Wiki source code of LA66 LoRaWAN Shield User Manual

Version 160.1 by Bei Jinggeng on 2022/09/09 14:59

version	line-number	content
134.2	1
87.2	2
87.13	3	Table of Contents:
	4
1.1	5	{{toc/}}
	6
	7
6.1	8
87.2	9
146.5	10	= 1. LA66 LoRaWAN Shield =
87.2	11
	12
146.5	13	== 1.1 Overview ==
87.2	14
88.2	15
100.2	16	(((
	17	[[image:image-20220715000826-2.png\|\|height="145" width="220"]]
	18	)))
90.1	19
100.2	20	(((
	21
	22	)))
	23
	24	(((
100.4	25	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to Arduino projects.
100.2	26	)))
71.1	27
90.1	28	(((
100.2	29	(((
101.4	30	(% style="color:blue" %)LA66(%%) is a ready-to-use module that includes the (% style="color:blue" %)LoRaWAN v1.0.3 protocol(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
90.1	31	)))
100.2	32	)))
71.1	33
90.1	34	(((
100.2	35	(((
90.1	36	Each LA66 module includes a (% style="color:blue" %)world-unique OTAA key(%%) for LoRaWAN registration.
	37	)))
100.2	38	)))
90.1	39
	40	(((
100.2	41	(((
90.1	42	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)open-source peer-to-peer LoRa Protocol(%%) for the none-LoRaWAN application.
	43	)))
100.2	44	)))
90.1	45
	46	(((
100.2	47	(((
90.1	48	LA66 is equipped with (% style="color:blue" %)TCXO crystal(%%) which ensures the module can achieve stable performance in extreme temperatures.
	49	)))
100.2	50	)))
90.1	51
	52
100.2	53
146.5	54	== 1.2 Features ==
71.1	55
137.6	56
71.1	57	* Arduino Shield base on LA66 LoRaWAN module
146.10	58	* Support LoRaWAN v1.0.3 protocol
71.1	59	* Support peer-to-peer protocol
	60	* TCXO crystal to ensure RF performance on low temperature
	61	* SMA connector
	62	* Available in different frequency LoRaWAN frequency bands.
	63	* World-wide unique OTAA keys.
	64	* AT Command via UART-TTL interface
	65	* Firmware upgradable via UART interface
	66	* Ultra-long RF range
	67
146.5	68	== 1.3 Specification ==
	69
	70
71.1	71	* CPU: 32-bit 48 MHz
	72	* Flash: 256KB
	73	* RAM: 64KB
	74	* Input Power Range: 1.8v ~~ 3.7v
	75	* Power Consumption: < 4uA.
	76	* Frequency Range: 150 MHz ~~ 960 MHz
	77	* Maximum Power +22 dBm constant RF output
	78	* High sensitivity: -148 dBm
	79	* Temperature:
	80	** Storage: -55 ~~ +125℃
	81	** Operating: -40 ~~ +85℃
	82	* Humidity:
	83	** Storage: 5 ~~ 95% (Non-Condensing)
	84	** Operating: 10 ~~ 95% (Non-Condensing)
	85	* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	86	* LoRa Rx current: <9 mA
	87	* I/O Voltage: 3.3v
	88
146.6	89	== 1.4 Pin Mapping & LED ==
137.6	90
11.1	91
151.1	92	[[image:image-20220817085048-1.png\|\|height="533" width="734"]]
146.1	93
147.3	94
149.2	95
125.1	96	~1. The LED lights up red when there is an upstream data packet
	97	2. When the network is successfully connected, the green light will be on for 5 seconds
	98	3. Purple light on when receiving downlink data packets
11.1	99
	100
151.1	101	[[image:image-20220820112305-1.png\|\|height="515" width="749"]]
134.5	102
151.1	103
	104
146.6	105	== 1.5 Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
11.1	106
	107
134.3	108	Show connection diagram：
	109
	110
125.1	111	[[image:image-20220723170210-2.png\|\|height="908" width="681"]]
87.2	112
125.1	113
134.3	114
134.6	115	(% style="color:blue" %)1. open Arduino IDE
134.3	116
	117
125.1	118	[[image:image-20220723170545-4.png]]
	119
	120
134.3	121
134.6	122	(% style="color:blue" %)2. Open project
134.3	123
	124
134.7	125	LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
134.3	126
151.3	127
137.1	128	[[image:image-20220726135239-1.png]]
