Last modified by Saxer Lin on 2025/04/15 17:24
<
From version < 134.1 >
edited by Edwin Chen
on 2024/05/08 22:32
To version < 146.1 >
edited by Dilisi S
on 2024/10/31 22:08
>
Change comment: Uploaded new attachment "thingseye-io-step-2.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.pradeeka
Content
... ... @@ -19,36 +19,30 @@
19 19  
20 20  = 1.Introduction =
21 21  
22 -== 1.1 What is LT Series I/O Controller ==
22 +== 1.1 What is the LT-22222-L I/O Controller? ==
23 23  
24 24  (((
25 -
26 -
27 27  (((
28 -The Dragino (% style="color:blue" %)**LT series I/O Modules**(%%) are Long Range LoRaWAN I/O Controller. It contains different I/O Interfaces such as:** (% style="color:blue" %)analog current Input, analog voltage input(%%)**(% style="color:blue" %), **relay output**, **digital input**(%%) and (% style="color:blue" %)**digital output**(%%) etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring.
29 -)))
30 -)))
26 +The Dragino (% style="color:blue" %)**LT-22222-L I/O Controller**(%%) is an advanced LoRaWAN device designed to provide seamless wireless long-range connectivity with various I/O options, including analog current and voltage inputs, digital inputs and outputs, and relay outputs.
31 31  
32 -(((
33 -The LT I/O Controllers allows the user to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
28 +The LT-22222-L I/O Controller simplifies and enhances I/O monitoring and controlling. It is ideal for professional applications in wireless sensor networks, including irrigation systems, smart metering, smart cities, building automation, and more. These controllers are designed for easy, cost-effective deployment using LoRa wireless technology.
34 34  )))
35 -
36 -(((
37 -The LT I/O Controllers is aiming to provide an (% style="color:blue" %)**easy and low cost installation** (%%)by using LoRa wireless technology.
38 38  )))
39 39  
40 40  (((
41 -The use environment includes:
33 +With the LT-22222-L I/O Controller, users can transmit data over ultra-long distances with low power consumption using LoRa, a spread-spectrum modulation technique derived from chirp spread spectrum (CSS) technology that operates on license-free ISM bands.
42 42  )))
43 43  
44 -(((
45 -1) If user's area has LoRaWAN service coverage, they can just install the I/O controller and configure it to connect the LoRaWAN provider via wireless.
46 -)))
36 +> The LT Series I/O Controllers are designed for easy, low-cost installation on LoRaWAN networks.
47 47  
48 48  (((
49 -2) User can set up a LoRaWAN gateway locally and configure the controller to connect to the gateway via wireless.
39 +You can connect the LT-22222-L I/O Controller to a LoRaWAN network service provider in several ways:
50 50  
51 -
41 +* If there is public LoRaWAN network coverage in the area where you plan to install the device (e.g., The Things Network), you can select a network and register the LT-22222-L I/O controller with it.
42 +* If there is no public LoRaWAN coverage in your area, you can set up a LoRaWAN gateway, or multiple gateways, and connect them to a LoRaWAN network server to create adequate coverage. Then, register the LT-22222-L I/O controller with this network.
43 +* Setup your own private LoRaWAN network.
44 +
45 +> You can use the Dragino LG308 gateway to expand or create LoRaWAN coverage in your area.
52 52  )))
53 53  
54 54  (((
... ... @@ -68,7 +68,6 @@
68 68  ** 20dB Transmit: 34mA@12v
69 69  * Operating Temperature: -40 ~~ 85 Degree, No Dew
70 70  
71 -
72 72  (% style="color:#037691" %)**Interface for Model: LT22222-L:**
73 73  
74 74  * 2 x Digital dual direction Input (Detect High/Low signal, Max: 50v, or 220v with optional external resistor)
... ... @@ -78,7 +78,6 @@
78 78  * 2 x 0~~30V Analog Input (res:0.01v)
79 79  * Power Input 7~~ 24V DC. 
