Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -67,21 +67,29 @@
67	67
68	68
69	69
70		-
71		-
72	72	= 1. Introduction =
73	73
74	74	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
75	75
	74	+(((
76	76	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	76	+)))
77	77
	78	+(((
78	78	LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	80	+)))
79	79
	82	+(((
80	80	The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	84	+)))
81	81
	86	+(((
82	82	LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	88	+)))
83	83
	90	+(((
84	84	Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	92	+)))
85	85
86	86
87	87	[[image:1654592435432-887.png]]
...	...	@@ -105,8 +105,6 @@
105	105	* 8500mAh Battery for long term use
106	106
107	107
108		-
109		-
110	110	== 1.3 Probe Specification ==
111	111
112	112
...	...	@@ -128,15 +128,11 @@
128	128	* Length: 3.5 meters
129	129
130	130
131		-
132		-
133	133	== 1.4 ​Applications ==
134	134
135	135	* Smart Agriculture
136	136
137	137
138		-
139		-
140	140	== 1.5 Pin mapping and power on ==
141	141
142	142	[[image:1654592472094-134.png]]
...	...	@@ -215,7 +215,9 @@
215	215	[[image:image-20220607170442-2.png]]
216	216
217	217
	220	+(((
218	218	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	222	+)))
219	219
220	220	[[image:1654592697690-910.png]]
221	221
...	...	@@ -223,11 +223,17 @@
223	223
224	224	== 2.3 ​Uplink Payload ==
225	225
	230	+(((
226	226	LSPH01 will uplink payload via LoRaWAN with below payload format:
	232	+)))
227	227
	234	+(((
228	228	Uplink payload includes in total 11 bytes.
	236	+)))
229	229
	238	+(((
230	230	Normal uplink payload:
	240	+)))
231	231
232	232	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
233	233	|(((
...	...	@@ -311,18 +311,23 @@
311	311
312	312	=== 2.3.6 Message Type ===
313	313
	324	+(((
314	314	For a normal uplink payload, the message type is always 0x01.
	326	+)))
315	315
	328	+(((
316	316	Valid Message Type:
	330	+)))
317	317
318	318
319	319	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
320		-|**Message Type Code**|**Description**|**Payload**
	334	+|=**Message Type Code**|=**Description**|=**Payload**
321	321	|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
322	322	|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
323	323	|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
324	324
325	325
	340	+
326	326	=== 2.3.7 Decode payload in The Things Network ===
327	327
328	328	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -348,12 +348,21 @@
348	348
349	349	== 2.5 ​Show Data in DataCake IoT Server ==
350	350
	366	+(((
351	351	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	368	+)))
352	352
	370	+(((
	371	+
	372	+)))
353	353
	374	+(((
354	354	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	376	+)))
355	355
	378	+(((
356	356	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	380	+)))
357	357
358	358
359	359	[[image:1654592790040-760.png]]
...	...	@@ -376,9 +376,13 @@
376	376	[[image:1654592856403-259.png]]
377	377
378	378
	403	+(((
379	379	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	405	+)))
380	380
	407	+(((
381	381	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	409	+)))
382	382
383	383
384	384	[[image:1654592878525-845.png]]
...	...	@@ -401,8 +401,10 @@
401	401	=== 2.6.1 Before measurement ===
402	402
403	403	(((
	432	+(((
404	404	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
405	405	)))
	435	+)))
406	406
407	407
408	408
...	...	@@ -409,24 +409,45 @@
409	409	=== 2.6.2 Measurement ===
410	410
411	411
	442	+(((
412	412	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	444	+)))
413	413
	446	+(((
414	414	[[image:1654592946732-634.png]]
	448	+)))
415	415
	450	+(((
416	416	Choose the proper measuring position. Split the surface soil according to the measured deep.
	452	+)))
417	417
	454	+(((
418	418	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	456	+)))
419	419
	458	+(((
420	420	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	460	+)))
421	421
	462	+(((
422	422	Put soil over the probe after insert. And start to measure.
	464	+)))
423	423
	466	+(((
	467	+
	468	+)))
424	424
	470	+(((
425	425	(% style="color:#4f81bd" %)**Measurement inside soil:**
	472	+)))
426	426
	474	+(((
427	427	Dig a hole with diameter > 20CM.
	476	+)))
428	428
	478	+(((
429	429	Insert the probe inside, method like measure the surface.
	480	+)))
430	430
431	431
432	432
...	...	@@ -456,9 +456,13 @@
456	456
457	457	== 2.7 Calibration ==
458	458
	510	+(((
459	459	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	512	+)))
460	460
	514	+(((
461	461	After stable, user can use below command to calibrate.
