Wiki source code of LA66 LoRaWAN Shield User Manual

Version 151.3 by Xiaoling on 2022/08/22 16:15

version	line-number	content
134.2	1
87.2	2
87.13	3	Table of Contents:
	4
1.1	5	{{toc/}}
	6
	7
6.1	8
87.2	9
146.5	10	= 1. LA66 LoRaWAN Shield =
87.2	11
	12
146.5	13	== 1.1 Overview ==
87.2	14
88.2	15
100.2	16	(((
	17	[[image:image-20220715000826-2.png\|\|height="145" width="220"]]
	18	)))
90.1	19
100.2	20	(((
	21
	22	)))
	23
	24	(((
100.4	25	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to Arduino projects.
100.2	26	)))
71.1	27
90.1	28	(((
100.2	29	(((
101.4	30	(% style="color:blue" %)LA66(%%) is a ready-to-use module that includes the (% style="color:blue" %)LoRaWAN v1.0.3 protocol(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
90.1	31	)))
100.2	32	)))
71.1	33
90.1	34	(((
100.2	35	(((
90.1	36	Each LA66 module includes a (% style="color:blue" %)world-unique OTAA key(%%) for LoRaWAN registration.
	37	)))
100.2	38	)))
90.1	39
	40	(((
100.2	41	(((
90.1	42	Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)open-source peer-to-peer LoRa Protocol(%%) for the none-LoRaWAN application.
	43	)))
100.2	44	)))
90.1	45
	46	(((
100.2	47	(((
90.1	48	LA66 is equipped with (% style="color:blue" %)TCXO crystal(%%) which ensures the module can achieve stable performance in extreme temperatures.
	49	)))
100.2	50	)))
90.1	51
	52
100.2	53
146.5	54	== 1.2 Features ==
71.1	55
137.6	56
71.1	57	* Arduino Shield base on LA66 LoRaWAN module
146.10	58	* Support LoRaWAN v1.0.3 protocol
71.1	59	* Support peer-to-peer protocol
	60	* TCXO crystal to ensure RF performance on low temperature
	61	* SMA connector
	62	* Available in different frequency LoRaWAN frequency bands.
	63	* World-wide unique OTAA keys.
	64	* AT Command via UART-TTL interface
	65	* Firmware upgradable via UART interface
	66	* Ultra-long RF range
	67
148.3	68
151.2	69
146.5	70	== 1.3 Specification ==
	71
	72
71.1	73	* CPU: 32-bit 48 MHz
	74	* Flash: 256KB
	75	* RAM: 64KB
	76	* Input Power Range: 1.8v ~~ 3.7v
	77	* Power Consumption: < 4uA.
	78	* Frequency Range: 150 MHz ~~ 960 MHz
	79	* Maximum Power +22 dBm constant RF output
	80	* High sensitivity: -148 dBm
	81	* Temperature:
	82	** Storage: -55 ~~ +125℃
	83	** Operating: -40 ~~ +85℃
	84	* Humidity:
	85	** Storage: 5 ~~ 95% (Non-Condensing)
	86	** Operating: 10 ~~ 95% (Non-Condensing)
	87	* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
	88	* LoRa Rx current: <9 mA
	89	* I/O Voltage: 3.3v
	90
146.5	91
151.2	92
146.6	93	== 1.4 Pin Mapping & LED ==
137.6	94
11.1	95
151.1	96	[[image:image-20220817085048-1.png\|\|height="533" width="734"]]
146.1	97
147.3	98
149.2	99
125.1	100	~1. The LED lights up red when there is an upstream data packet
	101	2. When the network is successfully connected, the green light will be on for 5 seconds
	102	3. Purple light on when receiving downlink data packets
11.1	103
	104
151.1	105	[[image:image-20220820112305-1.png\|\|height="515" width="749"]]
134.5	106
151.1	107
	108
146.6	109	== 1.5 Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
11.1	110
	111
134.3	112	Show connection diagram：
	113
	114
125.1	115	[[image:image-20220723170210-2.png\|\|height="908" width="681"]]
87.2	116
125.1	117
134.3	118
134.6	119	(% style="color:blue" %)1. open Arduino IDE
134.3	120
	121
125.1	122	[[image:image-20220723170545-4.png]]
	123
	124
134.3	125
134.6	126	(% style="color:blue" %)2. Open project
134.3	127
