Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -67,22 +67,29 @@
67	67
68	68
69	69
70		-
71		-
72		-
73	73	= 1. Introduction =
74	74
75	75	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
76	76
	74	+(((
77	77	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	76	+)))
78	78
	78	+(((
79	79	LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	80	+)))
80	80
	82	+(((
81	81	The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	84	+)))
82	82
	86	+(((
83	83	LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	88	+)))
84	84
	90	+(((
85	85	Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	92	+)))
86	86
87	87
88	88	[[image:1654592435432-887.png]]
...	...	@@ -210,7 +210,9 @@
210	210	[[image:image-20220607170442-2.png]]
211	211
212	212
	220	+(((
213	213	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	222	+)))
214	214
215	215	[[image:1654592697690-910.png]]
216	216
...	...	@@ -218,11 +218,17 @@
218	218
219	219	== 2.3 ​Uplink Payload ==
220	220
	230	+(((
221	221	LSPH01 will uplink payload via LoRaWAN with below payload format:
	232	+)))
222	222
	234	+(((
223	223	Uplink payload includes in total 11 bytes.
	236	+)))
224	224
	238	+(((
225	225	Normal uplink payload:
	240	+)))
226	226
227	227	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
228	228	|(((
...	...	@@ -306,13 +306,17 @@
306	306
307	307	=== 2.3.6 Message Type ===
308	308
	324	+(((
309	309	For a normal uplink payload, the message type is always 0x01.
	326	+)))
310	310
	328	+(((
311	311	Valid Message Type:
	330	+)))
312	312
313	313
314	314	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
315		-|**Message Type Code**|**Description**|**Payload**
	334	+|=**Message Type Code**|=**Description**|=**Payload**
316	316	|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
317	317	|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
318	318	|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
...	...	@@ -344,12 +344,21 @@
344	344
345	345	== 2.5 ​Show Data in DataCake IoT Server ==
346	346
	366	+(((
347	347	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	368	+)))
348	348
	370	+(((
	371	+
	372	+)))
349	349
	374	+(((
350	350	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	376	+)))
351	351
	378	+(((
352	352	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	380	+)))
353	353
354	354
355	355	[[image:1654592790040-760.png]]
...	...	@@ -372,9 +372,13 @@
372	372	[[image:1654592856403-259.png]]
373	373
374	374
	403	+(((
375	375	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	405	+)))
376	376
	407	+(((
377	377	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	409	+)))
378	378
379	379
380	380	[[image:1654592878525-845.png]]
...	...	@@ -397,8 +397,10 @@
397	397	=== 2.6.1 Before measurement ===
398	398
399	399	(((
	432	+(((
400	400	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
401	401	)))
	435	+)))
402	402
403	403
404	404
...	...	@@ -405,24 +405,45 @@
405	405	=== 2.6.2 Measurement ===
406	406
407	407
	442	+(((
408	408	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	444	+)))
409	409
	446	+(((
410	410	[[image:1654592946732-634.png]]
	448	+)))
411	411
	450	+(((
412	412	Choose the proper measuring position. Split the surface soil according to the measured deep.
	452	+)))
413	413
	454	+(((
414	414	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	456	+)))
415	415
	458	+(((
416	416	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	460	+)))
417	417
	462	+(((
418	418	Put soil over the probe after insert. And start to measure.
	464	+)))
419	419
	466	+(((
	467	+
	468	+)))
420	420
	470	+(((
421	421	(% style="color:#4f81bd" %)**Measurement inside soil:**
	472	+)))
422	422
	474	+(((
423	423	Dig a hole with diameter > 20CM.
	476	+)))
424	424
	478	+(((
425	425	Insert the probe inside, method like measure the surface.
	480	+)))
426	426
427	427
428	428
...	...	@@ -452,9 +452,13 @@
452	452
453	453	== 2.7 Calibration ==
454	454
	510	+(((
455	455	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	512	+)))
456	456
	514	+(((
457	457	After stable, user can use below command to calibrate.
	516	+)))
458	458
459	459	[[image:image-20220607171149-4.png]]
460	460
...	...	@@ -461,7 +461,7 @@
461	461
462	462	(% style="color:#037691" %)**Calibration Payload**
463	463
464		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
	523	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
465	465	|(((
466	466	**Size**
467	467
...	...	@@ -481,7 +481,6 @@
481	481	Always 0x03
482	482	)))
483	483
484		-
485	485	User can also send 0x14 downlink command to poll the current calibration payload.