	516	+)))
462	462
463	463	[[image:image-20220607171149-4.png]]
464	464
...	...	@@ -465,7 +465,7 @@
465	465
466	466	(% style="color:#037691" %)**Calibration Payload**
467	467
468		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
	523	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
469	469	|(((
470	470	**Size**
471	471
...	...	@@ -494,6 +494,7 @@
494	494	* Reply to non-confirmed packet: 14 00
495	495
496	496
	552	+
497	497	== 2.8 Frequency Plans ==
498	498
499	499	(((
...	...	@@ -503,32 +503,61 @@
503	503
504	504	=== 2.8.1 EU863-870 (EU868) ===
505	505
	562	+(((
506	506	(% style="color:blue" %)**Uplink:**
	564	+)))
507	507
	566	+(((
508	508	868.1 - SF7BW125 to SF12BW125
	568	+)))
509	509
	570	+(((
510	510	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	572	+)))
511	511
	574	+(((
512	512	868.5 - SF7BW125 to SF12BW125
	576	+)))
513	513
	578	+(((
514	514	867.1 - SF7BW125 to SF12BW125
	580	+)))
515	515
	582	+(((
516	516	867.3 - SF7BW125 to SF12BW125
	584	+)))
517	517
	586	+(((
518	518	867.5 - SF7BW125 to SF12BW125
	588	+)))
519	519
	590	+(((
520	520	867.7 - SF7BW125 to SF12BW125
	592	+)))
521	521
	594	+(((
522	522	867.9 - SF7BW125 to SF12BW125
	596	+)))
523	523
	598	+(((
524	524	868.8 - FSK
	600	+)))
525	525
	602	+(((
	603	+
	604	+)))
526	526
	606	+(((
527	527	(% style="color:blue" %)**Downlink:**
	608	+)))
528	528
	610	+(((
529	529	Uplink channels 1-9 (RX1)
	612	+)))
530	530
	614	+(((
531	531	869.525 - SF9BW125 (RX2 downlink only)
	616	+)))
532	532
533	533
534	534
...	...	@@ -551,6 +551,7 @@
551	551
552	552
553	553
	639	+
554	554	=== 2.8.3 CN470-510 (CN470) ===
555	555
556	556	Used in China, Default use CHE=1
...	...	@@ -618,56 +618,111 @@
618	618	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
619	619
620	620
621		-
622	622	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
623	623
	709	+(((
624	624	(% style="color:blue" %)**Default Uplink channel:**
	711	+)))
625	625
	713	+(((
626	626	923.2 - SF7BW125 to SF10BW125
	715	+)))
627	627
	717	+(((
628	628	923.4 - SF7BW125 to SF10BW125
	719	+)))
629	629
	721	+(((
	722	+
	723	+)))
630	630
	725	+(((
631	631	(% style="color:blue" %)**Additional Uplink Channel**:
	727	+)))
632	632
	729	+(((
633	633	(OTAA mode, channel added by JoinAccept message)
	731	+)))
634	634
	733	+(((
	734	+
	735	+)))
635	635
	737	+(((
636	636	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	739	+)))
637	637
	741	+(((
638	638	922.2 - SF7BW125 to SF10BW125
	743	+)))
639	639
	745	+(((
640	640	922.4 - SF7BW125 to SF10BW125
	747	+)))
641	641
	749	+(((
642	642	922.6 - SF7BW125 to SF10BW125
	751	+)))
643	643
	753	+(((
644	644	922.8 - SF7BW125 to SF10BW125
	755	+)))
645	645
	757	+(((
646	646	923.0 - SF7BW125 to SF10BW125
	759	+)))
647	647
	761	+(((
648	648	922.0 - SF7BW125 to SF10BW125
	763	+)))
649	649
	765	+(((
	766	+
	767	+)))
650	650
	769	+(((
651	651	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	771	+)))
652	652
	773	+(((
653	653	923.6 - SF7BW125 to SF10BW125
	775	+)))
654	654
	777	+(((
655	655	923.8 - SF7BW125 to SF10BW125
	779	+)))
656	656
	781	+(((
657	657	924.0 - SF7BW125 to SF10BW125
	783	+)))
658	658
	785	+(((
659	659	924.2 - SF7BW125 to SF10BW125
	787	+)))
660	660
	789	+(((
661	661	924.4 - SF7BW125 to SF10BW125
	791	+)))
662	662
	793	+(((
663	663	924.6 - SF7BW125 to SF10BW125
	795	+)))
664	664
	797	+(((
	798	+
	799	+)))
665	665
	801	+(((
666	666	(% style="color:blue" %)**Downlink:**
	803	+)))
667	667
	805	+(((
668	668	Uplink channels 1-8 (RX1)
	807	+)))
669	669
	809	+(((
670	670	923.2 - SF10BW125 (RX2)
	811	+)))
671	671
672	672
673	673
...	...	@@ -734,7 +734,6 @@
734	734	* Blink once when device transmit a packet.
735	735
736	736
737		-
738	738	== 2.10 ​Firmware Change Log ==
739	739
740	740
...	...	@@ -792,6 +792,7 @@
792	792	* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
793	793
794	794
	935	+
795	795	== 3.2 Set Interrupt Mode ==
796	796
797	797	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -810,8 +810,6 @@
810	810	* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
811	811	* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
812	812
813		-
814		-
815	815	== 3.3 Calibrate Sensor ==
816	816
817	817	Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
...	...	@@ -1051,8 +1051,6 @@
1051	1051	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1052	1052	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1053	1053
1054		-
1055		-
1056	1056	= 9. ​Packing Info =
1057	1057
1058	1058
...	...	@@ -1067,8 +1067,6 @@
1067	1067	* Package Size / pcs : cm
1068	1068	* Weight / pcs : g
1069	1069
1070		-
1071		-
1072	1072	= 10. ​Support =
1073	1073
1074	1074	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.