and DO1. Totally 1bytes as below
	362	+(% style="color:#4f81bd" %)***DIDORO**(%%) is a combination for RO1, RO2, DO3, DO2 and DO1, for a total of 1 byte, as shown below.
363	363
364	364	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
365		-|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
366		-|RO1|RO2|FIRST|Reserve|Reserve|DO3|DO2|DO1
	365	+|**bit 7**|**bit 6**|**bit 5**|**bit 4**|**bit 3**|**bit 2**|**bit 1**|**bit 0**
	366	+|RO1|RO2|FIRST|Reserve|Reserve|--DO3--|DO2|DO1
367	367
368		-RO is for relay. ROx=1 : close , ROx=0 always open.
	368	+* RO is for relay. ROx=1 : closed, ROx=0 always open.
369	369	)))
370	370
371		-* FIRST: Indicate this is the first packet after join network.
372		-* DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
	371	+* FIRST: Indicates that this is the first packet after joining the network.
	372	+* DO is for reverse digital output. DOx=1: output low, DOx=0: high or floating.
373	373
374	374	(((
375		-(% style="color:red" %)**Note: DO3 bit is not valid for LT-22222-L.**
	375	+(% style="color:red" %)**Note: DO3 bit is not valid for LT-22222-L**
376	376
377	377
378	378	)))
379	379
380	380	(((
381		-**To use counting mode, please run:**
	381	+**To activate this mode, please run the following AT command:**
382	382	)))
383	383
384	384	(((
...	...	@@ -399,17 +399,17 @@
399	399	(((
400	400	**For LT22222-L:**
401	401
402		-(% style="color:blue" %)**AT+TRIG1=0,100**(%%)**  (set DI1 port to trigger on low level, valid signal is 100ms) **
	402	+(% style="color:blue" %)**AT+TRIG1=0,100**(%%)**  (set the DI1 port to trigger on a low level, the valid signal duration is 100ms) **
403	403
404		-(% style="color:blue" %)**AT+TRIG1=1,100**(%%)**  (set DI1 port to trigger on high level, valid signal is 100ms ) **
	404	+(% style="color:blue" %)**AT+TRIG1=1,100**(%%)**  (set the DI1 port to trigger on a high level, the valid signal duration is 100ms) **
405	405
406		-(% style="color:blue" %)**AT+TRIG2=0,100**(%%)**  (set DI2 port to trigger on low level, valid signal is 100ms) **
	406	+(% style="color:blue" %)**AT+TRIG2=0,100**(%%)**  (set the DI2 port to trigger on a low level, the valid signal duration is 100ms) **
407	407
408		-(% style="color:blue" %)**AT+TRIG2=1,100**(%%)**  (set DI2 port to trigger on high level, valid signal is 100ms ) **
	408	+(% style="color:blue" %)**AT+TRIG2=1,100**(%%)**  (set the DI2 port to trigger on a high level, the valid signal duration is 100ms) **
409	409
410		-(% style="color:blue" %)**AT+SETCNT=1,60**(%%)**   (Set COUNT1 value to 60)**
	410	+(% style="color:blue" %)**AT+SETCNT=1,60**(%%)**   (Set the COUNT1 value to 60)**
411	411
412		-(% style="color:blue" %)**AT+SETCNT=2,60**(%%)**   (Set COUNT2 value to 60)**
	412	+(% style="color:blue" %)**AT+SETCNT=2,60**(%%)**   (Set the COUNT2 value to 60)**
413	413	)))
414	414
415	415
...	...	@@ -416,7 +416,7 @@
416	416	=== 3.3.3 AT+MOD~=3, Single DI Counting + 2 x ACI ===
417	417
418	418
419		-**LT22222-L**: This mode the DI1 is used as a counting pin.
	419	+**LT22222-L**: In this mode, the DI1 is used as a counting pin.
420	420
421	421	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
422	422	|(% style="background-color:#4f81bd; color:white" %)**Size(bytes)**|(% style="background-color:#4f81bd; color:white" %)**4**|(% style="background-color:#4f81bd; color:white" %)**2**|(% style="background-color:#4f81bd; color:white" %)**2**|(% style="background-color:#4f81bd; color:white" %)**1**|(% style="background-color:#4f81bd; color:white" %)**1**|(% style="background-color:#4f81bd; color:white" %)**1**
...	...	@@ -427,16 +427,16 @@
427	427	)))|DIDORO*|Reserve|MOD
428	428
429	429	(((
430		-(% style="color:#4f81bd" %)**DIDORO**(%%) is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1. Totally 1bytes as below
	430	+(% style="color:#4f81bd" %)***DIDORO**(%%) is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1, for a total of 1 byte, as shown below.
