Changes for page LT-22222-L -- LoRa I/O Controller User Manual

Last modified by Saxer Lin on 2025/04/15 17:24

From version < 101.2 >

edited by Xiaoling
on 2022/10/13 16:38

To version < 102.2 >

edited by Xiaoling
on 2022/10/29 09:42

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -21,8 +21,10 @@
  (((
++(((
  The Dragino (% style="color:blue" %)**LT series I/O Modules**(%%) are Long Range LoRaWAN I/O Controller. It contains different I/O Interfaces such as:** (% style="color:blue" %)analog current Input, analog voltage input(%%)**(% style="color:blue" %), **relay output**, **digital input**(%%) and (% style="color:blue" %)**digital output**(%%) etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring.
  )))
++)))
  (((
  The LT I/O Controllers allows the user to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
@@ -186,6 +186,7 @@
++
  == 1.4  Applications ==
@@ -198,6 +198,7 @@
++
  == 1.5 Hardware Variants ==
@@ -214,10 +214,13 @@
++
  = 2. Power ON Device =
++(((
  The LT controller can be powered by 7 ~~ 24V DC power source. Connect VIN to Power Input V+ and GND to power input V- to power the LT controller.
++)))
  (((
  PWR will on when device is properly powered.
@@ -276,12 +276,12 @@
  Input these keys in the LoRaWAN Server portal. Below is TTN screen shot:
--Add APP EUI in the application.
++**Add APP EUI in the application.**
  [[image:1653297955910-247.png||height="321" width="716"]]
--Add APP KEY and DEV EUI
++**Add APP KEY and DEV EUI**
  [[image:1653298023685-319.png]]
@@ -289,6 +289,8 @@
  (((
  (% style="color:blue" %)**Step 2**(%%): Power on LT and it will auto join to the TTN network. After join success, it will start to upload message to TTN and user can see in the panel.
++
++
  )))
  [[image:1653298044601-602.png||height="405" width="709"]]
@@ -309,10 +309,13 @@
++
  === 3.3.1 AT+MOD~=1, 2ACI+2AVI ===
++(((
  The uplink payload includes totally 9 bytes. Uplink packets use FPORT=2 and every 10 minutes send one uplink by default.
++)))
  [[image:image-20220523174024-3.png]]
@@ -348,8 +348,6 @@
  * [1] RO1 relay channel is close and the RO1 LED is ON.
  * [0] RO2 relay channel is open and RO2 LED is OFF;
--
--
  **LT22222-L:**
  * [1] DI2 channel is high input and DI2 LED is ON;
@@ -366,10 +366,14 @@
  ** DO1 LED is off in both case
++
++
  === 3.3.2 AT+MOD~=2, (Double DI Counting) ===
++(((
  **For LT-22222-L**: this mode the **DI1 and DI2** are used as counting pins.
++)))
  (((
  Total : 11 bytes payload
@@ -401,11 +401,15 @@
  (% class="box infomessage" %)
  (((
  (((
++(((
  **AT+MOD=2**
++)))
++(((
  **ATZ**
  )))
  )))
++)))
  (((
@@ -465,11 +465,15 @@
  (% class="box infomessage" %)
  (((
  (((
++(((
  **AT+MOD=3**
++)))
++(((
  **ATZ**
  )))
  )))
++)))
  (((
  Other AT Commands for counting are similar to [[MOD2 Counting Command>>||anchor="H3.3.2AT2BMOD3D22C28DoubleDICounting29"]].
@@ -480,9 +480,13 @@
  === 3.3.4 AT+MOD~=4, Single DI Counting + 1 x Voltage Counting ===
++(((
  **LT22222-L**: This mode the DI1 is used as a counting pin.
++)))
++(((
  The AVI1 is also used for counting. AVI1 is used to monitor the voltage. It will check the voltage **every 60s**, if voltage is higher or lower than VOLMAX mV, the AVI1 Counting increase 1, so AVI1 counting can be used to measure a machine working hour.
++)))
  [[image:image-20220523181903-8.png]]
@@ -510,14 +510,17 @@
  (% class="box infomessage" %)
  (((
  (((
++(((
  **AT+MOD=4**
++)))
++(((
  **ATZ**
  )))
  )))
++)))
--
  (((
  Other AT Commands for counting are similar to [[MOD2 Counting Command>>||anchor="H3.3.2AT2BMOD3D22C28DoubleDICounting29"]].
  )))
@@ -571,11 +571,15 @@
  (% class="box infomessage" %)
  (((
  (((
++(((
  **AT+MOD=5**
++)))
