Last modified by Saxer Lin on 2025/04/15 17:24
<
From version < 118.1 >
edited by Ellie Zhang
on 2023/05/09 09:04
To version < 123.1 >
edited by Bei Jinggeng
on 2023/06/16 16:46
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Ellie
1 +XWiki.Bei
Content
... ... @@ -280,7 +280,7 @@
280 280  Each LT is shipped with a sticker with the default device EUI as below:
281 281  )))
282 282  
283 -[[image:image-20230425173427-2.png]]
283 +[[image:image-20230425173427-2.png||height="246" width="530"]]
284 284  
285 285  
286 286  Input these keys in the LoRaWAN Server portal. Below is TTN screen shot:
... ... @@ -311,10 +311,15 @@
311 311  There are five working modes + one interrupt mode on LT for different type application:
312 312  
313 313  * (% style="color:blue" %)**MOD1**(%%): (default setting): 2 x ACI + 2AVI + DI + DO + RO
314 +
314 314  * (% style="color:blue" %)**MOD2**(%%): Double DI Counting + DO + RO
316 +
315 315  * (% style="color:blue" %)**MOD3**(%%): Single DI Counting + 2 x ACI + DO + RO
318 +
316 316  * (% style="color:blue" %)**MOD4**(%%): Single DI Counting + 1 x Voltage Counting + DO + RO
320 +
317 317  * (% style="color:blue" %)**MOD5**(%%): Single DI Counting + 2 x AVI + 1 x ACI + DO + RO
322 +
318 318  * (% style="color:blue" %)**ADDMOD6**(%%): Trigger Mode, Optional, used together with MOD1 ~~ MOD5
319 319  
320 320  
... ... @@ -322,19 +322,31 @@
322 322  
323 323  
324 324  (((
325 -The uplink payload includes totally 9 bytes. Uplink packets use FPORT=2 and every 10 minutes send one uplink by default.
330 +The uplink payload includes totally 9 bytes. Uplink packets use FPORT=2 and every 10 minutes send one uplink by default. (% style="display:none" %)
331 +
332 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
333 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**
334 +|Value|(((
335 +AVI1 voltage
336 +)))|(((
337 +AVI2 voltage
338 +)))|(((
339 +ACI1 Current
340 +)))|(((
341 +ACI2 Current
342 +)))|DIDORO*|(((
343 +Reserve
344 +)))|MOD
326 326  )))
327 327  
328 -[[image:image-20220523174024-3.png]]
329 -
330 330  (((
331 -
332 -
333 333  (% style="color:#4f81bd" %)**DIDORO**(%%) is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1. Totally 1bytes as below
349 +
350 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
351 +|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
352 +|RO1|RO2|DI3|DI2|DI1|DO3|DO2|DO1
334 334  )))
335 335  
336 -[[image:image-20220523174254-4.png]]
337 -
338 338  * RO is for relay. ROx=1 : close，ROx=0 always open.
339 339  * DI is for digital input. DIx=1: high or float, DIx=0: low.
340 340  * DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
... ... @@ -384,18 +384,24 @@
384 384  
385 385  (((
386 386  Total : 11 bytes payload
404 +
405 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
406 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0" %)**4**|(% style="background-color:#d9e2f3; color:#0070c0" %)**4**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**
407 +|Value|COUNT1|COUNT2 |DIDORO*|(((
408 +Reserve
409 +)))|MOD
387 387  )))
388 388  
389 -[[image:image-20220523180452-3.png]]
390 -
391 -
392 392  (((
393 393  (% style="color:#4f81bd" %)**DIDORO**(%%) is a combination for RO1, RO2, DO3, DO2 and DO1. Totally 1bytes as below
394 -)))
395 395  
396 -[[image:image-20220523180506-4.png]]
415 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
416 +|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
417 +|RO1|RO2|FIRST|Reserve|Reserve|DO3|DO2|DO1
397 397  
398 -* RO is for relay. ROx=1 : close，ROx=0 always open.
419 +RO is for relay. ROx=1 : close，ROx=0 always open.
420 +)))
421 +
399 399  * FIRST: Indicate this is the first packet after join network.
