Changes for page LDDS45 - LoRaWAN Distance Detection Sensor User Manual

Last modified by Xiaoling on 2025/04/27 13:54

From 24.2 to 24.3 From 37.1 to 38.1

From version 24.3

edited by Xiaoling
on 2022/06/07 14:46

Change comment: There is no comment for this version

To version 37.1

edited by Xiaoling
on 2022/06/07 16:59

Change comment: Uploaded new attachment "1654592399090-860.png", version {1}

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 11 added, 0 removed)

Details

Page properties

Content

@@ -1,5 +1,5 @@
  (% style="text-align:center" %)
--[[image:1654574317295-380.png||height="621" width="576"]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654574317295-380.png?width=576&height=621&rev=1.1||alt="1654574317295-380.png" height="621" width="576"]]
@@ -7,7 +7,60 @@
  **Contents:**
--{{toc/}}
++* [[1. Introduction>>path:#H1.Introduction]]
++** [[1.1 What is LoRaWAN Soil pH Sensor>>path:#H1.1200BWhatisLoRaWANSoilpHSensor]]
++** [[1.2 Features>>path:#H200B1.2Features]]
++** [[1.3 Probe Specification>>path:#H1.3ProbeSpecification]]
++** [[1.4 Applications>>path:#H1.4200BApplications]]
++** [[1.5 Pin mapping and power on>>path:#H1.5Pinmappingandpoweron]]
++* [[2. Configure LSPH01 to connect to LoRaWAN network>>path:#H2.ConfigureLSPH01toconnecttoLoRaWANnetwork]]
++** [[2.1 How it works>>path:#H2.1Howitworks]]
++** [[2.2 Quick guide to connect to LoRaWAN server (OTAA)>>path:#H2.2200BQuickguidetoconnecttoLoRaWANserver28OTAA29]]
++** [[2.3 Uplink Payload>>path:#H2.3200BUplinkPayload]]
++*** [[2.3.1 Battery Info>>path:#H2.3.1BatteryInfo]]
++*** [[2.3.2 DS18B20 Temperature sensor>>path:#H2.3.2DS18B20Temperaturesensor]]
++*** [[2.3.3 Soil pH>>path:#H2.3.3SoilpH]]
++*** [[2.3.4 Soil Temperature>>path:#H2.3.4SoilTemperature]]
++*** [[2.3.5 Interrupt Pin>>path:#H2.3.5InterruptPin]]
++*** [[2.3.6 Message Type>>path:#H2.3.6MessageType]]
++*** [[2.3.7 Decode payload in The Things Network>>path:#H2.3.7DecodepayloadinTheThingsNetwork]]
++** [[2.4 Uplink Interval>>path:#H2.4UplinkInterval]]
++** [[2.5 Show Data in DataCake IoT Server>>path:#H2.5200BShowDatainDataCakeIoTServer]]
++** [[2.6 Installation and Maintain>>path:#H2.6InstallationandMaintain]]
++*** [[2.6.1 Before measurement>>path:#H2.6.1Beforemeasurement]]
++*** [[2.6.2 Measurement>>path:#H2.6.2Measurement]]
++*** [[2.6.3 Maintain Probe>>path:#H2.6.3MaintainProbe]]
++** [[2.7 Calibration>>path:#H2.7Calibration]]
++** [[2.8 Frequency Plans>>path:#H2.8FrequencyPlans]]
++*** [[2.8.1 EU863-870 (EU868)>>path:#H2.8.1EU863-87028EU86829]]
++*** [[2.8.2 US902-928(US915)>>path:#H2.8.2US902-92828US91529]]
++*** [[2.8.3 CN470-510 (CN470)>>path:#H2.8.3CN470-51028CN47029]]
++*** [[2.8.4 AU915-928(AU915)>>path:#H2.8.4AU915-92828AU91529]]
++*** [[2.8.5 AS920-923 & AS923-925 (AS923)>>path:#H2.8.5AS920-92326AS923-92528AS92329]]
++*** [[2.8.6 KR920-923 (KR920)>>path:#H2.8.6KR920-92328KR92029]]
++*** [[2.8.7 IN865-867 (IN865)>>path:#H2.8.7IN865-86728IN86529]]
++** [[2.9 LED Indicator>>path:#H2.9LEDIndicator]]
++** [[2.10 Firmware Change Log>>path:#H2.10200BFirmwareChangeLog]]
++* [[3. Configure LSPH01 via AT Command or LoRaWAN Downlink>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]]
++** [[3.1 Set Transmit Interval Time>>path:#H3.1SetTransmitIntervalTime]]
++** [[3.2 Set Interrupt Mode>>path:#H3.2SetInterruptMode]]
++** [[3.3 Calibrate Sensor>>path:#H3.3CalibrateSensor]]
++** [[3.4 Get Firmware Version Info>>path:#H3.4GetFirmwareVersionInfo]]
++* [[4. Battery & How to replace>>path:#H4.Battery26Howtoreplace]]
++** [[4.1 Battery Type>>path:#H4.1BatteryType]]
++** [[4.2 Replace Battery>>path:#H4.2ReplaceBattery]]
++** [[4.3 Power Consumption Analyze>>path:#H4.3PowerConsumptionAnalyze]]
++*** [[4.3.1 Battery Note>>path:#H4.3.1200BBatteryNote]]
++*** [[4.3.2 Replace the battery>>path:#H200B4.3.2Replacethebattery]]
++* [[5. Use AT Command>>path:#H5.UseATCommand]]
++** [[5.1 Access AT Commands>>path:#H5.1AccessATCommands]]
++* [[6. FAQ>>path:#H6.FAQ]]
++** [[6.1 How to change the LoRa Frequency Bands/Region>>path:#H6.1HowtochangetheLoRaFrequencyBands2FRegion]]
++* [[7. Trouble Shooting>>path:#H7.TroubleShooting]]
++** [[7.1 AT Commands input doesn’t work>>path:#H7.1ATCommandsinputdoesn2019twork]]
++* [[8. Order Info>>path:#H8.OrderInfo]]
++* [[9. Packing Info>>path:#H9.200BPackingInfo]]
++* [[10. Support>>path:#H10.A0200BSupport]]
@@ -19,7 +19,6 @@
--
  = 1. Introduction =
  == 1.1 What is LoRaWAN Soil pH Sensor ==
@@ -35,7 +35,7 @@
  Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
--[[image:1654580186518-415.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654580186518-415.png?rev=1.1||alt="1654580186518-415.png"]]