80 80  
81 -
82 82  (% style="color:#037691" %)**LoRa Spec:**
83 83  
84 84  * Frequency Range:
... ... @@ -136,76 +136,124 @@
136 136  * 1 x Counting Port
137 137  )))
138 138  
139 -= 2. Power ON Device =
131 += 2. Assembling the Device =
140 140  
141 -The LT controller can be powered by 7 ~~ 24V DC power source. Connect VIN to Power Input V+ and GND to power input V- to power the LT controller.
133 +== 2.1 What is included in the package? ==
142 142  
143 -PWR will on when device is properly powered.
135 +The package includes the following items:
144 144  
145 -[[image:1653297104069-180.png]]
137 +* 1 x LT-22222-L I/O Controller
138 +* 1 x LoRaWAN antenna matched to the frequency of the LT-22222-L
139 +* 1 x bracket for wall mounting
140 +* 1 x programming cable
146 146  
142 +Attach the LoRaWAN antenna to the connector labeled **ANT** (located on the top right side of the device, next to the upper terminal block). Secure the antenna by tightening it clockwise.
147 147  
148 -= 3. Operation Mode =
144 +== 2.2 Terminals ==
149 149  
150 -== 3.1 How it works? ==
146 +Upper screw terminal block (from left to right):
151 151  
148 +(% style="width:634px" %)
149 +|=(% style="width: 295px;" %)Terminal|=(% style="width: 338px;" %)Function
150 +|(% style="width:295px" %)GND|(% style="width:338px" %)Ground
151 +|(% style="width:295px" %)VIN|(% style="width:338px" %)Input Voltage
152 +|(% style="width:295px" %)AVI2|(% style="width:338px" %)Analog Voltage Input Terminal 2
153 +|(% style="width:295px" %)AVI1|(% style="width:338px" %)Analog Voltage Input Terminal 1
154 +|(% style="width:295px" %)ACI2|(% style="width:338px" %)Analog Current Input Terminal 2
155 +|(% style="width:295px" %)ACI1|(% style="width:338px" %)Analog Current Input Terminal 1
152 152  
153 -(((
154 -The LT is configured as LoRaWAN OTAA Class C mode by default. It has OTAA keys to join network. To connect a local LoRaWAN network, user just need to input the OTAA keys in the network server and power on the LT. It will auto join the network via OTAA. For LT-22222-L, the LED will show the Join status: After power on (% style="color:green" %)**TX LED**(%%) will fast blink 5 times, LT-22222-L will enter working mode and start to JOIN LoRaWAN network. (% style="color:green" %)**TX LED**(%%) will be on for 5 seconds after joined in network. When there is message from server, the RX LED will be on for 1 second. 
155 -)))
157 +Lower screw terminal block (from left to right):
156 156  
157 -(((
158 -In case user can't set the OTAA keys in the network server and has to use the existing keys from server. User can [[use AT Command>>||anchor="H4.UseATCommand"]] to set the keys in the devices.
159 -)))
159 +(% style="width:633px" %)
160 +|=(% style="width: 296px;" %)Terminal|=(% style="width: 334px;" %)Function
161 +|(% style="width:296px" %)RO1-2|(% style="width:334px" %)Relay Output 1
162 +|(% style="width:296px" %)RO1-1|(% style="width:334px" %)Relay Output 1
163 +|(% style="width:296px" %)RO2-2|(% style="width:334px" %)Relay Output 2
164 +|(% style="width:296px" %)RO2-1|(% style="width:334px" %)Relay Output 2
165 +|(% style="width:296px" %)DI2+|(% style="width:334px" %)Digital Input 2
166 +|(% style="width:296px" %)DI2-|(% style="width:334px" %)Digital Input 2
167 +|(% style="width:296px" %)DI1+|(% style="width:334px" %)Digital Input 1
168 +|(% style="width:296px" %)DI1-|(% style="width:334px" %)Digital Input 1
169 +|(% style="width:296px" %)DO2|(% style="width:334px" %)Digital Output 2
170 +|(% style="width:296px" %)DO1|(% style="width:334px" %)Digital Output 1
160 160  
172 +== 2.3 Powering ==
161 161  
162 -== 3.2 Example to join LoRaWAN network ==
174 +The LT-22222-L I/O Controller can be powered by a 7–24V DC power source. Connect the power supply’s positive wire to the VIN screw terminal and the negative wire to the GND screw terminal. The power indicator (PWR) LED will turn on when the device is properly powered.