400 400  * DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
401 401  
... ... @@ -426,14 +426,11 @@
426 426  
427 427  
428 428  (% style="color:#4f81bd" %)**AT Commands for counting:**
429 -
430 -
431 431  )))
432 432  
433 433  (((
434 434  **For LT22222-L:**
435 435  
436 -
437 437  (% style="color:blue" %)**AT+TRIG1=0,100**(%%)**  (set DI1 port to trigger on low level, valid signal is 100ms) **
438 438  
439 439  (% style="color:blue" %)**AT+TRIG1=1,100**(%%)**  (set DI1 port to trigger on high level, valid signal is 100ms ) **
... ... @@ -453,16 +453,22 @@
453 453  
454 454  **LT22222-L**: This mode the DI1 is used as a counting pin.
455 455  
456 -[[image:image-20220523181246-5.png]]
476 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
477 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0" %)**4**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**
478 +|Value|COUNT1|(((
479 +ACI1 Current
480 +)))|(((
481 +ACI2 Current
482 +)))|DIDORO*|Reserve|MOD
457 457  
458 458  (((
459 -
460 -
461 461  (% style="color:#4f81bd" %)**DIDORO**(%%) is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1. Totally 1bytes as below
486 +
487 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
488 +|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
489 +|RO1|RO2|FIRST|Reserve|Reserve|DO3|DO2|DO1
462 462  )))
463 463  
464 -[[image:image-20220523181301-6.png]]
465 -
466 466  * RO is for relay. ROx=1 : close，ROx=0 always open.
467 467  * FIRST: Indicate this is the first packet after join network.
468 468  * DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
... ... @@ -503,17 +503,22 @@
503 503  
504 504  (((
505 505  The AVI1 is also used for counting. AVI1 is used to monitor the voltage. It will check the voltage **every 60s**, if voltage is higher or lower than VOLMAX mV, the AVI1 Counting increase 1, so AVI1 counting can be used to measure a machine working hour.
532 +
533 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
534 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0" %)**4**|(% style="background-color:#d9e2f3; color:#0070c0" %)**4**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**
535 +|Value|COUNT1|AVI1 Counting|DIDORO*|(((
536 +Reserve
537 +)))|MOD
506 506  )))
507 507  
508 -[[image:image-20220523181903-8.png]]
509 -
510 -
511 511  (((
512 512  (% style="color:#4f81bd" %)**DIDORO **(%%)is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1. Totally 1bytes as below
542 +
543 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
544 +|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
545 +|RO1|RO2|FIRST|Reserve|Reserve|DO3|DO2|DO1
513 513  )))
514 514  
515 -[[image:image-20220523181727-7.png]]
516 -
517 517  * RO is for relay. ROx=1 : close，ROx=0 always open.
518 518  * FIRST: Indicate this is the first packet after join network.
519 519  * DO is for reverse digital output. DOx=1: output low, DOx=0: high or float.
... ... @@ -547,11 +547,8 @@
547 547  )))
548 548  
549 549  (((
550 -
551 -
552 552  **Plus below command for AVI1 Counting:**
553 553  
554 -
555 555  (% style="color:blue" %)**AT+SETCNT=3,60**(%%)**  (set AVI Count to 60)**
556 556  
557 557  (% style="color:blue" %)**AT+VOLMAX=20000**(%%)**  (If AVI1 voltage higher than VOLMAX (20000mV =20v), counter increase 1)**
... ... @@ -567,12 +567,24 @@
567 567  
568 568  **LT22222-L**: This mode the DI1 is used as a counting pin.
569 569  
570 -[[image:image-20220523182334-9.png]]
598 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
599 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**1**
600 +|Value|(((
601 +AVI1 voltage
602 +)))|(((
603 +AVI2 voltage
604 +)))|(((
605 +ACI1 Current
606 +)))|COUNT1|DIDORO*|(((
607 +Reserve
608 +)))|MOD
571 571  
572 572  (((
573 -
574 -
575 575  (% style="color:#4f81bd" %)**DIDORO**(%%) is a combination for RO1, RO2, DI3, DI2, DI1, DO3, DO2 and DO1. Totally 1bytes as below
612 +
613 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
614 +|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
615 +|RO1|RO2|FIRST|Reserve|Reserve|DO3|DO2|DO1
576 576  )))
577 577  
578 578  * RO is for relay. ROx=1 : close，ROx=0 always open.