++(((
  **ATZ**
  )))
  )))
++)))
  (((
  Other AT Commands for counting are similar to [[MOD2 Counting Command>>||anchor="H3.3.2AT2BMOD3D22C28DoubleDICounting29"]].
@@ -723,7 +723,6 @@
--
  === 3.3.7 Payload Decoder ===
  (((
@@ -737,15 +737,19 @@
  == 3.4 Configure LT via AT or Downlink ==
++(((
  User can configure LT I/O Controller via AT Commands or LoRaWAN Downlink Commands
++)))
  (((
++(((
  There are two kinds of Commands:
  )))
++)))
--* (% style="color:#4f81bd" %)**Common Commands**(%%): They should be available for each sensor, such as: change uplink interval, reset device. For firmware v1.5.4, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
++* (% style="color:blue" %)**Common Commands**(%%): They should be available for each sensor, such as: change uplink interval, reset device. For firmware v1.5.4, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
--* (% style="color:#4f81bd" %)**Sensor Related Commands**(%%): These commands are special designed for LT-22222-L.  User can see these commands below:
++* (% style="color:blue" %)**Sensor Related Commands**(%%): These commands are special designed for LT-22222-L.  User can see these commands below:
@@ -752,7 +752,9 @@
  === 3.4.1 Common Commands ===
++(((
  They should be available for each of Dragino Sensors, such as: change uplink interval, reset device. For firmware v1.5.4, user can find what common commands it supports: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
++)))
@@ -766,7 +766,7 @@
  * (% style="color:#037691" %)**AT Command:**
--**AT+TDC=N **
++**(% style="color:blue" %)AT+TDC=N **
  **Example: **AT+TDC=30000. Means set interval to 30 seconds
@@ -774,7 +774,7 @@
  * (% style="color:#037691" %)**Downlink Payload (prefix 0x01):**
--**0x01 aa bb cc     ~/~/ Same as AT+TDC=0x(aa bb cc)**
++**(% style="color:blue" %)0x01 aa bb cc  (%%)   ~/~/ Same as AT+TDC=0x(aa bb cc)**
@@ -786,7 +786,7 @@
  * (% style="color:#037691" %)**AT Command:**
--**AT+MOD=N  **
++**(% style="color:blue" %)AT+MOD=N  **
  **Example**: AT+MOD=2. Set work mode to Double DI counting mode
@@ -794,7 +794,7 @@
  * (% style="color:#037691" %)**Downlink Payload (prefix 0x0A):**
--**0x0A aa    ** ~/~/ Same as AT+MOD=aa
++**(% style="color:blue" %)0x0A aa  (%%)  ** ~/~/ Same as AT+MOD=aa
@@ -809,7 +809,7 @@
  * (% style="color:#037691" %)**Downlink Payload (prefix 0x08):**
--**0x08 FF     **~/~/ Poll an uplink
++**(% style="color:blue" %)0x08 FF  (%%)   **~/~/ Poll an uplink
  **Example**: 0x08FF, ask device to send an Uplink
@@ -824,16 +824,16 @@
  * (% style="color:#037691" %)**AT Command:**
--**AT+ADDMOD6=1 or 0**
++**(% style="color:blue" %)AT+ADDMOD6=1 or 0**
--1: Enable Trigger Mode
++**(% style="color:red" %)1:** Enable Trigger Mode
--0: Disable Trigger Mode
++**(% style="color:red" %)0: **Disable Trigger Mode
  * (% style="color:#037691" %)**Downlink Payload (prefix 0x0A 06):**
--**0x0A 06 aa    ** ~/~/ Same as AT+ADDMOD6=aa
++**(% style="color:blue" %)0x0A 06 aa    **(%%)    ~/~/ Same as AT+ADDMOD6=aa
@@ -850,7 +850,7 @@
  * (% style="color:#037691" %)**Downlink Payload (prefix 0x AB 06):**
--**0xAB 06         **~/~/ Poll trigger settings, device will uplink trigger settings once receive this command
++**(% style="color:blue" %)0xAB 06  **  (%%)   ~/~/ Poll trigger settings, device will uplink trigger settings once receive this command
@@ -871,7 +871,7 @@
  * (% style="color:#037691" %)**Downlink Payload (prefix 0xAA 02):**
--**0xAA 02 aa bb        **~/~/ Same as AT+DTRI=aa,bb
++**(% style="color:blue" %)0xAA 02 aa bb   **  (%%) ~/~/ Same as AT+DTRI=aa,bb
@@ -883,7 +883,7 @@
  * (% style="color:#037691" %)**AT Command:**
--**AT+TRIG1=a,b**
++**(% style="color:blue" %)AT+TRIG1=a,b**