@@ -55,6 +55,8 @@
  * IP68 rate for the Sensor Probe
  * 8500mAh Battery for long term use
++
++
  == 1.3 Probe Specification ==
@@ -75,13 +75,17 @@
  * IP68 Protection
  * Length: 3.5 meters
++
++
  == 1.4 Applications ==
  * Smart Agriculture
++
++
  == 1.5 Pin mapping and power on ==
--[[image:1654580482666-473.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654580482666-473.png?rev=1.1||alt="1654580482666-473.png"]]
@@ -94,7 +94,7 @@
  )))
  (((
--In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.200BUseATCommand"]]to set the keys in the LSPH01.
++In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
  )))
@@ -121,7 +121,7 @@
  )))
--[[image:image-20220607135531-1.jpeg]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607135531-1.jpeg?rev=1.1||alt="image-20220607135531-1.jpeg"]]
  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
@@ -129,25 +129,25 @@
  **Register the device**
--[[image:1654581442672-605.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654581442672-605.png?rev=1.1||alt="1654581442672-605.png"]]
  **Add APP EUI and DEV EUI**
--[[image:1654581465717-368.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654581465717-368.png?rev=1.1||alt="1654581465717-368.png"]]
  **Add APP EUI in the application**
--[[image:1654581493871-516.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654581493871-516.png?rev=1.1||alt="1654581493871-516.png"]]
  **Add APP KEY**
--[[image:1654581517630-991.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654581517630-991.png?rev=1.1||alt="1654581517630-991.png"]]
  (% style="color:blue" %)**Step 2**(%%): Power on LSPH01
@@ -155,12 +155,12 @@
  Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).
--[[image:image-20220607135918-2.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607135918-2.png?rev=1.1||alt="image-20220607135918-2.png"]]
  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
--[[image:1654581590132-631.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654581590132-631.png?rev=1.1||alt="1654581590132-631.png"]]
@@ -178,17 +178,17 @@
  **(bytes)**
  )))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
--|**Value**|[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(((
--[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
++|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
++[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
--[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
--)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
--[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
++[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
++)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
++[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
  )))|Reserve|(((
--[[Message Type>>||anchor="H2.3.6MessageType"]]
++[[Message Type>>path:#H2.3.6MessageType]]
  )))
--[[image:1654581735133-458.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654581735133-458.png?rev=1.1||alt="1654581735133-458.png"]]
@@ -241,7 +241,7 @@
  === 2.3.5 Interrupt Pin ===
--This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
++This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
  **Example:**
@@ -261,9 +261,9 @@
  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
  |**Message Type Code**|**Description**|**Payload**
--|0x01|Normal Uplink|[[Normal Uplink Payload>>||anchor="H2.3Uplink Payload"]]
--|0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
--|0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]
++|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
++|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
++|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
  === 2.3.7 Decode payload in The Things Network ===
@@ -270,7 +270,7 @@
  While using TTN network, you can add the payload format to decode the payload.
--[[image:1654582541848-906.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654582541848-906.png?rev=1.1||alt="1654582541848-906.png"]]
  (((
  The payload decoder function for TTN is here:
@@ -284,7 +284,7 @@
  == 2.4 Uplink Interval ==
--The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
++The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
@@ -298,10 +298,10 @@
  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
--[[image:1654583683416-869.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583683416-869.png?rev=1.1||alt="1654583683416-869.png"]]
--[[image:1654583694084-878.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583694084-878.png?rev=1.1||alt="1654583694084-878.png"]]
  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