... ... @@ -697,12 +697,39 @@
697 697  
698 698  MOD6 Payload : total 11 bytes payload
699 699  
700 -[[image:image-20220524085923-1.png]]
740 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
741 +|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**6**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**1**
742 +|Value|(((
743 +TRI_A FLAG
744 +)))|(((
745 +TRI_A Status
746 +)))|(((
747 +TRI_DI FLAG+STA
748 +)))|Reserve|Enable/Disable MOD6|(((
749 +MOD(6)
750 +)))
701 701  
702 -
703 703  (% style="color:#4f81bd" %)**TRI FLAG1**(%%) is a combination to show if trigger is set for this part. Totally 1byte as below
704 704  
705 -[[image:image-20220524090106-2.png]]
754 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
755 +|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
756 +|(((
757 +AV1_LOW
758 +)))|(((
759 +AV1_HIGH
760 +)))|(((
761 +AV2_LOW
762 +)))|(((
763 +AV2_HIGH
764 +)))|(((
765 +AC1_LOW
766 +)))|(((
767 +AC1_HIGH
768 +)))|(((
769 +AC2_LOW
770 +)))|(((
771 +AC2_HIGH
772 +)))
706 706  
707 707  * Each bits shows if the corresponding trigger has been configured.
708 708  
... ... @@ -711,10 +711,27 @@
711 711  10100000: Means the system has configure to use the trigger: AC1_LOW and AV2_LOW
712 712  
713 713  
714 -
715 715  (% style="color:#4f81bd" %)**TRI Status1**(%%) is a combination to show which condition is trigger. Totally 1byte as below
716 716  
717 -[[image:image-20220524090249-3.png]]
783 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
784 +|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
785 +|(((
786 +AV1_LOW
787 +)))|(((
788 +AV1_HIGH
789 +)))|(((
790 +AV2_LOW
791 +)))|(((
792 +AV2_HIGH
793 +)))|(((
794 +AC1_LOW
795 +)))|(((
796 +AC1_HIGH
797 +)))|(((
798 +AC2_LOW
799 +)))|(((
800 +AC2_HIGH
801 +)))
718 718  
719 719  * Each bits shows which status has been trigger on this uplink.
720 720  
... ... @@ -725,7 +725,9 @@
725 725  
726 726  (% style="color:#4f81bd" %)**TRI_DI FLAG+STA **(%%)is a combination to show which condition is trigger. Totally 1byte as below
727 727  
728 -[[image:image-20220524090456-4.png]]
812 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
813 +|**bit7**|**bit6**|**bit5**|**bit4**|**bit3**|**bit2**|**bit1**|**bit0**
814 +|N/A|N/A|N/A|N/A|DI2_STATUS|DI2_FLAG|DI1_STATUS|DI1_FLAG
729 729  
730 730  * Each bits shows which status has been trigger on this uplink.
731 731  
... ... @@ -806,14 +806,10 @@
806 806  
807 807  Set work mode.