  a : Interrupt mode. 0: falling edge; 1: rising edge, 2: falling and raising edge(for MOD=1).
@@ -898,8 +898,6 @@
  * (% style="color:#037691" %)**Downlink Payload (prefix 0x09 01 ):**
  * **0x09 01 aa bb cc    **     ~/~/ same as AT+TRIG1=aa,0x(bb cc)
--
--
  ==== 3.4.2.8 Trigger2 – Set DI2 as trigger ====
@@ -1565,13 +1565,13 @@
  We take the wind speed sensor as an example for reference only.
--**Specifications of the wind speed sensor:**
++(% style="color:blue" %)**Specifications of the wind speed sensor:**
--Red:      12~~24v
++**Red:      12~~24v**
--Yellow:  4~~20mA
++**Yellow:  4~~20mA**
--Black:   GND
++**Black:   GND**
  **Connection diagram:**
@@ -1609,8 +1609,14 @@
  == 4.1 Access AT Command ==
++(((
  LT supports AT Command set. User can use a USB to TTL adapter plus the 3.5mm Program Cable to connect to LT for using AT command, as below.
++)))
++(((
++
++)))
++
  [[image:1653358238933-385.png]]
@@ -1638,7 +1638,7 @@
  )))
  (((
--AT+<CMD>=?       : Get the value
++AT+<CMD>=?       :  Get the value
  )))
  (((
@@ -1666,11 +1666,11 @@
  )))
  (((
--AT+APPSKEY: Get or Set the Application Session Key
++AT+APPSKEY:  Get or Set the Application Session Key
  )))
  (((
--AT+APPEUI: Get or Set the Application EUI
++AT+APPEUI:    Get or Set the Application EUI
  )))
  (((
@@ -1682,7 +1682,7 @@
  )))
  (((
--AT+DR: Get or Set the Data Rate. (0-7 corresponding to DR_X)
++AT+DR:  Get or Set the Data Rate. (0-7 corresponding to DR_X)
  )))
  (((
@@ -1718,7 +1718,7 @@
  )))
  (((
--AT+NJM: Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
++AT+NJM:    Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
  )))
  (((
@@ -1762,7 +1762,7 @@
  )))
  (((
--AT+VER: Get current image version and Frequency Band
++AT+VER:  Get current image version and Frequency Band
  )))
  (((
@@ -1770,7 +1770,7 @@
  )))
  (((
--AT+CFS: Get confirmation status of the last AT+SEND (0-1)
++AT+CFS:  Get confirmation status of the last AT+SEND (0-1)
  )))
  (((
@@ -1819,40 +1819,42 @@
  (((
--**If device has not joined network yet:**
++(((
++(% style="color:blue" %)**If device has not joined network yet:**
  )))
++)))
  (((
--(% style="background-color:#dcdcdc" %)123456
++(% style="background-color:#dcdcdc" %)**123456**
  )))
  (((
--(% style="background-color:#dcdcdc" %)AT+FDR
++(% style="background-color:#dcdcdc" %)**AT+FDR**
  )))
  (((
--(% style="background-color:#dcdcdc" %)123456
++(% style="background-color:#dcdcdc" %)**123456**
  )))
  (((
--(% style="background-color:#dcdcdc" %)AT+NJM=0
++(% style="background-color:#dcdcdc" %)**AT+NJM=0**
  )))
  (((
--(% style="background-color:#dcdcdc" %)ATZ
++(% style="background-color:#dcdcdc" %)**ATZ**
  )))
  (((
--**If device already joined network:**
++(% style="color:blue" %)**If device already joined network:**
  )))
  (((
--(% style="background-color:#dcdcdc" %)AT+NJM=0
++(% style="background-color:#dcdcdc" %)**AT+NJM=0**
  )))
  (((
--(% style="background-color:#dcdcdc" %)ATZ
++(% style="background-color:#dcdcdc" %)**ATZ**
  )))
@@ -1862,55 +1862,57 @@
  (((
--(% style="background-color:#dcdcdc" %)123456(%%)     Enter Password to have AT access.
++(((
++(% style="background-color:#dcdcdc" %)**123456**(%%)        ~/~/ Enter Password to have AT access.
  )))
++)))
  (((
--(% style="background-color:#dcdcdc" %) AT+FDR(%%)   Reset Parameters to Factory Default, Keys Reserve
++(% style="background-color:#dcdcdc" %)** AT+FDR**(%%)     ~/~/ Reset Parameters to Factory Default, Keys Reserve
  )))
  (((
--(% style="background-color:#dcdcdc" %) 123456(%%)     Enter Password to have AT access.
++(% style="background-color:#dcdcdc" %)** 123456**(%%)       ~/~/ Enter Password to have AT access.