@@ -308,14 +308,14 @@
  (% style="color:blue" %)**Step 4**(%%)**: Create LSPH01 product.**
--[[image:1654583711590-413.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583711590-413.png?rev=1.1||alt="1654583711590-413.png"]]
--[[image:1654583732798-193.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583732798-193.png?rev=1.1||alt="1654583732798-193.png"]]
--[[image:1654583749683-259.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583749683-259.png?rev=1.1||alt="1654583749683-259.png"]]
  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
@@ -323,23 +323,21 @@
  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
--[[image:1654583770974-935.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583770974-935.png?rev=1.1||alt="1654583770974-935.png"]]
--[[image:1654583781517-146.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583781517-146.png?rev=1.1||alt="1654583781517-146.png"]]
--[[image:1654583791351-557.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583791351-557.png?rev=1.1||alt="1654583791351-557.png"]]
  After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
--[[image:1654583805491-713.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583805491-713.png?rev=1.1||alt="1654583805491-713.png"]]
--
--
  == 2.6 Installation and Maintain ==
  === 2.6.1 Before measurement ===
@@ -355,7 +355,7 @@
  (% style="color:#4f81bd" %)**Measurement the soil surface:**
--[[image:1654584128046-287.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654584128046-287.png?rev=1.1||alt="1654584128046-287.png"]]
  Choose the proper measuring position. Split the surface soil according to the measured deep.
@@ -393,50 +393,23 @@
  )))
 . (((
  The probe is IP68 can be put in water.
--)))
++
++)))
  == 2.7 Calibration ==
  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
++After stable, user can use below command to calibrate.
--**After stable, user can use below command to calibrate.**
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607144936-3.png?rev=1.1||alt="image-20220607144936-3.png"]]
--|**pH buffer solution**|**AT Command to calibrate**|**Downlink Command**|**Read Cal Value**
--|**4.00**|**AT+PHCAL=4**|(((
--**0x13 04**
++(% style="color:#037691" %)**Calibration Payload**
--**Reply with Calibrate payload**
--)))|(((
--**AT+PHCAL=?**
--
--**Example 41,61,91**
--)))
--|**6.86**|**AT+PHCAL=6**|(((
--**0x13 06**
--
--**Reply with Calibrate payload**
--)))|**AT+PHCAL=?**
--|**9.18**|**AT+PHCAL=9**|(((
--**0x13 09**
--
--**Reply with Calibrate payload**
--)))|**AT+PHCAL=?**
--|**Factory Default**|**AT+PHCAL=15**|(((
--**0x13 15**
--
--**Reply with Calibrate payload**
--)))|(((
--**AT+PHCAL=?**
--
--**Example 151**
--)))
--
--Calibration Payload
--
++(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
  |(((
  **Size**
@@ -451,33 +451,29 @@
  Calibrate value
  )))|Reserve|(((
--[[Message>>path:#Message_Type]]
++[[Message Type>>path:#H2.3.6MessageType]]
--[[Type>>path:#Message_Type]]
--
  Always 0x03
  )))
  User can also send 0x14 downlink command to poll the current calibration payload.
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607145603-4.png?rev=1.1||alt="image-20220607145603-4.png"]]
--|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**
--|Get Calibration Version Info|Any|14|2
--
  * Reply to the confirmation package: 14 01
  * Reply to non-confirmed packet: 14 00
--1.
--11. Frequency Plans
++== 2.8 Frequency Plans ==
++(((
  The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
++)))
--1.
--11.
--111. EU863-870 (EU868)
--Uplink:
++=== 2.8.1 EU863-870 (EU868) ===
++(% style="color:blue" %)**Uplink:**
++
 .1 - SF7BW125 to SF12BW125
 .3 - SF7BW125 to SF12BW125 and SF7BW250
@@ -497,7 +497,7 @@
 .8 - FSK
--Downlink:
++(% style="color:blue" %)**Downlink:**
  Uplink channels 1-9 (RX1)
@@ -504,28 +504,29 @@
 .525 - SF9BW125 (RX2 downlink only)
--1.
--11.
--111. US902-928(US915)
++=== 2.8.2 US902-928(US915) ===
++
++(((
  Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
++)))
--
++(((
  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
++)))
--
++(((
  After Join success, the end node will switch to the correct sub band by:
++)))
  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
--1.
--11.
--111. CN470-510 (CN470)
++=== 2.8.3 CN470-510 (CN470) ===
  Used in China, Default use CHE=1
--Uplink:
++(% style="color:blue" %)**Uplink:**
 .3 - SF7BW125 to SF12BW125
@@ -544,7 +544,7 @@
 .7 - SF7BW125 to SF12BW125
--Downlink:
++(% style="color:blue" %)**Downlink:**
 .7 - SF7BW125 to SF12BW125
@@ -565,26 +565,31 @@
 .3 - SF12BW125 (RX2 downlink only)
--1.
--11.