163 163  
164 164  
165 -(((
166 -This chapter shows an example for how to join the TTN LoRaWAN Network. Below is the network structure, we use our LG308 as LoRaWAN gateway here. 
177 +[[image:1653297104069-180.png]]
167 167  
168 -
169 -)))
170 170  
171 -[[image:image-20220523172350-1.png||height="266" width="864"]]
180 += 3. Operation Mode =
172 172  
182 +== 3.1 How does it work? ==
173 173  
174 -(((
175 -The LG308 is already set to connect to [[TTN network >>url:https://www.thethingsnetwork.org/]]. So what we need to do now is only configure register this device to TTN:
184 +The LT-22222-L is configured to operate in LoRaWAN Class C mode by default. It supports OTAA (Over-the-Air Activation), which is the most secure method for activating a device with a LoRaWAN network server. The LT-22222-L comes with device registration information that allows you to register it with a LoRaWAN network, enabling the device to perform OTAA activation with the network server upon initial power-up and after any subsequent reboots.
176 176  
177 -
178 -)))
186 +For LT-22222-L, the LED will show the Join status: After power on (% style="color:green" %)**TX LED**(%%) will fast blink 5 times, LT-22222-L will enter working mode and start to JOIN LoRaWAN network. (% style="color:green" %)**TX LED**(%%) will be on for 5 seconds after joined in network. When there is message from server, the RX LED will be on for 1 second. 
179 179  
180 -(((
181 -(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LT IO controller.
182 -)))
188 +In case you can't set the root key and other identifiers in the network server and must use them from the server, you can use [[AT Commands>>||anchor="H4.UseATCommand"]] to configure them on the device.
183 183  
184 -(((
185 -Each LT is shipped with a sticker with the default device EUI as below:
186 -)))
190 +== 3.2 Registering with a LoRaWAN network server ==
187 187  
192 +The diagram below shows how the LT-22222-L connects to a typical LoRaWAN network.
193 +
194 +[[image:image-20220523172350-1.png||height="266" width="864"]]
195 +
196 +=== 3.2.1 Prerequisites ===
197 +
198 +Make sure you have the device registration information such as DevEUI, AppEUI, and AppKey with you. The registration information can be found on a sticker that can be found inside the package. Please keep the **registration information** sticker in a safe place for future reference.
199 +
188 188  [[image:image-20230425173427-2.png||height="246" width="530"]]
189 189  
202 +The following subsections explain how to register the LT-22222-L with different LoRaWAN network server providers.
190 190  
191 -Input these keys in the LoRaWAN Server portal. Below is TTN screen shot:
204 +=== 3.2.2 The Things Stack Sandbox (TTSS) ===
192 192  
193 -**Add APP EUI in the application.**
206 +* Log in to your [[The Things Stack Sandbox>>https://eu1.cloud.thethings.network]] account.
207 +* Create an application if you do not have one yet.
208 +* Register LT-22222-L with that application. Two registration options available:
194 194  
195 -[[image:1653297955910-247.png||height="321" width="716"]]
210 +==== Using the LoRaWAN Device Repository: ====
196 196  
212 +* Go to your application and click on the **Register end device** button.
213 +* On the **Register end device** page:
214 +** Select the option **Select the end device in the LoRaWAN Device Repository**.
215 +** Choose the **End device brand**, **Model**, **Hardware version**, **Firmware version**, and **Profile (Region)**.
216 +** Select the **Frequency plan** that matches with your device.
197 197  
198 -**Add APP KEY and DEV EUI**
218 +[[image:lt-22222-l-dev-repo-reg-p1.png||height="625" width="1000"]]
199 199  
200 -[[image:1653298023685-319.png]]
220 +*
221 +** Enter the **AppEUI** in the **JoinEUI** field and click **Confirm** button.
222 +** Enter the **DevEUI** in the **DevEUI** field.
223 +** Enter the **AppKey** in the **AppKey** field.
224 +** In the **End device ID** field, enter a unique name within this application for your LT-22222-N.
225 +** Under **After registration**, select the **View registered end device** option.