808 808  
809 -* (% style="color:#037691" %)**AT Command:**
895 +* (% style="color:#037691" %)**AT Command:**(%%) (% style="color:blue" %)**AT+MOD=N  **
810 810  
811 -(% style="color:blue" %)**AT+MOD=N  **
812 -
813 -
814 814  **Example**: AT+MOD=2. Set work mode to Double DI counting mode
815 815  
816 -
817 817  * (% style="color:#037691" %)**Downlink Payload (prefix 0x0A):**
818 818  
819 819  (% style="color:blue" %)**0x0A aa  **(%%)** ** ~/~/ Same as AT+MOD=aa
... ... @@ -823,16 +823,12 @@
823 823  ==== 3.4.2.3 Poll an uplink ====
824 824  
825 825  
826 -* (% style="color:#037691" %)**AT Command:**
908 +* (% style="color:#037691" %)**AT Command:**(%%) There is no AT Command to poll uplink
827 827  
828 -There is no AT Command to poll uplink
829 -
830 -
831 831  * (% style="color:#037691" %)**Downlink Payload (prefix 0x08):**
832 832  
833 833  (% style="color:blue" %)**0x08 FF  **(%%)** **~/~/ Poll an uplink
834 834  
835 -
836 836  **Example**: 0x08FF, ask device to send an Uplink
837 837  
838 838  
... ... @@ -842,10 +842,8 @@
842 842  
843 843  Use of trigger mode, please check [[ADDMOD6>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
844 844  
845 -* (% style="color:#037691" %)**AT Command:**
923 +* (% style="color:#037691" %)**AT Command:**(%%) (% style="color:blue" %)**AT+ADDMOD6=1 or 0**
846 846  
847 -(% style="color:blue" %)**AT+ADDMOD6=1 or 0**
848 -
849 849  (% style="color:red" %)**1:** (%%)Enable Trigger Mode
850 850  
851 851  (% style="color:red" %)**0: **(%%)Disable Trigger Mode
... ... @@ -860,13 +860,12 @@
860 860  ==== 3.4.2.5 Poll trigger settings ====
861 861  
862 862  
863 -Poll trigger settings,
939 +Poll trigger settings
864 864  
865 865  * (% style="color:#037691" %)**AT Command:**
866 866  
867 867  There is no AT Command for this feature.
868 868  
869 -
870 870  * (% style="color:#037691" %)**Downlink Payload (prefix 0x AB 06):**
871 871  
872 872  (% style="color:blue" %)**0xAB 06  ** (%%) ~/~/ Poll trigger settings, device will uplink trigger settings once receive this command
... ... @@ -878,15 +878,11 @@
878 878  
879 879  Enable Disable DI1/DI2/DI2 as trigger,
880 880  
881 -* (% style="color:#037691" %)**AT Command:**
956 +* (% style="color:#037691" %)**AT Command:**(%%) (% style="color:blue" %)**Format: AT+DTRI=<DI1_TIRGGER_FlAG>,< DI2_TIRGGER_FlAG >**
882 882  
883 -(% style="color:blue" %)**Format: AT+DTRI=<DI1_TIRGGER_FlAG>,< DI2_TIRGGER_FlAG >**
958 +**Example:** AT+ DTRI =1,0   (Enable DI1 trigger / disable DI2 trigger)
884 884  
885 885  
886 -**Example:**
887 -
888 -AT+ DTRI =1,0   (Enable DI1 trigger / disable DI2 trigger)
889 -
890 890  * (% style="color:#037691" %)**Downlink Payload (prefix 0xAA 02):**
891 891  
892 892  (% style="color:blue" %)**0xAA 02 aa bb   ** (%%) ~/~/ Same as AT+DTRI=aa,bb
... ... @@ -898,20 +898,15 @@
898 898  
899 899  Set DI1 or DI3(for LT-33222-L) trigger.
900 900  
901 -* (% style="color:#037691" %)**AT Command:**
972 +* (% style="color:#037691" %)**AT Command:**(%%) (% style="color:blue" %)**AT+TRIG1=a,b**
902 902  
903 -(% style="color:blue" %)**AT+TRIG1=a,b**
904 -
905 905  (% style="color:red" %)**a :** (%%)Interrupt mode. 0: falling edge; 1: rising edge, 2: falling and raising edge(for MOD=1).
906 906  
907 907  (% style="color:red" %)**b :** (%%)delay timing.
908 908  
978 +**Example:** AT+TRIG1=1,100(set DI1 port to trigger on high level, valid signal is 100ms )
909 909  
910 -**Example:**
911 911  
912 -AT+TRIG1=1,100(set DI1 port to trigger on high level, valid signal is 100ms )
913 -
914 -
915 915  * (% style="color:#037691" %)**Downlink Payload (prefix 0x09 01 ):**
916 916  
917 917  (% style="color:blue" %)**0x09 01 aa bb cc    ** (%%) ~/~/ same as AT+TRIG1=aa,0x(bb cc)
... ... @@ -923,20 +923,15 @@
923 923  
924 924  Set DI2 trigger.