--111. AU915-928(AU915)
++=== 2.8.4 AU915-928(AU915) ===
++
++(((
  Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
++)))
--
++(((
  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
++)))
++(((
++
++)))
++(((
  After Join success, the end node will switch to the correct sub band by:
++)))
  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
--1.
--11.
--111. AS920-923 & AS923-925 (AS923)
++=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
--**Default Uplink channel:**
++(% style="color:blue" %)**Default Uplink channel:**
 .2 - SF7BW125 to SF10BW125
@@ -591,12 +591,13 @@
 .4 - SF7BW125 to SF10BW125
--**Additional Uplink Channel**:
++(% style="color:blue" %)**Additional Uplink Channel**:
  (OTAA mode, channel added by JoinAccept message)
--**AS920~~AS923 for Japan, Malaysia, Singapore**:
++(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
++
 .2 - SF7BW125 to SF10BW125
 .4 - SF7BW125 to SF10BW125
@@ -610,7 +610,7 @@
 .0 - SF7BW125 to SF10BW125
--**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
++(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
 .6 - SF7BW125 to SF10BW125
@@ -625,20 +625,18 @@
 .6 - SF7BW125 to SF10BW125
++(% style="color:blue" %)**Downlink:**
--**Downlink:**
--
  Uplink channels 1-8 (RX1)
 .2 - SF10BW125 (RX2)
--1.
--11.
--111. KR920-923 (KR920)
--Default channel:
++=== 2.8.6 KR920-923 (KR920) ===
++(% style="color:blue" %)**Default channel:**
++
 .1 - SF7BW125 to SF12BW125
 .3 - SF7BW125 to SF12BW125
@@ -646,7 +646,7 @@
 .5 - SF7BW125 to SF12BW125
--Uplink: (OTAA mode, channel added by JoinAccept message)
++(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
 .1 - SF7BW125 to SF12BW125
@@ -663,7 +663,7 @@
 .3 - SF7BW125 to SF12BW125
--Downlink:
++(% style="color:blue" %)**Downlink:**
  Uplink channels 1-7(RX1)
@@ -670,12 +670,11 @@
 .9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
--1.
--11.
--111. IN865-867 (IN865)
--Uplink:
++=== 2.8.7 IN865-867 (IN865) ===
++(% style="color:blue" %)**Uplink:**
++
 .0625 - SF7BW125 to SF12BW125
 .4025 - SF7BW125 to SF12BW125
@@ -683,7 +683,7 @@
 .9850 - SF7BW125 to SF12BW125
--Downlink:
++(% style="color:blue" %)**Downlink:**
  Uplink channels 1-3 (RX1)
@@ -690,45 +690,36 @@
 .550 - SF10BW125 (RX2)
--1.
--11. LED Indicator
++== 2.9 LED Indicator ==
++
  The LSPH01 has an internal LED which is to show the status of different state.
--
  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
  * Blink once when device transmit a packet.
--1.
--11. Firmware Change Log
++== 2.10 Firmware Change Log ==
++
  **Firmware download link:**
  [[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
--**Firmware Upgrade Method:**
++**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>path:/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/]]
--[[http:~~/~~/wiki.dragino.com/index.pHp?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction>>url:http://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction]]
++= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
--
--
--
--1. Configure LSPH01 via AT Command or LoRaWAN Downlink
--
  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
--* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
--* LoRaWAN Downlink instruction for different platforms:
++* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
++* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
--[[http:~~/~~/wiki.dragino.com/index.pHp?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
--
--
  There are two kinds of commands to configure LSPH01, they are:
--* **General Commands**.
++* (% style="color:#4f81bd" %)** General Commands**.
  These commands are to configure:
@@ -735,25 +735,25 @@
  * General system settings like: uplink interval.
  * LoRaWAN protocol & radio related command.
--They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
++They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
--[[http:~~/~~/wiki.dragino.com/index.pHp?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
++* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
--* **Commands special design for LSPH01**
--
  These commands only valid for LSPH01, as below:
--1.
--11. Set Transmit Interval Time
++== 3.1 Set Transmit Interval Time ==
++
  Feature: Change LoRaWAN End Node Transmit Interval.
--**AT Command: AT+TDC**
++(% style="color:#037691" %)**AT Command: AT+TDC**
--|**Command Example**|**Function**|**Response**
--|AT+TDC=?|Show current transmit Interval|(((
++
++(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
++|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
++|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