431	431
432	432	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
433		-|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
434		-|RO1|RO2|FIRST|Reserve|Reserve|DO3|DO2|DO1
	433	+|**bit 7**|**bit 6**|**bit 5**|**bit 4**|**bit 3**|**bit 2**|**bit 1**|**bit 0**
	434	+|RO1|RO2|FIRST|Reserve|Reserve|--DO3--|DO2|DO1
435	435	)))
436	436
437		-* RO is for relay. ROx=1 : close, ROx=0 always open.
438		-* FIRST: Indicate this is the first packet after join network.
439		-* DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
	437	+* RO is for relay. ROx=1 : closed, ROx=0 always open.
	438	+* FIRST: Indicates that this is the first packet after joining the network.
	439	+* DO is for reverse digital output. DOx=1: output low, DOx=0: high or floating.
440	440
441	441	(((
442	442	(% style="color:red" %)**Note: DO3 is not valid for LT-22222-L.**
...	...	@@ -444,7 +444,7 @@
444	444
445	445
446	446	(((
447		-**To use counting mode, please run:**
	447	+**To activate this mode, please run the following AT command:**
448	448	)))
449	449
450	450	(((
...	...	@@ -457,7 +457,9 @@
457	457	)))
458	458
459	459	(((
460		-Other AT Commands for counting are similar to [[MOD2 Counting Command>>||anchor="H3.3.2AT2BMOD3D22C28DoubleDICounting29"]].
	460	+AT Commands for counting:
	461	+
	462	+The AT Commands for counting are similar to [[MOD2 Counting Command>>||anchor="H3.3.2AT2BMOD3D22C28DoubleDICounting29"]]. Use only the commands that match 'DI'.
461	461	)))
462	462
463	463
...	...	@@ -465,11 +465,11 @@
465	465
466	466
467	467	(((
468		-**LT22222-L**: This mode the DI1 is used as a counting pin.
	470	+**LT22222-L**: In this mode, the DI1 is used as a counting pin.
469	469	)))
470	470
471	471	(((
472		-The AVI1 is also used for counting. AVI1 is used to monitor the voltage. It will check the voltage **every 60s**, if voltage is higher or lower than VOLMAX mV, the AVI1 Counting increase 1, so AVI1 counting can be used to measure a machine working hour.
	474	+The AVI1 is also used for counting. It monitors the voltage and checks it every **60 seconds**. If the voltage is higher or lower than VOLMAX mV, the AVI1 count increases by 1, allowing AVI1 counting to be used to measure a machine's working hours.
473	473
474	474	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
475	475	|(% style="background-color:#4f81bd; color:white" %)**Size(bytes)**|(% style="background-color:#4f81bd; color:white" %)**4**|(% style="background-color:#4f81bd; color:white" %)**4**|(% style="background-color:#4f81bd; color:white" %)**1**|(% style="background-color:#4f81bd; color:white" %)**1**|(% style="background-color:#4f81bd; color:white" %)**1**
...	...	@@ -479,16 +479,16 @@
479	479	)))
480	480
481	481	(((
482		-(% style="color:#4f81bd" %)**DIDORO **(%%)is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1. Totally 1bytes as below
	484	+(% style="color:#4f81bd" %)**DIDORO **(%%)is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1, for a total of 1 byte, as shown below.
483	483
484	484	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
485		-|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
486		-|RO1|RO2|FIRST|Reserve|Reserve|DO3|DO2|DO1
	487	+|**bit 7**|**bit 6**|**bit 5**|**bit 4**|**bit 3**|**bit 2**|**bit 1**|**bit 0**
	488	+|RO1|RO2|FIRST|Reserve|Reserve|--DO3--|DO2|DO1
487	487	)))
488	488
489		-* RO is for relay. ROx=1 : close, ROx=0 always open.
490		-* FIRST: Indicate this is the first packet after join network.
491		-* DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
	491	+* RO is for relay. ROx=1 : closed, ROx=0 always open.
	492	+* FIRST: Indicates that this is the first packet after joining the network.
	493	+* DO is for reverse digital output. DOx=1: output low, DOx=0: high or floating.
492	492
493	493	(((
494	494	(% style="color:red" %)**Note: DO3 is not valid for LT-22222-L.**
...	...	@@ -497,7 +497,7 @@
497	497	)))
498	498
499	499	(((
500		-**To use this mode, please run:**
	502	+**To activate this mode, please run the following AT command:**
501	501	)))
502	502
503	503	(((
...	...	@@ -514,9 +514,9 @@
514	514	)))
515	515
516	516	(((
517		-**Plus below command for AVI1 Counting:**
	519	+**In addition to that, below are the commands for AVI1 Counting:**
518	518
519		-(% style="color:blue" %)**AT+SETCNT=3,60**(%%)**  (set AVI Count to 60)**
	521	+(% style="color:blue" %)**AT+SETCNT=3,60**(%%)**  (set AVI Count to 60)**
520	520
521	521	(% style="color:blue" %)**AT+VOLMAX=20000**(%%)**  (If AVI1 voltage higher than VOLMAX (20000mV =20v), counter increase 1)**
522	522