925 925  
926 -* (% style="color:#037691" %)**AT Command:**
992 +* (% style="color:#037691" %)**AT Command:**(%%) (% style="color:blue" %)**AT+TRIG2=a,b**
927 927  
928 -(% style="color:blue" %)**AT+TRIG2=a,b**
929 -
930 930  (% style="color:red" %)**a :** (%%)Interrupt mode. 0: falling edge; 1: rising edge, 2: falling and raising edge(for MOD=1).
931 931  
932 932  (% style="color:red" %)**b :** (%%)delay timing.
933 933  
998 +**Example:** AT+TRIG2=0,100(set DI1 port to trigger on low level, valid signal is 100ms )
934 934  
935 -**Example:**
936 936  
937 -AT+TRIG2=0,100(set DI1 port to trigger on low level, valid signal is 100ms )
938 -
939 -
940 940  * (% style="color:#037691" %)**Downlink Payload (prefix 0x09 02 ):**
941 941  
942 942  (% style="color:blue" %)**0x09 02 aa bb cc   ** (%%)~/~/ same as AT+TRIG2=aa,0x(bb cc)
... ... @@ -948,11 +948,8 @@
948 948  
949 949  Set current trigger , base on AC port. See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
950 950  
951 -* (% style="color:#037691" %)**AT Command**
1012 +* (% style="color:#037691" %)**AT Command:**(%%) (% style="color:blue" %)**AT+ACLIM**
952 952  
953 -(% style="color:blue" %)**AT+ACLIM**
954 -
955 -
956 956  * (% style="color:#037691" %)**Downlink Payload (prefix 0xAA 01 )**
957 957  
958 958  (% style="color:blue" %)**0x AA 01 aa bb cc dd ee ff gg hh        ** (%%) ~/~/ same as AT+ACLIM See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
... ... @@ -964,11 +964,8 @@
964 964  
965 965  Set current trigger , base on AV port. See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
966 966  
967 -* (% style="color:#037691" %)**AT Command**
1025 +* (% style="color:#037691" %)**AT Command**(%%): (% style="color:blue" %)**AT+AVLIM    **(%%)** See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]**
968 968  
969 -(% style="color:blue" %)**AT+AVLIM    **(%%)** See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]**
970 -
971 -
972 972  * (% style="color:#037691" %)**Downlink Payload (prefix 0xAA 00 )**
973 973  
974 974  (% style="color:blue" %)**0x AA 00 aa bb cc dd ee ff gg hh    ** (%%) ~/~/ same as AT+AVLIM See [[trigger mode>>||anchor="H3.3.6AT2BADDMOD3D6.28TriggerMode2COptional29"]]
... ... @@ -980,18 +980,13 @@
980 980  
981 981  Set AV and AC trigger minimum interval, system won't response to the second trigger within this set time after the first trigger.
982 982  
983 -* (% style="color:#037691" %)**AT Command**
1038 +* (% style="color:#037691" %)**AT Command**(%%): (% style="color:blue" %)**AT+ATDC=5        ** ~/~/ (%%)Device won't response the second trigger within 5 minute after the first trigger.
984 984  
985 -(% style="color:blue" %)**AT+ATDC=5        ** (%%)Device won't response the second trigger within 5 minute after the first trigger.
986 -
987 -
988 988  * (% style="color:#037691" %)**Downlink Payload (prefix 0xAC )**
989 989  
990 990  (% style="color:blue" %)**0x AC aa bb   **(%%) ~/~/ same as AT+ATDC=0x(aa bb)   . Unit (min)
991 991  
992 992  (((
993 -
994 -
995 995  (% style="color:red" %)**Note: ATDC setting must be more than 5min**
996 996  )))
997 997  
... ... @@ -1006,8 +1006,9 @@
1006 1006  
1007 1007  
1008 1008  * (% style="color:#037691" %)**Downlink Payload (prefix 0x02)**
1009 -* (% style="color:blue" %)**0x02 aa bb cc     ** (%%)~/~/ Set DO1/DO2/DO3 output
1010 1010  
1060 +(% style="color:blue" %)**0x02 aa bb cc     ** (%%)~/~/ Set DO1/DO2/DO3 output
1061 +
1011 1011  (((
1012 1012  If payload = 0x02010001, while there is load between V+ and DOx, it means set DO1 to low, DO2 to high and DO3 to low.