	128
134.7	129	LA66-LoRaWAN-shield-AT-command-via-Arduino-UNO source code link: [[https:~~/~~/www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0>>https://www.dropbox.com/sh/cx0pspkwu62pr97/AAAbKh2ioPdZfSDtdDpooYqha?dl=0]]
134.3	130
151.3	131
137.1	132	[[image:image-20220726135239-1.png]]
125.1	133
	134
149.3	135
134.6	136	(% style="color:blue" %)3. Click the button marked 1 in the figure to compile, and after the compilation is complete, click the button marked 2 in the figure to upload
134.3	137
151.3	138
137.1	139	[[image:image-20220726135356-2.png]]
134.3	140
125.1	141
149.3	142
134.6	143	(% style="color:blue" %)4. After the upload is successful, open the serial port monitoring and send the AT command
125.1	144
134.3	145
131.1	146	[[image:image-20220723172235-7.png\|\|height="480" width="1027"]]
125.1	147
134.3	148
	149
146.6	150	== 1.6 Example: Join TTN network and send an uplink message, get downlink message. ==
87.2	151
	152
134.6	153	(% style="color:blue" %)1. Open project
134.3	154
	155
134.7	156	Join-TTN-network source code link: [[https:~~/~~/www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0>>https://www.dropbox.com/sh/0sjyncafa0gjv00/AACC2m1orov-QHRkvH8-ddCka?dl=0]]
134.3	157
134.7	158
131.1	159	[[image:image-20220723172502-8.png]]
87.2	160
131.1	161
134.3	162
134.6	163	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.3	164
	165
131.1	166	[[image:image-20220723172938-9.png\|\|height="652" width="1050"]]
	167
	168
134.2	169
146.6	170	== 1.7 Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in Node-RED. ==
87.2	171
	172
134.6	173	(% style="color:blue" %)1. Open project
134.2	174
	175
134.7	176	Log-Temperature-Sensor-and-send-data-to-TTN source code link: [[https:~~/~~/www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0>>https://www.dropbox.com/sh/0aagmrpec1lxmva/AABMXWVMSHG9dK1_Zv_7xOmCa?dl=0]]
134.2	177
	178
131.1	179	[[image:image-20220723173341-10.png\|\|height="581" width="1014"]]
87.2	180
131.1	181
134.2	182
134.6	183	(% style="color:blue" %)2. Same steps as 2.5,after opening the serial port monitoring, it will automatically connect to the network and send packets
134.2	184
	185
131.1	186	[[image:image-20220723173950-11.png\|\|height="665" width="1012"]]
	187
	188
134.2	189
134.6	190	(% style="color:blue" %)3. Integration into Node-red via TTNV3
134.2	191
133.1	192
151.3	193	For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
	194
	195
133.1	196	[[image:image-20220723175700-12.png\|\|height="602" width="995"]]
	197
134.2	198
	199
146.6	200	== 1.8 Upgrade Firmware of LA66 LoRaWAN Shield ==
87.2	201
	202
146.6	203	=== 1.8.1 Items needed for update ===
87.2	204
134.2	205
74.1	206	1. LA66 LoRaWAN Shield
	207	1. Arduino
	208	1. USB TO TTL Adapter
13.1	209
151.2	210
75.1	211	[[image:image-20220602100052-2.png\|\|height="385" width="600"]]
20.1	212
	213
137.6	214
146.6	215	=== 1.8.2 Connection ===
20.1	216
87.2	217
75.1	218	[[image:image-20220602101311-3.png\|\|height="276" width="600"]]
20.1	219
	220
87.17	221	(((
87.2	222	(% style="color:blue" %)LA66 LoRaWAN Shield(%%) <-> (% style="color:blue" %)USB TTL
87.17	223	)))
87.2	224
87.16	225	(((
87.2	226	(% style="background-color:yellow" %)**GND <-> GND
87.8	227	TXD <-> TXD
	228	RXD <-> RXD**
87.16	229	)))
87.2	230
	231
77.1	232	Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
20.1	233
75.1	234	Connect USB TTL Adapter to PC after connecting the wires
