Wiki source code of LA66 LoRaWAN Shield User Manual

Version 152.1 by Bei Jinggeng on 2022/09/07 14:44

version	line-number	content
134.2	1
87.2	2
87.13	3	Table of Contents:
	4
1.1	5	{{toc/}}
	6
	7
6.1	8
87.2	9
146.5	10	= 1. LA66 LoRaWAN Shield =
87.2	11
	12
146.5	13	== 1.1 Overview ==
87.2	14
88.2	15
100.2	16	(((
	17	[[image:image-20220715000826-2.png\|\|height="145" width="220"]]
	18	)))
90.1	19
100.2	20	(((
	21
	22	)))
	23
	24	(((
100.4	25	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to Arduino projects.
100.2	26	)))
71.1	27
90.1	28	(((
100.2	29	(((
101.4	30	(% style="color:blue" %)LA66(%%) is a ready-to-use module that includes the (% style="color:blue" %)LoRaWAN v1.0.3 protocol(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
90.1	31	)))
100.2	32	)))
71.1	33
90.1	34	(((
100.2	35	(((
90.1	36	Each LA66 module includes a (% style="color:blue" %)world-unique OTAA key(%%) for LoRaWAN registration.
	37	)))
100.2	38	)))
90.1	39
	40	(((
100.2	41	(((
90.1	42	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)open-source peer-to-peer LoRa Protocol(%%) for the none-LoRaWAN application.
	43	)))
100.2	44	)))
90.1	45
	46	(((
100.2	47	(((
90.1	48	LA66 is equipped with (% style="color:blue" %)TCXO crystal(%%) which ensures the module can achieve stable performance in extreme temperatures.
	49	)))
100.2	50	)))
90.1	51
	52
100.2	53
146.5	54	== 1.2 Features ==
71.1	55
137.6	56
71.1	57	* Arduino Shield base on LA66 LoRaWAN module
146.10	58	* Support LoRaWAN v1.0.3 protocol
71.1	59	* Support peer-to-peer protocol
	60	* TCXO crystal to ensure RF performance on low temperature
	61	* SMA connector
	62	* Available in different frequency LoRaWAN frequency bands.
	63	* World-wide unique OTAA keys.
	64	* AT Command via UART-TTL interface
	65	* Firmware upgradable via UART interface
	66	* Ultra-long RF range
	67
148.3	68
146.5	69	== 1.3 Specification ==
	70
	71
71.1	72	* CPU: 32-bit 48 MHz
	73	* Flash: 256KB
	74	* RAM: 64KB
	75	* Input Power Range: 1.8v ~~ 3.7v
	76	* Power Consumption: < 4uA.
	77	* Frequency Range: 150 MHz ~~ 960 MHz
	78	* Maximum Power +22 dBm constant RF output
	79	* High sensitivity: -148 dBm
	80	* Temperature:
	81	** Storage: -55 ~~ +125℃
	82	** Operating: -40 ~~ +85℃
	83	* Humidity:
	84	** Storage: 5 ~~ 95% (Non-Condensing)
	85	** Operating: 10 ~~ 95% (Non-Condensing)
	86	* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	87	* LoRa Rx current: <9 mA
	88	* I/O Voltage: 3.3v
	89
146.5	90
146.6	91	== 1.4 Pin Mapping & LED ==
137.6	92
11.1	93
151.1	94	[[image:image-20220817085048-1.png\|\|height="533" width="734"]]
146.1	95
147.3	96
149.2	97
125.1	98	~1. The LED lights up red when there is an upstream data packet
	99	2. When the network is successfully connected, the green light will be on for 5 seconds
	100	3. Purple light on when receiving downlink data packets
11.1	101
	102
151.1	103	[[image:image-20220820112305-1.png\|\|height="515" width="749"]]
134.5	104
151.1	105
	106
146.6	107	== 1.5 Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
11.1	108
	109
134.3	110	Show connection diagram：
	111
	112
125.1	113	[[image:image-20220723170210-2.png\|\|height="908" width="681"]]
87.2	114
125.1	115
134.3	116
134.6	117	(% style="color:blue" %)1. open Arduino IDE
134.3	118
	119
125.1	120	[[image:image-20220723170545-4.png]]
	121
	122
134.3	123
134.6	124	(% style="color:blue" %)2. Open project
134.3	125
	126
134.7	127	LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
134.3	128
151.3	129
137.1	130	[[image:image-20220726135239-1.png]]
125.1	131
	132
149.3	133
134.6	134	(% style="color:blue" %)3. Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
134.3	135
151.3	136
137.1	137	[[image:image-20220726135356-2.png]]
134.3	138
125.1	139
149.3	140
134.6	141	(% style="color:blue" %)4. After the upload is successful, open the serial port monitoring and send the AT command
125.1	142
134.3	143
131.1	144	[[image:image-20220723172235-7.png\|\|height="480" width="1027"]]
125.1	145
134.3	146
	147
146.6	148	== 1.6 Example: Join TTN network and send an uplink message, get downlink message. ==
87.2	149
	150
134.6	151	(% style="color:blue" %)1. Open project
134.3	152
	153
134.7	154	Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
134.3	155
134.7	156
131.1	157	[[image:image-20220723172502-8.png]]
87.2	158
131.1	159
134.3	160
134.6	161	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.3	162
	163
131.1	164	[[image:image-20220723172938-9.png\|\|height="652" width="1050"]]
	165
	166
134.2	167
146.6	168	== 1.7 Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
87.2	169
	170
134.6	171	(% style="color:blue" %)1. Open project
134.2	172
	173
134.7	174	Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
134.2	175
	176
131.1	177	[[image:image-20220723173341-10.png\|\|height="581" width="1014"]]