1013 1013  )))
... ... @@ -1014,10 +1014,14 @@
1014 1014  
1015 1015  (((
1016 1016  01: Low,  00: High ,  11: No action
1068 +
1069 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
1070 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Downlink Code**|(% style="background-color:#d9e2f3; color:#0070c0" %)**DO1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**DO2**|(% style="background-color:#d9e2f3; color:#0070c0" %)**DO3**
1071 +|02  01  00  11|Low|High|No Action
1072 +|02  00  11  01|High|No Action|Low
1073 +|02  11  01  00|No Action|Low|High
1017 1017  )))
1018 1018  
1019 -[[image:image-20220524092754-5.png]]
1020 -
1021 1021  (((
1022 1022  (% style="color:red" %)**Note: For LT-22222-L, there is no DO3, the last byte can use any value.**
1023 1023  )))
... ... @@ -1054,24 +1054,31 @@
1054 1054  
1055 1055  (% style="color:#4f81bd" %)**Third Byte**(%%): Control Method and Ports status:
1056 1056  
1057 -[[image:image-20220524093238-6.png]]
1112 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:300px" %)
1113 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Second Byte**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Status**
1114 +|0x01|DO1 set to low
1115 +|0x00|DO1 set to high
1116 +|0x11|DO1 NO Action
1058 1058  
1059 -
1060 1060  (% style="color:#4f81bd" %)**Fourth Byte**(%%): Control Method and Ports status:
1061 1061  
1062 -[[image:image-20220524093328-7.png]]
1120 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:300px" %)
1121 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Second Byte**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Status**
1122 +|0x01|DO2 set to low
1123 +|0x00|DO2 set to high
1124 +|0x11|DO2 NO Action
1063 1063  
1064 -
1065 1065  (% style="color:#4f81bd" %)**Fifth Byte**(%%): Control Method and Ports status:
1066 1066  
1067 -[[image:image-20220524093351-8.png]]
1128 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:300px" %)
1129 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Second Byte**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Status**
1130 +|0x01|DO3 set to low
1131 +|0x00|DO3 set to high
1132 +|0x11|DO3 NO Action
1068 1068  
1134 +(% style="color:#4f81bd" %)**Sixth and Seventh and Eighth and Ninth Byte**:(%%) Latching time. Unit: ms
1069 1069  
1070 -(% style="color:#4f81bd" %)**Sixth and Seventh and Eighth and Ninth Byte**:
1071 1071  
1072 - Latching time. Unit: ms
1073 -
1074 -
1075 1075  (% style="color:red" %)**Note: **
1076 1076  
1077 1077   Since Firmware v1.6.0, the latch time support 4 bytes and 2 bytes
... ... @@ -1078,7 +1078,6 @@
1078 1078  
1079 1079   Before Firmwre v1.6.0 the latch time only suport 2 bytes.