  OK
@@ -760,13 +760,13 @@
  the interval is 30000ms = 30s
  )))
--|AT+TDC=60000|Set Transmit Interval|(((
++|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
  OK
  Set transmit interval to 60000ms = 60 seconds
  )))
--**Downlink Command: 0x01**
++(% style="color:#037691" %)**Downlink Command: 0x01**
  Format: Command Code (0x01) followed by 3 bytes time value.
@@ -775,32 +775,17 @@
  * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
--1.
--11. Set Interrupt Mode
++== 3.2 Set Interrupt Mode ==
  Feature, Set Interrupt mode for GPIO_EXIT.
--**AT Command: AT+INTMOD**
++(% style="color:#037691" %)**AT Command: AT+INTMOD**
--|**Command Example**|**Function**|**Response**
--|AT+INTMOD=?|Show current interrupt mode|(((
--0
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607153759-6.png?rev=1.1||alt="image-20220607153759-6.png"]]
--OK
--the mode is 0 = No interruption
--)))
--|AT+INTMOD=2|(((
--Set Transmit Interval
++(% style="color:#037691" %)**Downlink Command: 0x06**
--1. (Disable Interrupt),
--1. (Trigger by rising and falling edge),
--1. (Trigger by falling edge)
--1. (Trigger by rising edge)
--)))|OK
--
--**Downlink Command: 0x06**
--
  Format: Command Code (0x06) followed by 3 bytes.
  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
@@ -808,25 +808,20 @@
  * Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
  * Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
--1.
--11. Calibrate Sensor
++== 3.3 Calibrate Sensor ==
--Detail See [[Calibration Guide>>path:#Calibration]] for the user of 0x13 and 0x14 downlink commands
++Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
--1.
--11. Get Firmware Version Info
++== 3.4 Get Firmware Version Info ==
  Feature: use downlink to get firmware version.
++(% style="color:#037691" %)**Downlink Command: 0x26**
--**Downlink Command: 0x26**
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607154718-7.png?rev=1.1||alt="image-20220607154718-7.png"]]
--
--|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**
--|Get Firmware Version Info|Any|26|2
--
  * Reply to the confirmation package: 26 01
  * Reply to non-confirmed packet: 26 00
@@ -834,11 +834,10 @@
  Configures info payload:
--|(((
--**Size**
--
--**(bytes)**
--)))|**1**|**1**|**1**|**1**|**1**|**5**|**1**
++(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
++|=(((
++**Size(bytes)**
++)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**
  |**Value**|Software Type|(((
  Frequency
@@ -848,10 +848,7 @@
  Version
  )))|Sensor Type|Reserve|(((
--[[Message>>path:#Message_Type]]
--
--[[Type>>path:#Message_Type]]
--
++[[Message Type>>path:#H2.3.6MessageType]]
  Always 0x02
  )))
@@ -905,18 +905,19 @@
++= 4. Battery & How to replace =
++== 4.1 Battery Type ==
--
--1. Battery & How to replace
--11. Battery Type
--
++(((
  LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
++)))
--
++(((
  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
++)))
--[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588469844-778.png?rev=1.1||alt="1654588469844-778.png"]]
  Minimum Working Voltage for the LSPH01:
@@ -924,30 +924,36 @@
  LSPH01:  2.45v ~~ 3.6v
--1.
--11. Replace Battery
++== 4.2 Replace Battery ==
++
++(((
  Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
++)))
++(((
  And make sure the positive and negative pins match.
++)))
--1.
--11. Power Consumption Analyze
++== 4.3 Power Consumption Analyze ==
++(((
  Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
++)))
--
++(((
  Instruction to use as below:
++)))
--Step 1: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
++**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
--Step 2: Open it and choose
++**Step 2**: Open it and choose
  * Product Model
  * Uplink Interval
@@ -955,102 +955,103 @@
  And the Life expectation in difference case will be shown on the right.
--[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588577573-122.png?rev=1.1||alt="1654588577573-122.png"]]
  The battery related documents as below:
--* [[Battery Dimension>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]],
--* [[Lithium-Thionyl Chloride Battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]] datasheet
--* [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
--
--|(((
--JST-XH-2P connector
++* (((
++[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
  )))
++* (((
++[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
++)))
++* (((
++[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
++)))
--[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607155856-8.png?rev=1.1||alt="image-20220607155856-8.png"]]
--1.
--11.
--111. Battery Note