125.1	129
	130
149.3	131
134.6	132	(% style="color:blue" %)3. Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
134.3	133
151.3	134
137.1	135	[[image:image-20220726135356-2.png]]
134.3	136
125.1	137
149.3	138
134.6	139	(% style="color:blue" %)4. After the upload is successful, open the serial port monitoring and send the AT command
125.1	140
134.3	141
131.1	142	[[image:image-20220723172235-7.png\|\|height="480" width="1027"]]
125.1	143
134.3	144
	145
146.6	146	== 1.6 Example: Join TTN network and send an uplink message, get downlink message. ==
87.2	147
	148
134.6	149	(% style="color:blue" %)1. Open project
134.3	150
	151
134.7	152	Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
134.3	153
134.7	154
131.1	155	[[image:image-20220723172502-8.png]]
87.2	156
131.1	157
134.3	158
159.1	159	(% style="color:blue" %)2. Same steps as 1.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.3	160
	161
131.1	162	[[image:image-20220723172938-9.png\|\|height="652" width="1050"]]
	163
	164
134.2	165
146.6	166	== 1.7 Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
87.2	167
	168
134.6	169	(% style="color:blue" %)1. Open project
134.2	170
	171
134.7	172	Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
134.2	173
	174
131.1	175	[[image:image-20220723173341-10.png\|\|height="581" width="1014"]]
87.2	176
131.1	177
134.2	178
134.6	179	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.2	180
	181
131.1	182	[[image:image-20220723173950-11.png\|\|height="665" width="1012"]]
	183
	184
134.2	185
152.1	186
	187
134.6	188	(% style="color:blue" %)3. Integration into Node-red via TTNV3
134.2	189
133.1	190
151.3	191	For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
	192
	193
133.1	194	[[image:image-20220723175700-12.png\|\|height="602" width="995"]]
	195
159.1	196	== 1.8 Example: How to join helium ==
134.2	197
	198
159.1	199	(% style="color:blue" %)1. Create a new device.
87.2	200
159.1	201	[[image:image-20220907165500-1.png\|\|height="464" width="940"]]
87.2	202
	203
159.1	204	(% style="color:blue" %)2. Save the device after filling in the necessary information.
134.2	205
159.1	206	[[image:image-20220907165837-2.png\|\|height="375" width="809"]]
	207
	208
	209	(% style="color:blue" %)3. Use AT commands.
	210
	211	[[image:image-20220602100052-2.png\|\|height="385" width="600"]]
	212
	213
	214	(% style="color:#0000ff" %)4.Use command AT+CFG to get device configuration
	215
	216	[[image:image-20220907170308-3.png\|\|height="556" width="617"]]
	217
	218
	219	(% style="color:blue" %)5. Network successfully.
	220
	221	[[image:image-20220907170436-4.png]]
	222
	223
	224	(% style="color:blue" %)6. Send uplink using command
	225
	226	[[image:image-20220907170659-5.png]]
	227
	228	[[image:image-20220907170744-6.png\|\|height="242" width="798"]]
	229
	230
	231	== 1.9 Upgrade Firmware of LA66 LoRaWAN Shield ==
	232
	233
	234	=== 1.9.1 Items needed for update ===
	235
	236
74.1	237	1. LA66 LoRaWAN Shield
	238	1. Arduino
	239	1. USB TO TTL Adapter
13.1	240
75.1	241	[[image:image-20220602100052-2.png\|\|height="385" width="600"]]
20.1	242
	243
137.6	244
159.1	245	=== 1.9.2 Connection ===
20.1	246
87.2	247
75.1	248	[[image:image-20220602101311-3.png\|\|height="276" width="600"]]
20.1	249
	250
87.17	251	(((
87.2	252	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) <-> (% style="color:blue" %)USB TTL
87.17	253	)))
87.2	254
87.16	255	(((
87.2	256	(% style="background-color:yellow" %)**GND <-> GND
87.8	257	TXD <-> TXD
	258	RXD <-> RXD**