87.2	178
131.1	179
134.2	180
134.6	181	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.2	182
	183
131.1	184	[[image:image-20220723173950-11.png\|\|height="665" width="1012"]]
	185
	186
152.1	187	LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
134.2	188
152.1	189
	190
134.6	191	(% style="color:blue" %)3. Integration into Node-red via TTNV3
134.2	192
133.1	193
151.3	194	For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
	195
	196
133.1	197	[[image:image-20220723175700-12.png\|\|height="602" width="995"]]
	198
134.2	199
	200
146.6	201	== 1.8 Upgrade Firmware of LA66 LoRaWAN Shield ==
87.2	202
	203
146.6	204	=== 1.8.1 Items needed for update ===
87.2	205
134.2	206
74.1	207	1. LA66 LoRaWAN Shield
	208	1. Arduino
	209	1. USB TO TTL Adapter
13.1	210
75.1	211	[[image:image-20220602100052-2.png\|\|height="385" width="600"]]
20.1	212
	213
137.6	214
146.6	215	=== 1.8.2 Connection ===
20.1	216
87.2	217
75.1	218	[[image:image-20220602101311-3.png\|\|height="276" width="600"]]
20.1	219
	220
87.17	221	(((
87.2	222	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) <-> (% style="color:blue" %)USB TTL
87.17	223	)))
87.2	224
87.16	225	(((
87.2	226	(% style="background-color:yellow" %)**GND <-> GND
87.8	227	TXD <-> TXD
	228	RXD <-> RXD**
87.16	229	)))
87.2	230
	231
77.1	232	Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
20.1	233
75.1	234	Connect USB TTL Adapter to PC after connecting the wires
20.1	235
	236
75.1	237	[[image:image-20220602102240-4.png\|\|height="304" width="600"]]
20.1	238
	239
137.6	240
146.8	241	=== 1.8.3 Upgrade steps ===
20.1	242
	243
146.9	244
134.2	245	==== (% style="color:blue" %)1. Switch SW1 to put in ISP position(%%) ====
87.2	246
	247
75.1	248	[[image:image-20220602102824-5.png\|\|height="306" width="600"]]
32.1	249
	250
87.9	251
134.2	252	==== (% style="color:blue" %)2. Press the RST switch once(%%) ====
32.1	253
87.10	254
148.2	255	[[image:image-20220817085447-1.png]]
32.1	256
75.1	257
87.9	258
148.3	259
134.2	260	==== (% style="color:blue" %)3. Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
75.1	261
39.1	262
87.18	263	(((
151.2	264	(% style="color:blue" %)1. Software download link: (%%)[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]
87.18	265	)))
87.2	266
	267
32.1	268	[[image:image-20220602103227-6.png]]
	269
87.2	270
32.1	271	[[image:image-20220602103357-7.png]]
	272
	273
87.2	274
76.1	275	(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
87.2	276	(% style="color:blue" %)2. Select the COM port corresponding to USB TTL
76.1	277
87.2	278
32.1	279	[[image:image-20220602103844-8.png]]
	280
	281
87.2	282
76.1	283	(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
87.2	284	(% style="color:blue" %)3. Select the bin file to burn
76.1	285
87.2	286
32.1	287	[[image:image-20220602104144-9.png]]
	288
87.2	289
32.1	290	[[image:image-20220602104251-10.png]]
	291
87.2	292
32.1	293	[[image:image-20220602104402-11.png]]
	294
	295
87.2	296
76.1	297	(% class="wikigeneratedid" id="HClicktostartthedownload" %)
87.2	298	(% style="color:blue" %)4. Click to start the download
76.1	299
151.4	300
32.1	301	[[image:image-20220602104923-13.png]]
	302
	303
87.10	304
76.1	305	(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
87.2	306	(% style="color:blue" %)5. Check update process
76.1	307
87.2	308
32.1	309	[[image:image-20220602104948-14.png]]
	310
	311
87.2	312
76.1	313	(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
87.2	314	(% style="color:blue" %)The following picture shows that the burning is successful
76.1	315
151.4	316
32.1	317	[[image:image-20220602105251-15.png]]
	318
72.1	319
	320
146.7	321	= 2. FAQ =
6.1	322
7.1	323
146.7	324	== 2.1 How to Compile Source Code for LA66? ==
87.2	325
100.3	326
146.4	327	Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
137.2	328
	329
	330
146.7	331	= 3. Order Info =
137.2	332
	333
146.7	334	Part Number: (% style="color:blue" %)LA66-LoRaWAN-Shield-XXX (%%)
87.4	335
	336
87.5	337	(% style="color:blue" %)XXX(%%): The default frequency band
86.1	338
87.5	339	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	340	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	341	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
	342	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	343	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	344	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	345	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	346	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
	347	* (% style="color:red" %)PP(%%): Peer to Peer LoRa Protocol
73.1	348
148.3	349
	350
146.7	351	= 4. Reference =
	352
	353
	354	* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
148.3	355
	356

Wiki source code of LA66 LoRaWAN Shield User Manual

Applications

Navigation