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+CLASS=C(%%) Set to work in CLASS C
++(% style="background-color:#dcdcdc" %)** AT+CLASS=C**(%%)   ~/~/ Set to work in CLASS C
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+NJM=0(%%)    Set to ABP mode
++(% style="background-color:#dcdcdc" %)** AT+NJM=0**(%%)     ~/~/ Set to ABP mode
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+ADR=0(%%)    Set the Adaptive Data Rate Off
++(% style="background-color:#dcdcdc" %) **AT+ADR=0**(%%)     ~/~/ Set the Adaptive Data Rate Off
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+DR=5(%%)       Set Data Rate
++(% style="background-color:#dcdcdc" %)** AT+DR=5**(%%)       ~/~/ Set Data Rate
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+TDC=60000(%%)              Set transmit interval to 60 seconds
++(% style="background-color:#dcdcdc" %)** AT+TDC=60000**(%%)              ~/~/ Set transmit interval to 60 seconds
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+CHS=868400000(%%)      Set transmit frequency to 868.4Mhz
++(% style="background-color:#dcdcdc" %)** AT+CHS=868400000**(%%)     ~/~/ Set transmit frequency to 868.4Mhz
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+RX2FQ=868400000(%%)  Set RX2Frequency to 868.4Mhz (according to the result from server)
++(% style="background-color:#dcdcdc" %)** AT+RX2FQ=868400000**(%%)    ~/~/ Set RX2Frequency to 868.4Mhz (according to the result from server)
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+RX2DR=5(%%)                  Set RX2DR to match the downlink DR from server. see below
++(% style="background-color:#dcdcdc" %)** AT+RX2DR=5**(%%)** **                   ~/~/ Set RX2DR to match the downlink DR from server. see below
  )))
  (((
--(% style="background-color:#dcdcdc" %) AT+DADDR=26 01 1A F1 (%%)  Set Device Address to 26 01 1A F1, this ID can be found in the LoRa Server portal.
++(% style="background-color:#dcdcdc" %)** AT+DADDR=26 01 1A F1** (%%)     ~/~/ Set Device Address to 26 01 1A F1, this ID can be found in the LoRa Server portal.
  )))
  (((
--(% style="background-color:#dcdcdc" %) ATZ         (%%)                             Reset MCU
++(% style="background-color:#dcdcdc" %)** ATZ**         (%%)                                 ~/~/ Reset MCU
  )))
@@ -1920,11 +1920,15 @@
  )))
  (((
--(% style="color:red" %)1. Make sure the device is set to ABP mode in the IoT Server.
--2. Make sure the LG01/02 gateway RX frequency is exactly the same as AT+CHS setting.
--3. Make sure SF / bandwidth setting in LG01/LG02 match the settings of AT+DR. refer [[this link>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_Gateway/&file=LoRaWAN%201.0.3%20Regional%20Parameters.xlsx]] to see what DR means.
--4. The command AT+RX2FQ and AT+RX2DR is to let downlink work. to set the correct parameters, user can check the actually downlink parameters to be used. As below. Which shows the RX2FQ should use 868400000 and RX2DR should be 5
++**~1. Make sure the device is set to ABP mode in the IoT Server.**
++**2. Make sure the LG01/02 gateway RX frequency is exactly the same as AT+CHS setting.**
++
++**3. Make sure SF / bandwidth setting in LG01/LG02 match the settings of AT+DR. refer [[this link>>url:http://www.dragino.com/downloads/index.php?
++dir=LoRa_Gateway/&file=LoRaWAN%201.0.3%20Regional%20Parameters.xlsx]] to see what DR means.**
++
++**4. The command AT+RX2FQ and AT+RX2DR is to let downlink work. to set the correct parameters, user can check the actually downlink parameters to be used. As below. Which shows the RX2FQ should use 868400000 and RX2DR should be 5**
++
  )))
@@ -1940,12 +1940,15 @@
  === 4.2.3 Change to Class A ===
--If sensor JOINED
--(% style="background-color:#dcdcdc" %)AT+CLASS=A