20.1	235
	236
75.1	237	[[image:image-20220602102240-4.png\|\|height="304" width="600"]]
20.1	238
	239
137.6	240
146.8	241	=== 1.8.3 Upgrade steps ===
20.1	242
	243
146.9	244
134.2	245	==== (% style="color:blue" %)1. Switch SW1 to put in ISP position(%%) ====
87.2	246
	247
75.1	248	[[image:image-20220602102824-5.png\|\|height="306" width="600"]]
32.1	249
	250
87.9	251
134.2	252	==== (% style="color:blue" %)2. Press the RST switch once(%%) ====
32.1	253
87.10	254
148.2	255	[[image:image-20220817085447-1.png]]
32.1	256
75.1	257
87.9	258
148.3	259
134.2	260	==== (% style="color:blue" %)3. Open the Upgrade tool (Tremo Programmer) in PC and Upgrade(%%) ====
75.1	261
39.1	262
87.18	263	(((
151.2	264	(% style="color:blue" %)1. Software download link: (%%)[[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]
87.18	265	)))
87.2	266
	267
32.1	268	[[image:image-20220602103227-6.png]]
	269
87.2	270
32.1	271	[[image:image-20220602103357-7.png]]
	272
	273
87.2	274
76.1	275	(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
87.2	276	(% style="color:blue" %)2. Select the COM port corresponding to USB TTL
76.1	277
87.2	278
32.1	279	[[image:image-20220602103844-8.png]]
	280
	281
87.2	282
76.1	283	(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
87.2	284	(% style="color:blue" %)3. Select the bin file to burn
76.1	285
87.2	286
32.1	287	[[image:image-20220602104144-9.png]]
	288
87.2	289
32.1	290	[[image:image-20220602104251-10.png]]
	291
87.2	292
32.1	293	[[image:image-20220602104402-11.png]]
	294
	295
87.2	296
76.1	297	(% class="wikigeneratedid" id="HClicktostartthedownload" %)
87.2	298	(% style="color:blue" %)4. Click to start the download
76.1	299
32.1	300	[[image:image-20220602104923-13.png]]
	301
	302
87.10	303
76.1	304	(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
87.2	305	(% style="color:blue" %)5. Check update process
76.1	306
87.2	307
32.1	308	[[image:image-20220602104948-14.png]]
	309
	310
87.2	311
76.1	312	(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
87.2	313	(% style="color:blue" %)The following picture shows that the burning is successful
76.1	314
32.1	315	[[image:image-20220602105251-15.png]]
	316
72.1	317
	318
146.7	319	= 2. FAQ =
6.1	320
7.1	321
146.7	322	== 2.1 How to Compile Source Code for LA66? ==
87.2	323
100.3	324
146.4	325	Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
137.2	326
	327
	328
146.7	329	= 3. Order Info =
137.2	330
	331
146.7	332	Part Number: (% style="color:blue" %)LA66-LoRaWAN-Shield-XXX (%%)
87.4	333
	334
87.5	335	(% style="color:blue" %)XXX(%%): The default frequency band
86.1	336
87.5	337	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	338	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	339	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
	340	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	341	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	342	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	343	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	344	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
	345	* (% style="color:red" %)PP(%%): Peer to Peer LoRa Protocol
73.1	346
148.3	347
	348
146.7	349	= 4. Reference =
	350
	351
	352	* Hardware Design File for LA66 LoRaWAN Shield : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
148.3	353
	354

Wiki source code of LA66 LoRaWAN Shield User Manual

Applications

Navigation