486	486
487	487	[[image:image-20220607171416-7.jpeg]]
...	...	@@ -501,32 +501,61 @@
501	501
502	502	=== 2.8.1 EU863-870 (EU868) ===
503	503
	562	+(((
504	504	(% style="color:blue" %)**Uplink:**
	564	+)))
505	505
	566	+(((
506	506	868.1 - SF7BW125 to SF12BW125
	568	+)))
507	507
	570	+(((
508	508	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	572	+)))
509	509
	574	+(((
510	510	868.5 - SF7BW125 to SF12BW125
	576	+)))
511	511
	578	+(((
512	512	867.1 - SF7BW125 to SF12BW125
	580	+)))
513	513
	582	+(((
514	514	867.3 - SF7BW125 to SF12BW125
	584	+)))
515	515
	586	+(((
516	516	867.5 - SF7BW125 to SF12BW125
	588	+)))
517	517
	590	+(((
518	518	867.7 - SF7BW125 to SF12BW125
	592	+)))
519	519
	594	+(((
520	520	867.9 - SF7BW125 to SF12BW125
	596	+)))
521	521
	598	+(((
522	522	868.8 - FSK
	600	+)))
523	523
	602	+(((
	603	+
	604	+)))
524	524
	606	+(((
525	525	(% style="color:blue" %)**Downlink:**
	608	+)))
526	526
	610	+(((
527	527	Uplink channels 1-9 (RX1)
	612	+)))
528	528
	614	+(((
529	529	869.525 - SF9BW125 (RX2 downlink only)
	616	+)))
530	530
531	531
532	532
...	...	@@ -552,46 +552,89 @@
552	552
553	553	=== 2.8.3 CN470-510 (CN470) ===
554	554
	642	+(((
555	555	Used in China, Default use CHE=1
	644	+)))
556	556
	646	+(((
557	557	(% style="color:blue" %)**Uplink:**
	648	+)))
558	558
	650	+(((
559	559	486.3 - SF7BW125 to SF12BW125
	652	+)))
560	560
	654	+(((
561	561	486.5 - SF7BW125 to SF12BW125
	656	+)))
562	562
	658	+(((
563	563	486.7 - SF7BW125 to SF12BW125
	660	+)))
564	564
	662	+(((
565	565	486.9 - SF7BW125 to SF12BW125
	664	+)))
566	566
	666	+(((
567	567	487.1 - SF7BW125 to SF12BW125
	668	+)))
568	568
	670	+(((
569	569	487.3 - SF7BW125 to SF12BW125
	672	+)))
570	570
	674	+(((
571	571	487.5 - SF7BW125 to SF12BW125
	676	+)))
572	572
	678	+(((
573	573	487.7 - SF7BW125 to SF12BW125
	680	+)))
574	574
	682	+(((
	683	+
	684	+)))
575	575
	686	+(((
576	576	(% style="color:blue" %)**Downlink:**
	688	+)))
577	577
	690	+(((
578	578	506.7 - SF7BW125 to SF12BW125
	692	+)))
579	579
	694	+(((
580	580	506.9 - SF7BW125 to SF12BW125
	696	+)))
581	581
	698	+(((
582	582	507.1 - SF7BW125 to SF12BW125
	700	+)))
583	583
	702	+(((
584	584	507.3 - SF7BW125 to SF12BW125
	704	+)))
585	585
	706	+(((
586	586	507.5 - SF7BW125 to SF12BW125
	708	+)))
587	587
	710	+(((
588	588	507.7 - SF7BW125 to SF12BW125
	712	+)))
589	589
	714	+(((
590	590	507.9 - SF7BW125 to SF12BW125
	716	+)))
591	591
	718	+(((
592	592	508.1 - SF7BW125 to SF12BW125
	720	+)))
593	593
	722	+(((
594	594	505.3 - SF12BW125 (RX2 downlink only)
	724	+)))
595	595
596	596
597	597
...	...	@@ -617,112 +617,219 @@
617	617	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618	618
619	619
620		-
621		-
622	622	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
623	623
	752	+(((
624	624	(% style="color:blue" %)**Default Uplink channel:**
	754	+)))
625	625
	756	+(((
626	626	923.2 - SF7BW125 to SF10BW125
	758	+)))
627	627
	760	+(((
628	628	923.4 - SF7BW125 to SF10BW125
	762	+)))
629	629
	764	+(((
	765	+
	766	+)))
630	630
	768	+(((
631	631	(% style="color:blue" %)**Additional Uplink Channel**:
	770	+)))
632	632
	772	+(((
633	633	(OTAA mode, channel added by JoinAccept message)
	774	+)))
634	634
	776	+(((
	777	+
	778	+)))
635	635
	780	+(((
636	636	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	782	+)))
637	637
	784	+(((
638	638	922.2 - SF7BW125 to SF10BW125
	786	+)))
639	639
	788	+(((
640	640	922.4 - SF7BW125 to SF10BW125
	790	+)))
641	641
	792	+(((
642	642	922.6 - SF7BW125 to SF10BW125
	794	+)))
643	643
	796	+(((
644	644	922.8 - SF7BW125 to SF10BW125
	798	+)))
645	645
	800	+(((
646	646	923.0 - SF7BW125 to SF10BW125
	802	+)))
647	647
	804	+(((
648	648	922.0 - SF7BW125 to SF10BW125
	806	+)))
649	649
	808	+(((