201 201  
227 +[[image:lt-22222-l-dev-repo-reg-p2.png||height="625" width="1000"]]
202 202  
203 -(((
204 -(% style="color:blue" %)**Step 2**(%%): Power on LT and it will auto join to the TTN network. After join success, it will start to upload message to TTN and user can see in the panel.
229 +==== Entering device information manually: ====
205 205  
206 -
207 -)))
231 +* On the **Register end device** page:
232 +** Select the **Enter end device specified manually** option.
233 +** Select the **Frequency plan** that matches with your device.
234 +** Select the **LoRaWAN version**.
235 +** Select the **Regional Parameters version**.
236 +** Click **Show advanced activation, LoRaWAN class and cluster settings** option.
237 +** Select **Over the air activation (OTAA)** option under **Activation mode**
238 +** Select **Class C (Continuous)** from the **Additional LoRaWAN class capabilities**.
239 +** Enter **AppEUI** in the **JoinEUI** field and click **Confirm** button.
240 +** Enter **DevEUI** in the **DevEUI** field.
241 +** Enter **AppKey** in the **AppKey** field.
242 +** In the **End device ID** field, enter a unique name within this application for your LT-22222-N.
243 +** Under **After registration**, select the **View registered end device** option.
208 208  
245 +==== Joining ====
246 +
247 +Click on **Live Data** in the left navigation. Then, power on the device, and it will join The Things Stack Sandbox. You can see the join request, join accept, followed by uplink messages form the device showing in the Live Data panel.
248 +
209 209  [[image:1653298044601-602.png||height="405" width="709"]]
210 210  
211 211  
... ... @@ -1571,9 +1571,6 @@
1571 1571  (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1572 1572  |(% style="background-color:#4f81bd; color:white; width:50px" %)**LEDs**|(% style="background-color:#4f81bd; color:white; width:460px" %)**Feature**
1573 1573  |**PWR**|Always on if there is power
1574 -|**SYS**|(((
1575 -After device is powered on, the SYS will **fast blink in GREEN** for 5 times, means RS485-LN start to join LoRaWAN network. If join success, SYS will be **on GREEN for 5 seconds. **SYS will **blink Blue** on every upload and **blink Green** once receive a downlink message.
1576 -)))
1577 1577  |**TX**|(((
1578 1578  (((
1579 1579  Device boot: TX blinks 5 times.
... ... @@ -1588,20 +1588,16 @@
1588 1588  )))
1589 1589  )))
1590 1590  |**RX**|RX blinks once when receive a packet.
1591 -|**DO1**|
1592 -|**DO2**|
1593 -|**DO3**|
1594 -|**DI2**|(((
1595 -For LT-22222-L: ON when DI2 is high, LOW when DI2 is low
1628 +|**DO1**|For LT-22222-L: ON when DO1 is low, LOW when DO1 is high
1629 +|**DO2**|For LT-22222-L: ON when DO2 is low, LOW when DO2 is high
1630 +|**DI1**|(((
1631 +For LT-22222-L: ON when DI1 is high, LOW when DI1 is low
1596 1596  )))
1597 1597  |**DI2**|(((
1598 -For LT-22222-L: ON when DI2 is high, LOW when DI2 is low
1634 +For LT-22222-L: ON when DI2 is high, LOW when DI2 is low
1599 1599  )))
1600 -|**DI2**|(((
1601 -For LT-22222-L: ON when DI2 is high, LOW when DI2 is low
1602 -)))
1603 -|**RO1**|
1604 -|**RO2**|
1636 +|**RO1**|For LT-22222-L: ON when RO1 is closed, LOW when RO1 is open
1637 +|**RO2**|For LT-22222-L: ON when RO2 is closed, LOW when RO2 is open
1605 1605  
1606 1606  = 4. Use AT Command =
1607 1607  
lt-22222-l-dev-repo-p1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +391.8 KB
Content
lt-22222-l-dev-repo-reg-p1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +391.7 KB
Content
lt-22222-l-dev-repo-reg-p2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +319.1 KB
Content
thingseye-io-step-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +191.8 KB
Content
thingseye-io-step-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.pradeeka
Size
... ... @@ -1,0 +1,1 @@
1 +260.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0