1080 1080  
1081 -
1082 1082  (% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
1083 1083  
1084 1084  
... ... @@ -1121,10 +1121,17 @@
1121 1121  
1122 1122  (((
1123 1123  01: Close ,  00: Open , 11: No action
1124 -)))
1125 1125  
1126 -(((
1127 -[[image:image-20230426161322-1.png]]
1186 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:320px" %)
1187 +|(% style="background-color:#d9e2f3; color:#0070c0" %)**Downlink Code**|(% style="background-color:#d9e2f3; color:#0070c0" %)**RO1**|(% style="background-color:#d9e2f3; color:#0070c0" %)**RO2**
1188 +|03  00  11|Open|No Action
1189 +|03  01  11|Close|No Action
1190 +|03  11  00|No Action|Open
1191 +|03  11  01|No Action|Close
1192 +|03  00  00|Open|Open
1193 +|03  01  01|Close|Close
1194 +|03  01  00|Close|Open
1195 +|03  00  01|Open|Close
1128 1128  )))
1129 1129  
1130 1130  (% style="color:red" %)**Device will upload a packet if downlink code executes successfully.**
... ... @@ -1198,11 +1198,8 @@
1198 1198  
1199 1199  When voltage exceed the threshold, count. Feature see [[MOD4>>||anchor="H3.3.4AT2BMOD3D42CSingleDICounting2B1xVoltageCounting"]]
1200 1200  
1201 -* (% style="color:#037691" %)**AT Command:**
1269 +* (% style="color:#037691" %)**AT Command:**(%%) (% style="color:blue" %)**AT+VOLMAX   ** (%%)~/~/ See [[MOD4>>||anchor="H3.3.4AT2BMOD3D42CSingleDICounting2B1xVoltageCounting"]]
1202 1202  
1203 -(% style="color:blue" %)**AT+VOLMAX   ** (%%)~/~/ See [[MOD4>>||anchor="H3.3.4AT2BMOD3D42CSingleDICounting2B1xVoltageCounting"]]
1204 -
1205 -
1206 1206  * (% style="color:#037691" %)**Downlink Payload (prefix 0xA5):**
1207 1207  
1208 1208  (% style="color:blue" %)**0xA5 aa bb cc   ** (%%)~/~/ Same as AT+VOLMAX=(aa bb),cc
... ... @@ -1212,10 +1212,8 @@
1212 1212  ==== 3.4.2.17 Counting ~-~- Pre-configure the Count Number ====
1213 1213  
1214 1214  
1215 -* (% style="color:#037691" %)**AT Command:**
1280 +* (% style="color:#037691" %)**AT Command:**(%%) (% style="color:blue" %)**AT+SETCNT=aa,(bb cc dd ee) **
1216 1216  
1217 -(% style="color:blue" %)**AT+SETCNT=aa,(bb cc dd ee) **
1218 -
1219 1219  (% style="color:red" %)**aa:**(%%) 1: Set count1; 2: Set count2; 3: Set AV1 count
1220 1220  
1221 1221  (% style="color:red" %)**bb cc dd ee: **(%%)number to be set
... ... @@ -1232,11 +1232,8 @@
1232 1232  
1233 1233  Clear counting for counting mode
1234 1234  
1235 -* (% style="color:#037691" %)**AT Command:**
1298 +* (% style="color:#037691" %)**AT Command:**(%%) (% style="color:blue" %)**AT+CLRCOUNT         **(%%) ~/~/ clear all counting
1236 1236  
1237 -(% style="color:blue" %)**AT+CLRCOUNT **(%%) ~/~/ clear all counting
1238 -
1239 -
1240 1240  * (% style="color:#037691" %)**Downlink Payload (prefix 0xA6):**
1241 1241  
1242 1242  (% style="color:blue" %)**0x A6 01    ** (%%)~/~/ clear all counting
... ... @@ -1388,7 +1388,7 @@
1388 1388  
1389 1389  (% style="color:blue" %)**Step 3**(%%): Create an account or log in Mydevices.
1390 1390  
1391 -(% style="color:blue" %)**Step 4**(%%): Search LT-22222-L(for both LT-22222-L / LT-33222-L) and add DevEUI.(% style="display:none" %)
1451 +(% style="color:blue" %)**Step 4**(%%): Search LT-22222-L(for both LT-22222-L) and add DevEUI.(% style="display:none" %)
1392 1392  
1393 1393  Search under The things network
1394 1394  
... ... @@ -1573,7 +1573,6 @@
1573 1573  
1574 1574  **Black:  GND**
1575 1575  
1576 -
1577 1577  **Connection diagram:**
1578 1578  
1579 1579  [[image:1653357640609-758.png]]
... ... @@ -1581,6 +1581,22 @@
1581 1581  [[image:1653357648330-671.png||height="155" width="733"]]
1582 1582  
1583 1583  
1643 +Example connected to a regulated power supply to measure voltage
1644 +
1645 +[[image:image-20230608101532-1.png||height="606" width="447"]]
1646 +
1647 +[[image:image-20230608101608-2.jpeg||height="379" width="284"]]
1648 +
1649 +[[image:image-20230608101722-3.png||height="102" width="1139"]]
1650 +
1651 +
1652 +(% style="color:blue; font-weight:bold" %)**Specifications of the regulated power**(%%) (% style="color:blue" %)**:**
1653 +
1654 +(% style="color:red" %)**Red:  12~~24v**
1655 +
1656 +**Black:  GND**
1657 +
1658 +
1584 1584  === 3.6.5 Relay Output ===
1585 1585  
1586 1586  
... ... @@ -1599,9 +1599,42 @@
1599 1599  == 3.7 LEDs Indicators ==
1600 1600  
1601 1601  
1602 -[[image:image-20220524100748-11.png]]
1677 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
1678 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**LEDs**|(% style="background-color:#d9e2f3; color:#0070c0; width:470px" %)**Feature**
1679 +|**PWR**|Always on if there is power
1680 +|**SYS**|(((
1681 +After device is powered on, the SYS will **fast blink in GREEN** for 5 times, means RS485-LN start to join LoRaWAN network. If join success, SYS will be **on GREEN for 5 seconds. **SYS will **blink Blue** on every upload and **blink Green** once receive a downlink message.