++=== 4.3.1 Battery Note ===
++(((
  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
++)))
--1.
--11.
--111. Replace the battery
++=== 4.3.2 Replace the battery ===
++
  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v.  On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
--
  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
++= 5. Use AT Command =
++== 5.1 Access AT Commands ==
--
--1. Use AT Command
--11. Access AT Commands
--
  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
--[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
++[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589001411-343.png?rev=1.1||alt="1654589001411-343.png"]]
--Connection:
++**Connection:**
--USB TTL GND <~-~-~-~-> GND
++(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
--USB TTL TXD <~-~-~-~-> UART_RXD
++(% style="background-color:yellow" %)** USB TTL TXD  <~-~-~-~-> UART_RXD**
--USB TTL RXD <~-~-~-~-> UART_TXD
++(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
--In the PC, you need to set the serial baud rate to **9600** to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
++In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
-- [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
++ [[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589062541-567.png?rev=1.1||alt="1654589062541-567.png"]]
--Valid AT Command please check [[Configure Device>>path:#Configure_Device]].
++Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
++= 6. FAQ =
--1. FAQ
--11. How to change the LoRa Frequency Bands/Region
++== 6.1 How to change the LoRa Frequency Bands/Region ==
--You can follow the instructions for [[how to upgrade image>>path:#3ygebqi]].
++You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
  When downloading the images, choose the required image file for download.
--1. Trouble Shooting
--11. AT Commands input doesn’t work
++= 7. Trouble Shooting =
--In the case if user can see the console output but can’t type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn’t send **ENTER** while press the send key, user need to add ENTER in their string.
++== 7.1 AT Commands input doesn’t work ==
++In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
--1. Order Info
--Part Number: **LSPH01-XX**
++= 8. Order Info =
--**XX**: The default frequency band
++Part Number: (% style="color:blue" %)**LSPH01-XX**
--* **AS923**: LoRaWAN AS923 band
--* **AU915**: LoRaWAN AU915 band
--* **EU433**: LoRaWAN EU433 band
--* **EU868**: LoRaWAN EU868 band
--* **KR920**: LoRaWAN KR920 band
--* **US915**: LoRaWAN US915 band
--* **IN865**: LoRaWAN IN865 band
--* **CN470**: LoRaWAN CN470 band
--1. Packing Info
++(% style="color:blue" %)**XX**(%%): The default frequency band
++* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
++* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
++* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
++* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
++* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
++* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
++* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
++* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
++
++= 9. Packing Info =
++
++
  **Package Includes**:
  * LSPH01 LoRaWAN Soil Ph Sensor x 1
@@ -1062,11 +1062,10 @@
  * Package Size / pcs : cm
  * Weight / pcs : g
++
  = 10. Support =
  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
--* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
++* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].
--[[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
--

1654588469844-778.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+75.8 KB

Content

1654588577573-122.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+138.2 KB

Content

1654589001411-343.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+546.2 KB

Content

1654589062541-567.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+144.0 KB

Content

1654592399090-860.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+272.0 KB

Content

image-20220607144936-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+23.6 KB

Content

image-20220607145603-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+5.8 KB

Content

image-20220607153237-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.9 KB

Content

image-20220607153759-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.2 KB

Content

image-20220607154718-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+6.0 KB

Content

image-20220607155856-8.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+83.5 KB

Content