--ATZ
++(((
++(% style="color:blue" %)If sensor JOINED:
++(% style="background-color:#dcdcdc" %)**AT+CLASS=A
++ATZ**
++)))
++
  = 5. FAQ =
@@ -1969,8 +1969,10 @@
  (% style="color:blue" %)**Step3**(%%)**:** Open flashloader; choose the correct COM port to update.
++(((
  (% style="color:blue" %)**For LT-22222-L**(%%):
  Hold down the PRO button and then momentarily press the RST reset button and the (% style="color:red" %)**DO1 led**(%%) will change from OFF to ON. When (% style="color:red" %)**DO1 LED**(%%) is on, it means the device is in download mode.
++)))
  )))
@@ -2051,16 +2051,15 @@
  )))
  (((
--(% style="background-color:#dcdcdc" %)123456 (%%)     Enter Password to have AT access.
--(% style="background-color:#dcdcdc" %)AT+FDR(%%)     Reset Parameters to Factory Default, Keys Reserve
--(% style="background-color:#dcdcdc" %)123456 (%%)     Enter Password to have AT access.
--(% style="background-color:#dcdcdc" %)AT+NJM=0 (%%)    Set to ABP mode
--(% style="background-color:#dcdcdc" %)AT+ADR=0 (%%)    Set the Adaptive Data Rate Off
--(% style="background-color:#dcdcdc" %)AT+DR=5 (%%)      Set Data Rate (Set AT+DR=3 for 915 band)
--(% style="background-color:#dcdcdc" %)AT+TDC=60000 (%%)         Set transmit interval to 60 seconds
--(% style="background-color:#dcdcdc" %)AT+CHS=868400000(%%)  Set transmit frequency to 868.4Mhz
--(% style="background-color:#dcdcdc" %)AT+DADDR=26 01 1A F1(%%)    Set Device Address to 26 01 1A F1
--(% style="background-color:#dcdcdc" %)ATZ        (%%)                              Reset MCU
++(% style="background-color:#dcdcdc" %)**123456** (%%)   :   Enter Password to have AT access.
++(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)   :   Reset Parameters to Factory Default, Keys Reserve
++(% style="background-color:#dcdcdc" %)**AT+NJM=0** (%%) :   Set to ABP mode
++(% style="background-color:#dcdcdc" %)**AT+ADR=0** (%%)  :  Set the Adaptive Data Rate Off
++(% style="background-color:#dcdcdc" %)**AT+DR=5** (%%)    :   Set Data Rate (Set AT+DR=3 for 915 band)
++(% style="background-color:#dcdcdc" %)**AT+TDC=60000 **(%%)   :      Set transmit interval to 60 seconds
++(% style="background-color:#dcdcdc" %)**AT+CHS=868400000**(%%) : Set transmit frequency to 868.4Mhz
++(% style="background-color:#dcdcdc" %)**AT+DADDR=26 01 1A F1**(%%)  :  Set Device Address to 26 01 1A F1
++(% style="background-color:#dcdcdc" %)**ATZ**        (%%)                              :  Reset MCU
  )))
@@ -2083,7 +2083,7 @@
  == 5.5 Can i use point to point communication for LT-22222-L? ==
--Yes, please refer [[Point to Point Communication>>doc:Main. Point to Point Communication of LT-22222-L.WebHome]]
++Yes, please refer [[Point to Point Communication>>doc:Main. Point to Point Communication of LT-22222-L.WebHome]]  ，this is [[firmware>>https://www.dropbox.com/sh/g99v0fxcltn9r1y/AADKXQ2v5ZT-S3sxdmbvE7UAa/LT-22222-L/image?dl=0&subfolder_nav_tracking=1]].
@@ -2102,10 +2102,13 @@
  After restart, the status before power failure will be read from flash.
++
  == 5.7 Can i set up LT-22222-L as a NC(Normal Close) Relay? ==
++
  LT-22222-L built-in relay is NO (Normal Open). User can use an external relay to achieve Normal Close purpose. Diagram as below:
++
  [[image:image-20221006170630-1.png||height="610" width="945"]]
@@ -2172,8 +2172,6 @@
  * (% style="color:red" %)**IN865**(%%):   LT with frequency bands IN865
  * (% style="color:red" %)**CN779**(%%):  LT with frequency bands CN779
--
--
  = 8. Packing Info =
@@ -2191,8 +2191,6 @@
  * Package Size / pcs : 14.5 x 8 x 5 cm
  * Weight / pcs : 170g
--
--
  = 9. Support =

Changes for page LT-22222-L -- LoRa I/O Controller User Manual

Summary

Details

Applications

Navigation