1682 +)))
1683 +|**TX**|(((
1684 +(((
1685 +Device boot: TX blinks 5 times.
1686 +)))
1603 1603  
1688 +(((
1689 +Successful join network: TX ON for 5 seconds.
1690 +)))
1604 1604  
1692 +(((
1693 +Transmit a LoRa packet: TX blinks once
1694 +)))
1695 +)))
1696 +|**RX**|RX blinks once when receive a packet.
1697 +|**DO1**|
1698 +|**DO2**|
1699 +|**DO3**|
1700 +|**DI2**|(((
1701 +For LT-22222-L: ON when DI2 is high, LOW when DI2 is low
1702 +)))
1703 +|**DI2**|(((
1704 +For LT-22222-L: ON when DI2 is high, LOW when DI2 is low
1705 +)))
1706 +|**DI2**|(((
1707 +For LT-22222-L: ON when DI2 is high, LOW when DI2 is low
1708 +)))
1709 +|**RO1**|
1710 +|**RO2**|
1711 +
1712 +
1605 1605  = 4. Use AT Command =
1606 1606  
1607 1607  == 4.1 Access AT Command ==
... ... @@ -1982,7 +1982,7 @@
1982 1982  
1983 1983  (((
1984 1984  (% style="color:blue" %)**Step1**(%%)**:** Download [[flash loader>>url:https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/flasher-stm32.html]].
1985 -(% style="color:blue" %)**Step2**(%%)**:** Download the [[LT Image files>>url:https://www.dropbox.com/sh/g99v0fxcltn9r1y/AADKXQ2v5ZT-S3sxdmbvE7UAa/LT-22222-L/image?dl=0&subfolder_nav_tracking=1]].
2093 +(% style="color:blue" %)**Step2**(%%)**:** Download the [[LT Image files>>https://www.dropbox.com/sh/g99v0fxcltn9r1y/AACrbrDN0AqLHbBat0ViWx5Da/LT-22222-L/Firmware?dl=0&subfolder_nav_tracking=1]].
1986 1986  (% style="color:blue" %)**Step3**(%%)**:** Open flashloader; choose the correct COM port to update.
1987 1987  
1988 1988  
... ... @@ -2219,7 +2219,7 @@
2219 2219  Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
2220 2220  )))
2221 2221  * (((
2222 -Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
2330 +Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]]
2223 2223  
2224 2224  
2225 2225  
... ... @@ -2231,3 +2231,5 @@
2231 2231  * LT-22222-L: [[http:~~/~~/www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/156-lt-22222-l.html]]
2232 2232  * [[Datasheet, Document Base>>https://www.dropbox.com/sh/gxxmgks42tqfr3a/AACEdsj_mqzeoTOXARRlwYZ2a?dl=0]]
2233 2233  * [[Hardware Source>>url:https://github.com/dragino/Lora/tree/master/LT/LT-33222-L/v1.0]]
2342 +
2343 +
image-20230608101532-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +563.0 KB
Content
image-20230608101608-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +287.8 KB
Content
image-20230608101722-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +25.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0