87.16	259	)))
87.2	260
	261
77.1	262	Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
20.1	263
75.1	264	Connect USB TTL Adapter to PC after connecting the wires
20.1	265
	266
75.1	267	[[image:image-20220602102240-4.png\|\|height="304" width="600"]]
20.1	268
	269
137.6	270
159.1	271	=== 1.9.3 Upgrade steps ===
20.1	272
	273
146.9	274
134.2	275	==== (% style="color:blue" %)1. Switch SW1 to put in ISP position(%%) ====
87.2	276
	277
75.1	278	[[image:image-20220602102824-5.png\|\|height="306" width="600"]]
32.1	279
	280
87.9	281
134.2	282	==== (% style="color:blue" %)2. Press the RST switch once(%%) ====
32.1	283
87.10	284
148.2	285	[[image:image-20220817085447-1.png]]
32.1	286
75.1	287
87.9	288
148.3	289
134.2	290	==== (% style="color:blue" %)3. Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
75.1	291
39.1	292
87.18	293	(((
151.2	294	(% style="color:blue" %)1. Software download link: (%%)[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]
87.18	295	)))
87.2	296
	297
32.1	298	[[image:image-20220602103227-6.png]]
	299
87.2	300
32.1	301	[[image:image-20220602103357-7.png]]
	302
	303
87.2	304
76.1	305	(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
87.2	306	(% style="color:blue" %)2. Select the COM port corresponding to USB TTL
76.1	307
87.2	308
32.1	309	[[image:image-20220602103844-8.png]]
	310
	311
87.2	312
76.1	313	(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
87.2	314	(% style="color:blue" %)3. Select the bin file to burn
76.1	315
87.2	316
32.1	317	[[image:image-20220602104144-9.png]]
	318
87.2	319
32.1	320	[[image:image-20220602104251-10.png]]
	321
87.2	322
32.1	323	[[image:image-20220602104402-11.png]]
	324
	325
87.2	326
76.1	327	(% class="wikigeneratedid" id="HClicktostartthedownload" %)
87.2	328	(% style="color:blue" %)4. Click to start the download
76.1	329
151.4	330
32.1	331	[[image:image-20220602104923-13.png]]
	332
	333
87.10	334
76.1	335	(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
87.2	336	(% style="color:blue" %)5. Check update process
76.1	337
87.2	338
32.1	339	[[image:image-20220602104948-14.png]]
	340
	341
87.2	342
76.1	343	(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
87.2	344	(% style="color:blue" %)The following picture shows that the burning is successful
76.1	345
151.4	346
32.1	347	[[image:image-20220602105251-15.png]]
	348
72.1	349
	350
146.7	351	= 2. FAQ =
6.1	352
7.1	353
146.7	354	== 2.1 How to Compile Source Code for LA66? ==
87.2	355
100.3	356
146.4	357	Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
137.2	358
	359
	360
146.7	361	= 3. Order Info =
137.2	362
	363
146.7	364	Part Number: (% style="color:blue" %)LA66-LoRaWAN-Shield-XXX (%%)
87.4	365
	366
87.5	367	(% style="color:blue" %)XXX(%%): The default frequency band
86.1	368
87.5	369	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	370	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	371	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
	372	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	373	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	374	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	375	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	376	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
	377	* (% style="color:red" %)PP(%%): Peer to Peer LoRa Protocol
73.1	378
146.7	379	= 4. Reference =
	380
	381
	382	* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
148.3	383
	384

Wiki source code of LA66 LoRaWAN Shield User Manual

Applications

Navigation