	809	+
	810	+)))
650	650
	812	+(((
651	651	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	814	+)))
652	652
	816	+(((
653	653	923.6 - SF7BW125 to SF10BW125
	818	+)))
654	654
	820	+(((
655	655	923.8 - SF7BW125 to SF10BW125
	822	+)))
656	656
	824	+(((
657	657	924.0 - SF7BW125 to SF10BW125
	826	+)))
658	658
	828	+(((
659	659	924.2 - SF7BW125 to SF10BW125
	830	+)))
660	660
	832	+(((
661	661	924.4 - SF7BW125 to SF10BW125
	834	+)))
662	662
	836	+(((
663	663	924.6 - SF7BW125 to SF10BW125
	838	+)))
664	664
	840	+(((
	841	+
	842	+)))
665	665
	844	+(((
666	666	(% style="color:blue" %)**Downlink:**
	846	+)))
667	667
	848	+(((
668	668	Uplink channels 1-8 (RX1)
	850	+)))
669	669
	852	+(((
670	670	923.2 - SF10BW125 (RX2)
	854	+)))
671	671
672	672
673	673
674	674	=== 2.8.6 KR920-923 (KR920) ===
675	675
	860	+(((
676	676	(% style="color:blue" %)**Default channel:**
	862	+)))
677	677
	864	+(((
678	678	922.1 - SF7BW125 to SF12BW125
	866	+)))
679	679
	868	+(((
680	680	922.3 - SF7BW125 to SF12BW125
	870	+)))
681	681
	872	+(((
682	682	922.5 - SF7BW125 to SF12BW125
	874	+)))
683	683
	876	+(((
	877	+
	878	+)))
684	684
	880	+(((
685	685	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	882	+)))
686	686
	884	+(((
687	687	922.1 - SF7BW125 to SF12BW125
	886	+)))
688	688
	888	+(((
689	689	922.3 - SF7BW125 to SF12BW125
	890	+)))
690	690
	892	+(((
691	691	922.5 - SF7BW125 to SF12BW125
	894	+)))
692	692
	896	+(((
693	693	922.7 - SF7BW125 to SF12BW125
	898	+)))
694	694
	900	+(((
695	695	922.9 - SF7BW125 to SF12BW125
	902	+)))
696	696
	904	+(((
697	697	923.1 - SF7BW125 to SF12BW125
	906	+)))
698	698
	908	+(((
699	699	923.3 - SF7BW125 to SF12BW125
	910	+)))
700	700
	912	+(((
	913	+
	914	+)))
701	701
	916	+(((
702	702	(% style="color:blue" %)**Downlink:**
	918	+)))
703	703
	920	+(((
704	704	Uplink channels 1-7(RX1)
	922	+)))
705	705
	924	+(((
706	706	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	926	+)))
707	707
708	708
709	709
710	710	=== 2.8.7 IN865-867 (IN865) ===
711	711
	932	+(((
712	712	(% style="color:blue" %)**Uplink:**
	934	+)))
713	713
	936	+(((
714	714	865.0625 - SF7BW125 to SF12BW125
	938	+)))
715	715
	940	+(((
716	716	865.4025 - SF7BW125 to SF12BW125
	942	+)))
717	717
	944	+(((
718	718	865.9850 - SF7BW125 to SF12BW125
	946	+)))
719	719
	948	+(((
	949	+
	950	+)))
720	720
	952	+(((
721	721	(% style="color:blue" %)**Downlink:**
	954	+)))
722	722
	956	+(((
723	723	Uplink channels 1-3 (RX1)
	958	+)))
724	724
	960	+(((
725	725	866.550 - SF10BW125 (RX2)
	962	+)))
726	726
727	727
728	728
...	...	@@ -734,8 +734,6 @@
734	734	* Blink once when device transmit a packet.
735	735
736	736
737		-
738		-
739	739	== 2.10 ​Firmware Change Log ==
740	740
741	741
...	...	@@ -812,9 +812,6 @@
812	812	* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
813	813	* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
814	814
815		-
816		-
817		-
818	818	== 3.3 Calibrate Sensor ==
819	819
820	820	Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
...	...	@@ -832,7 +832,6 @@
832	832	* Reply to the confirmation package: 26 01
833	833	* Reply to non-confirmed packet: 26 00
834	834
835		-
836	836	Device will send an uplink after got this downlink command. With below payload:
837	837
838	838	Configures info payload:
...	...	@@ -1055,9 +1055,6 @@
1055	1055	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1056	1056	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1057	1057
1058		-
1059		-
1060		-
1061	1061	= 9. ​Packing Info =
1062	1062
1063	1063
...	...	@@ -1072,9 +1072,6 @@
1072	1072	* Package Size / pcs : cm
1073	1073	* Weight / pcs : g
1074	1074
1075		-
1076		-
1077		-
1078	1078	= 10. ​Support =
1079	1079
1080	1080	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.